all: Use the name MicroPython consistently in comments

There were several different spellings of MicroPython present in comments,
when there should be only one.
This commit is contained in:
Alexander Steffen 2017-06-30 09:22:17 +02:00 committed by Damien George
parent bbced3b4bb
commit 55f33240f3
433 changed files with 504 additions and 504 deletions

View File

@ -37,7 +37,7 @@ ENTRY(ResetISR)
SECTIONS
{
/* place the FreeRTOS heap (the micropython stack will live here) */
/* place the FreeRTOS heap (the MicroPython stack will live here) */
.rtos_heap (NOLOAD) :
{
. = ALIGN(8);
@ -83,7 +83,7 @@ SECTIONS
} > SRAM
/* place here functions that are only called during boot up, */
/* that way, we can re-use this area for the micropython heap */
/* that way, we can re-use this area for the MicroPython heap */
.boot :
{
. = ALIGN(8);
@ -93,7 +93,7 @@ SECTIONS
_eboot = .;
} > SRAM
/* allocate the micropython heap */
/* allocate the MicroPython heap */
.heap :
{
. = ALIGN(8);

View File

@ -28,7 +28,7 @@
/*
Wrapper to setup HSPI/SPI GPIO pins and default SPI clock
spi_no - SPI (0) or HSPI (1)
Not used in Micropython.
Not used in MicroPython.
*/
void spi_init(uint8_t spi_no) {
spi_init_gpio(spi_no, SPI_CLK_USE_DIV);
@ -48,7 +48,7 @@ Configures SPI mode parameters for clock edge and clock polarity.
(1) Data is valid on clock trailing edge
spi_cpol - (0) Clock is low when inactive
(1) Clock is high when inactive
For Micropython this version is different from original.
For MicroPython this version is different from original.
*/
void spi_mode(uint8_t spi_no, uint8_t spi_cpha, uint8_t spi_cpol) {
if (spi_cpol) {
@ -99,7 +99,7 @@ void spi_init_gpio(uint8_t spi_no, uint8_t sysclk_as_spiclk) {
// GPIO14 is HSPI CLK pin (Clock)
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTMS_U, 2);
// GPIO15 is HSPI CS pin (Chip Select / Slave Select)
// In Micropython, we are handling CS ourself in drivers.
// In MicroPython, we are handling CS ourself in drivers.
// PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, 2);
}
}

View File

@ -55,7 +55,7 @@ CFLAGS += -U _FORTIFY_SOURCE
endif
# On OSX, 'gcc' is a symlink to clang unless a real gcc is installed.
# The unix port of micropython on OSX must be compiled with clang,
# The unix port of MicroPython on OSX must be compiled with clang,
# while cross-compile ports require gcc, so we test here for OSX and
# if necessary override the value of 'CC' set in py/mkenv.mk
ifeq ($(UNAME_S),Darwin)

View File

@ -44,7 +44,7 @@ COPT = -Os #-DNDEBUG
endif
# On OSX, 'gcc' is a symlink to clang unless a real gcc is installed.
# The unix port of micropython on OSX must be compiled with clang,
# The unix port of MicroPython on OSX must be compiled with clang,
# while cross-compile ports require gcc, so we test here for OSX and
# if necessary override the value of 'CC' set in py/mkenv.mk
ifeq ($(UNAME_S),Darwin)

View File

@ -46,7 +46,7 @@
#include "py/gc.h"
// We redirect standard alloc functions to GC heap - just for the rest of
// this module. In the rest of micropython source, system malloc can be
// this module. In the rest of MicroPython source, system malloc can be
// freely accessed - for interfacing with system and 3rd-party libs for
// example. On the other hand, some (e.g. bare-metal) ports may use GC
// heap as system heap, so, to avoid warnings, we do undef's first.

View File

@ -47,7 +47,7 @@ $(BUILD)/%.o: %.c
$(call compile_c)
# List all native flags since the current build system doesn't have
# the micropython configuration available. However, these flags are
# the MicroPython configuration available. However, these flags are
# needed to extract all qstrings
QSTR_GEN_EXTRA_CFLAGS += -DNO_QSTR -DN_X64 -DN_X86 -DN_THUMB -DN_ARM -DN_XTENSA
QSTR_GEN_EXTRA_CFLAGS += -I$(BUILD)/tmp

View File

@ -1370,7 +1370,7 @@ void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
/**
* @}
*/
/* Functions added by micropython */
/* Functions added by MicroPython */
uint32_t HAL_UART_CalcBrr(uint32_t fck, uint32_t baud);
#ifdef __cplusplus

View File

@ -2104,7 +2104,7 @@ static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
/**
* @brief Calculate register BRR value without using uint64.
* @note This function is added by the micropython project.
* @note This function is added by the MicroPython project.
* @param fck: Input clock frequency to the uart block in Hz.
* @param baud: baud rate should be one of {300, 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200}.
* @retval BRR value

View File

@ -154,7 +154,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_0(pyb_sync_obj, pyb_sync);
/// \function millis()
/// Returns the number of milliseconds since the board was last reset.
///
/// The result is always a micropython smallint (31-bit signed number), so
/// The result is always a MicroPython smallint (31-bit signed number), so
/// after 2^30 milliseconds (about 12.4 days) this will start to return
/// negative numbers.
STATIC mp_obj_t pyb_millis(void) {
@ -185,7 +185,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_elapsed_millis_obj, pyb_elapsed_millis);
/// \function micros()
/// Returns the number of microseconds since the board was last reset.
///
/// The result is always a micropython smallint (31-bit signed number), so
/// The result is always a MicroPython smallint (31-bit signed number), so
/// after 2^30 microseconds (about 17.8 minutes) this will start to return
/// negative numbers.
STATIC mp_obj_t pyb_micros(void) {

View File

@ -36,7 +36,7 @@ print(a.read())
a = io.StringIO()
a.close()
for f in [a.read, a.getvalue, lambda:a.write("")]:
# CPython throws for operations on closed I/O, micropython makes
# CPython throws for operations on closed I/O, MicroPython makes
# the underlying string empty unless MICROPY_CPYTHON_COMPAT defined
try:
f()

View File

@ -33,7 +33,7 @@ import time
import re
from collections import namedtuple
# Micropython supports syntax of CPython 3.4 with some features from 3.5, and
# MicroPython supports syntax of CPython 3.4 with some features from 3.5, and
# such version should be used to test for differences. If your default python3
# executable is of lower version, you can point MICROPY_CPYTHON3 environment var
# to the correct executable.

View File

@ -59,7 +59,7 @@ CFLAGS += -U _FORTIFY_SOURCE
endif
# On OSX, 'gcc' is a symlink to clang unless a real gcc is installed.
# The unix port of micropython on OSX must be compiled with clang,
# The unix port of MicroPython on OSX must be compiled with clang,
# while cross-compile ports require gcc, so we test here for OSX and
# if necessary override the value of 'CC' set in py/mkenv.mk
ifeq ($(UNAME_S),Darwin)