diff --git a/locale/ID.po b/locale/ID.po index e111233982..3e07620698 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -344,6 +344,10 @@ msgstr "Semua perangkat UART sedang digunakan" msgid "All event channels in use" msgstr "Semua channel event sedang digunakan" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Semua channel event yang disinkronisasi sedang digunakan" @@ -392,6 +396,7 @@ msgstr "AnalogIn tidak didukung pada pin yang diberikan" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "fungsionalitas AnalogOut tidak didukung" @@ -593,6 +598,7 @@ msgstr "Tidak dapat menghapus nilai" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Tidak bisa mendapatkan pull pada saat mode output" @@ -882,7 +888,8 @@ msgstr "Error pada regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1064,6 +1071,10 @@ msgstr "operasi I/O pada file tertutup" msgid "I2C Init Error" msgstr "Gagal Inisialisasi I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1089,6 +1100,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Ukuran penyangga salah" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1101,6 +1116,31 @@ msgstr "" msgid "Input/output error" msgstr "Kesalahan input/output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Otentikasi tidak cukup" @@ -1152,7 +1192,7 @@ msgstr "Pin DAC yang diberikan tidak valid" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frekuensi PWM tidak valid" @@ -1246,6 +1286,8 @@ msgstr "Pin untuk channel kanan tidak valid" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Pin-pin tidak valid" @@ -1367,6 +1409,36 @@ msgstr "Penundaan mulai mikrofon harus dalam kisaran 0,0 hingga 1,0" msgid "Missing MISO or MOSI Pin" msgstr "Tidak menemukan Pin MISO atau MOSI" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Harus berupa subclass %q." @@ -1420,14 +1492,14 @@ msgstr "Tidak ada Pin MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Tidak pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Tidak ada pin TX" @@ -1484,6 +1556,10 @@ msgstr "Tidak ada lagi penghitung waktu yang tersedia pada pin ini." msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Tidak ada pull-down pada pin; 1Mohm direkomendasikan" @@ -1541,6 +1617,10 @@ msgstr "Parity ganjil tidak didukung" msgid "Only 8 or 16 bit mono with " msgstr "Hanya 8 atau 16 bit mono dengan " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1619,6 +1699,7 @@ msgstr "" "konstruksi." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus belum didukung" @@ -1631,11 +1712,20 @@ msgstr "" msgid "Permission denied" msgstr "Izin ditolak" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)" @@ -1699,10 +1789,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull tidak digunakan saat arah output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Kesalahan DeInit RNG" @@ -1786,6 +1900,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA atau SCL membutuhkan pull up" @@ -1807,6 +1922,10 @@ msgstr "Kesalahan Init SPI" msgid "SPI Re-initialization error" msgstr "Kesalahan Inisialisasi ulang SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Tingkat sampel harus positif" @@ -1837,6 +1956,14 @@ msgstr "Serializer sedang digunakan" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -2009,6 +2136,10 @@ msgstr "Kesalahan Init UART" msgid "UART Re-init error" msgstr "Kesalahan Re-init UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Kesalahan penulisan UART" @@ -2115,7 +2246,8 @@ msgstr "" "perangkat lain ditolak atau diabaikan." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate tidak didukung" @@ -2167,6 +2299,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3556,6 +3689,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3573,6 +3707,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "antrian meluap (overflow)" @@ -3776,6 +3918,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index 9181d1f709..e6ad0a83f7 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -342,6 +342,10 @@ msgstr "" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -390,6 +394,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -589,6 +594,7 @@ msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -866,7 +872,8 @@ msgstr "" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1048,6 +1055,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1071,6 +1082,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1083,6 +1098,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1134,7 +1174,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1228,6 +1268,8 @@ msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "" @@ -1349,6 +1391,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1402,14 +1474,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1466,6 +1538,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1521,6 +1597,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1593,6 +1673,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1605,11 +1686,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1670,10 +1760,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1756,6 +1870,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1777,6 +1892,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1807,6 +1926,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1971,6 +2098,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2075,7 +2206,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2126,6 +2258,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3507,6 +3640,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3524,6 +3658,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3727,6 +3869,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 8d8f2d5210..e23f27bfe3 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -343,6 +343,10 @@ msgstr "Alle UART-Peripheriegeräte sind in Benutzung" msgid "All event channels in use" msgstr "Alle event Kanäle werden benutzt" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alle sync event Kanäle werden benutzt" @@ -391,6 +395,7 @@ msgstr "AnalogIn ist an diesem Pin nicht unterstützt" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut-Funktion wird nicht unterstützt" @@ -594,6 +599,7 @@ msgstr "Kann Werte nicht löschen" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Pull up im Ausgabemodus nicht möglich" @@ -878,7 +884,8 @@ msgstr "Fehler in regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1063,6 +1070,10 @@ msgstr "Lese/Schreibe-operation an geschlossener Datei" msgid "I2C Init Error" msgstr "I2C-Init-Fehler" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut nicht verfügbar" @@ -1088,6 +1099,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Inkorrekte Puffergröße" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Initialisierung aufgrund von Speichermangel fehlgeschlagen" @@ -1100,6 +1115,31 @@ msgstr "" msgid "Input/output error" msgstr "Eingabe-/Ausgabefehler" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Unzureichende Authentifizierung" @@ -1151,7 +1191,7 @@ msgstr "Ungültiger DAC-Pin angegeben" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ungültige PWM Frequenz" @@ -1245,6 +1285,8 @@ msgstr "Ungültiger Pin für rechten Kanal" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Ungültige Pins" @@ -1368,6 +1410,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "Fehlender MISO- oder MOSI-Pin" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Muss eine %q Unterklasse sein." @@ -1421,14 +1493,14 @@ msgstr "Kein MOSI Pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Kein RX Pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Kein TX Pin" @@ -1485,6 +1557,10 @@ msgstr "An diesem Pin sind keine Timer mehr verfügbar." msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Kein Pulldown Widerstand am Pin; 1Mohm wird vorgeschlagen" @@ -1542,6 +1618,10 @@ msgstr "Eine ungerade Parität wird nicht unterstützt" msgid "Only 8 or 16 bit mono with " msgstr "Nur 8 oder 16 bit mono mit " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1618,6 +1698,7 @@ msgid "" msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus wird noch nicht unterstützt" @@ -1630,11 +1711,20 @@ msgstr "" msgid "Permission denied" msgstr "Zugang verweigert" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin hat keine ADC Funktionalität" @@ -1698,10 +1788,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull wird nicht verwendet, wenn die Richtung output ist." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-Fehler" @@ -1784,6 +1898,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA oder SCL brauchen pull up" @@ -1805,6 +1920,10 @@ msgstr "SPI-Init-Fehler" msgid "SPI Re-initialization error" msgstr "SPI-Neuinitialisierungsfehler" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Abtastrate muss positiv sein" @@ -1835,6 +1954,14 @@ msgstr "Serializer wird benutzt" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -2013,6 +2140,10 @@ msgstr "UART Init Fehler" msgid "UART Re-init error" msgstr "UART Re-Init-Fehler" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART-Schreibfehler" @@ -2121,7 +2252,8 @@ msgstr "" "Eingabeaufforderung auf dem anderen Gerät abgelehnt oder ignoriert." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate wird nicht unterstützt" @@ -2173,6 +2305,7 @@ msgstr "" "WARNUNG: Der Dateiname deines Programms hat zwei Dateityperweiterungen\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3587,6 +3720,7 @@ msgstr "pow () mit 3 Argumenten erfordert Integer" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3604,6 +3738,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "Warteschlangenüberlauf" @@ -3810,6 +3952,7 @@ msgstr "time.struct_time() nimmt eine 9-Sequenz an" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten" diff --git a/locale/el.po b/locale/el.po index 04b63261ea..0c7cb5f6bb 100644 --- a/locale/el.po +++ b/locale/el.po @@ -339,6 +339,10 @@ msgstr "" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -387,6 +391,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -586,6 +591,7 @@ msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -863,7 +869,8 @@ msgstr "" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1045,6 +1052,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1068,6 +1079,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1080,6 +1095,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1131,7 +1171,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1225,6 +1265,8 @@ msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "" @@ -1346,6 +1388,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1399,14 +1471,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1463,6 +1535,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1518,6 +1594,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1590,6 +1670,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1602,11 +1683,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1667,10 +1757,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1753,6 +1867,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1774,6 +1889,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1804,6 +1923,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1968,6 +2095,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2072,7 +2203,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2123,6 +2255,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3504,6 +3637,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3521,6 +3655,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3724,6 +3866,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/es.po b/locale/es.po index 29b238768a..b446ceb484 100644 --- a/locale/es.po +++ b/locale/es.po @@ -344,6 +344,10 @@ msgstr "Todos los periféricos UART están siendo usados" msgid "All event channels in use" msgstr "Todos los canales de eventos estan siendo usados" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -394,6 +398,7 @@ msgstr "El pin proporcionado no soporta AnalogIn" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Funcionalidad AnalogOut no soportada" @@ -597,6 +602,7 @@ msgstr "No se puede eliminar valores" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "No puede ser pull mientras este en modo de salida" @@ -880,7 +886,8 @@ msgstr "Error en regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1063,6 +1070,10 @@ msgstr "Operación I/O en archivo cerrado" msgid "I2C Init Error" msgstr "I2C Error de inicio" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut no disponible" @@ -1088,6 +1099,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Tamaño incorrecto del buffer" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Inicializacion fallida por falta de memoria" @@ -1100,6 +1115,31 @@ msgstr "La entrada está durando mucho tiempo" msgid "Input/output error" msgstr "error Input/output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Autenticación insuficiente" @@ -1151,7 +1191,7 @@ msgstr "Pin suministrado inválido para DAC" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frecuencia PWM inválida" @@ -1245,6 +1285,8 @@ msgstr "Pin inválido para canal derecho" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "pines inválidos" @@ -1366,6 +1408,36 @@ msgstr "Micrófono demora de inicio debe estar en el rango 0.0 a 1.0" msgid "Missing MISO or MOSI Pin" msgstr "Falta el pin MISO o MOSI" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Debe de ser una subclase de %q." @@ -1419,14 +1491,14 @@ msgstr "Sin pin MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Sin pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Sin pin TX" @@ -1483,6 +1555,10 @@ msgstr "No hay más temporizadores disponibles en este pin." msgid "No network with that ssid" msgstr "No hay una red con ese ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "No hay pulldown en el pin; 1Mohm recomendado" @@ -1540,6 +1616,10 @@ msgstr "Paridad impar no soportada" msgid "Only 8 or 16 bit mono with " msgstr "Solo mono de 8 ó 16 bit con " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Solo hay capacidad para direcciones IPv4" @@ -1618,6 +1698,7 @@ msgstr "" "construcción." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus todavía no soportado" @@ -1630,11 +1711,20 @@ msgstr "" msgid "Permission denied" msgstr "Permiso denegado" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin no tiene capacidad ADC" @@ -1702,10 +1792,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull no se usa cuando la dirección es output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Error de desinicialización de RNG" @@ -1788,6 +1902,7 @@ msgstr "Sin capacidad para formato CSD para tarjeta SD" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA o SCL necesitan una pull up" @@ -1809,6 +1924,10 @@ msgstr "Error de inicio de SPI" msgid "SPI Re-initialization error" msgstr "Error de reinicialización de SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate debe ser positivo" @@ -1839,6 +1958,14 @@ msgstr "Serializer está siendo utilizado" msgid "Server side context cannot have hostname" msgstr "El contexto del lado del servidor no puede tener un hostname" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Sin capacidades para el tamaño" @@ -2017,6 +2144,10 @@ msgstr "Error de inicialización de UART" msgid "UART Re-init error" msgstr "Error de reinicialización de UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Error de escritura UART" @@ -2123,7 +2254,8 @@ msgstr "" "dispositivo fue denegada o ignorada." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate no soportado" @@ -2174,6 +2306,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "ADVERTENCIA: El nombre de archivo de tu código tiene dos extensiones\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "WatchDogTimer no se puede desinicializar luego de definirse en modo RESET" @@ -3577,6 +3710,7 @@ msgstr "pow() con 3 argumentos requiere enteros" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3594,6 +3728,14 @@ msgstr "presionando botón de arranque al inicio.\n" msgid "pressing both buttons at start up.\n" msgstr "presionando ambos botones al inicio.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "desbordamiento de cola(queue)" @@ -3799,6 +3941,7 @@ msgstr "time.struct_time() toma un sequencio 9" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" "la duración de tiempo de espera ha excedido la capacidad máxima del valor" diff --git a/locale/fil.po b/locale/fil.po index 2fdcd2f048..bba9761ad9 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -342,6 +342,10 @@ msgstr "Lahat ng I2C peripherals ginagamit" msgid "All event channels in use" msgstr "Lahat ng event channels ginagamit" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Lahat ng sync event channels ay ginagamit" @@ -390,6 +394,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Hindi supportado ang AnalogOut" @@ -592,6 +597,7 @@ msgstr "Hindi mabura ang values" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Hindi makakakuha ng pull habang nasa output mode" @@ -874,7 +880,8 @@ msgstr "May pagkakamali sa REGEX" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1058,6 +1065,10 @@ msgstr "I/O operasyon sa saradong file" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1083,6 +1094,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1095,6 +1110,31 @@ msgstr "" msgid "Input/output error" msgstr "May mali sa Input/Output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1146,7 +1186,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Mali ang PWM frequency" @@ -1240,6 +1280,8 @@ msgstr "Mali ang pin para sa kanang channel" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Mali ang pins" @@ -1361,6 +1403,36 @@ msgstr "Ang delay ng startup ng mikropono ay dapat na nasa 0.0 hanggang 1.0" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1414,14 +1486,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Walang RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Walang TX pin" @@ -1478,6 +1550,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1536,6 +1612,10 @@ msgstr "Odd na parity ay hindi supportado" msgid "Only 8 or 16 bit mono with " msgstr "Tanging 8 o 16 na bit mono na may " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1609,6 +1689,7 @@ msgstr "" "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1621,11 +1702,20 @@ msgstr "" msgid "Permission denied" msgstr "Walang pahintulot" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Ang pin ay walang kakayahan sa ADC" @@ -1686,10 +1776,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull hindi ginagamit kapag ang direksyon ay output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1773,6 +1887,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "Kailangan ng pull up resistors ang SDA o SCL" @@ -1794,6 +1909,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate ay dapat positibo" @@ -1824,6 +1943,14 @@ msgstr "Serializer ginagamit" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1988,6 +2115,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2093,7 +2224,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Hindi supportadong baudrate" @@ -2147,6 +2279,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "BABALA: Ang pangalan ng file ay may dalawang extension\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3553,6 +3686,7 @@ msgstr "pow() na may 3 argumento kailangan ng integers" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3570,6 +3704,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "puno na ang pila (overflow)" @@ -3776,6 +3918,7 @@ msgstr "time.struct_time() kumukuha ng 9-sequence" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index 1842d6d3e5..83af1f9f7c 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,8 +8,8 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-17 12:55+0000\n" -"Last-Translator: Hugo Dahl \n" +"PO-Revision-Date: 2021-01-30 02:32+0000\n" +"Last-Translator: Antonin ENFRUN \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" @@ -54,7 +54,7 @@ msgstr " Fichier \"%q\", ligne %d" #: py/builtinhelp.c msgid " is of type %q\n" -msgstr "" +msgstr " est de type %q\n" #: main.c msgid " output:\n" @@ -70,6 +70,8 @@ msgstr "%%c nécessite un chiffre entier 'int' ou un caractère 'char'" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d broches d'adresse, %d broches RGB et %d pour tile indique une hauteur de " +"%d, et non %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -348,6 +350,10 @@ msgstr "Tous les périphériques UART sont utilisés" msgid "All event channels in use" msgstr "Tous les canaux d'événements sont utilisés" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Tous les canaux d'événements sync (sync event channels) sont utilisés" @@ -396,6 +402,7 @@ msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Fonctionnalité AnalogOut non supportée" @@ -606,6 +613,7 @@ msgstr "Impossible de supprimer les valeurs" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Ne peut être tiré ('pull') en mode sortie ('output')" @@ -832,7 +840,7 @@ msgstr "La broche 'Data 0' doit être aligné sur l'octet" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "La broche Data 0 doit être aligné sur l'octet." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -891,9 +899,10 @@ msgstr "Erreur dans l'expression régulière" #: shared-bindings/socketpool/Socket.c msgid "Error: Failure to bind" -msgstr "" +msgstr "Erreur : Impossible de lier" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1078,6 +1087,10 @@ msgstr "Opération d'E/S sur un fichier fermé" msgid "I2C Init Error" msgstr "Erreur d'initialisation I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut n'est pas disponible" @@ -1103,6 +1116,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Taille de tampon incorrecte" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Échec d'initialisation par manque de mémoire" @@ -1115,6 +1132,31 @@ msgstr "L'entrée prend trop de temps" msgid "Input/output error" msgstr "Erreur d'entrée/sortie" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Authentification insuffisante" @@ -1166,7 +1208,7 @@ msgstr "Broche DAC non valide fournie" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Fréquence de PWM invalide" @@ -1260,6 +1302,8 @@ msgstr "Broche invalide pour le canal droit" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Broches invalides" @@ -1290,7 +1334,7 @@ msgstr "Taille invalide" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Invalid socket for TLS" -msgstr "" +msgstr "Socket non valide pour TLS" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" @@ -1298,7 +1342,7 @@ msgstr "État invalide" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Invalid use of TLS Socket" -msgstr "" +msgstr "Utilisation incorrecte de socket TLS" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" @@ -1318,7 +1362,7 @@ msgstr "Longueur de mot / bit invalide" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Issue setting SO_REUSEADDR" -msgstr "" +msgstr "Problème en activant SO_REUSEADDR" #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" @@ -1381,6 +1425,36 @@ msgstr "Le délais au démarrage du micro doit être entre 0.0 et 1.0" msgid "Missing MISO or MOSI Pin" msgstr "Broche MISO ou MOSI manquante" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Doit être une sous-classe de %q." @@ -1434,14 +1508,14 @@ msgstr "Pas de broche MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Pas de broche RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Pas de broche TX" @@ -1498,6 +1572,10 @@ msgstr "Plus de minuteurs disponibles sur cette broche." msgid "No network with that ssid" msgstr "Aucun réseau avec ce ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Pas de pulldown sur la broche ; 1Mohm recommandé" @@ -1555,6 +1633,10 @@ msgstr "Parité impaire non supportée" msgid "Only 8 or 16 bit mono with " msgstr "Uniquement 8 ou 16 bit mono avec " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Seulement les adresses IPv4 sont supportées" @@ -1635,6 +1717,7 @@ msgstr "" "à la construction." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus pas encore supporté" @@ -1647,11 +1730,20 @@ msgstr "Périphérique en utilisation" msgid "Permission denied" msgstr "Permission refusée" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "La broche 'pin' ne supporte pas les capacitées ADC" @@ -1722,10 +1814,34 @@ msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" "Feinte de someil profond jusqu'à l'alarme, CTRL-C ou écriture au fichier.\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erreur de désinitiation du RNG (RNG DeInit)" @@ -1808,6 +1924,7 @@ msgstr "Le format de carte SD CSD n'est pas supporté" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" @@ -1829,6 +1946,10 @@ msgstr "Erreur d'initialisation SPI" msgid "SPI Re-initialization error" msgstr "Erreur de réinitialisation SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Le taux d'échantillonage doit être positif" @@ -1859,6 +1980,14 @@ msgstr "Sérialiseur en cours d'utilisation" msgid "Server side context cannot have hostname" msgstr "Un contexte niveau serveur ne peut avoir de hostname" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Taille n'est pas supportée" @@ -2035,6 +2164,10 @@ msgstr "Erreur d'initialisation UART" msgid "UART Re-init error" msgstr "Erreur de réinitialisation UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Erreur d'écriture UART" @@ -2145,7 +2278,8 @@ msgstr "" "appareil ait été refusée ou ignorée." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Débit en bauds non supporté" @@ -2197,6 +2331,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "ATTENTION : le nom de fichier de votre code a deux extensions\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "WatchDogTimer ne peut pas être désinitialisé une fois que le mode est réglé " @@ -3423,7 +3558,7 @@ msgstr "le nombre de points doit être d'au moins 2" #: py/builtinhelp.c msgid "object " -msgstr "" +msgstr "objet " #: py/obj.c msgid "object '%q' is not a tuple or list" @@ -3612,6 +3747,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3629,6 +3765,14 @@ msgstr "bouton boot appuyé lors du démarrage.\n" msgid "pressing both buttons at start up.\n" msgstr "les deux boutons appuyés lors du démarrage.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "dépassement de file" @@ -3827,7 +3971,7 @@ msgstr "le seuil doit être dans la portée 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "tile doit être plus que zéro" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -3835,6 +3979,7 @@ msgstr "time.struct_time() prend une séquence de longueur 9" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge" @@ -4047,11 +4192,11 @@ msgstr "watchdog timeout doit être supérieur à 0" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" -msgstr "width doit être plus grand que zero" +msgstr "width doit être plus que zero" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "wifi is not enabled" -msgstr "" +msgstr "wifi n’est pas activé" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" diff --git a/locale/hi.po b/locale/hi.po index 88c82d4b80..5150d164e1 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -339,6 +339,10 @@ msgstr "" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -387,6 +391,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -586,6 +591,7 @@ msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -863,7 +869,8 @@ msgstr "" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1045,6 +1052,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1068,6 +1079,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1080,6 +1095,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1131,7 +1171,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1225,6 +1265,8 @@ msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "" @@ -1346,6 +1388,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1399,14 +1471,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1463,6 +1535,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1518,6 +1594,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1590,6 +1670,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1602,11 +1683,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1667,10 +1757,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1753,6 +1867,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1774,6 +1889,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1804,6 +1923,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1968,6 +2095,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2072,7 +2203,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2123,6 +2255,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3504,6 +3637,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3521,6 +3655,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3724,6 +3866,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index b380b2fae1..cecfe11298 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -341,6 +341,10 @@ msgstr "Tutte le periferiche I2C sono in uso" msgid "All event channels in use" msgstr "Tutti i canali eventi utilizati" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Tutti i canali di eventi sincronizzati in uso" @@ -389,6 +393,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "funzionalità AnalogOut non supportata" @@ -592,6 +597,7 @@ msgstr "Impossibile cancellare valori" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "non si può tirare quando nella modalita output" @@ -874,7 +880,8 @@ msgstr "Errore nella regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1058,6 +1065,10 @@ msgstr "operazione I/O su file chiuso" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1083,6 +1094,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1095,6 +1110,31 @@ msgstr "" msgid "Input/output error" msgstr "Errore input/output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1146,7 +1186,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frequenza PWM non valida" @@ -1242,6 +1282,8 @@ msgstr "Pin non valido per il canale destro" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Pin non validi" @@ -1365,6 +1407,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1418,14 +1490,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nessun pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Nessun pin TX" @@ -1482,6 +1554,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1541,6 +1617,10 @@ msgstr "operazione I2C non supportata" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1618,6 +1698,7 @@ msgstr "" "impostato nel costruttore a False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1630,11 +1711,20 @@ msgstr "" msgid "Permission denied" msgstr "Permesso negato" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Il pin non ha capacità di ADC" @@ -1696,10 +1786,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1783,6 +1897,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA o SCL necessitano un pull-up" @@ -1804,6 +1919,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c #, fuzzy msgid "Sample rate must be positive" @@ -1836,6 +1955,14 @@ msgstr "Serializer in uso" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -2000,6 +2127,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2105,7 +2236,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "baudrate non supportato" @@ -2157,6 +2289,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "ATTENZIONE: Il nome del sorgente ha due estensioni\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3561,6 +3694,7 @@ msgstr "pow() con 3 argomenti richiede interi" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3578,6 +3712,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "overflow della coda" @@ -3784,6 +3926,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index bae5704a12..c139ec3cc8 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -344,6 +344,10 @@ msgstr "全てのUART周辺機器が使用中" msgid "All event channels in use" msgstr "全てのイベントチャネルが使用中" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "全ての同期イベントチャネルが使用中" @@ -392,6 +396,7 @@ msgstr "指定のピンはAnalogInに対応していません" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut機能に対応していません" @@ -595,6 +600,7 @@ msgstr "値を削除できません" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "出力モード時はpullを取得できません" @@ -874,7 +880,8 @@ msgstr "正規表現にエラーがあります" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1056,6 +1063,10 @@ msgstr "閉じられたファイルへのI/O操作" msgid "I2C Init Error" msgstr "I2C初期化エラー" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOutが利用できません" @@ -1081,6 +1092,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "バッファサイズが正しくありません" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1093,6 +1108,31 @@ msgstr "" msgid "Input/output error" msgstr "入力/出力エラー" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "認証が不十分" @@ -1144,7 +1184,7 @@ msgstr "不正なDACピンが与えられました" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "無効なPWM周波数" @@ -1238,6 +1278,8 @@ msgstr "右チャネルのピンが不正" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "ピンが不正" @@ -1359,6 +1401,36 @@ msgstr "マイクのスタートアップディレイは 0.0 から 1.0 の間 msgid "Missing MISO or MOSI Pin" msgstr "MISOまたはMOSIピンがありません" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "%q のサブクラスでなければなりません" @@ -1412,14 +1484,14 @@ msgstr "MOSIピンがありません" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "RXピンがありません" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "TXピンがありません" @@ -1476,6 +1548,10 @@ msgstr "このピンには使えるタイマーがもうありません" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "ピンにプルダウンがありません。1Mオーム推奨" @@ -1533,6 +1609,10 @@ msgstr "奇数パリティには対応していません" msgid "Only 8 or 16 bit mono with " msgstr "8または16ビットの " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1606,6 +1686,7 @@ msgid "" msgstr "PWM周波数は生成時のvariable_frequencyがFalseのとき書き換え不可" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBusにはまだ対応していません" @@ -1618,11 +1699,20 @@ msgstr "" msgid "Permission denied" msgstr "パーミッション拒否" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "ピンにADCの能力がありません" @@ -1683,10 +1773,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "方向がoutputのときpullは使われません" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG解体エラー" @@ -1769,6 +1883,7 @@ msgstr "SDカードのCSDフォーマットは非対応" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDAとSCLにプルアップが必要" @@ -1790,6 +1905,10 @@ msgstr "SPI初期化エラー" msgid "SPI Re-initialization error" msgstr "SPI再初期化エラー" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "サンプルレートは正数でなければなりません" @@ -1820,6 +1939,14 @@ msgstr "シリアライザは使用中" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "サイズは対応していません" @@ -1990,6 +2117,10 @@ msgstr "UARTの初期化エラー" msgid "UART Re-init error" msgstr "UARTの再初期化エラー" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART書き込みエラー" @@ -2095,7 +2226,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "非対応のbaudrate" @@ -2146,6 +2278,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3534,6 +3667,7 @@ msgstr "pow()の第3引数には整数が必要" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3551,6 +3685,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "キューがオーバーフローしました" @@ -3755,6 +3897,7 @@ msgstr "time.struct_time()は9要素のシーケンスを受け取ります" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "タイムアウト長は対応する最大値を超えています" diff --git a/locale/ko.po b/locale/ko.po index c284971af2..54e57f191f 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -340,6 +340,10 @@ msgstr "사용중인 모든 UART주변 기기" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -388,6 +392,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -589,6 +594,7 @@ msgstr "값을 삭제할 수 없습니다" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -866,7 +872,8 @@ msgstr "Regex에 오류가 있습니다." msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1048,6 +1055,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1071,6 +1082,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1083,6 +1098,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1134,7 +1174,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1228,6 +1268,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "핀이 유효하지 않습니다" @@ -1349,6 +1391,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1402,14 +1474,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1466,6 +1538,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1521,6 +1597,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1593,6 +1673,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1605,11 +1686,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1670,10 +1760,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1756,6 +1870,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1777,6 +1892,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1807,6 +1926,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1971,6 +2098,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2076,7 +2207,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2127,6 +2259,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3508,6 +3641,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3525,6 +3659,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3728,6 +3870,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 2829bd9e89..de9aed9e7d 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -342,6 +342,10 @@ msgstr "Alle UART peripherals zijn in gebruik" msgid "All event channels in use" msgstr "Alle event kanalen zijn in gebruik" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alle sync event kanalen zijn in gebruik" @@ -390,6 +394,7 @@ msgstr "AnalogIn niet ondersteund door gegeven pin" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut functionaliteit niet ondersteund" @@ -591,6 +596,7 @@ msgstr "Kan waardes niet verwijderen" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "get pull kan niet gedurende output mode" @@ -874,7 +880,8 @@ msgstr "Fout in regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1057,6 +1064,10 @@ msgstr "I/O actie op gesloten bestand" msgid "I2C Init Error" msgstr "I2C Init Fout" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut is niet beschikbaar" @@ -1082,6 +1093,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Incorrecte buffer grootte" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "De initialisatie is mislukt vanwege een gebrek aan geheugen" @@ -1094,6 +1109,31 @@ msgstr "Invoer duurt te lang" msgid "Input/output error" msgstr "Input/Output fout" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Onvoldoende authenticatie" @@ -1145,7 +1185,7 @@ msgstr "Ongeldige DAC pin opgegeven" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ongeldige PWM frequentie" @@ -1239,6 +1279,8 @@ msgstr "Ongeldige pin voor rechter kanaal" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Ongeldige pinnen" @@ -1360,6 +1402,36 @@ msgstr "Microfoon opstart vertraging moet in bereik van 0.0 tot 1.0 zijn" msgid "Missing MISO or MOSI Pin" msgstr "Ontbrekende MISO of MOSI Pin" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "%q moet een subklasse zijn." @@ -1413,14 +1485,14 @@ msgstr "Geen MOSI pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Geen RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Geen TX pin" @@ -1477,6 +1549,10 @@ msgstr "Geen timers meer beschikbaar op deze pin." msgid "No network with that ssid" msgstr "Geen netwerk met dat SSID gevonden" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Geen pulldown op pin; 1MOhm aangeraden" @@ -1534,6 +1610,10 @@ msgstr "Oneven pariteit is niet ondersteund" msgid "Only 8 or 16 bit mono with " msgstr "Alleen 8 of 16 bit mono met " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Alleen IPv4 adressen worden ondersteund" @@ -1613,6 +1693,7 @@ msgstr "" "tijdens constructie." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus nog niet ondersteund" @@ -1625,11 +1706,20 @@ msgstr "" msgid "Permission denied" msgstr "Toegang geweigerd" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin heeft geen ADC mogelijkheden" @@ -1699,10 +1789,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull niet gebruikt wanneer de richting output is." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit Fout" @@ -1785,6 +1899,7 @@ msgstr "SD kaart CSD formaat niet ondersteund" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA of SCL hebben een pullup nodig" @@ -1806,6 +1921,10 @@ msgstr "SPI Init Fout" msgid "SPI Re-initialization error" msgstr "SPI Herinitialisatie Fout" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate moet positief zijn" @@ -1836,6 +1955,14 @@ msgstr "Serializer in gebruik" msgid "Server side context cannot have hostname" msgstr "Context aan de serverkant kan geen hostnaam hebben" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Afmeting niet ondersteund" @@ -2010,6 +2137,10 @@ msgstr "UART Init Fout" msgid "UART Re-init error" msgstr "UART Re-init Fout" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART schrijf fout" @@ -2116,7 +2247,8 @@ msgstr "" "apparaat geweigerd of genegeerd werd." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Niet-ondersteunde baudsnelheid" @@ -2167,6 +2299,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "WAARSCHUWING: De bestandsnaam van de code heeft twee extensies\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "WatchDogTimer kan niet worden gedeïnitialiseerd zodra de modus in ingesteld " @@ -3566,6 +3699,7 @@ msgstr "pow() met 3 argumenten vereist integers" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3583,6 +3717,14 @@ msgstr "druk bootknop in bij opstarten.\n" msgid "pressing both buttons at start up.\n" msgstr "druk beide knoppen in bij opstarten.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "wachtrij overloop" @@ -3788,6 +3930,7 @@ msgstr "time.struct_time() accepteert een 9-rij" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "time-outduur is groter dan de ondersteunde maximale waarde" diff --git a/locale/pl.po b/locale/pl.po index 0c03a0ee0a..e9a794cac8 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -344,6 +344,10 @@ msgstr "Wszystkie peryferia UART w użyciu" msgid "All event channels in use" msgstr "Wszystkie kanały zdarzeń w użyciu" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Wszystkie kanały zdarzeń synchronizacji w użyciu" @@ -392,6 +396,7 @@ msgstr "AnalogIn nie jest obsługiwany na danym pinie" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut jest niewspierane" @@ -593,6 +598,7 @@ msgstr "Nie można usunąć" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Nie ma podciągnięcia w trybie wyjścia" @@ -874,7 +880,8 @@ msgstr "Błąd w regex" msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1056,6 +1063,10 @@ msgstr "Operacja I/O na zamkniętym pliku" msgid "I2C Init Error" msgstr "Błąd inicjalizacji I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut niedostępne" @@ -1081,6 +1092,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Niewłaściwa wielkość bufora" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Inicjalizacja nie powiodła się z powodu braku pamięci" @@ -1093,6 +1108,31 @@ msgstr "" msgid "Input/output error" msgstr "Błąd I/O" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Niewystarczające uwierzytelnienie" @@ -1144,7 +1184,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Zła częstotliwość PWM" @@ -1238,6 +1278,8 @@ msgstr "Zła nóżka dla prawego kanału" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Złe nóżki" @@ -1360,6 +1402,36 @@ msgstr "Opóźnienie włączenia mikrofonu musi być w zakresie od 0.0 do 1.0" msgid "Missing MISO or MOSI Pin" msgstr "Brak pinu MISO lub MOSI" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1413,14 +1485,14 @@ msgstr "Brak pinu MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Brak nóżki RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Brak nóżki TX" @@ -1477,6 +1549,10 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1532,6 +1608,10 @@ msgstr "Nieparzysta parzystość nie jest wspierana" msgid "Only 8 or 16 bit mono with " msgstr "Tylko 8 lub 16 bitów mono z " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1604,6 +1684,7 @@ msgid "" msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus nie jest jeszcze obsługiwany" @@ -1616,11 +1697,20 @@ msgstr "" msgid "Permission denied" msgstr "Odmowa dostępu" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Nóżka nie obsługuje ADC" @@ -1681,10 +1771,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Podciągnięcie nieużywane w trybie wyjścia." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1767,6 +1881,7 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA lub SCL wymagają podciągnięcia" @@ -1788,6 +1903,10 @@ msgstr "Błąd inicjowania SPI" msgid "SPI Re-initialization error" msgstr "Błąd ponownej inicjalizacji SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Częstotliwość próbkowania musi być dodatnia" @@ -1818,6 +1937,14 @@ msgstr "Serializator w użyciu" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1982,6 +2109,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Błąd zapisu UART" @@ -2086,7 +2217,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Zła szybkość transmisji" @@ -2137,6 +2269,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "UWAGA: Nazwa pliku ma dwa rozszerzenia\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -3526,6 +3659,7 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3543,6 +3677,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "przepełnienie kolejki" @@ -3747,6 +3889,7 @@ msgstr "time.struct_time() wymaga 9-elementowej sekwencji" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 3e397a0ed4..2b9f9afa2e 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-22 15:30+0000\n" +"PO-Revision-Date: 2021-02-01 17:50+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -68,6 +68,8 @@ msgstr "%%c requer int ou char" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d pinos de endereço, %d pinos rgb e %d blocos indicam uma altura com %d, " +"não %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -350,6 +352,10 @@ msgstr "Todos os periféricos UART estão em uso" msgid "All event channels in use" msgstr "Todos os canais de eventos em uso" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "O estado de todas as máquinas em uso" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Todos os canais dos eventos de sincronização em uso" @@ -398,6 +404,7 @@ msgstr "O AnalogIn não é compatível no pino informado" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Funcionalidade AnalogOut não suportada" @@ -606,6 +613,7 @@ msgstr "Não é possível excluir valores" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Não é possível obter (pull) enquanto estiver no modo saída" @@ -830,7 +838,7 @@ msgstr "O pino de dados 0 deve ser alinhado por bytes" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "O pino de dados 0 deve ser alinhado por bytes." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -890,7 +898,8 @@ msgstr "Erro no regex" msgid "Error: Failure to bind" msgstr "Erro: Falha na vinculação" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1073,6 +1082,10 @@ msgstr "Operação I/O no arquivo fechado" msgid "I2C Init Error" msgstr "Erro de inicialização do I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "Periférico I2C em uso" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "O I2SOut não está disponível" @@ -1098,6 +1111,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "O tamanho do buffer está incorreto" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "O tamanho do programa Init é inválido" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "A inicialização falhou devido à falta de memória" @@ -1110,6 +1127,31 @@ msgstr "A entrada está demorando demais" msgid "Input/output error" msgstr "Erro de entrada/saída" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "A instrução %d salta no pino" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "A instrução %d muda com mais bits do que a quantidade dos pinos" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "A instrução %d desloca mais bits do que a quantidade dos pinos" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "A instrução %d usa um pino extra" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "A instrução %d aguarda a entrada de fora da contagem" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Autenticação insuficiente" @@ -1161,7 +1203,7 @@ msgstr "O pino DAC informado é inválido" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frequência PWM inválida" @@ -1255,6 +1297,8 @@ msgstr "Pino inválido para canal direito" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Pinos inválidos" @@ -1376,6 +1420,36 @@ msgstr "O atraso na inicialização do microfone deve estar entre 0,0 e 1,0" msgid "Missing MISO or MOSI Pin" msgstr "O pino MISO ou MOSI está ausente" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "Faltando first_in_pin. A instrução %d lê pinos(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "Faltando first_in_pin. A instrução %d muda a partir do(s) pino(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "Faltando first_in_pin. A instrução %d aguarda com base no pino" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "Faltando first_out_pin. A instrução %d muda para o(s) pinos(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "Faltando first_out_pin. A instrução %d escreve nos pinos(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "Faltando first_set_pin. A instrução %d define os pinos(s)" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Deve ser uma subclasse %q." @@ -1429,14 +1503,14 @@ msgstr "Nenhum pino MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nenhum pino RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Nenhum pino TX" @@ -1493,6 +1567,10 @@ msgstr "Não há mais temporizadores disponíveis neste pino." msgid "No network with that ssid" msgstr "Não há rede com este ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "Sem saída no programa" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Não há pulldown no pino; É recomendável utilizar um resistor de 1M ohm" @@ -1549,6 +1627,10 @@ msgstr "A paridade ímpar não é compatível" msgid "Only 8 or 16 bit mono with " msgstr "Apenas mono com 8 ou 16 bits com " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "Somente IN/OUT de até 8 suportados" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Somente os endereços IPv4 são suportados" @@ -1629,6 +1711,7 @@ msgstr "" "na construção." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "O ParallelBus ainda não é compatível" @@ -1641,11 +1724,20 @@ msgstr "O periférico está em uso" msgid "Permission denied" msgstr "Permissão negada" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "A contagem dos pinos deve ser com pelo menos 1" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "A contagem dos pinos é muito grande" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "O pino não tem recursos de ADC" @@ -1718,10 +1810,34 @@ msgstr "" "Tentando entrar no deep sleep até o alarme, pressione CTRL-C ou grave o " "arquivo.\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "O programa faz IN sem carregar o ISR" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "O programa faz OUT sem carregar o OSR" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "O programa deve conter pelo menos uma instrução com 16 bits." + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "O tamanho do programa é inválido" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "O programa é muito grande" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "O Pull não foi usado quando a direção for gerada." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "O modo RAISE não foi implementado" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erro DeInit RNG" @@ -1804,6 +1920,7 @@ msgstr "O formato CSD do Cartão SD não é compatível" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA ou SCL precisa de um pull up" @@ -1825,6 +1942,10 @@ msgstr "Houve um erro na inicialização SPI" msgid "SPI Re-initialization error" msgstr "Houve um erro na reinicialização SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "O periférico SPI está em uso" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "A taxa de amostragem deve ser positiva" @@ -1855,6 +1976,15 @@ msgstr "Serializer em uso" msgid "Server side context cannot have hostname" msgstr "O contexto do lado do servidor não pode ter nome de host" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "A definição da contagem dos pinos deve estar entre 1 e 5" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" +"A definição da contagem dos pinos do conjunto lateral deve estar entre 1 e 5" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "O tamanho não é suportado" @@ -2033,6 +2163,10 @@ msgstr "Houve um erro na inicialização do UART" msgid "UART Re-init error" msgstr "Houve um erro na reinicialização do UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "O UART ainda não é suportado" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Houve um erro na gravação UART" @@ -2139,7 +2273,8 @@ msgstr "" "dispositivo tenha sido recusado ou ignorado." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Taxa de transmissão não suportada" @@ -2190,6 +2325,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "AVISO: Seu arquivo de código tem duas extensões\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "O WatchDogTimer não pode ser não-inicializado uma vez que o modo é definido " @@ -3601,6 +3737,7 @@ msgstr "o pow() com 3 argumentos requer números inteiros" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3618,6 +3755,14 @@ msgstr "pressionando o botão de boot na inicialização.\n" msgid "pressing both buttons at start up.\n" msgstr "pressionando ambos os botões durante a inicialização.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "O pull_threshold deve ser entre 1 e 32" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "O pull_threshold deve ser entre 1 e 32" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "estouro de fila" @@ -3815,7 +3960,7 @@ msgstr "Limite deve estar no alcance de 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "o bloco deve ser maior que zero" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -3823,6 +3968,7 @@ msgstr "time.struct_time() leva uma sequência com 9" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "a duração do tempo limite excedeu o valor máximo suportado" diff --git a/locale/sv.po b/locale/sv.po index 3aa0dcc1e7..c4c51fcc00 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -346,6 +346,10 @@ msgstr "Alla UART-kringutrustning används" msgid "All event channels in use" msgstr "Alla händelsekanaler används" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alla händelsekanaler används" @@ -394,6 +398,7 @@ msgstr "AnalogIn stöds inte på angiven pinne" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut-funktionalitet stöds inte" @@ -596,6 +601,7 @@ msgstr "Kan inte radera värden" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Kan inte ange pull i output-läge" @@ -879,7 +885,8 @@ msgstr "Fel i regex" msgid "Error: Failure to bind" msgstr "Fel: Bind misslyckades" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1061,6 +1068,10 @@ msgstr "I/O-operation på stängd fil" msgid "I2C Init Error" msgstr "I2C init-fel" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut är inte tillgängligt" @@ -1086,6 +1097,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Fel buffertstorlek" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Initieringen misslyckades på grund av minnesbrist" @@ -1098,6 +1113,31 @@ msgstr "Indata tar för lång tid" msgid "Input/output error" msgstr "Indata-/utdatafel" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Otillräcklig autentisering" @@ -1149,7 +1189,7 @@ msgstr "Ogiltig DAC-pinne angiven" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ogiltig PWM-frekvens" @@ -1243,6 +1283,8 @@ msgstr "Ogiltig pinne för höger kanal" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Ogiltiga pinnar" @@ -1365,6 +1407,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "MISO- eller MOSI-pinne saknas" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Måste vara en %q-subklass." @@ -1418,14 +1490,14 @@ msgstr "Ingen MOSI-pinne" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Ingen RX-pinne" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Ingen TX-pinne" @@ -1482,6 +1554,10 @@ msgstr "Inga fler timers tillgängliga på denna pinne." msgid "No network with that ssid" msgstr "Inget nätverk med sådant ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Ingen pulldown på pinnen; 1Mohm rekommenderas" @@ -1539,6 +1615,10 @@ msgstr "Udda paritet stöds inte" msgid "Only 8 or 16 bit mono with " msgstr "Endast 8 eller 16 bitars mono med " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Endast IPv4-adresser stöds" @@ -1616,6 +1696,7 @@ msgstr "" "skapandet." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus stöds ännu inte" @@ -1628,11 +1709,20 @@ msgstr "Periferi i bruk" msgid "Permission denied" msgstr "Åtkomst nekad" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pinnen har inte ADC-funktionalitet" @@ -1702,10 +1792,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "Fingerar djup sömn tills larm, Ctrl-C eller filskrivning.\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull används inte när riktningen är output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-fel" @@ -1788,6 +1902,7 @@ msgstr "SD-kort CSD-format stöds inte" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA eller SCL behöver en pullup" @@ -1809,6 +1924,10 @@ msgstr "SPI Init-fel" msgid "SPI Re-initialization error" msgstr "SPI reinitialiseringsfel" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Samplingsfrekvensen måste vara positiv" @@ -1839,6 +1958,14 @@ msgstr "Serializern används redan" msgid "Server side context cannot have hostname" msgstr "Serversidans kontext kan inte ha värdnamn" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Storleken stöds inte" @@ -2013,6 +2140,10 @@ msgstr "UART Init-fel" msgid "UART Re-init error" msgstr "UART reinit-fel" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART skrivfel" @@ -2119,7 +2250,8 @@ msgstr "" "eller ignorerades." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate stöd inte" @@ -2170,6 +2302,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "VARNING: Ditt filnamn för kod har två tillägg\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "WatchDogTimer kan inte avinitialiseras när läget är inställt på RESET" @@ -3566,6 +3699,7 @@ msgstr "pow() med 3 argument kräver heltal" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3583,6 +3717,14 @@ msgstr "trycka på startknappen vid start.\n" msgid "pressing both buttons at start up.\n" msgstr "trycka båda knapparna vid uppstart.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "köstorlek överskreds" @@ -3788,6 +3930,7 @@ msgstr "time.struct_time() kräver en 9-sekvens" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "timeout-längd överskred det maximala värde som stöds" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 07e461bf89..09def43300 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-25 19:32+0000\n" +"PO-Revision-Date: 2021-01-30 02:32+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -69,6 +69,8 @@ msgstr "%%c xūyào zhěngshù huò char" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d de zhǐ yǐn jiǎo , %d rgb yǐn jiǎo hé %d qiē piàn biǎo shì %d de gāo dù, " +"ér bù shì %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -347,6 +349,10 @@ msgstr "Suǒyǒu UART wàiwéi zhèngzài shǐyòng" msgid "All event channels in use" msgstr "Suǒyǒu shǐyòng de shìjiàn píndào" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Suǒyǒu tóngbù shìjiàn píndào shǐyòng" @@ -395,6 +401,7 @@ msgstr "Gěi dìng de yǐn jiǎo bù zhīchí AnalogIn" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Bù zhīchí AnalogOut gōngnéng" @@ -598,6 +605,7 @@ msgstr "Wúfǎ shānchú zhí" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Zài shūchū móshì xià wúfǎ huòqǔ lādòng" @@ -817,7 +825,7 @@ msgstr "Shùjù 0 de yǐn jiǎo bìxū shì zì jié duìqí" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "shù jù 0 yǐn jiǎo bì xū àn zì jié duì qí." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -877,7 +885,8 @@ msgstr "Zhèngzé biǎodá shì cuòwù" msgid "Error: Failure to bind" msgstr "cuò wù: bǎng dìng shī bài" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -1059,6 +1068,10 @@ msgstr "Wénjiàn shàng de I/ O cāozuò" msgid "I2C Init Error" msgstr "I2C chūshǐhuà cuòwù" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut bù kě yòng" @@ -1084,6 +1097,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "yóu yú nèi cún bù zú, chū shǐ huà shī bài" @@ -1096,6 +1113,31 @@ msgstr "Shūrù shíjiānguò zhǎng" msgid "Input/output error" msgstr "Shūrù/shūchū cuòwù" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Rènzhèng bùzú" @@ -1147,7 +1189,7 @@ msgstr "Tí gōng liǎo wúxiào de DAC yǐn jiǎo" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Wúxiào de PWM pínlǜ" @@ -1241,6 +1283,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Wúxiào de yǐn jiǎo" @@ -1362,6 +1406,36 @@ msgstr "Màikèfēng qǐdòng yánchí bìxū zài 0.0 Dào 1.0 De fànwéi nèi msgid "Missing MISO or MOSI Pin" msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Bìxū shì %q zi lèi." @@ -1415,14 +1489,14 @@ msgstr "Méiyǒu MOSI yǐn jiǎo" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Wèi zhǎodào RX yǐn jiǎo" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Wèi zhǎodào TX yǐn jiǎo" @@ -1479,6 +1553,10 @@ msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì." msgid "No network with that ssid" msgstr "Méiyǒu wǎngluò yǔ gāi ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Yǐn jiǎo shàng méiyǒu xiàlā; 1Mohm tuījiàn" @@ -1535,6 +1613,10 @@ msgstr "Bù zhīchí jīshù" msgid "Only 8 or 16 bit mono with " msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Jǐn zhīchí IPv4 dìzhǐ" @@ -1612,6 +1694,7 @@ msgid "" msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "Shàng bù zhīchí ParallelBus" @@ -1624,11 +1707,20 @@ msgstr "shǐ yòng zhōng de wài shè" msgid "Permission denied" msgstr "Quánxiàn bèi jùjué" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin méiyǒu ADC nénglì" @@ -1695,10 +1787,34 @@ msgstr "" "jiǎ zhuāng shēn dù shuì mián , zhí dào bào jǐng , CTRL-C huò wén jiàn xiě " "rù .\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG qǔxiāo chūshǐhuà cuòwù" @@ -1781,6 +1897,7 @@ msgstr "Bù zhīchí SD kǎ CSD géshì" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA huò SCL xūyào lādòng" @@ -1802,6 +1919,10 @@ msgstr "SPI chūshǐhuà cuòwù" msgid "SPI Re-initialization error" msgstr "SPI chóngxīn chūshǐhuà cuòwù" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Cǎiyàng lǜ bìxū wèi zhèng shù" @@ -1832,6 +1953,14 @@ msgstr "Xùliè huà yǐjīng shǐyòngguò" msgid "Server side context cannot have hostname" msgstr "Fúwùqì duān shàngxiàwén bùnéng jùyǒu zhǔjī míng" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "bù zhī chí dà xiǎo" @@ -2005,6 +2134,10 @@ msgstr "UART chūshǐhuà cuòwù" msgid "UART Re-init error" msgstr "UART chóngxīn chūshǐhuà cuòwù" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART xiě cuòwù" @@ -2111,7 +2244,8 @@ msgstr "" "huò hūlüè." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Bù zhīchí de baudrate" @@ -2162,6 +2296,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "Jǐnggào: Nǐ de dàimǎ wénjiàn míng yǒu liǎng gè kuòzhǎn míng\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "Yīdàn jiāng móshì shèzhì wèi RESET, jiù wúfǎ chūshǐhuà WatchDog Timer" @@ -3557,6 +3692,7 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3574,6 +3710,14 @@ msgstr "Zài qǐdòng shí àn qǐdòng ànniǔ.\n" msgid "pressing both buttons at start up.\n" msgstr "zài qǐdòng shí tóngshí àn xià liǎng gè ànniǔ.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "duìliè yìchū" @@ -3771,7 +3915,7 @@ msgstr "yùzhí bìxū zài fànwéi 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "cí tiē bì xū dà yú líng" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -3779,6 +3923,7 @@ msgstr "time.struct_time() xūyào 9 xùliè" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "chāoshí shíjiān chāoguò zuìdà zhīchí zhí"