use family id for s2 and s3 depending on IDF_TARGET
This commit is contained in:
parent
c1236fb4d6
commit
53869d71fd
|
@ -411,9 +411,12 @@ $(BUILD)/circuitpython-firmware.bin: $(BUILD)/firmware.elf | tools/build_memory_
|
||||||
$(BUILD)/firmware.bin: $(BUILD)/circuitpython-firmware.bin | esp-idf-stamp
|
$(BUILD)/firmware.bin: $(BUILD)/circuitpython-firmware.bin | esp-idf-stamp
|
||||||
$(Q)$(PYTHON) ../../tools/join_bins.py $@ $(BOOTLOADER_OFFSET) $(BUILD)/esp-idf/bootloader/bootloader.bin $(PARTITION_TABLE_OFFSET) $(BUILD)/esp-idf/partition_table/partition-table.bin $(FIRMWARE_OFFSET) $(BUILD)/circuitpython-firmware.bin
|
$(Q)$(PYTHON) ../../tools/join_bins.py $@ $(BOOTLOADER_OFFSET) $(BUILD)/esp-idf/bootloader/bootloader.bin $(PARTITION_TABLE_OFFSET) $(BUILD)/esp-idf/partition_table/partition-table.bin $(FIRMWARE_OFFSET) $(BUILD)/circuitpython-firmware.bin
|
||||||
|
|
||||||
|
UF2_FAMILY_ID_esp32s2 = 0xbfdd4eee
|
||||||
|
UF2_FAMILY_ID_esp32s3 = 0xc47e5767
|
||||||
|
|
||||||
$(BUILD)/firmware.uf2: $(BUILD)/circuitpython-firmware.bin
|
$(BUILD)/firmware.uf2: $(BUILD)/circuitpython-firmware.bin
|
||||||
$(STEPECHO) "Create $@"
|
$(STEPECHO) "Create $@"
|
||||||
$(Q)$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f 0xbfdd4eee -b 0x0000 -c -o $@ $^
|
$(Q)$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID_$(IDF_TARGET)) -b 0x0000 -c -o $@ $^
|
||||||
|
|
||||||
flash: $(BUILD)/firmware.bin
|
flash: $(BUILD)/firmware.bin
|
||||||
esptool.py --chip $(IDF_TARGET) -p $(PORT) $(ESPTOOL_FLAGS) write_flash $(FLASH_FLAGS) 0x0000 $^
|
esptool.py --chip $(IDF_TARGET) -p $(PORT) $(ESPTOOL_FLAGS) write_flash $(FLASH_FLAGS) 0x0000 $^
|
||||||
|
|
Loading…
Reference in New Issue