From 4542643025c77a7272bde348b89d5039aea28d23 Mon Sep 17 00:00:00 2001 From: danicampora Date: Wed, 14 Oct 2015 12:32:01 +0200 Subject: [PATCH] docs: Update all WiPy docs to reflect the new API. --- cc3200/mods/modmachine.c | 6 - cc3200/mods/pybuart.c | 4 +- docs/conf.py | 5 + docs/library/index.rst | 12 +- docs/library/machine.ADC.rst | 73 +++++++ ...yb.HeartBeat.rst => machine.HeartBeat.rst} | 17 +- docs/library/machine.I2C.rst | 117 ++++++++++ docs/library/machine.Pin.rst | 206 ++++++++++++++++++ docs/library/machine.RTC.rst | 68 ++++++ docs/library/{pyb.SD.rst => machine.SD.rst} | 30 +-- docs/library/machine.SPI.rst | 85 ++++++++ docs/library/machine.Timer.rst | 193 ++++++++++++++++ docs/library/machine.UART.rst | 170 +++++++++++++++ docs/library/{pyb.WDT.rst => machine.WDT.rst} | 8 +- docs/library/machine.rst | 132 +++++++++++ docs/library/network.rst | 81 ++++--- docs/library/os.rst | 24 +- docs/library/pyb.ADC.rst | 71 ------ docs/library/pyb.I2C.rst | 83 ------- docs/library/pyb.Pin.rst | 148 ------------- docs/library/pyb.RTC.rst | 19 -- docs/library/pyb.SPI.rst | 69 ------ docs/library/pyb.Timer.rst | 158 -------------- docs/library/pyb.UART.rst | 83 ------- docs/library/pyb.rst | 59 +---- docs/library/time.rst | 40 ++++ docs/wipy/general.rst | 36 ++- docs/wipy/quickref.rst | 133 ++++++----- 28 files changed, 1283 insertions(+), 847 deletions(-) create mode 100644 docs/library/machine.ADC.rst rename docs/library/{pyb.HeartBeat.rst => machine.HeartBeat.rst} (76%) create mode 100644 docs/library/machine.I2C.rst create mode 100644 docs/library/machine.Pin.rst create mode 100644 docs/library/machine.RTC.rst rename docs/library/{pyb.SD.rst => machine.SD.rst} (54%) create mode 100644 docs/library/machine.SPI.rst create mode 100644 docs/library/machine.Timer.rst create mode 100644 docs/library/machine.UART.rst rename docs/library/{pyb.WDT.rst => machine.WDT.rst} (80%) create mode 100644 docs/library/machine.rst diff --git a/cc3200/mods/modmachine.c b/cc3200/mods/modmachine.c index 228aff0cf9..ddf80e9ee4 100644 --- a/cc3200/mods/modmachine.c +++ b/cc3200/mods/modmachine.c @@ -40,18 +40,13 @@ #include "rom_map.h" #include "prcm.h" #include "pyexec.h" -#include "ff.h" -#include "diskio.h" -#include "sflash_diskio.h" #include "pybuart.h" #include "pybpin.h" #include "pybrtc.h" -#include "mpsystick.h" #include "simplelink.h" #include "modnetwork.h" #include "modwlan.h" #include "moduos.h" -#include "telnet.h" #include "FreeRTOS.h" #include "portable.h" #include "task.h" @@ -67,7 +62,6 @@ #include "utils.h" #include "gccollect.h" #include "mperror.h" -#include "genhdr/mpversion.h" #ifdef DEBUG diff --git a/cc3200/mods/pybuart.c b/cc3200/mods/pybuart.c index 6e5287a367..351bc63899 100644 --- a/cc3200/mods/pybuart.c +++ b/cc3200/mods/pybuart.c @@ -558,7 +558,7 @@ STATIC mp_obj_t pyb_uart_irq (mp_uint_t n_args, const mp_obj_t *pos_args, mp_map invalid_args: nlr_raise(mp_obj_new_exception_msg(&mp_type_ValueError, mpexception_value_invalid_arguments)); } -STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_uart_callback_obj, 1, pyb_uart_irq); +STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_uart_irq_obj, 1, pyb_uart_irq); STATIC const mp_map_elem_t pyb_uart_locals_dict_table[] = { // instance methods @@ -566,7 +566,7 @@ STATIC const mp_map_elem_t pyb_uart_locals_dict_table[] = { { MP_OBJ_NEW_QSTR(MP_QSTR_deinit), (mp_obj_t)&pyb_uart_deinit_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_any), (mp_obj_t)&pyb_uart_any_obj }, { MP_OBJ_NEW_QSTR(MP_QSTR_sendbreak), (mp_obj_t)&pyb_uart_sendbreak_obj }, - { MP_OBJ_NEW_QSTR(MP_QSTR_irq), (mp_obj_t)&pyb_uart_callback_obj }, + { MP_OBJ_NEW_QSTR(MP_QSTR_irq), (mp_obj_t)&pyb_uart_irq_obj }, /// \method read([nbytes]) { MP_OBJ_NEW_QSTR(MP_QSTR_read), (mp_obj_t)&mp_stream_read_obj }, diff --git a/docs/conf.py b/docs/conf.py index 9f3a252578..aebf79d40f 100755 --- a/docs/conf.py +++ b/docs/conf.py @@ -300,6 +300,11 @@ html_context = { # Append the other ports' specific folders/files to the exclude pattern exclude_patterns.extend([port + '*' for port in ports if port != micropy_port]) +# Exclude pyb module if the port is the WiPy +if micropy_port == 'wipy': + exclude_patterns.append('library/pyb*') +else: # exclude machine + exclude_patterns.append('library/machine*') # Specify a custom master document based on the port name master_doc = micropy_port + '_' + 'index' diff --git a/docs/library/index.rst b/docs/library/index.rst index 9c01d333e5..b53a67ed1c 100644 --- a/docs/library/index.rst +++ b/docs/library/index.rst @@ -74,12 +74,12 @@ it will fallback to loading the built-in ``ujson`` module. Libraries specific to the pyboard --------------------------------- - + The following libraries are specific to the pyboard. - + .. toctree:: :maxdepth: 2 - + pyb.rst network.rst @@ -87,10 +87,8 @@ it will fallback to loading the built-in ``ujson`` module. .. toctree:: :maxdepth: 1 - + ubinascii.rst - uhashlib.rst - uheapq.rst ujson.rst ure.rst usocket.rst @@ -105,7 +103,7 @@ it will fallback to loading the built-in ``ujson`` module. .. toctree:: :maxdepth: 2 - pyb.rst + machine.rst network.rst diff --git a/docs/library/machine.ADC.rst b/docs/library/machine.ADC.rst new file mode 100644 index 0000000000..309d070b1b --- /dev/null +++ b/docs/library/machine.ADC.rst @@ -0,0 +1,73 @@ +.. _machine.ADC: + +class ADC -- analog to digital conversion +========================================= + +Usage:: + + import machine + + adc = machine.ADC() # create an ADC object + apin = adc.channel(pin='GP3') # create an analog pin on GP3 + val = apin() # read an analog value + +Constructors +------------ + +.. class:: machine.ADC(id=0, \*, bits=12) + + Create an ADC object associated with the given pin. + This allows you to then read analog values on that pin. + For more info check the `pinout and alternate functions + table. `_ + + .. warning:: + + ADC pin input range is 0-1.4V (being 1.8V the absolute maximum that it + can withstand). When GP2, GP3, GP4 or GP5 are remapped to the + ADC block, 1.8 V is the maximum. If these pins are used in digital mode, + then the maximum allowed input is 3.6V. + +Methods +------- + +.. method:: adc.channel(id, \*, pin) + + Create an analog pin. If only channel ID is given, the correct pin will + be selected. Alternatively, only the pin can be passed and the correct + channel will be selected. Examples:: + + # all of these are equivalent and enable ADC channel 1 on GP3 + apin = adc.channel(1) + apin = adc.channel(pin='GP3') + apin = adc.channel(id=1, pin='GP3') + +.. method:: adc.init() + + Enable the ADC block. + +.. method:: adc.deinit() + + Disable the ADC block. + +class ADCChannel --- read analog values from internal or external sources +========================================================================= + +ADC channels can be connected to internal points of the MCU or to GPIO pins. +ADC channels are created using the ADC.channel method. + +.. method:: adcchannel() + + Fast method to read the channel value. + +.. method:: adcchannel.value() + + Read the channel value. + +.. method:: adcchannel.init() + + Re-init (and effectively enable) the ADC channel. + +.. method:: adcchannel.deinit() + + Disable the ADC channel. diff --git a/docs/library/pyb.HeartBeat.rst b/docs/library/machine.HeartBeat.rst similarity index 76% rename from docs/library/pyb.HeartBeat.rst rename to docs/library/machine.HeartBeat.rst index a50fc8a23e..033d7311fb 100644 --- a/docs/library/pyb.HeartBeat.rst +++ b/docs/library/machine.HeartBeat.rst @@ -1,4 +1,4 @@ -.. _pyb.HeartBeat: +.. _machine.HeartBeat: class HeartBeat -- heart beat LED ================================= @@ -11,14 +11,14 @@ can be used to control the light intesity of the heart beat LED. Example usage:: - hb = pyb.HeartBeat() + hb = machine.HeartBeat() hb.disable() # disable the heart beat hb.enable() # enable the heart beat Constructors ------------ -.. class:: pyb.HeartBeat() +.. class:: machine.HeartBeat() Create a HeartBeat object. @@ -35,12 +35,13 @@ Methods Example:: - import pyb + from machine import HeartBeat + from machine import Pin # disable the heart beat - pyb.HeartBeat().disable() - # get the GP25 pin object - hbl = pyb.Pin('GP25') + HeartBeat().disable() + # init GP25 as output + led = Pin('GP25', mode=Pin.OUT) # toggle the led - hbl.toggle() + led.toggle() ... diff --git a/docs/library/machine.I2C.rst b/docs/library/machine.I2C.rst new file mode 100644 index 0000000000..aa1caed209 --- /dev/null +++ b/docs/library/machine.I2C.rst @@ -0,0 +1,117 @@ +.. _machine.I2C: + +class I2C -- a two-wire serial protocol +======================================= + +I2C is a two-wire protocol for communicating between devices. At the physical +level it consists of 2 wires: SCL and SDA, the clock and data lines respectively. + +I2C objects are created attached to a specific bus. They can be initialised +when created, or initialised later on. + +.. only:: port_wipy + + Example:: + + from machine import I2C + + i2c = I2C(0) # create on bus 0 + i2c = I2C(0, I2C.MASTER) # create and init as a master + i2c.init(I2C.MASTER, baudrate=20000) # init as a master + i2c.deinit() # turn off the peripheral + +Printing the i2c object gives you information about its configuration. + +.. only:: port_wipy + + A master must specify the recipient's address:: + + i2c.init(I2C.MASTER) + i2c.writeto(0x42, '123') # send 3 bytes to slave with address 0x42 + i2c.writeto(addr=0x42, b'456') # keyword for address + + Master also has other methods:: + + i2c.scan() # scan for slaves on the bus, returning + # a list of valid addresses + i2c.readfrom_mem(0x42, 2, 3) # read 3 bytes from memory of slave 0x42, + # starting at address 2 in the slave + i2c.writeto_mem(0x42, 2, 'abc') # write 'abc' (3 bytes) to memory of slave 0x42 + # starting at address 2 in the slave, timeout after 1 second + +Constructors +------------ + +.. only:: port_wipy + + .. class:: machine.I2C(bus, ...) + + Construct an I2C object on the given bus. `bus` can only be 0. + If the bus is not given, the default one will be selected (0). + +Methods +------- + +.. method:: i2c.deinit() + + Turn off the I2C bus. + +.. only:: port_wipy + + .. method:: i2c.init(mode, \*, baudrate=100000, pins=(SDA, SCL)) + + Initialise the I2C bus with the given parameters: + + - ``mode`` must be ``I2C.MASTER`` + - ``baudrate`` is the SCL clock rate + - ``pins`` is an optional tuple with the pins to assign to the I2C bus. + + .. method:: i2c.readfrom(addr, nbytes) + + Read ``nbytes`` from the slave specified by ``addr``. + Returns a ``bytes`` object with the data read. + + .. method:: i2c.readfrom_into(addr, buf) + + Read into ``buf`` from the slave specified by ``addr``. + Returns the number of bytes read. + + .. method:: i2c.writeto(addr, buf, \*, stop=True) + + Write ``buf`` to the slave specified by ``addr``. Set ``stop`` to ``False`` + if the transfer should be continued. + Returns the number of bytes written. + + .. method:: i2c.readfrom_mem(addr, memaddr, nbytes, \*, addrsize=8) + + Read ``nbytes`` from the slave specified by ``addr`` starting from the memory + address specified by ``memaddr``. + Param ``addrsize`` specifies the address size in bits. + Returns a ``bytes`` object with the data read. + + .. method:: i2c.readfrom_mem_into(addr, memaddr, buf, \*, addrsize=8) + + Read into ``buf`` from the slave specified by ``addr`` starting from the memory + address specified by ``memaddr``. + Param ``addrsize`` specifies the address size in bits. + Returns the number of bytes read. + + .. method:: i2c.writeto_mem(addr, memaddr, buf, \*, addrsize=8) + + Write ``buf`` to the slave specified by ``addr`` starting from the + memory address specified by ``memaddr``. Param ``addrsize`` specifies the + address size in bits. + Set ``stop`` to ``False`` if the transfer should be continued. + Returns the number of bytes written. + +.. method:: i2c.scan() + + Scan all I2C addresses from 0x01 to 0x7f and return a list of those that respond. + Only valid when in master mode. + +Constants +--------- + +.. data:: I2C.MASTER + + for initialising the bus to master mode diff --git a/docs/library/machine.Pin.rst b/docs/library/machine.Pin.rst new file mode 100644 index 0000000000..f7b783c191 --- /dev/null +++ b/docs/library/machine.Pin.rst @@ -0,0 +1,206 @@ +.. _machine.Pin: + +class Pin -- control I/O pins +============================= + +A pin is the basic object to control I/O pins. It has methods to set +the mode of the pin (input, output, etc) and methods to get and set the +digital logic level. For analog control of a pin, see the ADC class. + +Usage Model: + +.. only:: port_wipy + + Board pins are identified by their string id:: + + g = machine.Pin('GP9', mode=machine.Pin.OUT, pull=None, drive=machine.Pin.MED_POWER, alt=-1) + + You can also configure the Pin to generate interrupts. For instance:: + + def pincb(pin): + print(pin.id()) + + pin_int = machine.Pin('GP10', mode=Pin.IN, pull=machine.Pin.PULL_DOWN) + pin_int.irq(mode=machine.Pin.IRQ_RISING, handler=pincb) + # the callback can be triggered manually + pin_int.irq()() + # to disable the callback + pin_int.irq().disable() + + Now every time a falling edge is seen on the gpio pin, the callback will be + executed. Caution: mechanical push buttons have "bounce" and pushing or + releasing a switch will often generate multiple edges. + See: http://www.eng.utah.edu/~cs5780/debouncing.pdf for a detailed + explanation, along with various techniques for debouncing. + + All pin objects go through the pin mapper to come up with one of the + gpio pins. + +Constructors +------------ + +.. class:: machine.Pin(id, ...) + + Create a new Pin object associated with the id. If additional arguments are given, + they are used to initialise the pin. See :meth:`pin.init`. + +Methods +------- + +.. only:: port_wipy + + .. method:: pin.init(mode, pull, \*, drive, alt) + + Initialise the pin: + + - ``mode`` can be one of: + + - ``Pin.IN`` - input pin. + - ``Pin.OUT`` - output pin in push-pull mode. + - ``Pin.OPEN_DRAIN`` - output pin in open-drain mode. + - ``Pin.ALT`` - pin mapped to an alternate function. + - ``Pin.ALT_OPEN_DRAIN`` - pin mapped to an alternate function in open-drain mode. + + - ``pull`` can be one of: + + - ``None`` - no pull up or down resistor. + - ``Pin.PULL_UP`` - pull up resistor enabled. + - ``Pin.PULL_DOWN`` - pull down resitor enabled. + + - ``drive`` can be one of: + + - ``Pin.LOW_POWER`` - 2mA drive capability. + - ``Pin.MED_POWER`` - 4mA drive capability. + - ``Pin.HIGH_POWER`` - 6mA drive capability. + + - ``alt`` is the number of the alternate function. Please refer to the + `pinout and alternate functions table. `_ + for the specific alternate functions that each pin supports. + + Returns: ``None``. + + .. method:: pin.id() + + Get the pin id. + +.. method:: pin.value([value]) + + Get or set the digital logic level of the pin: + + - With no argument, return 0 or 1 depending on the logic level of the pin. + - With ``value`` given, set the logic level of the pin. ``value`` can be + anything that converts to a boolean. If it converts to ``True``, the pin + is set high, otherwise it is set low. + +.. method:: pin.alt_list() + + Returns a list of the alternate functions supported by the pin. List items are + a tuple of the form: ``('ALT_FUN_NAME', ALT_FUN_INDEX)`` + +.. only:: port_wipy + + .. method:: pin([value]) + + Pin objects are callable. The call method provides a (fast) shortcut to set and get the value of the pin. + See **pin.value** for more details. + + .. method:: pin.toggle() + + Toggle the value of the pin. + + .. method:: pin.mode([mode]) + + Get or set the pin mode. + + .. method:: pin.pull([pull]) + + Get or set the pin pull. + + .. method:: pin.drive([drive]) + + Get or set the pin drive strength. + + .. method:: pin.irq(\*, trigger, priority=1, handler=None, wake=None) + + Create a callback to be triggered when the input level at the pin changes. + + - ``trigger`` configures the pin level which can generate an interrupt. Possible values are: + + - ``Pin.IRQ_FALLING`` interrupt on falling edge. + - ``Pin.IRQ_RISING`` interrupt on rising edge. + - ``Pin.IRQ_LOW_LEVEL`` interrupt on low level. + - ``Pin.IRQ_HIGH_LEVEL`` interrupt on high level. + + The values can be *ORed* together, for instance mode=Pin.IRQ_FALLING | Pin.IRQ_RISING + + - ``priority`` level of the interrupt. Can take values in the range 1-7. + Higher values represent higher priorities. + - ``handler`` is an optional function to be called when new characters arrive. + - ``wakes`` selects the power mode in which this interrupt can wake up the + board. Please note: + + - If ``wake_from=machine.Sleep.ACTIVE`` any pin can wake the board. + - If ``wake_from=machine.Sleep.SUSPENDED`` pins ``GP2``, ``GP4``, ``GP10``, + ``GP11``, GP17`` or ``GP24`` can wake the board. Note that only 1 + of this pins can be enabled as a wake source at the same time, so, only + the last enabled pin as a ``machine.Sleep.SUSPENDED`` wake source will have effect. + - If ``wake_from=machine.Sleep.SUSPENDED`` pins ``GP2``, ``GP4``, ``GP10``, + ``GP11``, ``GP17`` and ``GP24`` can wake the board. In this case all of the + 6 pins can be enabled as a ``machine.Sleep.HIBERNATE`` wake source at the same time. + - Values can be ORed to make a pin generate interrupts in more than one power + mode. + + Returns a callback object. + +Attributes +---------- + +.. class:: Pin.board + + Contains all ``Pin`` objects supported by the board. Examples:: + + Pin.board.GP25 + led = Pin(Pin.board.GP25, mode=Pin.OUT) + Pin.board.GP2.alt_list() + + +Constants +--------- + +.. only:: port_wipy + + .. data:: Pin.IN + + .. data:: Pin.OUT + + .. data:: Pin.OPEN_DRAIN + + .. data:: Pin.ALT + + .. data:: Pin.ALT_OPEN_DRAIN + + Selects the pin mode. + + .. data:: Pin.PULL_UP + + .. data:: Pin.PULL_DOWN + + Selectes the wether there's pull up/down resistor. + + .. data:: Pin.LOW_POWER + + .. data:: Pin.MED_POWER + + .. data:: Pin.HIGH_POWER + + Selects the drive strength. + + .. data:: Pin.IRQ_FALLING + + .. data:: Pin.IRQ_RISING + + .. data:: Pin.IRQ_LOW_LEVEL + + .. data:: Pin.IRQ_HIGH_LEVEL + + Selects the IRQ trigger type. diff --git a/docs/library/machine.RTC.rst b/docs/library/machine.RTC.rst new file mode 100644 index 0000000000..fcfc14f500 --- /dev/null +++ b/docs/library/machine.RTC.rst @@ -0,0 +1,68 @@ +.. _machine.RTC: + +class RTC -- real time clock +============================ + +The RTC is and independent clock that keeps track of the date +and time. + +Example usage:: + + rtc = machine.RTC() + rtc.datetime((2014, 5, 1, 4, 13, 0, 0, 0)) + print(rtc.datetime()) + + +Constructors +------------ + +.. class:: machine.RTC(id=0, ...) + + Create an RTC object. See init for parameters of initialization. + +Methods +------- + +.. method:: rtc.init(id, datetime) + + Initialise the RTC. Datetime is a tuple of the form: + + ``(year, month, day[, hour[, minute[, second[, microsecond[, tzinfo]]]]])`` + +.. method:: rtc.now() + + Get get the current datetime tuple. + +.. method:: rtc.deinit() + + Resets the RTC to the time of January 1, 2015 and starts running it again. + +.. method:: rtc.alarm(id, time, /*, repeat=False) + + Set the RTC alarm. Time might be either a milllisecond value to program the alarm to + current time + time_in_ms in the future, or a datetimetuple. If the time passed is in + milliseconds, repeat can be set to ``True`` to make the alarm periodic. + +.. method:: rtc.alarm_left(alarm_id=0) + + Get the number of milliseconds left before the alarm expires. + +.. method:: rtc.cancel(alarm_id=0) + + Cancel a running alarm. + +.. method:: rtc.irq(\*, trigger, handler=None, wake=machine.IDLE) + + Create an irq object triggered by a real time clock alarm. + + - ``trigger`` must be ``RTC.ALARM0`` + - ``handler`` is the function to be called when the callback is triggered. + - ``wake`` specifies the sleep mode from where this interrupt can wake + up the system. + +Constants +--------- + +.. data:: RTC.ALARM0 + + irq trigger source diff --git a/docs/library/pyb.SD.rst b/docs/library/machine.SD.rst similarity index 54% rename from docs/library/pyb.SD.rst rename to docs/library/machine.SD.rst index 9b3d95dac4..19d8d655bd 100644 --- a/docs/library/pyb.SD.rst +++ b/docs/library/machine.SD.rst @@ -1,4 +1,4 @@ -.. _pyb.SD: +.. _machine.SD: class SD -- secure digital memory card ====================================== @@ -13,36 +13,30 @@ more info regarding the pins which can be remapped to be used with a SD card. Example usage:: - # data, clk and cmd pins must be passed along with + from machine import SD + import os + # clk cmd and dat0 pins must be passed along with # their respective alternate functions - sd = pyb.SD(('GP15', 8, 'GP10', 6, 'GP11', 6)) - sd.mount() + sd = machine.SD(pins=('GP10', 'GP11', 'GP15')) + os.mount(sd, '/sd') # do normal file operations Constructors ------------ -.. class:: pyb.SD([pins_tuple]) +.. class:: machine.SD(id,... ) - Create a SD card object. In order to initalize the card, give it a 6-tuple - ``(dat_pin, dat_af, clk_pin, clk_af, cmd_pin, cmd_af)`` with the data, clock - and cmd pins together their respective alternate functions. + Create a SD card object. See init for parameters if initialization. Methods ------- -.. method:: sd.init([pins_tuple]) +.. method:: sd.init(id, pins=('GP10', 'GP11', 'GP15')) Enable the SD card. + In order to initalize the card, give it a 3-tuple ``(clk_pin, cmd_pin, dat0_pin)`` + ID defaults to zero. .. method:: sd.deinit() - Disable the SD card (also unmounts it to avoid file system crashes). - -.. method:: sd.mount() - - Mount the SD card on the file system. Accesible as ``/sd``. - -.. method:: sd.unmount() - - Unmount the SD card from the file system. + Disable the SD card. diff --git a/docs/library/machine.SPI.rst b/docs/library/machine.SPI.rst new file mode 100644 index 0000000000..eddd62dbdc --- /dev/null +++ b/docs/library/machine.SPI.rst @@ -0,0 +1,85 @@ +.. _machine.SPI: + +class SPI -- a master-driven serial protocol +============================================ + +SPI is a serial protocol that is driven by a master. At the physical level +there are 3 lines: SCK, MOSI, MISO. + +.. only:: port_wipy + + See usage model of I2C; SPI is very similar. Main difference is + parameters to init the SPI bus:: + + from machine import SPI + spi = SPI(0, mode=SPI.MASTER, baudrate=1000000, polarity=0, phase=0, firstbit=SPI.MSB) + + Only required parameter is mode, must be SPI.MASTER. Polarity can be 0 or + 1, and is the level the idle clock line sits at. Phase can be 0 or 1 to + sample data on the first or second clock edge respectively. + +Constructors +------------ + +.. only:: port_wipy + + .. class:: machine.SPI(id, ...) + + Construct an SPI object on the given bus. ``id`` can be only 0. + With no additional parameters, the SPI object is created but not + initialised (it has the settings from the last initialisation of + the bus, if any). If extra arguments are given, the bus is initialised. + See ``init`` for parameters of initialisation. + +Methods +------- + +.. method:: spi.init(mode, baudrate=1000000, \*, polarity=0, phase=0, bits=8, firstbit=SPI.MSB, pins=(CLK, MOSI, MISO)) + + Initialise the SPI bus with the given parameters: + + - ``mode`` must be ``SPI.MASTER``. + - ``baudrate`` is the SCK clock rate. + - ``polarity`` can be 0 or 1, and is the level the idle clock line sits at. + - ``phase`` can be 0 or 1 to sample data on the first or second clock edge + respectively. + - ``bits`` is the width of each transfer, accepted values are 8, 16 and 32. + - ``firstbit`` can be ``SPI.MSB`` only. + - ``pins`` is an optional tupple with the pins to assign to the SPI bus. + +.. method:: spi.deinit() + + Turn off the SPI bus. + +.. method:: spi.write(buf) + + Write the data contained in ``buf``. + Returns the number of bytes written. + +.. method:: spi.read(nbytes, *, write=0x00) + + Read the ``nbytes`` while writing the data specified by ``write``. + Return the number of bytes read. + +.. method:: spi.readinto(buf, *, write=0x00) + + Read into the buffer specified by ``buf`` while writing the data specified by + ``write``. + Return the number of bytes read. + +.. method:: spi.write_readinto(write_buf, read_buf) + + Write from ``write_buf`` and read into ``read_buf``. Both buffers must have the + same length. + Returns the number of bytes written + +Constants +--------- + +.. data:: SPI.MASTER + + for initialising the SPI bus to master + +.. data:: SPI.MSB + + set the first bit to be the most significant bit diff --git a/docs/library/machine.Timer.rst b/docs/library/machine.Timer.rst new file mode 100644 index 0000000000..4814da8603 --- /dev/null +++ b/docs/library/machine.Timer.rst @@ -0,0 +1,193 @@ +.. _machine.Timer: + +class Timer -- control internal timers +====================================== + +.. only:: port_wipy + + .. note:: + + Contrary with the rest of the API, timer IDs start at 1, not a t zero. This is because + the ``Timer`` API is still provisional. A new MicroPython wide API will come soon. + + Timers can be used for a great variety of tasks, calling a function periodically, + counting events, and generating a PWM signal are among the most common use cases. + Each timer consists of 2 16-bit channels and this channels can be tied together to + form 1 32-bit timer. The operating mode needs to be configured per timer, but then + the period (or the frequency) can be independently configured on each channel. + By using the callback method, the timer event can call a Python function. + + Example usage to toggle an LED at a fixed frequency:: + + tim = machine.Timer(4) # create a timer object using timer 4 + tim.init(mode=Timer.PERIODIC) # initialize it in periodic mode + tim_ch = tim.channel(Timer.A, freq=2) # configure channel A at a frequency of 2Hz + tim_ch.callback(handler=lambda t:led.toggle()) # toggle a LED on every cycle of the timer + + Example using named function for the callback:: + + tim = Timer(1, mode=Timer.PERIODIC) + tim_a = tim.channel(Timer.A, freq=1000) + + led = Pin('GPIO2', af=0, mode=Pin.OUT) + + def tick(timer): # we will receive the timer object when being called + print(timer.time()) # show current timer's time value (is microseconds) + led.toggle() # toggle the LED + + tim_a.callback(handler=tick) + + Further examples:: + + tim1 = machine.Timer(2, mode=Timer.EVENT_COUNT) # initialize it capture mode + tim2 = machine.Timer(1, mode=Timer.PWM) # initialize it in PWM mode + tim_ch = tim1.channel(Timer.A, freq=1, polarity=Timer.POSITIVE) # start the event counter with a frequency of 1Hz and triggered by positive edges + tim_ch = tim2.channel(Timer.B, freq=10000, duty_cycle=50) # start the PWM on channel B with a 50% duty cycle + tim_ch.time() # get the current time in usec (can also be set) + tim_ch.freq(20) # set the frequency (can also get) + tim_ch.duty_cycle(30) # set the duty cycle to 30% (can also get) + tim_ch.duty_cycle(30, Timer.NEGATIVE) # set the duty cycle to 30% and change the polarity to negative + tim_ch.event_count() # get the number of captured events + tim_ch.event_time() # get the the time of the last captured event + tim_ch.period(2000000) # change the period to 2 seconds + + +.. note:: + + Memory can't be allocated during a callback (an interrupt) and so + exceptions raised within a callback don't give much information. See + :func:`micropython.alloc_emergency_exception_buf` for how to get around this + limitation. + +Constructors +------------ + +.. class:: machine.Timer(id, ...) + + .. only:: port_wipy + + Construct a new timer object of the given id. If additional + arguments are given, then the timer is initialised by ``init(...)``. + ``id`` can be 1 to 4. + + +Methods +------- + +.. only:: port_wipy + + .. method:: timer.init(mode, \*, width=16) + + Initialise the timer. Example:: + + tim.init(Timer.PERIODIC) # periodic 16-bit timer + tim.init(Timer.ONE_SHOT, width=32) # one shot 32-bit timer + + Keyword arguments: + + - ``mode`` can be one of: + + - ``Timer.ONE_SHOT`` - The timer runs once until the configured + period of the channel expires. + - ``Timer.PERIODIC`` - The timer runs periodically at the configured + frequency of the channel. + - ``Timer.EDGE_TIME`` - Meaure the time pin level changes. + - ``Timer.EDGE_COUNT`` - Count the number of pin level changes. + + - ``width`` must be either 16 or 32 (bits). For really low frequencies <= ~1Hz + (or large periods), 32-bit timers should be used. 32-bit mode is only available + for ``ONE_SHOT`` AND ``PERIODIC`` modes. + +.. method:: timer.deinit() + + Deinitialises the timer. Disables all channels and associated IRQs. + Stops the timer, and disables the timer peripheral. + +.. only:: port_wipy + + .. method:: timer.channel(channel, \**, freq, period, polarity=Timer.POSITIVE, duty_cycle=0) + + If only a channel identifier passed, then a previously initialized channel + object is returned (or ``None`` if there is no previous channel). + + Othwerwise, a TimerChannel object is initialized and returned. + + The operating mode is is the one configured to the Timer object that was used to + create the channel. + + - ``channel`` if the width of the timer is 16-bit, then must be either ``TIMER.A``, ``TIMER.B``. + If the width is 32-bit then it **must be** ``TIMER.A | TIMER.B``. + + Keyword only arguments: + + - ``freq`` sets the frequency in Hz. + - ``period`` sets the period in microseconds. + + .. note:: + + Either ``freq`` or ``period`` must be given, never both. + + - ``polarity`` this is applicable for: + + - ``PWM``, defines the polarity of the duty cycle + - ``EDGE_TIME`` and ``EDGE_COUNT``, defines the polarity of the pin level change to detect. + To detect both rising and falling edges, make ``polarity=Timer.POSITIVE | Timer.NEGATIVE``. + - ``duty_cycle`` only applicable to ``PWM``. It's a percentage (0-100) + +class TimerChannel --- setup a channel for a timer +================================================== + +Timer channels are used to generate/capture a signal using a timer. + +TimerChannel objects are created using the Timer.channel() method. + +Methods +------- + +.. only:: port_wipy + + .. method:: timerchannel.irq(\*, trigger, priority=1, handler=None) + + The behavior of this callback is heaviliy dependent on the operating + mode of the timer channel: + + - If mode is ``Timer.PERIODIC`` the callback is executed periodically + with the configured frequency or period. + - If mode is ``Timer.ONE_SHOT`` the callback is executed once when + the configured timer expires. + - If mode is ``Timer.PWM`` the callback is executed when reaching the duty + cycle value. + + The accepted params are: + + - ``priority`` level of the interrupt. Can take values in the range 1-7. + Higher values represent higher priorities. + - ``handler`` is an optional function to be called when the interrupt is triggered. + + Returns a callback object. + +.. only:: port_wipy + + .. method:: timerchannel.freq([value]) + + Get or set the timer channel frequency (in Hz). + + .. method:: timerchannel.period([value]) + + Get or set the timer channel period (in microseconds). + + .. method:: timerchannel.time([value]) + + Get or set the timer channel current **time** value (in microseconds). + + .. method:: timerchannel.event_count() + + Get the number of edge events counted. + + .. method:: timerchannel.event_time() + + Get the time of ocurrance of the last event. + + .. method:: timerchannel.duty_cycle([value]) + + Get or set the duty cycle of the PWM signal (in the range of 0-100). diff --git a/docs/library/machine.UART.rst b/docs/library/machine.UART.rst new file mode 100644 index 0000000000..034492717c --- /dev/null +++ b/docs/library/machine.UART.rst @@ -0,0 +1,170 @@ +.. _machine.UART: + +class UART -- duplex serial communication bus +============================================= + +UART implements the standard UART/USART duplex serial communications protocol. At +the physical level it consists of 2 lines: RX and TX. The unit of communication +is a character (not to be confused with a string character) which can be 8 or 9 +bits wide. + +UART objects can be created and initialised using:: + + from machine import UART + + uart = UART(1, 9600) # init with given baudrate + uart.init(9600, bits=8, parity=None, stop=1) # init with given parameters + +.. only:: port_machineoard + + Bits can be 7, 8 or 9. Parity can be None, 0 (even) or 1 (odd). Stop can be 1 or 2. + + *Note:* with parity=None, only 8 and 9 bits are supported. With parity enabled, + only 7 and 8 bits are supported. + +.. only:: port_wipy + + Bits can be 5, 6, 7, 8. Parity can be ``None``, ``UART.EVEN`` or ``UART.ODD``. Stop can be 1 or 2. + + +A UART object acts like a stream object and reading and writing is done +using the standard stream methods:: + + uart.read(10) # read 10 characters, returns a bytes object + uart.readall() # read all available characters + uart.readline() # read a line + uart.readinto(buf) # read and store into the given buffer + uart.write('abc') # write the 3 characters + +.. only:: port_machineoard + + Individual characters can be read/written using:: + + uart.readchar() # read 1 character and returns it as an integer + uart.writechar(42) # write 1 character + + To check if there is anything to be read, use:: + + uart.any() # returns True if any characters waiting + + *Note:* The stream functions ``read``, ``write``, etc. are new in MicroPython v1.3.4. + Earlier versions use ``uart.send`` and ``uart.recv``. + +.. only:: port_wipy + + To check if there is anything to be read, use:: + + uart.any() # returns the number of characters available for reading + +Constructors +------------ + +.. only:: port_wipy + + .. class:: machine.UART(bus, ...) + + Construct a UART object on the given bus. ``bus`` can be 0 or 1. + If the bus is not given, the default one will be selected (0) or the selection + will be made based on the given pins. + +Methods +------- + +.. only:: port_wipy + + .. method:: uart.init(baudrate=9600, bits=8, parity=None, stop=1, \*, pins=(TX, RX, RTS, CTS)) + + Initialise the UART bus with the given parameters: + + - ``baudrate`` is the clock rate. + - ``bits`` is the number of bits per character, 7, 8 or 9. + - ``parity`` is the parity, ``None``, ``UART.EVEN`` or ``UART.ODD``. + - ``stop`` is the number of stop bits, 1 or 2. + - ``pins`` is a 4 or 2 item list indicating the TX, RX, RTS and CTS pins (in that order). + Any of the pins can be None if one wants the UART to operate with limited functionality. + If the RTS pin is given the the RX pin must be given as well. The same applies to CTS. + When no pins are given, then the default set of TX and RX pins is taken, and hardware + flow control will be disabled. If pins=None, no pin assignment will be made. + +.. method:: uart.deinit() + + Turn off the UART bus. + +.. method:: uart.any() + + Return the number of characters available for reading. + +.. method:: uart.read([nbytes]) + + Read characters. If ``nbytes`` is specified then read at most that many bytes. + + Return value: a bytes object containing the bytes read in. Returns ``b''`` + on timeout. + +.. method:: uart.readall() + + Read as much data as possible. + + Return value: a bytes object. + +.. method:: uart.readinto(buf[, nbytes]) + + Read bytes into the ``buf``. If ``nbytes`` is specified then read at most + that many bytes. Otherwise, read at most ``len(buf)`` bytes. + + Return value: number of bytes read and stored into ``buf``. + +.. method:: uart.readline() + + Read a line, ending in a newline character. + + Return value: the line read. + +.. method:: uart.write(buf) + + Write the buffer of bytes to the bus. + + Return value: number of bytes written. + +.. method:: uart.sendbreak() + + Send a break condition on the bus. This drives the bus low for a duration + of 13 bits. + Return value: ``None``. + +.. only:: port_wipy + + .. method:: uart.irq(trigger, priority=1, handler=None, wake=machine.IDLE) + + Create a callback to be triggered when data is received on the UART. + + - ``trigger`` can only be ``UART.RX_ANY`` + - ``priority`` level of the interrupt. Can take values in the range 1-7. + Higher values represent higher priorities. + - ``handler`` an optional function to be called when new characters arrive. + - ``wake`` can only be ``machine.IDLE``. + + .. note:: + + The handler will be called whenever any of the following two conditions are met: + + - 8 new characters have been received. + - At least 1 new character is waiting in the Rx buffer and the Rx line has been + silent for the duration of 1 complete frame. + + This means that when the handler function is called there will be between 1 to 8 + characters waiting. + + Returns a irq object. + +Constants +--------- + +.. data:: UART.EVEN +.. data:: UART.ODD + + parity types (anlong with ``None``) + +.. data:: UART.RX_ANY + + IRQ trigger sources diff --git a/docs/library/pyb.WDT.rst b/docs/library/machine.WDT.rst similarity index 80% rename from docs/library/pyb.WDT.rst rename to docs/library/machine.WDT.rst index 867026b322..9ce0a96ac3 100644 --- a/docs/library/pyb.WDT.rst +++ b/docs/library/machine.WDT.rst @@ -1,22 +1,22 @@ -.. _pyb.WDT: +.. _machine.WDT: class WDT -- watchdog timer =========================== The WDT is used to restart the system when the application crashes and ends up into a non recoverable state. Once started it cannot be stopped or -reconfigured in any way. After enabling, the application must "kick" the +reconfigured in any way. After enabling, the application must "feed" the watchdog periodically to prevent it from expiring and resetting the system. Example usage:: - wdt = pyb.WDT(timeout=2000) # enable with a timeout of 2s + wdt = machine.WDT(timeout=2000) # enable with a timeout of 2s wdt.feed() Constructors ------------ -.. class:: pyb.WDT(id=0, timeout=5000) +.. class:: machine.WDT(id=0, timeout=5000) Create a WDT object and start it. The timeout must be given in seconds and the minimum value that is accepted is 1 second. Once it is running the timeout diff --git a/docs/library/machine.rst b/docs/library/machine.rst new file mode 100644 index 0000000000..f94454359b --- /dev/null +++ b/docs/library/machine.rst @@ -0,0 +1,132 @@ +:mod:`machine` --- functions related to the board +================================================= + +.. module:: machine + :synopsis: functions related to the board + +The ``machine`` module contains specific functions related to the board. + +Reset related functions +----------------------- + +.. function:: reset() + + Resets the WiPy in a manner similar to pushing the external RESET + button. + +.. function:: reset_cause() + + Get the reset cause. See :ref:`constants ` for the possible return values. + +Interrupt related functions +--------------------------- + +.. function:: disable_irq() + + Disable interrupt requests. + Returns the previous IRQ state: ``False``/``True`` for disabled/enabled IRQs + respectively. This return value can be passed to enable_irq to restore + the IRQ to its original state. + +.. function:: enable_irq(state=True) + + Enable interrupt requests. + If ``state`` is ``True`` (the default value) then IRQs are enabled. + If ``state`` is ``False`` then IRQs are disabled. The most common use of + this function is to pass it the value returned by ``disable_irq`` to + exit a critical section. + +Power related functions +----------------------- + +.. function:: freq() + + Returns a tuple of clock frequencies: ``(sysclk,)`` + These correspond to: + + - sysclk: frequency of the CPU + +.. function:: idle() + + Gates the clock to the CPU, useful to reduce power consumption at any time during + short or long periods. Peripherals continue working and execution resumes as soon + as any interrupt is triggered (including the systick which has a period of 1ms). + Current consumption is reduced to ~12mA (in WLAN STA mode) + +.. function:: sleep() + + Stops the CPU and disables all peripherals except for WLAN. Execution is resumed from + the point where the sleep was requested. Wake sources are ``Pin``, ``RTC`` and ``WLAN``. + Current consumption is reduced to 950uA (in WLAN STA mode). + +.. function:: deepsleep() + + Stops the CPU and all peripherals including WLAN. Execution is resumed from main, just + as with a reset. The reset cause can be checked to know that we are coming from + from ``machine.DEEPSLEEP``. Wake sources are ``Pin`` and ``RTC``. Current consumption + is reduced to ~5uA. + +.. function:: wake_reason() + + Get the wake reason. See :ref:`constants ` for the possible return values. + +Miscellaneous functions +----------------------- + +.. function:: main(filename) + + Set the filename of the main script to run after boot.py is finished. If + this function is not called then the default file main.py will be executed. + + It only makes sense to call this function from within boot.py. + +.. function:: rng() + + Return a 24-bit software generated random number. + +.. function:: unique_id() + + Returns a string of 6 bytes (48 bits), which is the unique ID of the MCU. + This also corresponds to the ``MAC address`` of the WiPy. + +.. _machine_constants: + +Constants +--------- + +.. data:: machine.IDLE +.. data:: machine.SLEEP +.. data:: machine.DEEPSLEEP + + irq wake values + +.. data:: machine.POWER_ON +.. data:: machine.HARD_RESET +.. data:: machine.WDT_RESET +.. data:: machine.DEEPSLEEP_RESET +.. data:: machine.SOFT_RESET + + reset causes + +.. data:: machine.WLAN_WAKE +.. data:: machine.PIN_WAKE +.. data:: machine.RTC_WAKE + + wake reasons + +Classes +------- + +.. toctree:: + :maxdepth: 1 + + machine.ADC.rst + machine.HeartBeat.rst + machine.I2C.rst + machine.Pin.rst + machine.RTC.rst + machine.SD.rst + machine.SPI.rst + machine.Timer.rst + machine.UART.rst + machine.WDT.rst diff --git a/docs/library/network.rst b/docs/library/network.rst index 1044814ffa..cee65491c6 100644 --- a/docs/library/network.rst +++ b/docs/library/network.rst @@ -259,14 +259,15 @@ class WLAN .. only:: port_wipy This class provides a driver for WiFi network processor in the WiPy. Example usage:: - + import network + import time # setup as a station - nic = network.WLAN(mode=WLAN.STA) - nic.connect('your-ssid', security=WLAN.WPA2, key='your-key') - while not nic.isconnected(): - pyb.delay(50) - print(nic.ifconfig()) + wlan = network.WLAN(mode=WLAN.STA) + wlan.connect('your-ssid', auth=(WLAN.WPA2, 'your-key')) + while not wlan.isconnected(): + time.sleep_ms(50) + print(wlan.ifconfig()) # now use socket as usual ... @@ -276,12 +277,12 @@ class WLAN .. class:: WLAN(..) - Create a WLAN object, and optionally configure it. See ``iwconfig`` for params of configuration. + Create a WLAN object, and optionally configure it. See ``init`` for params of configuration. Methods ------- - .. method:: iwconfig(\*, mode, ssid, security, key, channel, antenna) + .. method:: init(mode, \*, ssid, security, key, channel, antenna) Set or get the WiFi network processor configuration. @@ -289,14 +290,13 @@ class WLAN - ``mode`` can be either ``WLAN.STA`` or ``WLAN.AP``. - ``ssid`` is a string with the ssid name. Only needed when mode is ``WLAN.AP``. - - ``security`` can be ``WLAN.OPEN``, ``WLAN.WEP``, ``WLAN.WPA`` or ``WLAN.WPA2``. - Only needed when mode is ``WLAN.AP``. - - ``key`` is a string with the network password. Not needed when mode is ``WLAN.STA`` - or security is ``WLAN.OPEN``. If ``security`` is ``WLAN.WEP`` the key must be a - string representing hexadecimal values (e.g. 'ABC1DE45BF'). + - ``auth`` is a tuple with (sec, key). Security can be ``None``, ``WLAN.WEP``, + ``WLAN.WPA`` or ``WLAN.WPA2``. The key is a string with the network password. + If ``security`` is ``WLAN.WEP`` the key must be a string representing hexadecimal + values (e.g. 'ABC1DE45BF'). Only needed when mode is ``WLAN.AP``. - ``channel`` a number in the range 1-11. Only needed when mode is ``WLAN.AP``. - ``antenna`` selects between the internal and the external antenna. Can be either - ``WLAN.INTERNAL`` or ``WLAN.EXTERNAL``. + ``WLAN.INT_ANT`` or ``WLAN.EXTERNAL``. For example, you can do:: @@ -311,57 +311,53 @@ class WLAN With no arguments given, the current configuration is returned as a namedtuple that looks like this: ``(mode=2, ssid='wipy-wlan', security=2, key='www.wipy.io', channel=5, antenna=0)`` - .. method:: wlan.connect(ssid, \*, security=WLAN.OPEN, key=None, bssid=None, timeout=5000) - + .. method:: wlan.connect(ssid, \*, auth=None, key=None, bssid=None, timeout=5000) + Connect to a wifi access point using the given SSID, and other security parameters. - + - ``key`` is always a string, but if ``security`` is ``WLAN.WEP`` the key must be a string representing hexadecimal values (e.g. 'ABC1DE45BF'). - ``bssid`` is the MAC address of the AP to connect to. Useful when there are several APs with the same ssid. - ``timeout`` is the maximum time in milliseconds to wait for the connection to succeed. - + .. method:: wlan.scan() - - Performs a network scan and returns a list of named tuples with (ssid, bssid, security, channel, rssi). + + Performs a network scan and returns a list of named tuples with (ssid, bssid, sec, channel, rssi). Note that channel is always ``None`` since this info is not provided by the WiPy. - + .. method:: wlan.disconnect() - + Disconnect from the wifi access point. - + .. method:: wlan.isconnected() - + In case of STA mode, returns ``True`` if connected to a wifi access point and has a valid IP address. In AP mode returns ``True`` when a station is connected. Returns ``False`` otherwise. - - .. method:: wlan.ifconfig(['dhcp' or configtuple]) - + + .. method:: wlan.ifconfig(if_id, config=['dhcp' or configtuple]) + With no parameters given eturns a 4-tuple of ``(ip, subnet mask, gateway, DNS server)``. if ``'dhcp'`` is passed as a parameter then the DHCP client is enabled and the IP params are negotiated with the AP. if the 4-tuple config is given then a static IP is configured. For example:: - - nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8')) - - .. method:: wlan.mac() - - Returns a 6-byte long bytes object with the MAC address. - .. method:: wlan.connections() - - Returns a list of the devices currently connected. Each item in the list is a - tuple of ``(ssid, mac)``. + nic.ifconfig(config=('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8')) - .. method:: wlan.callback(wake_from) + .. method:: wlan.mac([mac_addr]) - Create a callback to be triggered when a WLAN event occurs during ``pyb.Sleep.SUSPENDED`` + Get or set a 6-byte long bytes object with the MAC address. + + .. method:: wlan.irq(\*, handler, wake) + + Create a callback to be triggered when a WLAN event occurs during ``machine.SLEEP`` mode. Events are triggered by socket activity or by WLAN connection/disconnection. - - ``wake_from`` must be ``pyb.Sleep.SUSPENDED``. + - ``handler`` is the function that gets called when the irq is triggered. + - ``wake`` must be ``machine.SLEEP``. Returns a callback object. @@ -376,14 +372,13 @@ class WLAN WiFi access point mode - .. data:: WLAN.OPEN .. data:: WLAN.WEP .. data:: WLAN.WPA .. data:: WLAN.WPA2 selects the network security - .. data:: WLAN.INTERNAL - .. data:: WLAN.EXTERNAL + .. data:: WLAN.INT_ANT + .. data:: WLAN.EXT_ANT selects the antenna type diff --git a/docs/library/os.rst b/docs/library/os.rst index e32a409f53..302d71fd5d 100644 --- a/docs/library/os.rst +++ b/docs/library/os.rst @@ -71,9 +71,27 @@ Functions .. only:: port_wipy - .. function:: mkfs(drive) - - Formats the specified drive, must be either ``/flash`` or ``/sd``. + .. function:: mount(block_device, mount_point, \*, readonly=False) + + Mounts a block device (like an ``SD`` object) in the specified mount + point. Example:: + + os.mount(sd, '/sd') + + .. function:: unmount(path) + + Unmounts a prevoulsy mounted block device from the given path. + + .. function:: mkfs(block_device or path) + + Formats the specified path, must be either ``/flash`` or ``/sd``. + A block device can also be passed like an ``SD`` object before + being mounted. + + .. function:: dupterm(stream_object) + + Duplicate the terminal (the REPL) on the passed stream-like object. + The given object must at least implement the ``.read()`` and ``.write()`` methods. Constants --------- diff --git a/docs/library/pyb.ADC.rst b/docs/library/pyb.ADC.rst index 8623dfc438..af4dc3d779 100644 --- a/docs/library/pyb.ADC.rst +++ b/docs/library/pyb.ADC.rst @@ -18,16 +18,6 @@ class ADC -- analog to digital conversion val = adc.read_core_vbat() # read MCU VBAT val = adc.read_core_vref() # read MCU VREF -.. only:: port_wipy - - Usage:: - - import pyb - - adc = pyb.ADC() # create an ADC object - apin = adc.channel(pin='GP3') # create an analog pin on GP3 - val = apin() # read an analog value - Constructors ------------ @@ -39,22 +29,6 @@ Constructors Create an ADC object associated with the given pin. This allows you to then read analog values on that pin. -.. only:: port_wipy - - .. class:: pyb.ADC(id=0, \*, bits=12) - - Create an ADC object associated with the given pin. - This allows you to then read analog values on that pin. - For more info check the `pinout and alternate functions - table. `_ - - .. warning:: - - ADC pin input range is 0-1.4V (being 1.8V the absolute maximum that it - can withstand). When GP2, GP3, GP4 or GP5 are remapped to the - ADC block, 1.8 V is the maximum. If these pins are used in digital mode, - then the maximum allowed input is 3.6V. - Methods ------- @@ -100,48 +74,3 @@ Methods This function does not allocate any memory. -.. only:: port_wipy - - .. method:: adc.channel(id, *, pin) - - Create an analog pin. If only channel ID is given, the correct pin will be selected. Alternatively, - only the pin can be passed and the correct channel will be selected. Examples:: - - # all of these are equivalent and enable ADC channel 1 on GP3 - apin = adc.channel(1) - apin = adc.channel(pin='GP3') - apin = adc.channel(id=1, pin='GP3') - - .. method:: adc.init() - - Enable the ADC block. - - .. method:: adc.deinit() - - Disable the ADC block. - -.. only:: port_wipy - - class ADCChannel --- read analog values from internal or external sources - ========================================================================= - - .. only:: port_wipy - - ADC channels can be connected to internal points of the MCU or to GPIO pins. - ADC channels are created using the ADC.channel method. - - .. method:: adcchannel() - - Fast method to read the channel value. - - .. method:: adcchannel.value() - - Read the channel value. - - .. method:: adcchannel.init() - - Re-init (and effectively enable) the ADC channel. - - .. method:: adcchannel.deinit() - - Disable the ADC channel. diff --git a/docs/library/pyb.I2C.rst b/docs/library/pyb.I2C.rst index eb60f22ffa..0d00b1f753 100644 --- a/docs/library/pyb.I2C.rst +++ b/docs/library/pyb.I2C.rst @@ -21,17 +21,6 @@ when created, or initialised later on. i2c.init(I2C.SLAVE, addr=0x42) # init as a slave with given address i2c.deinit() # turn off the peripheral -.. only:: port_wipy - - Example:: - - from pyb import I2C - - i2c = I2C(0) # create on bus 0 - i2c = I2C(0, I2C.MASTER) # create and init as a master - i2c.init(I2C.MASTER, baudrate=20000) # init as a master - i2c.deinit() # turn off the peripheral - Printing the i2c object gives you information about its configuration. .. only:: port_pyboard @@ -67,23 +56,6 @@ Printing the i2c object gives you information about its configuration. i2c.mem_write('abc', 0x42, 2, timeout=1000) # write 'abc' (3 bytes) to memory of slave 0x42 # starting at address 2 in the slave, timeout after 1 second -.. only:: port_wipy - - A master must specify the recipient's address:: - - i2c.init(I2C.MASTER) - i2c.writeto(0x42, '123') # send 3 bytes to slave with address 0x42 - i2c.writeto(addr=0x42, b'456') # keyword for address - - Master also has other methods:: - - i2c.scan() # scan for slaves on the bus, returning - # a list of valid addresses - i2c.readfrom_mem(0x42, 2, 3) # read 3 bytes from memory of slave 0x42, - # starting at address 2 in the slave - i2c.writeto_mem(0x42, 2, 'abc') # write 'abc' (3 bytes) to memory of slave 0x42 - # starting at address 2 in the slave, timeout after 1 second - Constructors ------------ @@ -102,13 +74,6 @@ Constructors - ``I2C(1)`` is on the X position: ``(SCL, SDA) = (X9, X10) = (PB6, PB7)`` - ``I2C(2)`` is on the Y position: ``(SCL, SDA) = (Y9, Y10) = (PB10, PB11)`` -.. only:: port_wipy - - .. class:: pyb.I2C(bus, ...) - - Construct an I2C object on the given bus. `bus` can only be 0. - If the bus is not given, the default one will be selected (0). - Methods ------- @@ -179,54 +144,6 @@ Methods Return value: ``None``. -.. only:: port_wipy - - .. method:: i2c.init(mode, \*, baudrate=100000, pins=(SDA, SCL)) - - Initialise the I2C bus with the given parameters: - - - ``mode`` must be ``I2C.MASTER`` - - ``baudrate`` is the SCL clock rate - - ``pins`` is an optional tuple with the pins to assign to the I2C bus. - - .. method:: i2c.readfrom(addr, nbytes) - - Read ``nbytes`` from the slave specified by ``addr``. - Returns a ``bytes`` object with the data read. - - .. method:: i2c.readfrom_into(addr, buf) - - Read into ``buf`` from the slave specified by ``addr``. - Returns the number of bytes read. - - .. method:: i2c.writeto(addr, buf, \*, stop=True) - - Write ``buf`` to the slave specified by ``addr``. Set ``stop`` to ``False`` - if the transfer should be continued. - Returns the number of bytes written. - - .. method:: i2c.readfrom_mem(addr, memaddr, nbytes, \*, addrsize=8) - - Read ``nbytes`` from the slave specified by ``addr`` starting from the memory - address specified by ``memaddr``. - Param ``addrsize`` specifies the address size in bits. - Returns a ``bytes`` object with the data read. - - .. method:: i2c.readfrom_mem_into(addr, memaddr, buf, \*, addrsize=8) - - Read into ``buf`` from the slave specified by ``addr`` starting from the memory - address specified by ``memaddr``. - Param ``addrsize`` specifies the address size in bits. - Returns the number of bytes read. - - .. method:: i2c.writeto_mem(addr, memaddr, buf, \*, addrsize=8) - - Write ``buf`` to the slave specified by ``addr`` starting from the - memory address specified by ``memaddr``. Param ``addrsize`` specifies the - address size in bits. - Set ``stop`` to ``False`` if the transfer should be continued. - Returns the number of bytes written. - .. method:: i2c.scan() Scan all I2C addresses from 0x01 to 0x7f and return a list of those that respond. diff --git a/docs/library/pyb.Pin.rst b/docs/library/pyb.Pin.rst index 01bd54fcee..30440f5025 100644 --- a/docs/library/pyb.Pin.rst +++ b/docs/library/pyb.Pin.rst @@ -63,24 +63,6 @@ Usage Model: that pin has an effective 40k Ohm resistor pulling it to 3V3 or GND respectively (except pin Y5 which has 11k Ohm resistors). -.. only:: port_wipy - - Board pins are identified by their string id:: - - g = pyb.Pin('GP9', mode=pyb.Pin.OUT, pull=None, drive=pyb.Pin.MED_POWER, alt=-1) - - You can also configure the Pin to generate interrupts. For instance:: - - def pincb(pin): - print(pin.id()) - - pin_int = pyb.Pin('GP10', mode=Pin.IN, pull=pyb.Pin.PULL_DOWN) - pin_int.irq(mode=pyb.Pin.IRQ_RISING, handler=pincb) - # the callback can be triggered manually - pin_int.irq()() - # to disable the callback - pin_int.irq().disable() - Now every time a falling edge is seen on the gpio pin, the callback will be executed. Caution: mechanical push buttons have "bounce" and pushing or releasing a switch will often generate multiple edges. @@ -149,42 +131,6 @@ Methods Returns: ``None``. -.. only:: port_wipy - - .. method:: pin.init(mode, pull, \*, drive, alt) - - Initialise the pin: - - - ``mode`` can be one of: - - - ``Pin.IN`` - input pin. - - ``Pin.OUT`` - output pin in push-pull mode. - - ``Pin.OPEN_DRAIN`` - output pin in open-drain mode. - - ``Pin.ALT`` - pin mapped to an alternate function. - - ``Pin.ALT_OPEN_DRAIN`` - pin mapped to an alternate function in open-drain mode. - - - ``pull`` can be one of: - - - ``None`` - no pull up or down resistor. - - ``Pin.PULL_UP`` - pull up resistor enabled. - - ``Pin.PULL_DOWN`` - pull down resitor enabled. - - - ``drive`` can be one of: - - - ``Pin.LOW_POWER`` - 2mA drive capability. - - ``Pin.MED_POWER`` - 4mA drive capability. - - ``Pin.HIGH_POWER`` - 6mA drive capability. - - - ``alt`` is the number of the alternate function. Please refer to the - `pinout and alternate functions table. `_ - for the specific alternate functions that each pin supports. - - Returns: ``None``. - - .. method:: pin.id() - - Get the pin id. - .. method:: pin.value([value]) Get or set the digital logic level of the pin: @@ -238,62 +184,6 @@ Methods will match one of the allowed constants for the pull argument to the init function. -.. only:: port_wipy - - .. method:: pin([value]) - - Pin objects are callable. The call method provides a (fast) shortcut to set and get the value of the pin. - See **pin.value** for more details. - - .. method:: pin.toggle() - - Toggle the value of the pin. - - .. method:: pin.mode([mode]) - - Get or set the pin mode. - - .. method:: pin.pull([pull]) - - Get or set the pin pull. - - .. method:: pin.drive([drive]) - - Get or set the pin drive strength. - - .. method:: pin.irq(\*, trigger, priority=1, handler=None, wake=None) - - Create a callback to be triggered when the input level at the pin changes. - - - ``trigger`` configures the pin level which can generate an interrupt. Possible values are: - - - ``Pin.IRQ_FALLING`` interrupt on falling edge. - - ``Pin.IRQ_RISING`` interrupt on rising edge. - - ``Pin.IRQ_LOW_LEVEL`` interrupt on low level. - - ``Pin.IRQ_HIGH_LEVEL`` interrupt on high level. - - The values can be *ORed* together, for instance mode=Pin.IRQ_FALLING | Pin.IRQ_RISING - - - ``priority`` level of the interrupt. Can take values in the range 1-7. - Higher values represent higher priorities. - - ``handler`` is an optional function to be called when new characters arrive. - - ``wakes`` selects the power mode in which this interrupt can wake up the - board. Please note: - - - If ``wake_from=pyb.Sleep.ACTIVE`` any pin can wake the board. - - If ``wake_from=pyb.Sleep.SUSPENDED`` pins ``GP2``, ``GP4``, ``GP10``, - ``GP11``, GP17`` or ``GP24`` can wake the board. Note that only 1 - of this pins can be enabled as a wake source at the same time, so, only - the last enabled pin as a ``pyb.Sleep.SUSPENDED`` wake source will have effect. - - If ``wake_from=pyb.Sleep.SUSPENDED`` pins ``GP2``, ``GP4``, ``GP10``, - ``GP11``, ``GP17`` and ``GP24`` can wake the board. In this case all of the - 6 pins can be enabled as a ``pyb.Sleep.HIBERNATE`` wake source at the same time. - - Values can be ORed to make a pin generate interrupts in more than one power - mode. - - Returns a callback object. - - Constants --------- @@ -335,44 +225,6 @@ Constants enable the pull-up resistor on the pin -.. only:: port_wipy - - .. data:: Pin.IN - - .. data:: Pin.OUT - - .. data:: Pin.OPEN_DRAIN - - .. data:: Pin.ALT - - .. data:: Pin.ALT_OPEN_DRAIN - - Selects the pin mode. - - .. data:: Pin.PULL_UP - - .. data:: Pin.PULL_DOWN - - Selectes the wether there's pull up/down resistor. - - .. data:: Pin.LOW_POWER - - .. data:: Pin.MED_POWER - - .. data:: Pin.HIGH_POWER - - Selects the drive strength. - - .. data:: Pin.IRQ_FALLING - - .. data:: Pin.IRQ_RISING - - .. data:: Pin.IRQ_LOW_LEVEL - - .. data:: Pin.IRQ_HIGH_LEVEL - - Selects the IRQ trigger type. - .. only:: port_pyboard class PinAF -- Pin Alternate Functions diff --git a/docs/library/pyb.RTC.rst b/docs/library/pyb.RTC.rst index 4b5f4e6b40..51b17deccf 100644 --- a/docs/library/pyb.RTC.rst +++ b/docs/library/pyb.RTC.rst @@ -41,14 +41,6 @@ Methods ``weekday`` is 1-7 for Monday through Sunday. ``subseconds`` counts down from 255 to 0 - - .. only:: port_wipy - - The 8-tuple has the following format: - - ``(year, month, day, weekday, hours, minutes, seconds, milliseconds)`` - - ``weekday`` is 0-6 for Monday through Sunday. .. only:: port_pyboard @@ -88,14 +80,3 @@ Methods usable calibration range is: (-511 * 0.954) ~= -487.5 ppm up to (512 * 0.954) ~= 488.5 ppm -.. only:: port_wipy - - .. method:: rtc.callback(\*, value, handler=None, wake_from=pyb.Sleep.ACTIVE) - - Create a callback object triggered by a real time clock alarm. - - - ``value`` is the alarm timeout in milliseconds. This parameter is required. - - ``handler`` is the function to be called when the callback is triggered. - - ``wake_from`` specifies the power mode from where this interrupt can wake - up the system. - diff --git a/docs/library/pyb.SPI.rst b/docs/library/pyb.SPI.rst index 3c540b2799..73783c7d57 100644 --- a/docs/library/pyb.SPI.rst +++ b/docs/library/pyb.SPI.rst @@ -26,18 +26,6 @@ there are 3 lines: SCK, MOSI, MISO. spi.send_recv(b'1234', buf) # send 4 bytes and receive 4 into buf spi.send_recv(buf, buf) # send/recv 4 bytes from/to buf -.. only:: port_wipy - - See usage model of I2C; SPI is very similar. Main difference is - parameters to init the SPI bus:: - - from pyb import SPI - spi = SPI(1, SPI.MASTER, baudrate=1000000, polarity=0, phase=0, firstbit=SPI.MSB) - - Only required parameter is mode, must be SPI.MASTER. Polarity can be 0 or - 1, and is the level the idle clock line sits at. Phase can be 0 or 1 to - sample data on the first or second clock edge respectively. - Constructors ------------ @@ -59,16 +47,6 @@ Constructors At the moment, the NSS pin is not used by the SPI driver and is free for other use. -.. only:: port_wipy - - .. class:: pyb.SPI(bus, ...) - - Construct an SPI object on the given bus. ``bus`` can be only 1. - With no additional parameters, the SPI object is created but not - initialised (it has the settings from the last initialisation of - the bus, if any). If extra arguments are given, the bus is initialised. - See ``init`` for parameters of initialisation. - Methods ------- @@ -102,43 +80,6 @@ Methods Printing the SPI object will show you the computed baudrate and the chosen prescaler. -.. only:: port_wipy - - .. method:: spi.init(mode, baudrate=1000000, \*, polarity=0, phase=0, bits=8, firstbit=SPI.MSB, pins=(CLK, MOSI, MISO)) - - Initialise the SPI bus with the given parameters: - - - ``mode`` must be ``SPI.MASTER``. - - ``baudrate`` is the SCK clock rate. - - ``polarity`` can be 0 or 1, and is the level the idle clock line sits at. - - ``phase`` can be 0 or 1 to sample data on the first or second clock edge - respectively. - - ``bits`` is the width of each transfer, accepted values are 8, 16 and 32. - - ``firstbit`` can be ``SPI.MSB`` only. - - ``pins`` is an optional tupple with the pins to assign to the SPI bus. - - .. method:: spi.write(buf) - - Write the data contained in ``buf``. - Returns the number of bytes written. - - .. method:: spi.read(nbytes, *, write=0x00) - - Read the ``nbytes`` while writing the data specified by ``write``. - Return the number of bytes read. - - .. method:: spi.readinto(buf, *, write=0x00) - - Read into the buffer specified by ``buf`` while writing the data specified by - ``write``. - Return the number of bytes read. - - .. method:: spi.write_readinto(write_buf, read_buf) - - Write from ``write_buf`` and read into ``read_buf``. Both buffers must have the - same length. - Returns the number of bytes written - .. only:: port_pyboard .. method:: spi.recv(recv, \*, timeout=5000) @@ -187,13 +128,3 @@ Constants .. data:: SPI.MSB set the first bit to be the least or most significant bit - -.. only:: port_wipy - - .. data:: SPI.MASTER - - for initialising the SPI bus to master - - .. data:: SPI.MSB - - set the first bit to be the most significant bit diff --git a/docs/library/pyb.Timer.rst b/docs/library/pyb.Timer.rst index ca1d4702e5..af28fb6787 100644 --- a/docs/library/pyb.Timer.rst +++ b/docs/library/pyb.Timer.rst @@ -41,50 +41,6 @@ class Timer -- control internal timers the servo driver, and Timer 6 is used for timed ADC/DAC reading/writing. It is recommended to use the other timers in your programs. -.. only:: port_wipy - - Timers can be used for a great variety of tasks, calling a function periodically, - counting events, and generating a PWM signal are among the most common use cases. - Each timer consists of 2 16-bit channels and this channels can be tied together to - form 1 32-bit timer. The operating mode needs to be configured per timer, but then - the period (or the frequency) can be independently configured on each channel. - By using the callback method, the timer event can call a Python function. - - Example usage to toggle an LED at a fixed frequency:: - - tim = pyb.Timer(4) # create a timer object using timer 4 - tim.init(mode=Timer.PERIODIC) # initialize it in periodic mode - tim_ch = tim.channel(Timer.A, freq=2) # configure channel A at a frequency of 2Hz - tim_ch.callback(handler=lambda t:led.toggle()) # toggle a LED on every cycle of the timer - - Example using named function for the callback:: - - tim = Timer(1, mode=Timer.PERIODIC) - tim_a = tim.channel(Timer.A, freq=1000) - - led = Pin('GPIO2', af=0, mode=Pin.OUT) - - def tick(timer): # we will receive the timer object when being called - print(timer.time()) # show current timer's time value (is microseconds) - led.toggle() # toggle the LED - - tim_a.callback(handler=tick) - - Further examples:: - - tim1 = pyb.Timer(2, mode=Timer.EVENT_COUNT) # initialize it capture mode - tim2 = pyb.Timer(1, mode=Timer.PWM) # initialize it in PWM mode - tim_ch = tim1.channel(Timer.A, freq=1, polarity=Timer.POSITIVE) # start the event counter with a frequency of 1Hz and triggered by positive edges - tim_ch = tim2.channel(Timer.B, freq=10000, duty_cycle=50) # start the PWM on channel B with a 50% duty cycle - tim_ch.time() # get the current time in usec (can also be set) - tim_ch.freq(20) # set the frequency (can also get) - tim_ch.duty_cycle(30) # set the duty cycle to 30% (can also get) - tim_ch.duty_cycle(30, Timer.NEGATIVE) # set the duty cycle to 30% and change the polarity to negative - tim_ch.event_count() # get the number of captured events - tim_ch.event_time() # get the the time of the last captured event - tim_ch.period(2000000) # change the period to 2 seconds - - *Note:* Memory can't be allocated during a callback (an interrupt) and so exceptions raised within a callback don't give much information. See :func:`micropython.alloc_emergency_exception_buf` for how to get around this @@ -102,13 +58,6 @@ Constructors arguments are given, then the timer is initialised by ``init(...)``. ``id`` can be 1 to 14, excluding 3. - .. only:: port_wipy - - Construct a new timer object of the given id. If additional - arguments are given, then the timer is initialised by ``init(...)``. - ``id`` can be 1 to 4. - - Methods ------- @@ -161,30 +110,6 @@ Methods You must either specify freq or both of period and prescaler. -.. only:: port_wipy - - .. method:: timer.init(mode, \*, width=16) - - Initialise the timer. Example:: - - tim.init(Timer.PERIODIC) # periodic 16-bit timer - tim.init(Timer.ONE_SHOT, width=32) # one shot 32-bit timer - - Keyword arguments: - - - ``mode`` can be one of: - - - ``Timer.ONE_SHOT`` - The timer runs once until the configured - period of the channel expires. - - ``Timer.PERIODIC`` - The timer runs periodically at the configured - frequency of the channel. - - ``Timer.EDGE_TIME`` - Meaure the time pin level changes. - - ``Timer.EDGE_COUNT`` - Count the number of pin level changes. - - - ``width`` must be either 16 or 32 (bits). For really low frequencies <= ~1Hz - (or large periods), 32-bit timers should be used. 32-bit mode is only available - for ``ONE_SHOT`` AND ``PERIODIC`` modes. - .. method:: timer.deinit() Deinitialises the timer. @@ -280,37 +205,6 @@ Methods ch2 = timer.channel(2, pyb.Timer.PWM, pin=pyb.Pin.board.X2, pulse_width=8000) ch3 = timer.channel(3, pyb.Timer.PWM, pin=pyb.Pin.board.X3, pulse_width=16000) -.. only:: port_wipy - - .. method:: timer.channel(channel, \**, freq, period, polarity=Timer.POSITIVE, duty_cycle=0) - - If only a channel identifier passed, then a previously initialized channel - object is returned (or ``None`` if there is no previous channel). - - Othwerwise, a TimerChannel object is initialized and returned. - - The operating mode is is the one configured to the Timer object that was used to - create the channel. - - - ``channel`` if the width of the timer is 16-bit, then must be either ``TIMER.A``, ``TIMER.B``. - If the width is 32-bit then it **must be** ``TIMER.A | TIMER.B``. - - Keyword only arguments: - - - ``freq`` sets the frequency in Hz. - - ``period`` sets the period in microseconds. - - .. note:: - - Either ``freq`` or ``period`` must be given, never both. - - - ``polarity`` this is applicable for: - - - ``PWM``, defines the polarity of the duty cycle - - ``EDGE_TIME`` and ``EDGE_COUNT``, defines the polarity of the pin level change to detect. - To detect both rising and falling edges, make ``polarity=Timer.POSITIVE | Timer.NEGATIVE``. - - ``duty_cycle`` only applicable to ``PWM``. It's a percentage (0-100) - .. only:: port_pyboard .. method:: timer.counter([value]) @@ -355,32 +249,6 @@ Methods ``fun`` is passed 1 argument, the timer object. If ``fun`` is ``None`` then the callback will be disabled. -.. only:: port_wipy - - .. method:: timerchannel.callback(\**, value, priority=1, handler=None) - - The behavior of this callback is heaviliy dependent on the operating - mode of the timer channel: - - - If mode is ``Timer.PERIODIC`` the callback is executed periodically - with the configured frequency or period. - - If mode is ``Timer.ONE_SHOT`` the callback is executed once when - the configured timer expires. - - If mode is ``Timer.EDGE_COUNT`` the callback is executed when reaching - the configured number of events (see ``value`` param below). - - If mode is ``Timer.PWM`` the callback is executed when reaching the duty - cycle value. - - The accepted params are: - - - ``priority`` level of the interrupt. Can take values in the range 1-7. - Higher values represent higher priorities. - - ``handler`` is an optional function to be called when the interrupt is triggered. - - ``value`` is **only valid** when in ``Timer.EDGE_COUNT`` mode and is used to set - the number of edge events that will trigger the interrupt. - - Returns a callback object. - .. only:: port_pyboard .. method:: timerchannel.capture([value]) @@ -411,29 +279,3 @@ Methods for which the pulse is active. The value can be an integer or floating-point number for more accuracy. For example, a value of 25 gives a duty cycle of 25%. - -.. only:: port_wipy - - .. method:: timerchannel.freq([value]) - - Get or set the timer channel frequency (in Hz). - - .. method:: timerchannel.period([value]) - - Get or set the timer channel period (in microseconds). - - .. method:: timerchannel.time([value]) - - Get or set the timer channel current **time** value (in microseconds). - - .. method:: timerchannel.event_count() - - Get the number of edge events counted. - - .. method:: timerchannel.event_time() - - Get the time of ocurrance of the last event. - - .. method:: timerchannel.duty_cycle([value]) - - Get or set the duty cycle of the PWM signal (in the range of 0-100). diff --git a/docs/library/pyb.UART.rst b/docs/library/pyb.UART.rst index ca1912ef3b..16b1a5b16c 100644 --- a/docs/library/pyb.UART.rst +++ b/docs/library/pyb.UART.rst @@ -22,11 +22,6 @@ UART objects can be created and initialised using:: *Note:* with parity=None, only 8 and 9 bits are supported. With parity enabled, only 7 and 8 bits are supported. -.. only:: port_wipy - - Bits can be 5, 6, 7, 8. Parity can be ``None``, ``UART.EVEN`` or ``UART.ODD``. Stop can be 1 or 2. - - A UART object acts like a stream object and reading and writing is done using the standard stream methods:: @@ -50,12 +45,6 @@ using the standard stream methods:: *Note:* The stream functions ``read``, ``write``, etc. are new in MicroPython v1.3.4. Earlier versions use ``uart.send`` and ``uart.recv``. -.. only:: port_wipy - - To check if there is anything to be read, use:: - - uart.any() # returns the number of characters available for reading - Constructors ------------ @@ -77,14 +66,6 @@ Constructors - ``UART(3)`` is on ``YB``: ``(TX, RX) = (Y9, Y10) = (PB10, PB11)`` - ``UART(2)`` is on: ``(TX, RX) = (X3, X4) = (PA2, PA3)`` -.. only:: port_wipy - - .. class:: pyb.UART(bus, ...) - - Construct a UART object on the given bus. ``bus`` can be 0 or 1. - If the bus is not given, the default one will be selected (0) or the selection - will be made based on the given pins. - Methods ------- @@ -114,22 +95,6 @@ Methods *Note:* with parity=None, only 8 and 9 bits are supported. With parity enabled, only 7 and 8 bits are supported. -.. only:: port_wipy - - .. method:: uart.init(baudrate=9600, bits=8, parity=None, stop=1, \*, pins=(TX, RX, RTS, CTS)) - - Initialise the UART bus with the given parameters: - - - ``baudrate`` is the clock rate. - - ``bits`` is the number of bits per character, 7, 8 or 9. - - ``parity`` is the parity, ``None``, ``UART.EVEN`` or ``UART.ODD``. - - ``stop`` is the number of stop bits, 1 or 2. - - ``pins`` is a 4 or 2 item list indicating the TX, RX, RTS and CTS pins (in that order). - Any of the pins can be None if one wants the UART to operate with limited functionality. - If the RTS pin is given the the RX pin must be given as well. The same applies to CTS. - When no pins are given, then the default set of TX and RX pins is taken, and hardware - flow control will be disabled. If pins=None, no pin assignment will be made. - .. method:: uart.deinit() Turn off the UART bus. @@ -145,12 +110,6 @@ Methods Write a single character on the bus. ``char`` is an integer to write. Return value: ``None``. -.. only:: port_wipy - - .. method:: uart.any() - - Return the number of characters available for reading. - .. method:: uart.read([nbytes]) Read characters. If ``nbytes`` is specified then read at most that many bytes. @@ -163,11 +122,6 @@ Methods Return value: a bytes object containing the bytes read in. Returns ``b''`` on timeout. - .. only:: port_wipy - - Return value: a bytes object containing the bytes read in. Returns ``b''`` - on timeout. - .. method:: uart.readall() Read as much data as possible. @@ -204,43 +158,12 @@ Methods Return value: number of bytes written. - .. only:: port_wipy - - Write the buffer of bytes to the bus. - - Return value: number of bytes written. - .. method:: uart.sendbreak() Send a break condition on the bus. This drives the bus low for a duration of 13 bits. Return value: ``None``. -.. only:: port_wipy - - .. method:: uart.callback(value, priority=1, handler=None) - - Create a callback to be triggered when data is received on the UART. - - - ``value`` sets the size in bytes of the Rx buffer. Every character - received is put into this buffer as long as there's space free. - - ``priority`` level of the interrupt. Can take values in the range 1-7. - Higher values represent higher priorities. - - ``handler`` an optional function to be called when new characters arrive. - - .. note:: - - The handler will be called whenever any of the following two conditions are met: - - - 4 new characters have been received. - - At least 1 new character is waiting in the Rx buffer and the Rx line has been - silent for the duration of 1 complete frame. - - This means that when the handler function is called there might be 1, 2, 3 or 4 - characters waiting. - - Return a callback object. - Constants --------- @@ -250,9 +173,3 @@ Constants .. data:: UART.CTS to select the flow control type - -.. only:: port_wipy - - .. data:: UART.RX_ANY - - IRQ trigger sources diff --git a/docs/library/pyb.rst b/docs/library/pyb.rst index 98cb763ee3..546e7e5787 100644 --- a/docs/library/pyb.rst +++ b/docs/library/pyb.rst @@ -63,25 +63,14 @@ Time related functions Reset related functions ----------------------- -.. only:: port_pyboard +.. function:: hard_reset() - .. function:: hard_reset() - - Resets the pyboard in a manner similar to pushing the external RESET - button. + Resets the pyboard in a manner similar to pushing the external RESET + button. -.. only:: port_wipy +.. function:: bootloader() - .. function:: reset() - - Resets the WiPy in a manner similar to pushing the external RESET - button. - -.. only:: port_pyboard - - .. function:: bootloader() - - Activate the bootloader without BOOT\* pins. + Activate the bootloader without BOOT\* pins. Interrupt related functions --------------------------- @@ -175,15 +164,6 @@ Power related functions See :meth:`rtc.wakeup` to configure a real-time-clock wakeup event. -.. only:: port_wipy - - .. function:: freq([sysclk]) - - Returns a tuple of clock frequencies: ``(sysclk)`` - These correspond to: - - - sysclk: frequency of the CPU - Miscellaneous functions ----------------------- @@ -256,12 +236,6 @@ Miscellaneous functions Return a 30-bit hardware generated random number. -.. only:: port_wipy - - .. function:: rng() - - Return a 24-bit software generated random number. - .. function:: sync() Sync all file systems. @@ -272,13 +246,6 @@ Miscellaneous functions Returns a string of 12 bytes (96 bits), which is the unique ID of the MCU. -.. only:: port_wipy - - .. function:: unique_id() - - Returns a string of 6 bytes (48 bits), which is the unique ID of the MCU. - This also corresponds to the ``MAC address`` of the WiPy. - Classes ------- @@ -303,19 +270,3 @@ Classes pyb.Timer.rst pyb.UART.rst pyb.USB_VCP.rst - -.. only:: port_wipy - - .. toctree:: - :maxdepth: 1 - - pyb.ADC.rst - pyb.HeartBeat.rst - pyb.I2C.rst - pyb.Pin.rst - pyb.RTC.rst - pyb.SD.rst - pyb.SPI.rst - pyb.Timer.rst - pyb.UART.rst - pyb.WDT.rst diff --git a/docs/library/time.rst b/docs/library/time.rst index 8af8e37ba8..0dc18afb43 100644 --- a/docs/library/time.rst +++ b/docs/library/time.rst @@ -44,6 +44,46 @@ Functions Sleep for the given number of seconds. +.. only:: port_wipy + + .. function:: sleep_ms(ms) + + Delay for given number of milliseconds, should be positive or 0. + + .. function:: sleep_us(us) + + Delay for given number of microseconds, should be positive or 0 + + .. function:: ticks_ms() + + Returns an increasing millisecond counter with arbitrary reference point, + that wraps after some (unspecified) value. The value should be treated as + opaque, suitable for use only with ticks_diff(). + + .. function:: ticks_us() + + Just like ``ticks_ms`` above, but in microseconds. + + .. function:: ticks_cpu() + + Similar to ``ticks_ms`` and ``ticks_us``, but with higher resolution (usually CPU clocks). + + .. function:: ticks_diff(old, new) + + Measure period between consecutive calls to ticks_ms(), ticks_us(), or ticks_cpu(). + The value returned by these functions may wrap around at any time, so directly + subtracting them is not supported. ticks_diff() should be used instead. "old" value should + actually precede "new" value in time, or result is undefined. This function should not be + used to measure arbitrarily long periods of time (because ticks_*() functions wrap around + and usually would have short period). The expected usage pattern is implementing event + polling with timeout:: + + # Wait for GPIO pin to be asserted, but at most 500us + start = time.ticks_us() + while pin.value() == 0: + if time.ticks_diff(start, time.ticks_us()) > 500: + raise TimeoutError + .. function:: time() Returns the number of seconds, as an integer, since 1/1/2000. diff --git a/docs/wipy/general.rst b/docs/wipy/general.rst index d3d2f66aca..b1f78da529 100644 --- a/docs/wipy/general.rst +++ b/docs/wipy/general.rst @@ -1,6 +1,28 @@ General information about the WiPy ================================== +No floating point support +------------------------- + +Due to space reasons, there's no floating point support, and no math module. This +means that floating point numbers cannot be used anywhere in the code, and that +all divisions must be performed using '//' instead of '/'. Example:: + + r = 4 // 2 # this will work + r = 4 / 2 # this WON'T + +Before applying power +--------------------- + +.. warning:: + + The GPIO pins of the WiPy are NOT 5V tolerant, connecting them to voltages higer + than 3.6V will cause irreparable damage to the board. ADC pins, when configured + in analog mode cannot withstand volatges above 1.8V. Keep these considerations in + mind when wiring your electronics. + + + WLAN default behaviour ---------------------- @@ -28,6 +50,14 @@ Open your FTP client of choice and connect to: ``ftp://192.168.1.1``, ``user: micro``, ``password: python`` +The FTP server on the WiPy doesn't support active mode, only passive, so for instance +if using the native unix ftp client, just after logging in:: + + ftp> passive + +Besides that, the FTP server only supports onw data connection at a time. Check out +the Filezilla settings section below for more info. + FileZilla settings ------------------ Do not use the quick connect button, instead, open the site manager and create a new @@ -46,8 +76,8 @@ inside ``/flash/sys/`` because it's actually saved bypassing the user file syste assured that it was successfully transferred, and it has been signed with a MD5 checksum to verify its integrity. Now, reset the MCU by pressing the switch on the board, or by typing:: - import pyb - pyb.reset() + import machine + machine.reset() Boot modes ---------- @@ -91,7 +121,7 @@ The heart beat LED By default the heart beat LED flashes once every 4s to signal that the system is alive. This can be overridden through the HeartBeat class: -``pyb.HeartBeat().disable()`` +``machine.HeartBeat().disable()`` There are currently 2 kinds of errors that you might see: diff --git a/docs/wipy/quickref.rst b/docs/wipy/quickref.rst index eb8a12e8be..c99671752d 100644 --- a/docs/wipy/quickref.rst +++ b/docs/wipy/quickref.rst @@ -7,25 +7,28 @@ Quick reference for the WiPy :alt: WiPy pinout and alternate functions table :width: 800px -General board control ---------------------- +General board control (including sleep modes) +--------------------------------------------- -See :mod:`pyb`. :: +See :mod:`machine`. :: - import pyb + import machine - help(pyb) # display all members from the pyb module - pyb.delay(50) # wait 50 milliseconds - pyb.millis() # number of milliseconds since boot-up - pyb.freq() # get the CPU frequency - pyb.unique_id() # return the 6-byte unique id of the board (the WiPy's MAC address) + help(machine) # display all members from the machine module + machine.freq() # get the CPU frequency + machine.unique_id() # return the 6-byte unique id of the board (the WiPy's MAC address) + + machine.idle() # average curernt decreases to (~12mA), any interrupts wakes it up + machine.sleep() # everything except for WLAN is powered down (~950uA avg. current) + # wakes from Pin, RTC or WLAN + machine.deepsleep() # deepest sleep mode, MCU starts from reset. Wakes from Pin and RTC. Pins and GPIO ------------- -See :ref:`pyb.Pin `. :: +See :ref:`machine.Pin `. :: - from pyb import Pin + from machine import Pin # initialize GP2 in gpio mode (af=0) and make it an output p_out = Pin('GP2', mode=Pin.OUT) @@ -35,16 +38,16 @@ See :ref:`pyb.Pin `. :: p_out(True) # make GP1 an input with the pull-up enabled - p_in = Pin('GP1', mode=Pin.IN, pull = Pin.PULL_UP) + p_in = Pin('GP1', mode=Pin.IN, pull=Pin.PULL_UP) p_in() # get value, 0 or 1 Timers ------ -See :ref:`pyb.Timer ` and :ref:`pyb.Pin `. :: +See :ref:`machine.Timer ` and :ref:`machine.Pin `. :: - from pyb import Timer - from pyb import Pin + from machine import Timer + from machine import Pin tim = Timer(1, mode=Timer.PERIODIC) tim_a = tim.channel(Timer.A, freq=1000) @@ -52,18 +55,18 @@ See :ref:`pyb.Timer ` and :ref:`pyb.Pin `. :: tim_a.freq(1) # 1 Hz p_out = Pin('GP2', af=0, mode=Pin.OUT) - tim_a.callback(handler=lambda t: p_out.toggle()) + tim_a.irq(handler=lambda t: p_out.toggle()) PWM (pulse width modulation) ---------------------------- -See :ref:`pyb.Pin ` and :ref:`pyb.Timer `. :: +See :ref:`machine.Pin ` and :ref:`machine.Timer `. :: - from pyb import Timer - from pyb import Pin + from machine import Timer + from machine import Pin - # assign GP25 to alternate function 5 (PWM) - p_out = Pin('GP25', af=9, type=Pin.STD) + # assign GP25 to alternate function 9 (PWM) + p_out = Pin('GP25', mode=Pin.AF, af=9) # timer 2 in PWM mode and width must be 16 buts tim = Timer(2, mode=Timer.PWM, width=16) @@ -74,9 +77,9 @@ See :ref:`pyb.Pin ` and :ref:`pyb.Timer `. :: ADC (analog to digital conversion) ---------------------------------- -See :ref:`pyb.ADC `. :: +See :ref:`machine.ADC `. :: - from pyb import ADC + from machine import ADC adc = ADC() apin = adc.channel(pin='GP3') @@ -85,19 +88,19 @@ See :ref:`pyb.ADC `. :: UART (serial bus) ----------------- -See :ref:`pyb.Pin ` and :ref:`pyb.UART `. :: +See :ref:`machine.Pin ` and :ref:`machine.UART `. :: - from pyb import Pin, UART - uart = UART(0, 9600) + from machine import Pin, UART + uart = UART(0, baudrate=9600) uart.write('hello') uart.read(5) # read up to 5 bytes SPI bus ------- -See :ref:`pyb.SPI `. :: +See :ref:`machine.SPI `. :: - from pyb SPI + from machine SPI # configure the SPI master @ 2MHz spi = SPI(0, SPI.MASTER, baudrate=200000, polarity=0, phase=0) @@ -109,9 +112,9 @@ See :ref:`pyb.SPI `. :: I2C bus ------- -See :ref:`pyb.Pin ` and :ref:`pyb.I2C `. :: +See :ref:`machine.Pin ` and :ref:`machine.I2C `. :: - from pyb import Pin, I2C + from machine import Pin, I2C # configure the I2C bus i2c = I2C(0, I2C.MASTER, baudrate=100000) i2c.scan() # returns list of slave addresses @@ -123,9 +126,9 @@ See :ref:`pyb.Pin ` and :ref:`pyb.I2C `. :: Watchdog timer (WDT) -------------------- -See :ref:`pyb.WDT `. :: +See :ref:`machine.WDT `. :: - from pyb import WDT + from machine import WDT # enable the WDT with a timeout of 5s (1s is the minimum) wdt = WDT(timeout=5000) @@ -134,79 +137,73 @@ See :ref:`pyb.WDT `. :: Real time clock (RTC) --------------------- -See :ref:`pyb.RTC ` and ``pyb.Sleep``. :: +See :ref:`machine.RTC ` :: - from pyb import RTC, Sleep + import machine + from machine import RTC - rtc = pyb.RTC() - rtc.datetime((2014, 5, 1, 4, 13, 0, 0, 0)) - print(rtc.datetime()) + rtc = machine.RTC() # init with default time and date + rtc = RTC(datetime=(2015, 8, 29, 9, 0, 0, 0, None)) # init with a specific time and date + print(rtc.now()) - def some_handler (rtc_obj): - # trigger the callback again in 30s - rtc_obj.callback(value=30000, handler=some_handler) + def alarm_handler (rtc_o): + pass + # do some non blocking operations + # warning printing on an irq via telnet is not + # possible, only via UART - # create a RTC alarm that expires in 30s - rtc.callback(value=30000, handler=some_handler, wake_from=Sleep.SUSPENDED) + # create a RTC alarm that expires after 5 seconds + rtc.alarm(time=5000, repeat=False) + + # enable RTC interrupts + rtc_i = rtc.irq(trigger=RTC.ALARM0, handler=alarm_handler, wake=machine.SLEEP) # go into suspended mode waiting for the RTC alarm to expire and wake us up - Sleep.suspend() + machine.sleep() SD card ------- -See :ref:`pyb.SD `. :: +See :ref:`machine.SD `. :: - from pyb import SD + from machine import SD import os - # SD card pins need special configuration so we pass them to the constructor # clock pin, cmd pin, data0 pin sd = SD(pins=('GP10', 'GP11', 'GP15')) + # or use default ones for the expansion board + sd = SD() os.mount(sd, '/sd') WLAN (WiFi) ----------- -See :ref:`network.WLAN ` and ``pyb.Sleep``. :: +See :ref:`network.WLAN ` and :mod:`machine`. :: + import machine from network import WLAN - from pyb import Sleep # configure the WLAN subsystem in station mode (the default is AP) - wifi = WLAN(WLAN.STA) + wifi = WLAN(mode=WLAN.STA) # go for fixed IP settings - wifi.ifconfig(('192.168.0.107', '255.255.255.0', '192.168.0.1', '8.8.8.8')) + wifi.ifconfig(config=('192.168.0.107', '255.255.255.0', '192.168.0.1', '8.8.8.8')) wifi.scan() # scan for available netrworks - wifi.connect(ssid='mynetwork', security=2, key='mynetworkkey') + wifi.connect(ssid='mynetwork', auth=(WLAN.WPA2, 'mynetworkkey')) while not wifi.isconnected(): pass print(wifi.ifconfig()) # enable wake on WLAN - wifi.callback(wake_from=Sleep.SUSPENDED) + wifi.irq(wake=machine.SLEEP) # go to sleep - Sleep.suspend() + machine.sleep() # now, connect to the FTP or the Telnet server and the WiPy will wake-up -Sleep and power modes control ------------------------------ - -See ``pyb.Sleep``. :: - - from pyb import Sleep - - Sleep.idle() # lowest sleep mode (~12mA), any interrupts wakes it up - Sleep.suspend() # everything except for WLAN is powered down (~950uA) - # wakes from Pin, RTC or WLAN - - Sleep.hibernate() # deepest sleep mode, MCU starts from reset. Wakes from Pin and RTC. - Heart beat LED -------------- -See :ref:`pyb.HeartBeat `. :: +See :ref:`machine.HeartBeat `. :: - from pyb import HeartBeat + from machine import HeartBeat # disable the heart beat indication (you are free to use this LED connected to GP25) HeartBeat().disable()