Merge pull request #1152 from tannewt/hallowing

Introduce displayio to render graphics to displays.

locale/circuitpython.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-08-30 23:06-0700\n"
+"POT-Creation-Date: 2018-09-06 14:55-0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -231,15 +231,15 @@ msgstr ""
 msgid "calibration is out of range"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:39
+#: ports/atmel-samd/board_busses.c:39 ports/nrf/board_busses.c:39
 msgid "No default I2C bus"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:64
+#: ports/atmel-samd/board_busses.c:64 ports/nrf/board_busses.c:64
 msgid "No default SPI bus"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:91
+#: ports/atmel-samd/board_busses.c:91 ports/nrf/board_busses.c:91
 msgid "No default UART bus"
 msgstr ""
 
@@ -388,12 +388,12 @@ msgstr ""
 msgid "No RX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c:284
+#: ports/atmel-samd/common-hal/busio/UART.c:288
 msgid "No TX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:168
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:170
-#: ports/nrf/common-hal/digitalio/DigitalInOut.c:158
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c:153
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -426,12 +426,12 @@ msgstr ""
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:203
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:205
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:151
 msgid "pop from an empty PulseIn"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:235
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:420
 msgid "index out of range"
 msgstr ""
@@ -685,11 +685,11 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:45 ports/nrf/common-hal/busio/UART.c:49
+#: ports/nrf/common-hal/busio/UART.c:43 ports/nrf/common-hal/busio/UART.c:47
-#: ports/nrf/common-hal/busio/UART.c:53 ports/nrf/common-hal/busio/UART.c:62
+#: ports/nrf/common-hal/busio/UART.c:51 ports/nrf/common-hal/busio/UART.c:60
-#: ports/nrf/common-hal/busio/UART.c:68 ports/nrf/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:66 ports/nrf/common-hal/busio/UART.c:71
-#: ports/nrf/common-hal/busio/UART.c:78 ports/nrf/common-hal/busio/UART.c:83
+#: ports/nrf/common-hal/busio/UART.c:76 ports/nrf/common-hal/busio/UART.c:81
-#: ports/nrf/common-hal/busio/UART.c:88
+#: ports/nrf/common-hal/busio/UART.c:86
 msgid "busio.UART not yet implemented"
 msgstr ""
 
@@ -2022,6 +2022,60 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: shared-bindings/displayio/Bitmap.c:84
+msgid "y should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:89
+msgid "row buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:94
+msgid "row data must be a buffer"
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c:55
+#: shared-bindings/displayio/FourWire.c:64
+msgid "displayio is a work in progress"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c:65
+msgid "Group must have size at least 1"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:96
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:102
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:106
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:110
+msgid "color buffer must be a buffer or int"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:123
+#: shared-bindings/displayio/Palette.c:137
+msgid "palette_index should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:45
+msgid "position must be 2-tuple"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:87
+msgid "unsupported bitmap type"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:152
+msgid "palette must be displayio.Palette"
+msgstr ""
+
 #: shared-bindings/gamepad/GamePad.c:100
 msgid "too many arguments"
 msgstr ""
@@ -2236,6 +2290,18 @@ msgstr ""
 msgid "Cannot transfer without MOSI and MISO pins."
 msgstr ""
 
+#: shared-module/displayio/Bitmap.c:49
+msgid "Only bit maps of 8 bit color or less are supported"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:69
+msgid "row must be packed and word aligned"
+msgstr ""
+
+#: shared-module/displayio/Group.c:39
+msgid "Group full"
+msgstr ""
+
 #: shared-module/struct/__init__.c:39
 msgid "'S' and 'O' are not supported format types"
 msgstr ""

locale/de_DE.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-08-20 09:37-0700\n"
+"POT-Creation-Date: 2018-09-06 14:55-0700\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Sebastian Plamauer\n"
 "Language-Team: \n"
@@ -159,7 +159,8 @@ msgstr " Ausgabe:\n"
 msgid ""
 "Auto-reload is on. Simply save files over USB to run them or enter REPL to "
 "disable.\n"
-msgstr "Automatisches Neuladen ist aktiv. Speichere Dateien über USB um sie "
+msgstr ""
+"Automatisches Neuladen ist aktiv. Speichere Dateien über USB um sie "
 "auszuführen oder verbinde dich mit der REPL um zu deaktivieren.\n"
 
 #: main.c:159
@@ -197,26 +198,30 @@ msgstr "CircuitPython ist abgestürzt. Ups!\n"
 
 #: main.c:252
 msgid "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-msgstr "Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
+msgstr ""
+"Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
 
 #: main.c:255
 msgid ""
 "The microcontroller's power dipped. Please make sure your power supply "
 "provides\n"
-msgstr "Die Stromversorgung des Mikrocontrollers ist eingebrochen. Stelle sicher,"
+msgstr ""
+"Die Stromversorgung des Mikrocontrollers ist eingebrochen. Stelle sicher,"
 "dass deine Stromversorgung\n"
 
 #: main.c:256
 msgid ""
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
-msgstr "genug Strom für den ganzen Schaltkreis liefert und drücke reset (nach dem"
+msgstr ""
-"sicheren Auswerfen von CIRCUITPY.)\n"
+"genug Strom für den ganzen Schaltkreis liefert und drücke reset (nach "
+"demsicheren Auswerfen von CIRCUITPY.)\n"
 
 #: main.c:260
 msgid "Press any key to enter the REPL. Use CTRL-D to reload."
-msgstr "Drücke eine Taste um dich mit der REPL zu verbinden. Drücke Strg-D zum neu"
+msgstr ""
-" laden"
+"Drücke eine Taste um dich mit der REPL zu verbinden. Drücke Strg-D zum neu "
+"laden"
 
 #: main.c:415
 msgid "soft reboot\n"
@@ -235,15 +240,15 @@ msgstr "Kalibrierung ist Schreibgeschützt"
 msgid "calibration is out of range"
 msgstr "Kalibrierung ist außerhalb der Reichweite"
 
-#: ports/atmel-samd/board_busses.c:39
+#: ports/atmel-samd/board_busses.c:39 ports/nrf/board_busses.c:39
 msgid "No default I2C bus"
 msgstr "Kein Standard I2C Bus"
 
-#: ports/atmel-samd/board_busses.c:64
+#: ports/atmel-samd/board_busses.c:64 ports/nrf/board_busses.c:64
 msgid "No default SPI bus"
 msgstr "Kein Standard SPI Bus"
 
-#: ports/atmel-samd/board_busses.c:91
+#: ports/atmel-samd/board_busses.c:91 ports/nrf/board_busses.c:91
 msgid "No default UART bus"
 msgstr "Kein Standard UART Bus"
 
@@ -392,12 +397,12 @@ msgstr "Konnte UART nicht initialisieren"
 msgid "No RX pin"
 msgstr "Kein RX Pin"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:284
+#: ports/atmel-samd/common-hal/busio/UART.c:288
 msgid "No TX pin"
 msgstr "Kein TX Pin"
 
-#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:168
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:170
-#: ports/nrf/common-hal/digitalio/DigitalInOut.c:158
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c:153
 msgid "Cannot get pull while in output mode"
 msgstr "Pull up im Ausgabemodus nicht möglich"
 
@@ -430,12 +435,12 @@ msgstr "EXTINT Kanal wird benutzt"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Konnte keine RX Buffer mit %d allozieren"
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:203
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:205
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:151
 msgid "pop from an empty PulseIn"
 msgstr "pop von einem leeren PulseIn"
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:235
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:420
 msgid "index out of range"
 msgstr "index außerhalb der Reichweite"
@@ -614,11 +619,11 @@ msgid "frequency can only be either 80Mhz or 160MHz"
 msgstr ""
 
 #: ports/esp8266/modnetwork.c:61
-msgid "STA required"
+msgid "AP required"
 msgstr ""
 
 #: ports/esp8266/modnetwork.c:61
-msgid "AP required"
+msgid "STA required"
 msgstr ""
 
 #: ports/esp8266/modnetwork.c:87
@@ -689,11 +694,11 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:45 ports/nrf/common-hal/busio/UART.c:49
+#: ports/nrf/common-hal/busio/UART.c:43 ports/nrf/common-hal/busio/UART.c:47
-#: ports/nrf/common-hal/busio/UART.c:53 ports/nrf/common-hal/busio/UART.c:62
+#: ports/nrf/common-hal/busio/UART.c:51 ports/nrf/common-hal/busio/UART.c:60
-#: ports/nrf/common-hal/busio/UART.c:68 ports/nrf/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:66 ports/nrf/common-hal/busio/UART.c:71
-#: ports/nrf/common-hal/busio/UART.c:78 ports/nrf/common-hal/busio/UART.c:83
+#: ports/nrf/common-hal/busio/UART.c:76 ports/nrf/common-hal/busio/UART.c:81
-#: ports/nrf/common-hal/busio/UART.c:88
+#: ports/nrf/common-hal/busio/UART.c:86
 msgid "busio.UART not yet implemented"
 msgstr ""
 
@@ -2026,6 +2031,61 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: shared-bindings/displayio/Bitmap.c:84
+msgid "y should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:89
+msgid "row buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:94
+msgid "row data must be a buffer"
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c:55
+#: shared-bindings/displayio/FourWire.c:64
+msgid "displayio is a work in progress"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c:65
+msgid "Group must have size at least 1"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:96
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:102
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:106
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:110
+msgid "color buffer must be a buffer or int"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:123
+#: shared-bindings/displayio/Palette.c:137
+msgid "palette_index should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:45
+msgid "position must be 2-tuple"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:87
+#, fuzzy
+msgid "unsupported bitmap type"
+msgstr "Baudrate wird nicht unterstütz"
+
+#: shared-bindings/displayio/Sprite.c:152
+msgid "palette must be displayio.Palette"
+msgstr ""
+
 #: shared-bindings/gamepad/GamePad.c:100
 msgid "too many arguments"
 msgstr ""
@@ -2131,7 +2191,7 @@ msgid "empty sequence"
 msgstr ""
 
 #: shared-bindings/rtc/RTC.c:40 shared-bindings/rtc/RTC.c:44
-#: shared-bindings/time/__init__.c:192
+#: shared-bindings/time/__init__.c:190
 msgid "RTC is not supported on this board"
 msgstr ""
 
@@ -2151,27 +2211,27 @@ msgstr ""
 msgid "Stack size must be at least 256"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:80
+#: shared-bindings/time/__init__.c:78
 msgid "sleep length must be non-negative"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:90
+#: shared-bindings/time/__init__.c:88
 msgid "time.struct_time() takes exactly 1 argument"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:93
+#: shared-bindings/time/__init__.c:91
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:171 shared-bindings/time/__init__.c:252
+#: shared-bindings/time/__init__.c:169 shared-bindings/time/__init__.c:250
 msgid "Tuple or struct_time argument required"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:176 shared-bindings/time/__init__.c:257
+#: shared-bindings/time/__init__.c:174 shared-bindings/time/__init__.c:255
 msgid "function takes exactly 9 arguments"
 msgstr ""
 
-#: shared-bindings/time/__init__.c:228 shared-bindings/time/__init__.c:261
+#: shared-bindings/time/__init__.c:226 shared-bindings/time/__init__.c:259
 msgid "timestamp out of range for platform time_t"
 msgstr ""
 
@@ -2240,6 +2300,18 @@ msgstr ""
 msgid "Cannot transfer without MOSI and MISO pins."
 msgstr ""
 
+#: shared-module/displayio/Bitmap.c:49
+msgid "Only bit maps of 8 bit color or less are supported"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:69
+msgid "row must be packed and word aligned"
+msgstr ""
+
+#: shared-module/displayio/Group.c:39
+msgid "Group full"
+msgstr ""
+
 #: shared-module/struct/__init__.c:39
 msgid "'S' and 'O' are not supported format types"
 msgstr ""

locale/en_US.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-08-30 16:12-0700\n"
+"POT-Creation-Date: 2018-09-06 14:55-0700\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -231,15 +231,15 @@ msgstr ""
 msgid "calibration is out of range"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:39
+#: ports/atmel-samd/board_busses.c:39 ports/nrf/board_busses.c:39
 msgid "No default I2C bus"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:64
+#: ports/atmel-samd/board_busses.c:64 ports/nrf/board_busses.c:64
 msgid "No default SPI bus"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:91
+#: ports/atmel-samd/board_busses.c:91 ports/nrf/board_busses.c:91
 msgid "No default UART bus"
 msgstr ""
 
@@ -388,12 +388,12 @@ msgstr ""
 msgid "No RX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c:284
+#: ports/atmel-samd/common-hal/busio/UART.c:288
 msgid "No TX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:168
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:170
-#: ports/nrf/common-hal/digitalio/DigitalInOut.c:158
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c:153
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -426,12 +426,12 @@ msgstr ""
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:203
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:205
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:151
 msgid "pop from an empty PulseIn"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:235
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:420
 msgid "index out of range"
 msgstr ""
@@ -685,11 +685,11 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:45 ports/nrf/common-hal/busio/UART.c:49
+#: ports/nrf/common-hal/busio/UART.c:43 ports/nrf/common-hal/busio/UART.c:47
-#: ports/nrf/common-hal/busio/UART.c:53 ports/nrf/common-hal/busio/UART.c:62
+#: ports/nrf/common-hal/busio/UART.c:51 ports/nrf/common-hal/busio/UART.c:60
-#: ports/nrf/common-hal/busio/UART.c:68 ports/nrf/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:66 ports/nrf/common-hal/busio/UART.c:71
-#: ports/nrf/common-hal/busio/UART.c:78 ports/nrf/common-hal/busio/UART.c:83
+#: ports/nrf/common-hal/busio/UART.c:76 ports/nrf/common-hal/busio/UART.c:81
-#: ports/nrf/common-hal/busio/UART.c:88
+#: ports/nrf/common-hal/busio/UART.c:86
 msgid "busio.UART not yet implemented"
 msgstr ""
 
@@ -2022,6 +2022,60 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: shared-bindings/displayio/Bitmap.c:84
+msgid "y should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:89
+msgid "row buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:94
+msgid "row data must be a buffer"
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c:55
+#: shared-bindings/displayio/FourWire.c:64
+msgid "displayio is a work in progress"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c:65
+msgid "Group must have size at least 1"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:96
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:102
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:106
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:110
+msgid "color buffer must be a buffer or int"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:123
+#: shared-bindings/displayio/Palette.c:137
+msgid "palette_index should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:45
+msgid "position must be 2-tuple"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:87
+msgid "unsupported bitmap type"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:152
+msgid "palette must be displayio.Palette"
+msgstr ""
+
 #: shared-bindings/gamepad/GamePad.c:100
 msgid "too many arguments"
 msgstr ""
@@ -2236,6 +2290,18 @@ msgstr ""
 msgid "Cannot transfer without MOSI and MISO pins."
 msgstr ""
 
+#: shared-module/displayio/Bitmap.c:49
+msgid "Only bit maps of 8 bit color or less are supported"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:69
+msgid "row must be packed and word aligned"
+msgstr ""
+
+#: shared-module/displayio/Group.c:39
+msgid "Group full"
+msgstr ""
+
 #: shared-module/struct/__init__.c:39
 msgid "'S' and 'O' are not supported format types"
 msgstr ""

locale/es.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-08-30 16:12-0700\n"
+"POT-Creation-Date: 2018-09-06 14:55-0700\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -246,15 +246,15 @@ msgstr ""
 msgid "calibration is out of range"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:39
+#: ports/atmel-samd/board_busses.c:39 ports/nrf/board_busses.c:39
 msgid "No default I2C bus"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:64
+#: ports/atmel-samd/board_busses.c:64 ports/nrf/board_busses.c:64
 msgid "No default SPI bus"
 msgstr ""
 
-#: ports/atmel-samd/board_busses.c:91
+#: ports/atmel-samd/board_busses.c:91 ports/nrf/board_busses.c:91
 msgid "No default UART bus"
 msgstr ""
 
@@ -404,12 +404,12 @@ msgstr ""
 msgid "No RX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c:284
+#: ports/atmel-samd/common-hal/busio/UART.c:288
 msgid "No TX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:168
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:170
-#: ports/nrf/common-hal/digitalio/DigitalInOut.c:158
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c:153
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -442,12 +442,12 @@ msgstr "El canal EXTINT ya esta siendo usado"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Fallo la asignación del buffer RX de %d bytes"
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:203
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:205
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:151
 msgid "pop from an empty PulseIn"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:235
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:420
 msgid "index out of range"
 msgstr ""
@@ -703,11 +703,11 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:45 ports/nrf/common-hal/busio/UART.c:49
+#: ports/nrf/common-hal/busio/UART.c:43 ports/nrf/common-hal/busio/UART.c:47
-#: ports/nrf/common-hal/busio/UART.c:53 ports/nrf/common-hal/busio/UART.c:62
+#: ports/nrf/common-hal/busio/UART.c:51 ports/nrf/common-hal/busio/UART.c:60
-#: ports/nrf/common-hal/busio/UART.c:68 ports/nrf/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:66 ports/nrf/common-hal/busio/UART.c:71
-#: ports/nrf/common-hal/busio/UART.c:78 ports/nrf/common-hal/busio/UART.c:83
+#: ports/nrf/common-hal/busio/UART.c:76 ports/nrf/common-hal/busio/UART.c:81
-#: ports/nrf/common-hal/busio/UART.c:88
+#: ports/nrf/common-hal/busio/UART.c:86
 msgid "busio.UART not yet implemented"
 msgstr ""
 
@@ -2068,6 +2068,60 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: shared-bindings/displayio/Bitmap.c:84
+msgid "y should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:89
+msgid "row buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:94
+msgid "row data must be a buffer"
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c:55
+#: shared-bindings/displayio/FourWire.c:64
+msgid "displayio is a work in progress"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c:65
+msgid "Group must have size at least 1"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:96
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:102
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:106
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:110
+msgid "color buffer must be a buffer or int"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:123
+#: shared-bindings/displayio/Palette.c:137
+msgid "palette_index should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:45
+msgid "position must be 2-tuple"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:87
+msgid "unsupported bitmap type"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:152
+msgid "palette must be displayio.Palette"
+msgstr ""
+
 #: shared-bindings/gamepad/GamePad.c:100
 msgid "too many arguments"
 msgstr ""
@@ -2283,6 +2337,18 @@ msgstr ""
 msgid "Cannot transfer without MOSI and MISO pins."
 msgstr ""
 
+#: shared-module/displayio/Bitmap.c:49
+msgid "Only bit maps of 8 bit color or less are supported"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:69
+msgid "row must be packed and word aligned"
+msgstr ""
+
+#: shared-module/displayio/Group.c:39
+msgid "Group full"
+msgstr ""
+
 #: shared-module/struct/__init__.c:39
 msgid "'S' and 'O' are not supported format types"
 msgstr ""

locale/fil.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-08-30 18:29-0700\n"
+"POT-Creation-Date: 2018-09-06 14:55-0700\n"
 "PO-Revision-Date: 2018-08-30 23:04-0700\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -243,15 +243,15 @@ msgstr "pagkakalibrate ay basahin lamang"
 msgid "calibration is out of range"
 msgstr "kalibrasion ay wala sa sakop"
 
-#: ports/atmel-samd/board_busses.c:39
+#: ports/atmel-samd/board_busses.c:39 ports/nrf/board_busses.c:39
 msgid "No default I2C bus"
 msgstr "Walang default na I2C bus"
 
-#: ports/atmel-samd/board_busses.c:64
+#: ports/atmel-samd/board_busses.c:64 ports/nrf/board_busses.c:64
 msgid "No default SPI bus"
 msgstr "Walang default SPI bus"
 
-#: ports/atmel-samd/board_busses.c:91
+#: ports/atmel-samd/board_busses.c:91 ports/nrf/board_busses.c:91
 msgid "No default UART bus"
 msgstr "Walang default UART bus"
 
@@ -400,12 +400,12 @@ msgstr "Hindi ma-initialize ang UART"
 msgid "No RX pin"
 msgstr "Walang RX pin"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:284
+#: ports/atmel-samd/common-hal/busio/UART.c:288
 msgid "No TX pin"
 msgstr "Walang TX pin"
 
-#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:168
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:170
-#: ports/nrf/common-hal/digitalio/DigitalInOut.c:158
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c:153
 msgid "Cannot get pull while in output mode"
 msgstr "Hindi makakakuha ng pull habang nasa output mode"
 
@@ -438,12 +438,12 @@ msgstr "Ginagamit na ang EXTINT channel"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Nabigong ilaan ang RX buffer ng %d bytes"
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:203
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:205
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:151
 msgid "pop from an empty PulseIn"
 msgstr "pop mula sa walang laman na PulseIn"
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:235
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:420
 msgid "index out of range"
 msgstr "index wala sa sakop"
@@ -700,11 +700,11 @@ msgstr "hindi alam na config param"
 msgid "AnalogOut functionality not supported"
 msgstr "Hindi supportado ang AnalogOut"
 
-#: ports/nrf/common-hal/busio/UART.c:45 ports/nrf/common-hal/busio/UART.c:49
+#: ports/nrf/common-hal/busio/UART.c:43 ports/nrf/common-hal/busio/UART.c:47
-#: ports/nrf/common-hal/busio/UART.c:53 ports/nrf/common-hal/busio/UART.c:62
+#: ports/nrf/common-hal/busio/UART.c:51 ports/nrf/common-hal/busio/UART.c:60
-#: ports/nrf/common-hal/busio/UART.c:68 ports/nrf/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:66 ports/nrf/common-hal/busio/UART.c:71
-#: ports/nrf/common-hal/busio/UART.c:78 ports/nrf/common-hal/busio/UART.c:83
+#: ports/nrf/common-hal/busio/UART.c:76 ports/nrf/common-hal/busio/UART.c:81
-#: ports/nrf/common-hal/busio/UART.c:88
+#: ports/nrf/common-hal/busio/UART.c:86
 msgid "busio.UART not yet implemented"
 msgstr "hindi pa implemented ang busio.UART"
 
@@ -2060,6 +2060,74 @@ msgstr "Pull hindi ginagamit kapag ang direksyon ay output."
 msgid "Unsupported pull value."
 msgstr "Hindi suportado ang pull value."
 
+#: shared-bindings/displayio/Bitmap.c:84
+#, fuzzy
+msgid "y should be an int"
+msgstr "Haba ay dapat int"
+
+#: shared-bindings/displayio/Bitmap.c:89
+#, fuzzy
+msgid "row buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+"ang sample_source buffer ay dapat na isang bytearray o array ng uri na 'h', "
+"'H', 'b' o'B'"
+
+#: shared-bindings/displayio/Bitmap.c:94
+#, fuzzy
+msgid "row data must be a buffer"
+msgstr "constant ay dapat na integer"
+
+#: shared-bindings/displayio/FourWire.c:55
+#: shared-bindings/displayio/FourWire.c:64
+msgid "displayio is a work in progress"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c:65
+#, fuzzy
+msgid "Group must have size at least 1"
+msgstr "Buffer dapat ay hindi baba sa 1 na haba"
+
+#: shared-bindings/displayio/Palette.c:96
+#, fuzzy
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+"ang sample_source buffer ay dapat na isang bytearray o array ng uri na 'h', "
+"'H', 'b' o'B'"
+
+#: shared-bindings/displayio/Palette.c:102
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:106
+#, fuzzy
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr "Sa gitna ng 0 o 255 dapat ang bytes."
+
+#: shared-bindings/displayio/Palette.c:110
+#, fuzzy
+msgid "color buffer must be a buffer or int"
+msgstr "buffer ay dapat bytes-like object"
+
+#: shared-bindings/displayio/Palette.c:123
+#: shared-bindings/displayio/Palette.c:137
+msgid "palette_index should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:45
+#, fuzzy
+msgid "position must be 2-tuple"
+msgstr "stop dapat 1 o 2"
+
+#: shared-bindings/displayio/Sprite.c:87
+#, fuzzy
+msgid "unsupported bitmap type"
+msgstr "Hindi supportadong baudrate"
+
+#: shared-bindings/displayio/Sprite.c:152
+#, fuzzy
+msgid "palette must be displayio.Palette"
+msgstr "ang palette ay dapat 32 bytes ang haba"
+
 #: shared-bindings/gamepad/GamePad.c:100
 msgid "too many arguments"
 msgstr "masyadong maraming argumento"
@@ -2277,6 +2345,18 @@ msgstr "Hindi maaring mabasa kapag walang MISO pin."
 msgid "Cannot transfer without MOSI and MISO pins."
 msgstr "Hindi maaaring ilipat kapag walang MOSI at MISO pin."
 
+#: shared-module/displayio/Bitmap.c:49
+msgid "Only bit maps of 8 bit color or less are supported"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:69
+msgid "row must be packed and word aligned"
+msgstr ""
+
+#: shared-module/displayio/Group.c:39
+msgid "Group full"
+msgstr ""
+
 #: shared-module/struct/__init__.c:39
 msgid "'S' and 'O' are not supported format types"
 msgstr "Ang 'S' at 'O' ay hindi suportadong uri ng format"

locale/fr.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-08-30 16:12-0700\n"
+"POT-Creation-Date: 2018-09-06 14:55-0700\n"
 "PO-Revision-Date: 2018-08-14 11:01+0200\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -238,15 +238,15 @@ msgstr "la calibration est en lecture seule"
 msgid "calibration is out of range"
 msgstr "la calibration est hors gamme"
 
-#: ports/atmel-samd/board_busses.c:39
+#: ports/atmel-samd/board_busses.c:39 ports/nrf/board_busses.c:39
 msgid "No default I2C bus"
 msgstr "Pas de bus I2C par défaut"
 
-#: ports/atmel-samd/board_busses.c:64
+#: ports/atmel-samd/board_busses.c:64 ports/nrf/board_busses.c:64
 msgid "No default SPI bus"
 msgstr "Pas de bus SPI par défaut"
 
-#: ports/atmel-samd/board_busses.c:91
+#: ports/atmel-samd/board_busses.c:91 ports/nrf/board_busses.c:91
 msgid "No default UART bus"
 msgstr "Pas de bus UART par défaut"
 
@@ -395,12 +395,12 @@ msgstr "L'UART n'a pu être initialisé"
 msgid "No RX pin"
 msgstr "Pas de broche RX"
 
-#: ports/atmel-samd/common-hal/busio/UART.c:284
+#: ports/atmel-samd/common-hal/busio/UART.c:288
 msgid "No TX pin"
 msgstr "Pas de broche TX"
 
-#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:168
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:170
-#: ports/nrf/common-hal/digitalio/DigitalInOut.c:158
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c:153
 msgid "Cannot get pull while in output mode"
 msgstr "Ne peux être tirer ('pull') en mode 'output'"
 
@@ -434,12 +434,12 @@ msgstr "Canal EXTINT déjà utilisé"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Echec de l'allocation de %d octets du tampon RX"
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:203
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:205
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:151
 msgid "pop from an empty PulseIn"
 msgstr "'pop' d'une entrée PulseIn vide"
 
-#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:235
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
 #: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:420
 msgid "index out of range"
 msgstr "index hors gamme"
@@ -696,11 +696,11 @@ msgstr "paramètre de config. inconnu"
 msgid "AnalogOut functionality not supported"
 msgstr "AnalogOut non supporté"
 
-#: ports/nrf/common-hal/busio/UART.c:45 ports/nrf/common-hal/busio/UART.c:49
+#: ports/nrf/common-hal/busio/UART.c:43 ports/nrf/common-hal/busio/UART.c:47
-#: ports/nrf/common-hal/busio/UART.c:53 ports/nrf/common-hal/busio/UART.c:62
+#: ports/nrf/common-hal/busio/UART.c:51 ports/nrf/common-hal/busio/UART.c:60
-#: ports/nrf/common-hal/busio/UART.c:68 ports/nrf/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:66 ports/nrf/common-hal/busio/UART.c:71
-#: ports/nrf/common-hal/busio/UART.c:78 ports/nrf/common-hal/busio/UART.c:83
+#: ports/nrf/common-hal/busio/UART.c:76 ports/nrf/common-hal/busio/UART.c:81
-#: ports/nrf/common-hal/busio/UART.c:88
+#: ports/nrf/common-hal/busio/UART.c:86
 msgid "busio.UART not yet implemented"
 msgstr "busio.UART pas encore implémenté"
 
@@ -2051,6 +2051,75 @@ msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'"
 msgid "Unsupported pull value."
 msgstr "Valeur de 'pull' non supportée"
 
+#: shared-bindings/displayio/Bitmap.c:84
+#, fuzzy
+msgid "y should be an int"
+msgstr "La longueur doit être entière"
+
+#: shared-bindings/displayio/Bitmap.c:89
+#, fuzzy
+msgid "row buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+"le tampon de sample_source doit être un bytearray ou un tableau de type "
+"'h','H', 'b' ou 'B'"
+
+#: shared-bindings/displayio/Bitmap.c:94
+#, fuzzy
+msgid "row data must be a buffer"
+msgstr "les constantes doivent être des entiers"
+
+#: shared-bindings/displayio/FourWire.c:55
+#: shared-bindings/displayio/FourWire.c:64
+msgid "displayio is a work in progress"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c:65
+#, fuzzy
+msgid "Group must have size at least 1"
+msgstr "Le tampon doit être de longueur au moins 1"
+
+#: shared-bindings/displayio/Palette.c:96
+#, fuzzy
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+"le tampon de sample_source doit être un bytearray ou un tableau de type "
+"'h','H', 'b' ou 'B'"
+
+#: shared-bindings/displayio/Palette.c:102
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:106
+#, fuzzy
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr "Les octets 'bytes' doivent être entre 0 et 255"
+
+#: shared-bindings/displayio/Palette.c:110
+#, fuzzy
+msgid "color buffer must be a buffer or int"
+msgstr "le tampon doit être un objet bytes-like"
+
+#: shared-bindings/displayio/Palette.c:123
+#: shared-bindings/displayio/Palette.c:137
+#, fuzzy
+msgid "palette_index should be an int"
+msgstr "Les valeurs du tableau doivent être des octets simples 'bytes'"
+
+#: shared-bindings/displayio/Sprite.c:45
+#, fuzzy
+msgid "position must be 2-tuple"
+msgstr "stop doit être 1 ou 2"
+
+#: shared-bindings/displayio/Sprite.c:87
+#, fuzzy
+msgid "unsupported bitmap type"
+msgstr "Débit non supporté"
+
+#: shared-bindings/displayio/Sprite.c:152
+#, fuzzy
+msgid "palette must be displayio.Palette"
+msgstr "la palette doit être longue de 32 octets"
+
 #: shared-bindings/gamepad/GamePad.c:100
 msgid "too many arguments"
 msgstr "trop d'arguments"
@@ -2272,6 +2341,18 @@ msgstr "Impossible de lire sans broche MISO."
 msgid "Cannot transfer without MOSI and MISO pins."
 msgstr "Pas de transfert sans broches MOSI et MISO"
 
+#: shared-module/displayio/Bitmap.c:49
+msgid "Only bit maps of 8 bit color or less are supported"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:69
+msgid "row must be packed and word aligned"
+msgstr ""
+
+#: shared-module/displayio/Group.c:39
+msgid "Group full"
+msgstr ""
+
 #: shared-module/struct/__init__.c:39
 msgid "'S' and 'O' are not supported format types"
 msgstr "'S' et 'O' ne sont pas des types de format supportés"
@@ -2279,3 +2360,7 @@ msgstr "'S' et 'O' ne sont pas des types de format supportés"
 #: shared-module/struct/__init__.c:83
 msgid "too many arguments provided with the given format"
 msgstr "trop d'arguments fournis avec ce format"
+
+#, fuzzy
+#~ msgid "value_size must be power of two"
+#~ msgstr "'len' doit être un multiple de 4"

ports/atmel-samd/Makefile

@@ -308,6 +308,7 @@ SRC_COMMON_HAL = \
 	busio/UART.c \
 	digitalio/__init__.c \
 	digitalio/DigitalInOut.c \
+	displayio/FourWire.c \
 	i2cslave/__init__.c \
 	i2cslave/I2CSlave.c \
 	microcontroller/__init__.c \
@@ -381,6 +382,11 @@ SRC_SHARED_MODULE = \
 	bitbangio/OneWire.c \
 	bitbangio/SPI.c \
 	busio/OneWire.c \
+	displayio/__init__.c \
+	displayio/Bitmap.c \
+	displayio/Group.c \
+	displayio/Palette.c \
+	displayio/Sprite.c \
 	gamepad/__init__.c \
 	gamepad/GamePad.c \
 	_stage/__init__.c \

ports/atmel-samd/background.c

@@ -30,12 +30,17 @@
 #include "usb.h"
 #include "usb_mass_storage.h"
 
+#include "shared-module/displayio/__init__.h"
+
 volatile uint64_t last_finished_tick = 0;
 
 void run_background_tasks(void) {
     #if (defined(SAMD21) && defined(PIN_PA02)) || defined(SAMD51)
     audio_dma_background();
     #endif
+    #ifdef CIRCUITPY_DISPLAYIO
+    displayio_refresh_display();
+    #endif
     usb_msc_background();
     usb_cdc_background();
     last_finished_tick = ticks_ms;

ports/atmel-samd/boards/board.h

@@ -31,6 +31,14 @@
 
 #include <stdbool.h>
 
+#include "py/mpconfig.h"
+
+#ifdef CIRCUITPY_DISPLAYIO
+#include "common-hal/displayio/FourWire.h"
+
+extern displayio_fourwire_obj_t board_display_obj;
+#endif
+
 // Initializes board related state once on start up.
 void board_init(void);
 

ports/atmel-samd/boards/hallowing_m0_express/board.c

@@ -26,8 +26,89 @@
 
 #include "boards/board.h"
 
-void board_init(void)
+#include "shared-bindings/displayio/FourWire.h"
-{
+#include "shared-module/displayio/mipi_constants.h"
+
+#include "tick.h"
+
+displayio_fourwire_obj_t board_display_obj;
+
+#define DELAY 0x80
+
+uint8_t display_init_sequence[] = {
+    0x01, 0 | DELAY, 150, // SWRESET
+    0x11, 0 | DELAY, 255, // SLPOUT
+    0xb1, 3, 0x01, 0x2C, 0x2D, // _FRMCTR1
+    0xb2, 3, 0x01, 0x2C, 0x2D, //
+    0xb3, 6, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
+    0xb4, 1, 0x07, // _INVCTR line inversion
+    0xc0, 3, 0xa2, 0x02, 0x84, // _PWCTR1 GVDD = 4.7V, 1.0uA
+    0xc1, 1, 0xc5, // _PWCTR2 VGH=14.7V, VGL=-7.35V
+    0xc2, 2, 0x0a, 0x00, // _PWCTR3 Opamp current small, Boost frequency
+    0xc3, 2, 0x8a, 0x2a,
+    0xc4, 2, 0x8a, 0xee,
+    0xc5, 1, 0x0e, // _VMCTR1 VCOMH = 4V, VOML = -1.1V
+    0x2a, 0, // _INVOFF
+    0x36, 1, 0x18, // _MADCTL bottom to top refresh
+    // 1 clk cycle nonoverlap, 2 cycle gate rise, 3 sycle osc equalie,
+    // fix on VTL
+    0x3a, 1, 0x05, // COLMOD - 16bit color
+    0xe0, 16, 0x02, 0x1c, 0x07, 0x12, // _GMCTRP1 Gamma
+              0x37, 0x32, 0x29, 0x2d,
+              0x29, 0x25, 0x2B, 0x39,
+              0x00, 0x01, 0x03, 0x10,
+    0xe1, 16, 0x03, 0x1d, 0x07, 0x06, // _GMCTRN1
+              0x2E, 0x2C, 0x29, 0x2D,
+              0x2E, 0x2E, 0x37, 0x3F,
+              0x00, 0x00, 0x02, 0x10,
+    0x2a, 3, 0x02, 0x00, 0x81, // _CASET XSTART = 2, XEND = 129
+    0x2b, 3, 0x02, 0x00, 0x81, // _RASET XSTART = 2, XEND = 129
+    0x13, 0 | DELAY, 10, // _NORON
+    0x29, 0 | DELAY, 100, // _DISPON
+};
+
+void board_init(void) {
+    board_display_obj.base.type = &displayio_fourwire_type;
+    common_hal_displayio_fourwire_construct(&board_display_obj,
+        &pin_PB23, // Clock
+        &pin_PB22, // Data
+        &pin_PA28, // Command or data
+        &pin_PA01, // Chip select
+        &pin_PA27, // Reset
+        128, // Width
+        128, // Height
+        2, // column start
+        0, // row start
+        16, // Color depth
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
+        MIPI_COMMAND_WRITE_MEMORY_START); // Write memory command
+
+    uint32_t i = 0;
+    common_hal_displayio_fourwire_begin_transaction(&board_display_obj);
+    while (i < sizeof(display_init_sequence)) {
+        uint8_t *cmd = display_init_sequence + i;
+        uint8_t data_size = *(cmd + 1);
+        bool delay = (data_size & DELAY) != 0;
+        data_size &= ~DELAY;
+        uint8_t *data = cmd + 2;
+        common_hal_displayio_fourwire_send(&board_display_obj, true, cmd, 1);
+        common_hal_displayio_fourwire_send(&board_display_obj, false, data, data_size);
+        if (delay) {
+            data_size++;
+            uint16_t delay_length_ms = *(cmd + 1 + data_size);
+            if (delay_length_ms == 255) {
+                delay_length_ms = 500;
+            }
+            uint64_t start = ticks_ms;
+            while (ticks_ms - start < delay_length_ms) {}
+        } else {
+            uint64_t start = ticks_ms;
+            while (ticks_ms - start < 10) {}
+        }
+        i += 2 + data_size;
+    }
+    common_hal_displayio_fourwire_end_transaction(&board_display_obj);
 }
 
 bool board_requests_safe_mode(void) {
@@ -35,4 +116,5 @@ bool board_requests_safe_mode(void) {
 }
 
 void reset_board(void) {
+    common_hal_displayio_fourwire_show(&board_display_obj, NULL);
 }

ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.h

@@ -3,7 +3,7 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_PA12)
 
-// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz.
+// Clock rates are off: Saleae reads 12MHz which is the limit even though we set it to the safer 8MHz.
 #define SPI_FLASH_BAUDRATE  (8000000)
 
 #define SPI_FLASH_MOSI_PIN          PIN_PB10
@@ -27,8 +27,8 @@
 #define SPI_FLASH_DIPO              1   // same as MISO pad
 
 // These are pins not to reset.
-#define MICROPY_PORT_A        (PORT_PA07 | PORT_PA12 | PORT_PA13 | PORT_PA24 | PORT_PA25)
+#define MICROPY_PORT_A        ( PORT_PA01 | PORT_PA07 | PORT_PA12 | PORT_PA13 | PORT_PA24 | PORT_PA25 | PORT_PA27 | PORT_PA28)
-#define MICROPY_PORT_B        ( PORT_PB10 | PORT_PB11 )
+#define MICROPY_PORT_B        ( PORT_PB10 | PORT_PB11 | PORT_PB22 | PORT_PB23 )
 #define MICROPY_PORT_C        ( 0 )
 
 #include "external_flash/external_flash.h"
@@ -61,3 +61,5 @@
 // USB is always used internally so skip the pin objects for it.
 #define IGNORE_PIN_PA24     1
 #define IGNORE_PIN_PA25     1
+
+#define CIRCUITPY_DISPLAYIO

ports/atmel-samd/boards/hallowing_m0_express/pins.c

@@ -1,5 +1,6 @@
 #include "shared-bindings/board/__init__.h"
 
+#include "boards/board.h"
 #include "board_busses.h"
 
 STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
@@ -56,5 +57,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
     { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
     { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&board_display_obj)}
 };
 MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/atmel-samd/common-hal/displayio/FourWire.c

@@ -0,0 +1,139 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/FourWire.h"
+
+#include <stdint.h>
+
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/digitalio/DigitalInOut.h"
+
+#include "tick.h"
+
+void common_hal_displayio_fourwire_construct(displayio_fourwire_obj_t* self,
+    const mcu_pin_obj_t* clock, const mcu_pin_obj_t* data, const mcu_pin_obj_t* command,
+    const mcu_pin_obj_t* chip_select, const mcu_pin_obj_t* reset, uint16_t width,
+    uint16_t height, int16_t colstart, int16_t rowstart, uint16_t color_depth,
+    uint8_t set_column_command, uint8_t set_row_command, uint8_t write_ram_command) {
+
+    common_hal_busio_spi_construct(&self->bus, clock, data, mp_const_none);
+    common_hal_digitalio_digitalinout_construct(&self->command, command);
+    common_hal_digitalio_digitalinout_switch_to_output(&self->command, true, DRIVE_MODE_PUSH_PULL);
+    common_hal_digitalio_digitalinout_construct(&self->chip_select, chip_select);
+    common_hal_digitalio_digitalinout_switch_to_output(&self->chip_select, true, DRIVE_MODE_PUSH_PULL);
+
+    common_hal_digitalio_digitalinout_construct(&self->reset, reset);
+    common_hal_digitalio_digitalinout_switch_to_output(&self->reset, true, DRIVE_MODE_PUSH_PULL);
+
+    self->width = width;
+    self->height = height;
+    self->color_depth = color_depth;
+    self->set_column_command = set_column_command;
+    self->set_row_command = set_row_command;
+    self->write_ram_command = write_ram_command;
+    self->current_group = NULL;
+    self->colstart = colstart;
+    self->rowstart = rowstart;
+}
+
+bool common_hal_displayio_fourwire_begin_transaction(displayio_fourwire_obj_t* self) {
+    if (!common_hal_busio_spi_try_lock(&self->bus)) {
+        return false;
+    }
+    // TODO(tannewt): Stop hardcoding SPI frequency, polarity and phase.
+    common_hal_busio_spi_configure(&self->bus, 12000000, 0, 0, 8);
+    common_hal_digitalio_digitalinout_set_value(&self->chip_select, false);
+    return true;
+}
+
+void common_hal_displayio_fourwire_send(displayio_fourwire_obj_t* self, bool command, uint8_t *data, uint32_t data_length) {
+    common_hal_digitalio_digitalinout_set_value(&self->command, !command);
+    common_hal_busio_spi_write(&self->bus, data, data_length);
+}
+
+void common_hal_displayio_fourwire_end_transaction(displayio_fourwire_obj_t* self) {
+    common_hal_digitalio_digitalinout_set_value(&self->chip_select, true);
+    common_hal_busio_spi_unlock(&self->bus);
+}
+
+void common_hal_displayio_fourwire_show(displayio_fourwire_obj_t* self, displayio_group_t* root_group) {
+    self->current_group = root_group;
+    common_hal_displayio_fourwire_refresh_soon(self);
+}
+
+void common_hal_displayio_fourwire_refresh_soon(displayio_fourwire_obj_t* self) {
+    self->refresh = true;
+}
+
+int32_t common_hal_displayio_fourwire_wait_for_frame(displayio_fourwire_obj_t* self) {
+    uint64_t last_refresh = self->last_refresh;
+    while (last_refresh == self->last_refresh) {
+        MICROPY_VM_HOOK_LOOP
+    }
+    return 0;
+}
+
+void displayio_fourwire_start_region_update(displayio_fourwire_obj_t* self, uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
+    // TODO(tannewt): Handle displays with single byte bounds.
+    common_hal_displayio_fourwire_begin_transaction(self);
+    uint16_t data[2];
+    common_hal_displayio_fourwire_send(self, true, &self->set_column_command, 1);
+    data[0] = __builtin_bswap16(x0 + self->colstart);
+    data[1] = __builtin_bswap16(x1-1 + self->colstart);
+    common_hal_displayio_fourwire_send(self, false, (uint8_t*) data, 4);
+    common_hal_displayio_fourwire_send(self, true, &self->set_row_command, 1);
+    data[0] = __builtin_bswap16(y0 + 1 + self->rowstart);
+    data[1] = __builtin_bswap16(y1 + self->rowstart);
+    common_hal_displayio_fourwire_send(self, false, (uint8_t*) data, 4);
+    common_hal_displayio_fourwire_send(self, true, &self->write_ram_command, 1);
+}
+
+bool displayio_fourwire_send_pixels(displayio_fourwire_obj_t* self, uint32_t* pixels, uint32_t length) {
+    // TODO: Set this up so its async and 32 bit DMA transfers.
+    common_hal_displayio_fourwire_send(self, false, (uint8_t*) pixels, length*4);
+    return true;
+}
+
+void displayio_fourwire_finish_region_update(displayio_fourwire_obj_t* self) {
+    common_hal_displayio_fourwire_end_transaction(self);
+}
+
+bool displayio_fourwire_frame_queued(displayio_fourwire_obj_t* self) {
+    // Refresh at ~30 fps.
+    return (ticks_ms - self->last_refresh) > 32;
+}
+
+bool displayio_fourwire_refresh_queued(displayio_fourwire_obj_t* self) {
+    return self->refresh || (self->current_group != NULL && displayio_group_needs_refresh(self->current_group));
+}
+
+void displayio_fourwire_finish_refresh(displayio_fourwire_obj_t* self) {
+    if (self->current_group != NULL) {
+        displayio_group_finish_refresh(self->current_group);
+    }
+    self->refresh = false;
+    self->last_refresh = ticks_ms;
+}

ports/atmel-samd/common-hal/displayio/FourWire.h

@@ -0,0 +1,53 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_DISPLAYIO_FOURWIRE_H
+#define MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_DISPLAYIO_FOURWIRE_H
+
+#include "common-hal/busio/SPI.h"
+#include "common-hal/digitalio/DigitalInOut.h"
+#include "shared-module/displayio/Group.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    busio_spi_obj_t bus;
+    digitalio_digitalinout_obj_t command;
+    digitalio_digitalinout_obj_t chip_select;
+    digitalio_digitalinout_obj_t reset;
+    uint16_t width;
+    uint16_t height;
+    uint16_t color_depth;
+    uint8_t set_column_command;
+    uint8_t set_row_command;
+    uint8_t write_ram_command;
+    displayio_group_t *current_group;
+    bool refresh;
+    uint64_t last_refresh;
+    int16_t colstart;
+    int16_t rowstart;
+} displayio_fourwire_obj_t;
+
+#endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_DISPLAYIO_FOURWIRE_H

ports/atmel-samd/mpconfigport.h

@@ -171,6 +171,7 @@ extern const struct _mp_obj_module_t audioio_module;
 extern const struct _mp_obj_module_t audiobusio_module;
 extern const struct _mp_obj_module_t analogio_module;
 extern const struct _mp_obj_module_t digitalio_module;
+extern const struct _mp_obj_module_t displayio_module;
 extern const struct _mp_obj_module_t pulseio_module;
 extern const struct _mp_obj_module_t busio_module;
 extern const struct _mp_obj_module_t board_module;
@@ -232,11 +233,18 @@ extern const struct _mp_obj_module_t usb_hid_module;
         #define I2CSLAVE_MODULE
     #endif
 
+    #ifdef CIRCUITPY_DISPLAYIO
+        #define DISPLAYIO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_displayio), (mp_obj_t)&displayio_module },
+    #else
+        #define DISPLAYIO_MODULE
+    #endif
+
     #ifndef EXTRA_BUILTIN_MODULES
     #define EXTRA_BUILTIN_MODULES \
         AUDIOIO_MODULE \
         AUDIOBUSIO_MODULE \
         { MP_OBJ_NEW_QSTR(MP_QSTR_bitbangio), (mp_obj_t)&bitbangio_module }, \
+        DISPLAYIO_MODULE \
         I2CSLAVE_MODULE \
         { MP_OBJ_NEW_QSTR(MP_QSTR_rotaryio), (mp_obj_t)&rotaryio_module }, \
         { MP_OBJ_NEW_QSTR(MP_QSTR_gamepad),(mp_obj_t)&gamepad_module }

ports/atmel-samd/supervisor/port.c

@@ -186,8 +186,6 @@ safe_mode_t port_init(void) {
 #endif
     clock_init();
 
-    board_init();
-
     // Configure millisecond timer initialization.
     tick_init();
 
@@ -196,6 +194,10 @@ safe_mode_t port_init(void) {
 #endif
 
     init_shared_dma();
+
+    // Init the board last so everything else is ready
+    board_init();
+
     #ifdef CIRCUITPY_CANARY_WORD
     // Run in safe mode if the canary is corrupt.
     if (_ezero != CIRCUITPY_CANARY_WORD) {
@@ -234,6 +236,12 @@ void reset_port(void) {
         if (sercom_instances[i] == MICROPY_HW_APA102_SERCOM) {
             continue;
         }
+#endif
+#ifdef CIRCUITPY_DISPLAYIO
+        // TODO(tannewt): Make this dynamic.
+        if (sercom_instances[i] == board_display_obj.bus.spi_desc.dev.prvt) {
+            continue;
+        }
 #endif
         // SWRST is same for all modes of SERCOMs.
         sercom_instances[i]->SPI.CTRLA.bit.SWRST = 1;

shared-bindings/displayio/Bitmap.c

@@ -0,0 +1,112 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Bitmap.h"
+
+#include <stdint.h>
+
+#include "lib/utils/context_manager_helpers.h"
+#include "py/binary.h"
+#include "py/objproperty.h"
+#include "py/runtime.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-bindings/util.h"
+#include "supervisor/shared/translate.h"
+
+//| .. currentmodule:: displayio
+//|
+//| :class:`Bitmap` -- Stores values in a 2D array
+//| ==========================================================================
+//|
+//| Stores values of a certain size in a 2D array
+//|
+//| .. warning:: This will likely be changed before 4.0.0. Consider it very experimental.
+//|
+//| .. class:: Bitmap(width, height, value_count)
+//|
+//|   Create a Bitmap object with the given fixed size. Each pixel stores a value that is used to
+//|   index into a corresponding palette. This enables differently colored sprites to share the
+//|   underlying Bitmap. value_count is used to minimize the memory used to store the Bitmap.
+//|
+//|   :param int width: The number of values wide
+//|   :param int height: The number of values high
+//|   :param int value_count: The number of possible pixel values.
+//|
+STATIC mp_obj_t displayio_bitmap_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *pos_args) {
+    mp_arg_check_num(n_args, n_kw, 3, 3, false);
+    uint32_t width = mp_obj_get_int(pos_args[0]);
+    uint32_t height = mp_obj_get_int(pos_args[1]);
+    uint32_t value_count = mp_obj_get_int(pos_args[2]);
+    uint32_t power_of_two = 1;
+    while (value_count > (1U << power_of_two)) {
+        power_of_two <<= 1;
+    }
+
+    displayio_bitmap_t *self = m_new_obj(displayio_bitmap_t);
+    self->base.type = &displayio_bitmap_type;
+    common_hal_displayio_bitmap_construct(self, width, height, power_of_two);
+
+    return MP_OBJ_FROM_PTR(self);
+}
+
+
+//|   .. method:: _load_row(y, data)
+//|
+//|     Loads pre-packed data into the given row.
+//|
+STATIC mp_obj_t displayio_bitmap_obj__load_row(mp_obj_t self_in, mp_obj_t y_in, mp_obj_t data_in) {
+    displayio_bitmap_t *self = MP_OBJ_TO_PTR(self_in);
+    mp_int_t y;
+    if (!mp_obj_get_int_maybe(y_in, &y)) {
+        mp_raise_ValueError(translate("y should be an int"));
+    }
+    mp_buffer_info_t bufinfo;
+    if (mp_get_buffer(data_in, &bufinfo, MP_BUFFER_READ)) {
+        if (bufinfo.typecode != 'b' && bufinfo.typecode != 'B' && bufinfo.typecode != BYTEARRAY_TYPECODE) {
+            mp_raise_ValueError(translate("row buffer must be a bytearray or array of type 'b' or 'B'"));
+        }
+        uint8_t* buf = bufinfo.buf;
+        common_hal_displayio_bitmap_load_row(self, y, buf, bufinfo.len);
+    } else {
+        mp_raise_TypeError(translate("row data must be a buffer"));
+    }
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_3(displayio_bitmap__load_row_obj, displayio_bitmap_obj__load_row);
+
+STATIC const mp_rom_map_elem_t displayio_bitmap_locals_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR__load_row), MP_ROM_PTR(&displayio_bitmap__load_row_obj) },
+};
+STATIC MP_DEFINE_CONST_DICT(displayio_bitmap_locals_dict, displayio_bitmap_locals_dict_table);
+
+const mp_obj_type_t displayio_bitmap_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_Bitmap,
+    .make_new = displayio_bitmap_make_new,
+    // TODO(tannewt): Implement subscr after slices support start, stop and step tuples.
+    // .subscr = displayio_bitmap_subscr,
+    .locals_dict = (mp_obj_dict_t*)&displayio_bitmap_locals_dict,
+};

shared-bindings/displayio/Bitmap.h

@@ -0,0 +1,41 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_BITMAP_H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_BITMAP_H
+
+#include "shared-module/displayio/Bitmap.h"
+
+extern const mp_obj_type_t displayio_bitmap_type;
+
+void common_hal_displayio_bitmap_construct(displayio_bitmap_t *self, uint32_t width,
+    uint32_t height, uint32_t bits_per_value);
+
+void common_hal_displayio_bitmap_load_row(displayio_bitmap_t *self, uint16_t y, uint8_t* data,
+                                          uint16_t len);
+uint32_t common_hal_displayio_bitmap_get_pixel(displayio_bitmap_t *bitmap, int16_t x, int16_t y);
+
+#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_BITMAP_H

shared-bindings/displayio/FourWire.c

@@ -0,0 +1,118 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/FourWire.h"
+
+#include <stdint.h>
+
+#include "lib/utils/context_manager_helpers.h"
+#include "py/binary.h"
+#include "py/objproperty.h"
+#include "py/runtime.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-bindings/util.h"
+#include "supervisor/shared/translate.h"
+
+//| .. currentmodule:: displayio
+//|
+//| :class:`FourWire` -- Manage updating a display over SPI four wire protocol
+//| ==========================================================================
+//|
+//| Manage updating a display over SPI four wire protocol in the background while Python code runs.
+//| It doesn't handle display initialization.
+//|
+//| .. warning:: This will be changed before 4.0.0. Consider it very experimental.
+//|
+//| .. class:: FourWire(*, clock, data, command, chip_select, width, height, colstart, rowstart,
+//|                     color_depth, set_column_command, set_row_command, write_ram_command)
+//|
+//|   Create a FourWire object associated with the given pins.
+//|
+STATIC mp_obj_t displayio_fourwire_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *pos_args) {
+    mp_raise_NotImplementedError(translate("displayio is a work in progress"));
+    return mp_const_none;
+}
+
+
+//|   .. method:: send(command, data)
+//|
+//|
+STATIC mp_obj_t displayio_fourwire_obj_send(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
+    mp_raise_NotImplementedError(translate("displayio is a work in progress"));
+
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_KW(displayio_fourwire_send_obj, 1, displayio_fourwire_obj_send);
+
+//|   .. method:: show(group)
+//|
+//|     Switches do displaying the given group of elements.
+//|
+STATIC mp_obj_t displayio_fourwire_obj_show(mp_obj_t self_in, mp_obj_t group_in) {
+    displayio_fourwire_obj_t *self = MP_OBJ_TO_PTR(self_in);
+    displayio_group_t* group = MP_OBJ_TO_PTR(group_in);
+    common_hal_displayio_fourwire_show(self, group);
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_2(displayio_fourwire_show_obj, displayio_fourwire_obj_show);
+
+//|   .. method:: refresh_soon()
+//|
+//|     Queues up a display refresh that happens in the background.
+//|
+STATIC mp_obj_t displayio_fourwire_obj_refresh_soon(mp_obj_t self_in) {
+    displayio_fourwire_obj_t *self = MP_OBJ_TO_PTR(self_in);
+    common_hal_displayio_fourwire_refresh_soon(self);
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_1(displayio_fourwire_refresh_soon_obj, displayio_fourwire_obj_refresh_soon);
+
+//|   .. method:: wait_for_frame()
+//|
+//|     Waits until the next frame has been transmitted to the display unless the wait count is
+//|     behind the rendered frames. In that case, this will return immediately with the wait count.
+//|
+STATIC mp_obj_t displayio_fourwire_obj_wait_for_frame(mp_obj_t self_in) {
+    displayio_fourwire_obj_t *self = MP_OBJ_TO_PTR(self_in);
+    return MP_OBJ_NEW_SMALL_INT(common_hal_displayio_fourwire_wait_for_frame(self));
+}
+MP_DEFINE_CONST_FUN_OBJ_1(displayio_fourwire_wait_for_frame_obj, displayio_fourwire_obj_wait_for_frame);
+
+
+STATIC const mp_rom_map_elem_t displayio_fourwire_locals_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&displayio_fourwire_send_obj) },
+    { MP_ROM_QSTR(MP_QSTR_show), MP_ROM_PTR(&displayio_fourwire_show_obj) },
+    { MP_ROM_QSTR(MP_QSTR_refresh_soon), MP_ROM_PTR(&displayio_fourwire_refresh_soon_obj) },
+    { MP_ROM_QSTR(MP_QSTR_wait_for_frame), MP_ROM_PTR(&displayio_fourwire_wait_for_frame_obj) },
+};
+STATIC MP_DEFINE_CONST_DICT(displayio_fourwire_locals_dict, displayio_fourwire_locals_dict_table);
+
+const mp_obj_type_t displayio_fourwire_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_FourWire,
+    .make_new = displayio_fourwire_make_new,
+    .locals_dict = (mp_obj_dict_t*)&displayio_fourwire_locals_dict,
+};

shared-bindings/displayio/FourWire.h

@@ -0,0 +1,65 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017, 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYBUSIO_FOURWIRE_H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYBUSIO_FOURWIRE_H
+
+#include "common-hal/displayio/FourWire.h"
+#include "common-hal/microcontroller/Pin.h"
+
+#include "shared-module/displayio/Group.h"
+
+extern const mp_obj_type_t displayio_fourwire_type;
+
+// TODO(tannewt): Split this apart into FourWire and a Display object because the dimensions and
+// commands are also used for the parallel buses.
+void common_hal_displayio_fourwire_construct(displayio_fourwire_obj_t* self,
+    const mcu_pin_obj_t* clock, const mcu_pin_obj_t* data, const mcu_pin_obj_t* command,
+    const mcu_pin_obj_t* chip_select, const mcu_pin_obj_t* reset, uint16_t width, uint16_t height,
+    int16_t colstart, int16_t rowstart, uint16_t color_depth,
+    uint8_t set_column_command, uint8_t set_row_command, uint8_t write_ram_command);
+
+int32_t common_hal_displayio_fourwire_wait_for_frame(displayio_fourwire_obj_t* self);
+
+bool common_hal_displayio_fourwire_begin_transaction(displayio_fourwire_obj_t* self);
+
+void common_hal_displayio_fourwire_send(displayio_fourwire_obj_t* self, bool command, uint8_t *data, uint32_t data_length);
+
+void common_hal_displayio_fourwire_end_transaction(displayio_fourwire_obj_t* self);
+
+void common_hal_displayio_fourwire_show(displayio_fourwire_obj_t* self, displayio_group_t* root_group);
+
+void common_hal_displayio_fourwire_refresh_soon(displayio_fourwire_obj_t* self);
+
+void displayio_fourwire_start_region_update(displayio_fourwire_obj_t* self, uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
+void displayio_fourwire_finish_region_update(displayio_fourwire_obj_t* self);
+bool displayio_fourwire_frame_queued(displayio_fourwire_obj_t* self);
+
+bool displayio_fourwire_refresh_queued(displayio_fourwire_obj_t* self);
+void displayio_fourwire_finish_refresh(displayio_fourwire_obj_t* self);
+bool displayio_fourwire_send_pixels(displayio_fourwire_obj_t* self, uint32_t* pixels, uint32_t length);
+
+#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYBUSIO_FOURWIRE_H

shared-bindings/displayio/Group.c

@@ -0,0 +1,96 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Group.h"
+
+#include <stdint.h>
+
+#include "lib/utils/context_manager_helpers.h"
+#include "py/binary.h"
+#include "py/objproperty.h"
+#include "py/runtime.h"
+#include "supervisor/shared/translate.h"
+
+//| .. currentmodule:: displayio
+//|
+//| :class:`Group` -- Group together sprites and subgroups
+//| ==========================================================================
+//|
+//| Manage a group of sprites and groups and how they are inter-related.
+//|
+//| .. warning:: This will be changed before 4.0.0. Consider it very experimental.
+//|
+//| .. class:: Group(*, max_size=4)
+//|
+//|   Create a Group of a given size.
+//|
+//|   :param int max_size: The maximum group size.
+//|
+STATIC mp_obj_t displayio_group_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *pos_args) {
+    mp_arg_check_num(n_args, n_kw, 0, 0, true);
+    mp_map_t kw_args;
+    mp_map_init_fixed_table(&kw_args, n_kw, pos_args + n_args);
+    enum { ARG_max_size };
+    static const mp_arg_t allowed_args[] = {
+        { MP_QSTR_max_size, MP_ARG_INT | MP_ARG_KW_ONLY, {.u_int = 4} },
+    };
+    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
+    mp_arg_parse_all(n_args, pos_args, &kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+
+    mp_int_t max_size = args[ARG_max_size].u_int;
+    if (max_size < 1) {
+        mp_raise_ValueError(translate("Group must have size at least 1"));
+    }
+
+    displayio_group_t *self = m_new_obj(displayio_group_t);
+    self->base.type = &displayio_group_type;
+    common_hal_displayio_group_construct(self, max_size);
+
+    return MP_OBJ_FROM_PTR(self);
+}
+
+//|   .. method:: append(layer)
+//|
+//|     Append a layer to the group. It will be drawn above other layers.
+//|
+STATIC mp_obj_t displayio_group_obj_append(mp_obj_t self_in, mp_obj_t layer) {
+    displayio_group_t *self = MP_OBJ_TO_PTR(self_in);
+    common_hal_displayio_group_append(self, layer);
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_2(displayio_group_append_obj, displayio_group_obj_append);
+
+STATIC const mp_rom_map_elem_t displayio_group_locals_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_append), MP_ROM_PTR(&displayio_group_append_obj) },
+};
+STATIC MP_DEFINE_CONST_DICT(displayio_group_locals_dict, displayio_group_locals_dict_table);
+
+const mp_obj_type_t displayio_group_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_Group,
+    .make_new = displayio_group_make_new,
+    .locals_dict = (mp_obj_dict_t*)&displayio_group_locals_dict,
+};

shared-bindings/displayio/Group.h

@@ -0,0 +1,38 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_GROUP_H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_GROUP_H
+
+#include "shared-module/displayio/Group.h"
+
+extern const mp_obj_type_t displayio_group_type;
+
+
+void common_hal_displayio_group_construct(displayio_group_t* self, uint32_t max_size);
+void common_hal_displayio_group_append(displayio_group_t* self, mp_obj_t layer);
+
+#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_GROUP_H

shared-bindings/displayio/Palette.c

@@ -0,0 +1,156 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Palette.h"
+
+#include <stdint.h>
+
+#include "lib/utils/context_manager_helpers.h"
+#include "py/binary.h"
+#include "py/objproperty.h"
+#include "py/runtime.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-bindings/util.h"
+#include "supervisor/shared/translate.h"
+
+//| .. currentmodule:: displayio
+//|
+//| :class:`Palette` -- Stores a mapping from bitmap pixel palette_indexes to display colors
+//| =========================================================================================
+//|
+//| Map a pixel palette_index to a full color. Colors are transformed to the display's format internally to
+//| save memory.
+//|
+//| .. warning:: This will be changed before 4.0.0. Consider it very experimental.
+//|
+//| .. class:: Palette(color_count)
+//|
+//|   Create a Palette object to store a set number of colors.
+//|
+//|   :param int color_count: The number of colors in the Palette
+// TODO(tannewt): Add support for other color formats.
+// TODO(tannewt): Add support for 8-bit alpha blending.
+//|
+STATIC mp_obj_t displayio_palette_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *pos_args) {
+    mp_arg_check_num(n_args, n_kw, 1, 1, true);
+    mp_map_t kw_args;
+    mp_map_init_fixed_table(&kw_args, n_kw, pos_args + n_args);
+    enum { ARG_color_count };
+    static const mp_arg_t allowed_args[] = {
+        { MP_QSTR_color_count, MP_ARG_INT | MP_ARG_REQUIRED },
+    };
+    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
+    mp_arg_parse_all(n_args, pos_args, &kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+
+    displayio_palette_t *self = m_new_obj(displayio_palette_t);
+    self->base.type = &displayio_palette_type;
+    common_hal_displayio_palette_construct(self, args[ARG_color_count].u_int);
+
+    return MP_OBJ_FROM_PTR(self);
+}
+
+STATIC mp_obj_t palette_subscr(mp_obj_t self_in, mp_obj_t index_in, mp_obj_t value) {
+    if (value == MP_OBJ_NULL) {
+        // delete item
+        return MP_OBJ_NULL; // op not supported
+    }
+    // Slicing not supported. Use a duplicate Palette to swap multiple colors atomically.
+    if (MP_OBJ_IS_TYPE(index_in, &mp_type_slice)) {
+        return MP_OBJ_NULL;
+    }
+    // index read is not supported
+    if (value == MP_OBJ_SENTINEL) {
+        return MP_OBJ_NULL;
+    }
+    displayio_palette_t *self = MP_OBJ_TO_PTR(self_in);
+    size_t index = mp_get_index(&displayio_palette_type, self->color_count, index_in, false);
+
+    uint32_t color;
+    mp_int_t int_value;
+    mp_buffer_info_t bufinfo;
+    if (mp_get_buffer(value, &bufinfo, MP_BUFFER_READ)) {
+        if (bufinfo.typecode != 'b' && bufinfo.typecode != 'B' && bufinfo.typecode != BYTEARRAY_TYPECODE) {
+            mp_raise_ValueError(translate("color buffer must be a bytearray or array of type 'b' or 'B'"));
+        }
+        uint8_t* buf = bufinfo.buf;
+        if (bufinfo.len == 3 || bufinfo.len == 4) {
+            color = buf[0] << 16 | buf[1] << 8 | buf[2];
+        } else {
+            mp_raise_ValueError(translate("color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"));
+        }
+    } else if (mp_obj_get_int_maybe(value, &int_value)) {
+        if (int_value < 0 || int_value > 0xffffff) {
+            mp_raise_TypeError(translate("color must be between 0x000000 and 0xffffff"));
+        }
+        color = int_value;
+    } else {
+        mp_raise_TypeError(translate("color buffer must be a buffer or int"));
+    }
+    common_hal_displayio_palette_set_color(self, index, color);
+    return mp_const_none;
+}
+
+//|   .. method:: make_transparent(palette_index)
+//|
+STATIC mp_obj_t displayio_palette_obj_make_transparent(mp_obj_t self_in, mp_obj_t palette_index_obj) {
+    displayio_palette_t *self = MP_OBJ_TO_PTR(self_in);
+
+    mp_int_t palette_index;
+    if (!mp_obj_get_int_maybe(palette_index_obj, &palette_index)) {
+        mp_raise_ValueError(translate("palette_index should be an int"));
+    }
+    common_hal_displayio_palette_make_transparent(self, palette_index);
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_2(displayio_palette_make_transparent_obj, displayio_palette_obj_make_transparent);
+
+//|   .. method:: make_opaque(palette_index)
+//|
+STATIC mp_obj_t displayio_palette_obj_make_opaque(mp_obj_t self_in, mp_obj_t palette_index_obj) {
+    displayio_palette_t *self = MP_OBJ_TO_PTR(self_in);
+
+    mp_int_t palette_index;
+    if (!mp_obj_get_int_maybe(palette_index_obj, &palette_index)) {
+        mp_raise_ValueError(translate("palette_index should be an int"));
+    }
+    common_hal_displayio_palette_make_opaque(self, palette_index);
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_2(displayio_palette_make_opaque_obj, displayio_palette_obj_make_opaque);
+
+STATIC const mp_rom_map_elem_t displayio_palette_locals_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_make_transparent), MP_ROM_PTR(&displayio_palette_make_transparent_obj) },
+    { MP_ROM_QSTR(MP_QSTR_make_opaque), MP_ROM_PTR(&displayio_palette_make_opaque_obj) },
+};
+STATIC MP_DEFINE_CONST_DICT(displayio_palette_locals_dict, displayio_palette_locals_dict_table);
+
+const mp_obj_type_t displayio_palette_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_Palette,
+    .make_new = displayio_palette_make_new,
+    .subscr = palette_subscr,
+    .locals_dict = (mp_obj_dict_t*)&displayio_palette_locals_dict,
+};

shared-bindings/displayio/Palette.h

@@ -0,0 +1,40 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_PALETTE_H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_PALETTE_H
+
+#include "shared-module/displayio/Palette.h"
+
+extern const mp_obj_type_t displayio_palette_type;
+
+void common_hal_displayio_palette_construct(displayio_palette_t* self, uint16_t color_count);
+void common_hal_displayio_palette_set_color(displayio_palette_t* self, uint32_t palette_index, uint32_t color);
+
+void common_hal_displayio_palette_make_opaque(displayio_palette_t* self, uint32_t palette_index);
+void common_hal_displayio_palette_make_transparent(displayio_palette_t* self, uint32_t palette_index);
+
+#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_PALETTE_H

shared-bindings/displayio/Sprite.c

@@ -0,0 +1,181 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Sprite.h"
+
+#include <stdint.h>
+
+#include "lib/utils/context_manager_helpers.h"
+#include "py/binary.h"
+#include "py/objproperty.h"
+#include "py/runtime.h"
+#include "shared-bindings/displayio/Bitmap.h"
+#include "supervisor/shared/translate.h"
+
+void unpack_position(mp_obj_t position_obj, int16_t* x, int16_t* y) {
+    // TODO(tannewt): Support any value sequence such as bytearray or bytes.
+    mp_obj_tuple_t *position = MP_OBJ_TO_PTR(position_obj);
+    if (MP_OBJ_IS_TYPE(position_obj, &mp_type_tuple) && position->len == 2) {
+        *x = mp_obj_get_int(position->items[0]);
+        *y = mp_obj_get_int(position->items[1]);
+    } else if (position != mp_const_none) {
+        mp_raise_TypeError(translate("position must be 2-tuple"));
+    }
+}
+
+//| .. currentmodule:: displayio
+//|
+//| :class:`Sprite` -- A particular copy of an image to display
+//| ==========================================================================
+//|
+//| Position a particular image and palette combination.
+//|
+//| .. warning:: This will be changed before 4.0.0. Consider it very experimental.
+//|
+//| .. class:: Sprite(bitmap, *, palette, position, width, height)
+//|
+//|   Create a Sprite object
+//|
+//|
+STATIC mp_obj_t displayio_sprite_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *pos_args) {
+    mp_arg_check_num(n_args, n_kw, 1, 4, true);
+    mp_map_t kw_args;
+    mp_map_init_fixed_table(&kw_args, n_kw, pos_args + n_args);
+    enum { ARG_bitmap, ARG_palette, ARG_position, ARG_width, ARG_height };
+    static const mp_arg_t allowed_args[] = {
+        { MP_QSTR_bitmap, MP_ARG_OBJ | MP_ARG_REQUIRED },
+        { MP_QSTR_palette, MP_ARG_OBJ | MP_ARG_KW_ONLY },
+        { MP_QSTR_position, MP_ARG_OBJ | MP_ARG_KW_ONLY },
+        { MP_QSTR_width, MP_ARG_INT | MP_ARG_KW_ONLY, {.u_int = -1} },
+        { MP_QSTR_height, MP_ARG_INT | MP_ARG_KW_ONLY, {.u_int = -1} },
+    };
+    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
+    mp_arg_parse_all(n_args, pos_args, &kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+
+    mp_obj_t bitmap = args[ARG_bitmap].u_obj;
+
+    uint16_t width;
+    uint16_t height;
+    if (MP_OBJ_IS_TYPE(bitmap, &displayio_bitmap_type)) {
+        displayio_bitmap_t* bmp = MP_OBJ_TO_PTR(bitmap);
+        width = bmp->width;
+        height = bmp->height;
+    } else {
+        mp_raise_TypeError(translate("unsupported bitmap type"));
+    }
+    int16_t x = 0;
+    int16_t y = 0;
+    mp_obj_t position_obj = args[ARG_position].u_obj;
+    unpack_position(position_obj, &x, &y);
+
+    displayio_sprite_t *self = m_new_obj(displayio_sprite_t);
+    self->base.type = &displayio_sprite_type;
+    common_hal_displayio_sprite_construct(self, bitmap, args[ARG_palette].u_obj,
+            width, height, x, y);
+    return MP_OBJ_FROM_PTR(self);
+}
+
+//|   .. attribute:: position
+//|
+//|     The position of the top-left corner of the sprite.
+//|
+STATIC mp_obj_t displayio_sprite_obj_get_position(mp_obj_t self_in) {
+    displayio_sprite_t *self = MP_OBJ_TO_PTR(self_in);
+    int16_t x;
+    int16_t y;
+    common_hal_displayio_sprite_get_position(self, &x, &y);
+
+    mp_obj_t coords[2];
+    coords[0] = mp_obj_new_int(x);
+    coords[1] = mp_obj_new_int(y);
+
+    return mp_obj_new_tuple(2, coords);
+}
+MP_DEFINE_CONST_FUN_OBJ_1(displayio_sprite_get_position_obj, displayio_sprite_obj_get_position);
+
+STATIC mp_obj_t displayio_sprite_obj_set_position(mp_obj_t self_in, mp_obj_t value) {
+    displayio_sprite_t *self = MP_OBJ_TO_PTR(self_in);
+
+    int16_t x = 0;
+    int16_t y = 0;
+    unpack_position(value, &x, &y);
+
+    common_hal_displayio_sprite_set_position(self, x, y);
+
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_2(displayio_sprite_set_position_obj, displayio_sprite_obj_set_position);
+
+const mp_obj_property_t displayio_sprite_position_obj = {
+    .base.type = &mp_type_property,
+    .proxy = {(mp_obj_t)&displayio_sprite_get_position_obj,
+              (mp_obj_t)&displayio_sprite_set_position_obj,
+              (mp_obj_t)&mp_const_none_obj},
+};
+
+//|   .. attribute:: palette
+//|
+//|     The color palette of the sprite.
+//|
+STATIC mp_obj_t displayio_sprite_obj_get_palette(mp_obj_t self_in) {
+    displayio_sprite_t *self = MP_OBJ_TO_PTR(self_in);
+    return common_hal_displayio_sprite_get_palette(self);
+}
+MP_DEFINE_CONST_FUN_OBJ_1(displayio_sprite_get_palette_obj, displayio_sprite_obj_get_palette);
+
+STATIC mp_obj_t displayio_sprite_obj_set_palette(mp_obj_t self_in, mp_obj_t palette_in) {
+    displayio_sprite_t *self = MP_OBJ_TO_PTR(self_in);
+    if (!MP_OBJ_IS_TYPE(palette_in, &displayio_palette_type)) {
+        mp_raise_TypeError(translate("palette must be displayio.Palette"));
+    }
+    displayio_palette_t *palette = MP_OBJ_TO_PTR(palette_in);
+
+    common_hal_displayio_sprite_set_palette(self, palette);
+
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_2(displayio_sprite_set_palette_obj, displayio_sprite_obj_set_palette);
+
+const mp_obj_property_t displayio_sprite_palette_obj = {
+    .base.type = &mp_type_property,
+    .proxy = {(mp_obj_t)&displayio_sprite_get_palette_obj,
+              (mp_obj_t)&displayio_sprite_set_palette_obj,
+              (mp_obj_t)&mp_const_none_obj},
+};
+
+STATIC const mp_rom_map_elem_t displayio_sprite_locals_dict_table[] = {
+    // Properties
+    { MP_ROM_QSTR(MP_QSTR_position),          MP_ROM_PTR(&displayio_sprite_position_obj) },
+    { MP_ROM_QSTR(MP_QSTR_palette),          MP_ROM_PTR(&displayio_sprite_palette_obj) },
+};
+STATIC MP_DEFINE_CONST_DICT(displayio_sprite_locals_dict, displayio_sprite_locals_dict_table);
+
+const mp_obj_type_t displayio_sprite_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_Sprite,
+    .make_new = displayio_sprite_make_new,
+    .locals_dict = (mp_obj_dict_t*)&displayio_sprite_locals_dict,
+};

shared-bindings/displayio/Sprite.h

@@ -0,0 +1,43 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_SPRITE_H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_SPRITE_H
+
+#include "shared-module/displayio/Sprite.h"
+
+extern const mp_obj_type_t displayio_sprite_type;
+
+void common_hal_displayio_sprite_construct(displayio_sprite_t *self, mp_obj_t bitmap,
+        mp_obj_t palette, uint16_t width, uint16_t height, uint16_t x, uint16_t y);
+
+void common_hal_displayio_sprite_get_position(displayio_sprite_t *self, int16_t* x, int16_t* y);
+void common_hal_displayio_sprite_set_position(displayio_sprite_t *self, int16_t x, int16_t y);
+
+displayio_palette_t* common_hal_displayio_sprite_get_palette(displayio_sprite_t *self);
+void common_hal_displayio_sprite_set_palette(displayio_sprite_t *self, displayio_palette_t* palette);
+
+#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_SPRITE_H

shared-bindings/displayio/__init__.c

@@ -0,0 +1,83 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+
+#include "py/obj.h"
+#include "py/runtime.h"
+
+#include "shared-bindings/displayio/__init__.h"
+#include "shared-bindings/displayio/Bitmap.h"
+#include "shared-bindings/displayio/FourWire.h"
+#include "shared-bindings/displayio/Group.h"
+#include "shared-bindings/displayio/Palette.h"
+#include "shared-bindings/displayio/Sprite.h"
+
+//| :mod:`displayio` --- Native display driving
+//| =========================================================================
+//|
+//| .. module:: displayio
+//|   :synopsis: Native helpers for driving displays
+//|   :platform: SAMD21, SAMD51
+//|
+//| The `displayio` module contains classes to manage display output
+//| including synchronizing with refresh rates and partial updating. It does
+//| not include display initialization commands. It should live in a Python
+//| driver for use when a display is connected to a board. It should also be
+//| built into the board init when the board has the display on it.
+//|
+//| .. warning:: This will be changed before 4.0.0. Consider it very experimental.
+//|
+//| Libraries
+//|
+//| .. toctree::
+//|     :maxdepth: 3
+//|
+//|     Bitmap
+//|     FourWire
+//|     Group
+//|     Palette
+//|     Sprite
+//|
+//| All libraries change hardware state but are never deinit
+//|
+
+STATIC const mp_rom_map_elem_t displayio_module_globals_table[] = {
+    { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_displayio) },
+    { MP_ROM_QSTR(MP_QSTR_Bitmap), MP_ROM_PTR(&displayio_bitmap_type) },
+    { MP_ROM_QSTR(MP_QSTR_Group), MP_ROM_PTR(&displayio_group_type) },
+    { MP_ROM_QSTR(MP_QSTR_Palette), MP_ROM_PTR(&displayio_palette_type) },
+    { MP_ROM_QSTR(MP_QSTR_Sprite), MP_ROM_PTR(&displayio_sprite_type) },
+
+    { MP_ROM_QSTR(MP_QSTR_FourWire), MP_ROM_PTR(&displayio_fourwire_type) },
+};
+
+STATIC MP_DEFINE_CONST_DICT(displayio_module_globals, displayio_module_globals_table);
+
+const mp_obj_module_t displayio_module = {
+    .base = { &mp_type_module },
+    .globals = (mp_obj_dict_t*)&displayio_module_globals,
+};

shared-bindings/displayio/__init__.h

@@ -0,0 +1,34 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO___INIT___H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO___INIT___H
+
+#include "py/obj.h"
+
+// Nothing now.
+
+#endif  // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO___INIT___H

shared-module/displayio/Bitmap.c

@@ -0,0 +1,101 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Bitmap.h"
+
+#include <string.h>
+
+#include "py/runtime.h"
+
+void common_hal_displayio_bitmap_construct(displayio_bitmap_t *self, uint32_t width,
+    uint32_t height, uint32_t bits_per_value) {
+    uint32_t row_width = width * bits_per_value;
+    // word align
+    if (row_width % 32 != 0) {
+        self->stride = (row_width / 32 + 1);
+    } else {
+        self->stride = row_width / 32;
+    }
+    self->width = width;
+    self->height = height;
+    self->data = m_malloc(self->stride * height * sizeof(uint32_t), false);
+
+    self->bits_per_value = bits_per_value;
+
+    if (bits_per_value > 8) {
+        mp_raise_NotImplementedError(translate("Only bit maps of 8 bit color or less are supported"));
+    }
+
+    // Division and modulus can be slow because it has to handle any integer. We know bits_per_value
+    // is a power of two. We divide and mod by bits_per_value to compute the offset into the byte
+    // array. So, we can the offset computation to simplify to a shift for division and mask for mod.
+
+    self->x_shift = 0; // Used to divide the index by the number of pixels per word. Its used in a
+                       // shift which effectively divides by 2 ** x_shift.
+    uint32_t power_of_two = 1;
+    while (power_of_two < 32 / bits_per_value ) {
+        self->x_shift++;
+        power_of_two <<= 1;
+    }
+    self->x_mask = (1 << self->x_shift) - 1; // Used as a modulus on the x value
+    self->bitmask = (1 << bits_per_value) - 1;
+}
+
+void common_hal_displayio_bitmap_load_row(displayio_bitmap_t *self, uint16_t y, uint8_t* data, uint16_t len) {
+    if (len != self->stride * sizeof(uint32_t)) {
+        mp_raise_ValueError(translate("row must be packed and word aligned"));
+    }
+    uint32_t* row_value = self->data + (y * self->stride);
+    // Do the memcpy ourselves since we may want to flip endianness.
+    for (uint32_t i = 0; i < self->stride; i++) {
+        #pragma GCC diagnostic push
+        #pragma GCC diagnostic ignored "-Wcast-align"
+        uint32_t value = ((uint32_t *)data)[i];
+        #pragma GCC diagnostic pop
+        if (self->bits_per_value < 16) {
+            value = ((value >> 24) & 0xff) |
+                    ((value << 8) & 0xff0000) |
+                    ((value >> 8) & 0xff00) |
+                    ((value << 24) & 0xff000000);
+        }
+        *row_value = value;
+        row_value++;
+    }
+}
+uint32_t common_hal_displayio_bitmap_get_pixel(displayio_bitmap_t *self, int16_t x, int16_t y) {
+    if (x >= self->width || x < 0 || y >= self->height || y < 0) {
+        return 0;
+    }
+    int32_t row_start = y * self->stride;
+    if (self->bits_per_value < 8) {
+        uint32_t word = self->data[row_start + (x >> self->x_shift)];
+
+        return (word >> (32 - ((x & self->x_mask) + 1) * self->bits_per_value)) & self->bitmask;
+    } else {
+        uint32_t bytes_per_value = self->bits_per_value / 8;
+        return self->data[row_start + x * bytes_per_value];
+    }
+}

shared-module/displayio/Bitmap.h

@@ -0,0 +1,47 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_BITMAP_H
+#define MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_BITMAP_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    uint16_t width;
+    uint16_t height;
+    uint32_t* data;
+    uint16_t stride; // words
+    uint8_t bits_per_value;
+    uint8_t x_shift;
+    uint8_t x_mask;
+    uint16_t bitmask;
+} displayio_bitmap_t;
+
+#endif // MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_BITMAP_H

shared-module/displayio/Group.c

@@ -0,0 +1,88 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Group.h"
+
+#include "py/runtime.h"
+#include "shared-bindings/displayio/Sprite.h"
+
+void common_hal_displayio_group_construct(displayio_group_t* self, uint32_t max_size) {
+    mp_obj_t* children = m_new(mp_obj_t, max_size);
+    displayio_group_construct(self, children, max_size);
+}
+
+void common_hal_displayio_group_append(displayio_group_t* self, mp_obj_t layer) {
+    if (self->size == self->max_size) {
+        mp_raise_RuntimeError(translate("Group full"));
+    }
+    self->children[self->size] = layer;
+    self->size++;
+}
+
+void displayio_group_construct(displayio_group_t* self, mp_obj_t* child_array, uint32_t max_size) {
+    self->x = 0;
+    self->y = 1;
+    self->children = child_array;
+    self->max_size = max_size;
+}
+
+bool displayio_group_get_pixel(displayio_group_t *self, int16_t x, int16_t y, uint16_t* pixel) {
+    x -= self->x;
+    y -= self->y;
+    for (int32_t i = self->size - 1; i >= 0 ; i--) {
+        mp_obj_t layer = self->children[i];
+        if (MP_OBJ_IS_TYPE(layer, &displayio_sprite_type)) {
+            if (displayio_sprite_get_pixel(layer, x, y, pixel)) {
+                return true;
+            }
+        }
+        // TODO: Tiled layer
+    }
+    return false;
+}
+
+bool displayio_group_needs_refresh(displayio_group_t *self) {
+    for (int32_t i = self->size - 1; i >= 0 ; i--) {
+        mp_obj_t layer = self->children[i];
+        if (MP_OBJ_IS_TYPE(layer, &displayio_sprite_type)) {
+            if (displayio_sprite_needs_refresh(layer)) {
+                return true;
+            }
+        }
+        // TODO: Tiled layer
+    }
+    return false;
+}
+
+void displayio_group_finish_refresh(displayio_group_t *self) {
+    for (int32_t i = self->size - 1; i >= 0 ; i--) {
+        mp_obj_t layer = self->children[i];
+        if (MP_OBJ_IS_TYPE(layer, &displayio_sprite_type)) {
+            displayio_sprite_finish_refresh(layer);
+        }
+        // TODO: Tiled layer
+    }
+}

shared-module/displayio/Group.h

@@ -0,0 +1,53 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_GROUP_H
+#define MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_GROUP_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    int16_t x;
+    int16_t y;
+    uint16_t size;
+    uint16_t max_size;
+    mp_obj_t* children;
+} displayio_group_t;
+
+
+void common_hal_displayio_group_construct(displayio_group_t* self, uint32_t max_size);
+void common_hal_displayio_group_append(displayio_group_t* self, mp_obj_t layer);
+
+void displayio_group_construct(displayio_group_t* self, mp_obj_t* child_array, uint32_t max_size);
+bool displayio_group_get_pixel(displayio_group_t *group, int16_t x, int16_t y, uint16_t *pixel);
+bool displayio_group_needs_refresh(displayio_group_t *self);
+void displayio_group_finish_refresh(displayio_group_t *self);
+
+#endif // MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_GROUP_H

shared-module/displayio/Palette.c

@@ -0,0 +1,78 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Palette.h"
+
+void common_hal_displayio_palette_construct(displayio_palette_t* self, uint16_t color_count) {
+    self->color_count = color_count;
+    self->colors = (uint32_t *) m_malloc(color_count * sizeof(uint16_t), false);
+    uint32_t opaque_byte_count = color_count / 8;
+    if (color_count % 8 > 0) {
+        opaque_byte_count += 1;
+    }
+    self->opaque = (uint32_t *) m_malloc(opaque_byte_count, false);
+}
+
+void common_hal_displayio_palette_make_opaque(displayio_palette_t* self, uint32_t palette_index) {
+    self->opaque[palette_index / 32] &= ~(0x1 << (palette_index % 32));
+}
+
+void common_hal_displayio_palette_make_transparent(displayio_palette_t* self, uint32_t palette_index) {
+    self->opaque[palette_index / 32] |= (0x1 << (palette_index % 32));
+}
+
+void common_hal_displayio_palette_set_color(displayio_palette_t* self, uint32_t palette_index, uint32_t color) {
+    uint32_t shift = (palette_index % 2) * 16;
+    uint32_t masked = self->colors[palette_index / 2] & ~(0xffff << shift);
+    uint32_t b5 = (color >> 19);
+    uint32_t g6 = (color >> 10) & 0x3f;
+    uint32_t r5 = (color >> 3) & 0x1f;
+    uint32_t packed = r5 << 11 | g6 << 5 | b5;
+    // swap bytes
+    packed = __builtin_bswap16(packed);
+    self->colors[palette_index / 2] = masked | packed << shift;
+    self->needs_refresh = true;
+}
+
+bool displayio_palette_get_color(displayio_palette_t *self, uint32_t palette_index, uint16_t* color) {
+    if (palette_index > self->color_count) {
+        return false;
+    }
+    if ((self->opaque[palette_index / 32] & (0x1 << (palette_index % 32))) != 0) {
+        return false;
+    }
+    *color = (self->colors[palette_index / 2] >> (16 * (palette_index % 2))) & 0xffff;
+
+    return true;
+}
+
+bool displayio_palette_needs_refresh(displayio_palette_t *self) {
+    return self->needs_refresh;
+}
+
+void displayio_palette_finish_refresh(displayio_palette_t *self) {
+    self->needs_refresh = false;
+}

shared-module/displayio/Palette.h

@@ -0,0 +1,47 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_PALETTE_H
+#define MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_PALETTE_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    uint32_t* opaque;
+    uint32_t* colors;
+    uint8_t color_count;
+    bool needs_refresh;
+} displayio_palette_t;
+
+bool displayio_palette_get_color(displayio_palette_t *palette, uint32_t palette_index, uint16_t* color);
+bool displayio_palette_needs_refresh(displayio_palette_t *self);
+void displayio_palette_finish_refresh(displayio_palette_t *self);
+
+#endif // MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_PALLETE_H

shared-module/displayio/Sprite.c

@@ -0,0 +1,90 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/displayio/Sprite.h"
+
+
+#include "shared-bindings/displayio/Bitmap.h"
+
+void common_hal_displayio_sprite_construct(displayio_sprite_t *self, mp_obj_t bitmap,
+        mp_obj_t palette, uint16_t width, uint16_t height, uint16_t x, uint16_t y) {
+    self->width = width;
+    self->height = height;
+    self->bitmap = bitmap;
+    self->palette = palette;
+    self->x = x;
+    self->y = y;
+}
+
+void common_hal_displayio_sprite_get_position(displayio_sprite_t *self, int16_t* x, int16_t* y) {
+    *x = self->x;
+    *y = self->y;
+}
+
+void common_hal_displayio_sprite_set_position(displayio_sprite_t *self, int16_t x, int16_t y) {
+    self->x = x;
+    self->y = y;
+    self->needs_refresh = true;
+}
+
+
+displayio_palette_t* common_hal_displayio_sprite_get_palette(displayio_sprite_t *self) {
+    return self->palette;
+}
+
+void common_hal_displayio_sprite_set_palette(displayio_sprite_t *self, displayio_palette_t* palette) {
+    self->palette = palette;
+    self->needs_refresh = true;
+}
+
+bool displayio_sprite_get_pixel(displayio_sprite_t *self, int16_t x, int16_t y, uint16_t* pixel) {
+    x -= self->x;
+    y -= self->y;
+    if (y < 0 || y >= self->height || x >= self->width || x < 0) {
+        return false;
+    }
+
+    uint32_t value = common_hal_displayio_bitmap_get_pixel(self->bitmap, x, y);
+    if (self->palette == mp_const_none) {
+        *pixel = value;
+        return true;
+    } else if (MP_OBJ_IS_TYPE(self->palette, &displayio_palette_type) && displayio_palette_get_color(self->palette, value, pixel)) {
+        return true;
+    }
+
+    return false;
+}
+
+bool displayio_sprite_needs_refresh(displayio_sprite_t *self) {
+    return self->needs_refresh || displayio_palette_needs_refresh(self->palette);
+}
+
+void displayio_sprite_finish_refresh(displayio_sprite_t *self) {
+    self->needs_refresh = false;
+    displayio_palette_finish_refresh(self->palette);
+    // TODO(tannewt): We could double buffer changes to position and move them over here.
+    // That way they won't change during a refresh and tear.
+}

shared-module/displayio/Sprite.h

@@ -0,0 +1,51 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_SPRITE_H
+#define MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_SPRITE_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "py/obj.h"
+#include "shared-bindings/displayio/Palette.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    mp_obj_t bitmap;
+    displayio_palette_t* palette;
+    uint16_t x;
+    uint16_t y;
+    uint16_t width;
+    uint16_t height;
+    bool needs_refresh;
+} displayio_sprite_t;
+
+bool displayio_sprite_get_pixel(displayio_sprite_t *sprite, int16_t x, int16_t y, uint16_t *pixel);
+bool displayio_sprite_needs_refresh(displayio_sprite_t *self);
+void displayio_sprite_finish_refresh(displayio_sprite_t *self);
+
+#endif // MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_SPRITE_H

shared-module/displayio/__init__.c

@@ -0,0 +1,80 @@
+#include "shared-bindings/displayio/FourWire.h"
+
+extern displayio_fourwire_obj_t board_display_obj;
+
+void start_region_update(displayio_fourwire_obj_t* display, uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
+    // TODO delegate between different display types
+    displayio_fourwire_start_region_update(display, x0, y0, x1, y1);
+}
+
+void finish_region_update(displayio_fourwire_obj_t* display) {
+    // TODO delegate between different display types
+    displayio_fourwire_finish_region_update(display);
+}
+
+void finish_refresh(displayio_fourwire_obj_t* display) {
+    // TODO delegate between different display types
+    displayio_fourwire_finish_refresh(display);
+}
+
+bool frame_queued(displayio_fourwire_obj_t* display) {
+    // TODO delegate between different display types
+    return displayio_fourwire_frame_queued(display);
+}
+
+bool refresh_queued(displayio_fourwire_obj_t* display) {
+    // TODO delegate between different display types
+    return displayio_fourwire_refresh_queued(display);
+}
+
+bool send_pixels(displayio_fourwire_obj_t* display, uint32_t* pixels, uint32_t length) {
+    // TODO delegate between different display types
+    return displayio_fourwire_send_pixels(display, pixels, length);
+}
+
+void displayio_refresh_display(void) {
+    displayio_fourwire_obj_t* display = &board_display_obj;
+
+    if (!frame_queued(display)) {
+        return;
+    }
+    if (refresh_queued(display)) {
+        // We compute the pixels
+        uint16_t x0 = 0;
+        uint16_t y0 = 0;
+        uint16_t x1 = display->width;
+        uint16_t y1 = display->height;
+        size_t index = 0;
+        //size_t row_size = (x1 - x0);
+        uint16_t buffer_size = 256;
+        uint32_t buffer[buffer_size / 2];
+        start_region_update(display, x0, y0, x1, y1);
+        for (uint16_t y = y0; y < y1; ++y) {
+            for (uint16_t x = x0; x < x1; ++x) {
+                uint16_t* pixel = &(((uint16_t*)buffer)[index]);
+                *pixel = 0;
+                if (display->current_group != NULL) {
+                    displayio_group_get_pixel(display->current_group, x, y, pixel);
+                }
+
+
+                index += 1;
+                // The buffer is full, send it.
+                if (index >= buffer_size) {
+                    if (!send_pixels(display, buffer, buffer_size / 2)) {
+                        finish_region_update(display);
+                        return;
+                    }
+                    index = 0;
+                }
+            }
+        }
+        // Send the remaining data.
+        if (index && !send_pixels(display, buffer, index * 2)) {
+            finish_region_update(display);
+            return;
+        }
+        finish_region_update(display);
+    }
+    finish_refresh(display);
+}

shared-module/displayio/__init__.h

@@ -0,0 +1,32 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO___INIT___H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO___INIT___H
+
+void displayio_refresh_display(void);
+
+#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO___INIT___H

shared-module/displayio/mipi_constants.h

@@ -0,0 +1,37 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_MIPI_CONSTANTS_H
+#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_MIPI_CONSTANTS_H
+
+// More info here: https://www.tonylabs.com/wp-content/uploads/MIPI_DCS_specification_v1.02.00.pdf
+enum mipi_command {
+    MIPI_COMMAND_SET_COLUMN_ADDRESS = 0x2a,
+    MIPI_COMMAND_SET_PAGE_ADDRESS = 0x2b,
+    MIPI_COMMAND_WRITE_MEMORY_START = 0x2c,
+};
+
+#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_MIPI_CONSTANTS_H