translations

locale/ID.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -372,6 +372,10 @@ msgstr "Bit clock dan word harus memiliki kesamaan pada clock unit"
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Kedua pin harus mendukung hardware interrut"
@@ -1430,7 +1434,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1534,6 +1538,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3087,8 +3095,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx dan rx keduanya tidak boleh kosong"

locale/circuitpython.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -368,6 +368,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -1414,7 +1418,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1518,6 +1522,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3061,8 +3069,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""

locale/cs.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -368,6 +368,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -1414,7 +1418,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1518,6 +1522,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3061,8 +3069,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""

locale/de_DE.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2020-05-18 02:48+0000\n"
 "Last-Translator: Jeff Epler <jepler@gmail.com>\n"
 "Language-Team: German <https://later.unpythonic.net/projects/circuitpython/"
@@ -379,6 +379,10 @@ msgstr "Bit clock und word select müssen eine clock unit teilen"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit depth muss ein Vielfaches von 8 sein."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Beide pins müssen Hardware Interrupts unterstützen"
@@ -1438,7 +1442,7 @@ msgstr "Die Stackgröße sollte mindestens 256 sein"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream fehlt readinto() oder write() Methode."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1544,6 +1548,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3109,8 +3117,7 @@ msgstr "tupel/list hat falsche Länge"
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx und rx können nicht beide None sein"

locale/en_US.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -368,6 +368,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -1414,7 +1418,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1518,6 +1522,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3061,8 +3069,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""

locale/en_x_pirate.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2020-03-30 22:11+0000\n"
 "Last-Translator: Tannewt <devnull@unpythonic.net>\n"
 "Language-Team: English <https://later.unpythonic.net/projects/circuitpython/"
@@ -377,6 +377,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -1423,7 +1427,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1527,6 +1531,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3070,8 +3078,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""

locale/es.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2020-05-17 20:56+0000\n"
 "Last-Translator: Jeff Epler <jepler@gmail.com>\n"
 "Language-Team: \n"
@@ -375,6 +375,10 @@ msgstr "Bit clock y word select deben compartir una unidad de reloj"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bits depth debe ser múltiplo de 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Ambos pines deben soportar interrupciones por hardware"
@@ -1432,7 +1436,7 @@ msgstr "El tamaño de la pila debe ser de al menos 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "A Stream le falta el método readinto() o write()."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1536,6 +1540,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3104,8 +3112,7 @@ msgstr "tupla/lista tiene una longitud incorrecta"
 msgid "tuple/list required on RHS"
 msgstr "tuple/lista se require en RHS"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "Ambos tx y rx no pueden ser None"

locale/fil.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -374,6 +374,10 @@ msgstr "Ang bit clock at word select dapat makibahagi sa isang clock unit"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit depth ay dapat multiple ng 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Ang parehong mga pin ay dapat na sumusuporta sa hardware interrupts"
@@ -1437,7 +1441,7 @@ msgstr "Ang laki ng stack ay dapat na hindi bababa sa 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream kulang ng readinto() o write() method."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1541,6 +1545,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3117,8 +3125,7 @@ msgstr "mali ang haba ng tuple/list"
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx at rx hindi pwedeng parehas na None"

locale/fr.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2020-05-17 20:56+0000\n"
 "Last-Translator: Anonymous <noreply@weblate.org>\n"
 "Language-Team: French <https://later.unpythonic.net/projects/circuitpython/"
@@ -386,6 +386,10 @@ msgstr "'bit clock' et 'word select' doivent partager une horloge"
 msgid "Bit depth must be multiple of 8."
 msgstr "La profondeur de bit doit être un multiple de 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Les deux entrées doivent supporter les interruptions matérielles"
@@ -1458,7 +1462,7 @@ msgstr "La pile doit être au moins de 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Il manque une méthode readinto() ou write() au flux."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Fournissez au moins une broche UART"
 
@@ -1572,6 +1576,10 @@ msgstr "Erreur d'initialisation UART"
 msgid "UART Re-init error"
 msgstr "Erreur de réinitialisation UART"
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "Erreur d'écriture UART"
@@ -3157,8 +3165,7 @@ msgstr "tuple/liste a une mauvaise longueur"
 msgid "tuple/list required on RHS"
 msgstr "tuple ou liste requis en partie droite"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx et rx ne peuvent être 'None' tous les deux"

locale/it_IT.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -374,6 +374,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr "La profondità di bit deve essere multipla di 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Entrambi i pin devono supportare gli interrupt hardware"
@@ -1448,7 +1452,7 @@ msgstr "La dimensione dello stack deve essere almeno 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Metodi mancanti readinto() o write() allo stream."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1552,6 +1556,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3124,8 +3132,7 @@ msgstr "tupla/lista ha la lunghezza sbagliata"
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx e rx non possono essere entrambi None"

locale/ko.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2019-05-06 14:22-0700\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -372,6 +372,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -1418,7 +1422,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1522,6 +1526,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3066,8 +3074,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""

locale/nl.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2020-05-19 17:08+0000\n"
 "Last-Translator: Dustin Watts <dustin_watts@yahoo.com>\n"
 "Language-Team: none\n"
@@ -378,6 +378,10 @@ msgstr "Bit clock en word select moeten een clock eenheid delen"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit diepte moet een meervoud van 8 zijn."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Beide pinnen moeten hardware interrupts ondersteunen"
@@ -1448,7 +1452,7 @@ msgstr "Stack grootte moet op zijn minst 256 zijn"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream mist readinto() of write() methode."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Geef op zijn minst 1 UART pin op"
 
@@ -1560,6 +1564,10 @@ msgstr "UART Init Fout"
 msgid "UART Re-init error"
 msgstr "UART Re-init Fout"
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART schrijf fout"
@@ -3110,8 +3118,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""

locale/pl.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -371,6 +371,10 @@ msgstr "Zegar bitowy i wybór słowa muszą współdzielić jednostkę zegara"
 msgid "Bit depth must be multiple of 8."
 msgstr "Głębia musi być wielokrotnością 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Obie nóżki muszą wspierać przerwania sprzętowe"
@@ -1419,7 +1423,7 @@ msgstr "Stos musi mieć co najmniej 256 bajtów"
 msgid "Stream missing readinto() or write() method."
 msgstr "Strumień nie ma metod readinto() lub write()."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1523,6 +1527,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3072,8 +3080,7 @@ msgstr "krotka/lista ma złą długość"
 msgid "tuple/list required on RHS"
 msgstr "wymagana krotka/lista po prawej stronie"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx i rx nie mogą być oba None"

locale/pt_BR.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -371,6 +371,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Ambos os pinos devem suportar interrupções de hardware"
@@ -1431,7 +1435,7 @@ msgstr "O tamanho da pilha deve ser pelo menos 256"
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -1535,6 +1539,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -3085,8 +3093,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "TX e RX não podem ser ambos"

locale/sv.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2020-05-17 20:56+0000\n"
 "Last-Translator: Anonymous <noreply@weblate.org>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -378,6 +378,10 @@ msgstr "Bitklocka och ordval måste dela en klockenhet"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bitdjupet måste vara multipel av 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Båda pinnarna måste stödja maskinvaruavbrott"
@@ -1445,7 +1449,7 @@ msgstr "Stackstorleken måste vara minst 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream saknar readinto() eller write() metod."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Ange minst en UART-pinne"
 
@@ -1557,6 +1561,10 @@ msgstr "UART Init-fel"
 msgid "UART Re-init error"
 msgstr "UART reinit-fel"
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART skrivfel"
@@ -3118,8 +3126,7 @@ msgstr "tupel/lista har fel längd"
 msgid "tuple/list required on RHS"
 msgstr "tupel/lista krävs för RHS"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx och rx kan inte båda vara None"

locale/zh_Latn_pinyin.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"POT-Creation-Date: 2020-05-20 13:28-0400\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -377,6 +377,10 @@ msgstr "Bǐtè shízhōng hé dānzì xuǎnzé bìxū gòngxiǎng shízhōng dā
 msgid "Bit depth must be multiple of 8."
 msgstr "Bǐtè shēndù bìxū shì 8 bèi yǐshàng."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Liǎng gè yǐn jiǎo dōu bìxū zhīchí yìngjiàn zhōngduàn"
@@ -1433,7 +1437,7 @@ msgstr "Duīzhàn dàxiǎo bìxū zhìshǎo 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Liú quēshǎo readinto() huò write() fāngfǎ."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Dìngyì zhìshǎo yīgè UART yǐn jiǎo"
 
@@ -1544,6 +1548,10 @@ msgstr "UART chūshǐhuà cuòwù"
 msgid "UART Re-init error"
 msgstr "UART chóngxīn chūshǐhuà cuòwù"
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "UART peripheral is already in use"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART xiě cuòwù"
@@ -3102,8 +3110,7 @@ msgstr "yuán zǔ/lièbiǎo chángdù cuòwù"
 msgid "tuple/list required on RHS"
 msgstr "RHS yāoqiú de yuán zǔ/lièbiǎo"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx hé rx bùnéng dōu shì wú"