Merge branch 'main' into esp-analog-hang

2020-12-15 15:08:30 -05:00 · 2020-12-15 15:08:30 -05:00 · 3ad4b12ce1
parent cac755ba16 afcc00fed4
commit 3ad4b12ce1
43 changed files with 903 additions and 240 deletions
--- a/locale/ID.po
+++ b/locale/ID.po
@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-10-10 23:51+0000\n"
 "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@ -392,7 +392,7 @@ msgstr "Send yang lain sudah aktif"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array harus mengandung halfwords (ketik 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Nilai array harus berupa byte tunggal."
@ -504,8 +504,8 @@ msgstr "Panjang buffer harus kelipatan 512"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Penyangga harus memiliki panjang setidaknya 1"
@ -528,7 +528,7 @@ msgstr "Pin bus %d sudah digunakan"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Byte buffer harus 16 byte."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Bytes harus di antara 0 dan 255."
@ -1317,7 +1317,7 @@ msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
 msgid "No DMA channel found"
 msgstr "tidak ada channel DMA ditemukan"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1532,6 +1532,7 @@ msgstr "Izin ditolak"
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1587,10 +1588,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "Buffer awalan harus ada di heap"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Tekan tombol apa saja untuk masuk ke dalam REPL. Gunakan CTRL+D untuk reset "
 "(Reload)"
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1726,7 +1729,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Potongan dan nilai panjangnya berbeda."
@ -1945,6 +1948,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr ""
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr ""
@ -2072,6 +2079,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2154,7 +2165,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
@ -3254,7 +3266,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
@ -3846,6 +3858,11 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Tekan tombol apa saja untuk masuk ke dalam REPL. Gunakan CTRL+D untuk "
 #~ "reset (Reload)"
 #~ msgid ""
 #~ "\n"
 #~ "To exit, please reset the board without "
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@ -388,7 +388,7 @@ msgstr ""
 msgid "Array must contain halfwords (type 'H')"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr ""
@ -522,7 +522,7 @@ msgstr ""
 msgid "Byte buffer must be 16 bytes."
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr ""
@ -1700,7 +1700,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@ -1915,6 +1915,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr ""
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr ""
@ -2121,7 +2125,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
@ -3219,7 +3224,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
--- a/locale/cs.po
+++ b/locale/cs.po
@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
-"PO-Revision-Date: 2020-12-02 20:29+0000\n"
+"PO-Revision-Date: 2020-12-04 18:33+0000\n"
 "Last-Translator: vkuthan <vit.kuthan@seznam.cz>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: cs\n"
@ -22,7 +22,7 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 "\n"
-"Kód byl dokončen. Čekám na opětovné načtení.\n"
+"Kód byl dokončen. Čekám na opětovné nahrání.\n"
 #: supervisor/shared/safe_mode.c
 msgid ""
@ -58,11 +58,11 @@ msgstr "%d adresní piny a %d rgb piny označují výšku %d, nikoli %d"
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
-msgstr ""
+msgstr "Selhání %q: %d"
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
-msgstr "%q se nyní používá"
+msgstr "Používá se %q"
 #: extmod/moductypes.c ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
@ -70,11 +70,11 @@ msgstr "%q se nyní používá"
 #: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c py/objstr.c
 #: py/objstrunicode.c
 msgid "%q index out of range"
-msgstr "%q index je mimo rozsah"
+msgstr "Index %q je mimo rozsah"
 #: py/obj.c
 msgid "%q indices must be integers, not %q"
-msgstr "%q indexy musí být celá čísla, ne %q"
+msgstr "Indexy %q musí být celá čísla, ne %q"
 #: shared-bindings/vectorio/Polygon.c
 msgid "%q list must be a list"
@ -90,11 +90,11 @@ msgstr "%q musí být >= 0"
 #: shared-bindings/memorymonitor/AllocationAlarm.c
 #: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c
 msgid "%q must be >= 1"
-msgstr " %q musí být > = 1"
+msgstr "%q musí být > = 1"
 #: shared-module/vectorio/Polygon.c
 msgid "%q must be a tuple of length 2"
-msgstr " %q musí být n-tice délky 2"
+msgstr "%q musí být n-tice délky 2"
 #: shared-bindings/canio/Match.c
 msgid "%q out of range"
@ -102,23 +102,23 @@ msgstr "%q je mimo rozsah"
 #: ports/atmel-samd/common-hal/microcontroller/Pin.c
 msgid "%q pin invalid"
-msgstr ""
+msgstr "Pin %q není platný"
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
-msgstr " %q by měl být int"
+msgstr "%q by měl být int"
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
-msgstr ""
+msgstr "%q() vyžaduje %d pozičních argumentů, ale %d jich bylo zadáno"
 #: py/argcheck.c
 msgid "'%q' argument required"
-msgstr ""
+msgstr "Je vyžadován argument '%q'"
 #: py/runtime.c
 msgid "'%q' object cannot assign attribute '%q'"
-msgstr ""
+msgstr "'%q' nemůže přiřadit atribut '%q'"
 #: py/proto.c
 msgid "'%q' object does not support '%q'"
@ -392,7 +392,7 @@ msgstr ""
 msgid "Array must contain halfwords (type 'H')"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr ""
@ -502,8 +502,8 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr ""
@ -526,7 +526,7 @@ msgstr ""
 msgid "Byte buffer must be 16 bytes."
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr ""
@ -1300,7 +1300,7 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1507,6 +1507,7 @@ msgstr ""
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1559,7 +1560,11 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
@ -1695,7 +1700,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@ -1910,6 +1915,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr ""
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr ""
@ -2030,6 +2039,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2112,7 +2125,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
@ -3210,7 +3224,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-11-26 03:11+0000\n"
 "Last-Translator: Daniel Bravo Darriba <bravodarriba@gmail.com>\n"
 "Language: de_DE\n"
@ -391,7 +391,7 @@ msgstr "Ein anderer Sendevorgang ist schon aktiv"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array muss Halbwörter enthalten (type 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Array-Werte sollten aus Einzelbytes bestehen."
@ -505,8 +505,8 @@ msgstr "Die Pufferlänge muss ein vielfaches von 512 sein"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "Der Puffer muss ein vielfaches von 512 bytes sein"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Der Puffer muss eine Mindestenslänge von 1 haben"
@ -529,7 +529,7 @@ msgstr "Bus pin %d wird schon benutzt"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Der Puffer muss 16 Bytes lang sein."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Ein Bytes kann nur Werte zwischen 0 und 255 annehmen."
@ -1319,7 +1319,7 @@ msgstr "Kein DAC im Chip vorhanden"
 msgid "No DMA channel found"
 msgstr "Kein DMA Kanal gefunden"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1532,6 +1532,7 @@ msgstr "Zugang verweigert"
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin hat keine ADC Funktionalität"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "Pin kann nur als Eingang verwendet werden"
@ -1587,10 +1588,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "Der Präfixbuffer muss sich auf dem Heap befinden"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Drücke eine Taste um dich mit der REPL zu verbinden. Drücke Strg-D zum neu "
 "laden."
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1725,7 +1728,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice und Wert (value) haben unterschiedliche Längen."
@ -1954,6 +1957,10 @@ msgstr "Konnte Farbpalettendaten nicht lesen"
 msgid "Unable to write to nvm."
 msgstr "Schreiben in nvm nicht möglich."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Unerwarteter nrfx uuid-Typ"
@ -2087,6 +2094,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "WiFi Passwort muss zwischen 8 und 63 Zeichen lang sein"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr "Schreiben nicht unterstüzt für diese Charakteristik"
@ -2171,7 +2182,8 @@ msgstr "Argumente müssen ndarrays sein"
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "Array/Bytes auf der rechten Seite erforderlich"
@ -3289,7 +3301,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "nur eine sample_rate=16000 wird unterstützt"
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
 "Es werden nur Slices mit Schritt = 1 (auch bekannt als None) unterstützt"
@ -3890,6 +3902,11 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Drücke eine Taste um dich mit der REPL zu verbinden. Drücke Strg-D zum "
 #~ "neu laden."
 #~ msgid "arctan2 is implemented for scalars and ndarrays only"
 #~ msgstr "arctan2 ist nur für Skalare und ndarrays implementiert"
--- a/locale/el.po
+++ b/locale/el.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@ -387,7 +387,7 @@ msgstr ""
 msgid "Array must contain halfwords (type 'H')"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr ""
@ -497,8 +497,8 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr ""
@ -521,7 +521,7 @@ msgstr ""
 msgid "Byte buffer must be 16 bytes."
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr ""
@ -1295,7 +1295,7 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1502,6 +1502,7 @@ msgstr ""
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1554,7 +1555,11 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
@ -1690,7 +1695,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@ -1905,6 +1910,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr ""
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr ""
@ -2025,6 +2034,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2107,7 +2120,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
@ -3205,7 +3219,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
--- a/locale/es.po
+++ b/locale/es.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-11-27 18:34+0000\n"
 "Last-Translator: Iván Montiel Cardona <ivan_montiel2013@hotmail.com>\n"
 "Language-Team: \n"
@ -397,7 +397,7 @@ msgstr "Otro envío ya está activo"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "El array debe contener medias palabras (escriba 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Valores del array deben ser bytes individuales."
@ -511,8 +511,8 @@ msgstr "El tamaño del búfer debe ser múltiplo de 512"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "Búfer deber ser un múltiplo de 512 bytes"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Buffer debe ser de longitud 1 como minimo"
@ -535,7 +535,7 @@ msgstr "Bus pin %d ya está siendo utilizado"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Búfer Byte debe de ser 16 bytes."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Bytes debe estar entre 0 y 255."
@ -1318,7 +1318,7 @@ msgstr "El chip no tiene DAC"
 msgid "No DMA channel found"
 msgstr "No se encontró el canal DMA"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1533,6 +1533,7 @@ msgstr "Permiso denegado"
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin no tiene capacidad ADC"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "El pin es solo de entrada"
@ -1592,9 +1593,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "El prefijo del buffer debe estar en el heap"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Presiona cualquier tecla para entrar al REPL. Usa CTRL-D para recargar."
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1729,7 +1733,7 @@ msgstr "El contexto del lado del servidor no puede tener un hostname"
 msgid "Size not supported"
 msgstr "Sin capacidades para el tamaño"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice y value tienen tamaños diferentes."
@ -1958,6 +1962,10 @@ msgstr "No se pudo leer los datos de la paleta de colores"
 msgid "Unable to write to nvm."
 msgstr "Imposible escribir en nvm."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Tipo de uuid nrfx inesperado"
@ -2089,6 +2097,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "La clave de WiFi debe ser entre 8 y 63 caracteres"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr "Escrituras no admitidas en Characteristic"
@ -2171,7 +2183,8 @@ msgstr "argumentos deben ser ndarrays"
 msgid "array and index length must be equal"
 msgstr "Longitud del array e índice tienen que ser iguales"
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes requeridos en el lado derecho"
@ -3282,7 +3295,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "solo se admite sample_rate=16000"
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "solo se admiten segmentos con step=1 (alias None)"
@ -3876,6 +3889,10 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Presiona cualquier tecla para entrar al REPL. Usa CTRL-D para recargar."
 #~ msgid "Only IPv4 SOCK_STREAM sockets supported"
 #~ msgstr "Solo hay capacidad para enchufes IPv4 SOCK_STREAM"
--- a/locale/fil.po
+++ b/locale/fil.po
@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@ -390,7 +390,7 @@ msgstr "Isa pang send ay aktibo na"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "May halfwords (type 'H') dapat ang array"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Array values ay dapat single bytes."
@ -502,8 +502,8 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Buffer dapat ay hindi baba sa 1 na haba"
@ -527,7 +527,7 @@ msgstr "Ginagamit na ang DAC"
 msgid "Byte buffer must be 16 bytes."
 msgstr "buffer ay dapat bytes-like object"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Sa gitna ng 0 o 255 dapat ang bytes."
@ -1310,7 +1310,7 @@ msgstr "Walang DAC sa chip"
 msgid "No DMA channel found"
 msgstr "Walang DMA channel na mahanap"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1521,6 +1521,7 @@ msgstr "Walang pahintulot"
 msgid "Pin does not have ADC capabilities"
 msgstr "Ang pin ay walang kakayahan sa ADC"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1573,10 +1574,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Pindutin ang anumang key upang pumasok sa REPL. Gamitin ang CTRL-D upang i-"
 "reload."
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1712,7 +1715,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice at value iba't ibang haba."
@ -1927,6 +1930,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr "Hindi ma i-sulat sa NVM."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 #, fuzzy
 msgid "Unexpected nrfx uuid type"
@ -2057,6 +2064,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2139,7 +2150,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes kinakailangan sa kanang bahagi"
@ -3255,7 +3267,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "ang mga slices lamang na may hakbang = 1 (aka None) ang sinusuportahan"
@ -3853,6 +3865,11 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Pindutin ang anumang key upang pumasok sa REPL. Gamitin ang CTRL-D upang "
 #~ "i-reload."
 #~ msgid "%q indices must be integers, not %s"
 #~ msgstr "%q indeks ay dapat integers, hindi %s"
--- a/locale/fr.po
+++ b/locale/fr.po
@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
-"PO-Revision-Date: 2020-11-24 22:45+0000\n"
+"PO-Revision-Date: 2020-12-08 19:21+0000\n"
 "Last-Translator: Antonin ENFRUN <antonin.e@me.com>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
@ -397,7 +397,7 @@ msgstr "Un autre envoi est déjà actif"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Le tableau doit contenir des demi-mots (type 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Les valeurs du tableau doivent être des octets simples 'bytes'."
@ -511,8 +511,8 @@ msgstr "La longueur de la mémoire tampon doit être un multiple de 512"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "La mémoire tampon doit être un multiple de 512"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Le tampon doit être de longueur au moins 1"
@ -535,7 +535,7 @@ msgstr "La broche %d du bus est déjà utilisée"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Le tampon doit être de 16 octets."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Les octets 'bytes' doivent être entre 0 et 255."
@ -1303,7 +1303,7 @@ msgstr "Doit utiliser un multiple de 6 broches RVB, pas %d"
 #: ports/esp32s2/common-hal/nvm/ByteArray.c
 msgid "NVS Error"
-msgstr ""
+msgstr "Erreur NVS"
 #: py/parse.c
 msgid "Name too long"
@ -1323,10 +1323,10 @@ msgstr "Pas de DAC sur la puce"
 msgid "No DMA channel found"
 msgstr "Aucun canal DMA trouvé"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
-msgstr ""
+msgstr "Pas de dispositif I2C à l'adresse : %x"
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
@ -1468,7 +1468,7 @@ msgstr "Seules les adresses IPv4 sont prises en charge"
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "Only IPv4 sockets supported"
-msgstr ""
+msgstr "Seules les sockets IPv4 sont prises en charge"
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
@ -1540,6 +1540,7 @@ msgstr "Permission refusée"
 msgid "Pin does not have ADC capabilities"
 msgstr "La broche ne peut être utilisée pour l'ADC"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "La broche est entrée uniquement"
@ -1554,7 +1555,7 @@ msgstr "Numéro de broche déjà réservé par EXTI"
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "PinAlarm not yet implemented"
-msgstr ""
+msgstr "PinAlarm pas encore implémenté"
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@ -1599,8 +1600,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "Le tampon de préfixe doit être sur le tas"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
-msgstr "Appuyez sur une touche pour entrer sur REPL ou CTRL-D pour recharger."
+msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1735,7 +1740,7 @@ msgstr "Un contexte niveau serveur ne peut avoir de hostname"
 msgid "Size not supported"
 msgstr "Taille non prise en charge"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Tranche et valeur de tailles différentes."
@ -1772,7 +1777,7 @@ msgstr "Fournissez au moins une broche UART"
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Supply one of monotonic_time or epoch_time"
-msgstr ""
+msgstr "Fournissez l'un de monotonic_time ou epoch_time"
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
@ -1965,6 +1970,10 @@ msgstr "Impossible de lire les données de la palette de couleurs"
 msgid "Unable to write to nvm."
 msgstr "Impossible d'écrire sur la mémoire non-volatile."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Type inattendu pour l'uuid nrfx"
@ -2098,6 +2107,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "Le mot de passe WiFi doit faire entre 8 et 63 caractères"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr "Écritures non prises en charge sur la caractéristique"
@ -2180,7 +2193,8 @@ msgstr "les arguments doivent être des ndarrays"
 msgid "array and index length must be equal"
 msgstr "la longueur du tableau et de l'index doit être égale"
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "tableau/octets requis à droite"
@ -3300,7 +3314,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "seul sample_rate = 16000 est pris en charge"
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "seules les tranches avec 'step=1' (cad None) sont supportées"
@ -3897,6 +3911,10 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Appuyez sur une touche pour entrer sur REPL ou CTRL-D pour recharger."
 #~ msgid "Only IPv4 SOCK_STREAM sockets supported"
 #~ msgstr "Seules les sockets IPv4 SOCK_STREAM sont prises en charge"
--- a/locale/hi.po
+++ b/locale/hi.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@ -387,7 +387,7 @@ msgstr ""
 msgid "Array must contain halfwords (type 'H')"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr ""
@ -497,8 +497,8 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr ""
@ -521,7 +521,7 @@ msgstr ""
 msgid "Byte buffer must be 16 bytes."
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr ""
@ -1295,7 +1295,7 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1502,6 +1502,7 @@ msgstr ""
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1554,7 +1555,11 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
@ -1690,7 +1695,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@ -1905,6 +1910,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr ""
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr ""
@ -2025,6 +2034,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2107,7 +2120,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
@ -3205,7 +3219,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@ -389,7 +389,7 @@ msgstr "Another send è gia activato"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array deve avere mezzoparole (typo 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Valori di Array dovrebbero essere bytes singulari"
@ -502,8 +502,8 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Il buffer deve essere lungo almeno 1"
@ -527,7 +527,7 @@ msgstr "DAC già in uso"
 msgid "Byte buffer must be 16 bytes."
 msgstr "i buffer devono essere della stessa lunghezza"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "I byte devono essere compresi tra 0 e 255"
@ -1314,7 +1314,7 @@ msgstr "Nessun DAC sul chip"
 msgid "No DMA channel found"
 msgstr "Nessun canale DMA trovato"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1530,6 +1530,7 @@ msgstr "Permesso negato"
 msgid "Pin does not have ADC capabilities"
 msgstr "Il pin non ha capacità di ADC"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1583,9 +1584,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Premi un qualunque tasto per entrare nel REPL. Usa CTRL-D per ricaricare."
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1723,7 +1727,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@ -1938,6 +1942,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr "Imposibile scrivere su nvm."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 #, fuzzy
 msgid "Unexpected nrfx uuid type"
@ -2060,6 +2068,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2142,7 +2154,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
@ -3260,7 +3273,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "solo slice con step=1 (aka None) sono supportate"
@ -3860,6 +3873,10 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Premi un qualunque tasto per entrare nel REPL. Usa CTRL-D per ricaricare."
 #~ msgid "%q indices must be integers, not %s"
 #~ msgstr "gli indici %q devono essere interi, non %s"
--- a/locale/ja.po
+++ b/locale/ja.po
@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-11-27 18:34+0000\n"
 "Last-Translator: sporeball <sporeballdev@gmail.com>\n"
 "Language-Team: none\n"
@ -394,7 +394,7 @@ msgstr "他のsendがすでにアクティブ"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "array のタイプは16ビット ('H') でなければなりません"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Arrayの各値は1バイトでなければなりません"
@ -506,8 +506,8 @@ msgstr "バッファ長は512の倍数でなければなりません"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "バッファは512の倍数でなければなりません"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "バッファ長は少なくとも1以上でなければなりません"
@ -530,7 +530,7 @@ msgstr "Busピン%dはすでに使用中"
 msgid "Byte buffer must be 16 bytes."
 msgstr "バッファは16バイトでなければなりません"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "バイト値は0から255の間でなければなりません"
@ -1310,7 +1310,7 @@ msgstr "チップにDACがありません"
 msgid "No DMA channel found"
 msgstr "DMAチャネルが見つかりません"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1520,6 +1520,7 @@ msgstr "パーミッション拒否"
 msgid "Pin does not have ADC capabilities"
 msgstr "ピンにADCの能力がありません"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "ピンは入力専用"
@ -1572,8 +1573,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "Prefixバッファはヒープ上になければなりません"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
-msgstr "何らかのキーを押すとREPLに入ります。CTRL-Dでリロード。"
+msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1708,7 +1713,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr "サイズは対応していません"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "スライスと値の長さが一致しません"
@ -1930,6 +1935,10 @@ msgstr "カラーパレットデータを読み込めません"
 msgid "Unable to write to nvm."
 msgstr "nvmに書き込みできません"
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "想定されていないnrfx UUID型"
@ -2050,6 +2059,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "WiFiパスワードは8〜63文字でなければなりません"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2132,7 +2145,8 @@ msgstr "引数はndarrayでなければなりません"
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "右辺にはarray/bytesが必要"
@ -3235,7 +3249,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
@ -3829,6 +3843,9 @@ msgstr "ziはfloat値でなければなりません"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr "何らかのキーを押すとREPLに入ります。CTRL-Dでリロード。"
 #~ msgid "axis must be -1, 0, None, or 1"
 #~ msgstr "axisは -1, 0, 1, None のいずれかでなければなりません"
--- a/locale/ko.po
+++ b/locale/ko.po
@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-10-05 12:12+0000\n"
 "Last-Translator: Michal Čihař <michal@cihar.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@ -390,7 +390,7 @@ msgstr ""
 msgid "Array must contain halfwords (type 'H')"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr ""
@ -502,8 +502,8 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "잘못된 크기의 버퍼. >1 여야합니다"
@ -526,7 +526,7 @@ msgstr ""
 msgid "Byte buffer must be 16 bytes."
 msgstr "잘못된 크기의 버퍼. 16 바이트 여야합니다."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "바이트는 0에서 255 사이 여야합니다."
@ -1300,7 +1300,7 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1507,6 +1507,7 @@ msgstr ""
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1559,7 +1560,11 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
@ -1695,7 +1700,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr ""
@ -1911,6 +1916,10 @@ msgstr ""
 msgid "Unable to write to nvm."
 msgstr ""
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr ""
@ -2031,6 +2040,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2113,7 +2126,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
@ -3211,7 +3225,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
--- a/locale/nl.po
+++ b/locale/nl.po
@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-10-27 16:47+0000\n"
 "Last-Translator: Jelle Jager <jell@jjc.id.au>\n"
 "Language-Team: none\n"
@ -392,7 +392,7 @@ msgstr "Een andere send is al actief"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array moet halfwords (type 'H') bevatten"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Array waardes moet enkele bytes zijn."
@ -504,8 +504,8 @@ msgstr "Buffer lengte moet een veelvoud van 512 zijn"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "Buffer moet een veelvoud van 512 bytes zijn"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Buffer moet op zijn minst lengte 1 zijn"
@ -528,7 +528,7 @@ msgstr "Bus pin %d al in gebruik"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Byte buffer moet 16 bytes zijn."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Bytes moeten tussen 0 en 255 liggen."
@ -1312,7 +1312,7 @@ msgstr "Geen DAC op de chip"
 msgid "No DMA channel found"
 msgstr "Geen DMA kanaal gevonden"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1528,6 +1528,7 @@ msgstr "Toegang geweigerd"
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin heeft geen ADC mogelijkheden"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "Pin kan alleen voor invoer gebruikt worden"
@ -1587,10 +1588,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "Prefix buffer moet op de heap zijn"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Druk een willekeurige toets om de REPL te starten. Gebruik CTRL+D om te "
 "herstarten."
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1725,7 +1728,7 @@ msgstr "Context aan de serverkant kan geen hostnaam hebben"
 msgid "Size not supported"
 msgstr "Afmeting niet ondersteund"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice en waarde hebben verschillende lengtes."
@ -1950,6 +1953,10 @@ msgstr "Niet in staat kleurenpalet data te lezen"
 msgid "Unable to write to nvm."
 msgstr "Niet in staat om naar nvm te schrijven."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Onverwacht mrfx uuid type"
@ -2081,6 +2088,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "WiFi wachtwoord moet tussen 8 en 63 karakters bevatten"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr "Schrijven niet ondersteund op Characteristic"
@ -2163,7 +2174,8 @@ msgstr "argumenten moeten ndarrays zijn"
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes vereist aan de rechterkant"
@ -3269,7 +3281,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "alleen sample_rate=16000 wordt ondersteund"
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "alleen segmenten met step=1 (ook wel None) worden ondersteund"
@ -3863,6 +3875,11 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Druk een willekeurige toets om de REPL te starten. Gebruik CTRL+D om te "
 #~ "herstarten."
 #~ msgid "Only IPv4 SOCK_STREAM sockets supported"
 #~ msgstr "Alleen IPv4 SOCK_STREAM sockets worden ondersteund"
--- a/locale/pl.po
+++ b/locale/pl.po
@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-12-02 20:29+0000\n"
 "Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n"
 "Language-Team: pl\n"
@ -394,7 +394,7 @@ msgstr "Wysyłanie jest już w toku"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Tablica musi zawierać pół-słowa (typ 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Wartości powinny być bajtami."
@ -506,8 +506,8 @@ msgstr "Długość bufora musi być wielokrotnością 512"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "Bufor musi być wielokrotnością 512 bajtów"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Bufor musi mieć długość 1 lub więcej"
@ -530,7 +530,7 @@ msgstr "Nóżka magistrali %d jest w użyciu"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Bufor musi mieć 16 bajtów."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Bytes musi być między 0 a 255."
@ -1311,7 +1311,7 @@ msgstr "Brak DAC"
 msgid "No DMA channel found"
 msgstr "Nie znaleziono kanału DMA"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1518,6 +1518,7 @@ msgstr "Odmowa dostępu"
 msgid "Pin does not have ADC capabilities"
 msgstr "Nóżka nie obsługuje ADC"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@ -1570,8 +1571,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
-msgstr "Dowolny klawisz aby uruchomić konsolę. CTRL-D aby przeładować."
+msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1706,7 +1711,7 @@ msgstr ""
 msgid "Size not supported"
 msgstr ""
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Fragment i wartość są różnych długości."
@ -1921,6 +1926,10 @@ msgstr "Nie można odczytać danych palety"
 msgid "Unable to write to nvm."
 msgstr "Błąd zapisu do NVM."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Nieoczekiwany typ nrfx uuid"
@ -2047,6 +2056,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@ -2129,7 +2142,8 @@ msgstr ""
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "tablica/bytes wymagane po prawej stronie"
@ -3228,7 +3242,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr ""
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "tylko fragmenty ze step=1 (lub None) są wspierane"
@ -3821,6 +3835,9 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr "Dowolny klawisz aby uruchomić konsolę. CTRL-D aby przeładować."
 #~ msgid "number of arguments must be 2, or 3"
 #~ msgstr "liczba argumentów musi wynosić 2 lub 3"
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
-"PO-Revision-Date: 2020-11-30 18:06+0000\n"
+"PO-Revision-Date: 2020-12-11 19:08+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@ -396,7 +396,7 @@ msgstr "Outro envio já está ativo"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Array deve conter meias palavras (tipo 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Os valores das matrizes devem ser bytes simples."
@ -512,8 +512,8 @@ msgstr "O comprimento do Buffer deve ser um múltiplo de 512"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "O buffer deve ser um múltiplo de 512 bytes"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "O comprimento do buffer deve ter pelo menos 1"
@ -536,7 +536,7 @@ msgstr "O pino bus %d já está em uso"
 msgid "Byte buffer must be 16 bytes."
 msgstr "O buffer deve ter 16 bytes."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Os bytes devem estar entre 0 e 255."
@ -868,7 +868,7 @@ msgstr "Um endereço esperado"
 #: shared-bindings/alarm/__init__.c
 msgid "Expected an alarm"
-msgstr ""
+msgstr "Um alarme era esperado"
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
@ -1019,7 +1019,7 @@ msgstr "O I2SOut não está disponível"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
-msgstr ""
+msgstr "IOs 0, 2 e 4 não suportam pullup interno em repouso (sleep)"
 #: shared-bindings/aesio/aes.c
 #, c-format
@ -1321,10 +1321,10 @@ msgstr "Nenhum DAC no chip"
 msgid "No DMA channel found"
 msgstr "Nenhum canal DMA encontrado"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
-msgstr ""
+msgstr "Nenhum dispositivo I2C no endereço: %x"
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
@ -1486,7 +1486,7 @@ msgstr ""
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "Only one alarm.time alarm can be set."
-msgstr ""
+msgstr "Apenas um alarme alarm.time pode ser definido."
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
@ -1537,6 +1537,7 @@ msgstr "Permissão negada"
 msgid "Pin does not have ADC capabilities"
 msgstr "O pino não tem recursos de ADC"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "Apenas o pino de entrada"
@ -1551,7 +1552,7 @@ msgstr "Número do PIN já está reservado através da EXTI"
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "PinAlarm not yet implemented"
-msgstr ""
+msgstr "PinAlarm ainda não foi implementado"
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@ -1598,9 +1599,15 @@ msgstr ""
 "(heap)"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
-"Pressione qualquer tecla para entrar no REPL. Use CTRL-D para recarregar."
+"Pressione qualquer tecla para entrar no REPL. Use CTRL-D para recarregar.\n"
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Simular o deep sleep até o alarme, até qualquer chave ou até a escrita do "
 "arquivo.\n"
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1735,7 +1742,7 @@ msgstr "O contexto do lado do servidor não pode ter nome de host"
 msgid "Size not supported"
 msgstr "O tamanho não é suportado"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Fatie e avalie os diferentes comprimentos."
@ -1772,7 +1779,7 @@ msgstr "Forneça pelo menos um pino UART"
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Supply one of monotonic_time or epoch_time"
-msgstr ""
+msgstr "Forneça um de monotonic_time ou de epoch_time"
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
@ -1848,7 +1855,7 @@ msgstr "A largura do bloco deve dividir exatamente com a largura do bitmap"
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Time is in the past."
-msgstr ""
+msgstr "O tempo está no passado."
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
@ -1964,6 +1971,10 @@ msgstr "Não foi possível ler os dados da paleta de cores"
 msgid "Unable to write to nvm."
 msgstr "Não é possível gravar no nvm."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Tipo uuid nrfx inesperado"
@ -2096,6 +2107,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "A senha do Wi-Fi deve ter entre 8 e 63 caracteres"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr "Foi despertado através do alarme.\n"
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr "A escrita não é compatível na Característica"
@ -2178,7 +2193,8 @@ msgstr "os argumentos devem ser ndarrays"
 msgid "array and index length must be equal"
 msgstr "a matriz e comprimento do índice devem ser iguais"
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "matriz/bytes são necessários no lado direito"
@ -2592,7 +2608,7 @@ msgstr "end_x deve ser um int"
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "epoch_time not supported on this board"
-msgstr ""
+msgstr "O epoch_time não é compatível com esta placa"
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
@ -2965,7 +2981,7 @@ msgstr "sintaxe inválida para o número"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "io must be rtc io"
-msgstr ""
+msgstr "O io deve ser rtc io"
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
@ -3290,7 +3306,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "apenas sample_rate = 16000 é compatível"
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr ""
 "apenas fatias com a etapa=1 (também conhecida como Nenhuma) são compatíveis"
@ -3668,7 +3684,7 @@ msgstr "o trapz está definido para 1D arrays de igual tamanho"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "trigger level must be 0 or 1"
-msgstr ""
+msgstr "nível do gatilho deve ser 0 ou 1"
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
@ -3814,7 +3830,7 @@ msgstr "os vetores devem ter os mesmos comprimentos"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "wakeup conflict"
-msgstr ""
+msgstr "conflito de wakeup"
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
@ -3888,6 +3904,10 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Pressione qualquer tecla para entrar no REPL. Use CTRL-D para recarregar."
 #~ msgid "Only IPv4 SOCK_STREAM sockets supported"
 #~ msgstr "São suportados apenas soquetes IPv4 SOCK_STREAM"
--- a/locale/sv.po
+++ b/locale/sv.po
@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
-"PO-Revision-Date: 2020-11-30 18:06+0000\n"
+"PO-Revision-Date: 2020-12-07 20:26+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@ -392,7 +392,7 @@ msgstr "En annan send är redan aktiv"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Matrisen måste innehålla halfwords (typ \"H\")"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Matrisvärden ska bestå av enstaka bytes."
@ -504,8 +504,8 @@ msgstr "Buffertlängd måste vara en multipel av 512"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "Bufferten måste vara en multipel av 512 byte"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Bufferten måste ha minst längd 1"
@ -528,7 +528,7 @@ msgstr "Busspinne %d används redan"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Byte-buffert måste vara 16 byte."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Bytes måste vara mellan 0 och 255."
@ -859,7 +859,7 @@ msgstr "Förväntade en adress"
 #: shared-bindings/alarm/__init__.c
 msgid "Expected an alarm"
-msgstr ""
+msgstr "Förväntade ett larm"
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
@ -1008,7 +1008,7 @@ msgstr "I2SOut är inte tillgängligt"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
-msgstr ""
+msgstr "IO 0, 2 & 4 stöder inte intern pullup för sovläge"
 #: shared-bindings/aesio/aes.c
 #, c-format
@ -1311,10 +1311,10 @@ msgstr "Ingen DAC på chipet"
 msgid "No DMA channel found"
 msgstr "Ingen DMA-kanal hittades"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
-msgstr ""
+msgstr "Ingen I2C-enhet på adress: %x"
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
@ -1476,7 +1476,7 @@ msgstr ""
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "Only one alarm.time alarm can be set."
-msgstr ""
+msgstr "Endast ett alarm.time kan ställas in."
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
@ -1525,6 +1525,7 @@ msgstr "Åtkomst nekad"
 msgid "Pin does not have ADC capabilities"
 msgstr "Pinnen har inte ADC-funktionalitet"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "Pinnen är enbart ingång"
@ -1539,7 +1540,7 @@ msgstr "PInn-nummer redan reserverat av EXTI"
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "PinAlarm not yet implemented"
-msgstr ""
+msgstr "PinAlarm är inte implementerat ännu"
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@ -1584,9 +1585,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "Prefixbufferten måste finnas på heap"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 "Tryck på valfri knapp för att gå in i REPL. Använd CTRL-D för att ladda om."
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1721,7 +1725,7 @@ msgstr "Serversidans kontext kan inte ha värdnamn"
 msgid "Size not supported"
 msgstr "Storleken stöds inte"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Slice och värde har olika längd."
@ -1758,7 +1762,7 @@ msgstr "Ange minst en UART-pinne"
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Supply one of monotonic_time or epoch_time"
-msgstr ""
+msgstr "Ange en av monotonic_time eller epoch_time"
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
@ -1833,7 +1837,7 @@ msgstr "Tile-bredd måste vara jämnt delbar med bredd på bitmap"
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Time is in the past."
-msgstr ""
+msgstr "Tid har passerats."
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
@ -1946,6 +1950,10 @@ msgstr "Det går inte att läsa färgpalettdata"
 msgid "Unable to write to nvm."
 msgstr "Det gick inte att skriva till nvm."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Oväntad nrfx uuid-typ"
@ -2074,6 +2082,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "WiFi-lösenord måste vara mellan 8 och 63 tecken"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr "Skrivning stöds inte på karaktäristik"
@ -2156,7 +2168,8 @@ msgstr "argumenten måste vara ndarray"
 msgid "array and index length must be equal"
 msgstr "array och indexlängd måste vara lika"
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "array/bytes krävs på höger sida"
@ -2566,7 +2579,7 @@ msgstr "color ska vara en int"
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "epoch_time not supported on this board"
-msgstr ""
+msgstr "epoch_time stöds inte av detta kort"
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
@ -2939,7 +2952,7 @@ msgstr "ogiltig syntax för tal"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "io must be rtc io"
-msgstr ""
+msgstr "io måste vara rtc io"
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
@ -3262,7 +3275,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "enbart sample_rate=16000 stöds"
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "endast segment med steg=1 (aka Ingen) stöds"
@ -3636,7 +3649,7 @@ msgstr "trapz är definierad för 1D-matriser med samma längd"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "trigger level must be 0 or 1"
-msgstr ""
+msgstr "triggernivå måste vara 0 eller 1"
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
@ -3782,7 +3795,7 @@ msgstr "vektorer måste ha samma längd"
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "wakeup conflict"
-msgstr ""
+msgstr "wakeup-konflikt"
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
@ -3856,6 +3869,11 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Tryck på valfri knapp för att gå in i REPL. Använd CTRL-D för att ladda "
 #~ "om."
 #~ msgid "Only IPv4 SOCK_STREAM sockets supported"
 #~ msgstr "Endast IPv4 SOCK_STREAM sockets stöds"
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-27 23:57-0500\n"
+"POT-Creation-Date: 2020-12-14 11:48-0500\n"
 "PO-Revision-Date: 2020-11-19 01:28+0000\n"
 "Last-Translator: hexthat <hexthat@gmail.com>\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@ -394,7 +394,7 @@ msgstr "Lìng yīgè fāsòng yǐjīng jīhuó"
 msgid "Array must contain halfwords (type 'H')"
 msgstr "Shùzǔ bìxū bāohán bàn zìshù (type 'H')"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
 msgstr "Shùzǔ zhí yīnggāi shì dāngè zì jié."
@ -506,8 +506,8 @@ msgstr "Huǎn chōng qū cháng dù bì xū wéi 512 de bèi shù"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr "Huǎn chōng qū bì xū shì 512 zì jié de bèi shù"
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
-#: shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Huǎnchōng qū bìxū zhìshǎo chángdù 1"
@ -530,7 +530,7 @@ msgstr "Zǒngxiàn yǐn jiǎo %d yǐ zài shǐyòng zhōng"
 msgid "Byte buffer must be 16 bytes."
 msgstr "Zì jié huǎnchōng qū bìxū shì 16 zì jié."
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
 msgstr "Zì jié bìxū jiè yú 0 dào 255 zhī jiān."
@ -1308,7 +1308,7 @@ msgstr "Méiyǒu DAC zài xīnpiàn shàng de"
 msgid "No DMA channel found"
 msgstr "Wèi zhǎodào DMA píndào"
-#: shared-module/busdevice/I2CDevice.c
+#: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
 msgstr ""
@ -1521,6 +1521,7 @@ msgstr "Quánxiàn bèi jùjué"
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin méiyǒu ADC nénglì"
 #: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr "Yǐn jiǎo jǐn shūrù"
@ -1577,8 +1578,12 @@ msgid "Prefix buffer must be on the heap"
 msgstr "Qiánzhuì huǎnchōng qū bìxū zài duī shàng"
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
-msgstr "Àn xià rènhé jiàn jìnrù REPL. Shǐyòng CTRL-D chóngxīn jiāzài."
+msgstr ""
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@ -1713,7 +1718,7 @@ msgstr "Fúwùqì duān shàngxiàwén bùnéng jùyǒu zhǔjī míng"
 msgid "Size not supported"
 msgstr "bù zhī chí dà xiǎo"
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
 msgstr "Qiēpiàn hé zhí bùtóng chángdù."
@ -1937,6 +1942,10 @@ msgstr "Wúfǎ dòu qǔ sè tiáo shùjù"
 msgid "Unable to write to nvm."
 msgstr "Wúfǎ xiě rù nvm."
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
 msgstr ""
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
 msgstr "Yìwài de nrfx uuid lèixíng"
@ -2066,6 +2075,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr "WiFi mìmǎ bìxū jiè yú 8 dào 63 gè zìfú zhī jiān"
 #: main.c
 msgid "Woken up by alarm.\n"
 msgstr ""
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr "Tèzhēng bù zhīchí xiě rù"
@ -2148,7 +2161,8 @@ msgstr "cānshù bìxū shì ndarrays"
 msgid "array and index length must be equal"
 msgstr ""
-#: py/objarray.c shared-bindings/nvm/ByteArray.c
+#: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr "yòu cè xūyào shùzǔ/zì jié"
@ -3252,7 +3266,7 @@ msgid "only sample_rate=16000 is supported"
 msgstr "Jǐn zhīchí cǎiyàng lǜ = 16000"
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
-#: shared-bindings/nvm/ByteArray.c
+#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
 msgid "only slices with step=1 (aka None) are supported"
 msgstr "jǐn zhīchí bù zhǎng = 1(jí wú) de qiēpiàn"
@ -3845,6 +3859,9 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr "Àn xià rènhé jiàn jìnrù REPL. Shǐyòng CTRL-D chóngxīn jiāzài."
 #~ msgid "Only IPv4 SOCK_STREAM sockets supported"
 #~ msgstr "Jǐn zhīchí IPv4 SOCK_STREAM tào jiē zì"
--- a/main.c
+++ b/main.c
@ -112,9 +112,6 @@ STATIC void start_mp(supervisor_allocation* heap) {
    reset_status_led();
    autoreload_stop();
    supervisor_workflow_reset();
 #if CIRCUITPY_ALARM
    alarm_reset();
 #endif
    // Stack limit should be less than real stack size, so we have a chance
    // to recover from limit hit.  (Limit is measured in bytes.)
@ -158,6 +155,13 @@ STATIC void start_mp(supervisor_allocation* heap) {
    mp_obj_list_init(mp_sys_argv, 0);
    #if CIRCUITPY_ALARM
    // Record which alarm woke us up, if any. An object may be created so the heap must be functional.
    alarm_save_wakeup_alarm();
    // Reset alarm module only after we retrieved the wakeup alarm.
    alarm_reset();
    #endif
    #if CIRCUITPY_NETWORK
    network_module_init();
    #endif
@ -285,6 +289,7 @@ STATIC bool run_code_py(safe_mode_t safe_mode) {
        filesystem_flush();
        supervisor_allocation* heap = allocate_remaining_memory();
        start_mp(heap);
        found_main = maybe_run_list(supported_filenames, &result);
        #if CIRCUITPY_FULL_BUILD
        if (!found_main){
@ -354,7 +359,6 @@ STATIC bool run_code_py(safe_mode_t safe_mode) {
            serial_write_compressed(translate("Woken up by alarm.\n"));
            board_init();
            supervisor_set_run_reason(RUN_REASON_STARTUP);
            // TODO: Reset any volatile memory the user may have access to.
            return true;
        }
        #endif
--- a/ports/esp32s2/Makefile
+++ b/ports/esp32s2/Makefile
@ -118,7 +118,7 @@ CFLAGS += -DSTACK_CANARY_VALUE=0xa5a5a5a5
 #Debugging/Optimization
 ifeq ($(DEBUG), 1)
-  CFLAGS += -ggdb
+  CFLAGS += -DDEBUG -ggdb
  OPTIMIZATION_FLAGS ?= -Og
  # You may want to enable these flags to make setting breakpoints easier.
  # CFLAGS += -fno-inline -fno-ipa-sra
--- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c
+++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c
@ -115,8 +115,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
    busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
    common_hal_busio_spi_construct(spi, &pin_GPIO36, &pin_GPIO35, NULL);
--- a/ports/esp32s2/boards/electroniccats_bastwifi/board.c
+++ b/ports/esp32s2/boards/electroniccats_bastwifi/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
 }
 bool board_requests_safe_mode(void) {
--- a/ports/esp32s2/boards/espressif_kaluga_1/board.c
+++ b/ports/esp32s2/boards/espressif_kaluga_1/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
 }
 bool board_requests_safe_mode(void) {
--- a/ports/esp32s2/boards/espressif_saola_1_wroom/board.c
+++ b/ports/esp32s2/boards/espressif_saola_1_wroom/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
 }
 bool board_requests_safe_mode(void) {
--- a/ports/esp32s2/boards/espressif_saola_1_wrover/board.c
+++ b/ports/esp32s2/boards/espressif_saola_1_wrover/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
 }
 bool board_requests_safe_mode(void) {
--- a/ports/esp32s2/boards/microdev_micro_s2/board.c
+++ b/ports/esp32s2/boards/microdev_micro_s2/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
    // SPI Flash and RAM
    common_hal_never_reset_pin(&pin_GPIO26);
--- a/ports/esp32s2/boards/muselab_nanoesp32_s2/board.c
+++ b/ports/esp32s2/boards/muselab_nanoesp32_s2/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
 }
 bool board_requests_safe_mode(void) {
--- a/ports/esp32s2/boards/targett_module_clip_wroom/board.c
+++ b/ports/esp32s2/boards/targett_module_clip_wroom/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
    // Crystal
    common_hal_never_reset_pin(&pin_GPIO15);
--- a/ports/esp32s2/boards/targett_module_clip_wrover/board.c
+++ b/ports/esp32s2/boards/targett_module_clip_wrover/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
    //Crystal
    common_hal_never_reset_pin(&pin_GPIO15);
--- a/ports/esp32s2/boards/unexpectedmaker_feathers2/board.c
+++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
    // SPI Flash and RAM
    common_hal_never_reset_pin(&pin_GPIO26);
--- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/board.c
+++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/board.c
@ -34,8 +34,10 @@ void board_init(void) {
    common_hal_never_reset_pin(&pin_GPIO20);
    // Debug UART
 #ifdef DEBUG
    common_hal_never_reset_pin(&pin_GPIO43);
    common_hal_never_reset_pin(&pin_GPIO44);
 #endif /* DEBUG */
    // SPI Flash and RAM
    common_hal_never_reset_pin(&pin_GPIO26);
--- a/ports/esp32s2/common-hal/alarm/SleepMemory.c
+++ b/ports/esp32s2/common-hal/alarm/SleepMemory.c
@ -0,0 +1,66 @@
 /*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2020 microDev
 * Copyright (c) 2020 Dan Halbert for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
 #include <string.h>
 #include "py/runtime.h"
 #include "common-hal/alarm/SleepMemory.h"
 #include "esp_log.h"
 #include "esp_sleep.h"
 // Data storage for singleton instance of SleepMemory.
 // Might be RTC_SLOW_MEM or RTC_FAST_MEM, depending on setting of CONFIG_ESP32S2_RTCDATA_IN_FAST_MEM.
 static RTC_DATA_ATTR uint8_t _sleep_mem[SLEEP_MEMORY_LENGTH];
 void alarm_sleep_memory_reset(void) {
    // ESP-IDF build system takes care of doing esp_sleep_pd_config() or the equivalentwith
    // the correct settings, depending on which RTC mem we are using.
    // https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-reference/system/sleep_modes.html#power-down-of-rtc-peripherals-and-memories
 }
 uint32_t common_hal_alarm_sleep_memory_get_length(alarm_sleep_memory_obj_t *self) {
    return sizeof(_sleep_mem);
 }
 bool common_hal_alarm_sleep_memory_set_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, const uint8_t* values, uint32_t len) {
    if (start_index + len > sizeof(_sleep_mem)) {
        return false;
    }
    memcpy((uint8_t *) (_sleep_mem + start_index), values, len);
    return true;
 }
 void common_hal_alarm_sleep_memory_get_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, uint8_t* values, uint32_t len) {
    if (start_index + len > sizeof(_sleep_mem)) {
        return;
    }
    memcpy(values, (uint8_t *) (_sleep_mem + start_index), len);
 }
--- a/ports/esp32s2/common-hal/alarm/SleepMemory.h
+++ b/ports/esp32s2/common-hal/alarm/SleepMemory.h
@ -0,0 +1,53 @@
 /*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2020 Dan Halbert for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
 #ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM_SLEEPMEMORY_H
 #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM_SLEEPMEMORY_H
 #include "py/obj.h"
 // There are several places we could store persistent data for SleepMemory:
 //
 // RTC registers: There are a few 32-bit registers maintained during deep sleep.
 // We are already using one for saving sleep information during deep sleep.
 //
 // RTC Fast Memory: 8kB, also used for deep-sleep power-on stub.
 // RTC Slow Memory: 8kB, also used for the ULP (tiny co-processor available during sleep).
 //
 // The ESP-IDF build system takes care of the power management of these regions.
 // RTC_DATA_ATTR will allocate storage in RTC_SLOW_MEM unless CONFIG_ESP32S2_RTCDATA_IN_FAST_MEM
 // is set. Any memory not allocated by us can be used by the ESP-IDF for heap or other purposes.
 // Use half of RTC_SLOW_MEM or RTC_FAST_MEM.
 #define SLEEP_MEMORY_LENGTH (4096)
 typedef struct {
    mp_obj_base_t base;
 } alarm_sleep_memory_obj_t;
 extern void alarm_sleep_memory_reset(void);
 #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM_SLEEPMEMORY_H
--- a/ports/esp32s2/common-hal/alarm/init.c
+++ b/ports/esp32s2/common-hal/alarm/init.c
@ -1,10 +1,10 @@
- /*
+/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
- * Copyright (c) 2016 Scott Shawcroft for Adafruit Industries
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
- * Copyright (c) 2019 Lucian Copeland for Adafruit Industries
+ * Copyright (c) 2020 Dan Halbert for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
@ -30,6 +30,7 @@
 #include "py/runtime.h"
 #include "shared-bindings/alarm/pin/PinAlarm.h"
 #include "shared-bindings/alarm/SleepMemory.h"
 #include "shared-bindings/alarm/time/TimeAlarm.h"
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/wifi/__init__.h"
@ -41,8 +42,17 @@
 #include "esp_sleep.h"
 // Singleton instance of SleepMemory.
 const alarm_sleep_memory_obj_t alarm_sleep_memory_obj = {
    .base = {
        .type = &alarm_sleep_memory_type,
    },
 };
 void alarm_reset(void) {
    alarm_time_timealarm_reset();
    alarm_sleep_memory_reset();
    esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_ALL);
 }
--- a/ports/esp32s2/common-hal/alarm/init.h
+++ b/ports/esp32s2/common-hal/alarm/init.h
@ -27,6 +27,10 @@
 #ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM__INIT__H
 #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM__INIT__H
-void alarm_reset(void);
+#include "common-hal/alarm/SleepMemory.h"
 const alarm_sleep_memory_obj_t alarm_sleep_memory_obj;
 extern void alarm_reset(void);
 #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_ALARM__INIT__H
--- a/ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
+++ b/ports/esp32s2/common-hal/alarm/time/TimeAlarm.c
@ -52,6 +52,7 @@ mp_obj_t alarm_time_timealarm_get_wakeup_alarm(size_t n_alarms, const mp_obj_t *
    alarm_time_time_alarm_obj_t *timer = m_new_obj(alarm_time_time_alarm_obj_t);
    timer->base.type = &alarm_time_time_alarm_type;
    // TODO: Set monotonic_time based on the RTC state.
    timer->monotonic_time = 0.0f;
    return timer;
 }
--- a/ports/esp32s2/common-hal/microcontroller/Pin.c
+++ b/ports/esp32s2/common-hal/microcontroller/Pin.c
@ -44,6 +44,20 @@ STATIC uint32_t in_use[2];
 bool apa102_mosi_in_use;
 bool apa102_sck_in_use;
 STATIC void floating_gpio_reset(gpio_num_t pin_number) {
    // This is the same as gpio_reset_pin(), but without the pullup.
    // Note that gpio_config resets the iomatrix to GPIO_FUNC as well.
    gpio_config_t cfg = {
        .pin_bit_mask = BIT64(pin_number),
        .mode = GPIO_MODE_DISABLE,
        .pull_up_en = false,
        .pull_down_en = false,
        .intr_type = GPIO_INTR_DISABLE,
    };
    gpio_config(&cfg);
    PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[pin_number], 0);
 }
 void never_reset_pin_number(gpio_num_t pin_number) {
    if (pin_number == -1 ) {
         return;
@ -63,6 +77,8 @@ void reset_pin_number(gpio_num_t pin_number) {
    never_reset_pins[pin_number / 32] &= ~(1 << pin_number % 32);
    in_use[pin_number / 32] &= ~(1 << pin_number % 32);
    floating_gpio_reset(pin_number);
    #ifdef MICROPY_HW_NEOPIXEL
    if (pin_number == MICROPY_HW_NEOPIXEL->number) {
        neopixel_in_use = false;
@ -83,9 +99,7 @@ void reset_all_pins(void) {
            (never_reset_pins[i / 32] & (1 << i % 32)) != 0) {
            continue;
        }
-        gpio_set_direction(i, GPIO_MODE_DEF_INPUT);
+        floating_gpio_reset(i);
        gpio_pullup_dis(i);
        gpio_pulldown_dis(i);
    }
    in_use[0] = 0;
    in_use[1] = 0;
--- a/ports/esp32s2/common-hal/wifi/Radio.c
+++ b/ports/esp32s2/common-hal/wifi/Radio.c
@ -105,6 +105,10 @@ mp_obj_t common_hal_wifi_radio_start_scanning_networks(wifi_radio_obj_t *self) {
 }
 void common_hal_wifi_radio_stop_scanning_networks(wifi_radio_obj_t *self) {
    // Return early if self->current_scan is NULL to avoid hang
    if (self->current_scan == NULL) {
        return;
    }
    // Free the memory used to store the found aps.
    wifi_scannednetworks_deinit(self->current_scan);
    self->current_scan = NULL;
--- a/py/circuitpy_defns.mk
+++ b/py/circuitpy_defns.mk
@ -304,6 +304,7 @@ SRC_COMMON_HAL_ALL = \
 	_bleio/__init__.c \
 	_pew/PewPew.c \
 	_pew/__init__.c \
 	alarm/SleepMemory.c \
 	alarm/__init__.c \
 	alarm/pin/PinAlarm.c \
 	alarm/time/TimeAlarm.c \
--- a/py/obj.c
+++ b/py/obj.c
@ -125,7 +125,6 @@ void mp_obj_print_exception(const mp_print_t *print, mp_obj_t exc) {
                    mp_printf(print, decompressed_block, block);
                }
            }
            mp_obj_exception_clear_traceback(exc);
        }
    }
    mp_obj_print_helper(print, exc, PRINT_EXC);
--- a/shared-bindings/alarm/SleepMemory.c
+++ b/shared-bindings/alarm/SleepMemory.c
@ -0,0 +1,159 @@
 /*
 * This file is part of the Micro Python project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
 * Copyright (c) 2020 Dan Halbert for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
 #include "py/binary.h"
 #include "py/objproperty.h"
 #include "py/runtime.h"
 #include "py/runtime0.h"
 #include "shared-bindings/alarm/SleepMemory.h"
 #include "supervisor/shared/translate.h"
 //| class SleepMemory:
 //|     """Store raw bytes in RAM that persists during deep sleep.
 //|     The class acts as a ``bytearray``.
 //|     If power is lost, the memory contents are lost.
 //|
 //|     Note that this class can't be imported and used directly. The sole
 //|     instance of :class:`SleepMemory` is available at
 //|     :attr:`alarm.sleep_memory`.
 //|
 //|     Usage::
 //|
 //|        import alarm
 //|        alarm.sleep_memory[0] = True
 //|        alarm.sleep_memory[1] = 12
 //|     """
 //|     def __init__(self) -> None:
 //|         """Not used. Access the sole instance through `alarm.sleep_memory`."""
 //|         ...
 //|
 STATIC const mp_rom_map_elem_t alarm_sleep_memory_locals_dict_table[] = {
 };
 STATIC MP_DEFINE_CONST_DICT(alarm_sleep_memory_locals_dict, alarm_sleep_memory_locals_dict_table);
 //|     @overload
 //|     def __getitem__(self, index: slice) -> bytearray: ...
 //|     @overload
 //|     def __getitem__(self, index: int) -> int:
 //|         """Returns the value at the given index."""
 //|         ...
 //|
 //|     @overload
 //|     def __setitem__(self, index: slice, value: ReadableBuffer) -> None: ...
 //|     @overload
 //|     def __setitem__(self, index: int, value: int) -> None:
 //|         """Set the value at the given index."""
 //|         ...
 //|
 STATIC mp_obj_t alarm_sleep_memory_subscr(mp_obj_t self_in, mp_obj_t index_in, mp_obj_t value) {
    if (value == MP_OBJ_NULL) {
        // delete item
        // slice deletion
        return MP_OBJ_NULL; // op not supported
    } else {
        alarm_sleep_memory_obj_t *self = MP_OBJ_TO_PTR(self_in);
        if (0) {
 #if MICROPY_PY_BUILTINS_SLICE
        } else if (MP_OBJ_IS_TYPE(index_in, &mp_type_slice)) {
            mp_bound_slice_t slice;
            if (!mp_seq_get_fast_slice_indexes(common_hal_alarm_sleep_memory_get_length(self), index_in, &slice)) {
                mp_raise_NotImplementedError(translate("only slices with step=1 (aka None) are supported"));
            }
            if (value != MP_OBJ_SENTINEL) {
                #if MICROPY_PY_ARRAY_SLICE_ASSIGN
                // Assign
                size_t src_len = slice.stop - slice.start;
                uint8_t* src_items;
                if (MP_OBJ_IS_TYPE(value, &mp_type_array) ||
                        MP_OBJ_IS_TYPE(value, &mp_type_bytearray) ||
                        MP_OBJ_IS_TYPE(value, &mp_type_memoryview) ||
                        MP_OBJ_IS_TYPE(value, &mp_type_bytes)) {
                    mp_buffer_info_t bufinfo;
                    mp_get_buffer_raise(value, &bufinfo, MP_BUFFER_READ);
                    if (bufinfo.len != src_len) {
                        mp_raise_ValueError(translate("Slice and value different lengths."));
                    }
                    src_len = bufinfo.len;
                    src_items = bufinfo.buf;
                    if (1 != mp_binary_get_size('@', bufinfo.typecode, NULL)) {
                        mp_raise_ValueError(translate("Array values should be single bytes."));
                    }
                } else {
                    mp_raise_NotImplementedError(translate("array/bytes required on right side"));
                }
                if (!common_hal_alarm_sleep_memory_set_bytes(self, slice.start, src_items, src_len)) {
                    mp_raise_RuntimeError(translate("Unable to write to sleep_memory."));
                }
                return mp_const_none;
                #else
                return MP_OBJ_NULL; // op not supported
                #endif
            } else {
                // Read slice.
                size_t len = slice.stop - slice.start;
                uint8_t *items = m_new(uint8_t, len);
                common_hal_alarm_sleep_memory_get_bytes(self, slice.start, items, len);
                return mp_obj_new_bytearray_by_ref(len, items);
            }
 #endif
        } else {
            // Single index rather than slice.
            size_t index = mp_get_index(self->base.type, common_hal_alarm_sleep_memory_get_length(self),
                    index_in, false);
            if (value == MP_OBJ_SENTINEL) {
                // load
                uint8_t value_out;
                common_hal_alarm_sleep_memory_get_bytes(self, index, &value_out, 1);
                return MP_OBJ_NEW_SMALL_INT(value_out);
            } else {
                // store
                mp_int_t byte_value = mp_obj_get_int(value);
                if (byte_value > 0xff || byte_value < 0) {
                    mp_raise_ValueError(translate("Bytes must be between 0 and 255."));
                }
                uint8_t short_value = byte_value;
                if (!common_hal_alarm_sleep_memory_set_bytes(self, index, &short_value, 1)) {
                    mp_raise_RuntimeError(translate("Unable to write to sleep_memory."));
                }
                return mp_const_none;
            }
        }
    }
 }
 const mp_obj_type_t alarm_sleep_memory_type = {
    { &mp_type_type },
    .name = MP_QSTR_SleepMemory,
    .subscr = alarm_sleep_memory_subscr,
    .print = NULL,
    .locals_dict = (mp_obj_t)&alarm_sleep_memory_locals_dict,
 };
--- a/shared-bindings/alarm/SleepMemory.h
+++ b/shared-bindings/alarm/SleepMemory.h
@ -0,0 +1,40 @@
 /*
 * This file is part of the Micro Python project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
 * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
 #ifndef MICROPY_INCLUDED_SHARED_BINDINGS_ALARM_SLEEPMEMORY_H
 #define MICROPY_INCLUDED_SHARED_BINDINGS_ALARM_SLEEPMEMORY_H
 #include "common-hal/alarm/SleepMemory.h"
 extern const mp_obj_type_t alarm_sleep_memory_type;
 uint32_t common_hal_alarm_sleep_memory_get_length(alarm_sleep_memory_obj_t *self);
 bool common_hal_alarm_sleep_memory_set_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, const uint8_t* values, uint32_t len);
 void common_hal_alarm_sleep_memory_get_bytes(alarm_sleep_memory_obj_t *self, uint32_t start_index, uint8_t* values, uint32_t len);
 #endif  // MICROPY_INCLUDED_SHARED_BINDINGS_ALARM_SLEEPMEMORY_H
--- a/shared-bindings/alarm/init.c
+++ b/shared-bindings/alarm/init.c
@ -29,6 +29,7 @@
 #include "py/runtime.h"
 #include "shared-bindings/alarm/__init__.h"
 #include "shared-bindings/alarm/SleepMemory.h"
 #include "shared-bindings/alarm/pin/PinAlarm.h"
 #include "shared-bindings/alarm/time/TimeAlarm.h"
 #include "shared-bindings/supervisor/Runtime.h"
@ -57,7 +58,11 @@
 //| maintaining the connection takes priority and power consumption may not be reduced.
 //| """
 //| sleep_memory: SleepMemory
 //| """Memory that persists during deep sleep.
 //| This object is the sole instance of `alarm.SleepMemory`."""
 //|
 //| wake_alarm: Alarm
 //| """The most recently triggered alarm. If CircuitPython was sleeping, the alarm the woke it from sleep."""
 //|
@ -177,6 +182,7 @@ STATIC const mp_obj_module_t alarm_time_module = {
    .globals = (mp_obj_dict_t*)&alarm_time_globals,
 };
 // The module table is mutable because .wake_alarm is a mutable attribute.
 STATIC mp_map_elem_t alarm_module_globals_table[] = {
    { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_alarm) },
@ -188,12 +194,14 @@ STATIC mp_map_elem_t alarm_module_globals_table[] = {
                                               MP_OBJ_FROM_PTR(&alarm_exit_and_deep_sleep_until_alarms_obj) },
    { MP_ROM_QSTR(MP_QSTR_pin), MP_OBJ_FROM_PTR(&alarm_pin_module) },
-    { MP_ROM_QSTR(MP_QSTR_time), MP_OBJ_FROM_PTR(&alarm_time_module) }
+    { MP_ROM_QSTR(MP_QSTR_time), MP_OBJ_FROM_PTR(&alarm_time_module) },
    { MP_ROM_QSTR(MP_QSTR_SleepMemory),   MP_OBJ_FROM_PTR(&alarm_sleep_memory_type) },
    { MP_ROM_QSTR(MP_QSTR_sleep_memory),  MP_OBJ_FROM_PTR(&alarm_sleep_memory_obj) },
 };
 STATIC MP_DEFINE_MUTABLE_DICT(alarm_module_globals, alarm_module_globals_table);
-void common_hal_alarm_set_wake_alarm(mp_obj_t alarm) {
+STATIC void alarm_set_wake_alarm(mp_obj_t alarm) {
    // Equivalent of:
    // alarm.wake_alarm = alarm
    mp_map_elem_t *elem =
@ -203,6 +211,11 @@ void common_hal_alarm_set_wake_alarm(mp_obj_t alarm) {
    }
 }
 // Initialize .wake_alarm value.
 void alarm_save_wakeup_alarm(void) {
    alarm_set_wake_alarm(common_hal_alarm_get_wake_alarm());
 }
 const mp_obj_module_t alarm_module = {
    .base = { &mp_type_module },
    .globals = (mp_obj_dict_t*)&alarm_module_globals,
--- a/shared-bindings/alarm/init.h
+++ b/shared-bindings/alarm/init.h
@ -43,8 +43,11 @@ extern void common_hal_alarm_set_deep_sleep_alarms(size_t n_alarms, const mp_obj
 // Deep sleep is entered outside of the VM so we omit the `common_hal_` prefix.
 extern NORETURN void alarm_enter_deep_sleep(void);
 extern mp_obj_t common_hal_alarm_get_wake_alarm(void);
 // Used by wake-up code.
-extern void common_hal_alarm_set_wake_alarm(mp_obj_t alarm);
+void alarm_save_wakeup_alarm(void);
 // True if an alarm is alerting. This is most useful for pretend deep sleep.
 extern bool alarm_woken_from_sleep(void);