From 38a718ff5558c2286172091615aaeb2ded5f70f5 Mon Sep 17 00:00:00 2001 From: Jeff Epler Date: Tue, 17 Mar 2020 16:41:09 -0500 Subject: [PATCH] Translations: follow stm port rename, run 'make translate' --- Makefile | 2 +- locale/ID.po | 182 ++++++++++++++++++++++++- locale/circuitpython.pot | 182 ++++++++++++++++++++++++- locale/de_DE.po | 182 ++++++++++++++++++++++++- locale/en_US.po | 182 ++++++++++++++++++++++++- locale/en_x_pirate.po | 182 ++++++++++++++++++++++++- locale/es.po | 182 ++++++++++++++++++++++++- locale/fil.po | 182 ++++++++++++++++++++++++- locale/fr.po | 182 ++++++++++++++++++++++++- locale/it_IT.po | 182 ++++++++++++++++++++++++- locale/ko.po | 182 ++++++++++++++++++++++++- locale/pl.po | 182 ++++++++++++++++++++++++- locale/pt_BR.po | 182 ++++++++++++++++++++++++- locale/zh_Latn_pinyin.po | 287 ++++++++++++++++++++++++--------------- 14 files changed, 2276 insertions(+), 197 deletions(-) diff --git a/Makefile b/Makefile index 7eff665c08..5e949cd40f 100644 --- a/Makefile +++ b/Makefile @@ -36,7 +36,7 @@ ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(BASEOPTS) # the i18n builder cannot share the environment and doctrees with the others I18NSPHINXOPTS = $(BASEOPTS) -TRANSLATE_SOURCES = extmod lib main.c ports/atmel-samd ports/cxd56 ports/mimxrt10xx ports/nrf ports/stm32f4 py shared-bindings shared-module supervisor +TRANSLATE_SOURCES = extmod lib main.c ports/atmel-samd ports/cxd56 ports/mimxrt10xx ports/nrf ports/stm py shared-bindings shared-module supervisor .PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext stubs diff --git a/locale/ID.po b/locale/ID.po index 12d7b52fbf..b68e9d0902 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -482,6 +482,10 @@ msgstr "" msgid "Cannot unambiguously get sizeof scalar" msgstr "tidak dapat mendapatkan ukuran scalar secara tidak ambigu" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "" @@ -539,6 +543,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "Tidak dapat menginisialisasi UART" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -561,6 +593,14 @@ msgstr "" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC sudah digunakan" @@ -669,6 +709,7 @@ msgstr "Gagal untuk mengalokasikan buffer RX" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Gagal untuk megalokasikan buffer RX dari %d byte" @@ -702,6 +743,10 @@ msgstr "" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -716,10 +761,22 @@ msgstr "" msgid "Group full" msgstr "" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "operasi I/O pada file tertutup" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "operasi I2C tidak didukung" @@ -746,16 +803,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "%q pada tidak valid" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -765,11 +834,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Frekuensi PWM tidak valid" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -781,7 +850,7 @@ msgstr "" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Ukuran buffer tidak valid" @@ -809,6 +878,10 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -844,6 +917,10 @@ msgstr "Pin untuk channel kanan tidak valid" msgid "Invalid pins" msgstr "Pin-pin tidak valid" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" @@ -872,6 +949,10 @@ msgstr "" msgid "Invalid wave file" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "LHS dari keyword arg harus menjadi sebuah id" @@ -917,10 +998,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -934,6 +1023,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip" @@ -942,13 +1032,23 @@ msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip" msgid "No DMA channel found" msgstr "tidak ada channel DMA ditemukan" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Tidak pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Tidak ada pin TX" @@ -977,6 +1077,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "Tidak ada dukungan hardware untuk pin" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1045,6 +1149,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1056,9 +1161,14 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "Tambahkan module apapun pada filesystem\n" @@ -1081,6 +1191,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1095,10 +1217,14 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "" @@ -1137,6 +1263,14 @@ msgstr "" msgid "SDA or SCL needs a pull up" msgstr "SDA atau SCL membutuhkan pull up" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1184,6 +1318,14 @@ msgstr "" msgid "Stream missing readinto() or write() method." msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1257,6 +1399,26 @@ msgstr "" msgid "Tuple or struct_time argument required" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "" @@ -1373,6 +1535,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n" @@ -2073,7 +2239,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index keluar dari jangkauan" @@ -2564,6 +2731,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "Muncul dari PulseIn yang kosong" diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index c9bad41d01..352178a93f 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -472,6 +472,10 @@ msgstr "" msgid "Cannot unambiguously get sizeof scalar" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "" @@ -529,6 +533,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -551,6 +583,14 @@ msgstr "" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "" @@ -658,6 +698,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" @@ -691,6 +732,10 @@ msgstr "" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -705,10 +750,22 @@ msgstr "" msgid "Group full" msgstr "" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "" @@ -735,16 +792,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -754,11 +823,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -770,7 +839,7 @@ msgstr "" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "" @@ -798,6 +867,10 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -833,6 +906,10 @@ msgstr "" msgid "Invalid pins" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" @@ -861,6 +938,10 @@ msgstr "" msgid "Invalid wave file" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" @@ -906,10 +987,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -923,6 +1012,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -931,13 +1021,23 @@ msgstr "" msgid "No DMA channel found" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -966,6 +1066,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1033,6 +1137,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1044,9 +1149,14 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "" @@ -1067,6 +1177,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1081,10 +1203,14 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "" @@ -1121,6 +1247,14 @@ msgstr "" msgid "SDA or SCL needs a pull up" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1168,6 +1302,14 @@ msgstr "" msgid "Stream missing readinto() or write() method." msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1241,6 +1383,26 @@ msgstr "" msgid "Tuple or struct_time argument required" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "" @@ -1356,6 +1518,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "" @@ -2049,7 +2215,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -2539,6 +2706,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index eb2170b81b..3794537a96 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2018-07-27 11:55-0700\n" "Last-Translator: Pascal Deneaux\n" "Language-Team: Sebastian Plamauer, Pascal Deneaux\n" @@ -476,6 +476,10 @@ msgstr "Übertragung ohne MOSI- und MISO-Pins nicht möglich." msgid "Cannot unambiguously get sizeof scalar" msgstr "sizeof scalar kann nicht eindeutig bestimmt werden" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Kann nicht ohne MOSI-Pin schreiben." @@ -533,6 +537,34 @@ msgstr "Beschädigter raw code" msgid "Could not initialize UART" msgstr "Konnte UART nicht initialisieren" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -555,6 +587,14 @@ msgstr "Konnte second buffer nicht zuteilen" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC wird schon benutzt" @@ -662,6 +702,7 @@ msgstr "Konnte keinen RX Buffer allozieren" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Konnte keine RX Buffer mit %d allozieren" @@ -697,6 +738,10 @@ msgstr "" "Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme " "angehalten." +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -711,10 +756,22 @@ msgstr "Gruppe schon benutzt" msgid "Group full" msgstr "Gruppe voll" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Lese/Schreibe-operation an geschlossener Datei" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "I2C-operation nicht unterstützt" @@ -743,16 +800,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Ungültiger %q pin" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Ungültige BMP-Datei" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -762,11 +831,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Ungültige PWM Frequenz" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -778,7 +847,7 @@ msgstr "Ungültiges Argument" msgid "Invalid bits per value" msgstr "Ungültige Bits pro Wert" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Ungültige Puffergröße" @@ -806,6 +875,10 @@ msgstr "Ungültige Datei" msgid "Invalid format chunk size" msgstr "Ungültige format chunk size" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -841,6 +914,10 @@ msgstr "Ungültiger Pin für rechten Kanal" msgid "Invalid pins" msgstr "Ungültige Pins" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "Ungültige Polarität" @@ -869,6 +946,10 @@ msgstr "Ungültige Anzahl von Stimmen" msgid "Invalid wave file" msgstr "Ungültige wave Datei" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "LHS des Schlüsselwortarguments muss eine id sein" @@ -915,10 +996,18 @@ msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" "Die Startverzögerung des Mikrofons muss im Bereich von 0,0 bis 1,0 liegen" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Muss eine %q Unterklasse sein." +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -932,6 +1021,7 @@ msgid "No CCCD for this Characteristic" msgstr "Kein CCCD für diese Charakteristik" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Kein DAC im Chip vorhanden" @@ -940,13 +1030,23 @@ msgstr "Kein DAC im Chip vorhanden" msgid "No DMA channel found" msgstr "Kein DMA Kanal gefunden" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Kein RX Pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Kein TX Pin" @@ -975,6 +1075,10 @@ msgstr "Keine Hardwareunterstützung am clk Pin" msgid "No hardware support on pin" msgstr "Keine Hardwareunterstützung an diesem Pin" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Kein Pulldown Widerstand am Pin; 1Mohm wird vorgeschlagen" @@ -1048,6 +1152,7 @@ msgid "" msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1059,9 +1164,14 @@ msgstr "Zugang verweigert" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin hat keine ADC Funktionalität" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "und alle Module im Dateisystem \n" @@ -1084,6 +1194,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull wird nicht verwendet, wenn die Richtung output ist." +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1098,10 +1220,14 @@ msgid "RTC is not supported on this board" msgstr "Eine RTC wird auf diesem Board nicht unterstützt" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Nur lesen möglich, da Schreibgeschützt" @@ -1138,6 +1264,14 @@ msgstr "Sicherheitsmodus aktiv! Gespeicherter Code wird nicht ausgeführt\n" msgid "SDA or SCL needs a pull up" msgstr "SDA oder SCL brauchen pull up" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Abtastrate muss positiv sein" @@ -1185,6 +1319,14 @@ msgstr "Die Stackgröße sollte mindestens 256 sein" msgid "Stream missing readinto() or write() method." msgstr "Stream fehlt readinto() oder write() Methode." +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1260,6 +1402,26 @@ msgstr "Zurückverfolgung (jüngste Aufforderung zuletzt):\n" msgid "Tuple or struct_time argument required" msgstr "Tuple- oder struct_time-Argument erforderlich" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB beschäftigt" @@ -1377,6 +1539,10 @@ msgstr "Länge des Wertes > max_length" msgid "Viper functions don't currently support more than 4 arguments" msgstr "Viper-Funktionen unterstützen derzeit nicht mehr als 4 Argumente" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "" @@ -2079,7 +2245,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index außerhalb der Reichweite" @@ -2577,6 +2744,7 @@ msgstr "pixel_shader muss displayio.Palette oder displayio.ColorConverter sein" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "pop von einem leeren PulseIn" diff --git a/locale/en_US.po b/locale/en_US.po index 217ce444bf..9d88663aac 100644 --- a/locale/en_US.po +++ b/locale/en_US.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2018-07-27 11:55-0700\n" "Last-Translator: \n" "Language-Team: \n" @@ -472,6 +472,10 @@ msgstr "" msgid "Cannot unambiguously get sizeof scalar" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "" @@ -529,6 +533,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -551,6 +583,14 @@ msgstr "" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "" @@ -658,6 +698,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" @@ -691,6 +732,10 @@ msgstr "" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -705,10 +750,22 @@ msgstr "" msgid "Group full" msgstr "" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "" @@ -735,16 +792,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -754,11 +823,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -770,7 +839,7 @@ msgstr "" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "" @@ -798,6 +867,10 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -833,6 +906,10 @@ msgstr "" msgid "Invalid pins" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" @@ -861,6 +938,10 @@ msgstr "" msgid "Invalid wave file" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" @@ -906,10 +987,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -923,6 +1012,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -931,13 +1021,23 @@ msgstr "" msgid "No DMA channel found" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -966,6 +1066,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1033,6 +1137,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1044,9 +1149,14 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "" @@ -1067,6 +1177,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1081,10 +1203,14 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "" @@ -1121,6 +1247,14 @@ msgstr "" msgid "SDA or SCL needs a pull up" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1168,6 +1302,14 @@ msgstr "" msgid "Stream missing readinto() or write() method." msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1241,6 +1383,26 @@ msgstr "" msgid "Tuple or struct_time argument required" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "" @@ -1356,6 +1518,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "" @@ -2049,7 +2215,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -2539,6 +2706,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" diff --git a/locale/en_x_pirate.po b/locale/en_x_pirate.po index f911817076..e5b135bf02 100644 --- a/locale/en_x_pirate.po +++ b/locale/en_x_pirate.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2018-07-27 11:55-0700\n" "Last-Translator: \n" "Language-Team: @sommersoft, @MrCertainly\n" @@ -476,6 +476,10 @@ msgstr "" msgid "Cannot unambiguously get sizeof scalar" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "" @@ -533,6 +537,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -555,6 +587,14 @@ msgstr "" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "" @@ -662,6 +702,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" @@ -695,6 +736,10 @@ msgstr "" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -709,10 +754,22 @@ msgstr "" msgid "Group full" msgstr "" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "" @@ -739,16 +796,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Avast! %q pin be invalid" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -758,11 +827,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -774,7 +843,7 @@ msgstr "" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "" @@ -802,6 +871,10 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -837,6 +910,10 @@ msgstr "Belay that! Invalid pin for starboard-side channel" msgid "Invalid pins" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" @@ -865,6 +942,10 @@ msgstr "" msgid "Invalid wave file" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" @@ -910,10 +991,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -927,6 +1016,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Shiver me timbers! There be no DAC on this chip" @@ -935,13 +1025,23 @@ msgstr "Shiver me timbers! There be no DAC on this chip" msgid "No DMA channel found" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -970,6 +1070,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1037,6 +1141,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1048,9 +1153,14 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Belay that! Th' Pin be not ADC capable" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "" @@ -1071,6 +1181,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1085,10 +1207,14 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "" @@ -1125,6 +1251,14 @@ msgstr "Runnin' in safe mode! Nay runnin' saved code.\n" msgid "SDA or SCL needs a pull up" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1172,6 +1306,14 @@ msgstr "" msgid "Stream missing readinto() or write() method." msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1245,6 +1387,26 @@ msgstr "" msgid "Tuple or struct_time argument required" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "" @@ -1360,6 +1522,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "Blimey! Yer code filename has two extensions\n" @@ -2053,7 +2219,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -2543,6 +2710,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" diff --git a/locale/es.po b/locale/es.po index 20bfbdd3ac..214496ed38 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2018-08-24 22:56-0500\n" "Last-Translator: \n" "Language-Team: \n" @@ -478,6 +478,10 @@ msgstr "No se puede transmitir sin pines MOSI y MISO." msgid "Cannot unambiguously get sizeof scalar" msgstr "No se puede obtener inequívocamente sizeof escalar" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "No se puede escribir sin pin MOSI." @@ -535,6 +539,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "No se puede inicializar la UART" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -557,6 +589,14 @@ msgstr "No se pudo asignar el segundo buffer" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC ya está siendo utilizado" @@ -664,6 +704,7 @@ msgstr "Ha fallado la asignación del buffer RX" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Falló la asignación del buffer RX de %d bytes" @@ -697,6 +738,10 @@ msgstr "El archivo ya existe" msgid "Frequency captured is above capability. Capture Paused." msgstr "Frecuencia capturada por encima de la capacidad. Captura en pausa." +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -711,10 +756,22 @@ msgstr "" msgid "Group full" msgstr "Group lleno" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Operación I/O en archivo cerrado" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "operación I2C no soportada" @@ -743,16 +800,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Pin %q inválido" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Archivo BMP inválido" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -762,11 +831,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Frecuencia PWM inválida" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -778,7 +847,7 @@ msgstr "Argumento inválido" msgid "Invalid bits per value" msgstr "Inválido bits por valor" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Tamaño de buffer inválido" @@ -806,6 +875,10 @@ msgstr "Archivo inválido" msgid "Invalid format chunk size" msgstr "Formato de fragmento de formato no válido" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -841,6 +914,10 @@ msgstr "Pin inválido para canal derecho" msgid "Invalid pins" msgstr "pines inválidos" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "Polaridad inválida" @@ -869,6 +946,10 @@ msgstr "Cuenta de voces inválida" msgid "Invalid wave file" msgstr "Archivo wave inválido" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "LHS del agumento por palabra clave deberia ser un identificador" @@ -914,10 +995,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Micrófono demora de inicio debe estar en el rango 0.0 a 1.0" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Debe de ser una subclase de %q" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -931,6 +1020,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "El chip no tiene DAC" @@ -939,13 +1029,23 @@ msgstr "El chip no tiene DAC" msgid "No DMA channel found" msgstr "No se encontró el canal DMA" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Sin pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Sin pin TX" @@ -974,6 +1074,10 @@ msgstr "Sin soporte de hardware en el pin clk" msgid "No hardware support on pin" msgstr "Sin soporte de hardware en pin" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1047,6 +1151,7 @@ msgstr "" "construcion" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1058,9 +1163,14 @@ msgstr "Permiso denegado" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin no tiene capacidad ADC" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c #, fuzzy msgid "Plus any modules on the filesystem\n" @@ -1083,6 +1193,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull no se usa cuando la dirección es output." +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1097,10 +1219,14 @@ msgid "RTC is not supported on this board" msgstr "RTC no soportado en esta placa" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Solo-lectura" @@ -1138,6 +1264,14 @@ msgstr "Ejecutando en modo seguro! No se esta ejecutando el código guardado.\n" msgid "SDA or SCL needs a pull up" msgstr "SDA o SCL necesitan una pull up" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate debe ser positivo" @@ -1185,6 +1319,14 @@ msgstr "El tamaño de la pila debe ser de al menos 256" msgid "Stream missing readinto() or write() method." msgstr "A Stream le falta el método readinto() o write()." +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1258,6 +1400,26 @@ msgstr "Traceback (ultima llamada reciente):\n" msgid "Tuple or struct_time argument required" msgstr "Argumento tuple o struct_time requerido" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB ocupado" @@ -1374,6 +1536,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "funciones Viper actualmente no soportan más de 4 argumentos." +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "ADVERTENCIA: El nombre de archivo de tu código tiene dos extensiones\n" @@ -2080,7 +2246,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index fuera de rango" @@ -2577,6 +2744,7 @@ msgstr "pixel_shader debe ser displayio.Palette o displayio.ColorConverter" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "pop de un PulseIn vacío" diff --git a/locale/fil.po b/locale/fil.po index 838089dbdc..43fd086866 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -480,6 +480,10 @@ msgstr "Hindi maaaring ilipat kapag walang MOSI at MISO pin." msgid "Cannot unambiguously get sizeof scalar" msgstr "Hindi puedeng hindi sigurado ang get sizeof scalar" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Hindi maaring isulat kapag walang MOSI pin." @@ -538,6 +542,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "Hindi ma-initialize ang UART" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -560,6 +592,14 @@ msgstr "Hindi ma-iallocate ang second buffer" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "Ginagamit na ang DAC" @@ -672,6 +712,7 @@ msgstr "Nabigong ilaan ang RX buffer" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Nabigong ilaan ang RX buffer ng %d bytes" @@ -705,6 +746,10 @@ msgstr "Mayroong file" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -719,10 +764,22 @@ msgstr "" msgid "Group full" msgstr "Puno ang group" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "I/O operasyon sa saradong file" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "Hindi supportado ang operasyong I2C" @@ -751,16 +808,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Mali ang %q pin" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Mali ang BMP file" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -770,11 +839,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Mali ang PWM frequency" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -786,7 +855,7 @@ msgstr "Maling argumento" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Mali ang buffer size" @@ -814,6 +883,10 @@ msgstr "Mali ang file" msgid "Invalid format chunk size" msgstr "Mali ang format ng chunk size" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -849,6 +922,10 @@ msgstr "Mali ang pin para sa kanang channel" msgid "Invalid pins" msgstr "Mali ang pins" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "Mali ang polarity" @@ -877,6 +954,10 @@ msgstr "Maling bilang ng voice" msgid "Invalid wave file" msgstr "May hindi tama sa wave file" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "LHS ng keyword arg ay dapat na id" @@ -922,10 +1003,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Ang delay ng startup ng mikropono ay dapat na nasa 0.0 hanggang 1.0" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -939,6 +1028,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Walang DAC sa chip" @@ -947,13 +1037,23 @@ msgstr "Walang DAC sa chip" msgid "No DMA channel found" msgstr "Walang DMA channel na mahanap" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Walang RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Walang TX pin" @@ -982,6 +1082,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "Walang support sa hardware ang pin" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1053,6 +1157,7 @@ msgstr "" "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1064,9 +1169,14 @@ msgstr "Walang pahintulot" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Ang pin ay walang kakayahan sa ADC" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "Kasama ang kung ano pang modules na sa filesystem\n" @@ -1089,6 +1199,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull hindi ginagamit kapag ang direksyon ay output." +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1103,10 +1225,14 @@ msgid "RTC is not supported on this board" msgstr "Hindi supportado ang RTC sa board na ito" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Basahin-lamang" @@ -1144,6 +1270,14 @@ msgstr "Tumatakbo sa safe mode! Hindi tumatakbo ang nai-save na code.\n" msgid "SDA or SCL needs a pull up" msgstr "Kailangan ng pull up resistors ang SDA o SCL" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate ay dapat positibo" @@ -1191,6 +1325,14 @@ msgstr "Ang laki ng stack ay dapat na hindi bababa sa 256" msgid "Stream missing readinto() or write() method." msgstr "Stream kulang ng readinto() o write() method." +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1264,6 +1406,26 @@ msgstr "Traceback (pinakahuling huling tawag): \n" msgid "Tuple or struct_time argument required" msgstr "Tuple o struct_time argument kailangan" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "Busy ang USB" @@ -1383,6 +1545,10 @@ msgstr "" "Ang mga function ng Viper ay kasalukuyang hindi sumusuporta sa higit sa 4 na " "argumento" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "BABALA: Ang pangalan ng file ay may dalawang extension\n" @@ -2095,7 +2261,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index wala sa sakop" @@ -2591,6 +2758,7 @@ msgstr "pixel_shader ay dapat displayio.Palette o displayio.ColorConverter" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "pop mula sa walang laman na PulseIn" diff --git a/locale/fr.po b/locale/fr.po index 46366fe295..aab2f8d49b 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2019-04-14 20:05+0100\n" "Last-Translator: Pierrick Couturier \n" "Language-Team: fr\n" @@ -485,6 +485,10 @@ msgstr "Pas de transfert sans broches MOSI et MISO." msgid "Cannot unambiguously get sizeof scalar" msgstr "Impossible d'obtenir la taille du scalaire sans ambigüité" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Impossible d'écrire sans broche MOSI." @@ -543,6 +547,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "L'UART n'a pu être initialisé" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -565,6 +597,14 @@ msgstr "Impossible d'allouer le 2e tampon" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC déjà utilisé" @@ -675,6 +715,7 @@ msgstr "Echec de l'allocation du tampon RX" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Echec de l'allocation de %d octets du tampon RX" @@ -708,6 +749,10 @@ msgstr "Le fichier existe" msgid "Frequency captured is above capability. Capture Paused." msgstr "La fréquence capturée est au delà des capacités. Capture en pause." +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -722,10 +767,22 @@ msgstr "" msgid "Group full" msgstr "Groupe plein" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "opération d'E/S sur un fichier fermé" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "opération sur I2C non supportée" @@ -754,17 +811,29 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Broche invalide pour '%q'" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, fuzzy msgid "Invalid BMP file" msgstr "Fichier BMP invalide" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -774,11 +843,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Fréquence de PWM invalide" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -790,7 +859,7 @@ msgstr "Argument invalide" msgid "Invalid bits per value" msgstr "Bits par valeur invalides" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c #, fuzzy msgid "Invalid buffer size" msgstr "Longueur de tampon invalide" @@ -820,6 +889,10 @@ msgstr "Fichier invalide" msgid "Invalid format chunk size" msgstr "Taille de bloc de formatage invalide" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -855,6 +928,10 @@ msgstr "Broche invalide pour le canal droit" msgid "Invalid pins" msgstr "Broches invalides" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "Polarité invalide" @@ -884,6 +961,10 @@ msgstr "Nombre de voix invalide" msgid "Invalid wave file" msgstr "Fichier WAVE invalide" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "La partie gauche de l'argument nommé doit être un identifiant" @@ -929,10 +1010,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Le délais au démarrage du micro doit être entre 0.0 et 1.0" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -946,6 +1035,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Pas de DAC sur la puce" @@ -954,13 +1044,23 @@ msgstr "Pas de DAC sur la puce" msgid "No DMA channel found" msgstr "Aucun canal DMA trouvé" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Pas de broche RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Pas de broche TX" @@ -989,6 +1089,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "Pas de support matériel pour cette broche" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1067,6 +1171,7 @@ msgstr "" "à la construction." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1078,9 +1183,14 @@ msgstr "Permission refusée" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "La broche ne peut être utilisée pour l'ADC" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c #, fuzzy msgid "Plus any modules on the filesystem\n" @@ -1102,6 +1212,18 @@ msgstr "Appuyez sur une touche pour entrer sur REPL ou CTRL-D pour recharger." msgid "Pull not used when direction is output." msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'." +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1116,10 +1238,14 @@ msgid "RTC is not supported on this board" msgstr "RTC non supportée sur cette carte" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Lecture seule" @@ -1157,6 +1283,14 @@ msgstr "Mode sans-échec! Le code sauvegardé n'est pas éxecuté.\n" msgid "SDA or SCL needs a pull up" msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c #, fuzzy msgid "Sample rate must be positive" @@ -1205,6 +1339,14 @@ msgstr "La pile doit être au moins de 256" msgid "Stream missing readinto() or write() method." msgstr "Il manque une méthode readinto() ou write() au flux." +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1279,6 +1421,26 @@ msgstr "Trace (appels les plus récents en dernier):\n" msgid "Tuple or struct_time argument required" msgstr "Argument de type tuple ou struct_time nécessaire" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB occupé" @@ -1401,6 +1563,10 @@ msgid "Viper functions don't currently support more than 4 arguments" msgstr "" "les fonctions de Viper ne supportent pas plus de 4 arguments actuellement" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "ATTENTION: le nom de fichier de votre code a deux extensions\n" @@ -2119,7 +2285,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index hors gamme" @@ -2623,6 +2790,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "'pop' d'une entrée PulseIn vide" diff --git a/locale/it_IT.po b/locale/it_IT.po index 4bba0b8022..0378ef77cc 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -481,6 +481,10 @@ msgstr "Impossibile trasferire senza i pin MOSI e MISO." msgid "Cannot unambiguously get sizeof scalar" msgstr "Impossibile ricavare la grandezza scalare di sizeof inequivocabilmente" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Impossibile scrivere senza pin MOSI." @@ -539,6 +543,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "Impossibile inizializzare l'UART" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -561,6 +593,14 @@ msgstr "Impossibile allocare il secondo buffer" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC già in uso" @@ -672,6 +712,7 @@ msgstr "Impossibile allocare buffer RX" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Fallita allocazione del buffer RX di %d byte" @@ -705,6 +746,10 @@ msgstr "File esistente" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -719,10 +764,22 @@ msgstr "" msgid "Group full" msgstr "Gruppo pieno" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "operazione I/O su file chiuso" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "operazione I2C non supportata" @@ -751,16 +808,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Pin %q non valido" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "File BMP non valido" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -770,11 +839,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Frequenza PWM non valida" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -786,7 +855,7 @@ msgstr "Argomento non valido" msgid "Invalid bits per value" msgstr "bits per valore invalido" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c #, fuzzy msgid "Invalid buffer size" msgstr "lunghezza del buffer non valida" @@ -816,6 +885,10 @@ msgstr "File non valido" msgid "Invalid format chunk size" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -851,6 +924,10 @@ msgstr "Pin non valido per il canale destro" msgid "Invalid pins" msgstr "Pin non validi" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "Polarità non valida" @@ -880,6 +957,10 @@ msgstr "Tipo di servizio non valido" msgid "Invalid wave file" msgstr "File wave non valido" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" @@ -926,10 +1007,18 @@ msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" "Il ritardo di avvio del microfono deve essere nell'intervallo tra 0.0 e 1.0" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -943,6 +1032,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Nessun DAC sul chip" @@ -951,13 +1041,23 @@ msgstr "Nessun DAC sul chip" msgid "No DMA channel found" msgstr "Nessun canale DMA trovato" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nessun pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Nessun pin TX" @@ -986,6 +1086,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "Nessun supporto hardware sul pin" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1062,6 +1166,7 @@ msgstr "" "impostato nel costruttore a False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1073,9 +1178,14 @@ msgstr "Permesso negato" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Il pin non ha capacità di ADC" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c #, fuzzy msgid "Plus any modules on the filesystem\n" @@ -1098,6 +1208,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1112,10 +1234,14 @@ msgid "RTC is not supported on this board" msgstr "RTC non supportato su questa scheda" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Sola lettura" @@ -1153,6 +1279,14 @@ msgstr "Modalità sicura in esecuzione! Codice salvato non in esecuzione.\n" msgid "SDA or SCL needs a pull up" msgstr "SDA o SCL necessitano un pull-up" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c #, fuzzy msgid "Sample rate must be positive" @@ -1202,6 +1336,14 @@ msgstr "La dimensione dello stack deve essere almeno 256" msgid "Stream missing readinto() or write() method." msgstr "Metodi mancanti readinto() o write() allo stream." +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1275,6 +1417,26 @@ msgstr "Traceback (chiamata più recente per ultima):\n" msgid "Tuple or struct_time argument required" msgstr "Tupla o struct_time richiesto come argomento" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB occupata" @@ -1392,6 +1554,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "Le funzioni Viper non supportano più di 4 argomenti al momento" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "ATTENZIONE: Il nome del sorgente ha due estensioni\n" @@ -2096,7 +2262,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "indice fuori intervallo" @@ -2598,6 +2765,7 @@ msgstr "pixel_shader deve essere displayio.Palette o displayio.ColorConverter" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "pop sun un PulseIn vuoto" diff --git a/locale/ko.po b/locale/ko.po index b4085c2197..949b8cc62e 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2019-05-06 14:22-0700\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -476,6 +476,10 @@ msgstr "" msgid "Cannot unambiguously get sizeof scalar" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "" @@ -533,6 +537,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -555,6 +587,14 @@ msgstr "" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC가 현재 사용 중입니다" @@ -662,6 +702,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" @@ -695,6 +736,10 @@ msgstr "" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -709,10 +754,22 @@ msgstr "" msgid "Group full" msgstr "" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "" @@ -739,16 +796,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -758,11 +827,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -774,7 +843,7 @@ msgstr "" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "" @@ -802,6 +871,10 @@ msgstr "파일이 유효하지 않습니다" msgid "Invalid format chunk size" msgstr "형식 청크 크기가 잘못되었습니다" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -837,6 +910,10 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다" msgid "Invalid pins" msgstr "핀이 유효하지 않습니다" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" @@ -865,6 +942,10 @@ msgstr "" msgid "Invalid wave file" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" @@ -910,10 +991,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -927,6 +1016,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" @@ -935,13 +1025,23 @@ msgstr "" msgid "No DMA channel found" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -970,6 +1070,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1037,6 +1141,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1048,9 +1153,14 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "" @@ -1071,6 +1181,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1085,10 +1207,14 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "" @@ -1125,6 +1251,14 @@ msgstr "" msgid "SDA or SCL needs a pull up" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1172,6 +1306,14 @@ msgstr "" msgid "Stream missing readinto() or write() method." msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1245,6 +1387,26 @@ msgstr "" msgid "Tuple or struct_time argument required" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "" @@ -1361,6 +1523,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "" @@ -2054,7 +2220,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -2544,6 +2711,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" diff --git a/locale/pl.po b/locale/pl.po index 2ed3a5924b..b25e42fe53 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2019-03-19 18:37-0700\n" "Last-Translator: Radomir Dopieralski \n" "Language-Team: pl\n" @@ -475,6 +475,10 @@ msgstr "Nie można przesyłać bez nóżek MOSI i MISO." msgid "Cannot unambiguously get sizeof scalar" msgstr "Wielkość skalara jest niejednoznaczna" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Nie można pisać bez nóżki MOSI." @@ -532,6 +536,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "Ustawienie UART nie powiodło się" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -554,6 +586,14 @@ msgstr "Nie udała się alokacja drugiego bufora" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC w użyciu" @@ -661,6 +701,7 @@ msgstr "Nie udała się alokacja bufora RX" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Nie udała się alokacja %d bajtów na bufor RX" @@ -694,6 +735,10 @@ msgstr "Plik istnieje" msgid "Frequency captured is above capability. Capture Paused." msgstr "Uzyskana częstotliwość jest niemożliwa. Spauzowano." +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -708,10 +753,22 @@ msgstr "" msgid "Group full" msgstr "Grupa pełna" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Operacja I/O na zamkniętym pliku" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "Operacja I2C nieobsługiwana" @@ -740,16 +797,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Zła nóżka %q" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Zły BMP" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -759,11 +828,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Zła częstotliwość PWM" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -775,7 +844,7 @@ msgstr "Zły argument" msgid "Invalid bits per value" msgstr "Zła liczba bitów wartości" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Zła wielkość bufora" @@ -803,6 +872,10 @@ msgstr "Zły plik" msgid "Invalid format chunk size" msgstr "Zła wielkość fragmentu formatu" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -838,6 +911,10 @@ msgstr "Zła nóżka dla prawego kanału" msgid "Invalid pins" msgstr "Złe nóżki" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "Zła polaryzacja" @@ -866,6 +943,10 @@ msgstr "Zła liczba głosów" msgid "Invalid wave file" msgstr "Zły plik wave" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "Lewa strona argumentu nazwanego musi być nazwą" @@ -911,10 +992,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Opóźnienie włączenia mikrofonu musi być w zakresie od 0.0 do 1.0" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -928,6 +1017,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Brak DAC" @@ -936,13 +1026,23 @@ msgstr "Brak DAC" msgid "No DMA channel found" msgstr "Nie znaleziono kanału DMA" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Brak nóżki RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Brak nóżki TX" @@ -971,6 +1071,10 @@ msgstr "" msgid "No hardware support on pin" msgstr "Brak sprzętowej obsługi na nóżce" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1038,6 +1142,7 @@ msgid "" msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1049,9 +1154,14 @@ msgstr "Odmowa dostępu" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Nóżka nie obsługuje ADC" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "Oraz moduły w systemie plików\n" @@ -1072,6 +1182,18 @@ msgstr "Dowolny klawisz aby uruchomić konsolę. CTRL-D aby przeładować." msgid "Pull not used when direction is output." msgstr "Podciągnięcie nieużywane w trybie wyjścia." +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1086,10 +1208,14 @@ msgid "RTC is not supported on this board" msgstr "Brak obsługi RTC" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Tylko do odczytu" @@ -1126,6 +1252,14 @@ msgstr "Uruchomiony tryb bezpieczeństwa! Zapisany kod nie jest uruchamiany.\n" msgid "SDA or SCL needs a pull up" msgstr "SDA lub SCL wymagają podciągnięcia" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Częstotliwość próbkowania musi być dodatnia" @@ -1173,6 +1307,14 @@ msgstr "Stos musi mieć co najmniej 256 bajtów" msgid "Stream missing readinto() or write() method." msgstr "Strumień nie ma metod readinto() lub write()." +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1246,6 +1388,26 @@ msgstr "Ślad wyjątku (najnowsze wywołanie na końcu):\n" msgid "Tuple or struct_time argument required" msgstr "Wymagana krotka lub struct_time" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB Zajęte" @@ -1361,6 +1523,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "Funkcje Viper nie obsługują obecnie więcej niż 4 argumentów" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "UWAGA: Nazwa pliku ma dwa rozszerzenia\n" @@ -2058,7 +2224,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "indeks poza zakresem" @@ -2549,6 +2716,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "pop z pustego PulseIn" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index ca169d081a..ec4658477e 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2018-10-02 21:14-0000\n" "Last-Translator: \n" "Language-Team: \n" @@ -477,6 +477,10 @@ msgstr "Não é possível transferir sem os pinos MOSI e MISO." msgid "Cannot unambiguously get sizeof scalar" msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Não é possível ler sem um pino MOSI" @@ -535,6 +539,34 @@ msgstr "" msgid "Could not initialize UART" msgstr "Não foi possível inicializar o UART" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" @@ -557,6 +589,14 @@ msgstr "Não pôde alocar segundo buffer" msgid "Crash into the HardFault_Handler." msgstr "" +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC em uso" @@ -667,6 +707,7 @@ msgstr "Falha ao alocar buffer RX" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Falha ao alocar buffer RX de %d bytes" @@ -700,6 +741,10 @@ msgstr "Arquivo já existe" msgid "Frequency captured is above capability. Capture Paused." msgstr "" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -714,10 +759,22 @@ msgstr "" msgid "Group full" msgstr "Grupo cheio" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Operação I/O no arquivo fechado" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "I2C operação não suportada" @@ -744,16 +801,28 @@ msgstr "" msgid "Insufficient encryption" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Pino do %q inválido" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Arquivo BMP inválido" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" @@ -763,11 +832,11 @@ msgstr "" msgid "Invalid PWM frequency" msgstr "Frequência PWM inválida" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" @@ -779,7 +848,7 @@ msgstr "Argumento inválido" msgid "Invalid bits per value" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c #, fuzzy msgid "Invalid buffer size" msgstr "Arquivo inválido" @@ -809,6 +878,10 @@ msgstr "Arquivo inválido" msgid "Invalid format chunk size" msgstr "Tamanho do pedaço de formato inválido" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" @@ -844,6 +917,10 @@ msgstr "Pino inválido para canal direito" msgid "Invalid pins" msgstr "Pinos inválidos" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" @@ -873,6 +950,10 @@ msgstr "certificado inválido" msgid "Invalid wave file" msgstr "Aqruivo de ondas inválido" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" @@ -918,10 +999,18 @@ msgstr "" msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + #: py/parse.c msgid "Name too long" msgstr "" @@ -935,6 +1024,7 @@ msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Nenhum DAC no chip" @@ -943,13 +1033,23 @@ msgstr "Nenhum DAC no chip" msgid "No DMA channel found" msgstr "Nenhum canal DMA encontrado" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nenhum pino RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Nenhum pino TX" @@ -978,6 +1078,10 @@ msgstr "Sem suporte de hardware no pino de clock" msgid "No hardware support on pin" msgstr "Nenhum suporte de hardware no pino" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1048,6 +1152,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1059,9 +1164,14 @@ msgstr "Permissão negada" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "O pino não tem recursos de ADC" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c #, fuzzy msgid "Plus any modules on the filesystem\n" @@ -1083,6 +1193,18 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1097,10 +1219,14 @@ msgid "RTC is not supported on this board" msgstr "O RTC não é suportado nesta placa" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Somente leitura" @@ -1138,6 +1264,14 @@ msgstr "Rodando em modo seguro! Não está executando o código salvo.\n" msgid "SDA or SCL needs a pull up" msgstr "SDA ou SCL precisa de um pull up" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1185,6 +1319,14 @@ msgstr "O tamanho da pilha deve ser pelo menos 256" msgid "Stream missing readinto() or write() method." msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1258,6 +1400,26 @@ msgstr "" msgid "Tuple or struct_time argument required" msgstr "" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB ocupada" @@ -1374,6 +1536,10 @@ msgstr "" msgid "Viper functions don't currently support more than 4 arguments" msgstr "" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "AVISO: Seu arquivo de código tem duas extensões\n" @@ -2071,7 +2237,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "Índice fora do intervalo" @@ -2561,6 +2728,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 7993cf7bd4..8fbd53d704 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-03-16 20:59-0500\n" +"POT-Creation-Date: 2020-03-17 16:39-0500\n" "PO-Revision-Date: 2019-04-13 10:10-0700\n" "Last-Translator: hexthat\n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -481,6 +481,10 @@ msgstr "Méiyǒu MOSI/MISO jiù wúfǎ zhuǎnyí." msgid "Cannot unambiguously get sizeof scalar" msgstr "Wúfǎ míngquè de huòdé biāoliàng de dàxiǎo" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "Wúfǎ gēnggǎi yǐ zài shǐyòng de jìshí qì shàng de pínlǜ" + #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Wúfǎ xiě rù MOSI de yǐn jiǎo." @@ -540,6 +544,34 @@ msgstr "Sǔnhuài de yuánshǐ dàimǎ" msgid "Could not initialize UART" msgstr "Wúfǎ chūshǐhuà UART" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize channel" +msgstr "Wúfǎ chūshǐhuà píndào" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not initialize timer" +msgstr "Wúfǎ chūshǐhuà jìshí qì" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init channel" +msgstr "Wúfǎ chóngxīn chūshǐhuà píndào" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not re-init timer" +msgstr "Wúfǎ chóngxīn qǐdòng jìshí qì" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not restart PWM" +msgstr "Wúfǎ chóngqǐ PWM" + +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Could not start PWM" +msgstr "Wúfǎ qǐdòng PWM" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "Wúfǎ qǐdòng zhōngduàn,RX máng" + #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "Zhǎo bù dào jiěmǎ qì" @@ -562,6 +594,14 @@ msgstr "Wúfǎ fēnpèi dì èr gè huǎnchōng qū" msgid "Crash into the HardFault_Handler." msgstr "Zhuìhuǐ. Shūrù HardFault_Handler." +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "DAC tōngdào chūshǐhuà cuòwù" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "DAC shèbèi chūshǐhuà cuòwù" + #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "Fā yuán huì yǐjīng shǐyòng" @@ -669,6 +709,7 @@ msgstr "Fēnpèi RX huǎnchōng shībài" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Fēnpèi RX huǎnchōng qū%d zì jié shībài" @@ -702,6 +743,10 @@ msgstr "Wénjiàn cúnzài" msgid "Frequency captured is above capability. Capture Paused." msgstr "Pínlǜ bǔhuò gāo yú nénglì. Bǔhuò zàntíng." +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "Pínlǜ bìxū yǔ shǐyòng cǐ jìshí qì de xiàn yǒu PWMOut xiāng pǐpèi" + #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" @@ -716,10 +761,22 @@ msgstr "Jítuán yǐjīng shǐyòngguò" msgid "Group full" msgstr "Fēnzǔ yǐ mǎn" +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +msgid "Hardware busy, try alternative pins" +msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo" + +#: ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "Shǐyòng de yìngjiàn, qǐng chángshì qítā yǐn jiǎo" + #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "Wénjiàn shàng de I/ O cāozuò" +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "I2C chūshǐhuà cuòwù" + #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "I2C cāozuò bù zhīchí" @@ -748,16 +805,28 @@ msgstr "Rènzhèng bùzú" msgid "Insufficient encryption" msgstr "Jiāmì bùzú" +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "Nèibù dìngyì cuòwù" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Wúxiào de %q yǐn jiǎo" +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "Wúxiào de ADC dānwèi zhí" + #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Wúxiào de BMP wénjiàn" -#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "Tí gōng liǎo wúxiào de DAC yǐn jiǎo" + +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "Wúxiào de I2C yǐn jiǎo xuǎnzé" @@ -767,11 +836,11 @@ msgstr "Wúxiào de I2C yǐn jiǎo xuǎnzé" msgid "Invalid PWM frequency" msgstr "Wúxiào de PWM pínlǜ" -#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "Wúxiào de SPI yǐn jiǎo xuǎnzé" -#: ports/mimxrt10xx/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "Wúxiào de UART yǐn jiǎo xuǎnzé" @@ -783,7 +852,7 @@ msgstr "Wúxiào de cānshù" msgid "Invalid bits per value" msgstr "Měi gè zhí de wèi wúxiào" -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Wúxiào de huǎnchōng qū dàxiǎo" @@ -811,6 +880,10 @@ msgstr "Wúxiào de wénjiàn" msgid "Invalid format chunk size" msgstr "Géshì kuài dàxiǎo wúxiào" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "Tígōng de pínlǜ wúxiào" + #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "Wúxiào de nèicún fǎngwèn." @@ -846,6 +919,10 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào" msgid "Invalid pins" msgstr "Wúxiào de yǐn jiǎo" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "Wúxiào liǎng jí zhí" @@ -874,6 +951,10 @@ msgstr "Wúxiào de yǔyīn jìshù" msgid "Invalid wave file" msgstr "Wúxiào de làng làngcháo wénjiàn" +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "Wúxiào de zì/wèi chángdù" + #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "Guānjiàn zì arg de LHS bìxū shì id" @@ -919,10 +1000,18 @@ msgstr "MicroPython zhìmìng cuòwù." msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Màikèfēng qǐdòng yánchí bìxū zài 0.0 Dào 1.0 De fànwéi nèi" +#: ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Bìxū shì %q zi lèi." +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "Bìxū tígōng MISO huò MOSI yǐn jiǎo" + #: py/parse.c msgid "Name too long" msgstr "" @@ -936,6 +1025,7 @@ msgid "No CCCD for this Characteristic" msgstr "Zhège tèzhēng méiyǒu CCCD" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Méiyǒu DAC zài xīnpiàn shàng de" @@ -944,13 +1034,23 @@ msgstr "Méiyǒu DAC zài xīnpiàn shàng de" msgid "No DMA channel found" msgstr "Wèi zhǎodào DMA píndào" +#: ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "Méiyǒu MISO yǐn jiǎo" + +#: ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "Méiyǒu MOSI yǐn jiǎo" + #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Wèi zhǎodào RX yǐn jiǎo" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Wèi zhǎodào TX yǐn jiǎo" @@ -979,6 +1079,10 @@ msgstr "Shízhōng yǐn jiǎo wú yìngjiàn zhīchí" msgid "No hardware support on pin" msgstr "Méiyǒu zài yǐn jiǎo shàng de yìngjiàn zhīchí" +#: ports/stm/common-hal/pulseio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì." + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Yǐn jiǎo shàng méiyǒu xiàlā; 1Mohm tuījiàn" @@ -1052,6 +1156,7 @@ msgid "" msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "Shàng bù zhīchí ParallelBus" @@ -1063,9 +1168,14 @@ msgstr "Quánxiàn bèi jùjué" #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin méiyǒu ADC nénglì" +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "Zài wénjiàn xìtǒng shàng tiānjiā rènhé mókuài\n" @@ -1086,6 +1196,18 @@ msgstr "Àn xià rènhé jiàn jìnrù REPL. Shǐyòng CTRL-D chóngxīn jiāzà msgid "Pull not used when direction is output." msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng." +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "PulseOut not supported on this chip" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "RNG qǔxiāo chūshǐhuà cuòwù" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "RNG chūshǐhuà cuòwù" + #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" @@ -1100,10 +1222,14 @@ msgid "RTC is not supported on this board" msgstr "Cǐ bǎn bù zhīchí RTC" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "Suíjī shù shēngchéng cuòwù" + #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Zhǐ dú" @@ -1140,6 +1266,14 @@ msgstr "Zài ānquán móshì xià yùnxíng! Bù yùnxíng yǐ bǎocún de dài msgid "SDA or SCL needs a pull up" msgstr "SDA huò SCL xūyào lādòng" +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "SPI chūshǐhuà cuòwù" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "SPI chóngxīn chūshǐhuà cuòwù" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Cǎiyàng lǜ bìxū wèi zhèng shù" @@ -1187,6 +1321,14 @@ msgstr "Duīzhàn dàxiǎo bìxū zhìshǎo 256" msgid "Stream missing readinto() or write() method." msgstr "Liú quēshǎo readinto() huò write() fāngfǎ." +#: ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "Dìngyì zhìshǎo yīgè UART yǐn jiǎo" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" @@ -1267,6 +1409,26 @@ msgstr "Traceback (Zuìjìn yīcì dǎ diànhuà):\n" msgid "Tuple or struct_time argument required" msgstr "Xūyào Tuple huò struct_time cānshù" +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "UART huǎnchōng qū fēnpèi cuòwù" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "UART qǔxiāo chūshǐhuà cuòwù" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "UART chūshǐhuà cuòwù" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "UART chóngxīn chūshǐhuà cuòwù" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "UART xiě cuòwù" + #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB máng" @@ -1384,6 +1546,10 @@ msgstr "Zhí chángdù > zuìdà chángdù" msgid "Viper functions don't currently support more than 4 arguments" msgstr "Viper hánshù mùqián bù zhīchí chāoguò 4 gè cānshù" +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "Jǐnggào: Nǐ de dàimǎ wénjiàn míng yǒu liǎng gè kuòzhǎn míng\n" @@ -2086,7 +2252,8 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c -#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "suǒyǐn chāochū fànwéi" @@ -2578,6 +2745,7 @@ msgstr "pixel_shader bìxū shì displayio.Palette huò displayio.ColorConverter #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "cóng kōng de PulseIn dànchū dànchū" @@ -2988,9 +3156,6 @@ msgstr "líng bù" #~ msgid "Can't set CCCD for local Characteristic" #~ msgstr "Wúfǎ wéi běndì tèzhēng shèzhì CCCD" -#~ msgid "Cannot vary frequency on a timer that is already in use" -#~ msgstr "Wúfǎ gēnggǎi yǐ zài shǐyòng de jìshí qì shàng de pínlǜ" - #~ msgid "Characteristic UUID doesn't match Service UUID" #~ msgstr "Zìfú UUID bù fúhé fúwù UUID" @@ -3003,36 +3168,9 @@ msgstr "líng bù" #~ msgid "Could not decode ble_uuid, err 0x%04x" #~ msgstr "Wúfǎ jiěmǎ kě dú_uuid, err 0x%04x" -#~ msgid "Could not initialize channel" -#~ msgstr "Wúfǎ chūshǐhuà píndào" - -#~ msgid "Could not initialize timer" -#~ msgstr "Wúfǎ chūshǐhuà jìshí qì" - -#~ msgid "Could not re-init channel" -#~ msgstr "Wúfǎ chóngxīn chūshǐhuà píndào" - -#~ msgid "Could not re-init timer" -#~ msgstr "Wúfǎ chóngxīn qǐdòng jìshí qì" - -#~ msgid "Could not restart PWM" -#~ msgstr "Wúfǎ chóngqǐ PWM" - -#~ msgid "Could not start PWM" -#~ msgstr "Wúfǎ qǐdòng PWM" - -#~ msgid "Could not start interrupt, RX busy" -#~ msgstr "Wúfǎ qǐdòng zhōngduàn,RX máng" - #~ msgid "Crash into the HardFault_Handler.\n" #~ msgstr "Bēngkuì dào HardFault_Handler.\n" -#~ msgid "DAC Channel Init Error" -#~ msgstr "DAC tōngdào chūshǐhuà cuòwù" - -#~ msgid "DAC Device Init Error" -#~ msgstr "DAC shèbèi chūshǐhuà cuòwù" - #~ msgid "Data too large for the advertisement packet" #~ msgstr "Guǎnggào bāo de shùjù tài dà" @@ -3150,27 +3288,6 @@ msgstr "líng bù" #~ msgid "Flash write failed to start, err 0x%04x" #~ msgstr "Flash xiě rù shībài, err 0x%04x" -#~ msgid "Frequency must match existing PWMOut using this timer" -#~ msgstr "Pínlǜ bìxū yǔ shǐyòng cǐ jìshí qì de xiàn yǒu PWMOut xiāng pǐpèi" - -#~ msgid "Hardware busy, try alternative pins" -#~ msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo" - -#~ msgid "Hardware in use, try alternative pins" -#~ msgstr "Shǐyòng de yìngjiàn, qǐng chángshì qítā yǐn jiǎo" - -#~ msgid "I2C Init Error" -#~ msgstr "I2C chūshǐhuà cuòwù" - -#~ msgid "Internal define error" -#~ msgstr "Nèibù dìngyì cuòwù" - -#~ msgid "Invalid ADC Unit value" -#~ msgstr "Wúxiào de ADC dānwèi zhí" - -#~ msgid "Invalid DAC pin supplied" -#~ msgstr "Tí gōng liǎo wúxiào de DAC yǐn jiǎo" - #~ msgid "Invalid bit clock pin" #~ msgstr "Wúxiào de wèi shízhōng yǐn jiǎo" @@ -3180,12 +3297,6 @@ msgstr "líng bù" #~ msgid "Invalid data pin" #~ msgstr "Wúxiào de shùjù yǐn jiǎo" -#~ msgid "Invalid frequency supplied" -#~ msgstr "Tígōng de pínlǜ wúxiào" - -#~ msgid "Invalid word/bit length" -#~ msgstr "Wúxiào de zì/wèi chángdù" - #~ msgid "" #~ "Looks like our core CircuitPython code crashed hard. Whoops!\n" #~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n" @@ -3202,21 +3313,9 @@ msgstr "líng bù" #~ msgid "MicroPython fatal error.\n" #~ msgstr "MicroPython zhìmìng cuòwù.\n" -#~ msgid "Missing MISO or MOSI Pin" -#~ msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo" - #~ msgid "Must be a Group subclass." #~ msgstr "Bìxū shì fēnzǔ zi lèi." -#~ msgid "Must provide MISO or MOSI pin" -#~ msgstr "Bìxū tígōng MISO huò MOSI yǐn jiǎo" - -#~ msgid "No MISO Pin" -#~ msgstr "Méiyǒu MISO yǐn jiǎo" - -#~ msgid "No MOSI Pin" -#~ msgstr "Méiyǒu MOSI yǐn jiǎo" - #~ msgid "No default I2C bus" #~ msgstr "Méiyǒu mòrèn I2C gōnggòng qìchē" @@ -3226,9 +3325,6 @@ msgstr "líng bù" #~ msgid "No default UART bus" #~ msgstr "Méiyǒu mòrèn UART gōnggòng qìchē" -#~ msgid "No more timers available on this pin." -#~ msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì." - #~ msgid "Only bit maps of 8 bit color or less are supported" #~ msgstr "Jǐn zhīchí 8 wèi yánsè huò xiǎoyú" @@ -3250,30 +3346,12 @@ msgstr "líng bù" #~ msgid "PulseOut not yet supported" #~ msgstr "Shàng bù zhīchí PulseOut" -#~ msgid "RNG DeInit Error" -#~ msgstr "RNG qǔxiāo chūshǐhuà cuòwù" - -#~ msgid "RNG Init Error" -#~ msgstr "RNG chūshǐhuà cuòwù" - -#~ msgid "Random number generation error" -#~ msgstr "Suíjī shù shēngchéng cuòwù" - #~ msgid "Range out of bounds" #~ msgstr "Fànwéi chāochū biānjiè" -#~ msgid "SPI Init Error" -#~ msgstr "SPI chūshǐhuà cuòwù" - -#~ msgid "SPI Re-initialization error" -#~ msgstr "SPI chóngxīn chūshǐhuà cuòwù" - #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX" #~ msgstr "Ruǎn shèbèi wéihù, id: 0X%08lX, pc: 0X%08lX" -#~ msgid "Supply at least one UART pin" -#~ msgstr "Dìngyì zhìshǎo yīgè UART yǐn jiǎo" - #~ msgid "" #~ "The CircuitPython heap was corrupted because the stack was too small.\n" #~ "Please increase stack size limits and press reset (after ejecting " @@ -3311,21 +3389,6 @@ msgstr "líng bù" #~ msgid "To exit, please reset the board without " #~ msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng " -#~ msgid "UART Buffer allocation error" -#~ msgstr "UART huǎnchōng qū fēnpèi cuòwù" - -#~ msgid "UART De-init error" -#~ msgstr "UART qǔxiāo chūshǐhuà cuòwù" - -#~ msgid "UART Init Error" -#~ msgstr "UART chūshǐhuà cuòwù" - -#~ msgid "UART Re-init error" -#~ msgstr "UART chóngxīn chūshǐhuà cuòwù" - -#~ msgid "UART write error" -#~ msgstr "UART xiě cuòwù" - #~ msgid "UUID integer value not in range 0 to 0xffff" #~ msgstr "UUID zhěngshù zhí bùzài fànwéi 0 zhì 0xffff"