diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index b4445abfbf..2bb02b2c9d 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-04 21:18+0530\n"
+"POT-Creation-Date: 2020-11-11 16:30+0530\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -296,7 +296,8 @@ msgstr ""
 msgid "All I2C peripherals are in use"
 msgstr ""
 
-#: ports/esp32s2/peripherals/pcnt_handler.c
+#: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
 
@@ -1248,6 +1249,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -3201,6 +3206,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile
index 55d6e91d44..ec389e9feb 100644
--- a/ports/esp32s2/Makefile
+++ b/ports/esp32s2/Makefile
@@ -104,6 +104,8 @@ INC += -isystem esp-idf/components/soc/soc/include
 INC += -isystem esp-idf/components/soc/soc/esp32s2/include
 INC += -isystem esp-idf/components/heap/include
 INC += -isystem esp-idf/components/esp_system/include
+INC += -isystem esp-idf/components/spi_flash/include
+INC += -isystem esp-idf/components/nvs_flash/include
 INC += -I$(BUILD)/esp-idf/config
 
 CFLAGS += -DHAVE_CONFIG_H \
diff --git a/ports/esp32s2/common-hal/microcontroller/__init__.c b/ports/esp32s2/common-hal/microcontroller/__init__.c
index 6b2e18673d..dc4d2c095e 100644
--- a/ports/esp32s2/common-hal/microcontroller/__init__.c
+++ b/ports/esp32s2/common-hal/microcontroller/__init__.c
@@ -35,6 +35,7 @@
 #include "shared-bindings/microcontroller/__init__.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "shared-bindings/microcontroller/Processor.h"
+#include "shared-bindings/nvm/ByteArray.h"
 
 #include "supervisor/filesystem.h"
 #include "supervisor/shared/safe_mode.h"
@@ -85,6 +86,17 @@ const mcu_processor_obj_t common_hal_mcu_processor_obj = {
     },
 };
 
+#if CIRCUITPY_INTERNAL_NVM_SIZE > 0
+// The singleton nvm.ByteArray object.
+const nvm_bytearray_obj_t common_hal_mcu_nvm_obj = {
+    .base = {
+        .type = &nvm_bytearray_type,
+    },
+    .start_address = (uint8_t*) CIRCUITPY_INTERNAL_NVM_START_ADDR,
+    .len = CIRCUITPY_INTERNAL_NVM_SIZE,
+};
+#endif
+
 // This maps MCU pin names to pin objects.
 STATIC const mp_rom_map_elem_t mcu_pin_global_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_GPIO0), MP_ROM_PTR(&pin_GPIO0) },
diff --git a/ports/esp32s2/common-hal/nvm/ByteArray.c b/ports/esp32s2/common-hal/nvm/ByteArray.c
new file mode 100644
index 0000000000..30051df1ef
--- /dev/null
+++ b/ports/esp32s2/common-hal/nvm/ByteArray.c
@@ -0,0 +1,80 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 microDev
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "common-hal/nvm/ByteArray.h"
+
+#include "py/runtime.h"
+
+#include "nvs_flash.h"
+
+uint32_t common_hal_nvm_bytearray_get_length(nvm_bytearray_obj_t *self) {
+    return self->len;
+}
+
+static nvs_handle get_nvs_handle(void) {
+    // Initialize NVS
+    esp_err_t err = nvs_flash_init();
+    if (err == ESP_ERR_NVS_NO_FREE_PAGES || err == ESP_ERR_NVS_NEW_VERSION_FOUND) {
+        // NVS partition was truncated and needs to be erased
+        // Retry nvs_flash_init
+        ESP_ERROR_CHECK(nvs_flash_erase());
+        err = nvs_flash_init();
+    }
+    ESP_ERROR_CHECK(err);
+
+    // Open NVS handle
+    nvs_handle nvs_handle;
+    if (nvs_open("CPY", NVS_READWRITE, &nvs_handle) != ESP_OK) {
+        mp_raise_RuntimeError(translate("NVS Error"));
+    }
+    return nvs_handle;
+}
+
+bool common_hal_nvm_bytearray_set_bytes(nvm_bytearray_obj_t *self,
+        uint32_t start_index, uint8_t* values, uint32_t len) {
+    char index[9];
+    sprintf(index, "%i", start_index);
+    // start nvs
+    nvs_handle handle = get_nvs_handle();
+    bool status = ((nvs_set_u8(handle, (const char *)index, *values) == ESP_OK) && (nvs_commit(handle) == ESP_OK));
+    // close nvs
+    nvs_close(handle);
+    return status;
+}
+
+// NVM memory is memory mapped so reading it is easy.
+void common_hal_nvm_bytearray_get_bytes(nvm_bytearray_obj_t *self,
+        uint32_t start_index, uint32_t len, uint8_t* values) {
+    char index[9];
+    sprintf(index, "%i", start_index);
+    // start nvs
+    nvs_handle handle = get_nvs_handle();
+    if (nvs_get_u8(handle, (const char *)index, values) != ESP_OK) {
+        mp_raise_RuntimeError(translate("NVS Error"));
+    }
+    // close nvs
+    nvs_close(handle);
+}
diff --git a/ports/esp32s2/common-hal/nvm/ByteArray.h b/ports/esp32s2/common-hal/nvm/ByteArray.h
new file mode 100644
index 0000000000..44b63d7241
--- /dev/null
+++ b/ports/esp32s2/common-hal/nvm/ByteArray.h
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 microDev
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_NVM_BYTEARRAY_H
+#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_NVM_BYTEARRAY_H
+
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    uint8_t* start_address;
+    uint32_t len;
+} nvm_bytearray_obj_t;
+
+#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_NVM_BYTEARRAY_H
diff --git a/ports/esp32s2/common-hal/nvm/__init__.c b/ports/esp32s2/common-hal/nvm/__init__.c
new file mode 100644
index 0000000000..1b702a1584
--- /dev/null
+++ b/ports/esp32s2/common-hal/nvm/__init__.c
@@ -0,0 +1 @@
+// No nvm module functions.
diff --git a/ports/esp32s2/mpconfigport.h b/ports/esp32s2/mpconfigport.h
index cec8dd35df..11ea5f6382 100644
--- a/ports/esp32s2/mpconfigport.h
+++ b/ports/esp32s2/mpconfigport.h
@@ -28,7 +28,6 @@
 #ifndef ESP32S2_MPCONFIGPORT_H__
 #define ESP32S2_MPCONFIGPORT_H__
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE         (0)
 #define MICROPY_NLR_THUMB                   (0)
 
 #define MICROPY_PY_UJSON                    (1)
@@ -36,11 +35,15 @@
 
 #include "py/circuitpy_mpconfig.h"
 
-
 #define MICROPY_PORT_ROOT_POINTERS \
 	CIRCUITPY_COMMON_ROOT_POINTERS
 #define MICROPY_NLR_SETJMP                  (1)
 #define CIRCUITPY_DEFAULT_STACK_SIZE        0x6000
 
+#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x9000)
+
+#ifndef CIRCUITPY_INTERNAL_NVM_SIZE
+#define CIRCUITPY_INTERNAL_NVM_SIZE (20000)
+#endif
 
 #endif  // __INCLUDED_ESP32S2_MPCONFIGPORT_H
diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk
index 4579b95ab6..7f3b4241a0 100644
--- a/ports/esp32s2/mpconfigport.mk
+++ b/ports/esp32s2/mpconfigport.mk
@@ -21,7 +21,7 @@ CIRCUITPY_COUNTIO = 1
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_I2CPERIPHERAL = 0
 CIRCUITPY_ROTARYIO = 1
-CIRCUITPY_NVM = 0
+CIRCUITPY_NVM = 1
 # We don't have enough endpoints to include MIDI.
 CIRCUITPY_USB_MIDI = 0
 CIRCUITPY_WIFI = 1