djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #6182 from tannewt/board_def_cleanup

Browse Source 
Board definition clean up
This commit is contained in:
Jeff Epler 2022-03-22 13:56:55 -05:00 committed by GitHub
commit 35b188d342
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
72 changed files with 18 additions and 350 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
ports/atmel-samd/boards/aloriumtech_evo_m51/mpconfigboard.h
View File

@ -9,7 +9,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_PB03)
// BC needed?
// #define AUTORESET_DELAY_MS 500
// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code

2
ports/atmel-samd/boards/circuitbrains_deluxe_m4/mpconfigboard.h
View File

@ -5,8 +5,6 @@
#define MICROPY_HW_LED_STATUS (&pin_PB13)
#define AUTORESET_DELAY_MS 500
#define BOARD_HAS_CRYSTAL 1
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)

2
ports/atmel-samd/boards/pycubed/mpconfigboard.h
View File

@ -6,8 +6,6 @@
#define MICROPY_HW_LED_STATUS (&pin_PA16)
#define MICROPY_HW_NEOPIXEL (&pin_PA21)
#define AUTORESET_DELAY_MS 500
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

2
ports/atmel-samd/boards/pycubed_mram/mpconfigboard.h
View File

@ -9,8 +9,6 @@
#define EXTERNAL_FLASH_QSPI_SINGLE
#define EXTERNAL_FLASH_NO_JEDEC
#define AUTORESET_DELAY_MS 500
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

2
ports/atmel-samd/boards/pycubed_mram_v05/mpconfigboard.h
View File

@ -9,8 +9,6 @@
#define EXTERNAL_FLASH_QSPI_SINGLE
#define EXTERNAL_FLASH_NO_JEDEC
#define AUTORESET_DELAY_MS 500
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

2
ports/atmel-samd/boards/pycubed_v05/mpconfigboard.h
View File

@ -5,8 +5,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_PA21)
#define AUTORESET_DELAY_MS 500
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

2
ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.h
View File

@ -6,8 +6,6 @@
#define MICROPY_HW_LED_STATUS (&pin_PA23)
#define MICROPY_HW_NEOPIXEL (&pin_PB03)
#define AUTORESET_DELAY_MS 500
#define BOARD_HAS_CRYSTAL 1
#define DEFAULT_SPI_BUS_SCK (&pin_PA17)

6
ports/espressif/boards/adafruit_esp32s2_camera/mpconfigboard.h
View File

@ -32,12 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
#define MICROPY_HW_NEOPIXEL_COUNT (6)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)

6
ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
View File

@ -32,12 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)

6
ports/espressif/boards/adafruit_feather_esp32s2_tft/mpconfigboard.h
View File

@ -32,12 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO34)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO41)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO42)

6
ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
View File

@ -32,12 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)

6
ports/espressif/boards/adafruit_feather_esp32s3_nopsram/mpconfigboard.h
View File

@ -32,12 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)

6
ports/espressif/boards/adafruit_funhouse/mpconfigboard.h
View File

@ -33,12 +33,6 @@
#define MICROPY_HW_APA102_SCK (&pin_GPIO15)
#define MICROPY_HW_APA102_COUNT (5)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO33)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO34)

6
ports/espressif/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
View File

@ -34,12 +34,6 @@
#define CIRCUITPY_STATUS_LED_POWER_INVERTED (1)
#define MICROPY_HW_NEOPIXEL_COUNT (4)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

6
ports/espressif/boards/adafruit_metro_esp32s2/mpconfigboard.h
View File

@ -31,12 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

6
ports/espressif/boards/adafruit_qtpy_esp32s2/mpconfigboard.h
View File

@ -32,12 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO39)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO38)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define CIRCUITPY_BOARD_I2C (2)
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO6, .sda = &pin_GPIO7}, \
{.scl = &pin_GPIO40, .sda = &pin_GPIO41}}

6
ports/espressif/boards/adafruit_qtpy_esp32s3_nopsram/mpconfigboard.h
View File

@ -32,12 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO38)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO37)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define CIRCUITPY_BOARD_I2C (2)
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO6, .sda = &pin_GPIO7}, \
{.scl = &pin_GPIO40, .sda = &pin_GPIO41}}

6
ports/espressif/boards/ai_thinker_esp32-c3s-2m/mpconfigboard.h
View File

@ -39,9 +39,3 @@
// Serial over UART
#define CIRCUITPY_DEBUG_UART_RX DEFAULT_UART_BUS_RX
#define CIRCUITPY_DEBUG_UART_TX DEFAULT_UART_BUS_TX
// For entering safe mode
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO9)
// Explanation of how a user got into safe mode
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

6
ports/espressif/boards/ai_thinker_esp32-c3s/mpconfigboard.h
View File

@ -39,9 +39,3 @@
// Serial over UART
#define CIRCUITPY_DEBUG_UART_RX DEFAULT_UART_BUS_RX
#define CIRCUITPY_DEBUG_UART_TX DEFAULT_UART_BUS_TX
// For entering safe mode
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO9)
// Explanation of how a user got into safe mode
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

6
ports/espressif/boards/ai_thinker_esp_12k_nodemcu/mpconfigboard.h
View File

@ -32,9 +32,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
// #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/artisense_rd00/mpconfigboard.h
View File

@ -33,11 +33,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_UART_BUS_RX (&pin_GPIO17)
#define DEFAULT_UART_BUS_TX (&pin_GPIO18)

5
ports/espressif/boards/atmegazero_esp32s2/mpconfigboard.h
View File

@ -29,11 +29,6 @@
#define MICROPY_HW_BOARD_NAME "ATMegaZero ESP32-S2"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

5
ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
View File

@ -28,8 +28,3 @@
#define MICROPY_HW_BOARD_NAME "CrumpS2"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
View File

@ -28,9 +28,3 @@
#define MICROPY_HW_BOARD_NAME "BastWiFi"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
View File

@ -39,9 +39,3 @@
// Serial over UART
#define CIRCUITPY_DEBUG_UART_RX DEFAULT_UART_BUS_RX
#define CIRCUITPY_DEBUG_UART_TX DEFAULT_UART_BUS_TX
// For entering safe mode
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO2)
// Explanation of how a user got into safe mode
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

4
ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
View File

@ -31,9 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

6
ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
View File

@ -28,9 +28,3 @@
#define MICROPY_HW_BOARD_NAME "ESP32-S3-Box-2.5"
#define MICROPY_HW_MCU_NAME "ESP32S3"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_esp32s3_devkitc_1_n8r2/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_esp32s3_devkitc_1_n8r8/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_esp32s3_devkitm_1_n8/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_hmi_devkit_1/mpconfigboard.h
View File

@ -31,12 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO39)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO40)

6
ports/espressif/boards/espressif_kaluga_1.3/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_kaluga_1/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_saola_1_wroom/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/espressif_saola_1_wrover/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/franzininho_wifi_wroom/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/franzininho_wifi_wrover/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/gravitech_cucumber_m/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)

6
ports/espressif/boards/gravitech_cucumber_ms/mpconfigboard.h
View File

@ -31,12 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)

6
ports/espressif/boards/gravitech_cucumber_r/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)

6
ports/espressif/boards/gravitech_cucumber_rs/mpconfigboard.h
View File

@ -31,12 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)

5
ports/espressif/boards/hexky_s2/mpconfigboard.h
View File

@ -32,11 +32,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

4
ports/espressif/boards/hiibot_iots2/mpconfigboard.h
View File

@ -34,7 +34,3 @@
#define MICROPY_HW_BUTTON (&pin_GPIO21)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO21)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/lilygo_ttgo_t8_esp32_s2_wroom/mpconfigboard.h
View File

@ -28,9 +28,3 @@
#define MICROPY_HW_BOARD_NAME "TTGO T8 ESP32-S2-WROOM"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/lilygo_ttgo_t8_s2/mpconfigboard.h
View File

@ -28,9 +28,3 @@
#define MICROPY_HW_BOARD_NAME "LILYGO TTGO T8 ESP32-S2"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h
View File

@ -28,9 +28,3 @@
#define MICROPY_HW_BOARD_NAME "LILYGO TTGO T8 ESP32-S2 w/Display"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

5
ports/espressif/boards/lolin_s2_mini/mpconfigboard.h
View File

@ -29,11 +29,6 @@
#define MICROPY_HW_BOARD_NAME "S2Mini"
#define MICROPY_HW_MCU_NAME "ESP32S2-S2FN4R2" // from Wemos MP
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO35) // no I2C labels on S2 Mini, def from Wemos MP
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) // no I2C labels on S2 Mini, def from Wemos MP

5
ports/espressif/boards/lolin_s2_pico/mpconfigboard.h
View File

@ -29,11 +29,6 @@
#define MICROPY_HW_BOARD_NAME "S2Pico"
#define MICROPY_HW_MCU_NAME "ESP32S2-S2FN4R2" // from Wemos MP
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) // JST SH Connector Pin 3 NOT STEMMA QT / Feather pinout
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) // JST SH Connector Pin 2 NOT STEMMA QT / Feather pinout

6
ports/espressif/boards/microdev_micro_c3/mpconfigboard.h
View File

@ -46,9 +46,3 @@
// Serial over UART
#define CIRCUITPY_DEBUG_UART_RX DEFAULT_UART_BUS_RX
#define CIRCUITPY_DEBUG_UART_TX DEFAULT_UART_BUS_TX
// For entering safe mode
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO9)
// Explanation of how a user got into safe mode
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

6
ports/espressif/boards/microdev_micro_s2/mpconfigboard.h
View File

@ -41,9 +41,3 @@
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
// For entering safe mode
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
// Explanation of how a user got into safe mode
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

5
ports/espressif/boards/morpheans_morphesp-240/mpconfigboard.h
View File

@ -30,11 +30,6 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO16)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO7)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO6)

6
ports/espressif/boards/muselab_nanoesp32_s2_wroom/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/muselab_nanoesp32_s2_wrover/mpconfigboard.h
View File

@ -30,9 +30,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/odt_pixelwing_esp32_s2/mpconfigboard.h
View File

@ -31,11 +31,5 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

6
ports/espressif/boards/targett_module_clip_wroom/mpconfigboard.h
View File

@ -32,9 +32,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
// #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

6
ports/espressif/boards/targett_module_clip_wrover/mpconfigboard.h
View File

@ -32,9 +32,3 @@
#define MICROPY_HW_MCU_NAME "ESP32S2"
// #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500

5
ports/espressif/boards/unexpectedmaker_feathers2/mpconfigboard.h
View File

@ -29,11 +29,6 @@
#define MICROPY_HW_BOARD_NAME "FeatherS2"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
// #define MICROPY_HW_APA102_MOSI (&pin_GPIO40)
// #define MICROPY_HW_APA102_SCK (&pin_GPIO45)

4
ports/espressif/boards/unexpectedmaker_feathers2_neo/mpconfigboard.h
View File

@ -31,10 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

5
ports/espressif/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
View File

@ -29,11 +29,6 @@
#define MICROPY_HW_BOARD_NAME "FeatherS2 PreRelease"
#define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
// #define MICROPY_HW_APA102_MOSI (&pin_GPIO40)
// #define MICROPY_HW_APA102_SCK (&pin_GPIO45)

4
ports/espressif/boards/unexpectedmaker_feathers3/mpconfigboard.h
View File

@ -31,10 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

4
ports/espressif/boards/unexpectedmaker_pros3/mpconfigboard.h
View File

@ -31,10 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO17)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

4
ports/espressif/boards/unexpectedmaker_tinys2/mpconfigboard.h
View File

@ -31,10 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO1)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO2)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

4
ports/espressif/boards/unexpectedmaker_tinys3/mpconfigboard.h
View File

@ -31,10 +31,6 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO17)
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
#define AUTORESET_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

9
ports/espressif/mpconfigport.h
View File

@ -51,6 +51,15 @@
#define MICROPY_NLR_SETJMP (1)
#define CIRCUITPY_DEFAULT_STACK_SIZE 0x6000
// Nearly all boards have this because it is used to enter the ROM bootloader.
#ifndef CIRCUITPY_BOOT_BUTTON
#ifdef CONFIG_IDF_TARGET_ESP32C3
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO9)
#else
#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
#endif
#endif
#define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x9000)
// 20kB is statically allocated to nvs, but when overwriting an existing

1
ports/litex/boards/fomu/mpconfigboard.h
View File

@ -33,5 +33,4 @@
#define FLASH_PAGE_SIZE (0x1000)
#define FLASH_PARTITION_OFFSET_BYTES (1024 * 1024)
#define AUTORESET_DELAY_MS 500
#define BOARD_FLASH_SIZE (FLASH_SIZE)

1
ports/stm/boards/espruino_pico/mpconfigboard.h
View File

@ -32,7 +32,6 @@
#define FLASH_SIZE (0x60000)
#define FLASH_PAGE_SIZE (0x4000)
#define AUTORESET_DELAY_MS (500)
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000)
#define HSE_VALUE ((uint32_t)8000000)

1
ports/stm/boards/meowbit_v121/mpconfigboard.h
View File

@ -32,7 +32,6 @@
#define FLASH_SIZE (0x80000)
#define FLASH_PAGE_SIZE (0x4000)
#define AUTORESET_DELAY_MS 500
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000)
#define HSE_VALUE ((uint32_t)12000000U)

2
ports/stm/boards/pyb_nano_v2/mpconfigboard.h
View File

@ -44,6 +44,4 @@
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x2000 - 0xC000)
#define AUTORESET_DELAY_MS (500)
#define MICROPY_FATFS_EXFAT 0

2
ports/stm/boards/stm32f411ce_blackpill/mpconfigboard.h
View File

@ -46,5 +46,3 @@
#define DEFAULT_I2C_BUS_SDA (&pin_PB07)
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x2000 - 0xC000)
#define AUTORESET_DELAY_MS (500)

13
supervisor/shared/safe_mode.c
View File

@ -147,12 +147,17 @@ void print_safe_mode_message(safe_mode_t reason) {
switch (reason) {
case USER_SAFE_MODE:
#ifdef BOARD_USER_SAFE_MODE_ACTION
// Output a user safe mode string if it's set.
serial_write_compressed(translate("You requested starting safe mode by "));
serial_write_compressed(BOARD_USER_SAFE_MODE_ACTION);
serial_write_compressed(translate("To exit, please reset the board without "));
message = BOARD_USER_SAFE_MODE_ACTION;
#elif defined(CIRCUITPY_BOOT_BUTTON)
message = translate("pressing boot button at start up.\n");
#endif
if (message != NULL) {
// Output a user safe mode string if it's set.
serial_write_compressed(translate("You requested starting safe mode by "));
serial_write_compressed(message);
serial_write_compressed(translate("To exit, please reset the board without "));
// The final piece is printed below.
}
break;
case MANUAL_SAFE_MODE:
message = translate("You pressed the reset button during boot. Press again to exit safe mode.");