Merge pull request #1503 from hathach/nrf-tinyusb-sd

update tinyusb, work better with sd

lib/tinyusb

@@ -1 +1 @@
-Subproject commit 5804e56e3c2ab4480bf72d94d997f769a645af47
+Subproject commit 29b49199beb8e9b5fead83e5cd36105f8746f1d7

ports/nrf/bluetooth/ble_drv.c

@@ -32,6 +32,8 @@
 #include "ble_drv.h"
 #include "nrf_nvic.h"
 #include "nrf_sdm.h"
+#include "nrf_soc.h"
+#include "nrfx_power.h"
 #include "py/misc.h"
 
 nrf_nvic_state_t nrf_nvic_state = { 0 };
@@ -89,6 +91,23 @@ void SD_EVT_IRQHandler(void) {
     uint32_t evt_id;
     while (sd_evt_get(&evt_id) != NRF_ERROR_NOT_FOUND) {
 //        sd_evt_handler(evt_id);
+
+        switch (evt_id) {
+            // usb power event
+            case NRF_EVT_POWER_USB_DETECTED:
+            case NRF_EVT_POWER_USB_POWER_READY:
+            case NRF_EVT_POWER_USB_REMOVED: {
+                int32_t usbevt = (evt_id == NRF_EVT_POWER_USB_DETECTED   ) ? NRFX_POWER_USB_EVT_DETECTED:
+                                 (evt_id == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY   :
+                                 (evt_id == NRF_EVT_POWER_USB_REMOVED    ) ? NRFX_POWER_USB_EVT_REMOVED : -1;
+
+                extern void tusb_hal_nrf_power_event (uint32_t event);
+                tusb_hal_nrf_power_event(usbevt);
+            }
+            break;
+
+            default: break;
+        }
     }
 
     while (1) {

ports/nrf/bluetooth/bluetooth_common.mk

@@ -6,6 +6,7 @@ $(error Incorrect softdevice set flag)
 endif
 
 CFLAGS += -DBLUETOOTH_SD_DEBUG=1
+CFLAGS += -DSOFTDEVICE_PRESENT
 
 INC += -Ibluetooth/$(SD)_$(MCU_VARIANT)_$(SOFTDEV_VERSION)/$(SD)_$(MCU_VARIANT)_$(SOFTDEV_VERSION)_API/include
 INC += -Ibluetooth/$(SD)_$(MCU_VARIANT)_$(SOFTDEV_VERSION)/$(SD)_$(MCU_VARIANT)_$(SOFTDEV_VERSION)_API/include/$(MCU_VARIANT)

ports/nrf/common-hal/bleio/Adapter.c

@@ -36,6 +36,8 @@
 #include "py/runtime.h"
 #include "shared-bindings/bleio/Adapter.h"
 
+#include "supervisor/usb.h"
+
 STATIC void softdevice_assert_handler(uint32_t id, uint32_t pc, uint32_t info) {
     mp_raise_msg_varg(&mp_type_AssertionError,
                       translate("Soft device assert, id: 0x%08lX, pc: 0x%08lX"), id, pc);
@@ -47,9 +49,6 @@ STATIC uint32_t ble_stack_enable(void) {
         .accuracy = NRF_CLOCK_LF_ACCURACY_20_PPM
     };
 
-    // The SD takes over the POWER IRQ and will fail if the IRQ is already in use
-    nrfx_power_uninit();
-
     uint32_t err_code = sd_softdevice_enable(&clock_config, softdevice_assert_handler);
     if (err_code != NRF_SUCCESS)
         return err_code;
@@ -101,9 +100,19 @@ void common_hal_bleio_adapter_set_enabled(bool enabled) {
 
     uint32_t err_code;
     if (enabled) {
+        // The SD takes over the POWER module and will fail if the module is already in use.
+        // Occurs when USB is initialized previously
+        nrfx_power_uninit();
+
         err_code = ble_stack_enable();
+
+        // Re-init USB hardware
+        init_usb_hardware();
     } else {
         err_code = sd_softdevice_disable();
+
+        // Re-init USB hardware
+        init_usb_hardware();
     }
 
     if (err_code != NRF_SUCCESS) {

ports/nrf/supervisor/usb.c

@@ -36,15 +36,18 @@
 #include "nrf_soc.h"
 #endif
 
-/* tinyusb function that handles power event (detected, ready, removed)
- * We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
- */
+// tinyusb function that handles power event (detected, ready, removed)
+// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
 extern void tusb_hal_nrf_power_event(uint32_t event);
 
 void init_usb_hardware(void) {
 
+    // 2 is max priority (0, 1 are reserved for SD)
+    NVIC_SetPriority(USBD_IRQn, 2);
+
     // USB power may already be ready at this time -> no event generated
-    // We need to invoke the handler based on the status initially
+    // We need to invoke the handler based on the status initially for the first call
+    static bool first_call = true;
     uint32_t usb_reg;
 
 #ifdef SOFTDEVICE_PRESENT
@@ -73,6 +76,8 @@ void init_usb_hardware(void) {
         usb_reg = NRF_POWER->USBREGSTATUS;
     }
 
+    if ( first_call ) {
+        first_call = false;
         if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) {
             tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED);
         }
@@ -80,4 +85,5 @@ void init_usb_hardware(void) {
         if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) {
             tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY);
         }
+    }
 }

supervisor/shared/usb/usb.c

@@ -54,10 +54,8 @@ void load_serial_number(void) {
     }
 }
 
-bool _usb_enabled = false;
-
 bool usb_enabled(void) {
-    return _usb_enabled;
+    return tusb_inited();
 }
 
 void usb_init(void) {
@@ -65,7 +63,6 @@ void usb_init(void) {
     load_serial_number();
 
     tusb_init();
-    _usb_enabled = true;
 
 #if MICROPY_KBD_EXCEPTION
     // Set Ctrl+C as wanted char, tud_cdc_rx_wanted_cb() callback will be invoked when Ctrl+C is received