Merge pull request #2246 from dhalbert/nano-33-ble

Arduino Nano 33 BLE board definition
This commit is contained in:
Limor "Ladyada" Fried 2019-10-26 18:29:53 -04:00 committed by GitHub
commit 2b02750f11
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
20 changed files with 198 additions and 13 deletions

View File

@ -75,6 +75,7 @@ jobs:
board:
- "arduino_mkr1300"
- "arduino_mkrzero"
- "arduino_nano_33_ble"
- "arduino_zero"
- "bast_pro_mini_m0"
- "capablerobot_usbhub"

View File

@ -0,0 +1,27 @@
# Arduino Nano 33 BLE and Nano 33 BLE Sense
The [Arduino Nano 33 BLE](https://store.arduino.cc/usa/nano-33-ble-with-headers) and
[Arduino Nano 33 BLE Sense](https://store.arduino.cc/usa/nano-33-ble-sense) and
are built around the NINA B306 module, based on Nordic nRF 52840 and containing
a powerful Cortex M4F. Both include an onboard 9 axis Inertial Measurement Unit (IMU), the LSM9DS1.
The Nano 33 BLE Sense adds an LPS22HB barometric pressure and temperature sensor,
an ADPS-9960 digital proximity, ambient light, RGB, and gensture sensor,
and an MP34DT05 digital microphone.
Note: the Arduino Nano 33 BLE and BLE Sense do not include a QSPI external
flash. Any Python code will need to be stored on the internal flash
filesystem.
I2C pins `board.SCL1` and `board.SDA1` are not exposed and are used for onboard peripherals.
Pin `board.R_PULLUP` must be set to high to enable the `SCL1` and `SDA1` pullups for proper operation.
Pin `board.VDD_ENV` applies power to the LSM9DS1, and must be high for it to be operational.
Pins `board.MIC_PWR`, `board.PDMDIN`, and `board.PDMCLK` are for the Nano 33 BLE Sense onboard microphone.
Pin `board.INT_ADPS` is the interrupt pin from the ADPS-9960.
Pins `board.RGB_LED_R`, `board.RGB_LED_G`, and `board.RGB_LED_B`
are the red, green and blue LEDS in the onboard RGB LED.
Pins `board.LED_G` and `board.LED_Y` are onboard green and red LEDs. `board.LED_Y` is also `board.SCK`.

View File

@ -0,0 +1,63 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
#include "nrf.h"
#include "nrf_rtc.h"
void board_init(void) {
// Initializations below from Arduino variant.cpp.
// // turn power LED on
// pinMode(LED_PWR, OUTPUT);
// digitalWrite(LED_PWR, HIGH);
// Errata Nano33BLE - I2C pullup is on SWO line, need to disable TRACE
// was being enabled by nrfx_clock_anomaly_132
CoreDebug->DEMCR = 0;
NRF_CLOCK->TRACECONFIG = 0;
// FIXME: bootloader enables interrupt on COMPARE[0], which we don't handle
// Disable it here to avoid getting stuck when OVERFLOW irq is triggered
nrf_rtc_event_disable(NRF_RTC1, NRF_RTC_INT_COMPARE0_MASK);
nrf_rtc_int_disable(NRF_RTC1, NRF_RTC_INT_COMPARE0_MASK);
// // FIXME: always enable I2C pullup and power @startup
// // Change for maximum powersave
// pinMode(PIN_ENABLE_SENSORS_3V3, OUTPUT);
// pinMode(PIN_ENABLE_I2C_PULLUP, OUTPUT);
// digitalWrite(PIN_ENABLE_SENSORS_3V3, HIGH);
// digitalWrite(PIN_ENABLE_I2C_PULLUP, HIGH);
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

View File

@ -0,0 +1,16 @@
#include "nrfx/hal/nrf_gpio.h"
#define MICROPY_HW_BOARD_NAME "Arduino Nano 33 BLE"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500
#define DEFAULT_I2C_BUS_SCL (&pin_P0_02)
#define DEFAULT_I2C_BUS_SDA (&pin_P0_31)
#define DEFAULT_SPI_BUS_SCK (&pin_P0_13)
#define DEFAULT_SPI_BUS_MOSI (&pin_P0_01)
#define DEFAULT_SPI_BUS_MISO (&pin_P1_08)
#define DEFAULT_UART_BUS_RX (&pin_P1_10)
#define DEFAULT_UART_BUS_TX (&pin_P1_03)

View File

@ -0,0 +1,24 @@
USB_VID = 0x2341
USB_PID = 0x805A
USB_PRODUCT = "Arduino_Nano_33_BLE"
USB_MANUFACTURER = "Arduino"
MCU_SERIES = m4
MCU_VARIANT = nrf52
MCU_SUB_VARIANT = nrf52840
MCU_CHIP = nrf52840
SD ?= s140
SOFTDEV_VERSION ?= 6.1.0
BOOT_SETTING_ADDR = 0xFF000
ifeq ($(SD),)
LD_FILE = boards/nrf52840_1M_256k.ld
else
LD_FILE = boards/adafruit_$(MCU_SUB_VARIANT)_$(SD_LOWER)_v$(firstword $(subst ., ,$(SOFTDEV_VERSION))).ld
CIRCUITPY_BLEIO = 1
endif
NRF_DEFINES += -DNRF52840_XXAA -DNRF52840
INTERNAL_FLASH_FILESYSTEM = 1

View File

@ -0,0 +1,63 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_P1_11) },
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_P1_12) },
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_P1_15) },
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_P1_13) },
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_P1_14) },
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_P0_23) },
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_P0_21) },
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_P0_27) },
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_P1_02) },
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_P0_04) },
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_P0_05) },
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_P0_30) },
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_P0_29) },
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_P0_31) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_31) },
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_P0_02) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_02) },
{ MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_P0_28) },
{ MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_P0_03) },
{ MP_ROM_QSTR(MP_QSTR_SDA1), MP_ROM_PTR(&pin_P0_14) },
{ MP_ROM_QSTR(MP_QSTR_SCL1), MP_ROM_PTR(&pin_P0_15) },
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_P1_01) },
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_P1_08) },
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P0_13) },
{ MP_ROM_QSTR(MP_QSTR_LED_Y), MP_ROM_PTR(&pin_P0_13) },
{ MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_P1_09) },
{ MP_ROM_QSTR(MP_QSTR_RGB_LED_R), MP_ROM_PTR(&pin_P0_24) },
{ MP_ROM_QSTR(MP_QSTR_RGB_LED_G), MP_ROM_PTR(&pin_P0_16) },
{ MP_ROM_QSTR(MP_QSTR_RGB_LED_B), MP_ROM_PTR(&pin_P0_06) },
// Power line to LSM9DS1.
{ MP_ROM_QSTR(MP_QSTR_VDD_ENV), MP_ROM_PTR(&pin_P0_22) },
// Pullup voltage for SDA1 and SCL1
{ MP_ROM_QSTR(MP_QSTR_R_PULLUP), MP_ROM_PTR(&pin_P1_00) },
{ MP_ROM_QSTR(MP_QSTR_MIC_PWR), MP_ROM_PTR(&pin_P0_17) },
{ MP_ROM_QSTR(MP_QSTR_PDMCLK), MP_ROM_PTR(&pin_P0_26) },
{ MP_ROM_QSTR(MP_QSTR_PDMDIN), MP_ROM_PTR(&pin_P0_25) },
{ MP_ROM_QSTR(MP_QSTR_INT_APDS), MP_ROM_PTR(&pin_P0_19) },
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_P1_03) },
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_P1_10) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

View File

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Adafruit Circuit Playground Bluefruit"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "CircuitPlaygroundBluefruit"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)

View File

@ -32,7 +32,6 @@
#define MICROPY_HW_BOARD_NAME "Electronut Labs Blip"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "ElectronutLabsPapyr"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

View File

@ -31,7 +31,6 @@
#define MICROPY_HW_BOARD_NAME "Electronut Labs Papyr"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "ElectronutLabsPapyr"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

View File

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Adafruit Feather nRF52840 Express"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Feather52840Express"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)

View File

@ -31,7 +31,6 @@
#define MICROPY_HW_BOARD_NAME "MakerDiary nRF52840 MDK"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "MakerDiary52840MDK"
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(1, 5)
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(1, 4)

View File

@ -31,7 +31,6 @@
#define MICROPY_HW_BOARD_NAME "MakerDiary nRF52840 MDK USB Dongle"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "MakerDiary52840MDKDongle"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

View File

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Adafruit Metro nRF52840 Express"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Metro52840Express"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)

View File

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Particle Argon"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Particle Argon"
#define MICROPY_HW_LED_STATUS (&pin_P1_12)

View File

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Particle Boron"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Particle Boron"
#define MICROPY_HW_LED_STATUS (&pin_P1_12)

View File

@ -29,7 +29,6 @@
#define MICROPY_HW_BOARD_NAME "Particle Xenon"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "Particle Xenon"
#define MICROPY_HW_LED_STATUS (&pin_P1_12)

View File

@ -28,7 +28,6 @@
#define MICROPY_HW_BOARD_NAME "PCA10056 nRF52840-DK"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "nRF52840-DK"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

View File

@ -26,7 +26,6 @@
#define MICROPY_HW_BOARD_NAME "PCA10059 nRF52840 Dongle"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "nRF52840-DK"
#define MICROPY_HW_LED_STATUS (&pin_P0_06)

View File

@ -28,7 +28,6 @@
#define MICROPY_HW_BOARD_NAME "SparkFun Pro nRF52840 Mini"
#define MICROPY_HW_MCU_NAME "nRF52840"
#define MICROPY_PY_SYS_PLATFORM "SFE_NRF52840_Mini"
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500

View File

@ -30,6 +30,10 @@
#include "ble_drv.h"
#ifdef NRF52840
#define MICROPY_PY_SYS_PLATFORM "nRF52840"
#endif
#define MICROPY_PY_COLLECTIONS_ORDEREDDICT (1)
#define MICROPY_PY_FUNCTION_ATTRS (1)
#define MICROPY_PY_IO (1)