From 28353973b21a053558f0c97ca7f7756f82afa5cb Mon Sep 17 00:00:00 2001 From: Hosted Weblate Date: Tue, 29 Sep 2020 21:32:56 +0200 Subject: [PATCH] Update translation files Updated by "Update PO files to match POT (msgmerge)" hook in Weblate. Translation: CircuitPython/main Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/ --- locale/ID.po | 142 ++++++++++++++++++++++++++++++++++----- locale/cs.po | 139 +++++++++++++++++++++++++++++++++----- locale/de_DE.po | 142 ++++++++++++++++++++++++++++++++++----- locale/el.po | 139 +++++++++++++++++++++++++++++++++----- locale/es.po | 142 ++++++++++++++++++++++++++++++++++----- locale/fil.po | 142 ++++++++++++++++++++++++++++++++++----- locale/fr.po | 142 ++++++++++++++++++++++++++++++++++----- locale/hi.po | 139 +++++++++++++++++++++++++++++++++----- locale/it_IT.po | 142 ++++++++++++++++++++++++++++++++++----- locale/ja.po | 139 +++++++++++++++++++++++++++++++++----- locale/ko.po | 139 +++++++++++++++++++++++++++++++++----- locale/nl.po | 142 ++++++++++++++++++++++++++++++++++----- locale/pl.po | 142 ++++++++++++++++++++++++++++++++++----- locale/pt_BR.po | 142 ++++++++++++++++++++++++++++++++++----- locale/sv.po | 142 ++++++++++++++++++++++++++++++++++----- locale/zh_Latn_pinyin.po | 142 ++++++++++++++++++++++++++++++++++----- 16 files changed, 1984 insertions(+), 273 deletions(-) diff --git a/locale/ID.po b/locale/ID.po index 42247dae47..be3fea6022 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-07-06 18:10+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" @@ -284,7 +284,7 @@ msgstr "Alamat harus sepanjang %d byte" msgid "Address type out of range" msgstr "Jenis alamat di luar batas" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Semua perangkat I2C sedang digunakan" @@ -292,11 +292,11 @@ msgstr "Semua perangkat I2C sedang digunakan" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Semua perangkat SPI sedang digunakan" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Semua perangkat UART sedang digunakan" @@ -318,6 +318,9 @@ msgstr "Semua timer untuk pin ini sedang digunakan" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -337,6 +340,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn tidak didukung pada pin yang diberikan" @@ -562,6 +569,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "Tidak dapat menetapkan nilai saat arah input." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Tidak dapat menentukan RTS atau CTS dalam mode RS485" @@ -657,14 +665,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Tidak dapat menginisialisasi UART" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Tidak dapat menginisialisasi kanal" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Tidak dapat menginisialisasi timer" @@ -680,6 +689,10 @@ msgstr "Tidak dapat menginisialisasi ulang timer" msgid "Could not restart PWM" msgstr "Tidak dapat memulai ulang PWM" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -771,6 +784,10 @@ msgstr "Mode kendara tidak digunakan saat arah input." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB hanya beroperasi pada 16 byte di satu waktu" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -828,6 +845,10 @@ msgstr "Penyebaran yang diperluas dengan respon pindai tidak didukung." msgid "FFT is defined for ndarrays only" msgstr "FFT didefinisikan hanya untuk ndarrays" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Gagal mengirim perintah." @@ -844,12 +865,21 @@ msgstr "Gagal untuk mengalokasikan buffer RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Gagal untuk megalokasikan buffer RX dari %d byte" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Gagal terhubung: kesalahan internal" @@ -858,6 +888,10 @@ msgstr "Gagal terhubung: kesalahan internal" msgid "Failed to connect: timeout" msgstr "Gagal terhubung: habis waktu" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Gagal mengurai file MP3" @@ -954,7 +988,7 @@ msgstr "Ukuran penyangga salah" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Kesalahan input/output" @@ -1047,6 +1081,10 @@ msgstr "File tidak valid" msgid "Invalid format chunk size" msgstr "Ukuran potongan format tidak valid" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Frekuensi yang diberikan tidak valid" @@ -1084,6 +1122,8 @@ msgstr "Pin untuk channel kanan tidak valid" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1215,21 +1255,25 @@ msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip" msgid "No DMA channel found" msgstr "tidak ada channel DMA ditemukan" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Tidak pin RX" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1272,6 +1316,14 @@ msgstr "" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1336,6 +1388,14 @@ msgstr "Parity ganjil tidak didukung" msgid "Only 8 or 16 bit mono with " msgstr "Hanya 8 atau 16 bit mono dengan " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1353,6 +1413,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1367,6 +1431,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1412,6 +1477,12 @@ msgstr "Tambahkan module apapun pada filesystem\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1443,12 +1514,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1503,7 +1575,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA atau SCL membutuhkan pull up" @@ -1571,6 +1643,10 @@ msgstr "" msgid "Slices not supported" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" @@ -1733,6 +1809,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "Tidak dapat mengalokasikan buffer untuk signed conversion" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1759,6 +1839,11 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1794,7 +1879,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate tidak didukung" @@ -2042,6 +2127,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "byte > 8 bit tidak didukung" @@ -2556,7 +2642,7 @@ msgstr "lapisan (padding) tidak benar" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index keluar dari jangkauan" @@ -3060,6 +3146,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "Muncul dari PulseIn yang kosong" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3076,6 +3166,24 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "antrian meluap (overflow)" @@ -3319,7 +3427,8 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx dan rx keduanya tidak boleh kosong" @@ -3555,9 +3664,6 @@ msgstr "" #~ msgstr "" #~ "Berjalan di mode aman(safe mode)! tidak menjalankan kode yang tersimpan.\n" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "Muncul dari PulseIn yang kosong" - #~ msgid "struct: index out of range" #~ msgstr "struct: index keluar dari jangkauan" diff --git a/locale/cs.po b/locale/cs.po index 88186b8231..229abad995 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz \n" "Language-Team: LANGUAGE \n" @@ -284,7 +284,7 @@ msgstr "" msgid "Address type out of range" msgstr "" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" @@ -292,11 +292,11 @@ msgstr "" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "" @@ -318,6 +318,9 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -337,6 +340,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "" @@ -554,6 +561,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "" @@ -644,14 +652,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "" @@ -667,6 +676,10 @@ msgstr "" msgid "Could not restart PWM" msgstr "" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -757,6 +770,10 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -814,6 +831,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" @@ -830,12 +851,21 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" @@ -844,6 +874,10 @@ msgstr "" msgid "Failed to connect: timeout" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" @@ -937,7 +971,7 @@ msgstr "" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "" @@ -1030,6 +1064,10 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" @@ -1067,6 +1105,8 @@ msgstr "" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1198,21 +1238,25 @@ msgstr "" msgid "No DMA channel found" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1255,6 +1299,14 @@ msgstr "" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1318,6 +1370,14 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1335,6 +1395,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1349,6 +1413,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1394,6 +1459,12 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1423,12 +1494,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1482,7 +1554,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1550,6 +1622,10 @@ msgstr "" msgid "Slices not supported" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" @@ -1712,6 +1788,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1738,6 +1818,11 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1773,7 +1858,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2013,6 +2098,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "" @@ -2527,7 +2613,7 @@ msgstr "" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -3030,6 +3116,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3046,6 +3136,24 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3288,7 +3396,8 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 1fd1861095..f7d8377e9d 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen \n" "Language: de_DE\n" @@ -283,7 +283,7 @@ msgstr "Die Adresse muss %d Bytes lang sein" msgid "Address type out of range" msgstr "Adresstyp außerhalb des zulässigen Bereichs" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" @@ -291,11 +291,11 @@ msgstr "Alle I2C-Peripheriegeräte sind in Benutzung" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Alle SPI-Peripheriegeräte sind in Benutzung" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Alle UART-Peripheriegeräte sind in Benutzung" @@ -317,6 +317,9 @@ msgstr "Alle timer für diesen Pin werden bereits benutzt" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -336,6 +339,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn ist an diesem Pin nicht unterstützt" @@ -558,6 +565,7 @@ msgstr "Reset zum bootloader nicht möglich da bootloader nicht vorhanden." msgid "Cannot set value when direction is input." msgstr "Der Wert kann nicht gesetzt werden, wenn die Richtung input ist." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "RTS oder CTS können im RS485-Modus nicht angegeben werden" @@ -654,14 +662,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Konnte UART nicht initialisieren" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Kanal konnte nicht initialisiert werden" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Timer konnte nicht initialisiert werden" @@ -677,6 +686,10 @@ msgstr "Timer konnte nicht neu gestartet werden" msgid "Could not restart PWM" msgstr "PWM konnte nicht neu gestartet werden" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -767,6 +780,10 @@ msgstr "Drive mode wird nicht verwendet, wenn die Richtung input ist." msgid "ECB only operates on 16 bytes at a time" msgstr "Die EZB arbeitet jeweils nur mit 16 Bytes" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -825,6 +842,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "FFT ist nur für ndarrays definiert" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Kommando nicht gesendet." @@ -841,12 +862,21 @@ msgstr "Konnte keinen RX Buffer allozieren" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Konnte keine RX Buffer mit %d allozieren" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Verbindung fehlgeschlagen: interner Fehler" @@ -855,6 +885,10 @@ msgstr "Verbindung fehlgeschlagen: interner Fehler" msgid "Failed to connect: timeout" msgstr "Verbindung nicht erfolgreich: timeout" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Parsen der MP3 Datei fehlgeschlagen" @@ -954,7 +988,7 @@ msgstr "Inkorrekte Puffergröße" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Eingabe-/Ausgabefehler" @@ -1047,6 +1081,10 @@ msgstr "Ungültige Datei" msgid "Invalid format chunk size" msgstr "Ungültige format chunk size" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Ungültige Frequenz geliefert" @@ -1084,6 +1122,8 @@ msgstr "Ungültiger Pin für rechten Kanal" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1217,21 +1257,25 @@ msgstr "Kein DAC im Chip vorhanden" msgid "No DMA channel found" msgstr "Kein DMA Kanal gefunden" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Kein MISO Pin" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Kein MOSI Pin" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Kein RX Pin" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1274,6 +1318,14 @@ msgstr "Es wurde kein Schlüssel angegeben" msgid "No long integer support" msgstr "Keine langen Integer (long) unterstützt" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "An diesem Pin sind keine Timer mehr verfügbar." @@ -1339,6 +1391,14 @@ msgstr "Eine ungerade Parität wird nicht unterstützt" msgid "Only 8 or 16 bit mono with " msgstr "Nur 8 oder 16 bit mono mit " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1360,6 +1420,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample muss ein Vielfaches von 8 sein." @@ -1374,6 +1438,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1422,6 +1487,12 @@ msgstr "und alle Module im Dateisystem \n" msgid "Polygon needs at least 3 points" msgstr "Polygone brauchen mindestens 3 Punkte" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1453,12 +1524,13 @@ msgstr "RNG DeInit-Fehler" msgid "RNG Init Error" msgstr "RNG Init Fehler" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "RS485-Inversion angegeben, wenn nicht im RS485-Modus" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Die RTC-Kalibrierung wird auf diesem Board nicht unterstützt" @@ -1512,7 +1584,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA oder SCL brauchen pull up" @@ -1580,6 +1652,10 @@ msgstr "Slice und Wert (value) haben unterschiedliche Längen." msgid "Slices not supported" msgstr "Slices werden nicht unterstützt" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Quell- und Zielbuffer müssen gleich lang sein" @@ -1756,6 +1832,10 @@ msgstr "Der UUID-Wert ist kein str-, int- oder Byte-Puffer" msgid "Unable to allocate buffers for signed conversion" msgstr "Konnte keine Buffer für Vorzeichenumwandlung allozieren" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1782,6 +1862,11 @@ msgstr "Schreiben in nvm nicht möglich." msgid "Unexpected nrfx uuid type" msgstr "Unerwarteter nrfx uuid-Typ" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1821,7 +1906,7 @@ msgstr "" "Eingabeaufforderung auf dem anderen Gerät abgelehnt oder ignoriert." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate wird nicht unterstützt" @@ -2070,6 +2155,7 @@ msgid "byteorder is not a string" msgstr "Byteorder ist kein String" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "bytes mit mehr als 8 bits werden nicht unterstützt" @@ -2598,7 +2684,7 @@ msgstr "padding ist inkorrekt" msgid "index is out of bounds" msgstr "Index ist außerhalb der Grenzen" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index außerhalb der Reichweite" @@ -3111,6 +3197,10 @@ msgstr "pixel_shader muss displayio.Palette oder displayio.ColorConverter sein" msgid "polygon can only be registered in one parent" msgstr "Polygon kann nur in einem übergeordneten Element registriert werden" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop von einem leeren PulseIn" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3127,6 +3217,24 @@ msgstr "pow() drittes Argument darf nicht 0 sein" msgid "pow() with 3 arguments requires integers" msgstr "pow () mit 3 Argumenten erfordert Integer" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "Warteschlangenüberlauf" @@ -3372,7 +3480,8 @@ msgstr "Tupelindex außerhalb des Bereichs" msgid "tuple/list has wrong length" msgstr "tupel/list hat falsche Länge" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx und rx können nicht beide None sein" @@ -3656,9 +3765,6 @@ msgstr "" #~ msgid "object of type '%s' has no len()" #~ msgstr "Objekt vom Typ '%s' hat keine len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop von einem leeren PulseIn" - #~ msgid "pop from an empty set" #~ msgstr "pop von einer leeren Menge (set)" diff --git a/locale/el.po b/locale/el.po index 6732ddfdc5..78487c521f 100644 --- a/locale/el.po +++ b/locale/el.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -279,7 +279,7 @@ msgstr "" msgid "Address type out of range" msgstr "" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" @@ -287,11 +287,11 @@ msgstr "" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "" @@ -313,6 +313,9 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -332,6 +335,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "" @@ -549,6 +556,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "" @@ -639,14 +647,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "" @@ -662,6 +671,10 @@ msgstr "" msgid "Could not restart PWM" msgstr "" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -752,6 +765,10 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -809,6 +826,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" @@ -825,12 +846,21 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" @@ -839,6 +869,10 @@ msgstr "" msgid "Failed to connect: timeout" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" @@ -932,7 +966,7 @@ msgstr "" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "" @@ -1025,6 +1059,10 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" @@ -1062,6 +1100,8 @@ msgstr "" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1193,21 +1233,25 @@ msgstr "" msgid "No DMA channel found" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1250,6 +1294,14 @@ msgstr "" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1313,6 +1365,14 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1330,6 +1390,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1344,6 +1408,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1389,6 +1454,12 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1418,12 +1489,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1477,7 +1549,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1545,6 +1617,10 @@ msgstr "" msgid "Slices not supported" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" @@ -1707,6 +1783,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1733,6 +1813,11 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1768,7 +1853,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2008,6 +2093,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "" @@ -2522,7 +2608,7 @@ msgstr "" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -3025,6 +3111,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3041,6 +3131,24 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3283,7 +3391,8 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "" diff --git a/locale/es.po b/locale/es.po index 69a5f05946..bb0aaa0025 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-09-25 18:20+0000\n" "Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" @@ -287,7 +287,7 @@ msgstr "La dirección debe ser %d bytes de largo" msgid "Address type out of range" msgstr "Tipo de dirección fuera de rango" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Todos los periféricos I2C están siendo usados" @@ -295,11 +295,11 @@ msgstr "Todos los periféricos I2C están siendo usados" msgid "All RX FIFOs in use" msgstr "Todos los FIFOs de RX en uso" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Todos los periféricos SPI están siendo usados" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Todos los periféricos UART están siendo usados" @@ -323,6 +323,9 @@ msgstr "Todos los timers para este pin están siendo utilizados" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -342,6 +345,10 @@ msgstr "Ya se tiene un escucha todas-las-coincidencias" msgid "Already running" msgstr "Ya está en ejecución" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "El pin proporcionado no soporta AnalogIn" @@ -565,6 +572,7 @@ msgstr "No se puede reiniciar a bootloader porque no hay bootloader presente." msgid "Cannot set value when direction is input." msgstr "No se puede asignar un valor cuando la dirección es input." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "No se puede especificar RTS o CTS en modo RS485" @@ -659,14 +667,15 @@ msgid "Could not initialize SDCard" msgstr "No se pudo inicializar SDCard" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "No se puede inicializar la UART" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "No se pudo inicializar el canal" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "No se pudo inicializar el temporizador" @@ -682,6 +691,10 @@ msgstr "No se pudo reiniciar el temporizador" msgid "Could not restart PWM" msgstr "No se pudo reiniciar el PWM" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "No se puede definir la dirección" @@ -772,6 +785,10 @@ msgstr "Modo Drive no se usa cuando la dirección es input." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB solo opera sobre 16 bytes a la vez" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -829,6 +846,10 @@ msgstr "No se admiten anuncios extendidos con respuesta de escaneo." msgid "FFT is defined for ndarrays only" msgstr "FFT se define solo para ndarrays" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Fallo enviando comando." @@ -845,12 +866,21 @@ msgstr "Ha fallado la asignación del buffer RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Falló la asignación del buffer RX de %d bytes" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Error al conectar: error interno" @@ -859,6 +889,10 @@ msgstr "Error al conectar: error interno" msgid "Failed to connect: timeout" msgstr "Error al conectar: tiempo de espera agotado" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Error al analizar el archivo MP3" @@ -955,7 +989,7 @@ msgstr "Tamaño incorrecto del buffer" msgid "Input taking too long" msgstr "La entrada está durando mucho tiempo" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "error Input/output" @@ -1048,6 +1082,10 @@ msgstr "Archivo inválido" msgid "Invalid format chunk size" msgstr "Formato de fragmento de formato no válido" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Frecuencia suministrada no válida" @@ -1085,6 +1123,8 @@ msgstr "Pin inválido para canal derecho" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1216,21 +1256,25 @@ msgstr "El chip no tiene DAC" msgid "No DMA channel found" msgstr "No se encontró el canal DMA" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Sin pin MISO" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Sin pin MOSI" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Sin pin RX" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1273,6 +1317,14 @@ msgstr "No se especificó ninguna llave" msgid "No long integer support" msgstr "No hay soporte de entero largo" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "No hay más temporizadores disponibles en este pin." @@ -1338,6 +1390,14 @@ msgstr "Paridad impar no soportada" msgid "Only 8 or 16 bit mono with " msgstr "Solo mono de 8 ó 16 bit con " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1359,6 +1419,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "Solo se aceptan enteros crudos para ip" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "El sobremuestreo debe ser un múltiplo de 8." @@ -1375,6 +1439,7 @@ msgstr "" "La frecuencia de PWM no se puede escribir variable_frequency es False en la " "construcción." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1422,6 +1487,12 @@ msgstr "Además de cualquier módulo en el sistema de archivos\n" msgid "Polygon needs at least 3 points" msgstr "El polígono necesita al menos 3 puntos" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1454,12 +1525,13 @@ msgstr "Error de desinicializado del RNG" msgid "RNG Init Error" msgstr "Error de inicialización de RNG" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "Se especifica inversión de RS485 sin estar en modo RS485" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Calibración de RTC no es soportada en esta placa" @@ -1513,7 +1585,7 @@ msgstr "¡Corriendo en modo seguro! " msgid "SD card CSD format not supported" msgstr "Sin capacidad para formato CSD para tarjeta SD" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA o SCL necesitan una pull up" @@ -1581,6 +1653,10 @@ msgstr "Slice y value tienen tamaños diferentes." msgid "Slices not supported" msgstr "Rebanadas no soportadas" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Los búferes de fuente y destino deben ser del mismo tamaño" @@ -1757,6 +1833,10 @@ msgstr "UUID valor no es un str, int o byte buffer" msgid "Unable to allocate buffers for signed conversion" msgstr "No se pudieron asignar buffers para la conversión con signo" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1783,6 +1863,11 @@ msgstr "Imposible escribir en nvm." msgid "Unexpected nrfx uuid type" msgstr "Tipo de uuid nrfx inesperado" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "Fallo desconocido" @@ -1820,7 +1905,7 @@ msgstr "" "dispositivo fue declinada o ignorada." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate no soportado" @@ -2069,6 +2154,7 @@ msgid "byteorder is not a string" msgstr "byteorder no es una cadena" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "bytes > 8 bits no soportados" @@ -2590,7 +2676,7 @@ msgstr "relleno (padding) incorrecto" msgid "index is out of bounds" msgstr "el índice está fuera de límites" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index fuera de rango" @@ -3099,6 +3185,10 @@ msgstr "pixel_shader debe ser displayio.Palette o displayio.ColorConverter" msgid "polygon can only be registered in one parent" msgstr "el polígono solo se puede registrar en uno de los padres" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop de un PulseIn vacío" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3115,6 +3205,24 @@ msgstr "el 3er argumento de pow() no puede ser 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() con 3 argumentos requiere enteros" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "desbordamiento de cola(queue)" @@ -3360,7 +3468,8 @@ msgstr "tuple index fuera de rango" msgid "tuple/list has wrong length" msgstr "tupla/lista tiene una longitud incorrecta" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "Ambos tx y rx no pueden ser None" @@ -3644,9 +3753,6 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgid "object of type '%s' has no len()" #~ msgstr "el objeto de tipo '%s' no tiene len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop de un PulseIn vacío" - #~ msgid "pop from an empty set" #~ msgstr "pop desde un set vacío" diff --git a/locale/fil.po b/locale/fil.po index 0b8ead16d1..48d17e0701 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy \n" "Language-Team: fil\n" @@ -281,7 +281,7 @@ msgstr "ang palette ay dapat 32 bytes ang haba" msgid "Address type out of range" msgstr "" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Lahat ng I2C peripherals ginagamit" @@ -289,11 +289,11 @@ msgstr "Lahat ng I2C peripherals ginagamit" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Lahat ng SPI peripherals ay ginagamit" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #, fuzzy msgid "All UART peripherals are in use" msgstr "Lahat ng I2C peripherals ginagamit" @@ -316,6 +316,9 @@ msgstr "Lahat ng timers para sa pin na ito ay ginagamit" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -335,6 +338,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "" @@ -556,6 +563,7 @@ msgstr "Hindi ma-reset sa bootloader dahil walang bootloader." msgid "Cannot set value when direction is input." msgstr "Hindi ma i-set ang value kapag ang direksyon ay input." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "" @@ -647,14 +655,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Hindi ma-initialize ang UART" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "" @@ -670,6 +679,10 @@ msgstr "" msgid "Could not restart PWM" msgstr "" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -763,6 +776,10 @@ msgstr "Drive mode ay hindi ginagamit kapag ang direksyon ay input." msgid "ECB only operates on 16 bytes at a time" msgstr "" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -822,6 +839,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" @@ -838,12 +859,21 @@ msgstr "Nabigong ilaan ang RX buffer" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Nabigong ilaan ang RX buffer ng %d bytes" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" @@ -852,6 +882,10 @@ msgstr "" msgid "Failed to connect: timeout" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" @@ -947,7 +981,7 @@ msgstr "" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "May mali sa Input/Output" @@ -1040,6 +1074,10 @@ msgstr "Mali ang file" msgid "Invalid format chunk size" msgstr "Mali ang format ng chunk size" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" @@ -1077,6 +1115,8 @@ msgstr "Mali ang pin para sa kanang channel" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1208,21 +1248,25 @@ msgstr "Walang DAC sa chip" msgid "No DMA channel found" msgstr "Walang DMA channel na mahanap" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Walang RX pin" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1265,6 +1309,14 @@ msgstr "" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1331,6 +1383,14 @@ msgstr "Odd na parity ay hindi supportado" msgid "Only 8 or 16 bit mono with " msgstr "Tanging 8 o 16 na bit mono na may " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1348,6 +1408,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample ay dapat multiple ng 8." @@ -1363,6 +1427,7 @@ msgid "" msgstr "" "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1408,6 +1473,12 @@ msgstr "Kasama ang kung ano pang modules na sa filesystem\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1439,12 +1510,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibration ay hindi supportado ng board na ito" @@ -1499,7 +1571,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "Kailangan ng pull up resistors ang SDA o SCL" @@ -1567,6 +1639,10 @@ msgstr "Slice at value iba't ibang haba." msgid "Slices not supported" msgstr "Hindi suportado ang Slices" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" @@ -1729,6 +1805,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "Hindi ma-allocate ang buffers para sa naka-sign na conversion" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1756,6 +1836,11 @@ msgstr "Hindi ma i-sulat sa NVM." msgid "Unexpected nrfx uuid type" msgstr "hindi inaasahang indent" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1791,7 +1876,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Hindi supportadong baudrate" @@ -2041,6 +2126,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "hindi sinusuportahan ang bytes > 8 bits" @@ -2567,7 +2653,7 @@ msgstr "mali ang padding" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index wala sa sakop" @@ -3076,6 +3162,10 @@ msgstr "pixel_shader ay dapat displayio.Palette o displayio.ColorConverter" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop mula sa walang laman na PulseIn" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3092,6 +3182,24 @@ msgstr "pow() 3rd argument ay hindi maaring 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() na may 3 argumento kailangan ng integers" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "puno na ang pila (overflow)" @@ -3338,7 +3446,8 @@ msgstr "indeks ng tuple wala sa sakop" msgid "tuple/list has wrong length" msgstr "mali ang haba ng tuple/list" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx at rx hindi pwedeng parehas na None" @@ -3589,9 +3698,6 @@ msgstr "" #~ msgid "object of type '%s' has no len()" #~ msgstr "object na type '%s' walang len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop mula sa walang laman na PulseIn" - #~ msgid "pop from an empty set" #~ msgstr "pop sa walang laman na set" diff --git a/locale/fr.po b/locale/fr.po index bea085d1e3..6824816b48 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-09-16 13:47+0000\n" "Last-Translator: Hugo Dahl \n" "Language: fr\n" @@ -288,7 +288,7 @@ msgstr "L'adresse doit être longue de %d octets" msgid "Address type out of range" msgstr "Type d'adresse hors plage" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Tous les périphériques I2C sont utilisés" @@ -296,11 +296,11 @@ msgstr "Tous les périphériques I2C sont utilisés" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Tous les périphériques SPI sont utilisés" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Tous les périphériques UART sont utilisés" @@ -322,6 +322,9 @@ msgstr "Tous les timers pour cette broche sont utilisés" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -341,6 +344,10 @@ msgstr "" msgid "Already running" msgstr "Déjà en cours d'exécution" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée" @@ -567,6 +574,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "Impossible d'affecter une valeur quand la direction est 'input'." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Impossible de spécifier RTS ou CTS en mode RS485" @@ -663,14 +671,15 @@ msgid "Could not initialize SDCard" msgstr "Impossible d'initialiser la carte SD" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "L'UART n'a pu être initialisé" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Impossible d'initialiser la chaîne" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Impossible d'initialiser la minuterie" @@ -686,6 +695,10 @@ msgstr "Impossible de réinitialiser le minuteur" msgid "Could not restart PWM" msgstr "Impossible de redémarrer PWM" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -776,6 +789,10 @@ msgstr "Le mode Drive n'est pas utilisé quand la direction est 'input'." msgid "ECB only operates on 16 bytes at a time" msgstr "La BCE ne fonctionne que sur 16 octets à la fois" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -834,6 +851,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "La FFT est définie pour les ndarrays uniquement" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Échec de l'envoi de la commande." @@ -850,12 +871,21 @@ msgstr "Echec de l'allocation du tampon RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Echec de l'allocation de %d octets du tampon RX" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Impossible de se connecter : erreur interne" @@ -864,6 +894,10 @@ msgstr "Impossible de se connecter : erreur interne" msgid "Failed to connect: timeout" msgstr "Impossible de se connecter : délai d'expiration" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Impossible d'analyser le fichier MP3" @@ -960,7 +994,7 @@ msgstr "Taille de tampon incorrecte" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Erreur d'entrée/sortie" @@ -1053,6 +1087,10 @@ msgstr "Fichier invalide" msgid "Invalid format chunk size" msgstr "Taille de bloc de formatage invalide" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Fréquence invalide fournie" @@ -1090,6 +1128,8 @@ msgstr "Broche invalide pour le canal droit" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1221,21 +1261,25 @@ msgstr "Pas de DAC sur la puce" msgid "No DMA channel found" msgstr "Aucun canal DMA trouvé" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Pas de broche MISO" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Pas de broche MOSI" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Pas de broche RX" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1278,6 +1322,14 @@ msgstr "Aucune clé n'a été spécifiée" msgid "No long integer support" msgstr "Pas de support entier long" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "Plus de minuteurs disponibles sur cette broche." @@ -1343,6 +1395,14 @@ msgstr "Parité impaire non supportée" msgid "Only 8 or 16 bit mono with " msgstr "Uniquement 8 ou 16 bit mono avec " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1364,6 +1424,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Le sur-échantillonage doit être un multiple de 8." @@ -1382,6 +1446,7 @@ msgstr "" "La fréquence de PWM n'est pas modifiable quand variable_frequency est False " "à la construction." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1430,6 +1495,12 @@ msgstr "Ainsi que tout autre module présent sur le système de fichiers\n" msgid "Polygon needs at least 3 points" msgstr "Polygone a besoin d’au moins 3 points" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1459,12 +1530,13 @@ msgstr "Erreur RNG DeInit" msgid "RNG Init Error" msgstr "Erreur d'initialisation RNG" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "Inversion RS485 spécifiée lorsqu'elle n'est pas en mode RS485" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "étalonnage de la RTC non supportée sur cette carte" @@ -1518,7 +1590,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "Le format de carte SD CSD n'est pas pris en charge" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" @@ -1586,6 +1658,10 @@ msgstr "Tranche et valeur de tailles différentes." msgid "Slices not supported" msgstr "Tranches non supportées" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Les tampons source et de destination doivent être de la même longueur" @@ -1761,6 +1837,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "Impossible d'allouer des tampons pour une conversion signée" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1787,6 +1867,11 @@ msgstr "Impossible d'écrire sur la mémoire non-volatile." msgid "Unexpected nrfx uuid type" msgstr "Type inattendu pour l'uuid nrfx" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1825,7 +1910,7 @@ msgstr "" "appareil ait été refusée ou ignorée." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Débit non supporté" @@ -2075,6 +2160,7 @@ msgid "byteorder is not a string" msgstr "byteorder n'est pas une chaîne" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "octets > 8 bits non supporté" @@ -2606,7 +2692,7 @@ msgstr "espacement incorrect" msgid "index is out of bounds" msgstr "l'index est hors limites" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index hors gamme" @@ -3119,6 +3205,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "le polygone ne peut être enregistré que dans un parent" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "'pop' d'une entrée PulseIn vide" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3135,6 +3225,24 @@ msgstr "le 3e argument de pow() ne peut être 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() avec 3 arguments nécessite des entiers" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "dépassement de file" @@ -3380,7 +3488,8 @@ msgstr "index du tuple hors gamme" msgid "tuple/list has wrong length" msgstr "tuple/liste a une mauvaise longueur" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx et rx ne peuvent être 'None' tous les deux" @@ -3663,9 +3772,6 @@ msgstr "" #~ msgid "object of type '%s' has no len()" #~ msgstr "l'objet de type '%s' n'a pas de len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "'pop' d'une entrée PulseIn vide" - #~ msgid "pop from an empty set" #~ msgstr "'pop' d'un ensemble set vide" diff --git a/locale/hi.po b/locale/hi.po index 137e44eed3..66f8e4865e 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -279,7 +279,7 @@ msgstr "" msgid "Address type out of range" msgstr "" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" @@ -287,11 +287,11 @@ msgstr "" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "" @@ -313,6 +313,9 @@ msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -332,6 +335,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "" @@ -549,6 +556,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "" @@ -639,14 +647,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "" @@ -662,6 +671,10 @@ msgstr "" msgid "Could not restart PWM" msgstr "" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -752,6 +765,10 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -809,6 +826,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" @@ -825,12 +846,21 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" @@ -839,6 +869,10 @@ msgstr "" msgid "Failed to connect: timeout" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" @@ -932,7 +966,7 @@ msgstr "" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "" @@ -1025,6 +1059,10 @@ msgstr "" msgid "Invalid format chunk size" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" @@ -1062,6 +1100,8 @@ msgstr "" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1193,21 +1233,25 @@ msgstr "" msgid "No DMA channel found" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1250,6 +1294,14 @@ msgstr "" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1313,6 +1365,14 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1330,6 +1390,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1344,6 +1408,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1389,6 +1454,12 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1418,12 +1489,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1477,7 +1549,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1545,6 +1617,10 @@ msgstr "" msgid "Slices not supported" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" @@ -1707,6 +1783,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1733,6 +1813,11 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1768,7 +1853,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2008,6 +2093,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "" @@ -2522,7 +2608,7 @@ msgstr "" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -3025,6 +3111,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3041,6 +3131,24 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3283,7 +3391,8 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index 537c6effd9..2377c1a2f1 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin \n" "Language-Team: \n" @@ -280,7 +280,7 @@ msgstr "la palette deve essere lunga 32 byte" msgid "Address type out of range" msgstr "" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Tutte le periferiche I2C sono in uso" @@ -288,11 +288,11 @@ msgstr "Tutte le periferiche I2C sono in uso" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Tutte le periferiche SPI sono in uso" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #, fuzzy msgid "All UART peripherals are in use" msgstr "Tutte le periferiche I2C sono in uso" @@ -315,6 +315,9 @@ msgstr "Tutti i timer per questo pin sono in uso" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -334,6 +337,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "" @@ -557,6 +564,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "non si può impostare un valore quando direzione è input" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "" @@ -648,14 +656,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Impossibile inizializzare l'UART" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "" @@ -671,6 +680,10 @@ msgstr "" msgid "Could not restart PWM" msgstr "" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -763,6 +776,10 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -822,6 +839,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" @@ -838,12 +859,21 @@ msgstr "Impossibile allocare buffer RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Fallita allocazione del buffer RX di %d byte" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" @@ -852,6 +882,10 @@ msgstr "" msgid "Failed to connect: timeout" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" @@ -947,7 +981,7 @@ msgstr "" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Errore input/output" @@ -1042,6 +1076,10 @@ msgstr "File non valido" msgid "Invalid format chunk size" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" @@ -1079,6 +1117,8 @@ msgstr "Pin non valido per il canale destro" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1212,21 +1252,25 @@ msgstr "Nessun DAC sul chip" msgid "No DMA channel found" msgstr "Nessun canale DMA trovato" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nessun pin RX" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1269,6 +1313,14 @@ msgstr "" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1336,6 +1388,14 @@ msgstr "operazione I2C non supportata" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1353,6 +1413,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "L'oversampling deve essere multiplo di 8." @@ -1372,6 +1436,7 @@ msgstr "" "frequenza PWM frequency non è scrivibile quando variable_frequency è " "impostato nel costruttore a False." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1418,6 +1483,12 @@ msgstr "Imposssibile rimontare il filesystem" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1448,12 +1519,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "calibrazione RTC non supportata su questa scheda" @@ -1508,7 +1580,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA o SCL necessitano un pull-up" @@ -1578,6 +1650,10 @@ msgstr "" msgid "Slices not supported" msgstr "Slice non supportate" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" @@ -1740,6 +1816,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "Ipossibilitato ad allocare buffer per la conversione con segno" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1767,6 +1847,11 @@ msgstr "Imposibile scrivere su nvm." msgid "Unexpected nrfx uuid type" msgstr "indentazione inaspettata" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1802,7 +1887,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "baudrate non supportato" @@ -2046,6 +2131,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "byte > 8 bit non supportati" @@ -2568,7 +2654,7 @@ msgstr "padding incorretto" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "indice fuori intervallo" @@ -3083,6 +3169,10 @@ msgstr "pixel_shader deve essere displayio.Palette o displayio.ColorConverter" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop sun un PulseIn vuoto" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3099,6 +3189,24 @@ msgstr "il terzo argomento di pow() non può essere 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() con 3 argomenti richiede interi" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "overflow della coda" @@ -3345,7 +3453,8 @@ msgstr "indice della tupla fuori intervallo" msgid "tuple/list has wrong length" msgstr "tupla/lista ha la lunghezza sbagliata" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx e rx non possono essere entrambi None" @@ -3597,9 +3706,6 @@ msgstr "" #~ msgid "object of type '%s' has no len()" #~ msgstr "l'oggetto di tipo '%s' non implementa len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop sun un PulseIn vuoto" - #~ msgid "pop from an empty set" #~ msgstr "pop da un set vuoto" diff --git a/locale/ja.po b/locale/ja.po index bf53151ad5..d5e2015f4b 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-09-25 18:20+0000\n" "Last-Translator: Taku Fukada \n" "Language-Team: none\n" @@ -286,7 +286,7 @@ msgstr "アドレスは、%dバイト長でなければなりません" msgid "Address type out of range" msgstr "address_typeが範囲外" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "全てのI2C周辺機器が使用中" @@ -294,11 +294,11 @@ msgstr "全てのI2C周辺機器が使用中" msgid "All RX FIFOs in use" msgstr "全てのRX FIFOが使用中" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "全てのSPI周辺機器が使用中" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "全てのUART周辺機器が使用中" @@ -320,6 +320,9 @@ msgstr "このピン用の全てのタイマが使用中" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -339,6 +342,10 @@ msgstr "" msgid "Already running" msgstr "すでに実行中" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "指定のピンはAnalogInに対応していません" @@ -560,6 +567,7 @@ msgstr "ブートローダが存在しないためブートローダへとリセ msgid "Cannot set value when direction is input." msgstr "方向がinputのときは値を設定できません" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "RS485モードにRTSまたはCTSを指定できません" @@ -652,14 +660,15 @@ msgid "Could not initialize SDCard" msgstr "SDカードを初期化できません" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "UARTを初期化できません" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "チャネルを初期化できません" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "タイマーを初期化できません" @@ -675,6 +684,10 @@ msgstr "タイマーを再初期化できません" msgid "Could not restart PWM" msgstr "PWMを再スタートできません" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "アドレスをセットできません" @@ -765,6 +778,10 @@ msgstr "方向がinputのときドライブモードは使われません" msgid "ECB only operates on 16 bytes at a time" msgstr "ECBは一度に16バイトの演算のみを行います" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -822,6 +839,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "FFTはndarrayでのみ使えます" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "コマンド送信に失敗" @@ -838,12 +859,21 @@ msgstr "RXバッファの確保に失敗" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "%dバイトのRXバッファの確保に失敗" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "接続失敗: 内部エラー" @@ -852,6 +882,10 @@ msgstr "接続失敗: 内部エラー" msgid "Failed to connect: timeout" msgstr "接続失敗: タイムアウト" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "MP3ファイルのパーズに失敗" @@ -947,7 +981,7 @@ msgstr "バッファサイズが正しくありません" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "入力/出力エラー" @@ -1040,6 +1074,10 @@ msgstr "不正なファイル" msgid "Invalid format chunk size" msgstr "フォーマットチャンクのサイズが不正" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "不正な周波数が与えられました" @@ -1077,6 +1115,8 @@ msgstr "右チャネルのピンが不正" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1208,21 +1248,25 @@ msgstr "チップにDACがありません" msgid "No DMA channel found" msgstr "DMAチャネルが見つかりません" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "MISOピンなし" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "MOSIピンがありません" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "RXピンがありません" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1265,6 +1309,14 @@ msgstr "キーが指定されていません" msgid "No long integer support" msgstr "long integerに対応していません" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "このピンには使えるタイマーがもうありません" @@ -1330,6 +1382,14 @@ msgstr "奇数パリティには対応していません" msgid "Only 8 or 16 bit mono with " msgstr "8または16ビットの " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1347,6 +1407,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "オーバーサンプルは8の倍数でなければなりません" @@ -1362,6 +1426,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "PWM周波数は生成時のvariable_frequencyがFalseのとき書き換え不可" +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1407,6 +1472,12 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "ポリゴンには少なくとも3つの点が必要" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1436,12 +1507,13 @@ msgstr "RNG解体エラー" msgid "RNG Init Error" msgstr "乱数生成器の初期化エラー" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "このボードはRTCのキャリブレーションに非対応" @@ -1495,7 +1567,7 @@ msgstr "セーフモードで実行中！ " msgid "SD card CSD format not supported" msgstr "SDカードのCSDフォーマットは非対応" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDAとSCLにプルアップが必要" @@ -1563,6 +1635,10 @@ msgstr "スライスと値の長さが一致しません" msgid "Slices not supported" msgstr "スライスは対応していません" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "バッファ (元/先) は同じ長さでなければなりません" @@ -1732,6 +1808,10 @@ msgstr "UUIDの値がstr, int, bufferのいずれでもありません" msgid "Unable to allocate buffers for signed conversion" msgstr "" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1758,6 +1838,11 @@ msgstr "nvmに書き込みできません" msgid "Unexpected nrfx uuid type" msgstr "想定されていないnrfx UUID型" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1793,7 +1878,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "非対応のbaudrate" @@ -2033,6 +2118,7 @@ msgid "byteorder is not a string" msgstr "byteorderが文字列ではありません" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "" @@ -2551,7 +2637,7 @@ msgstr "" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "インデクスが範囲外" @@ -3057,6 +3143,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3073,6 +3163,24 @@ msgstr "pow()の3つ目の引数は0にできません" msgid "pow() with 3 arguments requires integers" msgstr "pow()の第3引数には整数が必要" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "キューがオーバーフローしました" @@ -3316,7 +3424,8 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "タプル/リストの長さが正しくありません" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "txとrxを両方ともNoneにできません" diff --git a/locale/ko.po b/locale/ko.po index f5ac77e906..23396a96e9 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2019-05-06 14:22-0700\n" "Last-Translator: \n" "Language-Team: LANGUAGE \n" @@ -280,7 +280,7 @@ msgstr "" msgid "Address type out of range" msgstr "" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "사용중인 모든 I2C주변 기기" @@ -288,11 +288,11 @@ msgstr "사용중인 모든 I2C주변 기기" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "사용중인 모든 SPI주변 기기" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "사용중인 모든 UART주변 기기" @@ -314,6 +314,9 @@ msgstr "핀의 모든 타이머가 사용 중입니다" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -333,6 +336,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "" @@ -552,6 +559,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "" @@ -642,14 +650,15 @@ msgid "Could not initialize SDCard" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "" @@ -665,6 +674,10 @@ msgstr "" msgid "Could not restart PWM" msgstr "" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" @@ -755,6 +768,10 @@ msgstr "" msgid "ECB only operates on 16 bytes at a time" msgstr "" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -812,6 +829,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" @@ -828,12 +849,21 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" @@ -842,6 +872,10 @@ msgstr "" msgid "Failed to connect: timeout" msgstr "" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" @@ -935,7 +969,7 @@ msgstr "" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "" @@ -1028,6 +1062,10 @@ msgstr "파일이 유효하지 않습니다" msgid "Invalid format chunk size" msgstr "형식 청크 크기가 잘못되었습니다" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" @@ -1065,6 +1103,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1196,21 +1236,25 @@ msgstr "" msgid "No DMA channel found" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1253,6 +1297,14 @@ msgstr "" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1316,6 +1368,14 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1333,6 +1393,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1347,6 +1411,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1392,6 +1457,12 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1421,12 +1492,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1480,7 +1552,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" @@ -1548,6 +1620,10 @@ msgstr "" msgid "Slices not supported" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" @@ -1711,6 +1787,10 @@ msgstr "" msgid "Unable to allocate buffers for signed conversion" msgstr "" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1737,6 +1817,11 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1772,7 +1857,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2012,6 +2097,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "" @@ -2526,7 +2612,7 @@ msgstr "" msgid "index is out of bounds" msgstr "" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" @@ -3029,6 +3115,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3045,6 +3135,24 @@ msgstr "" msgid "pow() with 3 arguments requires integers" msgstr "" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3287,7 +3395,8 @@ msgstr "" msgid "tuple/list has wrong length" msgstr "" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index d9468c7b9e..cffbee62e6 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-09-09 16:05+0000\n" "Last-Translator: Jelle Jager \n" "Language-Team: none\n" @@ -284,7 +284,7 @@ msgstr "Adres moet %d bytes lang zijn" msgid "Address type out of range" msgstr "Adres type buiten bereik" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" @@ -292,11 +292,11 @@ msgstr "Alle I2C peripherals zijn in gebruik" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Alle SPI peripherals zijn in gebruik" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Alle UART peripherals zijn in gebruik" @@ -318,6 +318,9 @@ msgstr "Alle timers voor deze pin zijn in gebruik" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -337,6 +340,10 @@ msgstr "" msgid "Already running" msgstr "Wordt al uitgevoerd" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn niet ondersteund door gegeven pin" @@ -558,6 +565,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "Kan de waarde niet toewijzen als de richting input is." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Kan RTS of CTS niet specificeren in RS485 modus" @@ -652,14 +660,15 @@ msgid "Could not initialize SDCard" msgstr "Kan SDCard niet initialiseren" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Kan UART niet initialiseren" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Kan kanaal niet initialiseren" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Kan timer niet initialiseren" @@ -675,6 +684,10 @@ msgstr "Kan timer niet her-initialiseren" msgid "Could not restart PWM" msgstr "Kan PWM niet herstarten" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "Kan adres niet zetten" @@ -765,6 +778,10 @@ msgstr "Drive modus niet gebruikt als de richting input is." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB werkt alleen met 16 bytes tegelijkertijd" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -822,6 +839,10 @@ msgstr "Extended advertisements met scan antwoord niet ondersteund." msgid "FFT is defined for ndarrays only" msgstr "FFT alleen voor ndarrays gedefineerd" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Commando verzenden mislukt." @@ -838,12 +859,21 @@ msgstr "RX buffer alloceren mislukt" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Mislukt een RX buffer van %d bytes te alloceren" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Verbinding mislukt: interne fout" @@ -852,6 +882,10 @@ msgstr "Verbinding mislukt: interne fout" msgid "Failed to connect: timeout" msgstr "Verbinding mislukt: timeout" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Mislukt om MP3 bestand te ontleden" @@ -949,7 +983,7 @@ msgstr "Incorrecte buffer grootte" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Input/Output fout" @@ -1042,6 +1076,10 @@ msgstr "Ongeldig bestand" msgid "Invalid format chunk size" msgstr "Ongeldig formaat stuk grootte" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Ongeldige frequentie opgegeven" @@ -1079,6 +1117,8 @@ msgstr "Ongeldige pin voor rechter kanaal" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1210,21 +1250,25 @@ msgstr "Geen DAC op de chip" msgid "No DMA channel found" msgstr "Geen DMA kanaal gevonden" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Geen MISO pin" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Geen MOSI pin" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Geen RX pin" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1267,6 +1311,14 @@ msgstr "Een sleutel was niet gespecificeerd" msgid "No long integer support" msgstr "Geen lange integer ondersteuning" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "Geen timers meer beschikbaar op deze pin." @@ -1332,6 +1384,14 @@ msgstr "Oneven pariteit is niet ondersteund" msgid "Only 8 or 16 bit mono with " msgstr "Alleen 8 of 16 bit mono met " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1353,6 +1413,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample moet een meervoud van 8 zijn." @@ -1370,6 +1434,7 @@ msgstr "" "PWM frequentie is niet schrijfbaar wanneer de variable_frequency False is " "tijdens constructie." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1418,6 +1483,12 @@ msgstr "En iedere module in het bestandssysteem\n" msgid "Polygon needs at least 3 points" msgstr "Polygon heeft op zijn minst 3 punten nodig" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1449,12 +1520,13 @@ msgstr "RNG DeInit Fout" msgid "RNG Init Error" msgstr "RNG Init Fout" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "RS485 inversie gespecificeerd terwijl niet in RS485 modus" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibratie niet ondersteund door dit board" @@ -1508,7 +1580,7 @@ msgstr "Veilige modus wordt uitgevoerd! " msgid "SD card CSD format not supported" msgstr "SD kaart CSD formaat niet ondersteund" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA of SCL hebben een pullup nodig" @@ -1576,6 +1648,10 @@ msgstr "Slice en waarde hebben verschillende lengtes." msgid "Slices not supported" msgstr "Slices niet ondersteund" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Bron en bestemming buffers moeten dezelfde lengte hebben" @@ -1748,6 +1824,10 @@ msgstr "UUID waarde is geen str, int, of byte buffer" msgid "Unable to allocate buffers for signed conversion" msgstr "Niet in staat buffers voor gesigneerde conversie te alloceren" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1774,6 +1854,11 @@ msgstr "Niet in staat om naar nvm te schrijven." msgid "Unexpected nrfx uuid type" msgstr "Onverwacht mrfx uuid type" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1811,7 +1896,7 @@ msgstr "" "apparaat geweigerd of genegeerd werd." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Niet-ondersteunde baudsnelheid" @@ -2060,6 +2145,7 @@ msgid "byteorder is not a string" msgstr "byteorder is geen string" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "butes > 8 niet ondersteund" @@ -2579,7 +2665,7 @@ msgstr "vulling (padding) is onjuist" msgid "index is out of bounds" msgstr "index is buiten bereik" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index is buiten bereik" @@ -3086,6 +3172,10 @@ msgid "polygon can only be registered in one parent" msgstr "" "polygoon kan slechts bij één object van een hoger niveau worden geregistreerd" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop van een lege PulseIn" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3102,6 +3192,24 @@ msgstr "derde argument van pow() mag geen 0 zijn" msgid "pow() with 3 arguments requires integers" msgstr "pow() met 3 argumenten vereist integers" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "wachtrij overloop" @@ -3346,7 +3454,8 @@ msgstr "tuple index buiten bereik" msgid "tuple/list has wrong length" msgstr "tuple of lijst heeft onjuiste lengte" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx en rx kunnen niet beiden None zijn" @@ -3627,9 +3736,6 @@ msgstr "zi moet vorm (n_section, 2) hebben" #~ msgid "object of type '%s' has no len()" #~ msgstr "object van type '%s' heeft geen len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop van een lege PulseIn" - #~ msgid "pop from an empty set" #~ msgstr "pop van een lege set" diff --git a/locale/pl.po b/locale/pl.po index df56f7fbd1..ea0c2a4017 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-09-29 01:39+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" @@ -286,7 +286,7 @@ msgstr "Adres musi mieć %d bajtów" msgid "Address type out of range" msgstr "" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Wszystkie peryferia I2C w użyciu" @@ -294,11 +294,11 @@ msgstr "Wszystkie peryferia I2C w użyciu" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Wszystkie peryferia SPI w użyciu" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Wszystkie peryferia UART w użyciu" @@ -320,6 +320,9 @@ msgstr "Wszystkie timery tej nóżki w użyciu" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -339,6 +342,10 @@ msgstr "" msgid "Already running" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn nie jest obsługiwany na danym pinie" @@ -558,6 +565,7 @@ msgstr "Nie można zrestartować -- nie ma bootloadera." msgid "Cannot set value when direction is input." msgstr "Nie można ustawić wartości w trybie wejścia." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Nie można określić RTS ani CTS w trybie RS485" @@ -652,14 +660,15 @@ msgid "Could not initialize SDCard" msgstr "Nie można zainicjować SDCard" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Ustawienie UART nie powiodło się" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Nie można zainicjować kanału" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Nie można zainicjować timera" @@ -675,6 +684,10 @@ msgstr "Nie można ponownie zainicjować timera" msgid "Could not restart PWM" msgstr "Nie można ponownie uruchomić PWM" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "Nie można ustawić adresu" @@ -765,6 +778,10 @@ msgstr "Tryb sterowania nieużywany w trybie wejścia." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB działa tylko na 16 bajtach naraz" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -822,6 +839,10 @@ msgstr "" msgid "FFT is defined for ndarrays only" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Nie udało się wysłać polecenia." @@ -838,12 +859,21 @@ msgstr "Nie udała się alokacja bufora RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Nie udała się alokacja %d bajtów na bufor RX" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Nie udało się połączyć: błąd wewnętrzny" @@ -852,6 +882,10 @@ msgstr "Nie udało się połączyć: błąd wewnętrzny" msgid "Failed to connect: timeout" msgstr "Nie udało się połączyć: upłynął limit czasu" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Nie można przeanalizować pliku MP3" @@ -947,7 +981,7 @@ msgstr "Niewłaściwa wielkość bufora" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Błąd I/O" @@ -1040,6 +1074,10 @@ msgstr "Zły plik" msgid "Invalid format chunk size" msgstr "Zła wielkość fragmentu formatu" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Podano nieprawidłową częstotliwość" @@ -1077,6 +1115,8 @@ msgstr "Zła nóżka dla prawego kanału" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1209,21 +1249,25 @@ msgstr "Brak DAC" msgid "No DMA channel found" msgstr "Nie znaleziono kanału DMA" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Brak pinu MISO" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Brak pinu MOSI" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Brak nóżki RX" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1266,6 +1310,14 @@ msgstr "Nie określono klucza" msgid "No long integer support" msgstr "" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "" @@ -1329,6 +1381,14 @@ msgstr "Nieparzysta parzystość nie jest wspierana" msgid "Only 8 or 16 bit mono with " msgstr "Tylko 8 lub 16 bitów mono z " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1346,6 +1406,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Nadpróbkowanie musi być wielokrotnością 8." @@ -1360,6 +1424,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1405,6 +1470,12 @@ msgstr "Oraz moduły w systemie plików\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1434,12 +1505,13 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Brak obsługi kalibracji RTC" @@ -1493,7 +1565,7 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA lub SCL wymagają podciągnięcia" @@ -1561,6 +1633,10 @@ msgstr "Fragment i wartość są różnych długości." msgid "Slices not supported" msgstr "Fragmenty nieobsługiwane" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Bufory źródłowy i docelowy muszą mieć taką samą długość" @@ -1723,6 +1799,10 @@ msgstr "UUID nie jest typu str, int lub bytes" msgid "Unable to allocate buffers for signed conversion" msgstr "Nie udała się alokacja buforów do konwersji ze znakiem" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1749,6 +1829,11 @@ msgstr "Błąd zapisu do NVM." msgid "Unexpected nrfx uuid type" msgstr "Nieoczekiwany typ nrfx uuid" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1784,7 +1869,7 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Zła szybkość transmisji" @@ -2030,6 +2115,7 @@ msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "bajty większe od 8 bitów są niewspierane" @@ -2545,7 +2631,7 @@ msgstr "złe wypełnienie" msgid "index is out of bounds" msgstr "indeks jest poza zakresem" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "indeks poza zakresem" @@ -3049,6 +3135,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop z pustego PulseIn" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3065,6 +3155,24 @@ msgstr "trzeci argument pow() nie może być 0" msgid "pow() with 3 arguments requires integers" msgstr "trzyargumentowe pow() wymaga liczb całkowitych" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "przepełnienie kolejki" @@ -3308,7 +3416,8 @@ msgstr "indeks krotki poza zakresem" msgid "tuple/list has wrong length" msgstr "krotka/lista ma złą długość" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx i rx nie mogą być oba None" @@ -3564,9 +3673,6 @@ msgstr "" #~ msgid "object of type '%s' has no len()" #~ msgstr "obiekt typu '%s' nie ma len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop z pustego PulseIn" - #~ msgid "pop from an empty set" #~ msgstr "pop z pustego zbioru" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 6a32208780..a565db0985 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-09-22 21:30+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" @@ -288,7 +288,7 @@ msgstr "O endereço deve ter %d bytes de comprimento" msgid "Address type out of range" msgstr "O tipo do endereço está fora do alcance" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Todos os periféricos I2C estão em uso" @@ -296,11 +296,11 @@ msgstr "Todos os periféricos I2C estão em uso" msgid "All RX FIFOs in use" msgstr "Todos os FIFOs RX estão em uso" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Todos os periféricos SPI estão em uso" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Todos os periféricos UART estão em uso" @@ -322,6 +322,9 @@ msgstr "Todos os temporizadores para este pino estão em uso" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -341,6 +344,10 @@ msgstr "Já há um ouvinte com todas as correspondências" msgid "Already running" msgstr "Já está em execução" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "O AnalogIn não é compatível no pino informado" @@ -567,6 +574,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "Não é possível definir o valor quando a direção é inserida." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Não é possível definir o RTS ou CTS no modo RS485" @@ -661,14 +669,15 @@ msgid "Could not initialize SDCard" msgstr "Não foi possível inicializar o SDCard" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Não foi possível inicializar o UART" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Não foi possível inicializar o canal" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Não foi possível inicializar o temporizador" @@ -684,6 +693,10 @@ msgstr "Não foi possível reiniciar o temporizador" msgid "Could not restart PWM" msgstr "Não foi possível reiniciar o PWM" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "Não foi possível definir o endereço" @@ -774,6 +787,10 @@ msgstr "O modo do controlador não é usado quando a direção for inserida." msgid "ECB only operates on 16 bytes at a time" msgstr "O BCE opera apenas com 16 bytes por vez" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -831,6 +848,10 @@ msgstr "Anúncios estendidos não compatíveis com a resposta da varredura." msgid "FFT is defined for ndarrays only" msgstr "O FFT é definido apenas para ndarrays" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Falha ao enviar comando." @@ -847,12 +868,21 @@ msgstr "Falha ao alocar buffer RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Falha ao alocar buffer RX de %d bytes" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Falha ao conectar: erro interno" @@ -861,6 +891,10 @@ msgstr "Falha ao conectar: erro interno" msgid "Failed to connect: timeout" msgstr "Falha ao conectar: tempo limite" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Falha ao analisar o arquivo MP3" @@ -958,7 +992,7 @@ msgstr "O tamanho do buffer está incorreto" msgid "Input taking too long" msgstr "A entrada está demorando demais" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Erro de entrada/saída" @@ -1051,6 +1085,10 @@ msgstr "Arquivo inválido" msgid "Invalid format chunk size" msgstr "Tamanho do pedaço de formato inválido" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "A frequência informada é inválida" @@ -1088,6 +1126,8 @@ msgstr "Pino inválido para canal direito" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1219,21 +1259,25 @@ msgstr "Nenhum DAC no chip" msgid "No DMA channel found" msgstr "Nenhum canal DMA encontrado" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Nenhum pino MISO" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Nenhum pino MOSI" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nenhum pino RX" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1276,6 +1320,14 @@ msgstr "Nenhuma chave foi definida" msgid "No long integer support" msgstr "Não há compatibilidade com inteiro longo" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "Não há mais temporizadores disponíveis neste pino." @@ -1340,6 +1392,14 @@ msgstr "A paridade ímpar não é compatível" msgid "Only 8 or 16 bit mono with " msgstr "Apenas mono com 8 ou 16 bits com " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1361,6 +1421,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "Apenas o int bruto é compatível para o ip" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "A superamostragem deve ser um múltiplo de 8." @@ -1379,6 +1443,7 @@ msgstr "" "A frequência do PWM não pode ser gravada quando variable_frequency for False " "na construção." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1427,6 +1492,12 @@ msgstr "Além de quaisquer módulos no sistema de arquivos\n" msgid "Polygon needs at least 3 points" msgstr "O Polígono precisa de pelo menos 3 pontos" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1461,12 +1532,13 @@ msgstr "Erro DeInit RNG" msgid "RNG Init Error" msgstr "Houve um erro na inicialização do RNG" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "A definição da inversão do RS485 quando não está no modo RS485" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "A calibração RTC não é suportada nesta placa" @@ -1520,7 +1592,7 @@ msgstr "Executando no modo de segurança! " msgid "SD card CSD format not supported" msgstr "O formato CSD do Cartão SD não é compatível" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA ou SCL precisa de um pull up" @@ -1588,6 +1660,10 @@ msgstr "Fatie e avalie os diferentes comprimentos." msgid "Slices not supported" msgstr "Fatiamento não compatível" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Os buffers da origem e do destino devem ter o mesmo comprimento" @@ -1764,6 +1840,10 @@ msgstr "O valor UUID não é um buffer str, int ou byte" msgid "Unable to allocate buffers for signed conversion" msgstr "Não é possível alocar buffers para conversão assinada" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1790,6 +1870,11 @@ msgstr "Não é possível gravar no nvm." msgid "Unexpected nrfx uuid type" msgstr "Tipo uuid nrfx inesperado" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "Falha desconhecida" @@ -1827,7 +1912,7 @@ msgstr "" "dispositivo tenha sido recusado ou ignorado." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Taxa de transmissão não suportada" @@ -2077,6 +2162,7 @@ msgid "byteorder is not a string" msgstr "a ordem dos bytes não é uma cadeia de caracteres" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "bytes > 8 bits não suportado" @@ -2601,7 +2687,7 @@ msgstr "preenchimento incorreto" msgid "index is out of bounds" msgstr "o índice está fora dos limites" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "Índice fora do intervalo" @@ -3114,6 +3200,10 @@ msgstr "o pixel_shader deve ser displayio.Palette ou displayio.ColorConverter" msgid "polygon can only be registered in one parent" msgstr "o polígono só pode ser registrado em um pai" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop a partir de um PulseIn vazio" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3130,6 +3220,24 @@ msgstr "O terceiro argumento pow() não pode ser 0" msgid "pow() with 3 arguments requires integers" msgstr "o pow() com 3 argumentos requer números inteiros" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "estouro de fila" @@ -3374,7 +3482,8 @@ msgstr "o índice da tupla está fora do intervalo" msgid "tuple/list has wrong length" msgstr "a tupla/lista está com tamanho incorreto" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "TX e RX não podem ser ambos" @@ -3666,9 +3775,6 @@ msgstr "zi deve estar na forma (n_section, 2)" #~ msgid "object of type '%s' has no len()" #~ msgstr "O objeto do tipo '%s' não possui len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop a partir de um PulseIn vazio" - #~ msgid "pop from an empty set" #~ msgstr "pop a partir de um conjunto vazio" diff --git a/locale/sv.po b/locale/sv.po index c181e975c8..cb69ecef1d 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2020-09-07 19:36+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" @@ -284,7 +284,7 @@ msgstr "Adressen måste vara %d byte lång" msgid "Address type out of range" msgstr "Adresstyp utanför intervallet" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "All I2C-kringutrustning används" @@ -292,11 +292,11 @@ msgstr "All I2C-kringutrustning används" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "All SPI-kringutrustning används" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Alla UART-kringutrustning används" @@ -318,6 +318,9 @@ msgstr "Alla timers för denna pinne är i bruk" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -337,6 +340,10 @@ msgstr "" msgid "Already running" msgstr "Kör redan" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn stöds inte på angiven pinne" @@ -558,6 +565,7 @@ msgstr "" msgid "Cannot set value when direction is input." msgstr "Kan inte sätta värde när riktning är input." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Det går inte att specificera RTS eller CTS i RS485-läget" @@ -652,14 +660,15 @@ msgid "Could not initialize SDCard" msgstr "Kan inte initiera SD-kort" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Det gick inte att initiera UART" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Det gick inte att initiera kanalen" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Det gick inte att initialisera timern" @@ -675,6 +684,10 @@ msgstr "Det gick inte att återinitiera timern" msgid "Could not restart PWM" msgstr "Det gick inte att starta om PWM" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "Kan inte ange adress" @@ -765,6 +778,10 @@ msgstr "Drivläge används inte när riktning är input." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB arbetar endast på 16 byte åt gången" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -822,6 +839,10 @@ msgstr "Utökad annonsering i kombination med skanningssvar stöds inte." msgid "FFT is defined for ndarrays only" msgstr "FFT är enbart definierade för ndarrays" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Det gick inte att skicka kommandot." @@ -838,12 +859,21 @@ msgstr "Det gick inte att tilldela RX-buffert" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Det gick inte att allokera RX-bufferten på %d byte" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Det gick inte att ansluta: internt fel" @@ -852,6 +882,10 @@ msgstr "Det gick inte att ansluta: internt fel" msgid "Failed to connect: timeout" msgstr "Det gick inte att ansluta: timeout" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Det gick inte att tolka MP3-filen" @@ -947,7 +981,7 @@ msgstr "Fel buffertstorlek" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Indata-/utdatafel" @@ -1040,6 +1074,10 @@ msgstr "Felaktig fil" msgid "Invalid format chunk size" msgstr "Ogiltig formatsegmentstorlek" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Ogiltig frekvens angiven" @@ -1077,6 +1115,8 @@ msgstr "Ogiltig pinne för höger kanal" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1209,21 +1249,25 @@ msgstr "Ingen DAC på chipet" msgid "No DMA channel found" msgstr "Ingen DMA-kanal hittades" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Ingen MISO-pinne" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Ingen MOSI-pinne" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Ingen RX-pinne" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1266,6 +1310,14 @@ msgstr "Ingen nyckel angavs" msgid "No long integer support" msgstr "Inget stöd för långt heltal" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "Inga fler timers tillgängliga på denna pinne." @@ -1331,6 +1383,14 @@ msgstr "Udda paritet stöds inte" msgid "Only 8 or 16 bit mono with " msgstr "Endast 8 eller 16 bitars mono med " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1351,6 +1411,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Översampling måste vara multipel av 8." @@ -1367,6 +1431,7 @@ msgstr "" "PWM-frekvensen är inte skrivbar när variable_frequency är falsk vid " "skapandet." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1415,6 +1480,12 @@ msgstr "Plus eventuella moduler i filsystemet\n" msgid "Polygon needs at least 3 points" msgstr "Polygonen behöver minst 3 punkter" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1447,12 +1518,13 @@ msgstr "RNG DeInit-fel" msgid "RNG Init Error" msgstr "RNG Init-fel" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "RS485-inversion specificerad när den inte är i RS485-läge" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC-kalibrering stöds inte av detta kort" @@ -1506,7 +1578,7 @@ msgstr "Kör i säkert läge! " msgid "SD card CSD format not supported" msgstr "SD-kort CSD-format stöds inte" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA eller SCL behöver en pullup" @@ -1574,6 +1646,10 @@ msgstr "Slice och värde har olika längd." msgid "Slices not supported" msgstr "Slice stöds inte" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Käll- och målbuffertar måste ha samma längd" @@ -1746,6 +1822,10 @@ msgstr "UUID-värdet är inte str, int eller byte-buffert" msgid "Unable to allocate buffers for signed conversion" msgstr "Det går inte att allokera buffert för signerad konvertering" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1772,6 +1852,11 @@ msgstr "Det gick inte att skriva till nvm." msgid "Unexpected nrfx uuid type" msgstr "Oväntad nrfx uuid-typ" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1809,7 +1894,7 @@ msgstr "" "eller ignorerades." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate stöd inte" @@ -2055,6 +2140,7 @@ msgid "byteorder is not a string" msgstr "byteorder är inte en sträng" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "bytes> 8 bitar stöds inte" @@ -2574,7 +2660,7 @@ msgstr "felaktig utfyllnad" msgid "index is out of bounds" msgstr "index är utanför gränserna" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "index utanför intervallet" @@ -3081,6 +3167,10 @@ msgstr "" msgid "polygon can only be registered in one parent" msgstr "polygon kan endast registreras i en förälder" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "pop från en tom PulseIn" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3097,6 +3187,24 @@ msgstr "pow() 3: e argument kan inte vara 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() med 3 argument kräver heltal" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "köstorlek överskreds" @@ -3341,7 +3449,8 @@ msgstr "tupelindex utanför intervallet" msgid "tuple/list has wrong length" msgstr "tupel/lista har fel längd" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx och rx kan inte båda vara None" @@ -3624,9 +3733,6 @@ msgstr "zi måste vara i formen (n_section, 2)" #~ msgid "object of type '%s' has no len()" #~ msgstr "objekt av typen '%s' har ingen len()" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "pop från en tom PulseIn" - #~ msgid "pop from an empty set" #~ msgstr "pop från en tom uppsättning" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 2b146478c1..a9c8c422ea 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-09-24 16:55-0500\n" +"POT-Creation-Date: 2020-09-29 11:11+0530\n" "PO-Revision-Date: 2019-04-13 10:10-0700\n" "Last-Translator: hexthat\n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -285,7 +285,7 @@ msgstr "Dìzhǐ bìxū shì %d zì jié zhǎng" msgid "Address type out of range" msgstr "Dìzhǐ lèixíng chāochū fànwéi" -#: ports/nrf/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" @@ -293,11 +293,11 @@ msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" msgid "All RX FIFOs in use" msgstr "" -#: ports/nrf/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Suǒyǒu SPI wàiwéi qì zhèngzài shǐyòng" -#: ports/nrf/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Suǒyǒu UART wàiwéi zhèngzài shǐyòng" @@ -319,6 +319,9 @@ msgstr "Cǐ yǐn jiǎo de suǒyǒu jìshí qì zhèngzài shǐyòng" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c @@ -338,6 +341,10 @@ msgstr "" msgid "Already running" msgstr "yǐ zài yùn xíng" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "Already scanning for wifi networks" +msgstr "" + #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "Gěi dìng de yǐn jiǎo bù zhīchí AnalogIn" @@ -557,6 +564,7 @@ msgstr "Wúfǎ chóng zhì wèi bootloader, yīnwèi méiyǒu bootloader cúnzà msgid "Cannot set value when direction is input." msgstr "Dāng fāngxiàng xiàng nèi shí, bùnéng shèzhì gāi zhí." +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "wú fǎ zài RS485 mó shì xià zhǐ dìng RTS huò CTS" @@ -649,14 +657,15 @@ msgid "Could not initialize SDCard" msgstr "wú fǎ chū shǐ huà SDCard" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Wúfǎ chūshǐhuà UART" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize channel" msgstr "Wúfǎ chūshǐhuà píndào" -#: ports/stm/common-hal/pwmio/PWMOut.c +#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not initialize timer" msgstr "Wúfǎ chūshǐhuà jìshí qì" @@ -672,6 +681,10 @@ msgstr "Wúfǎ chóngxīn qǐdòng jìshí qì" msgid "Could not restart PWM" msgstr "Wúfǎ chóngqǐ PWM" +#: ports/esp32s2/common-hal/neopixel_write/__init__.c +msgid "Could not retrieve clock" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "wú fǎ shè zhì dì zhǐ" @@ -762,6 +775,10 @@ msgstr "Fāngxiàng shūrù shí qūdòng móshì méiyǒu shǐyòng." msgid "ECB only operates on 16 bytes at a time" msgstr "ECB yí cì zhǐ shǐ yòng 16 gè zì jié" +#: ports/esp32s2/common-hal/busio/SPI.c +msgid "ESP-IDF memory allocation failed" +msgstr "" + #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -819,6 +836,10 @@ msgstr "Bù zhīchí dài yǒu sǎomiáo xiǎngyìng de kuòzhǎn guǎngbò." msgid "FFT is defined for ndarrays only" msgstr "FFT jǐn wéi ndarrays dìng yì" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Failed SSL handshake" +msgstr "" + #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Fāsòng mìnglìng shībài." @@ -835,12 +856,21 @@ msgstr "Fēnpèi RX huǎnchōng shībài" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Fēnpèi RX huǎnchōng qū%d zì jié shībài" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to allocate Wifi memory" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c +msgid "Failed to allocate wifi scan memory" +msgstr "" + #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Liánjiē shībài: Nèibù cuòwù" @@ -849,6 +879,10 @@ msgstr "Liánjiē shībài: Nèibù cuòwù" msgid "Failed to connect: timeout" msgstr "Liánjiē shībài: Chāoshí" +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Failed to init wifi" +msgstr "" + #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Wúfǎ jiěxī MP3 wénjiàn" @@ -944,7 +978,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" msgid "Input taking too long" msgstr "" -#: py/moduerrno.c +#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Shūrù/shūchū cuòwù" @@ -1037,6 +1071,10 @@ msgstr "Wúxiào de wénjiàn" msgid "Invalid format chunk size" msgstr "Géshì kuài dàxiǎo wúxiào" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Tígōng de pínlǜ wúxiào" @@ -1074,6 +1112,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào" #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c @@ -1205,21 +1245,25 @@ msgstr "Méiyǒu DAC zài xīnpiàn shàng de" msgid "No DMA channel found" msgstr "Wèi zhǎodào DMA píndào" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Méiyǒu MISO yǐn jiǎo" -#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Méiyǒu MOSI yǐn jiǎo" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Wèi zhǎodào RX yǐn jiǎo" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" @@ -1262,6 +1306,14 @@ msgstr "Wèi zhǐdìng mì yào" msgid "No long integer support" msgstr "Méiyǒu zhǎng zhěngshù zhīchí" +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more channels available" +msgstr "" + +#: ports/esp32s2/common-hal/pwmio/PWMOut.c +msgid "No more timers available" +msgstr "" + #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì." @@ -1326,6 +1378,14 @@ msgstr "Bù zhīchí jīshù" msgid "Only 8 or 16 bit mono with " msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi " +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Only IPv4 SOCK_STREAM sockets supported" +msgstr "" + +#: ports/esp32s2/common-hal/wifi/__init__.c +msgid "Only IPv4 addresses supported" +msgstr "" + #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" @@ -1347,6 +1407,10 @@ msgstr "" msgid "Only raw int supported for ip" msgstr "" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "Out of sockets" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Guò cǎiyàng bìxū shì 8 de bèishù." @@ -1362,6 +1426,7 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě." +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -1410,6 +1475,12 @@ msgstr "Zài wénjiàn xìtǒng shàng tiānjiā rènhé mókuài\n" msgid "Polygon needs at least 3 points" msgstr "Duōbiānxíng zhìshǎo xūyào 3 diǎn" +#: ports/esp32s2/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " +"instead" +msgstr "" + #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c @@ -1439,12 +1510,13 @@ msgstr "RNG qǔxiāo chūshǐhuà cuòwù" msgid "RNG Init Error" msgstr "RNG chūshǐhuà cuòwù" +#: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "Wèi chǔyú RS485 móshì shí zhǐdìngle RS485 fǎn zhuǎn" -#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c -#: ports/nrf/common-hal/rtc/RTC.c +#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c +#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Cǐ bǎn bù zhīchí RTC jiàozhǔn" @@ -1498,7 +1570,7 @@ msgstr "Zài ānquán móshì xià yùnxíng!" msgid "SD card CSD format not supported" msgstr "Bù zhīchí SD kǎ CSD géshì" -#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA huò SCL xūyào lādòng" @@ -1566,6 +1638,10 @@ msgstr "Qiēpiàn hé zhí bùtóng chángdù." msgid "Slices not supported" msgstr "Qiēpiàn bù shòu zhīchí" +#: ports/esp32s2/common-hal/socketpool/SocketPool.c +msgid "SocketPool can only be used with wifi.radio" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Yuán huǎnchōng qū hé mùbiāo huǎnchōng qū de chángdù bìxū xiāngtóng" @@ -1737,6 +1813,10 @@ msgstr "UUID zhí bùshì str,int huò zì jié huǎnchōng qū" msgid "Unable to allocate buffers for signed conversion" msgstr "Wúfǎ fēnpèi huǎnchōng qū yòng yú qiānmíng zhuǎnhuàn" +#: ports/esp32s2/common-hal/busio/I2C.c +msgid "Unable to create lock" +msgstr "" + #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" @@ -1763,6 +1843,11 @@ msgstr "Wúfǎ xiě rù nvm." msgid "Unexpected nrfx uuid type" msgstr "Yìwài de nrfx uuid lèixíng" +#: ports/esp32s2/common-hal/socketpool/Socket.c +#, c-format +msgid "Unhandled ESP TLS error %d %d %x %d" +msgstr "" + #: shared-bindings/wifi/Radio.c msgid "Unknown failure" msgstr "" @@ -1800,7 +1885,7 @@ msgstr "" "huò hūlüè." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Bù zhīchí de baudrate" @@ -2046,6 +2131,7 @@ msgid "byteorder is not a string" msgstr "byteorder bùshì zìfú chuàn" #: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "zì jié > 8 wèi" @@ -2564,7 +2650,7 @@ msgstr "bù zhèngquè de tiánchōng" msgid "index is out of bounds" msgstr "suǒyǐn chāochū fànwéi" -#: py/obj.c +#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "suǒyǐn chāochū fànwéi" @@ -3069,6 +3155,10 @@ msgstr "pixel_shader bìxū shì displayio.Palette huò displayio.ColorConverter msgid "polygon can only be registered in one parent" msgstr "duōbiānxíng zhī néng zài yīgè fù jí zhōng zhùcè" +#: ports/esp32s2/common-hal/pulseio/PulseIn.c +msgid "pop from an empty PulseIn" +msgstr "cóng kōng de PulseIn dànchū dànchū" + #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c @@ -3085,6 +3175,24 @@ msgstr "pow() 3 cān shǔ bùnéng wéi 0" msgid "pow() with 3 arguments requires integers" msgstr "pow() yǒu 3 cānshù xūyào zhěngshù" +#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +msgid "pressing boot button at start up.\n" +msgstr "" + +#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h +msgid "pressing both buttons at start up.\n" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "duìliè yìchū" @@ -3329,7 +3437,8 @@ msgstr "yuán zǔ suǒyǐn chāochū fànwéi" msgid "tuple/list has wrong length" msgstr "yuán zǔ/lièbiǎo chángdù cuòwù" -#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx hé rx bùnéng dōu shì wú" @@ -3606,9 +3715,6 @@ msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" #~ msgid "object of type '%s' has no len()" #~ msgstr "lèixíng '%s' de duìxiàng méiyǒu chángdù" -#~ msgid "pop from an empty PulseIn" -#~ msgstr "cóng kōng de PulseIn dànchū dànchū" - #~ msgid "pop from an empty set" #~ msgstr "cóng kōng jí dànchū"