diff --git a/locale/ID.po b/locale/ID.po
index 42247dae47..be3fea6022 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-07-06 18:10+0000\n"
 "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -284,7 +284,7 @@ msgstr "Alamat harus sepanjang %d byte"
 msgid "Address type out of range"
 msgstr "Jenis alamat di luar batas"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Semua perangkat I2C sedang digunakan"
 
@@ -292,11 +292,11 @@ msgstr "Semua perangkat I2C sedang digunakan"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Semua perangkat SPI sedang digunakan"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Semua perangkat UART sedang digunakan"
 
@@ -318,6 +318,9 @@ msgstr "Semua timer untuk pin ini sedang digunakan"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -337,6 +340,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "AnalogIn tidak didukung pada pin yang diberikan"
@@ -562,6 +569,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr "Tidak dapat menetapkan nilai saat arah input."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "Tidak dapat menentukan RTS atau CTS dalam mode RS485"
@@ -657,14 +665,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Tidak dapat menginisialisasi kanal"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Tidak dapat menginisialisasi timer"
 
@@ -680,6 +689,10 @@ msgstr "Tidak dapat menginisialisasi ulang timer"
 msgid "Could not restart PWM"
 msgstr "Tidak dapat memulai ulang PWM"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -771,6 +784,10 @@ msgstr "Mode kendara tidak digunakan saat arah input."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "ECB hanya beroperasi pada 16 byte di satu waktu"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -828,6 +845,10 @@ msgstr "Penyebaran yang diperluas dengan respon pindai tidak didukung."
 msgid "FFT is defined for ndarrays only"
 msgstr "FFT didefinisikan hanya untuk ndarrays"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Gagal mengirim perintah."
@@ -844,12 +865,21 @@ msgstr "Gagal untuk mengalokasikan buffer RX"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Gagal untuk megalokasikan buffer RX dari %d byte"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Gagal terhubung: kesalahan internal"
@@ -858,6 +888,10 @@ msgstr "Gagal terhubung: kesalahan internal"
 msgid "Failed to connect: timeout"
 msgstr "Gagal terhubung: habis waktu"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Gagal mengurai file MP3"
@@ -954,7 +988,7 @@ msgstr "Ukuran penyangga salah"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Kesalahan input/output"
 
@@ -1047,6 +1081,10 @@ msgstr "File tidak valid"
 msgid "Invalid format chunk size"
 msgstr "Ukuran potongan format tidak valid"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Frekuensi yang diberikan tidak valid"
@@ -1084,6 +1122,8 @@ msgstr "Pin untuk channel kanan tidak valid"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1215,21 +1255,25 @@ msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
 msgid "No DMA channel found"
 msgstr "tidak ada channel DMA ditemukan"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Tidak pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1272,6 +1316,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1336,6 +1388,14 @@ msgstr "Parity ganjil tidak didukung"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Hanya 8 atau 16 bit mono dengan "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1353,6 +1413,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1367,6 +1431,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1412,6 +1477,12 @@ msgstr "Tambahkan module apapun pada filesystem\n"
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1443,12 +1514,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
@@ -1503,7 +1575,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA atau SCL membutuhkan pull up"
@@ -1571,6 +1643,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1733,6 +1809,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Tidak dapat mengalokasikan buffer untuk signed conversion"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1759,6 +1839,11 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1794,7 +1879,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate tidak didukung"
 
@@ -2042,6 +2127,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "byte > 8 bit tidak didukung"
 
@@ -2556,7 +2642,7 @@ msgstr "lapisan (padding) tidak benar"
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "index keluar dari jangkauan"
 
@@ -3060,6 +3146,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "Muncul dari PulseIn yang kosong"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3076,6 +3166,24 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "antrian meluap (overflow)"
@@ -3319,7 +3427,8 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx dan rx keduanya tidak boleh kosong"
@@ -3555,9 +3664,6 @@ msgstr ""
 #~ msgstr ""
 #~ "Berjalan di mode aman(safe mode)! tidak menjalankan kode yang tersimpan.\n"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "Muncul dari PulseIn yang kosong"
-
 #~ msgid "struct: index out of range"
 #~ msgstr "struct: index keluar dari jangkauan"
 
diff --git a/locale/cs.po b/locale/cs.po
index 88186b8231..229abad995 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-05-24 03:22+0000\n"
 "Last-Translator: dronecz <mzuzelka@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -284,7 +284,7 @@ msgstr ""
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -292,11 +292,11 @@ msgstr ""
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr ""
 
@@ -318,6 +318,9 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -337,6 +340,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -554,6 +561,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -644,14 +652,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -667,6 +676,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -757,6 +770,10 @@ msgstr ""
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -814,6 +831,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -830,12 +851,21 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -844,6 +874,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -937,7 +971,7 @@ msgstr ""
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr ""
 
@@ -1030,6 +1064,10 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1067,6 +1105,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1198,21 +1238,25 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1255,6 +1299,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1318,6 +1370,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1335,6 +1395,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1349,6 +1413,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1394,6 +1459,12 @@ msgstr ""
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1423,12 +1494,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
@@ -1482,7 +1554,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
@@ -1550,6 +1622,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1712,6 +1788,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1738,6 +1818,11 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1773,7 +1858,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2013,6 +2098,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr ""
 
@@ -2527,7 +2613,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -3030,6 +3116,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3046,6 +3136,24 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3288,7 +3396,8 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/de_DE.po b/locale/de_DE.po
index 1fd1861095..f7d8377e9d 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-06-16 18:24+0000\n"
 "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n"
 "Language: de_DE\n"
@@ -283,7 +283,7 @@ msgstr "Die Adresse muss %d Bytes lang sein"
 msgid "Address type out of range"
 msgstr "Adresstyp außerhalb des zulässigen Bereichs"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Alle I2C-Peripheriegeräte sind in Benutzung"
 
@@ -291,11 +291,11 @@ msgstr "Alle I2C-Peripheriegeräte sind in Benutzung"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Alle SPI-Peripheriegeräte sind in Benutzung"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Alle UART-Peripheriegeräte sind in Benutzung"
 
@@ -317,6 +317,9 @@ msgstr "Alle timer für diesen Pin werden bereits benutzt"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -336,6 +339,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "AnalogIn ist an diesem Pin nicht unterstützt"
@@ -558,6 +565,7 @@ msgstr "Reset zum bootloader nicht möglich da bootloader nicht vorhanden."
 msgid "Cannot set value when direction is input."
 msgstr "Der Wert kann nicht gesetzt werden, wenn die Richtung input ist."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "RTS oder CTS können im RS485-Modus nicht angegeben werden"
@@ -654,14 +662,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Kanal konnte nicht initialisiert werden"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Timer konnte nicht initialisiert werden"
 
@@ -677,6 +686,10 @@ msgstr "Timer konnte nicht neu gestartet werden"
 msgid "Could not restart PWM"
 msgstr "PWM konnte nicht neu gestartet werden"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -767,6 +780,10 @@ msgstr "Drive mode wird nicht verwendet, wenn die Richtung input ist."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "Die EZB arbeitet jeweils nur mit 16 Bytes"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -825,6 +842,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr "FFT ist nur für ndarrays definiert"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Kommando nicht gesendet."
@@ -841,12 +862,21 @@ msgstr "Konnte keinen RX Buffer allozieren"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Konnte keine RX Buffer mit %d allozieren"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Verbindung fehlgeschlagen: interner Fehler"
@@ -855,6 +885,10 @@ msgstr "Verbindung fehlgeschlagen: interner Fehler"
 msgid "Failed to connect: timeout"
 msgstr "Verbindung nicht erfolgreich: timeout"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Parsen der MP3 Datei fehlgeschlagen"
@@ -954,7 +988,7 @@ msgstr "Inkorrekte Puffergröße"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Eingabe-/Ausgabefehler"
 
@@ -1047,6 +1081,10 @@ msgstr "Ungültige Datei"
 msgid "Invalid format chunk size"
 msgstr "Ungültige format chunk size"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Ungültige Frequenz geliefert"
@@ -1084,6 +1122,8 @@ msgstr "Ungültiger Pin für rechten Kanal"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1217,21 +1257,25 @@ msgstr "Kein DAC im Chip vorhanden"
 msgid "No DMA channel found"
 msgstr "Kein DMA Kanal gefunden"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Kein MISO Pin"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Kein MOSI Pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Kein RX Pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1274,6 +1318,14 @@ msgstr "Es wurde kein Schlüssel angegeben"
 msgid "No long integer support"
 msgstr "Keine langen Integer (long) unterstützt"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "An diesem Pin sind keine Timer mehr verfügbar."
@@ -1339,6 +1391,14 @@ msgstr "Eine ungerade Parität wird nicht unterstützt"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Nur 8 oder 16 bit mono mit "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1360,6 +1420,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Oversample muss ein Vielfaches von 8 sein."
@@ -1374,6 +1438,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1422,6 +1487,12 @@ msgstr "und alle Module im Dateisystem \n"
 msgid "Polygon needs at least 3 points"
 msgstr "Polygone brauchen mindestens 3 Punkte"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1453,12 +1524,13 @@ msgstr "RNG DeInit-Fehler"
 msgid "RNG Init Error"
 msgstr "RNG Init Fehler"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr "RS485-Inversion angegeben, wenn nicht im RS485-Modus"
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "Die RTC-Kalibrierung wird auf diesem Board nicht unterstützt"
 
@@ -1512,7 +1584,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA oder SCL brauchen pull up"
@@ -1580,6 +1652,10 @@ msgstr "Slice und Wert (value) haben unterschiedliche Längen."
 msgid "Slices not supported"
 msgstr "Slices werden nicht unterstützt"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Quell- und Zielbuffer müssen gleich lang sein"
@@ -1756,6 +1832,10 @@ msgstr "Der UUID-Wert ist kein str-, int- oder Byte-Puffer"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Konnte keine Buffer für Vorzeichenumwandlung allozieren"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1782,6 +1862,11 @@ msgstr "Schreiben in nvm nicht möglich."
 msgid "Unexpected nrfx uuid type"
 msgstr "Unerwarteter nrfx uuid-Typ"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1821,7 +1906,7 @@ msgstr ""
 "Eingabeaufforderung auf dem anderen Gerät abgelehnt oder ignoriert."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate wird nicht unterstützt"
 
@@ -2070,6 +2155,7 @@ msgid "byteorder is not a string"
 msgstr "Byteorder ist kein String"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "bytes mit mehr als 8 bits werden nicht unterstützt"
 
@@ -2598,7 +2684,7 @@ msgstr "padding ist inkorrekt"
 msgid "index is out of bounds"
 msgstr "Index ist außerhalb der Grenzen"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "index außerhalb der Reichweite"
 
@@ -3111,6 +3197,10 @@ msgstr "pixel_shader muss displayio.Palette oder displayio.ColorConverter sein"
 msgid "polygon can only be registered in one parent"
 msgstr "Polygon kann nur in einem übergeordneten Element registriert werden"
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop von einem leeren PulseIn"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3127,6 +3217,24 @@ msgstr "pow() drittes Argument darf nicht 0 sein"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow () mit 3 Argumenten erfordert Integer"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "Warteschlangenüberlauf"
@@ -3372,7 +3480,8 @@ msgstr "Tupelindex außerhalb des Bereichs"
 msgid "tuple/list has wrong length"
 msgstr "tupel/list hat falsche Länge"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx und rx können nicht beide None sein"
@@ -3656,9 +3765,6 @@ msgstr ""
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "Objekt vom Typ '%s' hat keine len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop von einem leeren PulseIn"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop von einer leeren Menge (set)"
 
diff --git a/locale/el.po b/locale/el.po
index 6732ddfdc5..78487c521f 100644
--- a/locale/el.po
+++ b/locale/el.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -279,7 +279,7 @@ msgstr ""
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -287,11 +287,11 @@ msgstr ""
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr ""
 
@@ -313,6 +313,9 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -332,6 +335,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -549,6 +556,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -639,14 +647,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -662,6 +671,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -752,6 +765,10 @@ msgstr ""
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -809,6 +826,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -825,12 +846,21 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -839,6 +869,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -932,7 +966,7 @@ msgstr ""
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr ""
 
@@ -1025,6 +1059,10 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1062,6 +1100,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1193,21 +1233,25 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1250,6 +1294,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1313,6 +1365,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1330,6 +1390,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1344,6 +1408,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1389,6 +1454,12 @@ msgstr ""
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1418,12 +1489,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
@@ -1477,7 +1549,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
@@ -1545,6 +1617,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1707,6 +1783,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1733,6 +1813,11 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1768,7 +1853,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2008,6 +2093,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr ""
 
@@ -2522,7 +2608,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -3025,6 +3111,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3041,6 +3131,24 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3283,7 +3391,8 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/es.po b/locale/es.po
index 69a5f05946..bb0aaa0025 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-09-25 18:20+0000\n"
 "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
 "Language-Team: \n"
@@ -287,7 +287,7 @@ msgstr "La dirección debe ser %d bytes de largo"
 msgid "Address type out of range"
 msgstr "Tipo de dirección fuera de rango"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Todos los periféricos I2C están siendo usados"
 
@@ -295,11 +295,11 @@ msgstr "Todos los periféricos I2C están siendo usados"
 msgid "All RX FIFOs in use"
 msgstr "Todos los FIFOs de RX en uso"
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Todos los periféricos SPI están siendo usados"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Todos los periféricos UART están siendo usados"
 
@@ -323,6 +323,9 @@ msgstr "Todos los timers para este pin están siendo utilizados"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -342,6 +345,10 @@ msgstr "Ya se tiene un escucha todas-las-coincidencias"
 msgid "Already running"
 msgstr "Ya está en ejecución"
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "El pin proporcionado no soporta AnalogIn"
@@ -565,6 +572,7 @@ msgstr "No se puede reiniciar a bootloader porque no hay bootloader presente."
 msgid "Cannot set value when direction is input."
 msgstr "No se puede asignar un valor cuando la dirección es input."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "No se puede especificar RTS o CTS en modo RS485"
@@ -659,14 +667,15 @@ msgid "Could not initialize SDCard"
 msgstr "No se pudo inicializar SDCard"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "No se pudo inicializar el canal"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "No se pudo inicializar el temporizador"
 
@@ -682,6 +691,10 @@ msgstr "No se pudo reiniciar el temporizador"
 msgid "Could not restart PWM"
 msgstr "No se pudo reiniciar el PWM"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "No se puede definir la dirección"
@@ -772,6 +785,10 @@ msgstr "Modo Drive no se usa cuando la dirección es input."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "ECB solo opera sobre 16 bytes a la vez"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -829,6 +846,10 @@ msgstr "No se admiten anuncios extendidos con respuesta de escaneo."
 msgid "FFT is defined for ndarrays only"
 msgstr "FFT se define solo para ndarrays"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Fallo enviando comando."
@@ -845,12 +866,21 @@ msgstr "Ha fallado la asignación del buffer RX"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Falló la asignación del buffer RX de %d bytes"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Error al conectar: error interno"
@@ -859,6 +889,10 @@ msgstr "Error al conectar: error interno"
 msgid "Failed to connect: timeout"
 msgstr "Error al conectar: tiempo de espera agotado"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Error al analizar el archivo MP3"
@@ -955,7 +989,7 @@ msgstr "Tamaño incorrecto del buffer"
 msgid "Input taking too long"
 msgstr "La entrada está durando mucho tiempo"
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "error Input/output"
 
@@ -1048,6 +1082,10 @@ msgstr "Archivo inválido"
 msgid "Invalid format chunk size"
 msgstr "Formato de fragmento de formato no válido"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Frecuencia suministrada no válida"
@@ -1085,6 +1123,8 @@ msgstr "Pin inválido para canal derecho"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1216,21 +1256,25 @@ msgstr "El chip no tiene DAC"
 msgid "No DMA channel found"
 msgstr "No se encontró el canal DMA"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Sin pin MISO"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Sin pin MOSI"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Sin pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1273,6 +1317,14 @@ msgstr "No se especificó ninguna llave"
 msgid "No long integer support"
 msgstr "No hay soporte de entero largo"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "No hay más temporizadores disponibles en este pin."
@@ -1338,6 +1390,14 @@ msgstr "Paridad impar no soportada"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Solo mono de 8 ó 16 bit con "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1359,6 +1419,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr "Solo se aceptan enteros crudos para ip"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "El sobremuestreo debe ser un múltiplo de 8."
@@ -1375,6 +1439,7 @@ msgstr ""
 "La frecuencia de PWM no se puede escribir variable_frequency es False en la "
 "construcción."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1422,6 +1487,12 @@ msgstr "Además de cualquier módulo en el sistema de archivos\n"
 msgid "Polygon needs at least 3 points"
 msgstr "El polígono necesita al menos 3 puntos"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1454,12 +1525,13 @@ msgstr "Error de desinicializado del RNG"
 msgid "RNG Init Error"
 msgstr "Error de inicialización de RNG"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr "Se especifica inversión de RS485 sin estar en modo RS485"
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "Calibración de RTC no es soportada en esta placa"
 
@@ -1513,7 +1585,7 @@ msgstr "¡Corriendo en modo seguro! "
 msgid "SD card CSD format not supported"
 msgstr "Sin capacidad para formato CSD para tarjeta SD"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necesitan una pull up"
@@ -1581,6 +1653,10 @@ msgstr "Slice y value tienen tamaños diferentes."
 msgid "Slices not supported"
 msgstr "Rebanadas no soportadas"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Los búferes de fuente y destino deben ser del mismo tamaño"
@@ -1757,6 +1833,10 @@ msgstr "UUID valor no es un str, int o byte buffer"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "No se pudieron asignar buffers para la conversión con signo"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1783,6 +1863,11 @@ msgstr "Imposible escribir en nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr "Tipo de uuid nrfx inesperado"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr "Fallo desconocido"
@@ -1820,7 +1905,7 @@ msgstr ""
 "dispositivo fue declinada o ignorada."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate no soportado"
 
@@ -2069,6 +2154,7 @@ msgid "byteorder is not a string"
 msgstr "byteorder no es una cadena"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits no soportados"
 
@@ -2590,7 +2676,7 @@ msgstr "relleno (padding) incorrecto"
 msgid "index is out of bounds"
 msgstr "el índice está fuera de límites"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "index fuera de rango"
 
@@ -3099,6 +3185,10 @@ msgstr "pixel_shader debe ser displayio.Palette o displayio.ColorConverter"
 msgid "polygon can only be registered in one parent"
 msgstr "el polígono solo se puede registrar en uno de los padres"
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop de un PulseIn vacío"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3115,6 +3205,24 @@ msgstr "el 3er argumento de pow() no puede ser 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() con 3 argumentos requiere enteros"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "desbordamiento de cola(queue)"
@@ -3360,7 +3468,8 @@ msgstr "tuple index fuera de rango"
 msgid "tuple/list has wrong length"
 msgstr "tupla/lista tiene una longitud incorrecta"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "Ambos tx y rx no pueden ser None"
@@ -3644,9 +3753,6 @@ msgstr "zi debe ser una forma (n_section,2)"
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "el objeto de tipo '%s' no tiene len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop de un PulseIn vacío"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop desde un set vacío"
 
diff --git a/locale/fil.po b/locale/fil.po
index 0b8ead16d1..48d17e0701 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -281,7 +281,7 @@ msgstr "ang palette ay dapat 32 bytes ang haba"
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
 
@@ -289,11 +289,11 @@ msgstr "Lahat ng I2C peripherals ginagamit"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Lahat ng SPI peripherals ay ginagamit"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #, fuzzy
 msgid "All UART peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
@@ -316,6 +316,9 @@ msgstr "Lahat ng timers para sa pin na ito ay ginagamit"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -335,6 +338,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -556,6 +563,7 @@ msgstr "Hindi ma-reset sa bootloader dahil walang bootloader."
 msgid "Cannot set value when direction is input."
 msgstr "Hindi ma i-set ang value kapag ang direksyon ay input."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -647,14 +655,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -670,6 +679,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -763,6 +776,10 @@ msgstr "Drive mode ay hindi ginagamit kapag ang direksyon ay input."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -822,6 +839,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -838,12 +859,21 @@ msgstr "Nabigong ilaan ang RX buffer"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Nabigong ilaan ang RX buffer ng %d bytes"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -852,6 +882,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -947,7 +981,7 @@ msgstr ""
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "May mali sa Input/Output"
 
@@ -1040,6 +1074,10 @@ msgstr "Mali ang file"
 msgid "Invalid format chunk size"
 msgstr "Mali ang format ng chunk size"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1077,6 +1115,8 @@ msgstr "Mali ang pin para sa kanang channel"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1208,21 +1248,25 @@ msgstr "Walang DAC sa chip"
 msgid "No DMA channel found"
 msgstr "Walang DMA channel na mahanap"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Walang RX pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1265,6 +1309,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1331,6 +1383,14 @@ msgstr "Odd na parity ay hindi supportado"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Tanging 8 o 16 na bit mono na may "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1348,6 +1408,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Oversample ay dapat multiple ng 8."
@@ -1363,6 +1427,7 @@ msgid ""
 msgstr ""
 "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1408,6 +1473,12 @@ msgstr "Kasama ang kung ano pang modules na sa filesystem\n"
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1439,12 +1510,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "RTC calibration ay hindi supportado ng board na ito"
 
@@ -1499,7 +1571,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "Kailangan ng pull up resistors ang SDA o SCL"
@@ -1567,6 +1639,10 @@ msgstr "Slice at value iba't ibang haba."
 msgid "Slices not supported"
 msgstr "Hindi suportado ang Slices"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1729,6 +1805,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Hindi ma-allocate ang buffers para sa naka-sign na conversion"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1756,6 +1836,11 @@ msgstr "Hindi ma i-sulat sa NVM."
 msgid "Unexpected nrfx uuid type"
 msgstr "hindi inaasahang indent"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1791,7 +1876,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Hindi supportadong baudrate"
 
@@ -2041,6 +2126,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "hindi sinusuportahan ang bytes > 8 bits"
 
@@ -2567,7 +2653,7 @@ msgstr "mali ang padding"
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "index wala sa sakop"
 
@@ -3076,6 +3162,10 @@ msgstr "pixel_shader ay dapat displayio.Palette o displayio.ColorConverter"
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop mula sa walang laman na PulseIn"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3092,6 +3182,24 @@ msgstr "pow() 3rd argument ay hindi maaring 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() na may 3 argumento kailangan ng integers"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "puno na ang pila (overflow)"
@@ -3338,7 +3446,8 @@ msgstr "indeks ng tuple wala sa sakop"
 msgid "tuple/list has wrong length"
 msgstr "mali ang haba ng tuple/list"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx at rx hindi pwedeng parehas na None"
@@ -3589,9 +3698,6 @@ msgstr ""
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "object na type '%s' walang len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop mula sa walang laman na PulseIn"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop sa walang laman na set"
 
diff --git a/locale/fr.po b/locale/fr.po
index bea085d1e3..6824816b48 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-09-16 13:47+0000\n"
 "Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n"
 "Language: fr\n"
@@ -288,7 +288,7 @@ msgstr "L'adresse doit être longue de %d octets"
 msgid "Address type out of range"
 msgstr "Type d'adresse hors plage"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Tous les périphériques I2C sont utilisés"
 
@@ -296,11 +296,11 @@ msgstr "Tous les périphériques I2C sont utilisés"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Tous les périphériques SPI sont utilisés"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Tous les périphériques UART sont utilisés"
 
@@ -322,6 +322,9 @@ msgstr "Tous les timers pour cette broche sont utilisés"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -341,6 +344,10 @@ msgstr ""
 msgid "Already running"
 msgstr "Déjà en cours d'exécution"
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée"
@@ -567,6 +574,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr "Impossible d'affecter une valeur quand la direction est 'input'."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "Impossible de spécifier RTS ou CTS en mode RS485"
@@ -663,14 +671,15 @@ msgid "Could not initialize SDCard"
 msgstr "Impossible d'initialiser la carte SD"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Impossible d'initialiser la chaîne"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Impossible d'initialiser la minuterie"
 
@@ -686,6 +695,10 @@ msgstr "Impossible de réinitialiser le minuteur"
 msgid "Could not restart PWM"
 msgstr "Impossible de redémarrer PWM"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -776,6 +789,10 @@ msgstr "Le mode Drive n'est pas utilisé quand la direction est 'input'."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "La BCE ne fonctionne que sur 16 octets à la fois"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -834,6 +851,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr "La FFT est définie pour les ndarrays uniquement"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Échec de l'envoi de la commande."
@@ -850,12 +871,21 @@ msgstr "Echec de l'allocation du tampon RX"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Echec de l'allocation de %d octets du tampon RX"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Impossible de se connecter : erreur interne"
@@ -864,6 +894,10 @@ msgstr "Impossible de se connecter : erreur interne"
 msgid "Failed to connect: timeout"
 msgstr "Impossible de se connecter : délai d'expiration"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Impossible d'analyser le fichier MP3"
@@ -960,7 +994,7 @@ msgstr "Taille de tampon incorrecte"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Erreur d'entrée/sortie"
 
@@ -1053,6 +1087,10 @@ msgstr "Fichier invalide"
 msgid "Invalid format chunk size"
 msgstr "Taille de bloc de formatage invalide"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Fréquence invalide fournie"
@@ -1090,6 +1128,8 @@ msgstr "Broche invalide pour le canal droit"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1221,21 +1261,25 @@ msgstr "Pas de DAC sur la puce"
 msgid "No DMA channel found"
 msgstr "Aucun canal DMA trouvé"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Pas de broche MISO"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Pas de broche MOSI"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Pas de broche RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1278,6 +1322,14 @@ msgstr "Aucune clé n'a été spécifiée"
 msgid "No long integer support"
 msgstr "Pas de support entier long"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "Plus de minuteurs disponibles sur cette broche."
@@ -1343,6 +1395,14 @@ msgstr "Parité impaire non supportée"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Uniquement 8 ou 16 bit mono avec "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1364,6 +1424,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Le sur-échantillonage doit être un multiple de 8."
@@ -1382,6 +1446,7 @@ msgstr ""
 "La fréquence de PWM n'est pas modifiable quand variable_frequency est False "
 "à la construction."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1430,6 +1495,12 @@ msgstr "Ainsi que tout autre module présent sur le système de fichiers\n"
 msgid "Polygon needs at least 3 points"
 msgstr "Polygone a besoin d’au moins 3 points"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1459,12 +1530,13 @@ msgstr "Erreur RNG DeInit"
 msgid "RNG Init Error"
 msgstr "Erreur d'initialisation RNG"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr "Inversion RS485 spécifiée lorsqu'elle n'est pas en mode RS485"
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "étalonnage de la RTC non supportée sur cette carte"
 
@@ -1518,7 +1590,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr "Le format de carte SD CSD n'est pas pris en charge"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')"
@@ -1586,6 +1658,10 @@ msgstr "Tranche et valeur de tailles différentes."
 msgid "Slices not supported"
 msgstr "Tranches non supportées"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Les tampons source et de destination doivent être de la même longueur"
@@ -1761,6 +1837,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Impossible d'allouer des tampons pour une conversion signée"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1787,6 +1867,11 @@ msgstr "Impossible d'écrire sur la mémoire non-volatile."
 msgid "Unexpected nrfx uuid type"
 msgstr "Type inattendu pour l'uuid nrfx"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1825,7 +1910,7 @@ msgstr ""
 "appareil ait été refusée ou ignorée."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Débit non supporté"
 
@@ -2075,6 +2160,7 @@ msgid "byteorder is not a string"
 msgstr "byteorder n'est pas une chaîne"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "octets > 8 bits non supporté"
 
@@ -2606,7 +2692,7 @@ msgstr "espacement incorrect"
 msgid "index is out of bounds"
 msgstr "l'index est hors limites"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "index hors gamme"
 
@@ -3119,6 +3205,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr "le polygone ne peut être enregistré que dans un parent"
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "'pop' d'une entrée PulseIn vide"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3135,6 +3225,24 @@ msgstr "le 3e argument de pow() ne peut être 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() avec 3 arguments nécessite des entiers"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "dépassement de file"
@@ -3380,7 +3488,8 @@ msgstr "index du tuple hors gamme"
 msgid "tuple/list has wrong length"
 msgstr "tuple/liste a une mauvaise longueur"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx et rx ne peuvent être 'None' tous les deux"
@@ -3663,9 +3772,6 @@ msgstr ""
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "l'objet de type '%s' n'a pas de len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "'pop' d'une entrée PulseIn vide"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "'pop' d'un ensemble set vide"
 
diff --git a/locale/hi.po b/locale/hi.po
index 137e44eed3..66f8e4865e 100644
--- a/locale/hi.po
+++ b/locale/hi.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -279,7 +279,7 @@ msgstr ""
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -287,11 +287,11 @@ msgstr ""
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr ""
 
@@ -313,6 +313,9 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -332,6 +335,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -549,6 +556,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -639,14 +647,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -662,6 +671,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -752,6 +765,10 @@ msgstr ""
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -809,6 +826,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -825,12 +846,21 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -839,6 +869,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -932,7 +966,7 @@ msgstr ""
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr ""
 
@@ -1025,6 +1059,10 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1062,6 +1100,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1193,21 +1233,25 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1250,6 +1294,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1313,6 +1365,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1330,6 +1390,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1344,6 +1408,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1389,6 +1454,12 @@ msgstr ""
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1418,12 +1489,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
@@ -1477,7 +1549,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
@@ -1545,6 +1617,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1707,6 +1783,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1733,6 +1813,11 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1768,7 +1853,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2008,6 +2093,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr ""
 
@@ -2522,7 +2608,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -3025,6 +3111,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3041,6 +3131,24 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3283,7 +3391,8 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 537c6effd9..2377c1a2f1 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -280,7 +280,7 @@ msgstr "la palette deve essere lunga 32 byte"
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
 
@@ -288,11 +288,11 @@ msgstr "Tutte le periferiche I2C sono in uso"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Tutte le periferiche SPI sono in uso"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #, fuzzy
 msgid "All UART peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
@@ -315,6 +315,9 @@ msgstr "Tutti i timer per questo pin sono in uso"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -334,6 +337,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -557,6 +564,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr "non si può impostare un valore quando direzione è input"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -648,14 +656,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -671,6 +680,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -763,6 +776,10 @@ msgstr ""
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -822,6 +839,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -838,12 +859,21 @@ msgstr "Impossibile allocare buffer RX"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Fallita allocazione del buffer RX di %d byte"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -852,6 +882,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -947,7 +981,7 @@ msgstr ""
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Errore input/output"
 
@@ -1042,6 +1076,10 @@ msgstr "File non valido"
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1079,6 +1117,8 @@ msgstr "Pin non valido per il canale destro"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1212,21 +1252,25 @@ msgstr "Nessun DAC sul chip"
 msgid "No DMA channel found"
 msgstr "Nessun canale DMA trovato"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Nessun pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1269,6 +1313,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1336,6 +1388,14 @@ msgstr "operazione I2C non supportata"
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1353,6 +1413,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "L'oversampling deve essere multiplo di 8."
@@ -1372,6 +1436,7 @@ msgstr ""
 "frequenza PWM frequency non è scrivibile quando variable_frequency è "
 "impostato nel costruttore a False."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1418,6 +1483,12 @@ msgstr "Imposssibile rimontare il filesystem"
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1448,12 +1519,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "calibrazione RTC non supportata su questa scheda"
 
@@ -1508,7 +1580,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necessitano un pull-up"
@@ -1578,6 +1650,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr "Slice non supportate"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1740,6 +1816,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Ipossibilitato ad allocare buffer per la conversione con segno"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1767,6 +1847,11 @@ msgstr "Imposibile scrivere su nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr "indentazione inaspettata"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1802,7 +1887,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "baudrate non supportato"
 
@@ -2046,6 +2131,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "byte > 8 bit non supportati"
 
@@ -2568,7 +2654,7 @@ msgstr "padding incorretto"
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "indice fuori intervallo"
 
@@ -3083,6 +3169,10 @@ msgstr "pixel_shader deve essere displayio.Palette o displayio.ColorConverter"
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop sun un PulseIn vuoto"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3099,6 +3189,24 @@ msgstr "il terzo argomento di pow() non può essere 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() con 3 argomenti richiede interi"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "overflow della coda"
@@ -3345,7 +3453,8 @@ msgstr "indice della tupla fuori intervallo"
 msgid "tuple/list has wrong length"
 msgstr "tupla/lista ha la lunghezza sbagliata"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx e rx non possono essere entrambi None"
@@ -3597,9 +3706,6 @@ msgstr ""
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "l'oggetto di tipo '%s' non implementa len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop sun un PulseIn vuoto"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop da un set vuoto"
 
diff --git a/locale/ja.po b/locale/ja.po
index bf53151ad5..d5e2015f4b 100644
--- a/locale/ja.po
+++ b/locale/ja.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-09-25 18:20+0000\n"
 "Last-Translator: Taku Fukada <naninunenor@gmail.com>\n"
 "Language-Team: none\n"
@@ -286,7 +286,7 @@ msgstr "アドレスは、%dバイト長でなければなりません"
 msgid "Address type out of range"
 msgstr "address_typeが範囲外"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "全てのI2C周辺機器が使用中"
 
@@ -294,11 +294,11 @@ msgstr "全てのI2C周辺機器が使用中"
 msgid "All RX FIFOs in use"
 msgstr "全てのRX FIFOが使用中"
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "全てのSPI周辺機器が使用中"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "全てのUART周辺機器が使用中"
 
@@ -320,6 +320,9 @@ msgstr "このピン用の全てのタイマが使用中"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -339,6 +342,10 @@ msgstr ""
 msgid "Already running"
 msgstr "すでに実行中"
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "指定のピンはAnalogInに対応していません"
@@ -560,6 +567,7 @@ msgstr "ブートローダが存在しないためブートローダへとリセ
 msgid "Cannot set value when direction is input."
 msgstr "方向がinputのときは値を設定できません"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "RS485モードにRTSまたはCTSを指定できません"
@@ -652,14 +660,15 @@ msgid "Could not initialize SDCard"
 msgstr "SDカードを初期化できません"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "UARTを初期化できません"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "チャネルを初期化できません"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "タイマーを初期化できません"
 
@@ -675,6 +684,10 @@ msgstr "タイマーを再初期化できません"
 msgid "Could not restart PWM"
 msgstr "PWMを再スタートできません"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "アドレスをセットできません"
@@ -765,6 +778,10 @@ msgstr "方向がinputのときドライブモードは使われません"
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "ECBは一度に16バイトの演算のみを行います"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -822,6 +839,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr "FFTはndarrayでのみ使えます"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "コマンド送信に失敗"
@@ -838,12 +859,21 @@ msgstr "RXバッファの確保に失敗"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "%dバイトのRXバッファの確保に失敗"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "接続失敗: 内部エラー"
@@ -852,6 +882,10 @@ msgstr "接続失敗: 内部エラー"
 msgid "Failed to connect: timeout"
 msgstr "接続失敗: タイムアウト"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "MP3ファイルのパーズに失敗"
@@ -947,7 +981,7 @@ msgstr "バッファサイズが正しくありません"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "入力/出力エラー"
 
@@ -1040,6 +1074,10 @@ msgstr "不正なファイル"
 msgid "Invalid format chunk size"
 msgstr "フォーマットチャンクのサイズが不正"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "不正な周波数が与えられました"
@@ -1077,6 +1115,8 @@ msgstr "右チャネルのピンが不正"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1208,21 +1248,25 @@ msgstr "チップにDACがありません"
 msgid "No DMA channel found"
 msgstr "DMAチャネルが見つかりません"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "MISOピンなし"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "MOSIピンがありません"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "RXピンがありません"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1265,6 +1309,14 @@ msgstr "キーが指定されていません"
 msgid "No long integer support"
 msgstr "long integerに対応していません"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "このピンには使えるタイマーがもうありません"
@@ -1330,6 +1382,14 @@ msgstr "奇数パリティには対応していません"
 msgid "Only 8 or 16 bit mono with "
 msgstr "8または16ビットの "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1347,6 +1407,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "オーバーサンプルは8の倍数でなければなりません"
@@ -1362,6 +1426,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "PWM周波数は生成時のvariable_frequencyがFalseのとき書き換え不可"
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1407,6 +1472,12 @@ msgstr ""
 msgid "Polygon needs at least 3 points"
 msgstr "ポリゴンには少なくとも3つの点が必要"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1436,12 +1507,13 @@ msgstr "RNG解体エラー"
 msgid "RNG Init Error"
 msgstr "乱数生成器の初期化エラー"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "このボードはRTCのキャリブレーションに非対応"
 
@@ -1495,7 +1567,7 @@ msgstr "セーフモードで実行中！ "
 msgid "SD card CSD format not supported"
 msgstr "SDカードのCSDフォーマットは非対応"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDAとSCLにプルアップが必要"
@@ -1563,6 +1635,10 @@ msgstr "スライスと値の長さが一致しません"
 msgid "Slices not supported"
 msgstr "スライスは対応していません"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "バッファ (元/先) は同じ長さでなければなりません"
@@ -1732,6 +1808,10 @@ msgstr "UUIDの値がstr, int, bufferのいずれでもありません"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1758,6 +1838,11 @@ msgstr "nvmに書き込みできません"
 msgid "Unexpected nrfx uuid type"
 msgstr "想定されていないnrfx UUID型"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1793,7 +1878,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "非対応のbaudrate"
 
@@ -2033,6 +2118,7 @@ msgid "byteorder is not a string"
 msgstr "byteorderが文字列ではありません"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr ""
 
@@ -2551,7 +2637,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "インデクスが範囲外"
 
@@ -3057,6 +3143,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3073,6 +3163,24 @@ msgstr "pow()の3つ目の引数は0にできません"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow()の第3引数には整数が必要"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "キューがオーバーフローしました"
@@ -3316,7 +3424,8 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr "タプル/リストの長さが正しくありません"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "txとrxを両方ともNoneにできません"
diff --git a/locale/ko.po b/locale/ko.po
index f5ac77e906..23396a96e9 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2019-05-06 14:22-0700\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -280,7 +280,7 @@ msgstr ""
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "사용중인 모든 I2C주변 기기"
 
@@ -288,11 +288,11 @@ msgstr "사용중인 모든 I2C주변 기기"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "사용중인 모든 SPI주변 기기"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "사용중인 모든 UART주변 기기"
 
@@ -314,6 +314,9 @@ msgstr "핀의 모든 타이머가 사용 중입니다"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -333,6 +336,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr ""
@@ -552,6 +559,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr ""
@@ -642,14 +650,15 @@ msgid "Could not initialize SDCard"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr ""
 
@@ -665,6 +674,10 @@ msgstr ""
 msgid "Could not restart PWM"
 msgstr ""
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr ""
@@ -755,6 +768,10 @@ msgstr ""
 msgid "ECB only operates on 16 bytes at a time"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -812,6 +829,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -828,12 +849,21 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -842,6 +872,10 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
@@ -935,7 +969,7 @@ msgstr ""
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr ""
 
@@ -1028,6 +1062,10 @@ msgstr "파일이 유효하지 않습니다"
 msgid "Invalid format chunk size"
 msgstr "형식 청크 크기가 잘못되었습니다"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr ""
@@ -1065,6 +1103,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1196,21 +1236,25 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1253,6 +1297,14 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1316,6 +1368,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1333,6 +1393,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1347,6 +1411,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1392,6 +1457,12 @@ msgstr ""
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1421,12 +1492,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
@@ -1480,7 +1552,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
@@ -1548,6 +1620,10 @@ msgstr ""
 msgid "Slices not supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr ""
@@ -1711,6 +1787,10 @@ msgstr ""
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1737,6 +1817,11 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1772,7 +1857,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2012,6 +2097,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr ""
 
@@ -2526,7 +2612,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -3029,6 +3115,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3045,6 +3135,24 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3287,7 +3395,8 @@ msgstr ""
 msgid "tuple/list has wrong length"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/nl.po b/locale/nl.po
index d9468c7b9e..cffbee62e6 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-09-09 16:05+0000\n"
 "Last-Translator: Jelle Jager <jell@jjc.id.au>\n"
 "Language-Team: none\n"
@@ -284,7 +284,7 @@ msgstr "Adres moet %d bytes lang zijn"
 msgid "Address type out of range"
 msgstr "Adres type buiten bereik"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Alle I2C peripherals zijn in gebruik"
 
@@ -292,11 +292,11 @@ msgstr "Alle I2C peripherals zijn in gebruik"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Alle SPI peripherals zijn in gebruik"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Alle UART peripherals zijn in gebruik"
 
@@ -318,6 +318,9 @@ msgstr "Alle timers voor deze pin zijn in gebruik"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -337,6 +340,10 @@ msgstr ""
 msgid "Already running"
 msgstr "Wordt al uitgevoerd"
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "AnalogIn niet ondersteund door gegeven pin"
@@ -558,6 +565,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr "Kan de waarde niet toewijzen als de richting input is."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "Kan RTS of CTS niet specificeren in RS485 modus"
@@ -652,14 +660,15 @@ msgid "Could not initialize SDCard"
 msgstr "Kan SDCard niet initialiseren"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Kan UART niet initialiseren"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Kan kanaal niet initialiseren"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Kan timer niet initialiseren"
 
@@ -675,6 +684,10 @@ msgstr "Kan timer niet her-initialiseren"
 msgid "Could not restart PWM"
 msgstr "Kan PWM niet herstarten"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Kan adres niet zetten"
@@ -765,6 +778,10 @@ msgstr "Drive modus niet gebruikt als de richting input is."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "ECB werkt alleen met 16 bytes tegelijkertijd"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -822,6 +839,10 @@ msgstr "Extended advertisements met scan antwoord niet ondersteund."
 msgid "FFT is defined for ndarrays only"
 msgstr "FFT alleen voor ndarrays gedefineerd"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Commando verzenden mislukt."
@@ -838,12 +859,21 @@ msgstr "RX buffer alloceren mislukt"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Mislukt een RX buffer van %d bytes te alloceren"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Verbinding mislukt: interne fout"
@@ -852,6 +882,10 @@ msgstr "Verbinding mislukt: interne fout"
 msgid "Failed to connect: timeout"
 msgstr "Verbinding mislukt: timeout"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Mislukt om MP3 bestand te ontleden"
@@ -949,7 +983,7 @@ msgstr "Incorrecte buffer grootte"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Input/Output fout"
 
@@ -1042,6 +1076,10 @@ msgstr "Ongeldig bestand"
 msgid "Invalid format chunk size"
 msgstr "Ongeldig formaat stuk grootte"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Ongeldige frequentie opgegeven"
@@ -1079,6 +1117,8 @@ msgstr "Ongeldige pin voor rechter kanaal"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1210,21 +1250,25 @@ msgstr "Geen DAC op de chip"
 msgid "No DMA channel found"
 msgstr "Geen DMA kanaal gevonden"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Geen MISO pin"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Geen MOSI pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Geen RX pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1267,6 +1311,14 @@ msgstr "Een sleutel was niet gespecificeerd"
 msgid "No long integer support"
 msgstr "Geen lange integer ondersteuning"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "Geen timers meer beschikbaar op deze pin."
@@ -1332,6 +1384,14 @@ msgstr "Oneven pariteit is niet ondersteund"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Alleen 8 of 16 bit mono met "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1353,6 +1413,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Oversample moet een meervoud van 8 zijn."
@@ -1370,6 +1434,7 @@ msgstr ""
 "PWM frequentie is niet schrijfbaar wanneer de variable_frequency False is "
 "tijdens constructie."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1418,6 +1483,12 @@ msgstr "En iedere module in het bestandssysteem\n"
 msgid "Polygon needs at least 3 points"
 msgstr "Polygon heeft op zijn minst 3 punten nodig"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1449,12 +1520,13 @@ msgstr "RNG DeInit Fout"
 msgid "RNG Init Error"
 msgstr "RNG Init Fout"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr "RS485 inversie gespecificeerd terwijl niet in RS485 modus"
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "RTC calibratie niet ondersteund door dit board"
 
@@ -1508,7 +1580,7 @@ msgstr "Veilige modus wordt uitgevoerd! "
 msgid "SD card CSD format not supported"
 msgstr "SD kaart CSD formaat niet ondersteund"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA of SCL hebben een pullup nodig"
@@ -1576,6 +1648,10 @@ msgstr "Slice en waarde hebben verschillende lengtes."
 msgid "Slices not supported"
 msgstr "Slices niet ondersteund"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Bron en bestemming buffers moeten dezelfde lengte hebben"
@@ -1748,6 +1824,10 @@ msgstr "UUID waarde is geen str, int, of byte buffer"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Niet in staat buffers voor gesigneerde conversie te alloceren"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1774,6 +1854,11 @@ msgstr "Niet in staat om naar nvm te schrijven."
 msgid "Unexpected nrfx uuid type"
 msgstr "Onverwacht mrfx uuid type"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1811,7 +1896,7 @@ msgstr ""
 "apparaat geweigerd of genegeerd werd."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Niet-ondersteunde baudsnelheid"
 
@@ -2060,6 +2145,7 @@ msgid "byteorder is not a string"
 msgstr "byteorder is geen string"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "butes > 8 niet ondersteund"
 
@@ -2579,7 +2665,7 @@ msgstr "vulling (padding) is onjuist"
 msgid "index is out of bounds"
 msgstr "index is buiten bereik"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "index is buiten bereik"
 
@@ -3086,6 +3172,10 @@ msgid "polygon can only be registered in one parent"
 msgstr ""
 "polygoon kan slechts bij één object van een hoger niveau worden geregistreerd"
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop van een lege PulseIn"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3102,6 +3192,24 @@ msgstr "derde argument van pow() mag geen 0 zijn"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() met 3 argumenten vereist integers"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "wachtrij overloop"
@@ -3346,7 +3454,8 @@ msgstr "tuple index buiten bereik"
 msgid "tuple/list has wrong length"
 msgstr "tuple of lijst heeft onjuiste lengte"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx en rx kunnen niet beiden None zijn"
@@ -3627,9 +3736,6 @@ msgstr "zi moet vorm (n_section, 2) hebben"
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "object van type '%s' heeft geen len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop van een lege PulseIn"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop van een lege set"
 
diff --git a/locale/pl.po b/locale/pl.po
index df56f7fbd1..ea0c2a4017 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-09-29 01:39+0000\n"
 "Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n"
 "Language-Team: pl\n"
@@ -286,7 +286,7 @@ msgstr "Adres musi mieć %d bajtów"
 msgid "Address type out of range"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Wszystkie peryferia I2C w użyciu"
 
@@ -294,11 +294,11 @@ msgstr "Wszystkie peryferia I2C w użyciu"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Wszystkie peryferia SPI w użyciu"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Wszystkie peryferia UART w użyciu"
 
@@ -320,6 +320,9 @@ msgstr "Wszystkie timery tej nóżki w użyciu"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -339,6 +342,10 @@ msgstr ""
 msgid "Already running"
 msgstr ""
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "AnalogIn nie jest obsługiwany na danym pinie"
@@ -558,6 +565,7 @@ msgstr "Nie można zrestartować -- nie ma bootloadera."
 msgid "Cannot set value when direction is input."
 msgstr "Nie można ustawić wartości w trybie wejścia."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "Nie można określić RTS ani CTS w trybie RS485"
@@ -652,14 +660,15 @@ msgid "Could not initialize SDCard"
 msgstr "Nie można zainicjować SDCard"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Ustawienie UART nie powiodło się"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Nie można zainicjować kanału"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Nie można zainicjować timera"
 
@@ -675,6 +684,10 @@ msgstr "Nie można ponownie zainicjować timera"
 msgid "Could not restart PWM"
 msgstr "Nie można ponownie uruchomić PWM"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Nie można ustawić adresu"
@@ -765,6 +778,10 @@ msgstr "Tryb sterowania nieużywany w trybie wejścia."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "ECB działa tylko na 16 bajtach naraz"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -822,6 +839,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Nie udało się wysłać polecenia."
@@ -838,12 +859,21 @@ msgstr "Nie udała się alokacja bufora RX"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Nie udała się alokacja %d bajtów na bufor RX"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Nie udało się połączyć: błąd wewnętrzny"
@@ -852,6 +882,10 @@ msgstr "Nie udało się połączyć: błąd wewnętrzny"
 msgid "Failed to connect: timeout"
 msgstr "Nie udało się połączyć: upłynął limit czasu"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Nie można przeanalizować pliku MP3"
@@ -947,7 +981,7 @@ msgstr "Niewłaściwa wielkość bufora"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Błąd I/O"
 
@@ -1040,6 +1074,10 @@ msgstr "Zły plik"
 msgid "Invalid format chunk size"
 msgstr "Zła wielkość fragmentu formatu"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Podano nieprawidłową częstotliwość"
@@ -1077,6 +1115,8 @@ msgstr "Zła nóżka dla prawego kanału"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1209,21 +1249,25 @@ msgstr "Brak DAC"
 msgid "No DMA channel found"
 msgstr "Nie znaleziono kanału DMA"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Brak pinu MISO"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Brak pinu MOSI"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Brak nóżki RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1266,6 +1310,14 @@ msgstr "Nie określono klucza"
 msgid "No long integer support"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr ""
@@ -1329,6 +1381,14 @@ msgstr "Nieparzysta parzystość nie jest wspierana"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Tylko 8 lub 16 bitów mono z "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1346,6 +1406,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Nadpróbkowanie musi być wielokrotnością 8."
@@ -1360,6 +1424,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1405,6 +1470,12 @@ msgstr "Oraz moduły w systemie plików\n"
 msgid "Polygon needs at least 3 points"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1434,12 +1505,13 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "Brak obsługi kalibracji RTC"
 
@@ -1493,7 +1565,7 @@ msgstr ""
 msgid "SD card CSD format not supported"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA lub SCL wymagają podciągnięcia"
@@ -1561,6 +1633,10 @@ msgstr "Fragment i wartość są różnych długości."
 msgid "Slices not supported"
 msgstr "Fragmenty nieobsługiwane"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Bufory źródłowy i docelowy muszą mieć taką samą długość"
@@ -1723,6 +1799,10 @@ msgstr "UUID nie jest typu str, int lub bytes"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Nie udała się alokacja buforów do konwersji ze znakiem"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1749,6 +1829,11 @@ msgstr "Błąd zapisu do NVM."
 msgid "Unexpected nrfx uuid type"
 msgstr "Nieoczekiwany typ nrfx uuid"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1784,7 +1869,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Zła szybkość transmisji"
 
@@ -2030,6 +2115,7 @@ msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "bajty większe od 8 bitów są niewspierane"
 
@@ -2545,7 +2631,7 @@ msgstr "złe wypełnienie"
 msgid "index is out of bounds"
 msgstr "indeks jest poza zakresem"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "indeks poza zakresem"
 
@@ -3049,6 +3135,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr ""
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop z pustego PulseIn"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3065,6 +3155,24 @@ msgstr "trzeci argument pow() nie może być 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "przepełnienie kolejki"
@@ -3308,7 +3416,8 @@ msgstr "indeks krotki poza zakresem"
 msgid "tuple/list has wrong length"
 msgstr "krotka/lista ma złą długość"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx i rx nie mogą być oba None"
@@ -3564,9 +3673,6 @@ msgstr ""
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "obiekt typu '%s' nie ma len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop z pustego PulseIn"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop z pustego zbioru"
 
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 6a32208780..a565db0985 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-09-22 21:30+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
@@ -288,7 +288,7 @@ msgstr "O endereço deve ter %d bytes de comprimento"
 msgid "Address type out of range"
 msgstr "O tipo do endereço está fora do alcance"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Todos os periféricos I2C estão em uso"
 
@@ -296,11 +296,11 @@ msgstr "Todos os periféricos I2C estão em uso"
 msgid "All RX FIFOs in use"
 msgstr "Todos os FIFOs RX estão em uso"
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Todos os periféricos SPI estão em uso"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Todos os periféricos UART estão em uso"
 
@@ -322,6 +322,9 @@ msgstr "Todos os temporizadores para este pino estão em uso"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -341,6 +344,10 @@ msgstr "Já há um ouvinte com todas as correspondências"
 msgid "Already running"
 msgstr "Já está em execução"
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "O AnalogIn não é compatível no pino informado"
@@ -567,6 +574,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr "Não é possível definir o valor quando a direção é inserida."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "Não é possível definir o RTS ou CTS no modo RS485"
@@ -661,14 +669,15 @@ msgid "Could not initialize SDCard"
 msgstr "Não foi possível inicializar o SDCard"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Não foi possível inicializar o canal"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Não foi possível inicializar o temporizador"
 
@@ -684,6 +693,10 @@ msgstr "Não foi possível reiniciar o temporizador"
 msgid "Could not restart PWM"
 msgstr "Não foi possível reiniciar o PWM"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Não foi possível definir o endereço"
@@ -774,6 +787,10 @@ msgstr "O modo do controlador não é usado quando a direção for inserida."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "O BCE opera apenas com 16 bytes por vez"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -831,6 +848,10 @@ msgstr "Anúncios estendidos não compatíveis com a resposta da varredura."
 msgid "FFT is defined for ndarrays only"
 msgstr "O FFT é definido apenas para ndarrays"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Falha ao enviar comando."
@@ -847,12 +868,21 @@ msgstr "Falha ao alocar buffer RX"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Falha ao alocar buffer RX de %d bytes"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Falha ao conectar: erro interno"
@@ -861,6 +891,10 @@ msgstr "Falha ao conectar: erro interno"
 msgid "Failed to connect: timeout"
 msgstr "Falha ao conectar: tempo limite"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Falha ao analisar o arquivo MP3"
@@ -958,7 +992,7 @@ msgstr "O tamanho do buffer está incorreto"
 msgid "Input taking too long"
 msgstr "A entrada está demorando demais"
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Erro de entrada/saída"
 
@@ -1051,6 +1085,10 @@ msgstr "Arquivo inválido"
 msgid "Invalid format chunk size"
 msgstr "Tamanho do pedaço de formato inválido"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "A frequência informada é inválida"
@@ -1088,6 +1126,8 @@ msgstr "Pino inválido para canal direito"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1219,21 +1259,25 @@ msgstr "Nenhum DAC no chip"
 msgid "No DMA channel found"
 msgstr "Nenhum canal DMA encontrado"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Nenhum pino MISO"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Nenhum pino MOSI"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Nenhum pino RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1276,6 +1320,14 @@ msgstr "Nenhuma chave foi definida"
 msgid "No long integer support"
 msgstr "Não há compatibilidade com inteiro longo"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "Não há mais temporizadores disponíveis neste pino."
@@ -1340,6 +1392,14 @@ msgstr "A paridade ímpar não é compatível"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Apenas mono com 8 ou 16 bits com "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1361,6 +1421,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr "Apenas o int bruto é compatível para o ip"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "A superamostragem deve ser um múltiplo de 8."
@@ -1379,6 +1443,7 @@ msgstr ""
 "A frequência do PWM não pode ser gravada quando variable_frequency for False "
 "na construção."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1427,6 +1492,12 @@ msgstr "Além de quaisquer módulos no sistema de arquivos\n"
 msgid "Polygon needs at least 3 points"
 msgstr "O Polígono precisa de pelo menos 3 pontos"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1461,12 +1532,13 @@ msgstr "Erro DeInit RNG"
 msgid "RNG Init Error"
 msgstr "Houve um erro na inicialização do RNG"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr "A definição da inversão do RS485 quando não está no modo RS485"
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "A calibração RTC não é suportada nesta placa"
 
@@ -1520,7 +1592,7 @@ msgstr "Executando no modo de segurança! "
 msgid "SD card CSD format not supported"
 msgstr "O formato CSD do Cartão SD não é compatível"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL precisa de um pull up"
@@ -1588,6 +1660,10 @@ msgstr "Fatie e avalie os diferentes comprimentos."
 msgid "Slices not supported"
 msgstr "Fatiamento não compatível"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Os buffers da origem e do destino devem ter o mesmo comprimento"
@@ -1764,6 +1840,10 @@ msgstr "O valor UUID não é um buffer str, int ou byte"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Não é possível alocar buffers para conversão assinada"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1790,6 +1870,11 @@ msgstr "Não é possível gravar no nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr "Tipo uuid nrfx inesperado"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr "Falha desconhecida"
@@ -1827,7 +1912,7 @@ msgstr ""
 "dispositivo tenha sido recusado ou ignorado."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Taxa de transmissão não suportada"
 
@@ -2077,6 +2162,7 @@ msgid "byteorder is not a string"
 msgstr "a ordem dos bytes não é uma cadeia de caracteres"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits não suportado"
 
@@ -2601,7 +2687,7 @@ msgstr "preenchimento incorreto"
 msgid "index is out of bounds"
 msgstr "o índice está fora dos limites"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "Índice fora do intervalo"
 
@@ -3114,6 +3200,10 @@ msgstr "o pixel_shader deve ser displayio.Palette ou displayio.ColorConverter"
 msgid "polygon can only be registered in one parent"
 msgstr "o polígono só pode ser registrado em um pai"
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop a partir de um PulseIn vazio"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3130,6 +3220,24 @@ msgstr "O terceiro argumento pow() não pode ser 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "o pow() com 3 argumentos requer números inteiros"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "estouro de fila"
@@ -3374,7 +3482,8 @@ msgstr "o índice da tupla está fora do intervalo"
 msgid "tuple/list has wrong length"
 msgstr "a tupla/lista está com tamanho incorreto"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "TX e RX não podem ser ambos"
@@ -3666,9 +3775,6 @@ msgstr "zi deve estar na forma (n_section, 2)"
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "O objeto do tipo '%s' não possui len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop a partir de um PulseIn vazio"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop a partir de um conjunto vazio"
 
diff --git a/locale/sv.po b/locale/sv.po
index c181e975c8..cb69ecef1d 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2020-09-07 19:36+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -284,7 +284,7 @@ msgstr "Adressen måste vara %d byte lång"
 msgid "Address type out of range"
 msgstr "Adresstyp utanför intervallet"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "All I2C-kringutrustning används"
 
@@ -292,11 +292,11 @@ msgstr "All I2C-kringutrustning används"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "All SPI-kringutrustning används"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Alla UART-kringutrustning används"
 
@@ -318,6 +318,9 @@ msgstr "Alla timers för denna pinne är i bruk"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -337,6 +340,10 @@ msgstr ""
 msgid "Already running"
 msgstr "Kör redan"
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "AnalogIn stöds inte på angiven pinne"
@@ -558,6 +565,7 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr "Kan inte sätta värde när riktning är input."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "Det går inte att specificera RTS eller CTS i RS485-läget"
@@ -652,14 +660,15 @@ msgid "Could not initialize SDCard"
 msgstr "Kan inte initiera SD-kort"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Det gick inte att initiera UART"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Det gick inte att initiera kanalen"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Det gick inte att initialisera timern"
 
@@ -675,6 +684,10 @@ msgstr "Det gick inte att återinitiera timern"
 msgid "Could not restart PWM"
 msgstr "Det gick inte att starta om PWM"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Kan inte ange adress"
@@ -765,6 +778,10 @@ msgstr "Drivläge används inte när riktning är input."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "ECB arbetar endast på 16 byte åt gången"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -822,6 +839,10 @@ msgstr "Utökad annonsering i kombination med skanningssvar stöds inte."
 msgid "FFT is defined for ndarrays only"
 msgstr "FFT är enbart definierade för ndarrays"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Det gick inte att skicka kommandot."
@@ -838,12 +859,21 @@ msgstr "Det gick inte att tilldela RX-buffert"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Det gick inte att allokera RX-bufferten på %d byte"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Det gick inte att ansluta: internt fel"
@@ -852,6 +882,10 @@ msgstr "Det gick inte att ansluta: internt fel"
 msgid "Failed to connect: timeout"
 msgstr "Det gick inte att ansluta: timeout"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Det gick inte att tolka MP3-filen"
@@ -947,7 +981,7 @@ msgstr "Fel buffertstorlek"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Indata-/utdatafel"
 
@@ -1040,6 +1074,10 @@ msgstr "Felaktig fil"
 msgid "Invalid format chunk size"
 msgstr "Ogiltig formatsegmentstorlek"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Ogiltig frekvens angiven"
@@ -1077,6 +1115,8 @@ msgstr "Ogiltig pinne för höger kanal"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1209,21 +1249,25 @@ msgstr "Ingen DAC på chipet"
 msgid "No DMA channel found"
 msgstr "Ingen DMA-kanal hittades"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Ingen MISO-pinne"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Ingen MOSI-pinne"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Ingen RX-pinne"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1266,6 +1310,14 @@ msgstr "Ingen nyckel angavs"
 msgid "No long integer support"
 msgstr "Inget stöd för långt heltal"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "Inga fler timers tillgängliga på denna pinne."
@@ -1331,6 +1383,14 @@ msgstr "Udda paritet stöds inte"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Endast 8 eller 16 bitars mono med "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1351,6 +1411,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Översampling måste vara multipel av 8."
@@ -1367,6 +1431,7 @@ msgstr ""
 "PWM-frekvensen är inte skrivbar när variable_frequency är falsk vid "
 "skapandet."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1415,6 +1480,12 @@ msgstr "Plus eventuella moduler i filsystemet\n"
 msgid "Polygon needs at least 3 points"
 msgstr "Polygonen behöver minst 3 punkter"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1447,12 +1518,13 @@ msgstr "RNG DeInit-fel"
 msgid "RNG Init Error"
 msgstr "RNG Init-fel"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr "RS485-inversion specificerad när den inte är i RS485-läge"
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "RTC-kalibrering stöds inte av detta kort"
 
@@ -1506,7 +1578,7 @@ msgstr "Kör i säkert läge! "
 msgid "SD card CSD format not supported"
 msgstr "SD-kort CSD-format stöds inte"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA eller SCL behöver en pullup"
@@ -1574,6 +1646,10 @@ msgstr "Slice och värde har olika längd."
 msgid "Slices not supported"
 msgstr "Slice stöds inte"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Käll- och målbuffertar måste ha samma längd"
@@ -1746,6 +1822,10 @@ msgstr "UUID-värdet är inte str, int eller byte-buffert"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Det går inte att allokera buffert för signerad konvertering"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1772,6 +1852,11 @@ msgstr "Det gick inte att skriva till nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr "Oväntad nrfx uuid-typ"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1809,7 +1894,7 @@ msgstr ""
 "eller ignorerades."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate stöd inte"
 
@@ -2055,6 +2140,7 @@ msgid "byteorder is not a string"
 msgstr "byteorder är inte en sträng"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "bytes> 8 bitar stöds inte"
 
@@ -2574,7 +2660,7 @@ msgstr "felaktig utfyllnad"
 msgid "index is out of bounds"
 msgstr "index är utanför gränserna"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "index utanför intervallet"
 
@@ -3081,6 +3167,10 @@ msgstr ""
 msgid "polygon can only be registered in one parent"
 msgstr "polygon kan endast registreras i en förälder"
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "pop från en tom PulseIn"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3097,6 +3187,24 @@ msgstr "pow() 3: e argument kan inte vara 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() med 3 argument kräver heltal"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "köstorlek överskreds"
@@ -3341,7 +3449,8 @@ msgstr "tupelindex utanför intervallet"
 msgid "tuple/list has wrong length"
 msgstr "tupel/lista har fel längd"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx och rx kan inte båda vara None"
@@ -3624,9 +3733,6 @@ msgstr "zi måste vara i formen (n_section, 2)"
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "objekt av typen '%s' har ingen len()"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "pop från en tom PulseIn"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "pop från en tom uppsättning"
 
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index 2b146478c1..a9c8c422ea 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-09-24 16:55-0500\n"
+"POT-Creation-Date: 2020-09-29 11:11+0530\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -285,7 +285,7 @@ msgstr "Dìzhǐ bìxū shì %d zì jié zhǎng"
 msgid "Address type out of range"
 msgstr "Dìzhǐ lèixíng chāochū fànwéi"
 
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng"
 
@@ -293,11 +293,11 @@ msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng"
 msgid "All RX FIFOs in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
 msgid "All SPI peripherals are in use"
 msgstr "Suǒyǒu SPI wàiwéi qì zhèngzài shǐyòng"
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr "Suǒyǒu UART wàiwéi zhèngzài shǐyòng"
 
@@ -319,6 +319,9 @@ msgstr "Cǐ yǐn jiǎo de suǒyǒu jìshí qì zhèngzài shǐyòng"
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
 #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
@@ -338,6 +341,10 @@ msgstr ""
 msgid "Already running"
 msgstr "yǐ zài yùn xíng"
 
+#: ports/esp32s2/common-hal/wifi/Radio.c
+msgid "Already scanning for wifi networks"
+msgstr ""
+
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
 msgstr "Gěi dìng de yǐn jiǎo bù zhīchí AnalogIn"
@@ -557,6 +564,7 @@ msgstr "Wúfǎ chóng zhì wèi bootloader, yīnwèi méiyǒu bootloader cúnzà
 msgid "Cannot set value when direction is input."
 msgstr "Dāng fāngxiàng xiàng nèi shí, bùnéng shèzhì gāi zhí."
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
 msgstr "wú fǎ zài RS485 mó shì xià zhǐ dìng RTS huò CTS"
@@ -649,14 +657,15 @@ msgid "Could not initialize SDCard"
 msgstr "wú fǎ chū shǐ huà SDCard"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Wúfǎ chūshǐhuà UART"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize channel"
 msgstr "Wúfǎ chūshǐhuà píndào"
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not initialize timer"
 msgstr "Wúfǎ chūshǐhuà jìshí qì"
 
@@ -672,6 +681,10 @@ msgstr "Wúfǎ chóngxīn qǐdòng jìshí qì"
 msgid "Could not restart PWM"
 msgstr "Wúfǎ chóngqǐ PWM"
 
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c
+msgid "Could not retrieve clock"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "wú fǎ shè zhì dì zhǐ"
@@ -762,6 +775,10 @@ msgstr "Fāngxiàng shūrù shí qūdòng móshì méiyǒu shǐyòng."
 msgid "ECB only operates on 16 bytes at a time"
 msgstr "ECB yí cì zhǐ shǐ yòng 16 gè zì jié"
 
+#: ports/esp32s2/common-hal/busio/SPI.c
+msgid "ESP-IDF memory allocation failed"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -819,6 +836,10 @@ msgstr "Bù zhīchí dài yǒu sǎomiáo xiǎngyìng de kuòzhǎn guǎngbò."
 msgid "FFT is defined for ndarrays only"
 msgstr "FFT jǐn wéi ndarrays dìng yì"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+msgid "Failed SSL handshake"
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Fāsòng mìnglìng shībài."
@@ -835,12 +856,21 @@ msgstr "Fēnpèi RX huǎnchōng shībài"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #: ports/stm/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Fēnpèi RX huǎnchōng qū%d zì jié shībài"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to allocate Wifi memory"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
+msgid "Failed to allocate wifi scan memory"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr "Liánjiē shībài: Nèibù cuòwù"
@@ -849,6 +879,10 @@ msgstr "Liánjiē shībài: Nèibù cuòwù"
 msgid "Failed to connect: timeout"
 msgstr "Liánjiē shībài: Chāoshí"
 
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Failed to init wifi"
+msgstr ""
+
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr "Wúfǎ jiěxī MP3 wénjiàn"
@@ -944,7 +978,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè"
 msgid "Input taking too long"
 msgstr ""
 
-#: py/moduerrno.c
+#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
 msgid "Input/output error"
 msgstr "Shūrù/shūchū cuòwù"
 
@@ -1037,6 +1071,10 @@ msgstr "Wúxiào de wénjiàn"
 msgid "Invalid format chunk size"
 msgstr "Géshì kuài dàxiǎo wúxiào"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "Invalid frequency"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Invalid frequency supplied"
 msgstr "Tígōng de pínlǜ wúxiào"
@@ -1074,6 +1112,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào"
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
 #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
@@ -1205,21 +1245,25 @@ msgstr "Méiyǒu DAC zài xīnpiàn shàng de"
 msgid "No DMA channel found"
 msgstr "Wèi zhǎodào DMA píndào"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
 msgstr "Méiyǒu MISO yǐn jiǎo"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "No MOSI Pin"
 msgstr "Méiyǒu MOSI yǐn jiǎo"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Wèi zhǎodào RX yǐn jiǎo"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
@@ -1262,6 +1306,14 @@ msgstr "Wèi zhǐdìng mì yào"
 msgid "No long integer support"
 msgstr "Méiyǒu zhǎng zhěngshù zhīchí"
 
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more channels available"
+msgstr ""
+
+#: ports/esp32s2/common-hal/pwmio/PWMOut.c
+msgid "No more timers available"
+msgstr ""
+
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "No more timers available on this pin."
 msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì."
@@ -1326,6 +1378,14 @@ msgstr "Bù zhīchí jīshù"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi "
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 SOCK_STREAM sockets supported"
+msgstr ""
+
+#: ports/esp32s2/common-hal/wifi/__init__.c
+msgid "Only IPv4 addresses supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1347,6 +1407,10 @@ msgstr ""
 msgid "Only raw int supported for ip"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Out of sockets"
+msgstr ""
+
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Guò cǎiyàng bìxū shì 8 de bèishù."
@@ -1362,6 +1426,7 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě."
 
+#: ports/esp32s2/common-hal/displayio/ParallelBus.c
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
@@ -1410,6 +1475,12 @@ msgstr "Zài wénjiàn xìtǒng shàng tiānjiā rènhé mókuài\n"
 msgid "Polygon needs at least 3 points"
 msgstr "Duōbiānxíng zhìshǎo xūyào 3 diǎn"
 
+#: ports/esp32s2/common-hal/pulseio/PulseOut.c
+msgid ""
+"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
+"instead"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c
@@ -1439,12 +1510,13 @@ msgstr "RNG qǔxiāo chūshǐhuà cuòwù"
 msgid "RNG Init Error"
 msgstr "RNG chūshǐhuà cuòwù"
 
+#: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr "Wèi chǔyú RS485 móshì shí zhǐdìngle RS485 fǎn zhuǎn"
 
-#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
-#: ports/nrf/common-hal/rtc/RTC.c
+#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
+#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr "Cǐ bǎn bù zhīchí RTC jiàozhǔn"
 
@@ -1498,7 +1570,7 @@ msgstr "Zài ānquán móshì xià yùnxíng!"
 msgid "SD card CSD format not supported"
 msgstr "Bù zhīchí SD kǎ CSD géshì"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA huò SCL xūyào lādòng"
@@ -1566,6 +1638,10 @@ msgstr "Qiēpiàn hé zhí bùtóng chángdù."
 msgid "Slices not supported"
 msgstr "Qiēpiàn bù shòu zhīchí"
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "SocketPool can only be used with wifi.radio"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "Source and destination buffers must be the same length"
 msgstr "Yuán huǎnchōng qū hé mùbiāo huǎnchōng qū de chángdù bìxū xiāngtóng"
@@ -1737,6 +1813,10 @@ msgstr "UUID zhí bùshì str,int huò zì jié huǎnchōng qū"
 msgid "Unable to allocate buffers for signed conversion"
 msgstr "Wúfǎ fēnpèi huǎnchōng qū yòng yú qiānmíng zhuǎnhuàn"
 
+#: ports/esp32s2/common-hal/busio/I2C.c
+msgid "Unable to create lock"
+msgstr ""
+
 #: shared-module/displayio/I2CDisplay.c
 #, c-format
 msgid "Unable to find I2C Display at %x"
@@ -1763,6 +1843,11 @@ msgstr "Wúfǎ xiě rù nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr "Yìwài de nrfx uuid lèixíng"
 
+#: ports/esp32s2/common-hal/socketpool/Socket.c
+#, c-format
+msgid "Unhandled ESP TLS error %d %d %x %d"
+msgstr ""
+
 #: shared-bindings/wifi/Radio.c
 msgid "Unknown failure"
 msgstr ""
@@ -1800,7 +1885,7 @@ msgstr ""
 "huò hūlüè."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Bù zhīchí de baudrate"
 
@@ -2046,6 +2131,7 @@ msgid "byteorder is not a string"
 msgstr "byteorder bùshì zìfú chuàn"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
 msgstr "zì jié > 8 wèi"
 
@@ -2564,7 +2650,7 @@ msgstr "bù zhèngquè de tiánchōng"
 msgid "index is out of bounds"
 msgstr "suǒyǐn chāochū fànwéi"
 
-#: py/obj.c
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr "suǒyǐn chāochū fànwéi"
 
@@ -3069,6 +3155,10 @@ msgstr "pixel_shader bìxū shì displayio.Palette huò displayio.ColorConverter
 msgid "polygon can only be registered in one parent"
 msgstr "duōbiānxíng zhī néng zài yīgè fù jí zhōng zhùcè"
 
+#: ports/esp32s2/common-hal/pulseio/PulseIn.c
+msgid "pop from an empty PulseIn"
+msgstr "cóng kōng de PulseIn dànchū dànchū"
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
@@ -3085,6 +3175,24 @@ msgstr "pow() 3 cān shǔ bùnéng wéi 0"
 msgid "pow() with 3 arguments requires integers"
 msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 
+#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
+#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
+#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
+#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
+#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
+msgid "pressing boot button at start up.\n"
+msgstr ""
+
+#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
+#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
+#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
+#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
+msgid "pressing both buttons at start up.\n"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "duìliè yìchū"
@@ -3329,7 +3437,8 @@ msgstr "yuán zǔ suǒyǐn chāochū fànwéi"
 msgid "tuple/list has wrong length"
 msgstr "yuán zǔ/lièbiǎo chángdù cuòwù"
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
 msgid "tx and rx cannot both be None"
 msgstr "tx hé rx bùnéng dōu shì wú"
@@ -3606,9 +3715,6 @@ msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 #~ msgid "object of type '%s' has no len()"
 #~ msgstr "lèixíng '%s' de duìxiàng méiyǒu chángdù"
 
-#~ msgid "pop from an empty PulseIn"
-#~ msgstr "cóng kōng de PulseIn dànchū dànchū"
-
 #~ msgid "pop from an empty set"
 #~ msgstr "cóng kōng jí dànchū"