Merge branch 'main' of github.com:felixerdy/circuitpython

locale/es.po

@@ -8,15 +8,15 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-03-07 15:50+0000\n"
-"Last-Translator: Jose David M <jquintana202020@gmail.com>\n"
+"PO-Revision-Date: 2021-03-12 02:03+0000\n"
+"Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
 "Language-Team: \n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.5.1\n"
+"X-Generator: Weblate 4.5.2-dev\n"
 
 #: main.c
 msgid ""
@@ -1836,7 +1836,7 @@ msgstr ""
 
 #: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Pins must be sequential"
-msgstr ""
+msgstr "Los pines deben estar en orden secuencial"
 
 #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
 msgid "Pins must share PWM slice"
@@ -2142,11 +2142,10 @@ msgid ""
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"La alimentación del microntrolador cayó. Asegúrate que tu fuente de "
+"La alimentación del microntrolador bajó. Asegúrate que tu fuente de "
 "alimentación\n"
-"pueda aportar suficiente energía para todo el circuito y presiona reset "
-"(luego de\n"
-"expulsar CIRCUITPY)\n"
+"pueda aportar suficiente energía para todo el circuito y presiona reset ("
+"luego de expulsar CIRCUITPY)\n"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -2818,7 +2817,7 @@ msgstr "circulo solo puede ser registrado con un pariente"
 
 #: shared-bindings/bitmaptools/__init__.c
 msgid "clip point must be (x,y) tuple"
-msgstr "El punto clip debe ser una tupla (x, y)"
+msgstr "El punto de recorte debe ser una tupla (x, y)"
 
 #: shared-bindings/msgpack/ExtType.c
 msgid "code outside range 0~127"
@@ -3842,7 +3841,7 @@ msgstr "presionando ambos botones al inicio.\n"
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "pull masks conflict with direction masks"
-msgstr ""
+msgstr "máscara de pull en conflicto con máscara de dirección"
 
 #: ports/raspberrypi/bindings/rp2pio/StateMachine.c
 msgid "pull_threshold must be between 1 and 32"

ports/esp32s2/common-hal/busio/I2C.c

@@ -53,7 +53,6 @@ void i2c_reset(void) {
         }
     }
 }
-static bool i2c_inited[I2C_NUM_MAX];
 
 void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
         const mcu_pin_obj_t* scl, const mcu_pin_obj_t* sda, uint32_t frequency, uint32_t timeout) {
@@ -90,10 +89,9 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
 #endif
 
 
-    if (xSemaphoreCreateBinaryStatic(&self->semaphore) != &self->semaphore) {
+    if (xSemaphoreCreateMutexStatic(&self->semaphore) != &self->semaphore) {
         mp_raise_RuntimeError(translate("Unable to create lock"));
     }
-    xSemaphoreGive(&self->semaphore);
     self->sda_pin = sda;
     self->scl_pin = scl;
     self->i2c_num = I2C_NUM_MAX;
@@ -106,6 +104,10 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
         mp_raise_ValueError(translate("All I2C peripherals are in use"));
     }
     i2c_status[self->i2c_num] = STATUS_IN_USE;
+
+    // Delete any previous driver.
+    i2c_driver_delete(self->i2c_num);
+
     i2c_config_t i2c_conf = {
         .mode = I2C_MODE_MASTER,
         .sda_io_num = self->sda_pin->number,
@@ -117,24 +119,17 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
             .clk_speed = frequency,
         }
     };
-    esp_err_t result = i2c_param_config(self->i2c_num, &i2c_conf);
-    if (result != ESP_OK) {
-        mp_raise_ValueError(translate("Invalid pins"));
+    if (i2c_param_config(self->i2c_num, &i2c_conf) != ESP_OK) {
+        mp_raise_ValueError(translate("Invalid frequency"));
     }
 
-
-    if (!i2c_inited[self->i2c_num]) {
-        result = i2c_driver_install(self->i2c_num,
+    if (i2c_driver_install(self->i2c_num,
                            I2C_MODE_MASTER,
                            0,
                            0,
-                                    0);
-        if (result != ESP_OK) {
+                           0) != ESP_OK) {
         mp_raise_OSError(MP_EIO);
     }
-        i2c_inited[self->i2c_num] = true;
-
-    }
 
     claim_pin(sda);
     claim_pin(scl);
@@ -149,12 +144,14 @@ void common_hal_busio_i2c_deinit(busio_i2c_obj_t *self) {
         return;
     }
 
-    i2c_status[self->i2c_num] = STATUS_FREE;
+    i2c_driver_delete(self->i2c_num);
 
     common_hal_reset_pin(self->sda_pin);
     common_hal_reset_pin(self->scl_pin);
     self->sda_pin = NULL;
     self->scl_pin = NULL;
+
+    i2c_status[self->i2c_num] = STATUS_FREE;
 }
 
 bool common_hal_busio_i2c_probe(busio_i2c_obj_t *self, uint8_t addr) {

ports/esp32s2/common-hal/wifi/__init__.c

@@ -109,6 +109,7 @@ void common_hal_wifi_init(void) {
 
     wifi_radio_obj_t* self = &common_hal_wifi_radio_obj;
     self->netif = esp_netif_create_default_wifi_sta();
+    self->started = false;
 
     // Even though we just called esp_netif_create_default_wifi_sta,
     //   station mode isn't actually ready for use until esp_wifi_set_mode()

ports/esp32s2/esp-idf

@@ -1 +1 @@
-Subproject commit ebe7784258d8c10e9cc334ccc00c3fd270746c8b
+Subproject commit f30a865fd1a44d880b909b84112f74741412c2ce