Merge pull request #8656 from henriclinden/stable
Added support for the PCTEL WSC-1450 board
This commit is contained in:
Scott Shawcroft
GitHub
commit
1f6e73b053
51
ports/nrf/boards/pctel_wsc_1450/README.md
Normal file
51
ports/nrf/boards/pctel_wsc_1450/README.md
Normal file
@ -0,0 +1,51 @@
|
|||||||
|
# PCTEL WSC-1450
|
||||||
|
|
||||||
|
The PCTEL Wireless Sensor Core (WSC) is a versatile Industrial IoT product line
|
||||||
|
that offers multiple radio connectivity options including cellular, LoRa,
|
||||||
|
Bluetooth 5, NFC as well as 802.15.4 support.
|
||||||
|
|
||||||
|
In addition to several radios, the PCTEL WSC includes several sensors to
|
||||||
|
monitor a variety of physical conditions. These sensors can detect gas, air
|
||||||
|
quality, temperature, relative humidity, acceleration, angular rate of change,
|
||||||
|
magnetic field, range, and sound. For solution optimization, the PCTEL WSC can
|
||||||
|
be ordered with a subset of radios and sensors.
|
||||||
|
|
||||||
|
For more details about this board, and its variants, navigate to
|
||||||
|
https://pctel.com
|
||||||
|
|
||||||
|
# Build instructions
|
||||||
|
|
||||||
|
Configure your build environment according to the Adafruit instructions. To
|
||||||
|
build circuitpython for WSC-1450 do:
|
||||||
|
|
||||||
|
cd ports/nrf make BOARD=pctel_wsc_1450
|
||||||
|
|
||||||
|
This will create a number of firmware files in the `build-pctel_wsc_1450`
|
||||||
|
directory.
|
||||||
|
|
||||||
|
|
||||||
|
# Installing
|
||||||
|
|
||||||
|
The WSC-1450 do not feature an Adafruit-provided bootloader (supporting
|
||||||
|
niceties like UF2 flashing). Instead, WSC-1450 uses DAPLink. DAPLink handles
|
||||||
|
everything from debugging to programming the device, as well as the boot
|
||||||
|
sequence.
|
||||||
|
|
||||||
|
1. Connect the WSC-1450 dev kit using a USB cable to the `DHD USB` port. This
|
||||||
|
will power up the board and open a file browser showing the contents of the
|
||||||
|
target. (DAPlink magic)
|
||||||
|
2. Copy the newly built firmware to the WSC-1450 target using drag-n-drop or
|
||||||
|
other method. The file to upload is
|
||||||
|
`circuitpython/ports/nrf/build-pctel_wsc_1450/firmware.combined.hex`
|
||||||
|
3. Wait for the file to upload.
|
||||||
|
4. Install is complete. Reset the board.
|
||||||
|
|
||||||
|
# Running
|
||||||
|
|
||||||
|
Connect an additional USB cable to the `Target USB` port on the development
|
||||||
|
board and open a terminal like `screen` on Mac or `TeraTerm` on Windows. Serial
|
||||||
|
settings are 115200,n,8,1.
|
||||||
|
|
||||||
|
Don't forget to install/update the supporting python libraries.
|
||||||
|
|
||||||
|
Happy hacking.
|
||||||
29
ports/nrf/boards/pctel_wsc_1450/board.c
Normal file
29
ports/nrf/boards/pctel_wsc_1450/board.c
Normal file
@ -0,0 +1,29 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "supervisor/board.h"
|
||||||
|
|
||||||
|
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|
||||||
64
ports/nrf/boards/pctel_wsc_1450/mpconfigboard.h
Normal file
64
ports/nrf/boards/pctel_wsc_1450/mpconfigboard.h
Normal file
@ -0,0 +1,64 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2016 Glenn Ruben Bakke
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "nrfx/hal/nrf_gpio.h"
|
||||||
|
|
||||||
|
#define PCTELWSC1450
|
||||||
|
|
||||||
|
#define MICROPY_HW_BOARD_NAME "WSC-1450"
|
||||||
|
#define MICROPY_HW_MCU_NAME "nRF52840"
|
||||||
|
|
||||||
|
#define MICROPY_HW_LED_STATUS (&pin_P0_05)
|
||||||
|
|
||||||
|
#define DEFAULT_I2C_BUS_SCL (&pin_P0_27)
|
||||||
|
#define DEFAULT_I2C_BUS_SDA (&pin_P0_26)
|
||||||
|
|
||||||
|
#define DEFAULT_SPI_BUS_SCK (&pin_P1_15)
|
||||||
|
#define DEFAULT_SPI_BUS_MOSI (&pin_P1_13)
|
||||||
|
#define DEFAULT_SPI_BUS_MISO (&pin_P1_14)
|
||||||
|
|
||||||
|
#define DEFAULT_UART_BUS_RX (&pin_P0_16)
|
||||||
|
#define DEFAULT_UART_BUS_TX (&pin_P0_13)
|
||||||
|
|
||||||
|
// Flash operation mode is determined by MICROPY_QSPI_DATAn pin configuration.
|
||||||
|
// A pin config is valid if it is defined and its value is not 0xFF.
|
||||||
|
// Quad mode: If all DATA0 --> DATA3 are valid
|
||||||
|
// Dual mode: If DATA0 and DATA1 are valid while either DATA2 and/or DATA3 are invalid
|
||||||
|
// Single mode: If only DATA0 is valid
|
||||||
|
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 20)
|
||||||
|
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 21)
|
||||||
|
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 22)
|
||||||
|
#define MICROPY_QSPI_DATA3 NRF_GPIO_PIN_MAP(0, 23)
|
||||||
|
#define MICROPY_QSPI_SCK NRF_GPIO_PIN_MAP(0, 19)
|
||||||
|
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 17)
|
||||||
|
|
||||||
|
// #if SPI_FLASH_FILESYSTEM
|
||||||
|
// #define SPI_FLASH_MOSI_PIN &pin_P0_20
|
||||||
|
// #define SPI_FLASH_MISO_PIN &pin_P0_21
|
||||||
|
// #define SPI_FLASH_SCK_PIN &pin_P0_19
|
||||||
|
// #define SPI_FLASH_CS_PIN &pin_P0_17
|
||||||
|
// #endif
|
||||||
12
ports/nrf/boards/pctel_wsc_1450/mpconfigboard.mk
Normal file
12
ports/nrf/boards/pctel_wsc_1450/mpconfigboard.mk
Normal file
@ -0,0 +1,12 @@
|
|||||||
|
USB_VID = 0x04E9
|
||||||
|
USB_PID = 0x80FF
|
||||||
|
USB_PRODUCT = "WSC-1450"
|
||||||
|
USB_MANUFACTURER = "PCTEL"
|
||||||
|
|
||||||
|
MCU_CHIP = nrf52840
|
||||||
|
|
||||||
|
QSPI_FLASH_FILESYSTEM = 1
|
||||||
|
EXTERNAL_FLASH_DEVICE_COUNT = 1
|
||||||
|
|
||||||
|
# External flash is Winbond W25Q32JV_IQ
|
||||||
|
EXTERNAL_FLASH_DEVICES = "W25Q32JVxQ"
|
||||||
57
ports/nrf/boards/pctel_wsc_1450/pins.c
Normal file
57
ports/nrf/boards/pctel_wsc_1450/pins.c
Normal file
@ -0,0 +1,57 @@
|
|||||||
|
#include "shared-bindings/board/__init__.h"
|
||||||
|
|
||||||
|
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||||
|
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||||
|
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_32KHZ_XTAL1), MP_ROM_PTR(&pin_P0_00)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_32KHZ_XTAL2), MP_ROM_PTR(&pin_P0_01)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_P0_02)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_BOARD_ID), MP_ROM_PTR(&pin_P0_03)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_INT_LIGHT_TOF), MP_ROM_PTR(&pin_P0_04)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LED_RED), MP_ROM_PTR(&pin_P0_05)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_I2S_SCK), MP_ROM_PTR(&pin_P0_06)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_SCLK), MP_ROM_PTR(&pin_P0_07)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_I2S_WS), MP_ROM_PTR(&pin_P0_08)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_NFC1), MP_ROM_PTR(&pin_P0_09)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_NFC2), MP_ROM_PTR(&pin_P0_10)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_MOSI), MP_ROM_PTR(&pin_P0_11)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_MISO), MP_ROM_PTR(&pin_P0_12)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_DEBUG_TX), MP_ROM_PTR(&pin_P0_13)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_RTS), MP_ROM_PTR(&pin_P0_14)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_DCD), MP_ROM_PTR(&pin_P0_15)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_DEBUG_RX), MP_ROM_PTR(&pin_P0_16)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_QSPI_CSN), MP_ROM_PTR(&pin_P0_17)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_BT840_RESETN), MP_ROM_PTR(&pin_P0_18)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_QSPI_CLK), MP_ROM_PTR(&pin_P0_19)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_QSPI_IO0), MP_ROM_PTR(&pin_P0_20)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_QSPI_IO1), MP_ROM_PTR(&pin_P0_21)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_QSPI_IO2), MP_ROM_PTR(&pin_P0_22)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_QSPI_IO3), MP_ROM_PTR(&pin_P0_23)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_HW_SHUTDOWN), MP_ROM_PTR(&pin_P0_24)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_I2S_SD), MP_ROM_PTR(&pin_P0_25)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P0_26)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_27)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_POWER_ENABLE), MP_ROM_PTR(&pin_P0_28)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_PUSH_BUTTON), MP_ROM_PTR(&pin_P0_29)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_ON_OFF), MP_ROM_PTR(&pin_P0_30)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_SENSOR_POWER_ENABLE), MP_ROM_PTR(&pin_P0_31)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_BT840_SWO), MP_ROM_PTR(&pin_P1_00)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_RX), MP_ROM_PTR(&pin_P1_01)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_TX), MP_ROM_PTR(&pin_P1_02)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_DSR), MP_ROM_PTR(&pin_P1_03)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_DTR), MP_ROM_PTR(&pin_P1_04)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_INT_ACCEL), MP_ROM_PTR(&pin_P1_05)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_BOARD_ID_DISABLE), MP_ROM_PTR(&pin_P1_06)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_DIO0), MP_ROM_PTR(&pin_P1_07)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_CTS), MP_ROM_PTR(&pin_P1_08)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_SSN), MP_ROM_PTR(&pin_P1_09)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_RESETN), MP_ROM_PTR(&pin_P1_10)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_BATTERY_MONITOR_ENABLE), MP_ROM_PTR(&pin_P1_11)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_DIO1), MP_ROM_PTR(&pin_P1_12)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_DIO2), MP_ROM_PTR(&pin_P1_13)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_DIO3), MP_ROM_PTR(&pin_P1_14)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_CELL_PWRMON), MP_ROM_PTR(&pin_P1_15)},
|
||||||
|
{MP_ROM_QSTR(MP_QSTR_LORA_DIO4), MP_ROM_PTR(&pin_P1_15)},
|
||||||
|
};
|
||||||
|
|
||||||
|
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||||
Loading…
Reference in New Issue
Block a user