nrf/boards: Add Particle Xenon board configuration (an nRF52840).

ports/nrf/README.md

@@ -38,6 +38,7 @@ This is a port of MicroPython to the Nordic Semiconductor nRF series of chips.
   * [BLUEIO-TAG-EVIM BLYST Nano Sensor board](https://www.crowdsupply.com/i-syst/blyst-nano)
 * nRF52840
   * [PCA10056](http://www.nordicsemi.com/eng/Products/nRF52840-Preview-DK)
+  * [Particle Xenon](https://docs.particle.io/xenon/)
 
 ## Compile and Flash
 
@@ -126,6 +127,7 @@ ibk_blyst_nano       | s132                    | Peripheral and Central | [IDAP]
 idk_blyst_nano       | s132                    | Peripheral and Central | [IDAP](#idap-midap-link-targets)
 blueio_tag_evim      | s132                    | Peripheral and Central | [IDAP](#idap-midap-link-targets)
 pca10056             | s140                    | Peripheral and Central | [Segger](#segger-targets)
+particle_xenon       | s140                    | Peripheral and Central | [Black Magic Probe](#black-magic-probe-targets)
 
 ## IDAP-M/IDAP-Link Targets
 
@@ -153,6 +155,14 @@ Install the necessary tools to flash and debug using OpenOCD:
     sudo apt-get install openocd
     sudo pip install pyOCD
 
+## Black Magic Probe Targets
+
+This requires no further dependencies other than `arm-none-eabi-gdb`.
+
+`make deploy` will use gdb to load and run new firmware. See
+[this guide](https://github.com/blacksphere/blackmagic/wiki/Useful-GDB-commands)
+for more tips about using the BMP with GDB.
+
 ## Bluetooth LE REPL
 
 The port also implements a BLE REPL driver. This feature is disabled by default, as it will deactivate the UART REPL when activated. As some of the nRF devices only have one UART, using the BLE REPL free's the UART instance such that it can be used as a general UART peripheral not bound to REPL.

ports/nrf/boards/particle_xenon/mpconfigboard.h

@@ -0,0 +1,70 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Jim Mussared
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#define MICROPY_HW_BOARD_NAME       "XENON"
+#define MICROPY_HW_MCU_NAME         "NRF52840"
+#define MICROPY_PY_SYS_PLATFORM     "PARTICLE-XENON"
+
+#define MICROPY_PY_MACHINE_UART     (1)
+#define MICROPY_PY_MACHINE_HW_PWM   (1)
+#define MICROPY_PY_MACHINE_HW_SPI   (1)
+#define MICROPY_PY_MACHINE_TIMER    (1)
+#define MICROPY_PY_MACHINE_RTCOUNTER (1)
+#define MICROPY_PY_MACHINE_I2C      (1)
+#define MICROPY_PY_MACHINE_ADC      (1)
+#define MICROPY_PY_MACHINE_TEMP     (1)
+#define MICROPY_PY_RANDOM_HW_RNG    (1)
+
+#define MICROPY_HW_HAS_LED          (1)
+#define MICROPY_HW_LED_TRICOLOR     (1)
+#define MICROPY_HW_LED_PULLUP       (1)
+
+#define MICROPY_HW_LED_RED          (13) // LED1
+#define MICROPY_HW_LED_GREEN        (14) // LED2
+#define MICROPY_HW_LED_BLUE         (15) // LED3
+
+// UART config
+#define MICROPY_HW_UART1_RX         (8)
+#define MICROPY_HW_UART1_TX         (6)
+#define MICROPY_HW_UART1_CTS        (32+2)
+#define MICROPY_HW_UART1_RTS        (32+1)
+#define MICROPY_HW_UART1_HWFC       (0)
+
+// SPI0 config
+#define MICROPY_HW_SPI0_NAME        "SPI0"
+
+#define MICROPY_HW_SPI0_SCK         (32+15)
+#define MICROPY_HW_SPI0_MOSI        (32+13)
+#define MICROPY_HW_SPI0_MISO        (32+14)
+
+#define MICROPY_HW_PWM0_NAME        "PWM0"
+#define MICROPY_HW_PWM1_NAME        "PWM1"
+#define MICROPY_HW_PWM2_NAME        "PWM2"
+#if 0
+#define MICROPY_HW_PWM3_NAME        "PWM3"
+#endif
+
+#define HELP_TEXT_BOARD_LED         "1,2,3"

ports/nrf/boards/particle_xenon/mpconfigboard.mk

@@ -0,0 +1,7 @@
+MCU_SERIES = m4
+MCU_VARIANT = nrf52
+MCU_SUB_VARIANT = nrf52840
+SOFTDEV_VERSION = 6.1.1
+LD_FILES += boards/nrf52840_1M_256k.ld
+
+NRF_DEFINES += -DNRF52840_XXAA

ports/nrf/boards/particle_xenon/pins.csv

@@ -0,0 +1,38 @@
+LED1,P13
+LED2,P14
+LED3,P15
+A0,P3,ADC0_IN1
+A1,P4,ADC0_IN2
+A2,P28,ADC0_IN4
+A3,P29,ADC0_IN5
+A4,P30,ADC0_IN6
+A5,P31,ADC0_IN7
+SPI_SS,P31
+SPI_SCK,P47
+SPI_MOSI,P45
+SPI_MISO,P46
+SPI1_SCK,P33
+SPI1_MOSI,P34
+SPI1_MISO,P40
+UART1_RX,P8
+UART1_TX,P6
+UART2_RX,P42
+UART2_TX,P40
+SDA,P26
+SCL,P27
+SDA1,P33
+SCL1,P34
+D0,P26
+D1,P27
+D2,P33
+D3,P34
+D4,P40
+D5,P42
+D6,P43
+D7,P44
+D8,P35
+D9,P6
+D10,P8
+D11,P46
+D12,P45
+D13,P47