Merge remote-tracking branch 'adafruit/main' into design_guide_update

.gitmodules

@@ -307,3 +307,6 @@
 [submodule "frozen/circuitpython_picoed"]
 	path = frozen/circuitpython_picoed
 	url = https://github.com/elecfreaks/circuitpython_picoed.git
+[submodule "ports/espressif/esp32-camera"]
+	path = ports/espressif/esp32-camera
+	url = https://github.com/adafruit/esp32-camera/

conf.py

@@ -199,6 +199,7 @@ exclude_patterns = ["**/build*",
                     "ports/cxd56/spresense-exported-sdk",
                     "ports/espressif/certificates",
                     "ports/espressif/esp-idf",
+                    "ports/espressif/esp32-camera",
                     "ports/espressif/.idf_tools",
                     "ports/espressif/peripherals",
                     "ports/litex/hw",

docs/porting.rst

@@ -71,7 +71,7 @@ as a natural "TODO" list. An example minimal build list is shown below:
     CIRCUITPY_SDCARDIO = 0
     CIRCUITPY_FRAMEBUFFERIO = 0
     CIRCUITPY_FREQUENCYIO = 0
-    CIRCUITPY_I2CPERIPHERAL = 0
+    CIRCUITPY_I2CTARGET = 0
     # Requires SPI, PulseIO (stub ok):
     CIRCUITPY_DISPLAYIO = 0
 

frozen/circuitpython-stage

@@ -1 +1 @@
-Subproject commit f993d5fac69f3a0cfa33988268666c462b72c0ec
+Subproject commit 9a8338b3bdaeac9eeb5b74d147107c67db33fdac

locale/ID.po

@@ -404,12 +404,14 @@ msgstr "Alamat harus sepanjang %d byte"
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Semua perangkat I2C sedang digunakan"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1609,7 +1611,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2350,11 +2352,11 @@ msgstr "__new__ arg harus berupa user-type"
 msgid "a bytes-like object is required"
 msgstr "sebuah objek menyerupai byte (bytes-like) dibutuhkan"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "alamat di luar batas"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "alamatnya kosong"
 
@@ -2546,7 +2548,7 @@ msgstr "tidak dapat menetapkan ke ekspresi"
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3283,6 +3285,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr "micropython decorator tidak valid"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr ""
@@ -3538,7 +3544,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/circuitpython.pot

@@ -398,12 +398,14 @@ msgstr ""
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1589,7 +1591,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2319,11 +2321,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2515,7 +2517,7 @@ msgstr ""
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3252,6 +3254,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr ""
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr ""
@@ -3507,7 +3513,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/cs.po

@@ -405,12 +405,14 @@ msgstr "Adresa musí být %d bajtů dlouhá"
 msgid "All CAN peripherals are in use"
 msgstr "Všechny CAN periferie jsou používány"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Všechny I2C periferie jsou používány"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1605,7 +1607,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2337,11 +2339,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2533,7 +2535,7 @@ msgstr ""
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3270,6 +3272,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr ""
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr ""
@@ -3525,7 +3531,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/de_DE.po

@@ -407,12 +407,14 @@ msgstr "Die Adresse muss %d Bytes lang sein"
 msgid "All CAN peripherals are in use"
 msgstr "Alle CAN-Schnittstellen sind in Benutzung"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Alle I2C-Peripheriegeräte sind in Benutzung"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1624,7 +1626,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Nur ein TouchAlarm kann in Deep Sleep gesetzt werden."
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr "Nur eine Adresse ist erlaubt"
 
@@ -2389,11 +2391,11 @@ msgstr "__new__ arg muss user-type sein"
 msgid "a bytes-like object is required"
 msgstr "ein Byte-ähnliches Objekt ist erforderlich"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "Adresse außerhalb der Grenzen"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "addresses ist leer"
 
@@ -2587,7 +2589,7 @@ msgstr "kann keinem Ausdruck zuweisen"
 msgid "can't cancel self"
 msgstr "kann self nicht abbrechen"
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "kann %q nicht zu %q konvertieren"
@@ -3336,6 +3338,10 @@ msgstr "ungültiger Hostname"
 msgid "invalid micropython decorator"
 msgstr "ungültiger micropython decorator"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "ungültiger Schritt (step)"
@@ -3597,7 +3603,7 @@ msgstr "kein Reset Pin verfügbar"
 msgid "no response from SD card"
 msgstr "keine Antwort von der SD-Karte"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "kein solches Attribut"
 

locale/el.po

@@ -398,12 +398,14 @@ msgstr ""
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1589,7 +1591,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2319,11 +2321,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2515,7 +2517,7 @@ msgstr ""
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3252,6 +3254,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr ""
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr ""
@@ -3507,7 +3513,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/en_GB.po

@@ -408,12 +408,14 @@ msgstr "Address must be %d bytes long"
 msgid "All CAN peripherals are in use"
 msgstr "All CAN peripherals are in use"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "All I2C peripherals are in use"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1609,7 +1611,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Only one TouchAlarm can be set in deep sleep."
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2353,11 +2355,11 @@ msgstr "__new__ arg must be a user-type"
 msgid "a bytes-like object is required"
 msgstr "a bytes-like object is required"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "address out of bounds"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "addresses is empty"
 
@@ -2549,7 +2551,7 @@ msgstr "Can't assign to expression"
 msgid "can't cancel self"
 msgstr "can't cancel self"
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "Can't convert %q to %q"
@@ -3289,6 +3291,10 @@ msgstr "invalid hostname"
 msgid "invalid micropython decorator"
 msgstr "invalid micropython decorator"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "invalid step"
@@ -3544,7 +3550,7 @@ msgstr "no reset pin available"
 msgid "no response from SD card"
 msgstr "no response from SD card"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "no such attribute"
 

locale/es.po

@@ -407,12 +407,14 @@ msgstr "La dirección debe tener %d bytes de largo"
 msgid "All CAN peripherals are in use"
 msgstr "Todos los periféricos CAN están en uso"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Todos los periféricos I2C están siendo usados"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1630,7 +1632,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Solamente una TouchAlarm puede ser configurada durante deep sleep."
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2386,11 +2388,11 @@ msgstr "__new__ arg debe ser un user-type"
 msgid "a bytes-like object is required"
 msgstr "se requiere un objeto bytes-like"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "address fuera de límites"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "addresses esta vacío"
 
@@ -2582,7 +2584,7 @@ msgstr "no se puede asignar a la expresión"
 msgid "can't cancel self"
 msgstr "no se puede cancelar a si mismo"
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "no puede convertir %q a %q"
@@ -3326,6 +3328,10 @@ msgstr "hostname inválido"
 msgid "invalid micropython decorator"
 msgstr "decorador de micropython inválido"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "paso inválido"
@@ -3585,7 +3591,7 @@ msgstr "no hay pin de reinicio disponible"
 msgid "no response from SD card"
 msgstr "no hay respuesta de la tarjeta SD"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "no hay tal atributo"
 

locale/fil.po

@@ -401,12 +401,14 @@ msgstr "ang palette ay dapat 32 bytes ang haba"
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1605,7 +1607,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2339,11 +2341,11 @@ msgstr "__new__ arg ay dapat na user-type"
 msgid "a bytes-like object is required"
 msgstr "a bytes-like object ay kailangan"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "wala sa sakop ang address"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "walang laman ang address"
 
@@ -2537,7 +2539,7 @@ msgstr "hindi ma i-assign sa expression"
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3285,6 +3287,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr "mali ang micropython decorator"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "mali ang step"
@@ -3544,7 +3550,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "walang ganoon na attribute"
 

locale/fr.po

@@ -410,12 +410,14 @@ msgstr "L'adresse doit être longue de %d octets"
 msgid "All CAN peripherals are in use"
 msgstr "Tous les périphériques CAN sont utilisés"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Tous les périphériques I2C sont utilisés"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1653,7 +1655,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Seulement une TouchAlarm peu être réglée en sommeil profond."
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr "Seulement une adresse est autorisée"
 
@@ -2420,11 +2422,11 @@ msgstr "l'argument __new__ doit être d'un type défini par l'utilisateur"
 msgid "a bytes-like object is required"
 msgstr "un objet 'bytes-like' est requis"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "adresse hors limites"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "adresses vides"
 
@@ -2617,7 +2619,7 @@ msgstr "ne peut pas assigner à une expression"
 msgid "can't cancel self"
 msgstr "ne peut pas s'annuler soi-même"
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "impossible de convertir %q en %q"
@@ -3368,6 +3370,10 @@ msgstr "hostname incorrect"
 msgid "invalid micropython decorator"
 msgstr "décorateur micropython invalide"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "pas invalide"
@@ -3628,7 +3634,7 @@ msgstr "pas de broche de réinitialisation disponible"
 msgid "no response from SD card"
 msgstr "pas de réponse de la carte SD"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "pas de tel attribut"
 

locale/hi.po

@@ -398,12 +398,14 @@ msgstr ""
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1589,7 +1591,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2319,11 +2321,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2515,7 +2517,7 @@ msgstr ""
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3252,6 +3254,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr ""
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr ""
@@ -3507,7 +3513,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/it_IT.po

@@ -407,12 +407,14 @@ msgstr "L'indirizzo deve essere lungo %d byte"
 msgid "All CAN peripherals are in use"
 msgstr "Tutte le periferiche CAN sono in uso"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1612,7 +1614,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2349,11 +2351,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr "un oggetto byte-like è richiesto"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "indirizzo fuori limite"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "gli indirizzi sono vuoti"
 
@@ -2549,7 +2551,7 @@ msgstr "impossibile assegnare all'espressione"
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3293,6 +3295,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr "decoratore non valido in micropython"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "step non valida"
@@ -3553,7 +3559,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "attributo inesistente"
 

locale/ja.po

@@ -403,12 +403,14 @@ msgstr "アドレスは、%dバイト長でなければなりません"
 msgid "All CAN peripherals are in use"
 msgstr "全てのCAN周辺機器が使用中"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "全てのI2C周辺機器が使用中"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1602,7 +1604,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2333,11 +2335,11 @@ msgstr "__new__の引数はユーザ型でなければなりません"
 msgid "a bytes-like object is required"
 msgstr "bytes-likeオブジェクトが必要"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "アドレスが範囲外"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2529,7 +2531,7 @@ msgstr "式には代入できません"
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "%qを%qに変換できません"
@@ -3271,6 +3273,10 @@ msgstr "不正なホスト名"
 msgid "invalid micropython decorator"
 msgstr "不正なmicropythonデコレータ"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "不正なステップ"
@@ -3526,7 +3532,7 @@ msgstr "利用可能なリセットピンがありません"
 msgid "no response from SD card"
 msgstr "SDカードからの応答がありません"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "指定の属性はありません"
 

locale/ko.po

@@ -399,12 +399,14 @@ msgstr ""
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "사용중인 모든 I2C주변 기기"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1592,7 +1594,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2323,11 +2325,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2519,7 +2521,7 @@ msgstr ""
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3256,6 +3258,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr ""
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "단계(step)가 유효하지 않습니다"
@@ -3511,7 +3517,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/nl.po

@@ -401,12 +401,14 @@ msgstr "Adres moet %d bytes lang zijn"
 msgid "All CAN peripherals are in use"
 msgstr "Alle CAN-peripherals zijn in gebruik"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Alle I2C peripherals zijn in gebruik"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1606,7 +1608,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2349,11 +2351,11 @@ msgstr "__new__ arg moet een user-type zijn"
 msgid "a bytes-like object is required"
 msgstr "een bytes-achtig object is vereist"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "adres buiten bereik"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "adressen zijn leeg"
 
@@ -2546,7 +2548,7 @@ msgstr "kan niet toewijzen aan expressie"
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "kan %q niet naar %q converteren"
@@ -3286,6 +3288,10 @@ msgstr "onjuiste hostnaam"
 msgid "invalid micropython decorator"
 msgstr "ongeldige micropython decorator"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "ongeldige stap"
@@ -3544,7 +3550,7 @@ msgstr "geen reset pin beschikbaar"
 msgid "no response from SD card"
 msgstr "geen antwoord van SD kaart"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "niet zo'n attribuut"
 

locale/pl.po

@@ -403,12 +403,14 @@ msgstr "Adres musi mieć %d bajtów"
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Wszystkie peryferia I2C w użyciu"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1600,7 +1602,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2330,11 +2332,11 @@ msgstr "Argument __new__ musi być typu użytkownika"
 msgid "a bytes-like object is required"
 msgstr "wymagany obiekt typu bytes"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "adres poza zakresem"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "adres jest pusty"
 
@@ -2526,7 +2528,7 @@ msgstr "przypisanie do wyrażenia"
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "nie można dokonać konwersji %q na %q"
@@ -3264,6 +3266,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr "zły dekorator micropythona"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "zły krok"
@@ -3519,7 +3525,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "nie ma takiego atrybutu"
 

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2022-08-07 15:16+0000\n"
+"PO-Revision-Date: 2022-08-10 07:18+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -411,12 +411,14 @@ msgstr "O endereço deve ter %d bytes de comprimento"
 msgid "All CAN peripherals are in use"
 msgstr "Todos os periféricos CAN estão em uso"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Todos os periféricos I2C estão em uso"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr "Todos os alvos I2C já estão em uso"
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1635,7 +1637,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Apenas um TouchAlarm pode ser colocado em deep sleep."
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr "Apenas um endereço é permitido"
 
@@ -2402,11 +2404,11 @@ msgstr "O argumento __new__ deve ser um tipo usuário"
 msgid "a bytes-like object is required"
 msgstr "é necessário objetos tipo bytes"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "endereço fora dos limites"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "os endereços estão vazios"
 
@@ -2598,7 +2600,7 @@ msgstr "a expressão não pode ser atribuída"
 msgid "can't cancel self"
 msgstr "não é possível cancelar a si mesmo"
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "não é possível converter %q para %q"
@@ -3345,6 +3347,10 @@ msgstr "o nome do host é inválido"
 msgid "invalid micropython decorator"
 msgstr "o decorador micropython é inválido"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr "configuração inválida"
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "passo inválido"
@@ -3605,7 +3611,7 @@ msgstr "nenhum pino de redefinição está disponível"
 msgid "no response from SD card"
 msgstr "não houve resposta do cartão SD"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "não há tal atributo"
 

locale/ru.po

@@ -406,12 +406,14 @@ msgstr "Адрес должен быть длиной %d байт"
 msgid "All CAN peripherals are in use"
 msgstr "Все периферийные устройства CAN уже используются"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Все периферийные устройства I2C уже используются"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1631,7 +1633,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2368,11 +2370,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2564,7 +2566,7 @@ msgstr ""
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3301,6 +3303,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr ""
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr ""
@@ -3556,7 +3562,7 @@ msgstr "нет доступного контакта сброса"
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/sv.po

@@ -406,12 +406,14 @@ msgstr "Adressen måste vara %d byte lång"
 msgid "All CAN peripherals are in use"
 msgstr "All I2C-kringutrustning används"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "All I2C-kringutrustning används"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1615,7 +1617,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Endast ett TouchAlarm kan ställas in för djupsömn."
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr "Endast en adress är tillåten"
 
@@ -2372,11 +2374,11 @@ msgstr "__new__ arg måste vara en användartyp"
 msgid "a bytes-like object is required"
 msgstr "ett bytesliknande objekt krävs"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "adress utanför gränsen"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "adresserna är tomma"
 
@@ -2568,7 +2570,7 @@ msgstr "kan inte tilldela uttryck"
 msgid "can't cancel self"
 msgstr "kan inte avbryta sig själv"
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "kan inte konvertera %q till %q"
@@ -3310,6 +3312,10 @@ msgstr "Ogiltigt värdnamn"
 msgid "invalid micropython decorator"
 msgstr "ogiltig mikropython-dekorator"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "ogiltigt steg"
@@ -3568,7 +3574,7 @@ msgstr "ingen reset-pinne tillgänglig"
 msgid "no response from SD card"
 msgstr "inget svar från SD-kort"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "inget sådant attribut"
 

locale/tr.po

@@ -412,12 +412,14 @@ msgstr "Adres %d byte uzunluğunda olmalıdır"
 msgid "All CAN peripherals are in use"
 msgstr "Tüm CAN çevre birimleri kullanımda"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Tüm I2C çevre birimleri kullanımda"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1606,7 +1608,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr ""
 
@@ -2339,11 +2341,11 @@ msgstr ""
 msgid "a bytes-like object is required"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -2535,7 +2537,7 @@ msgstr ""
 msgid "can't cancel self"
 msgstr ""
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr ""
@@ -3272,6 +3274,10 @@ msgstr ""
 msgid "invalid micropython decorator"
 msgstr ""
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr ""
@@ -3527,7 +3533,7 @@ msgstr ""
 msgid "no response from SD card"
 msgstr ""
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr ""
 

locale/zh_Latn_pinyin.po

@@ -409,12 +409,14 @@ msgstr "dìzhǐ chángdù bìxū shì %d zìjié"
 msgid "All CAN peripherals are in use"
 msgstr "suǒyǒu CAN wàishè dōu zài shǐyòng zhōng"
 
-#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
-#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "suǒyǒu I2C wàishè dōu zài shǐyòng zhōng"
 
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
+msgid "All I2C targets are in use"
+msgstr ""
+
 #: ports/espressif/common-hal/countio/Counter.c
 #: ports/espressif/common-hal/frequencyio/FrequencyIn.c
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
@@ -1630,7 +1632,7 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "zhǐ yǒu yí gè chù mō bì kě yǐ shè zhì zài shēn dù shuì mián."
 
-#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
 msgid "Only one address is allowed"
 msgstr "zhǐ yǔn xǔ yí gè dì zhǐ"
 
@@ -2384,11 +2386,11 @@ msgstr "__new__ cānshù bìxū shì yònghù lèixíng"
 msgid "a bytes-like object is required"
 msgstr "xūyào yīgè zì jié lèi duìxiàng"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "address out of bounds"
 msgstr "dìzhǐ chāochū biānjiè"
 
-#: shared-bindings/i2cperipheral/I2CPeripheral.c
+#: shared-bindings/i2ctarget/I2CTarget.c
 msgid "addresses is empty"
 msgstr "dìzhǐ wèi kōng"
 
@@ -2580,7 +2582,7 @@ msgstr "bùnéng fēnpèi dào biǎodá shì"
 msgid "can't cancel self"
 msgstr "bù néng qǔ xiāo zì wǒ"
 
-#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
+#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
 #: shared-module/adafruit_pixelbuf/PixelBuf.c
 msgid "can't convert %q to %q"
 msgstr "Wúfǎ jiāng %q zhuǎnhuàn wèi %q"
@@ -3323,6 +3325,10 @@ msgstr "wú xiào zhǔ jī míng"
 msgid "invalid micropython decorator"
 msgstr "wúxiào de MicroPython zhuāngshì qì"
 
+#: ports/espressif/common-hal/esp32_camera/Camera.c
+msgid "invalid setting"
+msgstr ""
+
 #: shared-bindings/random/__init__.c
 msgid "invalid step"
 msgstr "wúxiào bùzhòu"
@@ -3579,7 +3585,7 @@ msgstr "Méiyǒu kěyòng de fùwèi yǐn jiǎo"
 msgid "no response from SD card"
 msgstr "SD kǎ wú huíyīng"
 
-#: py/objobject.c py/runtime.c
+#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
 msgid "no such attribute"
 msgstr "méiyǒu cǐ shǔxìng"
 

main.c

@@ -213,8 +213,9 @@ void supervisor_execution_status(void) {
     if (_current_executing_filename != NULL) {
         serial_write(_current_executing_filename);
     } else if ((_exec_result.return_code & PYEXEC_EXCEPTION) != 0 &&
+               _exec_result.exception_line > 0 &&
                exception != NULL) {
-        mp_printf(&mp_plat_print, "@%d %q", _exec_result.exception_line, exception->base.type->name);
+        mp_printf(&mp_plat_print, "%d@%s %q", _exec_result.exception_line, _exec_result.exception_filename, exception->base.type->name);
     } else {
         serial_write_compressed(translate("Done"));
     }

ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk

@@ -11,5 +11,3 @@ CIRCUITPY_BUILD_EXTENSIONS = bin,uf2
 INTERNAL_FLASH_FILESYSTEM = 1
 LONGINT_IMPL = NONE
 CIRCUITPY_FULL_BUILD = 0
-
-CIRCUITPY_ONEWIREIO = 0

ports/atmel-samd/boards/bdmicro_vina_d21/mpconfigboard.mk

@@ -9,5 +9,3 @@ CHIP_FAMILY = samd21
 SPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICES = "MX25L51245G","GD25S512MD"
 LONGINT_IMPL = MPZ
-
-CIRCUITPY_ONEWIREIO = 0

ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk

@@ -15,7 +15,6 @@ LONGINT_IMPL = NONE
 CIRCUITPY_BUSDEVICE = 1
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_KEYPAD = 0
-CIRCUITPY_ONEWIREIO = 0
 
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground/frozen_cpx

ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk

@@ -12,7 +12,6 @@ EXTERNAL_FLASH_DEVICES = "S25FL216K, GD25Q16C"
 # Turn off features and optimizations for displayio build to make room for additional frozen libs.
 LONGINT_IMPL = NONE
 CIRCUITPY_KEYPAD = 0
-CIRCUITPY_ONEWIREIO = 0
 CIRCUITPY_PIXELBUF = 0
 CIRCUITPY_ROTARYIO = 0
 CIRCUITPY_RTC = 0

ports/atmel-samd/boards/feather_m0_supersized/mpconfigboard.mk

@@ -9,5 +9,3 @@ CHIP_FAMILY = samd21
 SPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICES = "S25FL064L"
 LONGINT_IMPL = MPZ
-
-CIRCUITPY_ONEWIREIO = 0

ports/atmel-samd/boards/hallowing_m0_express/board.c

@@ -104,8 +104,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA00,
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/hallowing_m4_express/board.c

@@ -84,8 +84,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PB14,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/monster_m4sk/board.c

@@ -85,8 +85,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA23,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pewpew_lcd/board.c

@@ -84,7 +84,6 @@ void board_init(void) {
         NULL, // &pin_PA17, // brightness pin
         NO_BRIGHTNESS_COMMAND,
         0.0f, // brightness
-        false, // auto_brightness
         false, // single_byte_bounds
         true, // data as commands
         true, // auto_refresh

ports/atmel-samd/boards/pewpew_lcd/mpconfigboard.mk

@@ -33,7 +33,7 @@ CIRCUITPY_BLEIO = 0
 CIRCUITPY_BUSDEVICE = 0
 CIRCUITPY_FRAMEBUFFERIO = 0
 CIRCUITPY_FREQUENCYIO = 0
-CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_MSGPACK = 0
 CIRCUITPY_NEOPIXEL_WRITE = 0
 CIRCUITPY_NVM = 0

ports/atmel-samd/boards/pewpew_m4/board.c

@@ -137,8 +137,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         NULL,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         false, // auto_refresh

ports/atmel-samd/boards/pewpew_m4/mpconfigboard.mk

@@ -18,7 +18,7 @@ CIRCUITPY_AUDIOPWMIO = 0
 CIRCUITPY_BITBANGIO = 0
 CIRCUITPY_BITBANG_APA102 = 0
 CIRCUITPY_FREQUENCYIO = 0
-CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_NEOPIXEL_WRITE = 0
 CIRCUITPY_PARALLELDISPLAY = 0
 CIRCUITPY_PIXELBUF = 0

ports/atmel-samd/boards/pybadge/board.c

@@ -105,8 +105,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA01,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pygamer/board.c

@@ -107,8 +107,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PA01,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pyportal/board.c

@@ -94,8 +94,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PB31, // Backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/pyportal_titano/board.c

@@ -111,8 +111,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PB31, // Backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/seeeduino_wio_terminal/board.c

@@ -102,8 +102,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_PC05,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/atmel-samd/boards/seeeduino_xiao_kb/mpconfigboard.mk

@@ -22,8 +22,8 @@ CIRCUITPY_RTC = 0
 CIRCUITPY_MATH = 0
 #CIRCUITPY_RANDOM = 0
 CIRCUITPY_ONEWIREIO = 0
-#CIRCUITPY_NEOPIXEL_WRITE = 1 # Needed fo RGB LEDs
+CIRCUITPY_NEOPIXEL_WRITE = 1 # Needed for RGB LEDs
-#CIRCUITPY_RAINBOWIO = 1  # Needed fo RGB LEDs
+CIRCUITPY_RAINBOWIO = 1  # Needed for RGB LEDs
 # These are used in a keyboard or computer input device.
 CIRCUITPY_ROTARYIO = 1
 CIRCUITPY_KEYPAD = 1

ports/atmel-samd/boards/sensebox_mcu/mpconfigboard.mk

@@ -11,5 +11,4 @@ LONGINT_IMPL = NONE
 CIRCUITPY_FULL_BUILD = 0
 
 # There are many pin definitions on this board; it doesn't quite fit on very large translations.
-CIRCUITPY_ONEWIREIO = 0
 CIRCUITPY_USB_MIDI = 0

ports/atmel-samd/boards/sparkfun_redboard_turbo/mpconfigboard.mk

@@ -9,5 +9,3 @@ CHIP_FAMILY = samd21
 SPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICES = "W25Q32FV"
 LONGINT_IMPL = MPZ
-
-CIRCUITPY_ONEWIREIO = 0

ports/atmel-samd/boards/stackrduino_m0_pro/mpconfigboard.mk

@@ -9,5 +9,3 @@ CHIP_FAMILY = samd21
 SPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICES = "W25Q64JVxQ"
 LONGINT_IMPL = MPZ
-
-CIRCUITPY_ONEWIREIO = 0

ports/atmel-samd/boards/ugame10/board.c

@@ -105,7 +105,6 @@ void board_init(void) {
         NULL,
         NO_BRIGHTNESS_COMMAND,
         1.0f, // brightness
-        false, // auto_brightness
         false, // single_byte_bounds
         false, // data as commands
         true, // auto_refresh

ports/atmel-samd/boards/ugame10/mpconfigboard.mk

@@ -22,7 +22,7 @@ CIRCUITPY_AUDIOBUSIO = 0
 CIRCUITPY_BITBANGIO = 0
 CIRCUITPY_BITMAPTOOLS = 0
 CIRCUITPY_FREQUENCYIO = 0
-CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_NEOPIXEL_WRITE = 0
 CIRCUITPY_PARALLELDISPLAY = 0
 CIRCUITPY_PIXELBUF = 0

ports/atmel-samd/boards/winterbloom_big_honking_button/mpconfigboard.mk

@@ -23,7 +23,7 @@ CIRCUITPY_AUDIOBUSIO = 0
 CIRCUITPY_BLEIO = 0
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_KEYPAD = 0
-CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_TOUCHIO = 0
 CIRCUITPY_RGBMATRIX = 0
 CIRCUITPY_PS2IO = 0

ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk

@@ -22,7 +22,7 @@ CIRCUITPY_BLEIO_HCI = 0
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_FRAMEBUFFERIO = 0
 CIRCUITPY_KEYPAD = 0
-CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_TOUCHIO = 0
 CIRCUITPY_RGBMATRIX = 0
 CIRCUITPY_PS2IO = 0

ports/atmel-samd/common-hal/i2cperipheral/__init__.c

@@ -1 +0,0 @@
-// No i2cperipheral module functions.

ports/atmel-samd/common-hal/i2ctarget/I2CTarget.c

@@ -24,7 +24,7 @@
  * THE SOFTWARE.
  */
 
-#include "shared-bindings/i2cperipheral/I2CPeripheral.h"
+#include "shared-bindings/i2ctarget/I2CTarget.h"
 #include "shared-bindings/microcontroller/Pin.h"
 #include "common-hal/busio/I2C.h"
 
@@ -36,7 +36,7 @@
 #include "hal/include/hal_gpio.h"
 #include "peripherals/samd/sercom.h"
 
-void common_hal_i2cperipheral_i2c_peripheral_construct(i2cperipheral_i2c_peripheral_obj_t *self,
+void common_hal_i2ctarget_i2c_target_construct(i2ctarget_i2c_target_obj_t *self,
     const mcu_pin_obj_t *scl, const mcu_pin_obj_t *sda,
     uint8_t *addresses, unsigned int num_addresses, bool smbus) {
     uint8_t sercom_index;
@@ -100,12 +100,12 @@ void common_hal_i2cperipheral_i2c_peripheral_construct(i2cperipheral_i2c_periphe
     sercom->I2CS.CTRLA.bit.ENABLE = 1;
 }
 
-bool common_hal_i2cperipheral_i2c_peripheral_deinited(i2cperipheral_i2c_peripheral_obj_t *self) {
+bool common_hal_i2ctarget_i2c_target_deinited(i2ctarget_i2c_target_obj_t *self) {
     return self->sda_pin == NO_PIN;
 }
 
-void common_hal_i2cperipheral_i2c_peripheral_deinit(i2cperipheral_i2c_peripheral_obj_t *self) {
+void common_hal_i2ctarget_i2c_target_deinit(i2ctarget_i2c_target_obj_t *self) {
-    if (common_hal_i2cperipheral_i2c_peripheral_deinited(self)) {
+    if (common_hal_i2ctarget_i2c_target_deinited(self)) {
         return;
     }
 
@@ -117,7 +117,7 @@ void common_hal_i2cperipheral_i2c_peripheral_deinit(i2cperipheral_i2c_peripheral
     self->scl_pin = NO_PIN;
 }
 
-static int i2c_peripheral_check_error(i2cperipheral_i2c_peripheral_obj_t *self, bool raise) {
+static int i2c_target_check_error(i2ctarget_i2c_target_obj_t *self, bool raise) {
     if (!self->sercom->I2CS.INTFLAG.bit.ERROR) {
         return 0;
     }
@@ -136,8 +136,8 @@ static int i2c_peripheral_check_error(i2cperipheral_i2c_peripheral_obj_t *self,
     return -err;
 }
 
-int common_hal_i2cperipheral_i2c_peripheral_is_addressed(i2cperipheral_i2c_peripheral_obj_t *self, uint8_t *address, bool *is_read, bool *is_restart) {
+int common_hal_i2ctarget_i2c_target_is_addressed(i2ctarget_i2c_target_obj_t *self, uint8_t *address, bool *is_read, bool *is_restart) {
-    int err = i2c_peripheral_check_error(self, false);
+    int err = i2c_target_check_error(self, false);
     if (err) {
         return err;
     }
@@ -154,22 +154,22 @@ int common_hal_i2cperipheral_i2c_peripheral_is_addressed(i2cperipheral_i2c_perip
 
     for (unsigned int i = 0; i < self->num_addresses; i++) {
         if (*address == self->addresses[i]) {
-            common_hal_i2cperipheral_i2c_peripheral_ack(self, true);
+            common_hal_i2ctarget_i2c_target_ack(self, true);
             return 1;
         }
     }
 
     // This should clear AMATCH, but it doesn't...
-    common_hal_i2cperipheral_i2c_peripheral_ack(self, false);
+    common_hal_i2ctarget_i2c_target_ack(self, false);
     return 0;
 }
 
-int common_hal_i2cperipheral_i2c_peripheral_read_byte(i2cperipheral_i2c_peripheral_obj_t *self, uint8_t *data) {
+int common_hal_i2ctarget_i2c_target_read_byte(i2ctarget_i2c_target_obj_t *self, uint8_t *data) {
     for (int t = 0; t < 100 && !self->sercom->I2CS.INTFLAG.reg; t++) {
         mp_hal_delay_us(10);
     }
 
-    i2c_peripheral_check_error(self, true);
+    i2c_target_check_error(self, true);
 
     if (!self->sercom->I2CS.INTFLAG.bit.DRDY ||
         self->sercom->I2CS.INTFLAG.bit.PREC ||
@@ -181,12 +181,12 @@ int common_hal_i2cperipheral_i2c_peripheral_read_byte(i2cperipheral_i2c_peripher
     return 1;
 }
 
-int common_hal_i2cperipheral_i2c_peripheral_write_byte(i2cperipheral_i2c_peripheral_obj_t *self, uint8_t data) {
+int common_hal_i2ctarget_i2c_target_write_byte(i2ctarget_i2c_target_obj_t *self, uint8_t data) {
     for (int t = 0; !self->sercom->I2CS.INTFLAG.reg && t < 100; t++) {
         mp_hal_delay_us(10);
     }
 
-    i2c_peripheral_check_error(self, true);
+    i2c_target_check_error(self, true);
 
     if (self->sercom->I2CS.INTFLAG.bit.PREC) {
         return 0;
@@ -208,12 +208,12 @@ int common_hal_i2cperipheral_i2c_peripheral_write_byte(i2cperipheral_i2c_periphe
     return 1;
 }
 
-void common_hal_i2cperipheral_i2c_peripheral_ack(i2cperipheral_i2c_peripheral_obj_t *self, bool ack) {
+void common_hal_i2ctarget_i2c_target_ack(i2ctarget_i2c_target_obj_t *self, bool ack) {
     self->sercom->I2CS.CTRLB.bit.ACKACT = !ack;
     self->sercom->I2CS.CTRLB.bit.CMD = 0x03;
 }
 
-void common_hal_i2cperipheral_i2c_peripheral_close(i2cperipheral_i2c_peripheral_obj_t *self) {
+void common_hal_i2ctarget_i2c_target_close(i2ctarget_i2c_target_obj_t *self) {
     for (int t = 0; !self->sercom->I2CS.INTFLAG.reg && t < 100; t++) {
         mp_hal_delay_us(10);
     }
@@ -223,7 +223,7 @@ void common_hal_i2cperipheral_i2c_peripheral_close(i2cperipheral_i2c_peripheral_
     }
 
     if (!self->sercom->I2CS.STATUS.bit.DIR) {
-        common_hal_i2cperipheral_i2c_peripheral_ack(self, false);
+        common_hal_i2ctarget_i2c_target_ack(self, false);
     } else {
         int i = 0;
         while (self->sercom->I2CS.INTFLAG.reg == SERCOM_I2CS_INTFLAG_DRDY) {

ports/atmel-samd/common-hal/i2ctarget/I2CTarget.h

@@ -24,8 +24,8 @@
  * THE SOFTWARE.
  */
 
-#ifndef MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_BUSIO_I2C_PERIPHERAL_H
+#ifndef MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_BUSIO_I2C_TARGET_H
-#define MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_BUSIO_I2C_PERIPHERAL_H
+#define MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_BUSIO_I2C_TARGET_H
 
 #include "common-hal/microcontroller/Pin.h"
 #include "py/obj.h"
@@ -40,6 +40,6 @@ typedef struct {
     uint8_t scl_pin;
     uint8_t sda_pin;
     bool writing;
-} i2cperipheral_i2c_peripheral_obj_t;
+} i2ctarget_i2c_target_obj_t;
 
-#endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_BUSIO_I2C_PERIPHERAL_H
+#endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_BUSIO_I2C_TARGET_H

ports/atmel-samd/common-hal/i2ctarget/__init__.c

@@ -0,0 +1 @@
+// No i2ctarget module functions.

ports/atmel-samd/mpconfigport.mk

@@ -38,7 +38,7 @@ CIRCUITPY_FRAMEBUFFERIO ?= 0
 CIRCUITPY_FREQUENCYIO ?= 0
 CIRCUITPY_GETPASS ?= 0
 CIRCUITPY_GIFIO ?= 0
-CIRCUITPY_I2CPERIPHERAL ?= 0
+CIRCUITPY_I2CTARGET ?= 0
 CIRCUITPY_JSON ?= 0
 CIRCUITPY_KEYPAD ?= 0
 CIRCUITPY_MSGPACK ?= 0

ports/broadcom/mpconfigport.mk

@@ -9,7 +9,7 @@ CIRCUITPY_AUDIOBUSIO = 0
 CIRCUITPY_AUDIOIO = 0
 CIRCUITPY_COUNTIO = 0
 CIRCUITPY_FREQUENCYIO = 0
-CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_NVM = 0
 CIRCUITPY_PARALLELDISPLAY = 0
 CIRCUITPY_PULSEIO = 0

ports/cxd56/mpconfigport.mk

@@ -15,7 +15,7 @@ CIRCUITPY_COUNTIO = 0
 CIRCUITPY_DISPLAYIO = 0
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_GNSS = 1
-CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_I2CTARGET = 0
 CIRCUITPY_KEYPAD = 0
 CIRCUITPY_NEOPIXEL_WRITE = 0
 CIRCUITPY_NVM = 0

ports/espressif/CMakeLists.txt

@@ -8,6 +8,13 @@ set(ENV{IDF_PATH} ${CMAKE_SOURCE_DIR}/esp-idf)
 # can build.
 set(COMPONENTS esptool_py soc driver log main esp-tls mbedtls mdns esp_event esp_adc_cal esp_netif esp_wifi lwip wpa_supplicant freertos bt usb)
 
+if("${CIRCUITPY_ESP32_CAMERA}")
+message("Including esp32-camera")
+set(EXTRA_COMPONENT_DIRS "esp32-camera")
+list(APPEND COMPONENTS "esp32-camera")
+message("COMPONENTS = ${COMPONENTS}")
+endif()
+
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(circuitpython)
 

ports/espressif/Makefile

@@ -261,7 +261,6 @@ SRC_C += \
 	peripherals/touch.c
 ifeq ($(IDF_TARGET),esp32s2)
 SRC_C += \
-	cam.c \
 	i2s_lcd_esp32s2_driver.c
 endif
 endif
@@ -283,6 +282,15 @@ endif
 
 SRC_C += $(wildcard common-hal/espidf/*.c)
 
+ifneq ($(CIRCUITPY_ESP32_CAMERA),0)
+SRC_CAMERA := \
+	$(wildcard common-hal/esp32_camera/*.c) \
+	$(wildcard bindings/esp32_camera/*.c)
+SRC_C += $(SRC_CAMERA)
+CFLAGS += -isystem esp32-camera/driver/include
+CFLAGS += -isystem esp32-camera/conversions/include
+endif
+
 SRC_COMMON_HAL_EXPANDED = \
 	$(addprefix shared-bindings/, $(SRC_COMMON_HAL)) \
 	$(addprefix shared-bindings/, $(SRC_BINDINGS_ENUMS)) \
@@ -341,8 +349,10 @@ ifneq ($(CIRCUITPY_BLEIO),0)
 	SDKCONFIGS := esp-idf-config/sdkconfig-ble.defaults;$(SDKCONFIGS)
 endif
 # create the config headers
-$(BUILD)/esp-idf/config/sdkconfig.h: boards/$(BOARD)/sdkconfig | $(BUILD)/esp-idf
+.PHONY: do-sdkconfig
-	IDF_PATH=$(IDF_PATH) cmake -S . -B $(BUILD)/esp-idf -DSDKCONFIG=$(BUILD)/esp-idf/sdkconfig -DSDKCONFIG_DEFAULTS="$(SDKCONFIGS)" -DCMAKE_TOOLCHAIN_FILE=$(IDF_PATH)/tools/cmake/toolchain-$(IDF_TARGET).cmake -DIDF_TARGET=$(IDF_TARGET) -GNinja
+do-sdkconfig: $(BUILD)/esp-idf/config/sdkconfig.h
+$(BUILD)/esp-idf/config/sdkconfig.h: boards/$(BOARD)/sdkconfig CMakeLists.txt | $(BUILD)/esp-idf
+	IDF_PATH=$(IDF_PATH) cmake -S . -B $(BUILD)/esp-idf -DSDKCONFIG=$(BUILD)/esp-idf/sdkconfig -DSDKCONFIG_DEFAULTS="$(SDKCONFIGS)" -DCMAKE_TOOLCHAIN_FILE=$(IDF_PATH)/tools/cmake/toolchain-$(IDF_TARGET).cmake -DIDF_TARGET=$(IDF_TARGET) -GNinja -DCIRCUITPY_ESP32_CAMERA=$(CIRCUITPY_ESP32_CAMERA)
 
 # build a lib
 # Adding -d explain -j 1 -v to the ninja line will output debug info
@@ -391,6 +401,11 @@ BINARY_BLOBS += esp-idf/components/xtensa/$(IDF_TARGET)/libxt_hal.a
 ESP_IDF_COMPONENTS_EXPANDED += esp-idf/components/xtensa/$(IDF_TARGET)/libxt_hal.a
 endif
 
+ifneq ($(CIRCUITPY_ESP32_CAMERA),0)
+ESP_IDF_COMPONENTS_EXPANDED += $(BUILD)/esp-idf/esp-idf/esp32-camera/libesp32-camera.a
+#$(error $(ESP_IDF_COMPONENTS_EXPANDED))
+endif
+
 # BOOTLOADER_OFFSET is determined by chip type, based on the ROM bootloader, and is not changeable.
 ifeq ($(IDF_TARGET),esp32)
 BOOTLOADER_OFFSET = 0x1000

ports/espressif/bindings/esp32_camera/Camera.h

@@ -0,0 +1,116 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Jeff Epler for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#pragma once
+
+#include "py/enum.h"
+#include "py/obj.h"
+
+#include "esp_camera.h"
+
+#include "shared-bindings/busio/I2C.h"
+
+extern const mp_obj_type_t esp32_camera_camera_type;
+typedef struct esp32_camera_camera_obj esp32_camera_camera_obj_t;
+
+extern void common_hal_esp32_camera_camera_construct(
+    esp32_camera_camera_obj_t *self,
+    uint8_t data_pins[8],
+    const mcu_pin_obj_t *external_clock_pin,
+    const mcu_pin_obj_t *pixel_clock_pin,
+    const mcu_pin_obj_t *vsync_pin,
+    const mcu_pin_obj_t *href_pin,
+    const mcu_pin_obj_t *powerdown_pin,
+    const mcu_pin_obj_t *reset_pin,
+    const busio_i2c_obj_t *i2c,
+    mp_int_t external_clock_frequency,
+    pixformat_t pixel_format,
+    framesize_t frame_size,
+    mp_int_t jpeg_quality,
+    mp_int_t framebuffer_count,
+    camera_grab_mode_t grab_mode);
+
+extern void common_hal_esp32_camera_camera_deinit(esp32_camera_camera_obj_t *self);
+extern bool common_hal_esp32_camera_camera_deinited(esp32_camera_camera_obj_t *self);
+extern bool common_hal_esp32_camera_camera_available(esp32_camera_camera_obj_t *self);
+extern camera_fb_t *common_hal_esp32_camera_camera_take(esp32_camera_camera_obj_t *self, int timeout_ms);
+extern void common_hal_esp32_camera_camera_reconfigure(esp32_camera_camera_obj_t *self, framesize_t frame_size, pixformat_t pixel_format, camera_grab_mode_t grab_mode, mp_int_t framebuffer_count);
+
+#define DECLARE_SENSOR_GETSET(type, name, field_name, setter_function_name) \
+    DECLARE_SENSOR_GET(type, name, field_name, setter_function_name) \
+    DECLARE_SENSOR_SET(type, name, setter_function_name)
+
+#define DECLARE_SENSOR_STATUS_GETSET(type, name, status_field_name, setter_function_name) \
+    DECLARE_SENSOR_GETSET(type, name, status.status_field_name, setter_function_name)
+
+#define DECLARE_SENSOR_STATUS_GET(type, name, status_field_name, setter_function_name) \
+    DECLARE_SENSOR_GET(type, name, status.status_field_name, setter_function_name)
+
+#define DECLARE_SENSOR_GET(type, name, status_field_name, setter_function_name) \
+    extern type common_hal_esp32_camera_camera_get_##name(esp32_camera_camera_obj_t * self);
+
+#define DECLARE_SENSOR_SET(type, name, setter_function_name) \
+    extern void common_hal_esp32_camera_camera_set_##name(esp32_camera_camera_obj_t * self, type value);
+
+DECLARE_SENSOR_GET(pixformat_t, pixel_format, pixformat, set_pixformat)
+DECLARE_SENSOR_STATUS_GET(framesize_t, frame_size, framesize, set_framesize)
+DECLARE_SENSOR_STATUS_GETSET(int, contrast, contrast, set_contrast);
+DECLARE_SENSOR_STATUS_GETSET(int, brightness, brightness, set_brightness);
+DECLARE_SENSOR_STATUS_GETSET(int, saturation, saturation, set_saturation);
+DECLARE_SENSOR_STATUS_GETSET(int, sharpness, sharpness, set_sharpness);
+DECLARE_SENSOR_STATUS_GETSET(int, denoise, denoise, set_denoise);
+DECLARE_SENSOR_STATUS_GETSET(gainceiling_t, gainceiling, gainceiling, set_gainceiling);
+DECLARE_SENSOR_STATUS_GETSET(int, quality, quality, set_quality);
+DECLARE_SENSOR_STATUS_GETSET(bool, colorbar, colorbar, set_colorbar);
+DECLARE_SENSOR_STATUS_GETSET(bool, whitebal, whitebal, set_whitebal);
+DECLARE_SENSOR_STATUS_GETSET(bool, gain_ctrl, gain_ctrl, set_gain_ctrl);
+DECLARE_SENSOR_STATUS_GETSET(bool, exposure_ctrl, exposure_ctrl, set_exposure_ctrl);
+DECLARE_SENSOR_STATUS_GETSET(bool, hmirror, hmirror, set_hmirror);
+DECLARE_SENSOR_STATUS_GETSET(bool, vflip, vflip, set_vflip);
+DECLARE_SENSOR_STATUS_GETSET(bool, aec2, aec2, set_aec2);
+DECLARE_SENSOR_STATUS_GETSET(bool, awb_gain, awb_gain, set_awb_gain);
+DECLARE_SENSOR_STATUS_GETSET(int, agc_gain, agc_gain, set_agc_gain);
+DECLARE_SENSOR_STATUS_GETSET(int, aec_value, aec_value, set_aec_value);
+DECLARE_SENSOR_STATUS_GETSET(int, special_effect, special_effect, set_special_effect);
+DECLARE_SENSOR_STATUS_GETSET(int, wb_mode, wb_mode, set_wb_mode);
+DECLARE_SENSOR_STATUS_GETSET(int, ae_level, ae_level, set_ae_level);
+DECLARE_SENSOR_STATUS_GETSET(bool, dcw, dcw, set_dcw);
+DECLARE_SENSOR_STATUS_GETSET(bool, bpc, bpc, set_bpc);
+DECLARE_SENSOR_STATUS_GETSET(bool, wpc, wpc, set_wpc);
+DECLARE_SENSOR_STATUS_GETSET(bool, raw_gma, raw_gma, set_raw_gma);
+DECLARE_SENSOR_STATUS_GETSET(bool, lenc, lenc, set_lenc);
+
+// From settings
+extern camera_grab_mode_t common_hal_esp32_camera_camera_get_grab_mode(esp32_camera_camera_obj_t *self);
+extern int common_hal_esp32_camera_camera_get_framebuffer_count(esp32_camera_camera_obj_t *self);
+
+// From camera_sensor_info_t
+extern int common_hal_esp32_camera_camera_get_address(esp32_camera_camera_obj_t *self);
+extern const char *common_hal_esp32_camera_camera_get_sensor_name(esp32_camera_camera_obj_t *self);
+extern const bool common_hal_esp32_camera_camera_get_supports_jpeg(esp32_camera_camera_obj_t *self);
+extern framesize_t common_hal_esp32_camera_camera_get_max_frame_size(esp32_camera_camera_obj_t *self);
+extern int common_hal_esp32_camera_camera_get_width(esp32_camera_camera_obj_t *self);
+extern int common_hal_esp32_camera_camera_get_height(esp32_camera_camera_obj_t *self);

ports/espressif/bindings/esp32_camera/__init__.c

@@ -0,0 +1,287 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Jeff Epler for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "py/obj.h"
+#include "py/runtime.h"
+#include "py/mphal.h"
+
+#include "bindings/espidf/__init__.h"
+#include "bindings/esp32_camera/__init__.h"
+#include "bindings/esp32_camera/Camera.h"
+
+#include "esp_camera.h"
+#include "sensor.h"
+
+//| """Wrapper for the esp32_camera library
+//|
+//| This library enables access to any camera sensor supported by the library,
+//| including OV5640 and OV2640.
+//|
+//| .. seealso::
+//|
+//|     Non-Espressif microcontrollers use the `imagecapture` module together with wrapper libraries such as `adafruit_ov5640 <https://circuitpython.readthedocs.io/projects/ov5640/en/latest/>`_.
+//|
+//| """
+
+//| class GrabMode:
+//|     """Controls when a new frame is grabbed."""
+//|
+//|     WHEN_EMPTY: GrabMode
+//|     """Fills buffers when they are empty. Less resources but first ``fb_count`` frames might be old"""
+//|
+//|     LATEST: GrabMode
+//|     """Except when 1 frame buffer is used, queue will always contain the last ``fb_count`` frames"""
+//|
+
+MAKE_ENUM_VALUE(esp32_camera_grab_mode_type, grab_mode, WHEN_EMPTY, CAMERA_GRAB_WHEN_EMPTY);
+MAKE_ENUM_VALUE(esp32_camera_grab_mode_type, grab_mode, LATEST, CAMERA_GRAB_LATEST);
+
+MAKE_ENUM_MAP(esp32_camera_grab_mode) {
+    MAKE_ENUM_MAP_ENTRY(grab_mode, WHEN_EMPTY),
+    MAKE_ENUM_MAP_ENTRY(grab_mode, LATEST),
+};
+
+STATIC MP_DEFINE_CONST_DICT(esp32_camera_grab_mode_locals_dict, esp32_camera_grab_mode_locals_table);
+MAKE_PRINTER(esp32_camera, esp32_camera_grab_mode);
+MAKE_ENUM_TYPE(esp32_camera, GrabMode, esp32_camera_grab_mode);
+
+camera_grab_mode_t validate_grab_mode(mp_obj_t obj, qstr arg_name) {
+    return cp_enum_value(&esp32_camera_grab_mode_type, mp_arg_validate_type(obj, &esp32_camera_grab_mode_type, arg_name));
+}
+
+//| class PixelFormat:
+//|     """Format of data in the captured frames"""
+//|
+//|     RGB565: PixelFormat
+//|     """A 16-bit format with 5 bits of Red and Blue and 6 bits of Green"""
+//|
+//|     GRAYSCALE: PixelFormat
+//|     """An 8-bit format with 8-bits of luminance"""
+//|
+//|     JPEG: PixelFormat
+//|     """A compressed format"""
+//|
+
+MAKE_ENUM_VALUE(esp32_camera_pixel_format_type, pixel_format, RGB565, PIXFORMAT_RGB565);
+MAKE_ENUM_VALUE(esp32_camera_pixel_format_type, pixel_format, GRAYSCALE, PIXFORMAT_GRAYSCALE);
+MAKE_ENUM_VALUE(esp32_camera_pixel_format_type, pixel_format, JPEG, PIXFORMAT_JPEG);
+
+MAKE_ENUM_MAP(esp32_camera_pixel_format) {
+    MAKE_ENUM_MAP_ENTRY(pixel_format, RGB565),
+    MAKE_ENUM_MAP_ENTRY(pixel_format, GRAYSCALE),
+    MAKE_ENUM_MAP_ENTRY(pixel_format, JPEG),
+};
+
+STATIC MP_DEFINE_CONST_DICT(esp32_camera_pixel_format_locals_dict, esp32_camera_pixel_format_locals_table);
+MAKE_PRINTER(esp32_camera, esp32_camera_pixel_format);
+MAKE_ENUM_TYPE(esp32_camera, PixelFormat, esp32_camera_pixel_format);
+
+pixformat_t validate_pixel_format(mp_obj_t obj, qstr arg_name) {
+    return cp_enum_value(&esp32_camera_pixel_format_type, mp_arg_validate_type(obj, &esp32_camera_pixel_format_type, arg_name));
+}
+
+//| class FrameSize:
+//|     """The pixel size of the captured frames"""
+//|
+//|     R96X96: FrameSize
+//|     """96x96"""
+//|
+//|     QQVGA: FrameSize
+//|     """160x120"""
+//|
+//|     QCIF: FrameSize
+//|     """176x144"""
+//|
+//|     HQVGA: FrameSize
+//|     """240x176"""
+//|
+//|     R240X240: FrameSize
+//|     """240x240"""
+//|
+//|     QVGA: FrameSize
+//|     """320x240 """
+//|
+//|     CIF: FrameSize
+//|     """400x296"""
+//|
+//|     HVGA: FrameSize
+//|     """480x320"""
+//|
+//|     VGA: FrameSize
+//|     """640x480"""
+//|
+//|     SVGA: FrameSize
+//|     """800x600"""
+//|
+//|     XGA: FrameSize
+//|     """1024x768"""
+//|
+//|     HD: FrameSize
+//|     """1280x720"""
+//|
+//|     SXGA: FrameSize
+//|     """1280x1024"""
+//|
+//|     UXGA: FrameSize
+//|     """1600x1200"""
+//|
+//|     FHD: FrameSize
+//|     """1920x1080"""
+//|
+//|     P_HD: FrameSize
+//|     """ 720x1280"""
+//|
+//|     P_3MP: FrameSize
+//|     """ 864x1536"""
+//|
+//|     QXGA: FrameSize
+//|     """2048x1536"""
+//|
+//|     QHD: FrameSize
+//|     """2560x1440"""
+//|
+//|     WQXGA: FrameSize
+//|     """2560x1600"""
+//|
+//|     P_FHD: FrameSize
+//|     """1080x1920"""
+//|
+//|     QSXGA: FrameSize
+//|     """2560x1920"""
+//|
+
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, R96X96, FRAMESIZE_96X96);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, R240X240, FRAMESIZE_240X240);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, QQVGA, FRAMESIZE_QQVGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, QCIF, FRAMESIZE_QCIF);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, HQVGA, FRAMESIZE_HQVGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, QVGA, FRAMESIZE_QVGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, CIF, FRAMESIZE_CIF);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, HVGA, FRAMESIZE_HVGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, VGA, FRAMESIZE_VGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, SVGA, FRAMESIZE_SVGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, XGA, FRAMESIZE_XGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, HD, FRAMESIZE_HD);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, SXGA, FRAMESIZE_SXGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, UXGA, FRAMESIZE_UXGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, FHD, FRAMESIZE_FHD);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, P_HD, FRAMESIZE_P_HD);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, P_3MP, FRAMESIZE_P_3MP);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, QXGA, FRAMESIZE_QXGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, QHD, FRAMESIZE_QHD);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, WQXGA, FRAMESIZE_WQXGA);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, P_FHD, FRAMESIZE_P_FHD);
+MAKE_ENUM_VALUE(esp32_camera_frame_size_type, frame_size, QSXGA, FRAMESIZE_QSXGA);
+MAKE_ENUM_MAP(esp32_camera_frame_size) {
+    MAKE_ENUM_MAP_ENTRY(frame_size, R96X96),
+    MAKE_ENUM_MAP_ENTRY(frame_size, R240X240),
+    MAKE_ENUM_MAP_ENTRY(frame_size, QQVGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, QCIF),
+    MAKE_ENUM_MAP_ENTRY(frame_size, HQVGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, QVGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, CIF),
+    MAKE_ENUM_MAP_ENTRY(frame_size, HVGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, VGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, SVGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, XGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, HD),
+    MAKE_ENUM_MAP_ENTRY(frame_size, SXGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, UXGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, FHD),
+    MAKE_ENUM_MAP_ENTRY(frame_size, P_HD),
+    MAKE_ENUM_MAP_ENTRY(frame_size, P_3MP),
+    MAKE_ENUM_MAP_ENTRY(frame_size, QXGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, QHD),
+    MAKE_ENUM_MAP_ENTRY(frame_size, WQXGA),
+    MAKE_ENUM_MAP_ENTRY(frame_size, P_FHD),
+    MAKE_ENUM_MAP_ENTRY(frame_size, QSXGA),
+};
+
+STATIC MP_DEFINE_CONST_DICT(esp32_camera_frame_size_locals_dict, esp32_camera_frame_size_locals_table);
+MAKE_PRINTER(esp32_camera, esp32_camera_frame_size);
+MAKE_ENUM_TYPE(esp32_camera, FrameSize, esp32_camera_frame_size);
+
+framesize_t validate_frame_size(mp_obj_t obj, qstr arg_name) {
+    return cp_enum_value(&esp32_camera_frame_size_type, mp_arg_validate_type(obj, &esp32_camera_frame_size_type, arg_name));
+}
+
+//| class GainCeiling:
+//|     """The maximum amount of gain applied to raw sensor data.
+//|
+//|     Higher values are useful in darker conditions, but increase image noise."""
+//|
+//|     GAIN_2X: GainCeiling
+//|     GAIN_4X: GainCeiling
+//|     GAIN_8X: GainCeiling
+//|     GAIN_16X: GainCeiling
+//|     GAIN_32X: GainCeiling
+//|     GAIN_64X: GainCeiling
+//|     GAIN_128X: GainCeiling
+//|
+
+MAKE_ENUM_VALUE(esp32_camera_gain_ceiling_type, gain_ceiling, GAIN_2X, GAINCEILING_2X);
+MAKE_ENUM_VALUE(esp32_camera_gain_ceiling_type, gain_ceiling, GAIN_4X, GAINCEILING_4X);
+MAKE_ENUM_VALUE(esp32_camera_gain_ceiling_type, gain_ceiling, GAIN_8X, GAINCEILING_8X);
+MAKE_ENUM_VALUE(esp32_camera_gain_ceiling_type, gain_ceiling, GAIN_16X, GAINCEILING_16X);
+MAKE_ENUM_VALUE(esp32_camera_gain_ceiling_type, gain_ceiling, GAIN_32X, GAINCEILING_32X);
+MAKE_ENUM_VALUE(esp32_camera_gain_ceiling_type, gain_ceiling, GAIN_64X, GAINCEILING_64X);
+MAKE_ENUM_VALUE(esp32_camera_gain_ceiling_type, gain_ceiling, GAIN_128X, GAINCEILING_128X);
+
+MAKE_ENUM_MAP(esp32_camera_gain_ceiling) {
+    MAKE_ENUM_MAP_ENTRY(gain_ceiling, GAIN_2X),
+    MAKE_ENUM_MAP_ENTRY(gain_ceiling, GAIN_4X),
+    MAKE_ENUM_MAP_ENTRY(gain_ceiling, GAIN_8X),
+    MAKE_ENUM_MAP_ENTRY(gain_ceiling, GAIN_16X),
+    MAKE_ENUM_MAP_ENTRY(gain_ceiling, GAIN_32X),
+    MAKE_ENUM_MAP_ENTRY(gain_ceiling, GAIN_64X),
+    MAKE_ENUM_MAP_ENTRY(gain_ceiling, GAIN_128X)
+};
+
+STATIC MP_DEFINE_CONST_DICT(esp32_camera_gain_ceiling_locals_dict, esp32_camera_gain_ceiling_locals_table);
+MAKE_PRINTER(esp32_camera, esp32_camera_gain_ceiling);
+MAKE_ENUM_TYPE(esp32_camera, GainCeiling, esp32_camera_gain_ceiling);
+
+gainceiling_t validate_gain_ceiling(mp_obj_t obj, qstr arg_name) {
+    return cp_enum_value(&esp32_camera_gain_ceiling_type, mp_arg_validate_type(obj, &esp32_camera_gain_ceiling_type, arg_name));
+}
+
+STATIC const mp_rom_map_elem_t esp32_camera_module_globals_table[] = {
+    { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_esp32_camera) },
+    { MP_ROM_QSTR(MP_QSTR_Camera), MP_ROM_PTR(&esp32_camera_camera_type), },
+    { MP_ROM_QSTR(MP_QSTR_FrameSize), &esp32_camera_frame_size_type },
+    { MP_ROM_QSTR(MP_QSTR_GainCeiling), &esp32_camera_gain_ceiling_type },
+    { MP_ROM_QSTR(MP_QSTR_GrabMode), &esp32_camera_grab_mode_type },
+    { MP_ROM_QSTR(MP_QSTR_PixelFormat), &esp32_camera_pixel_format_type },
+};
+
+STATIC MP_DEFINE_CONST_DICT(esp32_camera_module_globals, esp32_camera_module_globals_table);
+
+const mp_obj_module_t esp32_camera_module = {
+    .base = { &mp_type_module },
+    .globals = (mp_obj_dict_t *)&esp32_camera_module_globals,
+};
+
+MP_REGISTER_MODULE(MP_QSTR_esp32_camera, esp32_camera_module, CIRCUITPY_ESP32_CAMERA);

ports/espressif/bindings/esp32_camera/__init__.h

@@ -0,0 +1,45 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Jeff Epler for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#pragma once
+
+#include "py/enum.h"
+#include "py/obj.h"
+
+#include "esp_camera.h"
+
+extern const mp_obj_type_t esp32_camera_grab_mode_type;
+extern const cp_enum_obj_t grab_mode_WHEN_EMPTY_obj;
+extern const mp_obj_type_t esp32_camera_pixel_format_type;
+extern const cp_enum_obj_t pixel_format_RGB565_obj;
+extern const mp_obj_type_t esp32_camera_frame_size_type;
+extern const cp_enum_obj_t frame_size_QQVGA_obj;
+extern const mp_obj_type_t esp32_camera_gain_ceiling_type;
+
+extern camera_grab_mode_t validate_grab_mode(mp_obj_t obj, qstr arg_name);
+extern pixformat_t validate_pixel_format(mp_obj_t obj, qstr arg_name);
+extern framesize_t validate_frame_size(mp_obj_t obj, qstr arg_name);
+extern gainceiling_t validate_gain_ceiling(mp_obj_t obj, qstr arg_name);

ports/espressif/boards/adafruit_esp32s2_camera/board.c

@@ -89,8 +89,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO38,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/adafruit_feather_esp32s2_tft/board.c

@@ -95,7 +95,7 @@ void board_init(void) {
     display->base.type = &displayio_display_type;
 
     // workaround as board_init() is called before reset_port() in main.c
-    pwmout_reset();
+///    pwmout_reset();
 
     common_hal_displayio_display_construct(
         display,
@@ -118,8 +118,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh
@@ -128,8 +127,6 @@ void board_init(void) {
         false,          // SH1107_addressing
         50000           // backlight pwm frequency
         );
-
-    common_hal_never_reset_pin(&pin_GPIO45); // backlight pin
 }
 
 bool board_requests_safe_mode(void) {
@@ -144,6 +141,18 @@ bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
         gpio_set_level(21, true);
         return true;
     }
+    // Pull LED down on reset rather than the default up
+    if (pin_number == 13) {
+        gpio_config_t cfg = {
+            .pin_bit_mask = BIT64(pin_number),
+            .mode = GPIO_MODE_DISABLE,
+            .pull_up_en = false,
+            .pull_down_en = true,
+            .intr_type = GPIO_INTR_DISABLE,
+        };
+        gpio_config(&cfg);
+        return true;
+    }
     return false;
 }
 

ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/board.c

@@ -94,8 +94,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO7,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.mk

@@ -17,3 +17,4 @@ CIRCUITPY_ESP_FLASH_FREQ = 40m
 CIRCUITPY_ESP_FLASH_SIZE = 4MB
 
 OPTIMIZATION_FLAGS = -Os
+CIRCUITPY_ESP32_CAMERA = 0

ports/espressif/boards/adafruit_feather_esp32s3_tft/board.c

@@ -118,8 +118,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/adafruit_feather_esp32s3_tft/mpconfigboard.mk

@@ -18,3 +18,4 @@ CIRCUITPY_ESP_FLASH_FREQ = 40m
 CIRCUITPY_ESP_FLASH_SIZE = 4MB
 
 OPTIMIZATION_FLAGS = -Os
+CIRCUITPY_ESP32_CAMERA = 0

ports/espressif/boards/adafruit_funhouse/board.c

@@ -97,8 +97,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO21,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/adafruit_funhouse/mpconfigboard.mk

@@ -16,6 +16,8 @@ CIRCUITPY_ESP_FLASH_MODE = dio
 CIRCUITPY_ESP_FLASH_FREQ = 40m
 CIRCUITPY_ESP_FLASH_SIZE = 4MB
 
+CIRCUITPY_ESP32_CAMERA = 0
+
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_PortalBase
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_FakeRequests

ports/espressif/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.mk

@@ -16,6 +16,8 @@ CIRCUITPY_ESP_FLASH_MODE = dio
 CIRCUITPY_ESP_FLASH_FREQ = 40m
 CIRCUITPY_ESP_FLASH_SIZE = 4MB
 
+CIRCUITPY_ESP32_CAMERA = 0
+
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_PortalBase
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_FakeRequests

ports/espressif/boards/espressif_esp32_eye/board.c

@@ -0,0 +1,46 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "components/driver/include/driver/gpio.h"
+#include "components/hal/include/hal/gpio_hal.h"
+#include "common-hal/microcontroller/Pin.h"
+
+void board_init(void) {
+    reset_board();
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/espressif_esp32_eye/mpconfigboard.h

@@ -0,0 +1,39 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Dan Halbert for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Espressif ESP32-EYE"
+#define MICROPY_HW_MCU_NAME         "ESP32"
+
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO23, .sda = &pin_GPIO18}}
+
+// UART pins attached to the USB-serial converter chip
+#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
+#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)
+
+#define DEFAULT_RESERVED_PSRAM      (1048576)

ports/espressif/boards/espressif_esp32_eye/mpconfigboard.mk

@@ -0,0 +1,11 @@
+CIRCUITPY_CREATOR_ID =  0x000C303A
+CIRCUITPY_CREATION_ID = 0x00320001
+
+IDF_TARGET = esp32
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 40m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB

ports/espressif/boards/espressif_esp32_eye/pins.c

@@ -0,0 +1,40 @@
+#include "py/objtuple.h"
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_obj_tuple_t camera_data_tuple = {
+    {&mp_type_tuple},
+    8,
+    {
+        MP_ROM_PTR(&pin_GPIO34),
+        MP_ROM_PTR(&pin_GPIO13),
+        MP_ROM_PTR(&pin_GPIO14),
+        MP_ROM_PTR(&pin_GPIO35),
+        MP_ROM_PTR(&pin_GPIO39), // "S_VN"
+        MP_ROM_PTR(&pin_GPIO38),
+        MP_ROM_PTR(&pin_GPIO37),
+        MP_ROM_PTR(&pin_GPIO36), // "S_VP"
+    }
+};
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_I2S_SCK), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_WS), MP_ROM_PTR(&pin_GPIO32) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_SDO), MP_ROM_PTR(&pin_GPIO32) },
+
+    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED_RED), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_LED_WHITE), MP_ROM_PTR(&pin_GPIO22) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_DATA), MP_ROM_PTR(&camera_data_tuple) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_VSYNC), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_HREF), MP_ROM_PTR(&pin_GPIO27) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_PCLK), MP_ROM_PTR(&pin_GPIO25) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_XCLK), MP_ROM_PTR(&pin_GPIO4) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/espressif_esp32_eye/sdkconfig

@@ -0,0 +1,72 @@
+# Automatically generated file. DO NOT EDIT.
+# Espressif IoT Development Framework (ESP-IDF) Project Configuration
+#
+#
+# Component config
+#
+#
+# ESP32-specific
+#
+CONFIG_ESP32_SPIRAM_SUPPORT=y
+#
+# SPI RAM config
+#
+CONFIG_SPIRAM_TYPE_AUTO=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
+CONFIG_SPIRAM_SIZE=-1
+CONFIG_SPIRAM_SPEED_40M=y
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+CONFIG_SPIRAM_IGNORE_NOTFOUND=y
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
+CONFIG_SPIRAM_CACHE_WORKAROUND=y
+# CONFIG_SPIRAM_BANKSWITCH_ENABLE is not set
+# end of SPI RAM config
+
+# end of ESP32-specific
+
+#
+# NVS
+#
+# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
+# end of NVS
+
+#
+# Camera configuration
+#
+CONFIG_OV7670_SUPPORT=y
+CONFIG_OV7725_SUPPORT=y
+CONFIG_NT99141_SUPPORT=y
+CONFIG_OV2640_SUPPORT=y
+CONFIG_OV3660_SUPPORT=y
+CONFIG_OV5640_SUPPORT=y
+CONFIG_GC2145_SUPPORT=y
+CONFIG_GC032A_SUPPORT=y
+CONFIG_GC0308_SUPPORT=y
+CONFIG_BF3005_SUPPORT=y
+CONFIG_BF20A6_SUPPORT=y
+# CONFIG_SC101IOT_SUPPORT is not set
+CONFIG_SC030IOT_SUPPORT=y
+# CONFIG_SCCB_HARDWARE_I2C_PORT0 is not set
+CONFIG_SCCB_HARDWARE_I2C_PORT1=y
+CONFIG_SCCB_CLK_FREQ=100000
+# CONFIG_GC_SENSOR_WINDOWING_MODE is not set
+CONFIG_GC_SENSOR_SUBSAMPLE_MODE=y
+CONFIG_CAMERA_CORE0=y
+# CONFIG_CAMERA_CORE1 is not set
+# CONFIG_CAMERA_NO_AFFINITY is not set
+CONFIG_CAMERA_DMA_BUFFER_SIZE_MAX=32768
+# end of Camera configuration
+
+# end of Component config
+#
+CONFIG_ESP_CONSOLE_UART_TX_GPIO=1
+CONFIG_ESP_CONSOLE_UART_RX_GPIO=3
+

ports/espressif/boards/espressif_esp32s3_box/board.c

@@ -80,8 +80,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/espressif_esp32s3_box_lite/board.c

@@ -81,8 +81,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/espressif_esp32s3_eye/board.c

@@ -0,0 +1,137 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/displayio/FourWire.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+#include "shared-bindings/board/__init__.h"
+
+displayio_fourwire_obj_t board_display_obj;
+
+#define DELAY 0x80
+
+// display init sequence according to LilyGO example app
+uint8_t display_init_sequence[] = {
+    // sw reset
+    0x01, 0 | DELAY, 150,
+    // sleep out
+    0x11, 0 | DELAY, 255,
+    // normal display mode on
+    0x13, 0,
+    // display and color format settings
+    0x36, 1, 0x08,
+    0xB6, 2, 0x0A, 0x82,
+    0x3A, 1 | DELAY,  0x55, 10,
+    // ST7789V frame rate setting
+    0xB2, 5, 0x0C, 0x0C, 0x00, 0x33, 0x33,
+    // voltages: VGH / VGL
+    0xB7, 1, 0x35,
+    // ST7789V power setting
+    0xBB, 1, 0x28,
+    0xC0, 1, 0x0C,
+    0xC2, 2, 0x01, 0xFF,
+    0xC3, 1, 0x10,
+    0xC4, 1, 0x20,
+    0xC6, 1, 0x0F,
+    0xD0, 2, 0xA4, 0xA1,
+    // ST7789V gamma setting
+    0xE0, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x32, 0x44, 0x42, 0x06, 0x0E, 0x12, 0x14, 0x17,
+    0xE1, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x31, 0x54, 0x47, 0x0E, 0x1C, 0x17, 0x1B, 0x1E,
+    0x21, 0,
+    // display on
+    0x29, 0 | DELAY, 255,
+};
+
+void board_init(void) {
+    busio_spi_obj_t *spi = common_hal_board_create_spi(0);
+    displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus;
+    bus->base.type = &displayio_fourwire_type;
+
+    common_hal_displayio_fourwire_construct(
+        bus,
+        spi,
+        &pin_GPIO43,    // DC
+        &pin_GPIO44,    // CS
+        NULL,           // no reset pin
+        40000000,       // baudrate
+        0,              // polarity
+        0               // phase
+        );
+    displayio_display_obj_t *display = &displays[0].display;
+    display->base.type = &displayio_display_type;
+
+    // workaround as board_init() is called before reset_port() in main.c
+    pwmout_reset();
+
+    common_hal_displayio_display_construct(
+        display,
+        bus,
+        240,            // width (after rotation)
+        240,            // height (after rotation)
+        0,              // column start
+        0,              // row start
+        0,              // rotation
+        16,             // color depth
+        false,          // grayscale
+        false,          // pixels in a byte share a row. Only valid for depths < 8
+        1,              // bytes per cell. Only valid for depths < 8
+        false,          // reverse_pixels_in_byte. Only valid for depths < 8
+        true,           // reverse_pixels_in_word
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS,   // set row command
+        MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        &pin_GPIO48,    // backlight pin
+        NO_BRIGHTNESS_COMMAND,
+        1.0f,           // brightness
+        false,          // single_byte_bounds
+        false,          // data_as_commands
+        true,           // auto_refresh
+        60,             // native_frames_per_second
+        false,          // backlight_on_high
+        false,          // SH1107_addressing
+        50000           // backlight pwm frequency
+        );
+
+    common_hal_never_reset_pin(&pin_GPIO48); // backlight pin
+    // Debug UART
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/espressif_esp32s3_eye/mpconfigboard.h

@@ -0,0 +1,47 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "ESP32-S3-EYE"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+// Shared by the camera and accelerometer
+#define DEFAULT_I2C_BUS_SDA         (&pin_GPIO4)
+#define DEFAULT_I2C_BUS_SCL         (&pin_GPIO5)
+
+// This is the SD card connection, not the LCD
+#define DEFAULT_SPI_BUS_SCK         (&pin_GPIO39)
+#define DEFAULT_SPI_BUS_MISO        (&pin_GPIO40)
+#define DEFAULT_SPI_BUS_MOSI        (&pin_GPIO38)
+
+#define CIRCUITPY_BOARD_SPI         (2)
+#define CIRCUITPY_BOARD_SPI_PIN     { \
+        {.clock = &pin_GPIO21, .mosi = &pin_GPIO47, .miso = NULL}, \
+        {.clock = &pin_GPIO39, .mosi = &pin_GPIO40, .miso = &pin_GPIO38}, \
+}
+
+#define DEFAULT_RESERVED_PSRAM      (1048576)

ports/espressif/boards/espressif_esp32s3_eye/mpconfigboard.mk

@@ -0,0 +1,17 @@
+USB_VID = 0x303A
+USB_PID = 0x700F
+USB_PRODUCT = "ESP32-S3-EYE"
+USB_MANUFACTURER = "Espressif"
+
+IDF_TARGET = esp32s3
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 8MB

ports/espressif/boards/espressif_esp32s3_eye/pins.c

@@ -0,0 +1,56 @@
+#include "py/objtuple.h"
+#include "shared-bindings/board/__init__.h"
+#include "shared-module/displayio/__init__.h"
+
+STATIC const mp_rom_obj_tuple_t camera_data_tuple = {
+    {&mp_type_tuple},
+    8,
+    {
+        MP_ROM_PTR(&pin_GPIO11),
+        MP_ROM_PTR(&pin_GPIO9),
+        MP_ROM_PTR(&pin_GPIO8),
+        MP_ROM_PTR(&pin_GPIO10),
+        MP_ROM_PTR(&pin_GPIO12),
+        MP_ROM_PTR(&pin_GPIO18),
+        MP_ROM_PTR(&pin_GPIO17),
+        MP_ROM_PTR(&pin_GPIO16),
+    }
+};
+
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTONS), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_MIC_SDO), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) }, // LCD
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_DATA), MP_ROM_PTR(&camera_data_tuple) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_VSYNC), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_HREF), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_PCLK), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_CAMERA_XCLK), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO47) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO21) },
+
+    { MP_ROM_QSTR(MP_QSTR_MISO1), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI1), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_SCK1), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_MIC_SCK), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_MIC_WS), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_DC), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_BACKLIGHT), MP_ROM_PTR(&pin_GPIO48) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO48) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)},
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/espressif_esp32s3_eye/sdkconfig

@@ -0,0 +1,34 @@
+CONFIG_ESP32S3_SPIRAM_SUPPORT=y
+#
+# SPI RAM config
+#
+# CONFIG_SPIRAM_MODE_QUAD is not set
+CONFIG_SPIRAM_MODE_OCT=y
+# CONFIG_SPIRAM_TYPE_AUTO is not set
+CONFIG_SPIRAM_TYPE_ESPPSRAM64=y
+CONFIG_SPIRAM_SIZE=8388608
+# end of SPI RAM config
+
+CONFIG_DEFAULT_PSRAM_CLK_IO=30
+#
+# PSRAM Clock and CS IO for ESP32S3
+#
+CONFIG_DEFAULT_PSRAM_CS_IO=26
+# end of PSRAM Clock and CS IO for ESP32S3
+
+# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
+# CONFIG_SPIRAM_RODATA is not set
+CONFIG_SPIRAM_SPEED_80M=y
+# CONFIG_SPIRAM_SPEED_40M is not set
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3-eye"
+# end of LWIP

ports/espressif/boards/espressif_esp32s3_usb_otg_n8/board.c

@@ -108,8 +108,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO9,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/espressif_kaluga_1.3/mpconfigboard.h

@@ -30,3 +30,6 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO7)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/boards/espressif_kaluga_1.3/pins.c

@@ -140,5 +140,7 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S1_LRCK_DAC1), MP_ROM_PTR(&pin_GPIO17) },
     { MP_ROM_QSTR(MP_QSTR_AUDIO_I2S1_BCLK_DAC2), MP_ROM_PTR(&pin_GPIO18) },
 
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+
 };
 MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/hardkernel_odroid_go/board.c

@@ -100,8 +100,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO14,  // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f, // brightness (ignored)
+        1.0f, // brightness
-        true, // auto_brightness
         false, // single_byte_bounds
         false, // data_as_commands
         true, // auto_refresh

ports/espressif/boards/hexky_s2/board.c

@@ -112,8 +112,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO45,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/hiibot_iots2/board.c

@@ -117,8 +117,7 @@ static void display_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO38,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/lilygo_ttgo_t8_s2_st7789/board.c

@@ -117,8 +117,7 @@ static void display_init(void) {
         sizeof(display_init_sequence),
         &pin_GPIO33,    // backlight pin
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        false,          // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/mixgo_ce_serial/mpconfigboard.mk

@@ -16,6 +16,8 @@ CIRCUITPY_ESP_FLASH_MODE = dio
 CIRCUITPY_ESP_FLASH_FREQ = 40m
 CIRCUITPY_ESP_FLASH_SIZE = 4MB
 
+CIRCUITPY_ESP32_CAMERA = 0
+
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Requests
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
 FROZEN_MPY_DIRS += $(TOP)/frozen/mixgo_cp_lib/mixgoce_lib

ports/espressif/boards/mixgo_ce_udisk/mpconfigboard.mk

@@ -16,6 +16,8 @@ CIRCUITPY_ESP_FLASH_MODE = dio
 CIRCUITPY_ESP_FLASH_FREQ = 40m
 CIRCUITPY_ESP_FLASH_SIZE = 4MB
 
+CIRCUITPY_ESP32_CAMERA = 0
+
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Requests
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
 FROZEN_MPY_DIRS += $(TOP)/frozen/mixgo_cp_lib/mixgoce_lib

ports/espressif/boards/morpheans_morphesp-240/board.c

@@ -198,8 +198,7 @@ void board_init(void) {
         sizeof(display_init_sequence),
         NULL,           // There is no backlight pin, defined for now.
         NO_BRIGHTNESS_COMMAND,
-        1.0f,           // brightness (ignored)
+        1.0f,           // brightness
-        true,           // auto_brightness
         false,          // single_byte_bounds
         false,          // data_as_commands
         true,           // auto_refresh

ports/espressif/boards/smartbeedesigns_bee_motion_s3/board.c

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+void board_init(void) {
+    // Debug UART
+    #ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO43);
+    common_hal_never_reset_pin(&pin_GPIO44);
+    #endif /* DEBUG */
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/smartbeedesigns_bee_motion_s3/mpconfigboard.h

@@ -0,0 +1,41 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Bee-Motion-S3"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
+#define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO36)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO37)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO17)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO15)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO16)

ports/espressif/boards/smartbeedesigns_bee_motion_s3/mpconfigboard.mk

@@ -0,0 +1,20 @@
+USB_VID = 0x303A
+USB_PID = 0x8114
+USB_PRODUCT = "Bee-Motion-S3"
+USB_MANUFACTURER = "Smart Bee Designs"
+
+IDF_TARGET = esp32s3
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 8MB
+
+
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

ports/espressif/boards/smartbeedesigns_bee_motion_s3/pins.c

@@ -0,0 +1,102 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_A13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_A14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_A15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO17) },
+
+
+    { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_IO48), MP_ROM_PTR(&pin_GPIO48) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO34) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_D43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44)},
+    { MP_ROM_QSTR(MP_QSTR_D44), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_BOOT_BTN), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_VBAT), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_VBAT_SENSE), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_VBUS_SENSE), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_LIGHT_SENSOR), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_PIR), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_PIR_SENSOR), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_), MP_ROM_PTR(&pin_GPIO34) },
+
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/smartbeedesigns_bee_motion_s3/sdkconfig

@@ -0,0 +1,6 @@
+# CONFIG_ESP32S3_SPIRAM_SUPPORT is not set
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="smartbeedesigns_bee_motion_s3"
+# end of LWIP

ports/espressif/boards/smartbeedesigns_bee_s3/board.c

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+void board_init(void) {
+    // Debug UART
+    #ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO43);
+    common_hal_never_reset_pin(&pin_GPIO44);
+    #endif /* DEBUG */
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}