Reorganize sdkconfigs and release UF2s

.pre-commit-config.yaml

@@ -8,6 +8,6 @@ repos:
     hooks:
     -   id: check-yaml
     -   id: end-of-file-fixer
-        exclude: '^(tests/.*\.exp|tests/cmdline/.*|tests/.*/data/.*)'
+        exclude: '^(tests/.*\.exp|tests/cmdline/.*|tests/.*/data/.*|ports/esp32s2/esp-idf-config/.*|ports/esp32s2/boards/.*/sdkconfig)'
     -   id: trailing-whitespace
         exclude: '^(tests/.*\.exp|tests/cmdline/.*|tests/.*/data/.*)'

ports/esp32s2/Makefile

@@ -228,9 +228,17 @@ IDF_PATH = $(realpath ./esp-idf)
 $(BUILD)/esp-idf:
 	$(Q)$(MKDIR) -p $@
 
+FLASH_SDKCONFIG = esp-idf-config/sdkconfig-$(CIRCUITPY_ESP_FLASH_SIZE).defaults
+ifeq ($(DEBUG), 1)
+	DEBUG_SDKCONFIG = esp-idf-config/sdkconfig-debug.defaults
+else
+	DEBUG_SDKCONFIG = esp-idf-config/sdkconfig-opt.defaults
+endif
+SDKCONFIGS = esp-idf-config/sdkconfig.defaults;$(DEBUG_SDKCONFIG);$(FLASH_SDKCONFIG);boards/$(BOARD)/sdkconfig
+
 # create the config headers
 $(BUILD)/esp-idf/config/sdkconfig.h: boards/$(BOARD)/sdkconfig | $(BUILD)/esp-idf
-	IDF_PATH=$(IDF_PATH) cmake -S . -B $(BUILD)/esp-idf -DSDKCONFIG=$(BUILD)/esp-idf/sdkconfig -DSDKCONFIG_DEFAULTS="sdkconfig.defaults;sdkconfig-$(CIRCUITPY_ESP_FLASH_SIZE).defaults;boards/$(BOARD)/sdkconfig" -DCMAKE_TOOLCHAIN_FILE=$(IDF_PATH)/tools/cmake/toolchain-esp32s2.cmake -DIDF_TARGET=esp32s2 -GNinja
+	IDF_PATH=$(IDF_PATH) cmake -S . -B $(BUILD)/esp-idf -DSDKCONFIG=$(BUILD)/esp-idf/sdkconfig -DSDKCONFIG_DEFAULTS="$(SDKCONFIGS)" -DCMAKE_TOOLCHAIN_FILE=$(IDF_PATH)/tools/cmake/toolchain-esp32s2.cmake -DIDF_TARGET=esp32s2 -GNinja
 
 # build a lib
 # Adding -d explain -j 1 -v to the ninja line will output debug info
@@ -247,10 +255,12 @@ $(BUILD)/esp-idf/esp-idf/esp32s2/ld/esp32s2.project.ld: $(BUILD)/esp-idf/config/
 $(BUILD)/esp-idf/partition_table/partition-table.bin: $(BUILD)/esp-idf/config/sdkconfig.h
 	IDF_PATH=$(IDF_PATH) ninja -C $(BUILD)/esp-idf partition_table/partition-table.bin
 
-# run menuconfig
+# run menuconfig and then remove standard settings
 menuconfig: $(BUILD)/esp-idf/config
 	$(Q)ninja -C $(BUILD)/esp-idf menuconfig
-	$(Q)diff --old-line-format= --unchanged-line-format= sdkconfig.defaults $(BUILD)/esp-idf/sdkconfig > boards/$(BOARD)/sdkconfig || true
+	$(Q)diff --old-line-format= --unchanged-line-format= esp-idf-config/sdkconfig.defaults $(BUILD)/esp-idf/sdkconfig > $(BUILD)/sdkconfig.diff || true
+	$(Q)grep -Fvxf $(FLASH_SDKCONFIG) $(BUILD)/sdkconfig.diff > $(BUILD)/sdkconfig.stripped1
+	$(Q)grep -Fvxf $(DEBUG_SDKCONFIG) $(BUILD)/sdkconfig.stripped1 > boards/$(BOARD)/sdkconfig
 
 # qstr builds include headers so we need to make sure they are up to date
 $(HEADER_BUILD)/qstr.i.last: | $(BUILD)/esp-idf/config/sdkconfig.h
@@ -307,8 +317,6 @@ $(BUILD)/firmware.elf: $(OBJ) | esp-idf-stamp
 $(BUILD)/circuitpython-firmware.bin: $(BUILD)/firmware.elf
 	$(STEPECHO) "Create $@"
 	$(Q)esptool.py --chip esp32s2 elf2image $(FLASH_FLAGS) --elf-sha256-offset 0xb0 -o $@ $^
-#	$(Q)$(OBJCOPY) -O binary $^ $@
-#   $(Q)$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@
 
 $(BUILD)/firmware.bin: $(BUILD)/circuitpython-firmware.bin | esp-idf-stamp
 	$(Q)$(PYTHON) ../../tools/join_bins.py $@ 0x1000 $(BUILD)/esp-idf/bootloader/bootloader.bin 0x8000 $(BUILD)/esp-idf/partition_table/partition-table.bin 0x10000 $(BUILD)/circuitpython-firmware.bin

ports/esp32s2/boards/microdev_micro_s2/sdkconfig

@@ -16,10 +16,8 @@ CONFIG_DEFAULT_PSRAM_CLK_IO=30
 CONFIG_DEFAULT_PSRAM_CS_IO=26
 # end of PSRAM clock and cs IO for ESP32S2
 
-CONFIG_SPIRAM_SPIWP_SD3_PIN=28
 # CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
 # CONFIG_SPIRAM_RODATA is not set
-# CONFIG_SPIRAM_USE_AHB_DBUS3 is not set
 # CONFIG_SPIRAM_SPEED_80M is not set
 CONFIG_SPIRAM_SPEED_40M=y
 # CONFIG_SPIRAM_SPEED_26M is not set
@@ -33,3 +31,4 @@ CONFIG_SPIRAM_USE_MEMMAP=y
 CONFIG_SPIRAM_MEMTEST=y
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
 # end of SPI RAM config
+

ports/esp32s2/boards/unexpectedmaker_feathers2/sdkconfig

@@ -16,10 +16,8 @@ CONFIG_DEFAULT_PSRAM_CLK_IO=30
 CONFIG_DEFAULT_PSRAM_CS_IO=26
 # end of PSRAM clock and cs IO for ESP32S2
 
-CONFIG_SPIRAM_SPIWP_SD3_PIN=28
 # CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
 # CONFIG_SPIRAM_RODATA is not set
-# CONFIG_SPIRAM_USE_AHB_DBUS3 is not set
 # CONFIG_SPIRAM_SPEED_80M is not set
 CONFIG_SPIRAM_SPEED_40M=y
 # CONFIG_SPIRAM_SPEED_26M is not set
@@ -33,3 +31,4 @@ CONFIG_SPIRAM_USE_MEMMAP=y
 CONFIG_SPIRAM_MEMTEST=y
 # CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
 # end of SPI RAM config
+

ports/esp32s2/esp-idf-config/sdkconfig-16MB.defaults

@@ -1,10 +1,9 @@
-
+# No newlines in this file so they are preserved in the board sdkconfig.
 # CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
 CONFIG_ESPTOOLPY_FLASHSIZE="16MB"
-
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-16MB.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partitions-16MB.csv"
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="esp-idf-config/partitions-16MB.csv"
+CONFIG_PARTITION_TABLE_FILENAME="esp-idf-config/partitions-16MB.csv"

ports/esp32s2/esp-idf-config/sdkconfig-4MB.defaults

@@ -1,10 +1,9 @@
-
+# No newlines in this file so they are preserved in the board sdkconfig.
 # CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
 # CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
-
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-4MB.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partitions-4MB.csv"
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="esp-idf-config/partitions-4MB.csv"
+CONFIG_PARTITION_TABLE_FILENAME="esp-idf-config/partitions-4MB.csv"

ports/esp32s2/esp-idf-config/sdkconfig-8MB.defaults

@@ -1,10 +1,9 @@
-
+# No newlines in this file so they are preserved in the board sdkconfig.
 # CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
 # CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
 CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
-
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions-8MB.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partitions-8MB.csv"
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="esp-idf-config/partitions-8MB.csv"
+CONFIG_PARTITION_TABLE_FILENAME="esp-idf-config/partitions-8MB.csv"

ports/esp32s2/esp-idf-config/sdkconfig-debug.defaults

@@ -0,0 +1,13 @@
+# No newlines in this file so they are preserved in the board sdkconfig.
+CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
+CONFIG_ESP_CONSOLE_UART_DEFAULT=y
+# CONFIG_ESP_CONSOLE_USB_CDC is not set
+# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
+# CONFIG_ESP_CONSOLE_NONE is not set
+CONFIG_ESP_CONSOLE_UART=y
+CONFIG_ESP_CONSOLE_UART_NUM=0
+CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y
+# CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT is not set
+# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set

ports/esp32s2/esp-idf-config/sdkconfig-opt.defaults

@@ -0,0 +1,12 @@
+# No newlines in this file so they are preserved in the board sdkconfig.
+# CONFIG_ESP_ERR_TO_NAME_LOOKUP is not set
+# CONFIG_ESP_CONSOLE_UART_DEFAULT is not set
+# CONFIG_CONSOLE_UART_DEFAULT is not set
+CONFIG_ESP_CONSOLE_UART_NONE=y
+CONFIG_ESP_CONSOLE_NONE=y
+CONFIG_ESP_CONSOLE_UART_NUM=-1
+CONFIG_CONSOLE_UART_NUM=-1
+# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
+CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT=y
+# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
+CONFIG_ESP32S2_PANIC_SILENT_REBOOT=y

tools/build_board_info.py

@@ -42,7 +42,7 @@ extension_by_port = {
     "cxd56": SPK,
     "mimxrt10xx": HEX_UF2,
     "litex": DFU,
-    "esp32s2": BIN
+    "esp32s2": BIN_UF2
 }
 
 # Per board overrides