loc_ber_m4_base_board

.github/workflows/build.yml

@@ -195,6 +195,7 @@ jobs:
         - "itsybitsy_m4_express"
         - "itsybitsy_nrf52840_express"
         - "kicksat-sprite"
+        - "loc_ber_m4_base_board"
         - "makerdiary_nrf52840_mdk"
         - "makerdiary_nrf52840_mdk_usb_dongle"
         - "meowbit_v121"

ports/atmel-samd/boards/loc_ber_m4_base_board/board.c

@@ -0,0 +1,39 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+#include "mpconfigboard.h"
+#include "hal/include/hal_gpio.h"
+
+void board_init(void) {
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}

ports/atmel-samd/boards/loc_ber_m4_base_board/mpconfigboard.h

@@ -0,0 +1,32 @@
+#define MICROPY_HW_BOARD_NAME "LoC BeR M4 base board"
+#define MICROPY_HW_MCU_NAME "samd51g19"
+
+#define CIRCUITPY_MCU_FAMILY samd51
+
+// This is for Rev B
+#define MICROPY_HW_LED_STATUS   (&pin_PA22)
+
+#define MICROPY_HW_APA102_MOSI   (&pin_PB03)
+#define MICROPY_HW_APA102_SCK    (&pin_PB02)
+
+// These are pins not to reset.
+// QSPI Data pins
+#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11)
+// DotStar pins, QSPI CS, and QSPI SCK
+#define MICROPY_PORT_B (PORT_PB02 | PORT_PB03 | PORT_PB10 | PORT_PB11)
+#define MICROPY_PORT_C (0)
+#define MICROPY_PORT_D (0)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
+#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_PA01)
+#define DEFAULT_SPI_BUS_MOSI (&pin_PA00)
+#define DEFAULT_SPI_BUS_MISO (&pin_PB23)
+
+#define DEFAULT_UART_BUS_RX (&pin_PA16)
+#define DEFAULT_UART_BUS_TX (&pin_PA17)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1

ports/atmel-samd/boards/loc_ber_m4_base_board/mpconfigboard.mk

@@ -0,0 +1,17 @@
+USB_VID = 0x239A
+USB_PID = 0x802C
+USB_PRODUCT = "LoC BeR M4 base board"
+USB_MANUFACTURER = "Zoomax"
+
+CHIP_VARIANT = SAMD51G19A
+CHIP_FAMILY = samd51
+
+INTERNAL_FLASH_FILESYSTEM = 1
+CIRCUITPY_FULL_BUILD = 0
+
+LONGINT_IMPL = MPZ
+
+# No I2S on SAMD51G
+CIRCUITPY_AUDIOBUSIO = 0
+
+CIRCUITPY_BITBANG_APA102 = 1

ports/atmel-samd/boards/loc_ber_m4_base_board/pins.c

@@ -0,0 +1,49 @@
+#include "shared-bindings/board/__init__.h"
+
+// This mapping only includes functional names because pins broken
+// out on connectors are labeled with their MCU name available from
+// microcontroller.pin.
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A0),  MP_ROM_PTR(&pin_PA02) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A1),  MP_ROM_PTR(&pin_PA05) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A2),  MP_ROM_PTR(&pin_PB08) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A3),  MP_ROM_PTR(&pin_PB09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A4),  MP_ROM_PTR(&pin_PA04) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A5),  MP_ROM_PTR(&pin_PA06) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D0),  MP_ROM_PTR(&pin_PA16) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_RX),  MP_ROM_PTR(&pin_PA16) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D1),  MP_ROM_PTR(&pin_PA17) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TX),  MP_ROM_PTR(&pin_PA17) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D2),  MP_ROM_PTR(&pin_PA07) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D3),  MP_ROM_PTR(&pin_PB22) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D4),  MP_ROM_PTR(&pin_PA14) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D5),  MP_ROM_PTR(&pin_PA15) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D7),  MP_ROM_PTR(&pin_PA18) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D9),  MP_ROM_PTR(&pin_PA19) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D10),  MP_ROM_PTR(&pin_PA20) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D11),  MP_ROM_PTR(&pin_PA21) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D12),  MP_ROM_PTR(&pin_PA23) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA22) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA12) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA13) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA01) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA00) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB23) },
+
+    { MP_ROM_QSTR(MP_QSTR_APA102_MOSI), MP_ROM_PTR(&pin_PB03) },
+    { MP_ROM_QSTR(MP_QSTR_APA102_SCK), MP_ROM_PTR(&pin_PB02) },
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCK_2), MP_ROM_PTR(&pin_PB10) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI_2), MP_ROM_PTR(&pin_PA08) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MISO_2), MP_ROM_PTR(&pin_PA09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_CS_2), MP_ROM_PTR(&pin_PB11) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_WP_2), MP_ROM_PTR(&pin_PA10) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_HOLD_2), MP_ROM_PTR(&pin_PA11) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);