Update all target sdkconfig

ports/espressif/Makefile

@@ -77,6 +77,7 @@ INC += \
 	-isystem esp-idf/components/bt/host/nimble/port/include \
 	-isystem esp-idf/components/driver/include \
 	-isystem esp-idf/components/driver/deprecated \
+	-isystem esp-idf/components/driver/dac/include \
 	-isystem esp-idf/components/driver/gpio/include \
 	-isystem esp-idf/components/driver/i2c/include \
 	-isystem esp-idf/components/driver/i2s/include \

ports/espressif/boards/adafruit_feather_esp32_v2/board.c

@@ -27,7 +27,7 @@
 #include "supervisor/board.h"
 #include "mpconfigboard.h"
 #include "shared-bindings/microcontroller/Pin.h"
-#include "components/driver/include/driver/gpio.h"
+#include "components/driver/gpio/include/driver/gpio.h"
 #include "components/hal/include/hal/gpio_hal.h"
 #include "common-hal/microcontroller/Pin.h"
 

ports/espressif/boards/adafruit_qualia_s3_rgb666/sdkconfig

@@ -4,7 +4,6 @@
 #
 # Component config
 #
-
 #
 # LWIP
 #

ports/espressif/boards/espressif_esp32s3_lcd_ev/sdkconfig

@@ -1,41 +1,28 @@
-CONFIG_ESP32S3_SPIRAM_SUPPORT=y
 #
-# SPI RAM config
+# Espressif IoT Development Framework Configuration
 #
-# CONFIG_SPIRAM_MODE_QUAD is not set
+#
-CONFIG_SPIRAM_MODE_OCT=y
+# Component config
-CONFIG_SPIRAM_TYPE_AUTO=y
+#
-# end of SPI RAM config
+#
+# ESP System Settings
+#
+CONFIG_ESP_CONSOLE_UART_CUSTOM=y
+# CONFIG_ESP_CONSOLE_NONE is not set
+CONFIG_ESP_CONSOLE_UART=y
+CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_0=y
+CONFIG_ESP_CONSOLE_UART_NUM=0
+CONFIG_ESP_CONSOLE_UART_TX_GPIO=43
+CONFIG_ESP_CONSOLE_UART_RX_GPIO=44
+CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+# end of ESP System Settings
 
-CONFIG_DEFAULT_PSRAM_CLK_IO=30
-#
-# PSRAM Clock and CS IO for ESP32S3
-#
-CONFIG_DEFAULT_PSRAM_CS_IO=26
-# end of PSRAM Clock and CS IO for ESP32S3
-
-# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
-# CONFIG_SPIRAM_RODATA is not set
-CONFIG_SPIRAM_SPEED_80M=y
-# CONFIG_SPIRAM_SPEED_40M is not set
-CONFIG_SPIRAM=y
-CONFIG_SPIRAM_BOOT_INIT=y
-# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
-CONFIG_SPIRAM_USE_MEMMAP=y
-# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
-# CONFIG_SPIRAM_USE_MALLOC is not set
-CONFIG_SPIRAM_MEMTEST=y
 #
 # LWIP
 #
 CONFIG_LWIP_LOCAL_HOSTNAME="circuitpy"
 # end of LWIP
-#
+
-# CONFIG_ESP_CONSOLE_NONE is not set
+# end of Component config
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+
-CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_0=y
+# end of Espressif IoT Development Framework Configuration
-CONFIG_ESP_CONSOLE_UART_CUSTOM=y
-CONFIG_ESP_CONSOLE_UART_NUM=0
-CONFIG_ESP_CONSOLE_UART_RX_GPIO=44
-CONFIG_ESP_CONSOLE_UART_TX_GPIO=43
-CONFIG_ESP_CONSOLE_UART=y

ports/espressif/common-hal/alarm/SleepMemory.h

@@ -41,7 +41,11 @@
 // is set. Any memory not allocated by us can be used by the ESP-IDF for heap or other purposes.
 
 // Use half of RTC_SLOW_MEM or RTC_FAST_MEM.
-#define SLEEP_MEMORY_LENGTH (4096)
+#ifdef CONFIG_IDF_TARGET_ESP32
+#define SLEEP_MEMORY_LENGTH (3 * 1024)
+#else
+#define SLEEP_MEMORY_LENGTH (4 * 1024)
+#endif
 
 typedef struct {
     mp_obj_base_t base;

ports/espressif/common-hal/analogio/AnalogIn.c

@@ -103,7 +103,7 @@ uint16_t common_hal_analogio_analogin_get_value(analogio_analogin_obj_t *self) {
 
     adc_cali_scheme_ver_t supported_schemes;
     adc_cali_check_scheme(&supported_schemes);
-    adc_cali_scheme_ver_t calibration_scheme;
+    adc_cali_scheme_ver_t calibration_scheme = 0;
     adc_cali_handle_t calibration;
 
     #if defined(ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED) && ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED
@@ -124,7 +124,7 @@ uint16_t common_hal_analogio_analogin_get_value(analogio_analogin_obj_t *self) {
             .atten = ATTENUATION,
             .bitwidth = DATA_WIDTH,
             #ifdef CONFIG_IDF_TARGET_ESP32
-            .default_vref = DEFAULT_VREF;
+            .default_vref = DEFAULT_VREF,
             #endif
         };
         if (adc_cali_create_scheme_line_fitting(&config, &calibration) == ESP_OK) {

ports/espressif/common-hal/analogio/AnalogOut.c

@@ -35,63 +35,69 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "supervisor/shared/translate/translate.h"
 
-#if defined(CONFIG_IDF_TARGET_ESP32) || defined(CONFIG_IDF_TARGET_ESP32S2)
+#ifdef SOC_DAC_SUPPORTED
-#include "components/driver/include/driver/dac_common.h"
+#include "driver/dac_oneshot.h"
-#define HAS_DAC 1
+
 #if defined(CONFIG_IDF_TARGET_ESP32)
-#define pin_CHANNEL_1 pin_GPIO25
+#define pin_CHANNEL_0 pin_GPIO25
-#define pin_CHANNEL_2 pin_GPIO26
+#define pin_CHANNEL_1 pin_GPIO26
 #elif defined(CONFIG_IDF_TARGET_ESP32S2)
-#define pin_CHANNEL_1 pin_GPIO17
+#define pin_CHANNEL_0 pin_GPIO17
-#define pin_CHANNEL_2 pin_GPIO18
+#define pin_CHANNEL_1 pin_GPIO18
 #endif
-#else
+static dac_oneshot_handle_t _active_handles[SOC_DAC_CHAN_NUM];
-#define HAS_DAC 0
 #endif
 
+
 void common_hal_analogio_analogout_construct(analogio_analogout_obj_t *self,
     const mcu_pin_obj_t *pin) {
-    #if HAS_DAC
+    #ifdef SOC_DAC_SUPPORTED
-    if (pin == &pin_CHANNEL_1) {
+    if (pin == &pin_CHANNEL_0) {
-        self->channel = DAC_CHANNEL_1;
+        self->channel = DAC_CHAN_0;
-    } else if (pin == &pin_CHANNEL_2) {
+    } else if (pin == &pin_CHANNEL_1) {
-        self->channel = DAC_CHANNEL_2;
+        self->channel = DAC_CHAN_1;
     } else {
         raise_ValueError_invalid_pin();
     }
-    dac_output_enable(self->channel);
+    dac_oneshot_config_t config = {
+        .chan_id = self->channel
+    };
+    dac_oneshot_new_channel(&config, &self->handle);
+    _active_handles[self->channel] = self->handle;
     #else
     mp_raise_NotImplementedError(NULL);
     #endif
 }
 
 bool common_hal_analogio_analogout_deinited(analogio_analogout_obj_t *self) {
-    #if HAS_DAC
+    #ifdef SOC_DAC_SUPPORTED
-    return self->channel == DAC_CHANNEL_MAX;
+    return self->handle == NULL;
     #else
     return false;
     #endif
 }
 
 void common_hal_analogio_analogout_deinit(analogio_analogout_obj_t *self) {
-    #if HAS_DAC
+    #ifdef SOC_DAC_SUPPORTED
-    dac_output_disable(self->channel);
+    dac_oneshot_del_channel(self->handle);
-    self->channel = DAC_CHANNEL_MAX;
+    self->handle = NULL;
+    _active_handles[self->channel] = NULL;
     #endif
 }
 
 void common_hal_analogio_analogout_set_value(analogio_analogout_obj_t *self,
     uint16_t value) {
-    #if HAS_DAC
+    #ifdef SOC_DAC_SUPPORTED
     uint8_t dac_value = (value * 255) / 65535;
-    dac_output_enable(self->channel);
+    dac_oneshot_output_voltage(self->handle, dac_value);
-    dac_output_voltage(self->channel, dac_value);
     #endif
 }
 
 void analogout_reset(void) {
-    #if HAS_DAC
+    #ifdef SOC_DAC_SUPPORTED
-    dac_output_disable(DAC_CHANNEL_1);
+    for (uint8_t c = 0; c < SOC_DAC_CHAN_NUM; c++) {
-    dac_output_disable(DAC_CHANNEL_2);
+        dac_oneshot_del_channel(_active_handles[c]);
+        _active_handles[c] = NULL;
+    }
     #endif
 }

ports/espressif/common-hal/analogio/AnalogOut.h

@@ -30,12 +30,17 @@
 
 #include "common-hal/microcontroller/Pin.h"
 
+#ifdef SOC_DAC_SUPPORTED
+#include "esp-idf/components/driver/dac/include/driver/dac_oneshot.h"
+#endif
 #include "py/obj.h"
 
 typedef struct {
     mp_obj_base_t base;
-    const mcu_pin_obj_t *pin;
+    #ifdef SOC_DAC_SUPPORTED
+    dac_oneshot_handle_t handle;
     uint8_t channel;
+    #endif
 } analogio_analogout_obj_t;
 
 void analogout_reset(void);

ports/espressif/common-hal/canio/Listener.c

@@ -39,7 +39,7 @@
 
 #include "hal/twai_ll.h"
 
-#if SOC_TWAI_CONTROLLER_NUM > 1 || !defined(TWAI)
+#if !defined(TWAI) && defined(TWAI0)
 #define TWAI TWAI0
 #endif
 

ports/espressif/esp-idf-config/sdkconfig-debug.defaults

@@ -1,95 +1,21 @@
 #
-# Bootloader config
+# Espressif IoT Development Framework Configuration
 #
-CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
-CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
-# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
-# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
-# end of Bootloader config
-
-# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
 #
 # Compiler options
 #
 CONFIG_COMPILER_OPTIMIZATION_SIZE=y
-# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
-# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
-# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
 # end of Compiler options
 
-CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
+#
+# Component config
+#
 #
 # ESP System Settings
 #
 CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y
-# CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT is not set
-# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
-# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
 # end of ESP System Settings
 
-CONFIG_ESP_CONSOLE_UART_DEFAULT=y
+# end of Component config
-# CONFIG_ESP_CONSOLE_USB_CDC is not set
-# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_NONE is not set
-CONFIG_ESP_CONSOLE_UART=y
-CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
-CONFIG_ESP_CONSOLE_UART_NUM=0
-CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
-#
-# FreeRTOS
-#
-CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
-CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
-# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
-# CONFIG_FREERTOS_ASSERT_DISABLE is not set
-CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
-CONFIG_FREERTOS_DEBUG_OCDAWARE=y
-# end of FreeRTOS
 
-CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
+# end of Espressif IoT Development Framework Configuration
-#
-# Hardware Abstraction Layer (HAL) and Low Level (LL)
-#
-# CONFIG_HAL_ASSERTION_DISABLE is not set
-# CONFIG_HAL_ASSERTION_SILENT is not set
-# CONFIG_HAL_ASSERTION_ENABLE is not set
-CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
-# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
-
-#
-# Log output
-#
-# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
-# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
-# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
-CONFIG_LOG_DEFAULT_LEVEL_INFO=y
-# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
-# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
-# end of Log output
-
-CONFIG_LWIP_ESP_LWIP_ASSERT=y
-#
-# Deprecated options for backward compatibility
-#
-CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
-# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
-CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
-# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
-# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
-CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
-CONFIG_CONSOLE_UART_DEFAULT=y
-# CONFIG_CONSOLE_UART_CUSTOM is not set
-# CONFIG_ESP_CONSOLE_UART_NONE is not set
-CONFIG_CONSOLE_UART_NUM=0
-CONFIG_CONSOLE_UART_BAUDRATE=115200
-# end of Deprecated options for backward compatibility

ports/espressif/esp-idf-config/sdkconfig-esp32.defaults

@@ -51,8 +51,6 @@ CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
 #
 # Wi-Fi
 #
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
 # CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
 # end of Wi-Fi
 

ports/espressif/esp-idf-config/sdkconfig-esp32c3.defaults

@@ -17,8 +17,8 @@ CONFIG_BT_NIMBLE_NVS_PERSIST=y
 #
 # Memory Settings
 #
-CONFIG_BT_NIMBLE_ACL_BUF_COUNT=20
+CONFIG_BT_NIMBLE_TRANSPORT_ACL_FROM_LL_COUNT=20
-CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
+CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=70
 # end of Memory Settings
 
 CONFIG_BT_NIMBLE_EXT_ADV=y
@@ -52,10 +52,7 @@ CONFIG_I2S_SUPPRESS_DEPRECATE_WARN=y
 #
 # Wi-Fi
 #
-CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=4
+CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=4
-CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=8
-CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=16
-# CONFIG_ESP32_WIFI_NVS_ENABLED is not set
 # end of Wi-Fi
 
 #

ports/espressif/esp-idf-config/sdkconfig-esp32s2.defaults

@@ -49,12 +49,9 @@ CONFIG_ESP32S2_RTCDATA_IN_FAST_MEM=y
 #
 # Wi-Fi
 #
-CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=4
+CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=4
-CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=8
+CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
+CONFIG_ESP_WIFI_RX_BA_WIN=4
-CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=8
-CONFIG_ESP32_WIFI_RX_BA_WIN=4
-# CONFIG_ESP32_WIFI_NVS_ENABLED is not set
 # end of Wi-Fi
 
 #

ports/espressif/esp-idf-config/sdkconfig-esp32s3.defaults

@@ -18,8 +18,8 @@ CONFIG_BT_NIMBLE_NVS_PERSIST=y
 #
 # Memory Settings
 #
-CONFIG_BT_NIMBLE_ACL_BUF_COUNT=20
+CONFIG_BT_NIMBLE_TRANSPORT_ACL_FROM_LL_COUNT=20
-CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
+CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=70
 # end of Memory Settings
 
 CONFIG_BT_NIMBLE_EXT_ADV=y
@@ -79,11 +79,8 @@ CONFIG_ESP_IPC_TASK_STACK_SIZE=1536
 #
 # Wi-Fi
 #
-CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=4
+CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=4
-CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=8
+CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=16
-# CONFIG_ESP32_WIFI_NVS_ENABLED is not set
 # end of Wi-Fi
 
 #

ports/espressif/esp-idf-config/sdkconfig-flash-40m.defaults

@@ -1,10 +1,14 @@
 # CONFIG_ESPTOOLPY_FLASHFREQ_120M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
+# CONFIG_ESPTOOLPY_FLASHFREQ_64M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_60M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_48M is not set
 CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
+# CONFIG_ESPTOOLPY_FLASHFREQ_32M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_30M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_24M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
+# CONFIG_ESPTOOLPY_FLASHFREQ_16M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_15M is not set
+# CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT is not set

ports/espressif/esp-idf-config/sdkconfig-psram.defaults

@@ -16,6 +16,12 @@ CONFIG_SPIRAM_USE_MEMMAP=y
 
 # end of ESP PSRAM
 
+#
+# Wi-Fi
+#
+CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=16
+# end of Wi-Fi
+
 # end of Component config
 
 # end of Espressif IoT Development Framework Configuration

ports/espressif/esp-idf-config/sdkconfig.defaults

@@ -45,7 +45,7 @@ CONFIG_ESP_MAIN_TASK_STACK_SIZE=16384
 # Wi-Fi
 #
 CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=8
-CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=16
+CONFIG_ESP_WIFI_STATIC_TX_BUFFER=y
 # CONFIG_ESP_WIFI_NVS_ENABLED is not set
 # end of Wi-Fi
 
@@ -132,4 +132,5 @@ CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=4096
 
 # end of Component config
 
+CONFIG_IDF_EXPERIMENTAL_FEATURES=y
 # end of Espressif IoT Development Framework Configuration

ports/espressif/tools/update_sdkconfig.py

@@ -164,6 +164,7 @@ def update(debug, board, update_all):
     board_make = pathlib.Path(f"boards/{board}/mpconfigboard.mk")
     psram_size = "0"
     uf2_bootloader = None
+    ble_enabled = None
     for line in board_make.read_text().split("\n"):
         if "=" not in line or line.startswith("#"):
             continue
@@ -174,6 +175,11 @@ def update(debug, board, update_all):
             target = value
             if uf2_bootloader is None:
                 uf2_bootloader = target not in ("esp32", "esp32c3", "esp32c6", "esp32h2")
+            if ble_enabled is None:
+                ble_enabled = target not in (
+                    "esp32",
+                    "esp32s2",
+                )  # ESP32 is disabled by us. S2 doesn't support it.
         elif key == "CIRCUITPY_ESP_FLASH_SIZE":
             flash_size = value
         elif key == "CIRCUITPY_ESP_FLASH_MODE":
@@ -188,6 +194,8 @@ def update(debug, board, update_all):
             psram_freq = value
         elif key == "UF2_BOOTLOADER":
             uf2_bootloader = not (value == "0")
+        elif key == "CIRCUITPY_BLEIO":
+            ble_enabled = not (value == "0")
 
     os.environ["IDF_TARGET"] = target
     os.environ[
@@ -232,6 +240,7 @@ def update(debug, board, update_all):
         sdkconfigs.extend((psram_config, psram_size_config, psram_mode_config, psram_freq_config))
     target_config = pathlib.Path(f"esp-idf-config/sdkconfig-{target}.defaults")
     sdkconfigs.append(target_config)
+    if ble_enabled:
         ble_config = pathlib.Path(f"esp-idf-config/sdkconfig-ble.defaults")
         sdkconfigs.append(ble_config)
     board_config = pathlib.Path(f"boards/{board}/sdkconfig")
@@ -349,15 +358,29 @@ def update(debug, board, update_all):
                         first = False
                     target_kconfig_snippets.add(loc)
                     target_symbols = target_symbols.union(differing_keys)
+
+            # kconfig settings can be set by others. item.referenced doesn't
+            # know this. So we collect all things that reference this using
+            # rev_dep.
+            all_references = set(item.referenced)
+            to_unpack = [item.rev_dep]
+            while to_unpack:
+                rdep = to_unpack.pop()
+                if isinstance(rdep, tuple):
+                    to_unpack.extend(rdep)
+                elif isinstance(rdep, int):
+                    # skip logic
+                    pass
+                else:
+                    all_references.add(rdep)
+                    all_references.update(rdep.referenced)
             psram_reference = False
-            for referenced in item.referenced:
+            for referenced in all_references:
                 if referenced.name.startswith("IDF_TARGET"):
                     target_reference = True
-                    break
                 if referenced.name in target_symbols:
                     # Implicit target symbols
                     target_reference = True
-                    break
                 if referenced.name == "SPIRAM":
                     psram_reference = True
 

tools/ci_check_duplicate_usb_vid_pid.py

@@ -95,7 +95,9 @@ def check_vid_pid(files, clusterlist):
     if duplicates are found, and lists the duplicates.
     """
 
-    usb_pattern = re.compile(r"^CIRCUITPY_USB\s*=\s*0$|^IDF_TARGET = (esp32|esp32c3)$", flags=re.M)
+    usb_pattern = re.compile(
+        r"^CIRCUITPY_USB\s*=\s*0$|^IDF_TARGET = (esp32|esp32c3|esp32c6|esp32h2)$", flags=re.M
+    )
 
     usb_ids = defaultdict(set)
     for board_config in files: