Merge branch 'adafruit:main' into main

lib/tinyusb

@@ -1 +1 @@
-Subproject commit f1e006d09bd32088ab421d0b519eb89c531eda4e
+Subproject commit 6c7c9f2ef5a80d5a6879e9c3558162188c6cf889

locale/ID.po

@@ -129,8 +129,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -185,6 +187,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q harus <= %d"
 
@@ -786,10 +789,6 @@ msgstr "Tidak dapat menentukan RTS atau CTS dalam mode RS485"
 msgid "Cannot subclass slice"
 msgstr "Tidak dapat membuat subkelas dari irisan"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1100,13 +1099,10 @@ msgstr "Grup sudah digunakan"
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Perangkat keras sibuk, coba pin alternatif"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Perangkat keras sedang digunakan, coba pin alternatif"
 
@@ -1367,14 +1363,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Tidak menemukan Pin MISO atau MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1448,6 +1436,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Tidak pin %q"
 
@@ -1481,36 +1477,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Tidak ada Pin MISO"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Tidak ada Pin MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Tidak pin RX"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Tidak ada pin TX"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Tidak ada clocks yang tersedia"
@@ -2433,6 +2399,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3656,11 +3623,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr "tidak ada modul yang bernama '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4387,6 +4349,24 @@ msgstr "zi harus berjenis float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "Zi harus berbentuk (n_section, 2)"
 
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Perangkat keras sibuk, coba pin alternatif"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Tidak menemukan Pin MISO atau MOSI"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Tidak ada Pin MISO"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Tidak ada Pin MOSI"
+
+#~ msgid "No RX pin"
+#~ msgstr "Tidak pin RX"
+
+#~ msgid "No TX pin"
+#~ msgstr "Tidak ada pin TX"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "Kecerahan harus di antara 0-1.0"
 

locale/circuitpython.pot

@@ -126,8 +126,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -182,6 +184,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -779,10 +782,6 @@ msgstr ""
 msgid "Cannot subclass slice"
 msgstr ""
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1090,13 +1089,10 @@ msgstr ""
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr ""
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -1355,14 +1351,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1436,6 +1424,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr ""
 
@@ -1469,36 +1465,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr ""
@@ -2405,6 +2371,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3628,11 +3595,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""

locale/cs.po

@@ -130,8 +130,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -186,6 +188,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q musí být 1, pokud %q je True"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q musí být <= %d"
 
@@ -786,10 +789,6 @@ msgstr "Nelze určit RTS nebo CTS v režimu RS485"
 msgid "Cannot subclass slice"
 msgstr "Nelze použít řez podtřídy"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Nelze měnit frekvenci časovače, který je již používán"
@@ -1100,13 +1099,10 @@ msgstr "Skupina již byla použita"
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Hardware je zaneprázdněn, zkuste alternativní piny"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hardware je používán, zkuste alternativní piny"
 
@@ -1367,14 +1363,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Chybí pin MISO nebo MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "Chybějící MISO nebo MOSI pin"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1448,6 +1436,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Žádný %q pin"
 
@@ -1481,36 +1477,6 @@ msgstr "Žádné I2C zařízení na adrese: 0x%x"
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Žádný pin MISO"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "Žádný MISO pin"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Žádný pin MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "Žádný MOSI pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Žádný RX pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Žádný TX pin"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Žádné dostupné hodiny"
@@ -2420,6 +2386,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3643,11 +3610,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4373,6 +4335,33 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Hardware je zaneprázdněn, zkuste alternativní piny"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Chybí pin MISO nebo MOSI"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "Chybějící MISO nebo MOSI pin"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Žádný pin MISO"
+
+#~ msgid "No MISO pin"
+#~ msgstr "Žádný MISO pin"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Žádný pin MOSI"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "Žádný MOSI pin"
+
+#~ msgid "No RX pin"
+#~ msgstr "Žádný RX pin"
+
+#~ msgid "No TX pin"
+#~ msgstr "Žádný TX pin"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "Jas musí být 0-1,0"
 

locale/de_DE.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-07-10 14:50+0000\n"
+"PO-Revision-Date: 2023-07-19 21:06+0000\n"
 "Last-Translator: Luc <some_physics@live.com>\n"
 "Language: de_DE\n"
 "MIME-Version: 1.0\n"
@@ -138,8 +138,10 @@ msgstr "%q in %q muss von Typ %q sein, nicht %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -194,6 +196,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q muss 1 sein, wenn %q wahr ist"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q muss <= %d sein"
 
@@ -487,7 +490,7 @@ msgstr "Alle Kanäle werden verwendet"
 
 #: ports/raspberrypi/common-hal/usb_host/Port.c
 msgid "All dma channels in use"
-msgstr ""
+msgstr "All DMA-Kanäle in Verwendung"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
@@ -798,10 +801,6 @@ msgstr "RTS oder CTS können im RS485-Modus nicht angegeben werden"
 msgid "Cannot subclass slice"
 msgstr "Slice kann keine sub-klasse sein"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "Kann nicht ohne MISO und MOSI Pins transferieren"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1119,13 +1118,10 @@ msgstr "Gruppe schon benutzt"
 msgid "Half duplex SPI is not implemented"
 msgstr "Hald-Duplex SPI is tnicht implementiert"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Hardware beschäftigt, versuche alternative Pins"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hardware in Benutzung, probiere alternative Pins"
 
@@ -1392,14 +1388,6 @@ msgstr "Nicht übereinstimmende Datengröße"
 msgid "Mismatched swap flag"
 msgstr "Nicht übereinstimmendes Swap-Flag"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Fehlender MISO- oder MOSI-Pin"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "MISO oder MOSI Pin fehlt"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1473,6 +1461,14 @@ msgid "Nimble out of memory"
 msgstr "Kein Speicher mehr für Nible vorhanden"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Kein %q-Pin"
 
@@ -1506,36 +1502,6 @@ msgstr "Kein I2C-Gerät an Adresse: 0x%x"
 msgid "No IP"
 msgstr "Keine IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Kein MISO-Pin"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "Miso Pin fehlt"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Kein MOSI-Pin"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "MOSI Pin fehlt"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Kein RX-Pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Kein TX-Pin"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Keine Taktgeber verfügbar"
@@ -2477,6 +2443,7 @@ msgstr "Beide Knöpfe wurden beim Starten gedrückt."
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr "Knopf A wurde beim Starten gedrückt."
 
@@ -3722,11 +3689,6 @@ msgstr "kein Standard-Seed"
 msgid "no module named '%q'"
 msgstr "Kein Modul mit dem Namen '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "kein Reset Pin verfügbar"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "keine Antwort von der SD-Karte"
@@ -4460,6 +4422,39 @@ msgstr "zi muss eine Gleitkommazahl sein"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi muss die Form (n_section, 2) haben"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "Kann nicht ohne MISO und MOSI Pins transferieren"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Hardware beschäftigt, versuche alternative Pins"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Fehlender MISO- oder MOSI-Pin"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "MISO oder MOSI Pin fehlt"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Kein MISO-Pin"
+
+#~ msgid "No MISO pin"
+#~ msgstr "Miso Pin fehlt"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Kein MOSI-Pin"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "MOSI Pin fehlt"
+
+#~ msgid "No RX pin"
+#~ msgstr "Kein RX-Pin"
+
+#~ msgid "No TX pin"
+#~ msgstr "Kein TX-Pin"
+
+#~ msgid "no reset pin available"
+#~ msgstr "kein Reset Pin verfügbar"
+
 #~ msgid "Sleep Memory not available"
 #~ msgstr "Sleep-Speicher nicht verfügbar"
 

locale/el.po

@@ -141,8 +141,10 @@ msgstr "%q στο %q πρέπει να είναι τύπου %q, όχι %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -197,6 +199,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q πρέπει να είναι 1 όταν %q είναι True"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q πρέπει να είναι <= %d"
 
@@ -802,10 +805,6 @@ msgstr "Δεν μπορεί να οριστεί RTS ή CTS σε RS485 mode"
 msgid "Cannot subclass slice"
 msgstr "Δεν γίνεται υποκατηγορία ενός slice"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "Δεν μπορεί να γίνει μεταφορά χωρίς MOSI και MISO pins"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1117,13 +1116,10 @@ msgstr ""
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr ""
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -1382,14 +1378,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1463,6 +1451,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr ""
 
@@ -1496,36 +1492,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr ""
@@ -2434,6 +2400,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3657,11 +3624,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4387,6 +4349,9 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "Δεν μπορεί να γίνει μεταφορά χωρίς MOSI και MISO pins"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "Η φωτινότητα πρέπει να είναι μεταξύ 0-1.0"
 

locale/en_GB.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"PO-Revision-Date: 2023-05-23 22:55+0000\n"
+"PO-Revision-Date: 2023-07-19 21:06+0000\n"
 "Last-Translator: Andi Chandler <andi@gowling.com>\n"
 "Language-Team: none\n"
 "Language: en_GB\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.18-dev\n"
+"X-Generator: Weblate 5.0-dev\n"
 
 #: main.c
 msgid ""
@@ -139,8 +139,10 @@ msgstr "%q in %q must be of type %q, not %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -195,6 +197,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q must be 1 when %q is True"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q must be <= %d"
 
@@ -486,7 +489,7 @@ msgstr "All channels in use"
 
 #: ports/raspberrypi/common-hal/usb_host/Port.c
 msgid "All dma channels in use"
-msgstr ""
+msgstr "All DMA channels in use"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
@@ -794,10 +797,6 @@ msgstr "Cannot specify RTS or CTS in RS485 mode"
 msgid "Cannot subclass slice"
 msgstr "Cannot subclass slice"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "Cannot transfer without MOSI and MISO pins"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Cannot vary frequency on a timer that is already in use"
@@ -1108,13 +1107,10 @@ msgstr "Group already used"
 msgid "Half duplex SPI is not implemented"
 msgstr "Half duplex SPI is not implemented"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Hardware busy, try alternative pins"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hardware in use, try alternative pins"
 
@@ -1376,14 +1372,6 @@ msgstr "Mismatched data size"
 msgid "Mismatched swap flag"
 msgstr "Mismatched swap flag"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Missing MISO or MOSI pin"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "Missing MISO or MOSI pin"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1457,6 +1445,14 @@ msgid "Nimble out of memory"
 msgstr "Nimble out of memory"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "No %q pin"
 
@@ -1490,36 +1486,6 @@ msgstr "No I2C device at address: 0x%x"
 msgid "No IP"
 msgstr "No IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "No MISO pin"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "No MISO pin"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "No MOSI pin"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "No MOSI pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "No RX pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "No TX pin"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "No available clocks"
@@ -2443,6 +2409,7 @@ msgstr "You pressed both buttons at start up."
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr "You pressed button A at start up."
 
@@ -3671,11 +3638,6 @@ msgstr "no default seed"
 msgid "no module named '%q'"
 msgstr "no module named '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "no reset pin available"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "no response from SD card"
@@ -4401,6 +4363,39 @@ msgstr "zi must be of float type"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi must be of shape (n_section, 2)"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "Cannot transfer without MOSI and MISO pins"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Hardware busy, try alternative pins"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Missing MISO or MOSI Pin"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "Missing MISO or MOSI pin"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "No MISO Pin"
+
+#~ msgid "No MISO pin"
+#~ msgstr "No MISO pin"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "No MOSI Pin"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "No MOSI pin"
+
+#~ msgid "No RX pin"
+#~ msgstr "No RX pin"
+
+#~ msgid "No TX pin"
+#~ msgstr "No TX pin"
+
+#~ msgid "no reset pin available"
+#~ msgstr "no reset pin available"
+
 #~ msgid "Sleep Memory not available"
 #~ msgstr "Sleep Memory not available"
 

locale/es.po

@@ -141,8 +141,10 @@ msgstr "%q en %q debe ser del tipo %q, no %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -197,6 +199,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q debe ser 1 cuando %q es True"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q debe ser <= %d"
 
@@ -805,10 +808,6 @@ msgstr "No se puede especificar RTS o CTS en modo RS485"
 msgid "Cannot subclass slice"
 msgstr "No se puede manejar la partición en una subclase"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "No puede ser transferido si los pines MOSI y MISO"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "No puede variar la frecuencia en un temporizador que ya está en uso"
@@ -1125,13 +1124,10 @@ msgstr "Grupo ya está siendo utilizado"
 msgid "Half duplex SPI is not implemented"
 msgstr "SPI Half Duplex no está implementado"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Hardware ocupado, pruebe pines alternativos"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hardware en uso, pruebe pines alternativos"
 
@@ -1400,14 +1396,6 @@ msgstr "Inconsistencia en el tamaño de los datos"
 msgid "Mismatched swap flag"
 msgstr "Inconsistencia en el flag de recambio"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Falta el pin MISO o MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "Falta el pin MISO o MOSI"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1485,6 +1473,14 @@ msgid "Nimble out of memory"
 msgstr "Nimble sin memoria"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Sin pin %q"
 
@@ -1518,36 +1514,6 @@ msgstr "No hay dispositivo en la dirección: 0x%x"
 msgid "No IP"
 msgstr "No IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Sin pin MISO"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "No pin MISO"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Sin pin MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "No pin MOSI"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Sin pin RX"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Sin pin TX"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Relojes no disponibles"
@@ -2486,6 +2452,7 @@ msgstr "Usted presionó ambos botones al iniciar."
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr "Usted presionó el botón A al iniciar."
 
@@ -3722,11 +3689,6 @@ msgstr "sin semilla por omisión"
 msgid "no module named '%q'"
 msgstr "ningún módulo se llama '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "no hay pin de reinicio disponible"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "no hay respuesta de la tarjeta SD"
@@ -4456,6 +4418,39 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "No puede ser transferido si los pines MOSI y MISO"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Hardware ocupado, pruebe pines alternativos"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Falta el pin MISO o MOSI"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "Falta el pin MISO o MOSI"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Sin pin MISO"
+
+#~ msgid "No MISO pin"
+#~ msgstr "No pin MISO"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Sin pin MOSI"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "No pin MOSI"
+
+#~ msgid "No RX pin"
+#~ msgstr "Sin pin RX"
+
+#~ msgid "No TX pin"
+#~ msgstr "Sin pin TX"
+
+#~ msgid "no reset pin available"
+#~ msgstr "no hay pin de reinicio disponible"
+
 #~ msgid "Sleep Memory not available"
 #~ msgstr "Memoria de sueño no disponible"
 

locale/fil.po

@@ -127,8 +127,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -183,6 +185,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -786,10 +789,6 @@ msgstr ""
 msgid "Cannot subclass slice"
 msgstr "Hindi magawa ang sublcass slice"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1100,13 +1099,10 @@ msgstr ""
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr ""
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -1367,14 +1363,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1448,6 +1436,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Walang %q pin"
 
@@ -1481,36 +1477,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Walang RX pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Walang TX pin"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr ""
@@ -2423,6 +2389,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3662,11 +3629,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr "walang module na '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4394,6 +4356,12 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "No RX pin"
+#~ msgstr "Walang RX pin"
+
+#~ msgid "No TX pin"
+#~ msgstr "Walang TX pin"
+
 #, fuzzy
 #~ msgid "x value out of bounds"
 #~ msgstr "wala sa sakop ang address"

locale/fr.po

@@ -141,8 +141,10 @@ msgstr "%q dans %q doit être de type %q, pas %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -197,6 +199,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q doit être 1 quand %q est True"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q doit être <= %d"
 
@@ -807,10 +810,6 @@ msgstr "Impossible de spécifier RTS ou CTS en mode RS485"
 msgid "Cannot subclass slice"
 msgstr "On ne peut faire de sous-classes de tranches"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "Impossible de transférer sans une broche MOSI ou MISO"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Impossible de faire varier la fréquence sur un minuteur déjà utilisée"
@@ -1133,13 +1132,10 @@ msgstr "Groupe déjà utilisé"
 msgid "Half duplex SPI is not implemented"
 msgstr "Le half duplex du SPI n'est pas implémenté"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Matériel occupé, essayez d'autres broches"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Matériel utilisé, essayez d'autres broches"
 
@@ -1411,14 +1407,6 @@ msgstr "La taille des données ne correspond pas"
 msgid "Mismatched swap flag"
 msgstr "Le drapeau d'échange ne correspond pas"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Broche MISO ou MOSI manquante"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "La broche MISO ou MOSI est manquante"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1495,6 +1483,14 @@ msgid "Nimble out of memory"
 msgstr "Nimble n'a plus de mémoire"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Pas de broche %q"
 
@@ -1528,36 +1524,6 @@ msgstr "Aucun périphérique I2S à l'adresse : 0x%x"
 msgid "No IP"
 msgstr "Aucune IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Pas de broche MISO"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "Aucune broche MISO"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Pas de broche MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "Aucune broche MOSI"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Pas de broche RX"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Pas de broche TX"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Pas d'horloge disponible"
@@ -2498,6 +2464,7 @@ msgstr "Vous avez appuyé les deux boutons au démarrage."
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr "Vous avez appuyé le bouton A au démarrage."
 
@@ -3743,11 +3710,6 @@ msgstr "aucun seed par défaut"
 msgid "no module named '%q'"
 msgstr "pas de module '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "pas de broche de réinitialisation disponible"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "pas de réponse de la carte SD"
@@ -4479,6 +4441,39 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "Impossible de transférer sans une broche MOSI ou MISO"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Matériel occupé, essayez d'autres broches"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Broche MISO ou MOSI manquante"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "La broche MISO ou MOSI est manquante"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Pas de broche MISO"
+
+#~ msgid "No MISO pin"
+#~ msgstr "Aucune broche MISO"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Pas de broche MOSI"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "Aucune broche MOSI"
+
+#~ msgid "No RX pin"
+#~ msgstr "Pas de broche RX"
+
+#~ msgid "No TX pin"
+#~ msgstr "Pas de broche TX"
+
+#~ msgid "no reset pin available"
+#~ msgstr "pas de broche de réinitialisation disponible"
+
 #~ msgid "Sleep Memory not available"
 #~ msgstr "La mémoire de sommeil n'est pas disponible"
 

locale/hi.po

@@ -126,8 +126,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -182,6 +184,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -779,10 +782,6 @@ msgstr ""
 msgid "Cannot subclass slice"
 msgstr ""
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1090,13 +1089,10 @@ msgstr ""
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr ""
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -1355,14 +1351,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1436,6 +1424,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr ""
 
@@ -1469,36 +1465,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr ""
@@ -2405,6 +2371,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3628,11 +3595,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""

locale/it_IT.po

@@ -130,8 +130,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -186,6 +188,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -789,10 +792,6 @@ msgstr ""
 msgid "Cannot subclass slice"
 msgstr "Impossibile subclasare slice"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1102,13 +1101,10 @@ msgstr ""
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr ""
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -1370,14 +1366,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1451,6 +1439,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Nessun pin %q"
 
@@ -1484,36 +1480,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Nessun pin RX"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Nessun pin TX"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Nessun orologio a disposizione"
@@ -2430,6 +2396,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3668,11 +3635,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr "nessun modulo chiamato '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4404,6 +4366,12 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "No RX pin"
+#~ msgstr "Nessun pin RX"
+
+#~ msgid "No TX pin"
+#~ msgstr "Nessun pin TX"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "La luminosità deve essere tra 0-1.0"
 

locale/ja.po

@@ -133,8 +133,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -189,6 +191,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -790,10 +793,6 @@ msgstr "RS485モードにRTSまたはCTSを指定できません"
 msgid "Cannot subclass slice"
 msgstr "sliceをサブクラス化することはできません"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "使用中のタイマー上では周波数を変えられません"
@@ -1101,13 +1100,10 @@ msgstr "グループはすでに使われています"
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "ハードウェアビジー。代替のピンを試してください"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "ハードウェア使用中。代わりのピンを試してください"
 
@@ -1368,14 +1364,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "MISOまたはMOSIピンがありません"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1449,6 +1437,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "%qピンがありません"
 
@@ -1482,36 +1478,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "MISOピンなし"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "MOSIピンがありません"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "RXピンがありません"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "TXピンがありません"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "利用できるクロックがありません"
@@ -2422,6 +2388,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3650,11 +3617,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr "'%q' という名前のモジュールはありません"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "利用可能なリセットピンがありません"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "SDカードからの応答がありません"
@@ -4382,6 +4344,27 @@ msgstr "ziはfloat値でなければなりません"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "ハードウェアビジー。代替のピンを試してください"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "MISOまたはMOSIピンがありません"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "MISOピンなし"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "MOSIピンがありません"
+
+#~ msgid "No RX pin"
+#~ msgstr "RXピンがありません"
+
+#~ msgid "No TX pin"
+#~ msgstr "TXピンがありません"
+
+#~ msgid "no reset pin available"
+#~ msgstr "利用可能なリセットピンがありません"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "brightnessは0から1.0まででなければなりません"
 

locale/ko.po

@@ -127,8 +127,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -183,6 +185,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -782,10 +785,6 @@ msgstr ""
 msgid "Cannot subclass slice"
 msgstr ""
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
@@ -1093,13 +1092,10 @@ msgstr ""
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr ""
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -1358,14 +1354,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1439,6 +1427,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr ""
 
@@ -1472,36 +1468,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr ""
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr ""
@@ -2409,6 +2375,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3632,11 +3599,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""

locale/nl.po

@@ -126,8 +126,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -182,6 +184,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -782,10 +785,6 @@ msgstr "Kan RTS of CTS niet specificeren in RS485 modus"
 msgid "Cannot subclass slice"
 msgstr "Kan slice niet subclasseren"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Kan de frequentie van een timer die al in gebruik is niet variëren"
@@ -1096,13 +1095,10 @@ msgstr "Groep al gebruikt"
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Hardware bezig, probeer alternatieve pinnen"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hardware in gebruik, probeer alternatieve pinnen"
 
@@ -1363,14 +1359,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Ontbrekende MISO of MOSI Pin"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1444,6 +1432,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Geen %q pin"
 
@@ -1477,36 +1473,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Geen MISO pin"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Geen MOSI pin"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Geen RX pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Geen TX pin"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Geen klokken beschikbaar"
@@ -2432,6 +2398,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3662,11 +3629,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr "geen module met naam '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "geen reset pin beschikbaar"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "geen antwoord van SD kaart"
@@ -4392,6 +4354,27 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Hardware bezig, probeer alternatieve pinnen"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Ontbrekende MISO of MOSI Pin"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Geen MISO pin"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Geen MOSI pin"
+
+#~ msgid "No RX pin"
+#~ msgstr "Geen RX pin"
+
+#~ msgid "No TX pin"
+#~ msgstr "Geen TX pin"
+
+#~ msgid "no reset pin available"
+#~ msgstr "geen reset pin beschikbaar"
+
 #~ msgid "input and output shapes are not compatible"
 #~ msgstr "in- en uitvoervormen zijn niet compatibel"
 

locale/pl.po

@@ -128,8 +128,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -184,6 +186,7 @@ msgid "%q must be 1 when %q is True"
 msgstr ""
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr ""
 
@@ -783,10 +786,6 @@ msgstr "Nie można określić RTS ani CTS w trybie RS485"
 msgid "Cannot subclass slice"
 msgstr "Nie można dziedziczyć ze slice"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr ""
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Nie można zmieniać częstotliwości timera, który jest już używany"
@@ -1096,13 +1095,10 @@ msgstr "Grupa już używana"
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Sprzęt zajęty, wypróbuj alternatywne piny"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Sprzęt w użyciu, wypróbuj alternatywne piny"
 
@@ -1363,14 +1359,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Brak pinu MISO lub MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr ""
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1444,6 +1432,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Brak nóżki %q"
 
@@ -1477,36 +1473,6 @@ msgstr ""
 msgid "No IP"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Brak pinu MISO"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Brak pinu MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr ""
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Brak nóżki RX"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Brak nóżki TX"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Brak wolnych zegarów"
@@ -2413,6 +2379,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3637,11 +3604,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr "brak modułu o nazwie '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4368,6 +4330,24 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Sprzęt zajęty, wypróbuj alternatywne piny"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Brak pinu MISO lub MOSI"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Brak pinu MISO"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Brak pinu MOSI"
+
+#~ msgid "No RX pin"
+#~ msgstr "Brak nóżki RX"
+
+#~ msgid "No TX pin"
+#~ msgstr "Brak nóżki TX"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "Jasność musi wynosić 0-1,0"
 

locale/pt_BR.po

@@ -139,8 +139,10 @@ msgstr "%q em %q deve ser do tipo %q e não %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -195,6 +197,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q deve ser 1 quando %q for verdadeiro"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q deve ser <= %d"
 
@@ -806,10 +809,6 @@ msgstr "Não é possível definir o RTS ou CTS no modo RS485"
 msgid "Cannot subclass slice"
 msgstr "Não é possível subclassificar a fatia"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "Não é possível transferir sem os pinos MOSI e MISO"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Não é possível variar a frequência em um timer que já esteja em uso"
@@ -1122,13 +1121,10 @@ msgstr "O grupo já está em uso"
 msgid "Half duplex SPI is not implemented"
 msgstr "O SPI half duplex ainda não está implementado"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "O hardware está ocupado, tente os pinos alternativos"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "O hardware está em uso, tente os pinos alternativos"
 
@@ -1397,14 +1393,6 @@ msgstr "O tamanho dos dados é incompatível"
 msgid "Mismatched swap flag"
 msgstr "Sinalizador de troca incompatível"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "O pino MISO ou MOSI está ausente"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "Falta o pino MISO ou o MOSI"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1478,6 +1466,14 @@ msgid "Nimble out of memory"
 msgstr "Ágil fora da memória"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Sem pin %q"
 
@@ -1511,36 +1507,6 @@ msgstr "Não há nenhum dispositivo I2C no endereço: 0x%x"
 msgid "No IP"
 msgstr "Sem IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Nenhum pino MISO"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "Nenhum pino MISO"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Nenhum pino MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "Nenhum pino MOSI"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Nenhum pino RX"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Nenhum pino TX"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Nenhum clock disponível"
@@ -2482,6 +2448,7 @@ msgstr "Você pressionou os dois botões durante a inicialização."
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr "Você pressionou o botão A na inicialização."
 
@@ -3722,11 +3689,6 @@ msgstr "nenhuma semente padrão"
 msgid "no module named '%q'"
 msgstr "nenhum módulo chamado '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "nenhum pino de redefinição está disponível"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "não houve resposta do cartão SD"
@@ -4457,6 +4419,39 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "Não é possível transferir sem os pinos MOSI e MISO"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "O hardware está ocupado, tente os pinos alternativos"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "O pino MISO ou MOSI está ausente"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "Falta o pino MISO ou o MOSI"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Nenhum pino MISO"
+
+#~ msgid "No MISO pin"
+#~ msgstr "Nenhum pino MISO"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Nenhum pino MOSI"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "Nenhum pino MOSI"
+
+#~ msgid "No RX pin"
+#~ msgstr "Nenhum pino RX"
+
+#~ msgid "No TX pin"
+#~ msgstr "Nenhum pino TX"
+
+#~ msgid "no reset pin available"
+#~ msgstr "nenhum pino de redefinição está disponível"
+
 #~ msgid "Sleep Memory not available"
 #~ msgstr "Sleep memory não está disponível"
 

locale/ru.po

@@ -133,8 +133,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -189,6 +191,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q должно быть 1 когда %q is True"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q должно быть <= %d"
 
@@ -799,10 +802,6 @@ msgstr "Невозможно указать RTS или CTS в режиме RS485
 msgid "Cannot subclass slice"
 msgstr "Срез субкласса невозможен"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "Невозможно передать данные без пинов MOSI и MISO"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Невозможно изменить частоту на таймере, который уже используется"
@@ -1127,13 +1126,10 @@ msgstr "Группа уже используется"
 msgid "Half duplex SPI is not implemented"
 msgstr "Полудуплексный SPI не реализован"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Оборудование занято, попробуйте использовать другие пины"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Оборудование используется, попробуйте использовать другие пины"
 
@@ -1402,14 +1398,6 @@ msgstr "Размер данных различается"
 msgid "Mismatched swap flag"
 msgstr "Несоответствие флага swap"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Отсутствует пин MISO или MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "Отсутствует пин MISO или MOSI"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1484,6 +1472,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Нет пина %q"
 
@@ -1517,36 +1513,6 @@ msgstr "Не найдено устройство I2C по адресу: %x"
 msgid "No IP"
 msgstr "Нет IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Нет пина MISO"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "Нет пина MISO"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Нет пина MOSI"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "Нет пина MOSI"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Нет пина RX"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Нет пина TX"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr ""
@@ -2468,6 +2434,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3691,11 +3658,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "нет доступного контакта сброса"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4421,6 +4383,39 @@ msgstr "zi должно быть типа float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi должен иметь форму (n_section, 2)"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "Невозможно передать данные без пинов MOSI и MISO"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Оборудование занято, попробуйте использовать другие пины"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Отсутствует пин MISO или MOSI"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "Отсутствует пин MISO или MOSI"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Нет пина MISO"
+
+#~ msgid "No MISO pin"
+#~ msgstr "Нет пина MISO"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Нет пина MOSI"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "Нет пина MOSI"
+
+#~ msgid "No RX pin"
+#~ msgstr "Нет пина RX"
+
+#~ msgid "No TX pin"
+#~ msgstr "Нет пина TX"
+
+#~ msgid "no reset pin available"
+#~ msgstr "нет доступного контакта сброса"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "Яркость должна быть в диапазоне от 0 до 1.0"
 

locale/sv.po

@@ -138,8 +138,10 @@ msgstr "%q i %q måste vara av typen %q, inte %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -194,6 +196,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q måste vara 1 när %q är sann"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q måste vara <= %d"
 
@@ -797,10 +800,6 @@ msgstr "Det går inte att specificera RTS eller CTS i RS485-läget"
 msgid "Cannot subclass slice"
 msgstr "Det går inte att subklassa slice"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "Det går inte att överföra utan MOSI- och MISO-pinnar"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Det går inte att ändra frekvensen på en timer som redan används"
@@ -1113,13 +1112,10 @@ msgstr "Grupp används redan"
 msgid "Half duplex SPI is not implemented"
 msgstr "Halvduplex SPI är inte implementerat"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Hårdvaran är upptagen, prova alternativa pinnar"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hårdvaran används redan, prova alternativa pinnar"
 
@@ -1383,14 +1379,6 @@ msgstr "Datastorlek matchar inte"
 msgid "Mismatched swap flag"
 msgstr "Felaktig swapflagga"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "MISO- eller MOSI-pinne saknas"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "Saknad MISO- eller MOSI-pinne"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1464,6 +1452,14 @@ msgid "Nimble out of memory"
 msgstr "Nimble har inget minne kvar"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Ingen %q-pinne"
 
@@ -1497,36 +1493,6 @@ msgstr "Ingen I2C-enhet på adress: 0x%x"
 msgid "No IP"
 msgstr "Ingen IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Ingen MISO-pinne"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "Ingen MISO-pinne"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Ingen MOSI-pinne"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "Ingen MOSI-pinne"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Ingen RX-pinne"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Ingen TX-pinne"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Inga tillgängliga klockor"
@@ -2455,6 +2421,7 @@ msgstr "Du tryckte ner båda knapparna vid start."
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr "Du tryckte ner knapp A vid start."
 
@@ -3688,11 +3655,6 @@ msgstr "inget standard seed"
 msgid "no module named '%q'"
 msgstr "ingen modul med namnet '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "ingen reset-pinne tillgänglig"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "inget svar från SD-kort"
@@ -4419,6 +4381,39 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "Det går inte att överföra utan MOSI- och MISO-pinnar"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Hårdvaran är upptagen, prova alternativa pinnar"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "MISO- eller MOSI-pinne saknas"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "Saknad MISO- eller MOSI-pinne"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Ingen MISO-pinne"
+
+#~ msgid "No MISO pin"
+#~ msgstr "Ingen MISO-pinne"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Ingen MOSI-pinne"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "Ingen MOSI-pinne"
+
+#~ msgid "No RX pin"
+#~ msgstr "Ingen RX-pinne"
+
+#~ msgid "No TX pin"
+#~ msgstr "Ingen TX-pinne"
+
+#~ msgid "no reset pin available"
+#~ msgstr "ingen reset-pinne tillgänglig"
+
 #~ msgid "Sleep Memory not available"
 #~ msgstr "Sömnminne inte tillgängligt"
 

locale/tr.po

@@ -134,8 +134,10 @@ msgstr ""
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -190,6 +192,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "%q 1 olmalı, %q True olduğu zaman"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q <= %d olmalıdır"
 
@@ -791,10 +794,6 @@ msgstr "RS485 modunda RTS veya CTS belirtilemez"
 msgid "Cannot subclass slice"
 msgstr ""
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "MOSI ve MISO pinleri olmadan transfer edilemiyor"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Kullanımda olan bir zamanlayıcının frekansı değiştirilemez"
@@ -1106,13 +1105,10 @@ msgstr "Grup zaten kullanılıyor"
 msgid "Half duplex SPI is not implemented"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Donanım meşgul, alternatif pinleri deneyin"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Donanım kullanımda, alternatif pinleri deneyin"
 
@@ -1374,14 +1370,6 @@ msgstr ""
 msgid "Mismatched swap flag"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Eksik MISO veya MOSI pini"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "Eksik MISO veya MOSI pini"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1455,6 +1443,14 @@ msgid "Nimble out of memory"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "%q pini yok"
 
@@ -1488,36 +1484,6 @@ msgstr ""
 msgid "No IP"
 msgstr "IP yok"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "MISO pini yok"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "MISO pini yok"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "MOSI pini yok"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "MOSI pini yok"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "RX pini yok"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "TX pini yok"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Kullanılabilir saat yok"
@@ -2427,6 +2393,7 @@ msgstr ""
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr ""
 
@@ -3650,11 +3617,6 @@ msgstr ""
 msgid "no module named '%q'"
 msgstr ""
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr ""
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr ""
@@ -4380,6 +4342,36 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "MOSI ve MISO pinleri olmadan transfer edilemiyor"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Donanım meşgul, alternatif pinleri deneyin"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Eksik MISO veya MOSI pini"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "Eksik MISO veya MOSI pini"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "MISO pini yok"
+
+#~ msgid "No MISO pin"
+#~ msgstr "MISO pini yok"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "MOSI pini yok"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "MOSI pini yok"
+
+#~ msgid "No RX pin"
+#~ msgstr "RX pini yok"
+
+#~ msgid "No TX pin"
+#~ msgstr "TX pini yok"
+
 #~ msgid "Brightness must be 0-1.0"
 #~ msgstr "Parlaklık 0-1.0 aralığında olmalı"
 

locale/zh_Latn_pinyin.po

@@ -7,7 +7,7 @@ msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2023-07-16 04:32+0000\n"
+"PO-Revision-Date: 2023-07-21 00:10+0000\n"
 "Last-Translator: hexthat <hexthat@gmail.com>\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
 "Language: zh_Latn_pinyin\n"
@@ -141,8 +141,10 @@ msgstr "%q zhōng de %q bì xū shì %q lèi xíng, ér bù shì %q"
 
 #: ports/espressif/common-hal/espulp/ULP.c
 #: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
+#: ports/mimxrt10xx/common-hal/usb_host/Port.c
 #: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#: ports/raspberrypi/common-hal/usb_host/Port.c
 #: shared-bindings/digitalio/DigitalInOut.c
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -197,6 +199,7 @@ msgid "%q must be 1 when %q is True"
 msgstr "sāng %q wèi True shí, %q bìxū wèi 1"
 
 #: py/argcheck.c shared-bindings/gifio/GifWriter.c
+#: shared-module/gifio/OnDiskGif.c
 msgid "%q must be <= %d"
 msgstr "%q bìxū <= %d"
 
@@ -800,10 +803,6 @@ msgstr "wúfǎ zài RS485 móshì xià zhǐdìng RTS huò CTS"
 msgid "Cannot subclass slice"
 msgstr "bùnéng zǐlèihuà qiēpiàn"
 
-#: shared-module/bitbangio/SPI.c
-msgid "Cannot transfer without MOSI and MISO pins"
-msgstr "méiyǒu MOSI hé MISO yǐnjiǎo, wúfǎ chuánshū"
-
 #: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr "Wúfǎ zài shǐyòng zhōng de jìshí qì shàng gēnggǎi pínlǜ"
@@ -1117,13 +1116,10 @@ msgstr "Jítuán yǐjīng shǐyòngguò"
 msgid "Half duplex SPI is not implemented"
 msgstr "wèi shí xiàn bàn shuāng gōng SPI"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
-#: ports/stm/common-hal/sdioio/SDCard.c
+#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
-msgid "Hardware busy, try alternative pins"
+#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
-msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo"
-
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Shǐyòng de yìngjiàn, qǐng chángshì qítā yǐn jiǎo"
 
@@ -1389,14 +1385,6 @@ msgstr "shùjù dàxiǎo bù pǐpèi"
 msgid "Mismatched swap flag"
 msgstr "jiāohuàn biāozhì bù pǐpèi"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo"
-
-#: ports/stm/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI pin"
-msgstr "quēshǎo MISO huò MOSI yǐn jiǎo"
-
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
 msgid "Missing first_in_pin. Instruction %d reads pin(s)"
@@ -1471,6 +1459,14 @@ msgid "Nimble out of memory"
 msgstr "líng huó de bǎi tuō jì yì"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/espressif/common-hal/busio/SPI.c
+#: ports/espressif/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/UART.c shared-bindings/displayio/FourWire.c
+#: shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/paralleldisplay/ParallelBus.c shared-module/bitbangio/SPI.c
 msgid "No %q pin"
 msgstr "Wèi zhǎodào %q yǐn jiǎo"
 
@@ -1504,36 +1500,6 @@ msgstr "dì zhǐ: 0x%x shí méi yǒu I2C qì jiàn"
 msgid "No IP"
 msgstr "wú IP"
 
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr "Méiyǒu MISO yǐn jiǎo"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MISO pin"
-msgstr "wú MISO pin"
-
-#: ports/espressif/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr "Méiyǒu MOSI yǐn jiǎo"
-
-#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
-msgid "No MOSI pin"
-msgstr "wú MOSI pin"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No RX pin"
-msgstr "Wèi zhǎodào RX yǐn jiǎo"
-
-#: ports/espressif/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
-msgid "No TX pin"
-msgstr "Wèi zhǎodào TX yǐn jiǎo"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "No available clocks"
 msgstr "Méiyǒu kěyòng de shízhōng"
@@ -1641,7 +1607,7 @@ msgstr "Bù zhīchí jīshù"
 
 #: supervisor/shared/bluetooth/bluetooth.c
 msgid "Off"
-msgstr "guānbì"
+msgstr "Guānbì"
 
 #: supervisor/shared/bluetooth/bluetooth.c
 msgid "Ok"
@@ -2460,6 +2426,7 @@ msgstr "nín zài qǐ dòng shí àn xià le liǎng gè àn niǔ."
 #: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
 #: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
 #: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
+#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
 msgid "You pressed button A at start up."
 msgstr "nín zài qǐ dòng shí àn xià le àn niǔ A."
 
@@ -3286,7 +3253,7 @@ msgstr "bù zhèngquè de tiánchōng"
 
 #: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/transform.c
 msgid "index is out of bounds"
-msgstr "suǒyǐn chāochū fànwéi"
+msgstr "suǒyǐn yuèjiè"
 
 #: shared-bindings/_pixelmap/PixelMap.c
 msgid "index must be tuple or int"
@@ -3692,11 +3659,6 @@ msgstr "wú mò rèn zhǒng zi"
 msgid "no module named '%q'"
 msgstr "méiyǒu mókuài '%q'"
 
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
-#: shared-bindings/paralleldisplay/ParallelBus.c
-msgid "no reset pin available"
-msgstr "Méiyǒu kěyòng de fùwèi yǐn jiǎo"
-
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
 msgstr "SD kǎ wú huíyīng"
@@ -4425,6 +4387,39 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "Cannot transfer without MOSI and MISO pins"
+#~ msgstr "méiyǒu MOSI hé MISO yǐnjiǎo, wúfǎ chuánshū"
+
+#~ msgid "Hardware busy, try alternative pins"
+#~ msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo"
+
+#~ msgid "Missing MISO or MOSI Pin"
+#~ msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo"
+
+#~ msgid "Missing MISO or MOSI pin"
+#~ msgstr "quēshǎo MISO huò MOSI yǐn jiǎo"
+
+#~ msgid "No MISO Pin"
+#~ msgstr "Méiyǒu MISO yǐn jiǎo"
+
+#~ msgid "No MISO pin"
+#~ msgstr "wú MISO pin"
+
+#~ msgid "No MOSI Pin"
+#~ msgstr "Méiyǒu MOSI yǐn jiǎo"
+
+#~ msgid "No MOSI pin"
+#~ msgstr "wú MOSI pin"
+
+#~ msgid "No RX pin"
+#~ msgstr "Wèi zhǎodào RX yǐn jiǎo"
+
+#~ msgid "No TX pin"
+#~ msgstr "Wèi zhǎodào TX yǐn jiǎo"
+
+#~ msgid "no reset pin available"
+#~ msgstr "Méiyǒu kěyòng de fùwèi yǐn jiǎo"
+
 #~ msgid "Sleep Memory not available"
 #~ msgstr "shuì mián jì yì bù kě yòng"
 

ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk

@@ -12,6 +12,7 @@ LONGINT_IMPL = MPZ
 
 # No I2S on SAMD51G
 CIRCUITPY_AUDIOBUSIO = 0
+CIRCUITPY_SYNTHIO = 0
 
 CIRCUITPY_BITBANG_APA102 = 1
 

ports/atmel-samd/mpconfigport.h

@@ -173,6 +173,30 @@
 #define BOARD_HAS_CRYSTAL (0)
 #endif
 
+#ifndef BOARD_XOSC_FREQ_HZ
+// 0 Indicates XOSC is not used.
+  #define BOARD_XOSC_FREQ_HZ (0)
+#else
+// For now, only allow external clock sources that divide cleanly into
+// the system clock frequency of 120 MHz.
+  #if (120000000 % BOARD_XOSC_FREQ_HZ) != 0
+    #error "BOARD_XOSC_FREQ_HZ must be an integer factor of 120 MHz"
+  #endif
+#endif
+
+#if BOARD_XOSC_FREQ_HZ != 0
+// External clock sources are currently not implemented for SAMD21 chips.
+  #ifdef SAMD21
+    #error "BOARD_XOSC_FREQ_HZ is non-zero but external clock sources are not yet supported for SAMD21 chips"
+  #endif
+  #ifndef BOARD_XOSC_IS_CRYSTAL
+    #error "BOARD_XOSC_IS_CRYSTAL must be defined to 0 or 1 if BOARD_XOSC_FREQ_HZ is not 0"
+  #endif
+#else
+// It doesn't matter what the value is in this case.
+  #define BOARD_XOSC_IS_CRYSTAL (0)
+#endif
+
 // if CALIBRATE_CRYSTALLESS is requested, make room for storing
 // calibration data generated from external USB.
 #ifndef CIRCUITPY_INTERNAL_CONFIG_SIZE

ports/atmel-samd/peripherals

@@ -1 +1 @@
-Subproject commit baca4c084334aa8625f525a4032d66a397199ea6
+Subproject commit 82e514b6e0d1a2b09dc73be9973663b6b837a817

ports/atmel-samd/supervisor/port.c

@@ -353,10 +353,10 @@ safe_mode_t port_init(void) {
     if (strcmp((char *)CIRCUITPY_INTERNAL_CONFIG_START_ADDR, "CIRCUITPYTHON1") == 0) {
         fine = ((uint16_t *)CIRCUITPY_INTERNAL_CONFIG_START_ADDR)[8];
     }
-    clock_init(BOARD_HAS_CRYSTAL, fine);
+    clock_init(BOARD_HAS_CRYSTAL, BOARD_XOSC_FREQ_HZ, BOARD_XOSC_IS_CRYSTAL, fine);
     #else
     // Use a default fine value
-    clock_init(BOARD_HAS_CRYSTAL, DEFAULT_DFLL48M_FINE_CALIBRATION);
+    clock_init(BOARD_HAS_CRYSTAL, BOARD_XOSC_FREQ_HZ, BOARD_XOSC_IS_CRYSTAL, DEFAULT_DFLL48M_FINE_CALIBRATION);
     #endif
 
     rtc_init();

ports/broadcom/common-hal/busio/UART.c

@@ -352,7 +352,7 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
 // Write characters.
 size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
     if (self->tx_pin == NULL) {
-        mp_raise_ValueError(translate("No TX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_tx);
     }
 
     COMPLETE_MEMORY_READS;
@@ -400,7 +400,7 @@ STATIC void enable_interrupt(busio_uart_obj_t *self) {
 // Read characters.
 size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
     if (self->rx_pin == NULL) {
-        mp_raise_ValueError(translate("No RX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_rx);
     }
 
     if (len == 0) {

ports/espressif/boards/luatos_core_esp32c3_ch343/board.c

@@ -0,0 +1,29 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/luatos_core_esp32c3_ch343/mpconfigboard.h

@@ -0,0 +1,44 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Board setup
+
+#define MICROPY_HW_BOARD_NAME       "Luatos Core-ESP32C3"
+#define MICROPY_HW_MCU_NAME         "ESP32-C3"
+
+// Status LED
+#define MICROPY_HW_LED_STATUS (&pin_GPIO12)
+
+#define CIRCUITPY_BOARD_UART        (1)
+#define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO21, .rx = &pin_GPIO20}}
+
+// Default bus pins
+#define DEFAULT_UART_BUS_RX         (&pin_GPIO20)
+#define DEFAULT_UART_BUS_TX         (&pin_GPIO21)
+
+// Serial over UART
+#define CIRCUITPY_CONSOLE_UART_RX               DEFAULT_UART_BUS_RX
+#define CIRCUITPY_CONSOLE_UART_TX               DEFAULT_UART_BUS_TX

ports/espressif/boards/luatos_core_esp32c3_ch343/mpconfigboard.mk

@@ -0,0 +1,8 @@
+CIRCUITPY_CREATOR_ID =  0xDEADBEEF
+CIRCUITPY_CREATION_ID = 0x00C30002
+
+IDF_TARGET = esp32c3
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=80m
+CIRCUITPY_ESP_FLASH_SIZE=4MB

ports/espressif/boards/luatos_core_esp32c3_ch343/pins.c

@@ -0,0 +1,36 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // Luatos Core ESP32-C3
+    // Documentation (Chinese only):
+    // https://wiki.luatos.com/chips/esp32c3/index.html
+    // Pinout:
+    // https://wiki.luatos.com/_images/20221023.png
+    // C3 Data Sheet
+    // https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    // IO11 used internally on this board version despite being broken out to a pin
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/luatos_core_esp32c3_ch343/sdkconfig

@@ -0,0 +1,5 @@
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="luatos-core-esp32c3"
+# end of LWIP

ports/espressif/boards/unexpectedmaker_feathers3/mpconfigboard.h

@@ -34,8 +34,9 @@
 
 #define MICROPY_HW_LED_STATUS (&pin_GPIO13)
 
-#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
+#define CIRCUITPY_BOARD_I2C         (2)
-#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO9, .sda = &pin_GPIO8}, \
+                                     {.scl = &pin_GPIO15, .sda = &pin_GPIO16}}
 
 #define DEFAULT_SPI_BUS_SCK (&pin_GPIO36)
 #define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)

ports/espressif/boards/unexpectedmaker_feathers3/pins.c

@@ -1,5 +1,7 @@
 #include "shared-bindings/board/__init__.h"
 
+CIRCUITPY_BOARD_BUS_SINGLETON(stemma_i2c, i2c, 1)
+
 STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
 
@@ -89,11 +91,16 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO11) },
     { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_GPIO11) },
 
-    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) }, // Blue LED
+    // Blue LED
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) },
+
+    // STEMMA QT Vertical Connector I2C IO
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_GPIO16) },
 
     // Battery voltage sense pin
-    // I really don't know what name to use here. Adafruit use BATTERY & VOLTAGE_MONITOR
-    // I prefer VBAT or VBAT_SENSE
     { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_GPIO2) },
     { MP_ROM_QSTR(MP_QSTR_VBAT), MP_ROM_PTR(&pin_GPIO2) },
     { MP_ROM_QSTR(MP_QSTR_VBAT_SENSE), MP_ROM_PTR(&pin_GPIO2) },
@@ -103,18 +110,29 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_VBUS), MP_ROM_PTR(&pin_GPIO34) },
     { MP_ROM_QSTR(MP_QSTR_VBUS_SENSE), MP_ROM_PTR(&pin_GPIO34) },
 
+    // Neopixel pins
     { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO39) },
     { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO40) },
 
-    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) }, // Ambient Light Sensor
+    // Ambient Light Sensor
-    { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) }, // Ambient Light Sensor
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_AMB), MP_ROM_PTR(&pin_GPIO4) },
 
-    { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO39) }, // Second LDO Enable control
+    // Second LDO Enable control
-    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) }, // Second LDO Enable control
+    { MP_ROM_QSTR(MP_QSTR_LDO2), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
 
+    // I2C
     { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
     { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_VERTICAL_I2C), MP_ROM_PTR(&board_stemma_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C2), MP_ROM_PTR(&board_stemma_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_I2C2), MP_ROM_PTR(&board_stemma_i2c_obj) },
+
+    // SPI
     { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+
+    // UART
     { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
 };
 MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/common-hal/busio/SPI.c

@@ -186,7 +186,7 @@ void common_hal_busio_spi_unlock(busio_spi_obj_t *self) {
 bool common_hal_busio_spi_write(busio_spi_obj_t *self,
     const uint8_t *data, size_t len) {
     if (self->MOSI == NULL) {
-        mp_raise_ValueError(translate("No MOSI Pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
     }
     return common_hal_busio_spi_transfer(self, data, NULL, len);
 }
@@ -194,7 +194,7 @@ bool common_hal_busio_spi_write(busio_spi_obj_t *self,
 bool common_hal_busio_spi_read(busio_spi_obj_t *self,
     uint8_t *data, size_t len, uint8_t write_value) {
     if (self->MISO == NULL) {
-        mp_raise_ValueError(translate("No MISO Pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     }
     if (self->MOSI == NULL) {
         return common_hal_busio_spi_transfer(self, NULL, data, len);
@@ -210,10 +210,10 @@ bool common_hal_busio_spi_transfer(busio_spi_obj_t *self,
         return true;
     }
     if (self->MOSI == NULL && data_out != NULL) {
-        mp_raise_ValueError(translate("No MOSI Pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
     }
     if (self->MISO == NULL && data_in != NULL) {
-        mp_raise_ValueError(translate("No MISO Pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     }
 
     spi_transaction_t transactions[MAX_SPI_TRANSACTIONS];

ports/espressif/common-hal/busio/UART.c

@@ -304,7 +304,7 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
 // Read characters.
 size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
     if (self->rx_pin == NULL) {
-        mp_raise_ValueError(translate("No RX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_rx);
     }
     if (len == 0) {
         // Nothing to read.
@@ -357,7 +357,7 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t
 // Write characters.
 size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
     if (self->tx_pin == NULL) {
-        mp_raise_ValueError(translate("No TX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_tx);
     }
 
     size_t left_to_write = len;

ports/espressif/mpconfigport.mk

@@ -38,6 +38,7 @@ CIRCUITPY_NVM ?= 1
 CIRCUITPY_PS2IO ?= 1
 CIRCUITPY_RGBMATRIX ?= 1
 CIRCUITPY_ROTARYIO ?= 1
+CIRCUITPY_SYNTHIO_MAX_CHANNELS ?= 12
 CIRCUITPY_TOUCHIO_USE_NATIVE ?= 1
 CIRCUITPY_WATCHDOG ?= 1
 CIRCUITPY_WIFI ?= 1

ports/mimxrt10xx/boards/imxrt1060_evk/board.c

@@ -28,6 +28,8 @@
 #include "supervisor/board.h"
 #include "shared-bindings/microcontroller/Pin.h"
 
+#include "shared-bindings/usb_host/Port.h"
+
 // These pins should never ever be reset; doing so could interfere with basic operation.
 // Used in common-hal/microcontroller/Pin.c
 const mcu_pin_obj_t *mimxrt10xx_reset_forbidden_pins[] = {
@@ -55,4 +57,8 @@ const mcu_pin_obj_t *mimxrt10xx_reset_forbidden_pins[] = {
     NULL,                       // Must end in NULL.
 };
 
+void board_init(void) {
+    common_hal_usb_host_port_construct(&pin_USB_OTG2_DP, &pin_USB_OTG2_DN);
+}
+
 // Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/mimxrt10xx/boards/imxrt1060_evkb/board.c

@@ -28,6 +28,8 @@
 #include "supervisor/board.h"
 #include "shared-bindings/microcontroller/Pin.h"
 
+#include "shared-bindings/usb_host/Port.h"
+
 // These pins should never ever be reset; doing so could interfere with basic operation.
 // Used in common-hal/microcontroller/Pin.c
 const mcu_pin_obj_t *mimxrt10xx_reset_forbidden_pins[] = {
@@ -52,7 +54,11 @@ const mcu_pin_obj_t *mimxrt10xx_reset_forbidden_pins[] = {
     // USB Pins
     &pin_GPIO_AD_B0_01, // ID Pin
     &pin_GPIO_AD_B0_03, // OC/Fault Pin
-    NULL,                       // Must end in NULL.
+    NULL,               // Must end in NULL.
 };
 
+void board_init(void) {
+    common_hal_usb_host_port_construct(&pin_USB_OTG2_DP, &pin_USB_OTG2_DN);
+}
+
 // Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/mimxrt10xx/boards/teensy41/board.c

@@ -28,6 +28,8 @@
 #include "supervisor/board.h"
 #include "shared-bindings/microcontroller/Pin.h"
 
+#include "shared-bindings/usb_host/Port.h"
+
 // These pins should never ever be reset; doing so could interfere with basic operation.
 // Used in common-hal/microcontroller/Pin.c
 const mcu_pin_obj_t *mimxrt10xx_reset_forbidden_pins[] = {
@@ -54,4 +56,8 @@ const mcu_pin_obj_t *mimxrt10xx_reset_forbidden_pins[] = {
     NULL,                       // Must end in NULL.
 };
 
+void board_init(void) {
+    common_hal_usb_host_port_construct(&pin_USB_OTG2_DP, &pin_USB_OTG2_DN);
+}
+
 // Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/mimxrt10xx/common-hal/busio/SPI.c

@@ -182,7 +182,7 @@ void common_hal_busio_spi_construct(busio_spi_obj_t *self,
         self->spi = mcu_spi_banks[self->clock->bank_idx - 1];
     } else {
         if (spi_taken) {
-            mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+            mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
         } else {
             raise_ValueError_invalid_pins();
         }
@@ -331,7 +331,7 @@ bool common_hal_busio_spi_write(busio_spi_obj_t *self,
         return true;
     }
     if (self->mosi == NULL) {
-        mp_raise_ValueError(translate("No MOSI Pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
     }
 
     lpspi_transfer_t xfer = { 0 };
@@ -349,7 +349,7 @@ bool common_hal_busio_spi_read(busio_spi_obj_t *self,
         return true;
     }
     if (self->miso == NULL) {
-        mp_raise_ValueError(translate("No MISO Pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     }
 
     LPSPI_SetDummyData(self->spi, write_value);
@@ -367,8 +367,11 @@ bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, const uint8_t *data_ou
     if (len == 0) {
         return true;
     }
-    if (self->miso == NULL || self->mosi == NULL) {
+    if (self->mosi == NULL && data_out != NULL) {
-        mp_raise_ValueError(translate("Missing MISO or MOSI Pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
+    }
+    if (self->miso == NULL && data_in != NULL) {
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     }
 
     LPSPI_SetDummyData(self->spi, 0xFF);

ports/mimxrt10xx/common-hal/busio/UART.c

@@ -401,7 +401,7 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
 // Read characters.
 size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
     if (self->rx == NULL) {
-        mp_raise_ValueError(translate("No RX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_rx);
     }
 
     if (len == 0) {
@@ -458,7 +458,7 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t
 // Write characters.
 size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
     if (self->tx == NULL) {
-        mp_raise_ValueError(translate("No TX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_tx);
     }
     if (self->rs485_dir && len) {
         GPIO_PinWrite(self->rs485_dir->gpio, self->rs485_dir->number, !self->rs485_invert);

ports/mimxrt10xx/common-hal/usb_host/Port.c

@@ -29,9 +29,13 @@
 
 #include "py/runtime.h"
 
-bool usb_host_init;
+#include "tusb.h"
 
-void common_hal_usb_host_port_construct(usb_host_port_obj_t *self, const mcu_pin_obj_t *dp, const mcu_pin_obj_t *dm) {
+#include "imx_usb.h"
+
+usb_host_port_obj_t usb_host_instance;
+
+usb_host_port_obj_t *common_hal_usb_host_port_construct(const mcu_pin_obj_t *dp, const mcu_pin_obj_t *dm) {
     const mcu_pin_obj_t *supported_dp;
     const mcu_pin_obj_t *supported_dm;
     if (CIRCUITPY_USB_HOST_INSTANCE == 0) {
@@ -41,18 +45,27 @@ void common_hal_usb_host_port_construct(usb_host_port_obj_t *self, const mcu_pin
         supported_dp = &pin_USB_OTG2_DP;
         supported_dm = &pin_USB_OTG2_DN;
     }
+    // Return the singleton if given the same pins.
+    usb_host_port_obj_t *self = &usb_host_instance;
+    if (self->dp != NULL) {
+        if (self->dp != dp || self->dm != dm) {
+            mp_raise_msg_varg(&mp_type_RuntimeError, translate("%q in use"), MP_QSTR_usb_host);
+        }
+        return self;
+    }
     if (dp != supported_dp || dm != supported_dm) {
         raise_ValueError_invalid_pins();
     }
-    self->init = true;
-    usb_host_init = true;
-}
 
-void common_hal_usb_host_port_deinit(usb_host_port_obj_t *self) {
+    assert_pin_free(dp);
-    self->init = false;
+    assert_pin_free(dm);
-    usb_host_init = false;
-}
 
-bool common_hal_usb_host_port_deinited(usb_host_port_obj_t *self) {
+    init_usb_instance(CIRCUITPY_USB_HOST_INSTANCE);
-    return !self->init;
+    tuh_init(TUH_OPT_RHPORT);
+
+    self->base.type = &usb_host_port_type;
+    self->dp = dp;
+    self->dm = dm;
+
+    return self;
 }

ports/mimxrt10xx/common-hal/usb_host/Port.h

@@ -31,11 +31,8 @@
 
 typedef struct {
     mp_obj_base_t base;
-    bool init;
+    const mcu_pin_obj_t *dp;
+    const mcu_pin_obj_t *dm;
 } usb_host_port_obj_t;
 
-// Cheater state so that the usb module knows if it should return the TinyUSB
-// state.
-extern bool usb_host_init;
-
 #endif // MICROPY_INCLUDED_MIMXRT10XX_COMMON_HAL_USB_HOST_PORT_H

ports/mimxrt10xx/imx_usb.h

@@ -0,0 +1,31 @@
+/*
+ * This file is part of the Micro Python project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#pragma once
+
+// Provided by supervisor/usb.c that has a shared, non-port-specific header. So,
+// just define it here.
+void init_usb_instance(mp_int_t instance);

ports/mimxrt10xx/linking/common.ld

@@ -71,7 +71,7 @@ SECTIONS
         . = ALIGN(4);
     *(EXCLUDE_FILE(
         *fsl_flexspi.o
-        *dcd_ci_hs.o
+        *cd_ci_hs.o
         *ehci.o
         *tusb_fifo.o
         *usbd.o
@@ -88,6 +88,9 @@ SECTIONS
         /* Keep USB processing functions out of RAM because we don't know which will be used.
            We try to only keep USB interrupt related functions. */
         *dcd_ci_hs.o(.text.process_*_request .text.dcd_edpt* .text.dcd_init .text.dcd_set_address)
+        /* Move hcd_dcache* routines to RAM so that we don't cross execution from
+           the cache during cache maintenance. Weird things happen when we do. */
+        *hcd_ci_hs.o(.text.hcd_i*)
         *usbd.o(.text.process_*_request .text.process_[gs]et* .text.tud_* .text.usbd_* .text.configuration_reset .text.invoke_*)
         *ehci.o(.text.hcd_edpt* .text.hcd_setup* .text.ehci_init* .text.hcd_port* .text.hcd_device* .text.qtd_init* .text.list_remove*)
 

ports/mimxrt10xx/mpconfigport.h

@@ -37,7 +37,6 @@ extern uint8_t _ld_filesystem_start;
 extern uint8_t _ld_filesystem_end;
 extern uint8_t _ld_default_stack_size;
 
-// 20kiB stack
 #define CIRCUITPY_DEFAULT_STACK_SIZE                ((uint32_t)&_ld_default_stack_size)
 #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED          (0)
 #define MICROPY_PY_FUNCTION_ATTRS                   (0)
@@ -47,6 +46,10 @@ extern uint8_t _ld_default_stack_size;
 #define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_START_ADDR ((uint32_t)&_ld_filesystem_start)
 #define CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE ((uint32_t)(&_ld_filesystem_end - &_ld_filesystem_start))
 
+// Allocate 32 bytes at a time instead of the default 16 so that allocated buffers
+// are aligned to cache lines.
+#define MICROPY_BYTES_PER_GC_BLOCK              (32)
+
 #include "py/circuitpy_mpconfig.h"
 
 #define MICROPY_PORT_ROOT_POINTERS \

ports/mimxrt10xx/supervisor/usb.c

@@ -31,7 +31,9 @@
 #include "supervisor/linker.h"
 #include "supervisor/usb.h"
 
-STATIC void init_usb_instance(mp_int_t instance) {
+#include "imx_usb.h"
+
+void init_usb_instance(mp_int_t instance) {
     if (instance < 0) {
         return;
     }
@@ -72,9 +74,6 @@ STATIC void init_usb_instance(mp_int_t instance) {
 
     void init_usb_hardware(void) {
         init_usb_instance(CIRCUITPY_USB_DEVICE_INSTANCE);
-        // We can't dynamically start the USB Host port at the moment, so do it
-        // up front.
-        init_usb_instance(CIRCUITPY_USB_HOST_INSTANCE);
     }
 
 // Provide the prototypes for the interrupt handlers. The iMX RT SDK doesn't.

ports/nrf/common-hal/busio/UART.c

@@ -297,7 +297,7 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
 // Read characters.
 size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
     if (nrf_uarte_rx_pin_get(self->uarte->p_reg) == NRF_UARTE_PSEL_DISCONNECTED) {
-        mp_raise_ValueError(translate("No RX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_rx);
     }
 
     uint64_t start_ticks = supervisor_ticks_ms64();
@@ -347,7 +347,7 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t
 // Write characters.
 size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
     if (nrf_uarte_tx_pin_get(self->uarte->p_reg) == NRF_UARTE_PSEL_DISCONNECTED) {
-        mp_raise_ValueError(translate("No TX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_tx);
     }
 
     if (len == 0) {

ports/raspberrypi/boards/adafruit_feather_rp2040_usb_host/board.c

@@ -31,7 +31,6 @@
 
 // Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
 
-usb_host_port_obj_t _host_port;
 digitalio_digitalinout_obj_t _host_power;
 
 void board_init(void) {
@@ -39,5 +38,5 @@ void board_init(void) {
     common_hal_digitalio_digitalinout_never_reset(&_host_power);
     common_hal_digitalio_digitalinout_switch_to_output(&_host_power, true, DRIVE_MODE_PUSH_PULL);
 
-    common_hal_usb_host_port_construct(&_host_port, &pin_GPIO16, &pin_GPIO17);
+    common_hal_usb_host_port_construct(&pin_GPIO16, &pin_GPIO17);
 }

ports/raspberrypi/common-hal/busio/UART.c

@@ -211,7 +211,7 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
 // Write characters.
 size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
     if (self->tx_pin == NO_PIN) {
-        mp_raise_ValueError(translate("No TX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_tx);
     }
 
     if (self->rs485_dir_pin != NO_PIN) {
@@ -239,7 +239,7 @@ size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data,
 // Read characters.
 size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
     if (self->rx_pin == NO_PIN) {
-        mp_raise_ValueError(translate("No RX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_rx);
     }
 
     if (len == 0) {

ports/raspberrypi/common-hal/usb_host/Port.c

@@ -45,7 +45,7 @@
 
 #include "supervisor/serial.h"
 
-bool usb_host_init;
+usb_host_port_obj_t usb_host_instance;
 
 STATIC PIO pio_instances[2] = {pio0, pio1};
 volatile bool _core1_ready = false;
@@ -102,10 +102,23 @@ STATIC bool _has_program_room(uint8_t pio_index, uint8_t program_size) {
     return pio_can_add_program(pio, &program_struct);
 }
 
-void common_hal_usb_host_port_construct(usb_host_port_obj_t *self, const mcu_pin_obj_t *dp, const mcu_pin_obj_t *dm) {
+usb_host_port_obj_t *common_hal_usb_host_port_construct(const mcu_pin_obj_t *dp, const mcu_pin_obj_t *dm) {
     if (dp->number + 1 != dm->number) {
         raise_ValueError_invalid_pins();
     }
+    usb_host_port_obj_t *self = &usb_host_instance;
+
+    // Return the singleton if given the same pins.
+    if (self->dp != NULL) {
+        if (self->dp != dp || self->dm != dm) {
+            mp_raise_msg_varg(&mp_type_RuntimeError, translate("%q in use"), MP_QSTR_usb_host);
+        }
+        return self;
+    }
+
+    assert_pin_free(dp);
+    assert_pin_free(dm);
+
     pio_usb_configuration_t pio_cfg = PIO_USB_DEFAULT_CONFIG;
     pio_cfg.skip_alarm_pool = true;
     pio_cfg.pin_dp = dp->number;
@@ -122,6 +135,10 @@ void common_hal_usb_host_port_construct(usb_host_port_obj_t *self, const mcu_pin
         mp_raise_RuntimeError(translate("All dma channels in use"));
     }
 
+    self->base.type = &usb_host_port_type;
+    self->dp = dp;
+    self->dm = dm;
+
     PIO tx_pio = pio_instances[pio_cfg.pio_tx_num];
     pio_cfg.sm_tx = pio_claim_unused_sm(tx_pio, false);
     PIO rx_pio = pio_instances[pio_cfg.pio_rx_num];
@@ -151,15 +168,5 @@ void common_hal_usb_host_port_construct(usb_host_port_obj_t *self, const mcu_pin
     tuh_configure(TUH_OPT_RHPORT, TUH_CFGID_RPI_PIO_USB_CONFIGURATION, &pio_cfg);
     tuh_init(TUH_OPT_RHPORT);
 
-    self->init = true;
+    return self;
-    usb_host_init = true;
-}
-
-void common_hal_usb_host_port_deinit(usb_host_port_obj_t *self) {
-    self->init = false;
-    usb_host_init = false;
-}
-
-bool common_hal_usb_host_port_deinited(usb_host_port_obj_t *self) {
-    return !self->init;
 }

ports/raspberrypi/common-hal/usb_host/Port.h

@@ -30,9 +30,6 @@
 
 typedef struct {
     mp_obj_base_t base;
-    bool init;
+    const mcu_pin_obj_t *dp;
+    const mcu_pin_obj_t *dm;
 } usb_host_port_obj_t;
-
-// Cheater state so that the usb module knows if it should return the TinyUSB
-// state.
-extern bool usb_host_init;

ports/silabs/common-hal/busio/I2C.c

@@ -72,7 +72,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
             common_hal_mcu_pin_claim(sda);
             in_used = true;
         } else {
-            mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+            mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
         }
     } else {
         raise_ValueError_invalid_pins();

ports/silabs/common-hal/busio/SPI.c

@@ -95,7 +95,7 @@ void common_hal_busio_spi_construct(busio_spi_obj_t *self,
                 mp_raise_ValueError(translate("SPI init error"));
             }
         } else {
-            mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+            mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
         }
     } else {
         raise_ValueError_invalid_pins();

ports/silabs/common-hal/busio/UART.c

@@ -131,7 +131,7 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
             context = self;
 
         } else {
-            mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+            mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
         }
 
     } else {

ports/stm/common-hal/busio/I2C.c

@@ -117,7 +117,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
         I2Cx = mcu_i2c_banks[self->sda->periph_index - 1];
     } else {
         if (i2c_taken) {
-            mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+            mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
         } else {
             raise_ValueError_invalid_pins();
         }

ports/stm/common-hal/busio/SPI.c

@@ -160,7 +160,7 @@ STATIC int check_pins(busio_spi_obj_t *self,
     }
 
     if (spi_taken) {
-        mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+        mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
     } else {
         raise_ValueError_invalid_pin();
     }
@@ -347,7 +347,7 @@ void common_hal_busio_spi_unlock(busio_spi_obj_t *self) {
 bool common_hal_busio_spi_write(busio_spi_obj_t *self,
     const uint8_t *data, size_t len) {
     if (self->mosi == NULL) {
-        mp_raise_ValueError(translate("No MOSI pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
     }
     HAL_StatusTypeDef result = HAL_SPI_Transmit(&self->handle, (uint8_t *)data, (uint16_t)len, HAL_MAX_DELAY);
     return result == HAL_OK;
@@ -356,9 +356,9 @@ bool common_hal_busio_spi_write(busio_spi_obj_t *self,
 bool common_hal_busio_spi_read(busio_spi_obj_t *self,
     uint8_t *data, size_t len, uint8_t write_value) {
     if (self->miso == NULL && !self->half_duplex) {
-        mp_raise_ValueError(translate("No MISO pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     } else if (self->half_duplex && self->mosi == NULL) {
-        mp_raise_ValueError(translate("No MOSI pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
     }
     HAL_StatusTypeDef result = HAL_OK;
     if ((!self->half_duplex && self->mosi == NULL) || (self->half_duplex && self->mosi != NULL && self->miso == NULL)) {
@@ -372,8 +372,11 @@ bool common_hal_busio_spi_read(busio_spi_obj_t *self,
 
 bool common_hal_busio_spi_transfer(busio_spi_obj_t *self,
     const uint8_t *data_out, uint8_t *data_in, size_t len) {
-    if (self->miso == NULL || self->mosi == NULL) {
+    if (self->mosi == NULL && data_out != NULL) {
-        mp_raise_ValueError(translate("Missing MISO or MOSI pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
+    }
+    if (self->miso == NULL && data_in != NULL) {
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     }
     HAL_StatusTypeDef result = HAL_SPI_TransmitReceive(&self->handle,
         (uint8_t *)data_out, data_in, (uint16_t)len,HAL_MAX_DELAY);

ports/stm/common-hal/busio/UART.c

@@ -293,7 +293,7 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
 
 size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
     if (self->rx == NULL) {
-        mp_raise_ValueError(translate("No RX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_rx);
     }
 
     uint64_t start_ticks = supervisor_ticks_ms64();
@@ -327,7 +327,7 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t
 // Write characters.
 size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
     if (self->tx == NULL) {
-        mp_raise_ValueError(translate("No TX pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_tx);
     }
 
     // Disable UART IRQ to avoid resource hazards in Rx IRQ handler

ports/stm/common-hal/canio/CAN.c

@@ -69,7 +69,7 @@ void common_hal_canio_can_construct(canio_can_obj_t *self, const mcu_pin_obj_t *
     }
 
     if (reserved_can[periph_index]) {
-        mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+        mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
     }
 
     const uint32_t can_frequency = 42000000;

ports/stm/common-hal/sdioio/SDCard.c

@@ -113,7 +113,7 @@ STATIC int check_pins(sdioio_sdcard_obj_t *self,
     }
 
     if (sdio_taken) {
-        mp_raise_ValueError(translate("Hardware busy, try alternative pins"));
+        mp_raise_ValueError(translate("Hardware in use, try alternative pins"));
     } else {
         raise_ValueError_invalid_pin();
     }

py/qstr.c

@@ -289,18 +289,18 @@ mp_uint_t PLACE_IN_ITCM(qstr_hash)(qstr q) {
     return attr.hash;
 }
 
-size_t qstr_len(qstr q) {
+size_t PLACE_IN_ITCM(qstr_len)(qstr q) {
     qstr_attr_t attr;
     find_qstr(q, &attr);
     return attr.len;
 }
 
-const char *qstr_str(qstr q) {
+const char *PLACE_IN_ITCM(qstr_str)(qstr q) {
     qstr_attr_t attr;
     return find_qstr(q, &attr);
 }
 
-const byte *qstr_data(qstr q, size_t *len) {
+const byte *PLACE_IN_ITCM(qstr_data)(qstr q, size_t *len) {
     qstr_attr_t attr;
     const char *qd = find_qstr(q, &attr);
     *len = attr.len;

py/runtime.c

@@ -1655,6 +1655,13 @@ NORETURN MP_COLD void mp_raise_RuntimeError(const compressed_string_t *msg) {
     mp_raise_msg(&mp_type_RuntimeError, msg);
 }
 
+NORETURN MP_COLD void mp_raise_RuntimeError_varg(const compressed_string_t *fmt, ...) {
+    va_list argptr;
+    va_start(argptr,fmt);
+    mp_raise_msg_vlist(&mp_type_RuntimeError, fmt, argptr);
+    va_end(argptr);
+}
+
 NORETURN MP_COLD void mp_raise_ImportError(const compressed_string_t *msg) {
     mp_raise_msg(&mp_type_ImportError, msg);
 }

py/runtime.h

@@ -219,6 +219,7 @@ NORETURN void mp_raise_TypeError(const compressed_string_t *msg);
 NORETURN void mp_raise_TypeError_varg(const compressed_string_t *fmt, ...);
 NORETURN void mp_raise_AttributeError(const compressed_string_t *msg);
 NORETURN void mp_raise_RuntimeError(const compressed_string_t *msg);
+NORETURN void mp_raise_RuntimeError_varg(const compressed_string_t *fmt, ...);
 NORETURN void mp_raise_ImportError(const compressed_string_t *msg);
 NORETURN void mp_raise_IndexError(const compressed_string_t *msg);
 NORETURN void mp_raise_IndexError_varg(const compressed_string_t *msg, ...);

shared-bindings/bitmaptools/__init__.c

@@ -949,6 +949,132 @@ STATIC mp_obj_t bitmaptools_obj_draw_circle(size_t n_args, const mp_obj_t *pos_a
 
 MP_DEFINE_CONST_FUN_OBJ_KW(bitmaptools_draw_circle_obj, 0, bitmaptools_obj_draw_circle);
 
+//|     def blit(
+//|         dest_bitmap: displayio.Bitmap,
+//|         source_bitmap: displayio.Bitmap,
+//|         x: int,
+//|         y: int,
+//|         *,
+//|         x1: int,
+//|         y1: int,
+//|         x2: int,
+//|         y2: int,
+//|         skip_source_index: int,
+//|         skip_dest_index: int
+//|     ) -> None:
+//|         """Inserts the source_bitmap region defined by rectangular boundaries
+//|                     (x1,y1) and (x2,y2) into the bitmap at the specified (x,y) location.
+//|
+//|         :param bitmap dest_bitmap: Destination bitmap that the area will be copied into.
+//|         :param bitmap source_bitmap: Source bitmap that contains the graphical region to be copied
+//|         :param int x: Horizontal pixel location in bitmap where source_bitmap upper-left
+//|                       corner will be placed
+//|         :param int y: Vertical pixel location in bitmap where source_bitmap upper-left
+//|                       corner will be placed
+//|         :param int x1: Minimum x-value for rectangular bounding box to be copied from the source bitmap
+//|         :param int y1: Minimum y-value for rectangular bounding box to be copied from the source bitmap
+//|         :param int x2: Maximum x-value (exclusive) for rectangular bounding box to be copied from the source bitmap
+//|         :param int y2: Maximum y-value (exclusive) for rectangular bounding box to be copied from the source bitmap
+//|         :param int skip_source_index: bitmap palette index in the source that will not be copied,
+//|                                set to None to copy all pixels
+//|         :param int skip_dest_index: bitmap palette index in the destination bitmap that will not get overwritten
+//|                                 by the pixels from the source"""
+//|         ...
+//|
+STATIC mp_obj_t bitmaptools_obj_blit(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
+    enum {ARG_destination, ARG_source, ARG_x, ARG_y, ARG_x1, ARG_y1, ARG_x2, ARG_y2, ARG_skip_source_index, ARG_skip_dest_index};
+    static const mp_arg_t allowed_args[] = {
+        {MP_QSTR_dest_bitmap, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} },
+        {MP_QSTR_source_bitmap, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} },
+        {MP_QSTR_x, MP_ARG_REQUIRED | MP_ARG_INT, {.u_obj = MP_OBJ_NULL} },
+        {MP_QSTR_y, MP_ARG_REQUIRED | MP_ARG_INT, {.u_obj = MP_OBJ_NULL} },
+        {MP_QSTR_x1, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
+        {MP_QSTR_y1, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
+        {MP_QSTR_x2, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, // None convert to source->width
+        {MP_QSTR_y2, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, // None convert to source->height
+        {MP_QSTR_skip_source_index, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
+        {MP_QSTR_skip_dest_index, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
+    };
+    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
+    // mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+    mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+
+    // displayio_bitmap_t *self = MP_OBJ_TO_PTR(pos_args[0]);
+    displayio_bitmap_t *destination = mp_arg_validate_type(args[ARG_destination].u_obj, &displayio_bitmap_type, MP_QSTR_dest_bitmap);
+    // check_for_deinit(destination);
+
+    // Check x,y are within self (target) bitmap boundary
+    int16_t x = mp_arg_validate_int_range(args[ARG_x].u_int, 0, MAX(0, destination->width - 1), MP_QSTR_x);
+    int16_t y = mp_arg_validate_int_range(args[ARG_y].u_int, 0, MAX(0, destination->height - 1), MP_QSTR_y);
+
+
+    displayio_bitmap_t *source = mp_arg_validate_type(args[ARG_source].u_obj, &displayio_bitmap_type, MP_QSTR_source_bitmap);
+
+
+    // ensure that the target bitmap (self) has at least as many `bits_per_value` as the source
+    if (destination->bits_per_value < source->bits_per_value) {
+        mp_raise_ValueError(translate("source palette too large"));
+    }
+
+    // Check x1,y1,x2,y2 are within source bitmap boundary
+    int16_t x1 = mp_arg_validate_int_range(args[ARG_x1].u_int, 0, MAX(0, source->width - 1), MP_QSTR_x1);
+    int16_t y1 = mp_arg_validate_int_range(args[ARG_y1].u_int, 0, MAX(0, source->height - 1), MP_QSTR_y1);
+    int16_t x2, y2;
+    // if x2 or y2 is None, then set as the maximum size of the source bitmap
+    if (args[ARG_x2].u_obj == mp_const_none) {
+        x2 = source->width;
+    } else {
+        x2 = mp_arg_validate_int_range(mp_obj_get_int(args[ARG_x2].u_obj), 0, source->width, MP_QSTR_x2);
+    }
+    // int16_t y2;
+    if (args[ARG_y2].u_obj == mp_const_none) {
+        y2 = source->height;
+    } else {
+        y2 = mp_arg_validate_int_range(mp_obj_get_int(args[ARG_y2].u_obj), 0, source->height, MP_QSTR_y2);
+    }
+
+    // Ensure x1 < x2 and y1 < y2
+    if (x1 > x2) {
+        int16_t temp = x2;
+        x2 = x1;
+        x1 = temp;
+    }
+    if (y1 > y2) {
+        int16_t temp = y2;
+        y2 = y1;
+        y1 = temp;
+    }
+
+    uint32_t skip_source_index;
+    bool skip_source_index_none; // flag whether skip_value was None
+
+    if (args[ARG_skip_source_index].u_obj == mp_const_none) {
+        skip_source_index = 0;
+        skip_source_index_none = true;
+    } else {
+        skip_source_index = mp_obj_get_int(args[ARG_skip_source_index].u_obj);
+        skip_source_index_none = false;
+    }
+
+    uint32_t skip_dest_index;
+    bool skip_dest_index_none; // flag whether skip_self_value was None
+
+    if (args[ARG_skip_dest_index].u_obj == mp_const_none) {
+        skip_dest_index = 0;
+        skip_dest_index_none = true;
+    } else {
+        skip_dest_index = mp_obj_get_int(args[ARG_skip_dest_index].u_obj);
+        skip_dest_index_none = false;
+    }
+
+    common_hal_bitmaptools_blit(destination, source, x, y, x1, y1, x2, y2, skip_source_index, skip_source_index_none, skip_dest_index,
+        skip_dest_index_none);
+
+    return mp_const_none;
+}
+MP_DEFINE_CONST_FUN_OBJ_KW(bitmaptools_blit_obj, 1, bitmaptools_obj_blit);
+
+
 STATIC const mp_rom_map_elem_t bitmaptools_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_bitmaptools) },
     { MP_ROM_QSTR(MP_QSTR_readinto), MP_ROM_PTR(&bitmaptools_readinto_obj) },
@@ -960,6 +1086,7 @@ STATIC const mp_rom_map_elem_t bitmaptools_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_draw_line), MP_ROM_PTR(&bitmaptools_draw_line_obj) },
     { MP_ROM_QSTR(MP_QSTR_draw_polygon), MP_ROM_PTR(&bitmaptools_draw_polygon_obj) },
     { MP_ROM_QSTR(MP_QSTR_draw_circle), MP_ROM_PTR(&bitmaptools_draw_circle_obj) },
+    { MP_ROM_QSTR(MP_QSTR_blit), MP_ROM_PTR(&bitmaptools_blit_obj) },
     { MP_ROM_QSTR(MP_QSTR_dither), MP_ROM_PTR(&bitmaptools_dither_obj) },
     { MP_ROM_QSTR(MP_QSTR_DitherAlgorithm), MP_ROM_PTR(&bitmaptools_dither_algorithm_type) },
 };

shared-bindings/bitmaptools/__init__.h

@@ -69,6 +69,10 @@ void common_hal_bitmaptools_draw_circle(displayio_bitmap_t *destination,
     int16_t radius,
     uint32_t value);
 
+void common_hal_bitmaptools_blit(displayio_bitmap_t *destination, displayio_bitmap_t *source, int16_t x, int16_t y,
+    int16_t x1, int16_t y1, int16_t x2, int16_t y2,
+    uint32_t skip_source_index, bool skip_source_index_none, uint32_t skip_dest_index, bool skip_dest_index_none);
+
 void common_hal_bitmaptools_draw_polygon(displayio_bitmap_t *destination, void *xs, void *ys, size_t points_len, int point_size, uint32_t value, bool close);
 void common_hal_bitmaptools_readinto(displayio_bitmap_t *self, mp_obj_t *file, int element_size, int bits_per_pixel, bool reverse_pixels_in_word, bool swap_bytes, bool reverse_rows);
 void common_hal_bitmaptools_arrayblit(displayio_bitmap_t *self, void *data, int element_size, int x1, int y1, int x2, int y2, bool skip_specified, uint32_t skip_index);

shared-bindings/displayio/Bitmap.c

@@ -116,6 +116,21 @@ MP_DEFINE_CONST_FUN_OBJ_1(displayio_bitmap_get_height_obj, displayio_bitmap_obj_
 MP_PROPERTY_GETTER(displayio_bitmap_height_obj,
     (mp_obj_t)&displayio_bitmap_get_height_obj);
 
+//|     bits_per_value: int
+//|     """Bits per Pixel of the bitmap. (read only)"""
+STATIC mp_obj_t displayio_bitmap_obj_get_bits_per_value(mp_obj_t self_in) {
+    displayio_bitmap_t *self = MP_OBJ_TO_PTR(self_in);
+
+    check_for_deinit(self);
+    return MP_OBJ_NEW_SMALL_INT(common_hal_displayio_bitmap_get_bits_per_value(self));
+}
+
+MP_DEFINE_CONST_FUN_OBJ_1(displayio_bitmap_get_bits_per_value_obj, displayio_bitmap_obj_get_bits_per_value);
+
+MP_PROPERTY_GETTER(displayio_bitmap_bits_per_value_obj,
+    (mp_obj_t)&displayio_bitmap_get_bits_per_value_obj);
+
+
 //|     def __getitem__(self, index: Union[Tuple[int, int], int]) -> int:
 //|         """Returns the value at the given index. The index can either be an x,y tuple or an int equal
 //|         to ``y * width + x``.
@@ -186,109 +201,6 @@ STATIC mp_obj_t bitmap_subscr(mp_obj_t self_in, mp_obj_t index_obj, mp_obj_t val
     return mp_const_none;
 }
 
-//|     def blit(
-//|         self,
-//|         x: int,
-//|         y: int,
-//|         source_bitmap: Bitmap,
-//|         *,
-//|         x1: int,
-//|         y1: int,
-//|         x2: int,
-//|         y2: int,
-//|         skip_index: int
-//|     ) -> None:
-//|         """Inserts the source_bitmap region defined by rectangular boundaries
-//|                     (x1,y1) and (x2,y2) into the bitmap at the specified (x,y) location.
-//|
-//|         :param int x: Horizontal pixel location in bitmap where source_bitmap upper-left
-//|                       corner will be placed
-//|         :param int y: Vertical pixel location in bitmap where source_bitmap upper-left
-//|                       corner will be placed
-//|         :param bitmap source_bitmap: Source bitmap that contains the graphical region to be copied
-//|         :param int x1: Minimum x-value for rectangular bounding box to be copied from the source bitmap
-//|         :param int y1: Minimum y-value for rectangular bounding box to be copied from the source bitmap
-//|         :param int x2: Maximum x-value (exclusive) for rectangular bounding box to be copied from the source bitmap
-//|         :param int y2: Maximum y-value (exclusive) for rectangular bounding box to be copied from the source bitmap
-//|         :param int skip_index: bitmap palette index in the source that will not be copied,
-//|                                set to None to copy all pixels"""
-//|         ...
-STATIC mp_obj_t displayio_bitmap_obj_blit(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
-    enum {ARG_x, ARG_y, ARG_source, ARG_x1, ARG_y1, ARG_x2, ARG_y2, ARG_skip_index};
-    static const mp_arg_t allowed_args[] = {
-        {MP_QSTR_x, MP_ARG_REQUIRED | MP_ARG_INT, {.u_obj = MP_OBJ_NULL} },
-        {MP_QSTR_y, MP_ARG_REQUIRED | MP_ARG_INT, {.u_obj = MP_OBJ_NULL} },
-        {MP_QSTR_source_bitmap, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} },
-        {MP_QSTR_x1, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
-        {MP_QSTR_y1, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
-        {MP_QSTR_x2, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, // None convert to source->width
-        {MP_QSTR_y2, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, // None convert to source->height
-        {MP_QSTR_skip_index, MP_ARG_OBJ | MP_ARG_KW_ONLY, {.u_obj = mp_const_none} },
-    };
-    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
-    mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
-
-    displayio_bitmap_t *self = MP_OBJ_TO_PTR(pos_args[0]);
-    check_for_deinit(self);
-
-    // Check x,y are within self (target) bitmap boundary
-    int16_t x = mp_arg_validate_int_range(args[ARG_x].u_int, 0, MAX(0, self->width - 1), MP_QSTR_x);
-    int16_t y = mp_arg_validate_int_range(args[ARG_y].u_int, 0, MAX(0, self->height - 1), MP_QSTR_y);
-
-    displayio_bitmap_t *source = mp_arg_validate_type(args[ARG_source].u_obj, &displayio_bitmap_type, MP_QSTR_source_bitmap);
-
-
-    // ensure that the target bitmap (self) has at least as many `bits_per_value` as the source
-    if (self->bits_per_value < source->bits_per_value) {
-        mp_raise_ValueError(translate("source palette too large"));
-    }
-
-    // Check x1,y1,x2,y2 are within source bitmap boundary
-    int16_t x1 = mp_arg_validate_int_range(args[ARG_x1].u_int, 0, MAX(0, source->width - 1), MP_QSTR_x1);
-    int16_t y1 = mp_arg_validate_int_range(args[ARG_y1].u_int, 0, MAX(0, source->height - 1), MP_QSTR_y1);
-    int16_t x2, y2;
-    // if x2 or y2 is None, then set as the maximum size of the source bitmap
-    if (args[ARG_x2].u_obj == mp_const_none) {
-        x2 = source->width;
-    } else {
-        x2 = mp_arg_validate_int_range(mp_obj_get_int(args[ARG_x2].u_obj), 0, source->width, MP_QSTR_x2);
-    }
-    // int16_t y2;
-    if (args[ARG_y2].u_obj == mp_const_none) {
-        y2 = source->height;
-    } else {
-        y2 = mp_arg_validate_int_range(mp_obj_get_int(args[ARG_y2].u_obj), 0, source->height, MP_QSTR_y2);
-    }
-
-    // Ensure x1 < x2 and y1 < y2
-    if (x1 > x2) {
-        int16_t temp = x2;
-        x2 = x1;
-        x1 = temp;
-    }
-    if (y1 > y2) {
-        int16_t temp = y2;
-        y2 = y1;
-        y1 = temp;
-    }
-
-    uint32_t skip_index;
-    bool skip_index_none; // flag whether skip_value was None
-
-    if (args[ARG_skip_index].u_obj == mp_const_none) {
-        skip_index = 0;
-        skip_index_none = true;
-    } else {
-        skip_index = mp_obj_get_int(args[ARG_skip_index].u_obj);
-        skip_index_none = false;
-    }
-
-    common_hal_displayio_bitmap_blit(self, x, y, source, x1, y1, x2, y2, skip_index, skip_index_none);
-
-    return mp_const_none;
-}
-MP_DEFINE_CONST_FUN_OBJ_KW(displayio_bitmap_blit_obj, 1, displayio_bitmap_obj_blit);
-
 //|     def fill(self, value: int) -> None:
 //|         """Fills the bitmap with the supplied palette index value."""
 //|         ...
@@ -363,7 +275,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(displayio_bitmap_deinit_obj, displayio_bitmap_obj_dein
 STATIC const mp_rom_map_elem_t displayio_bitmap_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_bitmap_height_obj) },
     { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_bitmap_width_obj) },
-    { MP_ROM_QSTR(MP_QSTR_blit), MP_ROM_PTR(&displayio_bitmap_blit_obj) },
+    { MP_ROM_QSTR(MP_QSTR_bits_per_value), MP_ROM_PTR(&displayio_bitmap_bits_per_value_obj) },
     { MP_ROM_QSTR(MP_QSTR_fill), MP_ROM_PTR(&displayio_bitmap_fill_obj) },
     { MP_ROM_QSTR(MP_QSTR_dirty), MP_ROM_PTR(&displayio_bitmap_dirty_obj) },
     { MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&displayio_bitmap_deinit_obj) },

shared-bindings/displayio/Bitmap.h

@@ -42,9 +42,6 @@ uint16_t common_hal_displayio_bitmap_get_height(displayio_bitmap_t *self);
 uint16_t common_hal_displayio_bitmap_get_width(displayio_bitmap_t *self);
 uint32_t common_hal_displayio_bitmap_get_bits_per_value(displayio_bitmap_t *self);
 void common_hal_displayio_bitmap_set_pixel(displayio_bitmap_t *bitmap, int16_t x, int16_t y, uint32_t value);
-void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16_t y, displayio_bitmap_t *source,
-    int16_t x1, int16_t y1, int16_t x2, int16_t y2,
-    uint32_t skip_index, bool skip_index_none);
 uint32_t common_hal_displayio_bitmap_get_pixel(displayio_bitmap_t *bitmap, int16_t x, int16_t y);
 void common_hal_displayio_bitmap_fill(displayio_bitmap_t *bitmap, uint32_t value);
 int common_hal_displayio_bitmap_get_buffer(displayio_bitmap_t *self, mp_buffer_info_t *bufinfo, mp_uint_t flags);

shared-bindings/displayio/FourWire.c

@@ -114,7 +114,7 @@ STATIC mp_obj_t displayio_fourwire_obj_reset(mp_obj_t self_in) {
     displayio_fourwire_obj_t *self = self_in;
 
     if (!common_hal_displayio_fourwire_reset(self)) {
-        mp_raise_RuntimeError(translate("no reset pin available"));
+        mp_raise_RuntimeError_varg(translate("No %q pin"), MP_QSTR_reset);
     }
     return mp_const_none;
 }

shared-bindings/displayio/I2CDisplay.c

@@ -91,7 +91,7 @@ STATIC mp_obj_t displayio_i2cdisplay_obj_reset(mp_obj_t self_in) {
     displayio_i2cdisplay_obj_t *self = self_in;
 
     if (!common_hal_displayio_i2cdisplay_reset(self)) {
-        mp_raise_RuntimeError(translate("no reset pin available"));
+        mp_raise_RuntimeError_varg(translate("No %q pin"), MP_QSTR_reset);
     }
     return mp_const_none;
 }

shared-bindings/keypad/ShiftRegisterKeys.c

@@ -41,10 +41,10 @@
 //|         self,
 //|         *,
 //|         clock: microcontroller.Pin,
-//|         data: microcontroller.Pin,
+//|         data: Union[microcontroller.Pin, Sequence[microcontroller.Pin]],
 //|         latch: microcontroller.Pin,
 //|         value_to_latch: bool = True,
-//|         key_count: int,
+//|         key_count: Union[int, Sequence[int]],
 //|         value_when_pressed: bool,
 //|         interval: float = 0.020,
 //|         max_events: int = 64
@@ -53,15 +53,17 @@
 //|         Create a `Keys` object that will scan keys attached to a parallel-in serial-out shift register
 //|         like the 74HC165 or CD4021.
 //|         Note that you may chain shift registers to load in as many values as you need.
+//|         Furthermore, you can put multiple shift registers in parallel and share clock and latch.
 //|
 //|         Key number 0 is the first (or more properly, the zero-th) bit read. In the
 //|         74HC165, this bit is labeled ``Q7``. Key number 1 will be the value of ``Q6``, etc.
+//|         With multiple data pins, key numbers of the next pin are sequentially to the current pin.
 //|
 //|         An `EventQueue` is created when this object is created and is available in the `events` attribute.
 //|
 //|         :param microcontroller.Pin clock: The shift register clock pin.
 //|           The shift register should clock on a low-to-high transition.
-//|         :param microcontroller.Pin data: the incoming shift register data pin
+//|         :param Union[microcontroller.Pin, Sequence[microcontroller.Pin]] data: the incoming shift register data pin(s)
 //|         :param microcontroller.Pin latch:
 //|           Pin used to latch parallel data going into the shift register.
 //|         :param bool value_to_latch: Pin state to latch data being read.
@@ -69,7 +71,7 @@
 //|           ``False`` if the data is latched when ``latch`` goes low.
 //|           The default is ``True``, which is how the 74HC165 operates. The CD4021 latch is the opposite.
 //|           Once the data is latched, it will be shifted out by toggling the clock pin.
-//|         :param int key_count: number of data lines to clock in
+//|         :param Union[int, Sequence[int]] key_count: number of data lines to clock in (per data pin)
 //|         :param bool value_when_pressed: ``True`` if the pin reads high when the key is pressed.
 //|           ``False`` if the pin reads low (is grounded) when the key is pressed.
 //|         :param float interval: Scan keys no more often than ``interval`` to allow for debouncing.
@@ -91,7 +93,7 @@ STATIC mp_obj_t keypad_shiftregisterkeys_make_new(const mp_obj_type_t *type, siz
         { MP_QSTR_data, MP_ARG_KW_ONLY | MP_ARG_REQUIRED | MP_ARG_OBJ },
         { MP_QSTR_latch, MP_ARG_KW_ONLY | MP_ARG_REQUIRED | MP_ARG_OBJ },
         { MP_QSTR_value_to_latch, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = true} },
-        { MP_QSTR_key_count, MP_ARG_KW_ONLY | MP_ARG_REQUIRED | MP_ARG_INT },
+        { MP_QSTR_key_count, MP_ARG_KW_ONLY | MP_ARG_REQUIRED | MP_ARG_OBJ },
         { MP_QSTR_value_when_pressed, MP_ARG_REQUIRED | MP_ARG_KW_ONLY | MP_ARG_BOOL },
         { MP_QSTR_interval, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} },
         { MP_QSTR_max_events, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 64} },
@@ -99,21 +101,64 @@ STATIC mp_obj_t keypad_shiftregisterkeys_make_new(const mp_obj_type_t *type, siz
     mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
     mp_arg_parse_all_kw_array(n_args, n_kw, all_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
 
+    size_t num_data_pins;
+
+    if (mp_obj_is_type(args[ARG_data].u_obj, &mcu_pin_type)) {
+        num_data_pins = 1;
+    } else {
+        num_data_pins = (size_t)MP_OBJ_SMALL_INT_VALUE(mp_obj_len(args[ARG_data].u_obj));
+    }
+
+    const mcu_pin_obj_t *data_pins_array[num_data_pins];
+
+    if (mp_obj_is_type(args[ARG_data].u_obj, &mcu_pin_type)) {
+        const mcu_pin_obj_t *datapin = validate_obj_is_free_pin(args[ARG_data].u_obj, MP_QSTR_data);
+        data_pins_array[0] = datapin;
+    } else {
+        for (size_t pin = 0; pin < num_data_pins; pin++) {
+            const mcu_pin_obj_t *datapin =
+                validate_obj_is_free_pin(mp_obj_subscr(args[ARG_data].u_obj, MP_OBJ_NEW_SMALL_INT(pin), MP_OBJ_SENTINEL), MP_QSTR_data);
+            data_pins_array[pin] = datapin;
+        }
+    }
+
+    size_t num_key_counts;
+
+    if (mp_obj_is_int(args[ARG_key_count].u_obj)) {
+        num_key_counts = 1;
+    } else {
+        num_key_counts = (size_t)MP_OBJ_SMALL_INT_VALUE(mp_obj_len(args[ARG_key_count].u_obj));
+    }
+
+    mp_arg_validate_length(num_key_counts, num_data_pins, MP_QSTR_key_count);
+
+    size_t key_count_array[num_key_counts];
+
+    if (mp_obj_is_int(args[ARG_key_count].u_obj)) {
+        const size_t key_count = (size_t)mp_arg_validate_int_min(args[ARG_key_count].u_int, 1, MP_QSTR_key_count);
+        key_count_array[0] = key_count;
+    } else {
+        for (size_t kc = 0; kc < num_key_counts; kc++) {
+            mp_int_t mpint = mp_obj_get_int(mp_obj_subscr(args[ARG_key_count].u_obj, MP_OBJ_NEW_SMALL_INT(kc), MP_OBJ_SENTINEL));
+            const size_t key_count = (size_t)mp_arg_validate_int_min(mpint, 1, MP_QSTR_key_count);
+            key_count_array[kc] = key_count;
+        }
+    }
+
     const mcu_pin_obj_t *clock = validate_obj_is_free_pin(args[ARG_clock].u_obj, MP_QSTR_clock);
-    const mcu_pin_obj_t *data = validate_obj_is_free_pin(args[ARG_data].u_obj, MP_QSTR_data);
     const mcu_pin_obj_t *latch = validate_obj_is_free_pin(args[ARG_latch].u_obj, MP_QSTR_latch);
     const bool value_to_latch = args[ARG_value_to_latch].u_bool;
 
-    const size_t key_count = (size_t)mp_arg_validate_int_min(args[ARG_key_count].u_int, 1, MP_QSTR_key_count);
     const bool value_when_pressed = args[ARG_value_when_pressed].u_bool;
     const mp_float_t interval =
         mp_arg_validate_obj_float_non_negative(args[ARG_interval].u_obj, 0.020f, MP_QSTR_interval);
     const size_t max_events = (size_t)mp_arg_validate_int_min(args[ARG_max_events].u_int, 1, MP_QSTR_max_events);
 
     common_hal_keypad_shiftregisterkeys_construct(
-        self, clock, data, latch, value_to_latch, key_count, value_when_pressed, interval, max_events);
+        self, clock, num_data_pins, data_pins_array, latch, value_to_latch, num_key_counts, key_count_array, value_when_pressed, interval, max_events);
 
     return MP_OBJ_FROM_PTR(self);
+
     #else
     mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_ShiftRegisterKeys);
     #endif
@@ -155,7 +200,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(keypad_shiftregisterkeys___exit___obj
 //|         ...
 
 //|     key_count: int
-//|     """The number of keys that are being scanned. (read-only)
+//|     """The total number of keys that are being scanned. (read-only)
 //|     """
 
 //|     events: EventQueue

shared-bindings/keypad/ShiftRegisterKeys.h

@@ -32,7 +32,7 @@
 
 extern const mp_obj_type_t keypad_shiftregisterkeys_type;
 
-void common_hal_keypad_shiftregisterkeys_construct(keypad_shiftregisterkeys_obj_t *self, const mcu_pin_obj_t *clock_pin, const mcu_pin_obj_t *data_pin, const mcu_pin_obj_t *latch_pin, bool value_to_latch, size_t key_count, bool value_when_pressed, mp_float_t interval, size_t max_events);
+void common_hal_keypad_shiftregisterkeys_construct(keypad_shiftregisterkeys_obj_t *self, const mcu_pin_obj_t *clock_pin, mp_uint_t num_data_pins, const mcu_pin_obj_t *data_pins[], const mcu_pin_obj_t *latch_pin, bool value_to_latch, size_t num_key_count, size_t key_counts[], bool value_when_pressed, mp_float_t interval, size_t max_events);
 
 void common_hal_keypad_shiftregisterkeys_deinit(keypad_shiftregisterkeys_obj_t *self);
 

shared-bindings/paralleldisplay/ParallelBus.c

@@ -122,7 +122,7 @@ STATIC mp_obj_t paralleldisplay_parallelbus_obj_reset(mp_obj_t self_in) {
     paralleldisplay_parallelbus_obj_t *self = self_in;
 
     if (!common_hal_paralleldisplay_parallelbus_reset(self)) {
-        mp_raise_RuntimeError(translate("no reset pin available"));
+        mp_raise_RuntimeError_varg(translate("No %q pin"), MP_QSTR_reset);
     }
     return mp_const_none;
 }

shared-bindings/ssl/SSLContext.c

@@ -108,7 +108,10 @@ STATIC mp_obj_t ssl_sslcontext_load_verify_locations(size_t n_args, const mp_obj
     mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
     mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
 
-    const char *cadata = mp_obj_str_get_str(args[ARG_cadata].u_obj);
+    const char *cadata = NULL;
+    if (args[ARG_cadata].u_obj != mp_const_none) {
+        cadata = mp_obj_str_get_str(args[ARG_cadata].u_obj);
+    }
 
     common_hal_ssl_sslcontext_load_verify_locations(self, cadata);
     return mp_const_none;

shared-bindings/synthio/Synthesizer.c

@@ -31,6 +31,7 @@
 #include "py/binary.h"
 #include "py/objproperty.h"
 #include "py/runtime.h"
+#include "py/enum.h"
 #include "shared-bindings/util.h"
 #include "shared-bindings/synthio/Biquad.h"
 #include "shared-bindings/synthio/Synthesizer.h"
@@ -256,7 +257,9 @@ MP_PROPERTY_GETTER(synthio_synthesizer_sample_rate_obj,
     (mp_obj_t)&synthio_synthesizer_get_sample_rate_obj);
 
 //|     pressed: NoteSequence
-//|     """A sequence of the currently pressed notes (read-only property)"""
+//|     """A sequence of the currently pressed notes (read-only property).
+//|
+//|     This does not include notes in the release phase of the envelope."""
 //|
 STATIC mp_obj_t synthio_synthesizer_obj_get_pressed(mp_obj_t self_in) {
     synthio_synthesizer_obj_t *self = MP_OBJ_TO_PTR(self_in);
@@ -268,6 +271,23 @@ MP_DEFINE_CONST_FUN_OBJ_1(synthio_synthesizer_get_pressed_obj, synthio_synthesiz
 MP_PROPERTY_GETTER(synthio_synthesizer_pressed_obj,
     (mp_obj_t)&synthio_synthesizer_get_pressed_obj);
 
+//|     def note_info(self, note: Note) -> Tuple[Optional[EnvelopeState], float]:
+//|         """Get info about a note's current envelope state
+//|
+//|         If the note is currently playing (including in the release phase), the returned value gives the current envelope state and the current envelope value.
+//|
+//|         If the note is not playing on this synthesizer, returns the tuple ``(None, 0.0)``."""
+STATIC mp_obj_t synthio_synthesizer_obj_note_info(mp_obj_t self_in, mp_obj_t note) {
+    synthio_synthesizer_obj_t *self = MP_OBJ_TO_PTR(self_in);
+    check_for_deinit(self);
+    mp_float_t vol = MICROPY_FLOAT_CONST(0.0);
+    envelope_state_e state = common_hal_synthio_synthesizer_note_info(self, note, &vol);
+    return MP_OBJ_NEW_TUPLE(
+        cp_enum_find(&synthio_note_state_type, state),
+        mp_obj_new_float(vol));
+}
+MP_DEFINE_CONST_FUN_OBJ_2(synthio_synthesizer_note_info_obj, synthio_synthesizer_obj_note_info);
+
 //|     blocks: List[BlockInput]
 //|     """A list of blocks to advance whether or not they are associated with a playing note.
 //|
@@ -417,6 +437,7 @@ STATIC const mp_rom_map_elem_t synthio_synthesizer_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_sample_rate), MP_ROM_PTR(&synthio_synthesizer_sample_rate_obj) },
     { MP_ROM_QSTR(MP_QSTR_max_polyphony), MP_ROM_INT(CIRCUITPY_SYNTHIO_MAX_CHANNELS) },
     { MP_ROM_QSTR(MP_QSTR_pressed), MP_ROM_PTR(&synthio_synthesizer_pressed_obj) },
+    { MP_ROM_QSTR(MP_QSTR_note_info), MP_ROM_PTR(&synthio_synthesizer_note_info_obj) },
     { MP_ROM_QSTR(MP_QSTR_blocks), MP_ROM_PTR(&synthio_synthesizer_blocks_obj) },
 };
 STATIC MP_DEFINE_CONST_DICT(synthio_synthesizer_locals_dict, synthio_synthesizer_locals_dict_table);

shared-bindings/synthio/Synthesizer.h

@@ -45,3 +45,4 @@ void common_hal_synthio_synthesizer_retrigger(synthio_synthesizer_obj_t *self, m
 void common_hal_synthio_synthesizer_release_all(synthio_synthesizer_obj_t *self);
 mp_obj_t common_hal_synthio_synthesizer_get_pressed_notes(synthio_synthesizer_obj_t *self);
 mp_obj_t common_hal_synthio_synthesizer_get_blocks(synthio_synthesizer_obj_t *self);
+envelope_state_e common_hal_synthio_synthesizer_note_info(synthio_synthesizer_obj_t *self, mp_obj_t note, mp_float_t *vol_out);

shared-bindings/synthio/__init__.c

@@ -45,6 +45,32 @@
 
 #include "shared-module/synthio/LFO.h"
 
+//| class EnvelopeState:
+//|     ATTACK: EnvelopeState
+//|     """The note is in its attack phase"""
+//|     DECAY: EnvelopeState
+//|     """The note is in its decay phase"""
+//|     SUSTAIN: EnvelopeState
+//|     """The note is in its sustain phase"""
+//|     RELEASE: EnvelopeState
+//|     """The note is in its release phase"""
+//|
+MAKE_ENUM_VALUE(synthio_note_state_type, note_state, ATTACK, SYNTHIO_ENVELOPE_STATE_ATTACK);
+MAKE_ENUM_VALUE(synthio_note_state_type, note_state, DECAY, SYNTHIO_ENVELOPE_STATE_DECAY);
+MAKE_ENUM_VALUE(synthio_note_state_type, note_state, SUSTAIN, SYNTHIO_ENVELOPE_STATE_SUSTAIN);
+MAKE_ENUM_VALUE(synthio_note_state_type, note_state, RELEASE, SYNTHIO_ENVELOPE_STATE_RELEASE);
+
+MAKE_ENUM_MAP(synthio_note_state) {
+    MAKE_ENUM_MAP_ENTRY(note_state, ATTACK),
+    MAKE_ENUM_MAP_ENTRY(note_state, DECAY),
+    MAKE_ENUM_MAP_ENTRY(note_state, SUSTAIN),
+    MAKE_ENUM_MAP_ENTRY(note_state, RELEASE),
+};
+
+STATIC MP_DEFINE_CONST_DICT(synthio_note_state_locals_dict, synthio_note_state_locals_table);
+MAKE_PRINTER(synthio, synthio_note_state);
+MAKE_ENUM_TYPE(synthio, EnvelopeState, synthio_note_state);
+
 #define default_attack_time (MICROPY_FLOAT_CONST(0.1))
 #define default_decay_time (MICROPY_FLOAT_CONST(0.05))
 #define default_release_time (MICROPY_FLOAT_CONST(0.2))
@@ -316,6 +342,7 @@ STATIC const mp_rom_map_elem_t synthio_module_globals_table[] = {
     { MP_ROM_QSTR(MP_QSTR_MathOperation), MP_ROM_PTR(&synthio_math_operation_type) },
     { MP_ROM_QSTR(MP_QSTR_MidiTrack), MP_ROM_PTR(&synthio_miditrack_type) },
     { MP_ROM_QSTR(MP_QSTR_Note), MP_ROM_PTR(&synthio_note_type) },
+    { MP_ROM_QSTR(MP_QSTR_EnvelopeState), MP_ROM_PTR(&synthio_note_state_type) },
     { MP_ROM_QSTR(MP_QSTR_LFO), MP_ROM_PTR(&synthio_lfo_type) },
     { MP_ROM_QSTR(MP_QSTR_Synthesizer), MP_ROM_PTR(&synthio_synthesizer_type) },
     { MP_ROM_QSTR(MP_QSTR_from_file), MP_ROM_PTR(&synthio_from_file_obj) },

shared-bindings/synthio/__init__.h

@@ -29,10 +29,16 @@
 #include "py/objnamedtuple.h"
 #include "py/enum.h"
 
+typedef enum {
+    SYNTHIO_ENVELOPE_STATE_ATTACK, SYNTHIO_ENVELOPE_STATE_DECAY,
+    SYNTHIO_ENVELOPE_STATE_SUSTAIN, SYNTHIO_ENVELOPE_STATE_RELEASE
+} envelope_state_e;
+
 typedef enum synthio_bend_mode_e {
     SYNTHIO_BEND_MODE_STATIC, SYNTHIO_BEND_MODE_VIBRATO, SYNTHIO_BEND_MODE_SWEEP, SYNTHIO_BEND_MODE_SWEEP_IN
 } synthio_bend_mode_t;
 
+extern const mp_obj_type_t synthio_note_state_type;
 extern const cp_enum_obj_t bend_mode_VIBRATO_obj;
 extern const mp_obj_type_t synthio_bend_mode_type;
 typedef struct synthio_synth synthio_synth_t;

shared-bindings/usb_host/Port.c

@@ -35,59 +35,36 @@
 //|
 //|     def __init__(self, dp: microcontroller.Pin, dm: microcontroller.Pin) -> None:
 //|         """Create a USB host port on the given pins. Access attached devices
-//|         through the `usb` module. Keep this object referenced while
+//|         through the `usb` module.
-//|         interacting with devices, otherwise they will be disconnected.
+//|
+//|         The resulting object lives longer than the CircuitPython VM so that
+//|         USB devices such as keyboards can continue to be used. Subsequent
+//|         calls to this constructor will return the same object and *not*
+//|         reinitialize the USB host port. It will raise an exception when
+//|         given different arguments from the first successful call.
 //|
 //|         :param ~microcontroller.Pin dp: The data plus pin
 //|         :param ~microcontroller.Pin dm: The data minus pin
 //|         """
 //|         ...
+//|
 STATIC mp_obj_t usb_host_port_make_new(const mp_obj_type_t *type,
     size_t n_args, size_t n_kw, const mp_obj_t *args) {
     // check number of arguments
     mp_arg_check_num(n_args, n_kw, 2, 2, false);
 
-    const mcu_pin_obj_t *dp = validate_obj_is_free_pin(args[0], MP_QSTR_dp);
+    const mcu_pin_obj_t *dp = validate_obj_is_pin(args[0], MP_QSTR_dp);
-    const mcu_pin_obj_t *dm = validate_obj_is_free_pin(args[1], MP_QSTR_dm);
+    const mcu_pin_obj_t *dm = validate_obj_is_pin(args[1], MP_QSTR_dm);
 
-    usb_host_port_obj_t *self = m_new_obj(usb_host_port_obj_t);
+    // Pin in use checks happen in the implementation so they can be ignored
-    self->base.type = &usb_host_port_type;
+    // when returning the singleton.
-    common_hal_usb_host_port_construct(self, dp, dm);
+
+    usb_host_port_obj_t *self = common_hal_usb_host_port_construct(dp, dm);
 
     return (mp_obj_t)self;
 }
 
-//|     def deinit(self) -> None:
-//|         """Turn off the USB host port and release the pins for other use."""
-//|         ...
-STATIC mp_obj_t usb_host_port_obj_deinit(mp_obj_t self_in) {
-    usb_host_port_obj_t *self = MP_OBJ_TO_PTR(self_in);
-    common_hal_usb_host_port_deinit(self);
-    return mp_const_none;
-}
-MP_DEFINE_CONST_FUN_OBJ_1(usb_host_port_deinit_obj, usb_host_port_obj_deinit);
-
-//|     def __enter__(self) -> Port:
-//|         """No-op used by Context Managers."""
-//|         ...
-//  Provided by context manager helper.
-
-//|     def __exit__(self) -> None:
-//|         """Automatically deinitializes the hardware when exiting a context. See
-//|         :ref:`lifetime-and-contextmanagers` for more info."""
-//|         ...
-//|
-STATIC mp_obj_t usb_host_port_obj___exit__(size_t n_args, const mp_obj_t *args) {
-    (void)n_args;
-    common_hal_usb_host_port_deinit(MP_OBJ_TO_PTR(args[0]));
-    return mp_const_none;
-}
-STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(usb_host_port_obj___exit___obj, 4, 4, usb_host_port_obj___exit__);
-
 STATIC const mp_rom_map_elem_t usb_host_port_locals_dict_table[] = {
-    { MP_ROM_QSTR(MP_QSTR_deinit),             MP_ROM_PTR(&usb_host_port_deinit_obj) },
-    { MP_ROM_QSTR(MP_QSTR___enter__),          MP_ROM_PTR(&default___enter___obj) },
-    { MP_ROM_QSTR(MP_QSTR___exit__),           MP_ROM_PTR(&usb_host_port_obj___exit___obj) },
 };
 
 STATIC MP_DEFINE_CONST_DICT(usb_host_port_locals_dict, usb_host_port_locals_dict_table);

shared-bindings/usb_host/Port.h

@@ -35,8 +35,10 @@
 
 extern const mp_obj_type_t usb_host_port_type;
 
-void common_hal_usb_host_port_construct(usb_host_port_obj_t *self, const mcu_pin_obj_t *dp, const mcu_pin_obj_t *dm);
+// This is unique to common_hal constructs because it returns a globally stored
-void common_hal_usb_host_port_deinit(usb_host_port_obj_t *self);
+// object instead of taking on in that may be on the heap. This allows the
-bool common_hal_usb_host_port_deinited(usb_host_port_obj_t *self);
+// method to check the internals of the global object against the given arguments
+// to determine whether to return the singleton or raise an exception.
+usb_host_port_obj_t *common_hal_usb_host_port_construct(const mcu_pin_obj_t *dp, const mcu_pin_obj_t *dm);
 
 #endif  // MICROPY_INCLUDED_SHARED_BINDINGS_USB_HOST_PORT_H

shared-module/bitbangio/SPI.c

@@ -123,7 +123,7 @@ void shared_module_bitbangio_spi_unlock(bitbangio_spi_obj_t *self) {
 // Writes out the given data.
 bool shared_module_bitbangio_spi_write(bitbangio_spi_obj_t *self, const uint8_t *data, size_t len) {
     if (len > 0 && !self->has_mosi) {
-        mp_raise_ValueError(translate("No MOSI pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
     }
     uint32_t delay_half = self->delay_half;
 
@@ -178,7 +178,7 @@ bool shared_module_bitbangio_spi_write(bitbangio_spi_obj_t *self, const uint8_t
 // Reads in len bytes while outputting zeroes.
 bool shared_module_bitbangio_spi_read(bitbangio_spi_obj_t *self, uint8_t *data, size_t len, uint8_t write_data) {
     if (len > 0 && !self->has_miso) {
-        mp_raise_ValueError(translate("No MISO pin"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     }
 
     uint32_t delay_half = self->delay_half;
@@ -245,8 +245,11 @@ bool shared_module_bitbangio_spi_read(bitbangio_spi_obj_t *self, uint8_t *data,
 
 // transfer
 bool shared_module_bitbangio_spi_transfer(bitbangio_spi_obj_t *self, const uint8_t *dout, uint8_t *din, size_t len) {
-    if (len > 0 && (!self->has_mosi || !self->has_miso)) {
+    if (!self->has_mosi && dout != NULL) {
-        mp_raise_ValueError(translate("Cannot transfer without MOSI and MISO pins"));
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_mosi);
+    }
+    if (!self->has_miso && din != NULL) {
+        mp_raise_ValueError_varg(translate("No %q pin"), MP_QSTR_miso);
     }
     uint32_t delay_half = self->delay_half;
 

shared-module/bitmaptools/__init__.c

@@ -982,3 +982,71 @@ void common_hal_bitmaptools_draw_circle(displayio_bitmap_t *destination,
 
     draw_circle(destination, x, y, radius, value);
 }
+
+void common_hal_bitmaptools_blit(displayio_bitmap_t *destination, displayio_bitmap_t *source, int16_t x, int16_t y,
+    int16_t x1, int16_t y1, int16_t x2, int16_t y2, uint32_t skip_source_index, bool skip_source_index_none, uint32_t skip_dest_index,
+    bool skip_dest_index_none) {
+
+    if (destination->read_only) {
+        mp_raise_RuntimeError(translate("Read-only"));
+    }
+    // Copy region of "source" bitmap into "destination" bitmap at location x,y in the "destination"
+    // If skip_value is encountered in the source bitmap, it will not be copied.
+    // If skip_value is `None`, then all pixels are copied.
+    // This function assumes input checks were performed for pixel index entries.
+
+    // Update the dirty area
+    int16_t dirty_x_max = (x + (x2 - x1));
+    if (dirty_x_max > destination->width) {
+        dirty_x_max = destination->width;
+    }
+    int16_t dirty_y_max = y + (y2 - y1);
+    if (dirty_y_max > destination->height) {
+        dirty_y_max = destination->height;
+    }
+
+    displayio_area_t a = { x, y, dirty_x_max, dirty_y_max, NULL};
+    displayio_bitmap_set_dirty_area(destination, &a);
+
+    bool x_reverse = false;
+    bool y_reverse = false;
+
+    // Add reverse direction option to protect blitting of destination bitmap back into destination bitmap
+    if (x > x1) {
+        x_reverse = true;
+    }
+    if (y > y1) {
+        y_reverse = true;
+    }
+
+    // simplest version - use internal functions for get/set pixels
+    for (int16_t i = 0; i < (x2 - x1); i++) {
+
+        const int xs_index = x_reverse ? ((x2) - i - 1) : x1 + i; // x-index into the source bitmap
+        const int xd_index = x_reverse ? ((x + (x2 - x1)) - i - 1) : x + i; // x-index into the destination bitmap
+
+        if ((xd_index >= 0) && (xd_index < destination->width)) {
+            for (int16_t j = 0; j < (y2 - y1); j++) {
+
+                const int ys_index = y_reverse ? ((y2) - j - 1) : y1 + j;  // y-index into the source bitmap
+                const int yd_index = y_reverse ? ((y + (y2 - y1)) - j - 1) : y + j; // y-index into the destination bitmap
+
+                if ((yd_index >= 0) && (yd_index < destination->height)) {
+                    uint32_t value = common_hal_displayio_bitmap_get_pixel(source, xs_index, ys_index);
+                    if (skip_dest_index_none) { // if skip_dest_index is none, then only check source skip
+                        if ((skip_source_index_none) || (value != skip_source_index)) {   // write if skip_value_none is True
+                            displayio_bitmap_write_pixel(destination, xd_index, yd_index, value);
+                        }
+                    } else { // check dest_value index against skip_dest_index and skip if they match
+                        uint32_t dest_value = common_hal_displayio_bitmap_get_pixel(destination, xd_index, yd_index);
+                        if (dest_value != skip_dest_index) {
+                            if ((skip_source_index_none) || (value != skip_source_index)) {   // write if skip_value_none is True
+                                displayio_bitmap_write_pixel(destination, xd_index, yd_index, value);
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

shared-module/displayio/Bitmap.c

@@ -174,63 +174,6 @@ void displayio_bitmap_write_pixel(displayio_bitmap_t *self, int16_t x, int16_t y
     }
 }
 
-void common_hal_displayio_bitmap_blit(displayio_bitmap_t *self, int16_t x, int16_t y, displayio_bitmap_t *source,
-    int16_t x1, int16_t y1, int16_t x2, int16_t y2, uint32_t skip_index, bool skip_index_none) {
-    if (self->read_only) {
-        mp_raise_RuntimeError(translate("Read-only"));
-    }
-    // Copy region of "source" bitmap into "self" bitmap at location x,y in the "self"
-    // If skip_value is encountered in the source bitmap, it will not be copied.
-    // If skip_value is `None`, then all pixels are copied.
-    // This function assumes input checks were performed for pixel index entries.
-
-    // Update the dirty area
-    int16_t dirty_x_max = (x + (x2 - x1));
-    if (dirty_x_max > self->width) {
-        dirty_x_max = self->width;
-    }
-    int16_t dirty_y_max = y + (y2 - y1);
-    if (dirty_y_max > self->height) {
-        dirty_y_max = self->height;
-    }
-
-    displayio_area_t a = { x, y, dirty_x_max, dirty_y_max, NULL};
-    displayio_bitmap_set_dirty_area(self, &a);
-
-    bool x_reverse = false;
-    bool y_reverse = false;
-
-    // Add reverse direction option to protect blitting of self bitmap back into self bitmap
-    if (x > x1) {
-        x_reverse = true;
-    }
-    if (y > y1) {
-        y_reverse = true;
-    }
-
-    // simplest version - use internal functions for get/set pixels
-    for (int16_t i = 0; i < (x2 - x1); i++) {
-
-        const int xs_index = x_reverse ? ((x2) - i - 1) : x1 + i; // x-index into the source bitmap
-        const int xd_index = x_reverse ? ((x + (x2 - x1)) - i - 1) : x + i; // x-index into the destination bitmap
-
-        if ((xd_index >= 0) && (xd_index < self->width)) {
-            for (int16_t j = 0; j < (y2 - y1); j++) {
-
-                const int ys_index = y_reverse ? ((y2) - j - 1) : y1 + j;  // y-index into the source bitmap
-                const int yd_index = y_reverse ? ((y + (y2 - y1)) - j - 1) : y + j; // y-index into the destination bitmap
-
-                if ((yd_index >= 0) && (yd_index < self->height)) {
-                    uint32_t value = common_hal_displayio_bitmap_get_pixel(source, xs_index, ys_index);
-                    if ((skip_index_none) || (value != skip_index)) {   // write if skip_value_none is True
-                        displayio_bitmap_write_pixel(self, xd_index, yd_index, value);
-                    }
-                }
-            }
-        }
-    }
-}
-
 void common_hal_displayio_bitmap_set_pixel(displayio_bitmap_t *self, int16_t x, int16_t y, uint32_t value) {
     if (self->read_only) {
         mp_raise_RuntimeError(translate("Read-only"));

shared-module/keypad/ShiftRegisterKeys.c

@@ -44,7 +44,7 @@ static keypad_scanner_funcs_t shiftregisterkeys_funcs = {
     .get_key_count = shiftregisterkeys_get_key_count,
 };
 
-void common_hal_keypad_shiftregisterkeys_construct(keypad_shiftregisterkeys_obj_t *self, const mcu_pin_obj_t *clock_pin, const mcu_pin_obj_t *data_pin, const mcu_pin_obj_t *latch_pin, bool value_to_latch, size_t key_count, bool value_when_pressed, mp_float_t interval, size_t max_events) {
+void common_hal_keypad_shiftregisterkeys_construct(keypad_shiftregisterkeys_obj_t *self, const mcu_pin_obj_t *clock_pin, mp_uint_t num_data_pins, const mcu_pin_obj_t *data_pins[], const mcu_pin_obj_t *latch_pin, bool value_to_latch, mp_uint_t num_key_counts, size_t key_counts[], bool value_when_pressed, mp_float_t interval, size_t max_events) {
 
     digitalio_digitalinout_obj_t *clock = m_new_obj(digitalio_digitalinout_obj_t);
     clock->base.type = &digitalio_digitalinout_type;
@@ -52,22 +52,46 @@ void common_hal_keypad_shiftregisterkeys_construct(keypad_shiftregisterkeys_obj_
     common_hal_digitalio_digitalinout_switch_to_output(clock, false, DRIVE_MODE_PUSH_PULL);
     self->clock = clock;
 
-    digitalio_digitalinout_obj_t *data = m_new_obj(digitalio_digitalinout_obj_t);
-    data->base.type = &digitalio_digitalinout_type;
-    common_hal_digitalio_digitalinout_construct(data, data_pin);
-    common_hal_digitalio_digitalinout_switch_to_input(data, PULL_NONE);
-    self->data = data;
-
     digitalio_digitalinout_obj_t *latch = m_new_obj(digitalio_digitalinout_obj_t);
     latch->base.type = &digitalio_digitalinout_type;
 
     common_hal_digitalio_digitalinout_construct(latch, latch_pin);
     common_hal_digitalio_digitalinout_switch_to_output(latch, true, DRIVE_MODE_PUSH_PULL);
     self->latch = latch;
-    self->value_to_latch = value_to_latch;
 
+    mp_obj_t dios[num_data_pins];
+
+    for (size_t i = 0; i < num_data_pins; i++) {
+        digitalio_digitalinout_obj_t *dio = m_new_obj(digitalio_digitalinout_obj_t);
+        dio->base.type = &digitalio_digitalinout_type;
+        common_hal_digitalio_digitalinout_construct(dio, data_pins[i]);
+        common_hal_digitalio_digitalinout_switch_to_input(dio, PULL_NONE);
+        dios[i] = dio;
+    }
+
+    // Allocate a tuple object with the data pins
+    self->data_pins = mp_obj_new_tuple(num_data_pins, dios);
+
+    self->key_counts = (mp_uint_t *)gc_alloc(sizeof(mp_uint_t) * num_key_counts, false, false);
+    self->num_key_counts = num_key_counts;
+
+    // copy to a gc_alloc() and on the fly record pin with largest Shift register
+    mp_uint_t max = 0;
+
+    for (mp_uint_t i = 0; i < self->num_key_counts; i++) {
+        mp_uint_t cnt = key_counts[i];
+
+        if (cnt > max) {
+            max = cnt;
+        }
+
+        self->key_counts[i] = cnt;
+    }
+
+    self->max_key_count = max;
+
+    self->value_to_latch = value_to_latch;
     self->value_when_pressed = value_when_pressed;
-    self->key_count = key_count;
     self->funcs = &shiftregisterkeys_funcs;
 
     keypad_construct_common((keypad_scanner_obj_t *)self, interval, max_events);
@@ -85,18 +109,28 @@ void common_hal_keypad_shiftregisterkeys_deinit(keypad_shiftregisterkeys_obj_t *
     common_hal_digitalio_digitalinout_deinit(self->clock);
     self->clock = MP_ROM_NONE;
 
-    common_hal_digitalio_digitalinout_deinit(self->data);
-    self->data = MP_ROM_NONE;
-
     common_hal_digitalio_digitalinout_deinit(self->latch);
     self->latch = MP_ROM_NONE;
 
+    for (size_t key = 0; key < self->data_pins->len; key++) {
+        common_hal_digitalio_digitalinout_deinit(self->data_pins->items[key]);
+    }
+    self->data_pins = MP_ROM_NONE;
+    self->key_counts = MP_ROM_NONE;
+
     common_hal_keypad_deinit_core(self);
 }
 
 size_t shiftregisterkeys_get_key_count(void *self_in) {
     keypad_shiftregisterkeys_obj_t *self = self_in;
-    return self->key_count;
+
+    size_t total = 0;
+
+    for (mp_uint_t i = 0; i < self->num_key_counts; i++) {
+        total += self->key_counts[i];
+    }
+
+    return total;
 }
 
 static void shiftregisterkeys_scan_now(void *self_in, mp_obj_t timestamp) {
@@ -105,28 +139,44 @@ static void shiftregisterkeys_scan_now(void *self_in, mp_obj_t timestamp) {
     // Latch (freeze) the current state of the input pins.
     common_hal_digitalio_digitalinout_set_value(self->latch, self->value_to_latch);
 
-    const size_t key_count = shiftregisterkeys_get_key_count(self);
+    // Scan for max_key_count bit
-
+    for (mp_uint_t scan_number = 0; scan_number < self->max_key_count; scan_number++) {
-    for (mp_uint_t key_number = 0; key_number < key_count; key_number++) {
-        // Zero-th data appears on on the data pin immediately, without shifting.
         common_hal_digitalio_digitalinout_set_value(self->clock, false);
 
-        // Remember the previous up/down state.
+        // Zero-th data appears on on the data pin immediately, without shifting.
-        const bool previous = self->currently_pressed[key_number];
-        self->previously_pressed[key_number] = previous;
 
-        // Get the current state.
+        // Loop through all the data pins that share the latch
-        const bool current =
+        mp_uint_t index = 0;
-            common_hal_digitalio_digitalinout_get_value(self->data) == self->value_when_pressed;
+
-        self->currently_pressed[key_number] = current;
+        for (mp_uint_t i = 0; i < self->data_pins->len; i++) {
+
+            // When this data pin has less shiftable bits, ignore it
+            if (scan_number >= self->key_counts[i]) {
+                continue;
+            }
+
+            mp_uint_t key_number = scan_number + index;
+
+            // Remember the previous up/down state.
+            const bool previous = self->currently_pressed[key_number];
+            self->previously_pressed[key_number] = previous;
+
+            // Get the current state.
+            const bool current =
+                common_hal_digitalio_digitalinout_get_value(self->data_pins->items[i]) == self->value_when_pressed;
+            self->currently_pressed[key_number] = current;
+
+            // Record any transitions.
+            if (previous != current) {
+                keypad_eventqueue_record(self->events, key_number, current, timestamp);
+            }
+
+            index += self->key_counts[i];
+        }
 
         // Trigger a shift to get the next bit.
         common_hal_digitalio_digitalinout_set_value(self->clock, true);
 
-        // Record any transitions.
-        if (previous != current) {
-            keypad_eventqueue_record(self->events, key_number, current, timestamp);
-        }
     }
 
     // Start reading the input pins again.

shared-module/keypad/ShiftRegisterKeys.h

@@ -37,9 +37,11 @@
 typedef struct {
     KEYPAD_SCANNER_COMMON_FIELDS;
     digitalio_digitalinout_obj_t *clock;
-    digitalio_digitalinout_obj_t *data;
     digitalio_digitalinout_obj_t *latch;
-    size_t key_count;
+    mp_obj_tuple_t *data_pins;
+    mp_uint_t *key_counts;
+    mp_uint_t num_key_counts;
+    mp_uint_t max_key_count;
     bool value_when_pressed;
     bool value_to_latch;
 } keypad_shiftregisterkeys_obj_t;

shared-module/synthio/Synthesizer.c

@@ -185,6 +185,17 @@ mp_obj_t common_hal_synthio_synthesizer_get_pressed_notes(synthio_synthesizer_ob
     return MP_OBJ_FROM_PTR(result);
 }
 
+envelope_state_e common_hal_synthio_synthesizer_note_info(synthio_synthesizer_obj_t *self, mp_obj_t note, mp_float_t *vol_out) {
+    for (int chan = 0; chan < CIRCUITPY_SYNTHIO_MAX_CHANNELS; chan++) {
+        if (self->synth.span.note_obj[chan] == note) {
+            *vol_out = self->synth.envelope_state[chan].level / 32767.;
+            return self->synth.envelope_state[chan].state;
+        }
+    }
+    return (envelope_state_e) - 1;
+}
+
+
 mp_obj_t common_hal_synthio_synthesizer_get_blocks(synthio_synthesizer_obj_t *self) {
     return self->blocks;
 }

shared-module/synthio/__init__.h

@@ -35,6 +35,7 @@
 #define SYNTHIO_FREQUENCY_SHIFT (16)
 
 #include "shared-module/audiocore/__init__.h"
+#include "shared-bindings/synthio/__init__.h"
 
 typedef struct {
     uint16_t dur;
@@ -49,11 +50,6 @@ typedef struct {
     uint16_t attack_level, sustain_level;
 } synthio_envelope_definition_t;
 
-typedef enum {
-    SYNTHIO_ENVELOPE_STATE_ATTACK, SYNTHIO_ENVELOPE_STATE_DECAY,
-    SYNTHIO_ENVELOPE_STATE_SUSTAIN, SYNTHIO_ENVELOPE_STATE_RELEASE
-} envelope_state_e;
-
 typedef struct {
     int16_t level;
     uint16_t substep;

supervisor/shared/usb/tusb_config.h

@@ -152,7 +152,8 @@ extern "C" {
 #endif
 
 #define CFG_TUH_HID                 2
-#define CFG_TUH_HUB                 1
+// 2 hubs so we can support "7 port" hubs which have two internal hubs.
+#define CFG_TUH_HUB                 2
 #define CFG_TUH_CDC                 0
 #define CFG_TUH_MSC                 0
 #define CFG_TUH_VENDOR              0

tests/circuitpython/synthio_note_info.py

@@ -0,0 +1,17 @@
+from synthio import Synthesizer, Note, Envelope
+from audiocore import get_buffer
+
+s = Synthesizer()
+n = Note(440, envelope=Envelope())
+print("{} {:.2f}".format(*s.note_info(n)))
+s.press(n)
+print("press")
+for _ in range(9):
+    print("{} {:.2f}".format(*s.note_info(n)))
+    get_buffer(s)
+
+s.release(n)
+print("release")
+for _ in range(11):
+    print("{} {:.2f}".format(*s.note_info(n)))
+    get_buffer(s)

tests/circuitpython/synthio_note_info.py.exp

@@ -0,0 +1,23 @@
+None 0.00
+press
+synthio.EnvelopeState.ATTACK 0.23
+synthio.EnvelopeState.ATTACK 0.46
+synthio.EnvelopeState.ATTACK 0.70
+synthio.EnvelopeState.ATTACK 0.93
+synthio.EnvelopeState.DECAY 1.00
+synthio.EnvelopeState.DECAY 0.91
+synthio.EnvelopeState.DECAY 0.81
+synthio.EnvelopeState.SUSTAIN 0.80
+synthio.EnvelopeState.SUSTAIN 0.80
+release
+synthio.EnvelopeState.RELEASE 0.80
+synthio.EnvelopeState.RELEASE 0.71
+synthio.EnvelopeState.RELEASE 0.61
+synthio.EnvelopeState.RELEASE 0.52
+synthio.EnvelopeState.RELEASE 0.43
+synthio.EnvelopeState.RELEASE 0.34
+synthio.EnvelopeState.RELEASE 0.24
+synthio.EnvelopeState.RELEASE 0.15
+synthio.EnvelopeState.RELEASE 0.06
+synthio.EnvelopeState.RELEASE 0.00
+None 0.00

tests/cmdline/cmd_showbc.py.exp

@@ -1,7 +1,6 @@
 File cmdline/cmd_showbc.py, code block '<module>' (descriptor: \.\+, bytecode @\.\+ bytes)
 Raw bytecode (code_info_size=\\d\+, bytecode_size=\\d\+):
 ########
-\.\+63
 arg names:
 (N_STATE 3)
 (N_EXC_STACK 0)