diff --git a/docs/library/espnow.rst b/docs/library/espnow.rst index 468eb38418..f821de59aa 100644 --- a/docs/library/espnow.rst +++ b/docs/library/espnow.rst @@ -110,14 +110,14 @@ Configuration .. method:: ESPNow.active([flag]) - Initialise or de-initialise the ESPNow communication protocol depending on + Initialise or de-initialise the ESP-NOW communication protocol depending on the value of the ``flag`` optional argument. .. data:: Arguments: - *flag*: Any python value which can be converted to a boolean type. - - ``True``: Prepare the software and hardware for use of the ESPNow + - ``True``: Prepare the software and hardware for use of the ESP-NOW communication protocol, including: - initialise the ESPNow data structures, @@ -125,7 +125,7 @@ Configuration - invoke esp_now_init() and - register the send and recv callbacks. - - ``False``: De-initialise the Espressif ESPNow software stack + - ``False``: De-initialise the Espressif ESP-NOW software stack (esp_now_deinit()), disable callbacks, deallocate the recv data buffer and deregister all peers. @@ -160,12 +160,12 @@ Configuration `ESPNow.active(True)`. *timeout_ms*: (default=300,000) Default timeout (in milliseconds) - for receiving ESPNOW messages. If *timeout_ms* is less than zero, then + for receiving ESPNow messages. If *timeout_ms* is less than zero, then wait forever. The timeout can also be provided as arg to `recv()`/`irecv()`/`recvinto()`. *rate*: (ESP32 only, IDF>=4.3.0 only) Set the transmission speed for - espnow packets. Must be set to a number from the allowed numeric values + ESPNow packets. Must be set to a number from the allowed numeric values in `enum wifi_phy_rate_t `_. @@ -243,8 +243,8 @@ after reboot/reset). This reduces the reliability of receiving ESP-NOW messages **Note**: A peer will respond with success if its wifi interface is `active()` and set to the same channel as the sender, - regardless of whether it has initialised it's ESP-Now system or is - actively listening for ESP-Now traffic (see the Espressif ESP-Now docs). + regardless of whether it has initialised it's ESP-NOW system or is + actively listening for ESP-NOW traffic (see the Espressif ESP-NOW docs). .. method:: ESPNow.recv([timeout_ms]) @@ -383,15 +383,21 @@ after reboot/reset). This reduces the reliability of receiving ESP-NOW messages Peer Management --------------- -The Espressif ESP-Now software requires that other devices (peers) must be -*registered* before we can `send()` them messages. It is -**not** necessary to *register* a peer to receive a message from that peer. +On ESP32 devices, the Espressif ESP-NOW software requires that other devices +(peers) must be *registered* using `add_peer()` before we can +`send()` them messages (this is *not* enforced on ESP8266 +devices). It is **not** necessary to register a peer to receive an +un-encrypted message from that peer. + +**Encrypted messages**: To receive an *encrypted* message, the receiving device +must first register the sender and use the same encryption keys as the sender +(PMK and LMK) (see `set_pmk()` and `add_peer()`. .. method:: ESPNow.set_pmk(pmk) Set the Primary Master Key (PMK) which is used to encrypt the Local Master - Keys (LMK) for encrypting ESPNow data traffic. If this is not set, a - default PMK is used by the underlying Espressif esp_now software stack. + Keys (LMK) for encrypting messages. If this is not set, a default PMK is + used by the underlying Espressif ESP-NOW software stack. **Note:** messages will only be encrypted if *lmk* is also set in `ESPNow.add_peer()` (see `Security @@ -415,8 +421,9 @@ The Espressif ESP-Now software requires that other devices (peers) must be .. method:: ESPNow.add_peer(mac, [lmk], [channel], [ifidx], [encrypt]) ESPNow.add_peer(mac, param=value, ...) (ESP32 only) - Add/register the provided *mac* address as a peer. Additional parameters - may also be specified as positional or keyword arguments: + Add/register the provided *mac* address as a peer. Additional parameters may + also be specified as positional or keyword arguments (any parameter set to + ``None`` will be set to it's default value): .. data:: Arguments: @@ -444,7 +451,7 @@ The Espressif ESP-Now software requires that other devices (peers) must be - *encrypt*: (ESP32 only) If set to ``True`` data exchanged with this peer will be encrypted with the PMK and LMK. (default = - ``False``) + ``True`` if *lmk* is set to a valid key, else ``False``) **ESP8266**: Keyword args may not be used on the ESP8266. @@ -515,7 +522,8 @@ The Espressif ESP-Now software requires that other devices (peers) must be Modify the parameters of the peer associated with the provided *mac* address. Parameters may be provided as positional or keyword arguments - (see `ESPNow.add_peer()`). + (see `ESPNow.add_peer()`). Any parameter that is not set (or set to + ``None``) will retain the existing value for that parameter. Callback Methods ---------------- @@ -524,14 +532,20 @@ Callback Methods Set a callback function to be called *as soon as possible* after a message has been received from another ESPNow device. The callback function will be called - with the `ESPNow` instance object as an argument, eg: :: + with the `ESPNow` instance object as an argument. For more reliable operation, + it is recommended to read out as many messages as are available when the + callback is invoked and to set the read timeout to zero, eg: :: - def recv_cb(e): - print(e.irecv(0)) - e.irq(recv_cb) + def recv_cb(e): + while True: # Read out all messages waiting in the buffer + mac, msg = e.irecv(0) # Don't wait if no messages left + if mac is None: + return + print(mac, msg) + e.irq(recv_cb) The `irq()` callback method is an alternative method for - processing incoming espnow messages, especially if the data rate is moderate + processing incoming messages, especially if the data rate is moderate and the device is *not too busy* but there are some caveats: - The scheduler stack *can* overflow and callbacks will be missed if @@ -556,11 +570,11 @@ Constants Exceptions ---------- -If the underlying Espressif ESPNow software stack returns an error code, -the MicroPython ESPNow module will raise an ``OSError(errnum, errstring)`` +If the underlying Espressif ESP-NOW software stack returns an error code, +the MicroPython espnow module will raise an ``OSError(errnum, errstring)`` exception where ``errstring`` is set to the name of one of the error codes identified in the -`Espressif ESP-Now docs +`Espressif ESP-NOW docs `_. For example:: @@ -705,12 +719,12 @@ A small async server example:: Broadcast and Multicast ----------------------- -All active ESP-Now clients will receive messages sent to their MAC address and +All active ESPNow clients will receive messages sent to their MAC address and all devices (**except ESP8266 devices**) will also receive messages sent to the *broadcast* MAC address (``b'\xff\xff\xff\xff\xff\xff'``) or any multicast MAC address. -All ESP-Now devices (including ESP8266 devices) can also send messages to the +All ESPNow devices (including ESP8266 devices) can also send messages to the broadcast MAC address or any multicast MAC address. To `send()` a broadcast message, the broadcast (or @@ -739,7 +753,8 @@ point. When an ESP32 or ESP8266 device connects to a Wifi Access Point (see `ESP32 Quickref <../esp32/quickref.html#networking>`__) the following things happen which affect ESPNow communications: -1. Wifi Power-saving Mode is automatically activated and +1. Wifi Power-saving Mode (`network.WLAN.PM_PERFORMANCE`) + is automatically activated and 2. The radio on the esp device changes wifi ``channel`` to match the channel used by the Access Point. @@ -750,27 +765,31 @@ device to turn off the radio periodically (typically for hundreds of milliseconds), making it unreliable in receiving ESPNow messages. This can be resolved by either of: -1. Turning on the AP_IF interface, which will disable the power saving mode. +1. Disabling the power-saving mode on the STA_IF interface; + + - Use ``sta.config(pm=sta.PM_NONE)`` + +2. Turning on the AP_IF interface, which will disable the power saving mode. However, the device will then be advertising an active wifi access point. - You **may** also choose to send your messages via the AP_IF interface, but this is not necessary. - ESP8266 peers must send messages to this AP_IF interface (see below). -2. Configuring ESPNow clients to retry sending messages. +3. Configuring ESPNow clients to retry sending messages. **Receiving messages from an ESP8266 device:** Strangely, an ESP32 device -connected to a wifi network using method 1 or 2 above, will receive ESP-Now +connected to a wifi network using method 1 or 2 above, will receive ESPNow messages sent to the STA_IF MAC address from another ESP32 device, but will **reject** messages from an ESP8266 device!!!. To receive messages from an ESP8266 device, the AP_IF interface must be set to ``active(True)`` **and** messages must be sent to the AP_IF MAC address. -**Managing wifi channels:** Any other espnow devices wishing to communicate with +**Managing wifi channels:** Any other ESPNow devices wishing to communicate with a device which is also connected to a Wifi Access Point MUST use the same -channel. A common scenario is where one espnow device is connected to a wifi +channel. A common scenario is where one ESPNow device is connected to a wifi router and acts as a proxy for messages from a group of sensors connected via -espnow: +ESPNow: **Proxy:** :: @@ -780,7 +799,7 @@ espnow: sta.connect('myssid', 'mypassword') while not sta.isconnected(): # Wait until connected... time.sleep(0.1) - ap.active(True) # Disable power-saving mode + sta.config(pm=sta.PM_NONE) # ..then disable power saving # Print the wifi channel used AFTER finished connecting to access point print("Proxy running on channel:", sta.config("channel")) @@ -850,7 +869,7 @@ Other issues to take care with when using ESPNow with wifi are: - **MicroPython re-scans wifi channels when trying to reconnect:** If the esp device is connected to a Wifi Access Point that goes down, MicroPython will automatically start scanning channels in an attempt to reconnect to the - Access Point. This means espnow messages will be lost while scanning for the + Access Point. This means ESPNow messages will be lost while scanning for the AP. This can be disabled by ``sta.config(reconnects=0)``, which will also disable the automatic reconnection after losing connection.