remove F401 additions to streamline
This commit is contained in:
Hierophect
parent
352bd95f5a
commit
12737e2821
@ -140,12 +140,6 @@ typedef struct {
|
||||
|
||||
//Starter Lines
|
||||
|
||||
#ifdef STM32F401xE
|
||||
#define HAS_DAC 0
|
||||
#define HAS_TRNG 0
|
||||
#include "stm32f401xe/periph.h"
|
||||
#endif
|
||||
|
||||
#ifdef STM32F411xE
|
||||
#define HAS_DAC 0
|
||||
#define HAS_TRNG 0
|
||||
|
||||
@ -1,61 +0,0 @@
|
||||
|
||||
/*
|
||||
* This file is part of the Micro Python project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
void stm32f4_peripherals_clocks_init(void) {
|
||||
//System clock init
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
|
||||
/* Enable Power Control clock */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
clocked below the maximum system frequency, to update the voltage scaling value
|
||||
regarding system frequency refer to product datasheet. */
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
|
||||
|
||||
/* Enable HSE Oscillator and activate PLL with HSE as source */
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
clocks dividers */
|
||||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
|
||||
}
|
||||
@ -1,54 +0,0 @@
|
||||
/*
|
||||
* This file is part of the Micro Python project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "stm32f4xx_hal.h"
|
||||
#include "stm32f4/gpio.h"
|
||||
#include "common-hal/microcontroller/Pin.h"
|
||||
|
||||
void stm32f4_peripherals_gpio_init(void) {
|
||||
//Enable all GPIO for now
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
|
||||
//Never reset pins
|
||||
never_reset_pin_number(2,13); //PC13 anti tamp
|
||||
never_reset_pin_number(2,14); //PC14 OSC32_IN
|
||||
never_reset_pin_number(2,15); //PC15 OSC32_OUT
|
||||
never_reset_pin_number(0,13); //PA13 SWDIO
|
||||
never_reset_pin_number(0,14); //PA14 SWCLK
|
||||
}
|
||||
|
||||
//LEDs are inverted on F411 DISCO
|
||||
void stm32f4_peripherals_status_led(uint8_t led, uint8_t state) {
|
||||
}
|
||||
|
||||
|
||||
@ -1,172 +0,0 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "py/obj.h"
|
||||
#include "py/mphal.h"
|
||||
#include "stm32f4/pins.h"
|
||||
#include "stm32f4/periph.h"
|
||||
|
||||
// I2C
|
||||
|
||||
I2C_TypeDef * mcu_i2c_banks[3] = {I2C1, I2C2, I2C3};
|
||||
|
||||
const mcu_i2c_sda_obj_t mcu_i2c_sda_list[5] = {
|
||||
I2C_SDA(1, 4, &pin_PB07),
|
||||
I2C_SDA(1, 4, &pin_PB09),
|
||||
I2C_SDA(2, 9, &pin_PB03),
|
||||
I2C_SDA(3, 4, &pin_PC09),
|
||||
I2C_SDA(3, 9, &pin_PB04),
|
||||
};
|
||||
|
||||
const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4] = {
|
||||
I2C_SCL(1, 4, &pin_PB06),
|
||||
I2C_SCL(1, 4, &pin_PB08),
|
||||
I2C_SCL(2, 4, &pin_PB10),
|
||||
I2C_SCL(3, 4, &pin_PA08)
|
||||
};
|
||||
|
||||
// SPI
|
||||
|
||||
SPI_TypeDef * mcu_spi_banks[4] = {SPI1, SPI2, SPI3, SPI4};
|
||||
|
||||
const mcu_spi_sck_obj_t mcu_spi_sck_list[9] = {
|
||||
SPI(1, 5, &pin_PA05),
|
||||
SPI(1, 5, &pin_PB03),
|
||||
SPI(2, 5, &pin_PB10),
|
||||
SPI(2, 5, &pin_PB13),
|
||||
SPI(2, 5, &pin_PD03),
|
||||
SPI(3, 6, &pin_PB03),
|
||||
SPI(3, 6, &pin_PC10),
|
||||
SPI(4, 5, &pin_PE02),
|
||||
SPI(4, 5, &pin_PE12),
|
||||
};
|
||||
|
||||
const mcu_spi_mosi_obj_t mcu_spi_mosi_list[9] = {
|
||||
SPI(1, 5, &pin_PA07),
|
||||
SPI(1, 5, &pin_PB05),
|
||||
SPI(2, 5, &pin_PB15),
|
||||
SPI(2, 5, &pin_PC03),
|
||||
SPI(3, 6, &pin_PB05),
|
||||
SPI(3, 6, &pin_PC12),
|
||||
SPI(3, 5, &pin_PD06),
|
||||
SPI(4, 5, &pin_PE06),
|
||||
SPI(4, 5, &pin_PE14),
|
||||
};
|
||||
|
||||
const mcu_spi_miso_obj_t mcu_spi_miso_list[8] = {
|
||||
SPI(1, 5, &pin_PA06),
|
||||
SPI(1, 5, &pin_PB04),
|
||||
SPI(2, 5, &pin_PB14),
|
||||
SPI(2, 5, &pin_PC02),
|
||||
SPI(3, 6, &pin_PB04),
|
||||
SPI(3, 6, &pin_PC11),
|
||||
SPI(4, 5, &pin_PE05),
|
||||
SPI(4, 5, &pin_PE13),
|
||||
};
|
||||
|
||||
const mcu_spi_nss_obj_t mcu_spi_nss_list[9] = {
|
||||
SPI(1, 5, &pin_PA04),
|
||||
SPI(1, 5, &pin_PA15),
|
||||
SPI(2, 5, &pin_PB09),
|
||||
SPI(2, 5, &pin_PB12),
|
||||
SPI(3, 6, &pin_PA04),
|
||||
SPI(3, 6, &pin_PA15),
|
||||
SPI(4, 6, &pin_PB12),
|
||||
SPI(4, 5, &pin_PE04),
|
||||
SPI(4, 5, &pin_PE11),
|
||||
};
|
||||
|
||||
USART_TypeDef * mcu_uart_banks[MAX_UART] = {USART1, USART2, NULL, NULL, NULL, USART6};
|
||||
bool mcu_uart_has_usart[MAX_UART] = {true, true, false, false, false, true};
|
||||
|
||||
const mcu_uart_tx_obj_t mcu_uart_tx_list[6] = {
|
||||
UART(2, 7, &pin_PA02),
|
||||
UART(1, 7, &pin_PA09),
|
||||
UART(6, 8, &pin_PA11),
|
||||
UART(1, 7, &pin_PB06),
|
||||
UART(6, 8, &pin_PC06),
|
||||
UART(2, 7, &pin_PD05),
|
||||
};
|
||||
|
||||
const mcu_uart_rx_obj_t mcu_uart_rx_list[6] = {
|
||||
UART(2, 7, &pin_PA03),
|
||||
UART(1, 7, &pin_PA10),
|
||||
UART(6, 8, &pin_PA12),
|
||||
UART(1, 7, &pin_PB07),
|
||||
UART(6, 8, &pin_PC07),
|
||||
UART(2, 7, &pin_PD06),
|
||||
};
|
||||
|
||||
//Timers
|
||||
//TIM6 and TIM7 are basic timers that are only used by DAC, and don't have pins
|
||||
TIM_TypeDef * mcu_tim_banks[14] = {TIM1, TIM2, TIM3, TIM4, TIM5, NULL, NULL, NULL, TIM9, TIM10,
|
||||
TIM11, NULL, NULL, NULL};
|
||||
|
||||
const mcu_tim_pin_obj_t mcu_tim_pin_list[44] = {
|
||||
TIM(2,1,1,&pin_PA00),
|
||||
TIM(5,2,1,&pin_PA00),
|
||||
TIM(2,1,2,&pin_PA01),
|
||||
TIM(5,2,2,&pin_PA01),
|
||||
TIM(2,1,3,&pin_PA02),
|
||||
TIM(5,2,3,&pin_PA02),
|
||||
TIM(2,1,4,&pin_PA03),
|
||||
TIM(5,2,4,&pin_PA03),
|
||||
TIM(9,3,1,&pin_PA02),
|
||||
TIM(9,3,2,&pin_PA03),
|
||||
TIM(3,2,1,&pin_PA06),
|
||||
TIM(3,2,2,&pin_PA07),
|
||||
TIM(1,1,1,&pin_PA08),
|
||||
TIM(1,1,2,&pin_PA09),
|
||||
TIM(1,1,3,&pin_PA10),
|
||||
TIM(1,1,4,&pin_PA11),
|
||||
TIM(2,1,1,&pin_PA15),
|
||||
TIM(3,2,3,&pin_PB00),
|
||||
TIM(3,2,4,&pin_PB01),
|
||||
TIM(2,1,2,&pin_PB03),
|
||||
TIM(3,2,1,&pin_PB04),
|
||||
TIM(3,2,2,&pin_PB05),
|
||||
TIM(4,2,1,&pin_PB06),
|
||||
TIM(4,2,2,&pin_PB07),
|
||||
TIM(4,2,3,&pin_PB08),
|
||||
TIM(10,2,1,&pin_PB08),
|
||||
TIM(4,2,4,&pin_PB09),
|
||||
TIM(11,2,1,&pin_PB09),
|
||||
TIM(2,1,3,&pin_PB10),
|
||||
TIM(3,2,1,&pin_PC06),
|
||||
TIM(3,2,2,&pin_PC07),
|
||||
TIM(3,2,3,&pin_PC08),
|
||||
TIM(3,2,4,&pin_PC09),
|
||||
TIM(4,2,1,&pin_PD12),
|
||||
TIM(4,2,2,&pin_PD13),
|
||||
TIM(4,2,3,&pin_PD14),
|
||||
TIM(4,2,4,&pin_PD15),
|
||||
TIM(9,3,1,&pin_PE05),
|
||||
TIM(9,3,2,&pin_PE06),
|
||||
TIM(1,1,1,&pin_PE09),
|
||||
TIM(1,1,2,&pin_PE11),
|
||||
TIM(1,1,3,&pin_PE13),
|
||||
TIM(1,1,4,&pin_PE14),
|
||||
};
|
||||
@ -1,57 +0,0 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||
#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||
|
||||
//I2C
|
||||
extern I2C_TypeDef * mcu_i2c_banks[3];
|
||||
|
||||
extern const mcu_i2c_sda_obj_t mcu_i2c_sda_list[5];
|
||||
extern const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4];
|
||||
|
||||
//SPI
|
||||
extern SPI_TypeDef * mcu_spi_banks[4];
|
||||
|
||||
extern const mcu_spi_sck_obj_t mcu_spi_sck_list[9];
|
||||
extern const mcu_spi_mosi_obj_t mcu_spi_mosi_list[9];
|
||||
extern const mcu_spi_miso_obj_t mcu_spi_miso_list[8];
|
||||
extern const mcu_spi_nss_obj_t mcu_spi_nss_list[9];
|
||||
|
||||
//UART
|
||||
extern USART_TypeDef * mcu_uart_banks[MAX_UART];
|
||||
extern bool mcu_uart_has_usart[MAX_UART];
|
||||
|
||||
extern const mcu_uart_tx_obj_t mcu_uart_tx_list[6];
|
||||
extern const mcu_uart_rx_obj_t mcu_uart_rx_list[6];
|
||||
|
||||
//Timers
|
||||
#define TIM_BANK_ARRAY_LEN 14
|
||||
#define TIM_PIN_ARRAY_LEN 44
|
||||
TIM_TypeDef * mcu_tim_banks[TIM_BANK_ARRAY_LEN];
|
||||
const mcu_tim_pin_obj_t mcu_tim_pin_list[TIM_PIN_ARRAY_LEN];
|
||||
|
||||
#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||
@ -1,123 +0,0 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "py/obj.h"
|
||||
#include "py/mphal.h"
|
||||
#include "stm32f4/pins.h"
|
||||
|
||||
const mcu_pin_obj_t pin_PE02 = PIN(4, 2, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE03 = PIN(4, 3, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE04 = PIN(4, 4, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE05 = PIN(4, 5, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE06 = PIN(4, 6, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PC13 = PIN(2, 13, NO_ADC); //anti-tamp
|
||||
const mcu_pin_obj_t pin_PC14 = PIN(2, 14, NO_ADC); //OSC32_IN
|
||||
const mcu_pin_obj_t pin_PC15 = PIN(2, 15, NO_ADC); //OSC32_OUT
|
||||
|
||||
const mcu_pin_obj_t pin_PC00 = PIN(2, 0, ADC_INPUT(ADC_1,10));
|
||||
const mcu_pin_obj_t pin_PC01 = PIN(2, 1, ADC_INPUT(ADC_1,11));
|
||||
const mcu_pin_obj_t pin_PC02 = PIN(2, 2, ADC_INPUT(ADC_1,12));
|
||||
const mcu_pin_obj_t pin_PC03 = PIN(2, 3, ADC_INPUT(ADC_1,13));
|
||||
|
||||
const mcu_pin_obj_t pin_PA00 = PIN(0, 0, ADC_INPUT(ADC_1,0));
|
||||
const mcu_pin_obj_t pin_PA01 = PIN(0, 1, ADC_INPUT(ADC_1,1));
|
||||
const mcu_pin_obj_t pin_PA02 = PIN(0, 2, ADC_INPUT(ADC_1,2));
|
||||
const mcu_pin_obj_t pin_PA03 = PIN(0, 3, ADC_INPUT(ADC_1,3));
|
||||
const mcu_pin_obj_t pin_PA04 = PIN(0, 4, ADC_INPUT(ADC_1,4));
|
||||
const mcu_pin_obj_t pin_PA05 = PIN(0, 5, ADC_INPUT(ADC_1,5));
|
||||
const mcu_pin_obj_t pin_PA06 = PIN(0, 6, ADC_INPUT(ADC_1,6));
|
||||
const mcu_pin_obj_t pin_PA07 = PIN(0, 7, ADC_INPUT(ADC_1,7));
|
||||
|
||||
const mcu_pin_obj_t pin_PC04 = PIN(2, 4, ADC_INPUT(ADC_1,14));
|
||||
const mcu_pin_obj_t pin_PC05 = PIN(2, 5, ADC_INPUT(ADC_1,15));
|
||||
|
||||
const mcu_pin_obj_t pin_PB00 = PIN(1, 0, ADC_INPUT(ADC_1,8));
|
||||
const mcu_pin_obj_t pin_PB01 = PIN(1, 1, ADC_INPUT(ADC_1,9));
|
||||
const mcu_pin_obj_t pin_PB02 = PIN(1, 2, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PE07 = PIN(4, 7, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE08 = PIN(4, 8, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE09 = PIN(4, 9, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE10 = PIN(4, 10, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE11 = PIN(4, 11, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE12 = PIN(4, 12, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE13 = PIN(4, 13, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE14 = PIN(4, 14, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE15 = PIN(4, 15, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PB10 = PIN(1, 10, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB12 = PIN(1, 12, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB13 = PIN(1, 13, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB14 = PIN(1, 14, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB15 = PIN(1, 15, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PD08 = PIN(3, 8, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD09 = PIN(3, 9, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD10 = PIN(3, 10, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD11 = PIN(3, 11, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD12 = PIN(3, 12, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD13 = PIN(3, 13, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD14 = PIN(3, 14, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD15 = PIN(3, 15, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PC06 = PIN(2, 6, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PC07 = PIN(2, 7, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PC08 = PIN(2, 8, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PC09 = PIN(2, 9, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PA08 = PIN(0, 8, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PA09 = PIN(0, 9, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PA10 = PIN(0, 10, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PA11 = PIN(0, 11, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PA12 = PIN(0, 12, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PA13 = PIN(0, 13, NO_ADC); //SWDIO
|
||||
const mcu_pin_obj_t pin_PA14 = PIN(0, 14, NO_ADC); //SWCLK
|
||||
const mcu_pin_obj_t pin_PA15 = PIN(0, 15, NO_ADC); //JTDI
|
||||
|
||||
const mcu_pin_obj_t pin_PC10 = PIN(2, 10, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PC11 = PIN(2, 11, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PC12 = PIN(2, 12, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PD00 = PIN(3, 0, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD01 = PIN(3, 1, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD02 = PIN(3, 2, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD03 = PIN(3, 3, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD04 = PIN(3, 4, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD05 = PIN(3, 5, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD06 = PIN(3, 6, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PD07 = PIN(3, 7, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PB03 = PIN(1, 3, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB04 = PIN(1, 4, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB05 = PIN(1, 5, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB06 = PIN(1, 6, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB07 = PIN(1, 7, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB08 = PIN(1, 8, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PB09 = PIN(1, 9, NO_ADC);
|
||||
|
||||
const mcu_pin_obj_t pin_PE00 = PIN(4, 0, NO_ADC);
|
||||
const mcu_pin_obj_t pin_PE01 = PIN(4, 1, NO_ADC);
|
||||
@ -1,121 +0,0 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PINS_H
|
||||
#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PINS_H
|
||||
|
||||
//Pins in datasheet order: DocID026289 Rev 7 page 38. LQFP100 only
|
||||
//pg 38
|
||||
extern const mcu_pin_obj_t pin_PE02;
|
||||
extern const mcu_pin_obj_t pin_PE03;
|
||||
extern const mcu_pin_obj_t pin_PE04;
|
||||
extern const mcu_pin_obj_t pin_PE05;
|
||||
//pg 39
|
||||
extern const mcu_pin_obj_t pin_PE06;
|
||||
extern const mcu_pin_obj_t pin_PC13;
|
||||
extern const mcu_pin_obj_t pin_PC14;
|
||||
extern const mcu_pin_obj_t pin_PC15;
|
||||
extern const mcu_pin_obj_t pin_PC00;
|
||||
extern const mcu_pin_obj_t pin_PC01;
|
||||
extern const mcu_pin_obj_t pin_PC02;
|
||||
extern const mcu_pin_obj_t pin_PC03;
|
||||
//pg 40
|
||||
extern const mcu_pin_obj_t pin_PA00;
|
||||
extern const mcu_pin_obj_t pin_PA01;
|
||||
extern const mcu_pin_obj_t pin_PA02;
|
||||
extern const mcu_pin_obj_t pin_PA03;
|
||||
extern const mcu_pin_obj_t pin_PA04;
|
||||
extern const mcu_pin_obj_t pin_PA05;
|
||||
extern const mcu_pin_obj_t pin_PA06;
|
||||
extern const mcu_pin_obj_t pin_PA07;
|
||||
//pg 41
|
||||
extern const mcu_pin_obj_t pin_PC04;
|
||||
extern const mcu_pin_obj_t pin_PC05;
|
||||
extern const mcu_pin_obj_t pin_PB00;
|
||||
extern const mcu_pin_obj_t pin_PB01;
|
||||
extern const mcu_pin_obj_t pin_PB02;
|
||||
extern const mcu_pin_obj_t pin_PE07;
|
||||
extern const mcu_pin_obj_t pin_PE08;
|
||||
extern const mcu_pin_obj_t pin_PE09;
|
||||
extern const mcu_pin_obj_t pin_PE10;
|
||||
extern const mcu_pin_obj_t pin_PE11;
|
||||
extern const mcu_pin_obj_t pin_PE12;
|
||||
extern const mcu_pin_obj_t pin_PE13;
|
||||
extern const mcu_pin_obj_t pin_PE14;
|
||||
extern const mcu_pin_obj_t pin_PE15;
|
||||
//pg 42
|
||||
extern const mcu_pin_obj_t pin_PB10;
|
||||
extern const mcu_pin_obj_t pin_PB12;
|
||||
extern const mcu_pin_obj_t pin_PB13;
|
||||
extern const mcu_pin_obj_t pin_PB14;
|
||||
extern const mcu_pin_obj_t pin_PB15;
|
||||
extern const mcu_pin_obj_t pin_PD08;
|
||||
extern const mcu_pin_obj_t pin_PD09;
|
||||
extern const mcu_pin_obj_t pin_PD10;
|
||||
extern const mcu_pin_obj_t pin_PD11;
|
||||
extern const mcu_pin_obj_t pin_PD12;
|
||||
//pg 43
|
||||
extern const mcu_pin_obj_t pin_PD13;
|
||||
extern const mcu_pin_obj_t pin_PD14;
|
||||
extern const mcu_pin_obj_t pin_PD15;
|
||||
extern const mcu_pin_obj_t pin_PC06;
|
||||
extern const mcu_pin_obj_t pin_PC07;
|
||||
extern const mcu_pin_obj_t pin_PC08;
|
||||
extern const mcu_pin_obj_t pin_PC09;
|
||||
extern const mcu_pin_obj_t pin_PA08;
|
||||
extern const mcu_pin_obj_t pin_PA09;
|
||||
//pg 44
|
||||
extern const mcu_pin_obj_t pin_PA10;
|
||||
extern const mcu_pin_obj_t pin_PA11;
|
||||
extern const mcu_pin_obj_t pin_PA12;
|
||||
extern const mcu_pin_obj_t pin_PA13;
|
||||
extern const mcu_pin_obj_t pin_PA14;
|
||||
extern const mcu_pin_obj_t pin_PA15;
|
||||
extern const mcu_pin_obj_t pin_PC10;
|
||||
extern const mcu_pin_obj_t pin_PC11;
|
||||
extern const mcu_pin_obj_t pin_PC12;
|
||||
//pg 45
|
||||
extern const mcu_pin_obj_t pin_PD00;
|
||||
extern const mcu_pin_obj_t pin_PD01;
|
||||
extern const mcu_pin_obj_t pin_PD02;
|
||||
extern const mcu_pin_obj_t pin_PD03;
|
||||
extern const mcu_pin_obj_t pin_PD04;
|
||||
extern const mcu_pin_obj_t pin_PD05;
|
||||
extern const mcu_pin_obj_t pin_PD06;
|
||||
extern const mcu_pin_obj_t pin_PD07;
|
||||
extern const mcu_pin_obj_t pin_PB03;
|
||||
extern const mcu_pin_obj_t pin_PB04;
|
||||
extern const mcu_pin_obj_t pin_PB05;
|
||||
extern const mcu_pin_obj_t pin_PB06;
|
||||
//pg 46
|
||||
extern const mcu_pin_obj_t pin_PB07;
|
||||
extern const mcu_pin_obj_t pin_PB08;
|
||||
extern const mcu_pin_obj_t pin_PB09;
|
||||
extern const mcu_pin_obj_t pin_PE00;
|
||||
extern const mcu_pin_obj_t pin_PE01;
|
||||
|
||||
|
||||
#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PINS_H
|
||||
Loading…
Reference in New Issue
Block a user