drivers, wiznet5k: Add W5200 support.
This commit is contained in:
parent
79d17e3e7d
commit
0c0550bff0
206
drivers/wiznet5k/ethernet/w5200/w5200.c
Normal file
206
drivers/wiznet5k/ethernet/w5200/w5200.c
Normal file
@ -0,0 +1,206 @@
|
||||
// dpgeorge: this file taken from w5500/w5500.c and adapted to W5200
|
||||
|
||||
//*****************************************************************************
|
||||
//
|
||||
//! \file w5500.c
|
||||
//! \brief W5500 HAL Interface.
|
||||
//! \version 1.0.1
|
||||
//! \date 2013/10/21
|
||||
//! \par Revision history
|
||||
//! <2014/05/01> V1.0.2
|
||||
//! 1. Implicit type casting -> Explicit type casting. Refer to M20140501
|
||||
//! Fixed the problem on porting into under 32bit MCU
|
||||
//! Issued by Mathias ClauBen, wizwiki forum ID Think01 and bobh
|
||||
//! Thank for your interesting and serious advices.
|
||||
//! <2013/10/21> 1st Release
|
||||
//! <2013/12/20> V1.0.1
|
||||
//! 1. Remove warning
|
||||
//! 2. WIZCHIP_READ_BUF WIZCHIP_WRITE_BUF in case _WIZCHIP_IO_MODE_SPI_FDM_
|
||||
//! for loop optimized(removed). refer to M20131220
|
||||
//! \author MidnightCow
|
||||
//! \copyright
|
||||
//!
|
||||
//! Copyright (c) 2013, WIZnet Co., LTD.
|
||||
//! All rights reserved.
|
||||
//!
|
||||
//! Redistribution and use in source and binary forms, with or without
|
||||
//! modification, are permitted provided that the following conditions
|
||||
//! are met:
|
||||
//!
|
||||
//! * Redistributions of source code must retain the above copyright
|
||||
//! notice, this list of conditions and the following disclaimer.
|
||||
//! * Redistributions in binary form must reproduce the above copyright
|
||||
//! notice, this list of conditions and the following disclaimer in the
|
||||
//! documentation and/or other materials provided with the distribution.
|
||||
//! * Neither the name of the <ORGANIZATION> nor the names of its
|
||||
//! contributors may be used to endorse or promote products derived
|
||||
//! from this software without specific prior written permission.
|
||||
//!
|
||||
//! THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
//! AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
//! IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
//! ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||||
//! LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
//! CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
//! SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
//! INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
//! CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||||
//! ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
||||
//! THE POSSIBILITY OF SUCH DAMAGE.
|
||||
//
|
||||
//*****************************************************************************
|
||||
|
||||
#include "w5200.h"
|
||||
|
||||
#define SMASK (0x7ff) /* tx buffer mask */
|
||||
#define RMASK (0x7ff) /* rx buffer mask */
|
||||
#define SSIZE (2048) /* max tx buffer size */
|
||||
#define RSIZE (2048) /* max rx buffer size */
|
||||
|
||||
#define TXBUF_BASE (0x8000)
|
||||
#define RXBUF_BASE (0xc000)
|
||||
#define SBASE(sn) (TXBUF_BASE + SSIZE * (sn)) /* tx buffer base for socket sn */
|
||||
#define RBASE(sn) (RXBUF_BASE + RSIZE * (sn)) /* rx buffer base for socket sn */
|
||||
|
||||
uint8_t WIZCHIP_READ(uint32_t AddrSel) {
|
||||
WIZCHIP_CRITICAL_ENTER();
|
||||
WIZCHIP.CS._select();
|
||||
|
||||
uint8_t spi_data[4] = {
|
||||
AddrSel >> 8,
|
||||
AddrSel,
|
||||
0x00,
|
||||
0x01,
|
||||
};
|
||||
WIZCHIP.IF.SPI._write_bytes(spi_data, 4);
|
||||
uint8_t ret;
|
||||
WIZCHIP.IF.SPI._read_bytes(&ret, 1);
|
||||
|
||||
WIZCHIP.CS._deselect();
|
||||
WIZCHIP_CRITICAL_EXIT();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
void WIZCHIP_WRITE(uint32_t AddrSel, uint8_t wb) {
|
||||
WIZCHIP_CRITICAL_ENTER();
|
||||
WIZCHIP.CS._select();
|
||||
|
||||
uint8_t spi_data[5] = {
|
||||
AddrSel >> 8,
|
||||
AddrSel,
|
||||
0x80,
|
||||
0x01,
|
||||
wb,
|
||||
};
|
||||
WIZCHIP.IF.SPI._write_bytes(spi_data, 5);
|
||||
|
||||
WIZCHIP.CS._deselect();
|
||||
WIZCHIP_CRITICAL_EXIT();
|
||||
}
|
||||
|
||||
void WIZCHIP_READ_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len) {
|
||||
WIZCHIP_CRITICAL_ENTER();
|
||||
WIZCHIP.CS._select();
|
||||
|
||||
uint8_t spi_data[4] = {
|
||||
AddrSel >> 8,
|
||||
AddrSel,
|
||||
0x00 | ((len >> 8) & 0x7f),
|
||||
len & 0xff,
|
||||
};
|
||||
WIZCHIP.IF.SPI._write_bytes(spi_data, 4);
|
||||
WIZCHIP.IF.SPI._read_bytes(pBuf, len);
|
||||
|
||||
WIZCHIP.CS._deselect();
|
||||
WIZCHIP_CRITICAL_EXIT();
|
||||
}
|
||||
|
||||
void WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len) {
|
||||
WIZCHIP_CRITICAL_ENTER();
|
||||
WIZCHIP.CS._select();
|
||||
|
||||
uint8_t spi_data[4] = {
|
||||
AddrSel >> 8,
|
||||
AddrSel,
|
||||
0x80 | ((len >> 8) & 0x7f),
|
||||
len & 0xff,
|
||||
};
|
||||
WIZCHIP.IF.SPI._write_bytes(spi_data, 4);
|
||||
WIZCHIP.IF.SPI._write_bytes(pBuf, len);
|
||||
|
||||
WIZCHIP.CS._deselect();
|
||||
WIZCHIP_CRITICAL_EXIT();
|
||||
}
|
||||
|
||||
uint16_t getSn_TX_FSR(uint8_t sn) {
|
||||
uint16_t val = 0, val1 = 0;
|
||||
do {
|
||||
val1 = (WIZCHIP_READ(Sn_TX_FSR(sn)) << 8) | WIZCHIP_READ(Sn_TX_FSR(sn) + 1);
|
||||
if (val1 != 0) {
|
||||
val = (WIZCHIP_READ(Sn_TX_FSR(sn)) << 8) | WIZCHIP_READ(Sn_TX_FSR(sn) + 1);
|
||||
}
|
||||
} while (val != val1);
|
||||
return val;
|
||||
}
|
||||
|
||||
uint16_t getSn_RX_RSR(uint8_t sn) {
|
||||
uint16_t val = 0, val1 = 0;
|
||||
do {
|
||||
val1 = (WIZCHIP_READ(Sn_RX_RSR(sn)) << 8) | WIZCHIP_READ(Sn_RX_RSR(sn) + 1);
|
||||
if (val1 != 0) {
|
||||
val = (WIZCHIP_READ(Sn_RX_RSR(sn)) << 8) | WIZCHIP_READ(Sn_RX_RSR(sn) + 1);
|
||||
}
|
||||
} while (val != val1);
|
||||
return val;
|
||||
}
|
||||
|
||||
void wiz_send_data(uint8_t sn, uint8_t *wizdata, uint16_t len) {
|
||||
if (len == 0) {
|
||||
return;
|
||||
}
|
||||
|
||||
uint16_t ptr = getSn_TX_WR(sn);
|
||||
uint16_t offset = ptr & SMASK;
|
||||
uint32_t addr = offset + SBASE(sn);
|
||||
|
||||
if (offset + len > SSIZE) {
|
||||
// implement wrap-around circular buffer
|
||||
uint16_t size = SSIZE - offset;
|
||||
WIZCHIP_WRITE_BUF(addr, wizdata, size);
|
||||
WIZCHIP_WRITE_BUF(SBASE(sn), wizdata + size, len - size);
|
||||
} else {
|
||||
WIZCHIP_WRITE_BUF(addr, wizdata, len);
|
||||
}
|
||||
|
||||
ptr += len;
|
||||
setSn_TX_WR(sn, ptr);
|
||||
}
|
||||
|
||||
void wiz_recv_data(uint8_t sn, uint8_t *wizdata, uint16_t len) {
|
||||
if (len == 0) {
|
||||
return;
|
||||
}
|
||||
|
||||
uint16_t ptr = getSn_RX_RD(sn);
|
||||
uint16_t offset = ptr & RMASK;
|
||||
uint16_t addr = RBASE(sn) + offset;
|
||||
|
||||
if (offset + len > RSIZE) {
|
||||
// implement wrap-around circular buffer
|
||||
uint16_t size = RSIZE - offset;
|
||||
WIZCHIP_READ_BUF(addr, wizdata, size);
|
||||
WIZCHIP_READ_BUF(RBASE(sn), wizdata + size, len - size);
|
||||
} else {
|
||||
WIZCHIP_READ_BUF(addr, wizdata, len);
|
||||
}
|
||||
|
||||
ptr += len;
|
||||
setSn_RX_RD(sn, ptr);
|
||||
}
|
||||
|
||||
void wiz_recv_ignore(uint8_t sn, uint16_t len) {
|
||||
uint16_t ptr = getSn_RX_RD(sn);
|
||||
ptr += len;
|
||||
setSn_RX_RD(sn, ptr);
|
||||
}
|
2067
drivers/wiznet5k/ethernet/w5200/w5200.h
Normal file
2067
drivers/wiznet5k/ethernet/w5200/w5200.h
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user