diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index c04405b99f..a6e71b519c 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -710,13 +710,7 @@ msgid "CircuitPython core code crashed hard. Whoops!\n" msgstr "" #: supervisor/shared/safe_mode.c -msgid "" -"CircuitPython is in safe mode because you pressed the reset button during " -"boot. Press again to exit safe mode.\n" -msgstr "" - -#: supervisor/shared/safe_mode.c -msgid "CircuitPython was unable to allocate the heap.\n" +msgid "CircuitPython was unable to allocate the heap." msgstr "" #: shared-module/bitbangio/SPI.c @@ -1634,10 +1628,6 @@ msgstr "" msgid "Not playing" msgstr "" -#: main.c -msgid "Not running saved code.\n" -msgstr "" - #: shared-bindings/_bleio/__init__.c msgid "Not settable" msgstr "" @@ -1950,7 +1940,7 @@ msgid "Row entry must be digitalio.DigitalInOut" msgstr "" #: main.c -msgid "Running in safe mode! " +msgid "Running in safe mode! Not running saved code.\n" msgstr "" #: shared-module/sdcardio/SDCard.c @@ -2071,13 +2061,13 @@ msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" -"Please increase the stack size if you know how, or if not:" +"Increase the stack size if you know how. If not:" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The `microcontroller` module was used to boot into safe mode. Press reset to " -"exit safe mode.\n" +"exit safe mode." msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c @@ -2088,7 +2078,7 @@ msgstr "" msgid "" "The microcontroller's power dipped. Make sure your power supply provides\n" "enough power for the whole circuit and press reset (after ejecting " -"CIRCUITPY).\n" +"CIRCUITPY)." msgstr "" #: shared-module/audiomixer/MixerVoice.c @@ -2382,7 +2372,12 @@ msgid "Writes not supported on Characteristic" msgstr "" #: supervisor/shared/safe_mode.c -msgid "You are in safe mode: something unanticipated happened.\n" +msgid "You are in safe mode because:\n" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "" +"You pressed the reset button during boot. Press again to exit safe mode." msgstr "" #: supervisor/shared/safe_mode.c diff --git a/main.c b/main.c index 48373b6834..6904980ae9 100755 --- a/main.c +++ b/main.c @@ -261,18 +261,20 @@ STATIC void print_code_py_status_message(safe_mode_t safe_mode) { serial_write_compressed(translate("Auto-reload is off.\n")); } if (safe_mode != NO_SAFE_MODE) { - serial_write_compressed(translate("Running in safe mode! ")); - serial_write_compressed(translate("Not running saved code.\n")); + serial_write_compressed(translate("Running in safe mode! Not running saved code.\n")); } } STATIC bool run_code_py(safe_mode_t safe_mode) { bool serial_connected_at_start = serial_connected(); + bool printed_safe_mode_message = false; #if CIRCUITPY_AUTORELOAD_DELAY_MS > 0 - serial_write("\n"); - print_code_py_status_message(safe_mode); - print_safe_mode_message(safe_mode); - serial_write("\n"); + if (serial_connected_at_start) { + serial_write("\r\n"); + print_code_py_status_message(safe_mode); + print_safe_mode_message(safe_mode); + printed_safe_mode_message = true; + } #endif pyexec_result_t result; @@ -383,8 +385,11 @@ STATIC bool run_code_py(safe_mode_t safe_mode) { print_code_py_status_message(safe_mode); } - print_safe_mode_message(safe_mode); - serial_write("\n"); + if (!printed_safe_mode_message) { + print_safe_mode_message(safe_mode); + printed_safe_mode_message = true; + } + serial_write("\r\n"); serial_write_compressed(translate("Press any key to enter the REPL. Use CTRL-D to reload.\n")); printed_press_any_key = true; } @@ -521,7 +526,6 @@ STATIC void __attribute__ ((noinline)) run_boot_py(safe_mode_t safe_mode) { usb_set_defaults(); #endif - // TODO(tannewt): Re-add support for flashing boot error output. if (ok_to_run) { bool found_boot = maybe_run_list(boot_py_filenames, NULL); (void) found_boot; diff --git a/py/circuitpy_mpconfig.mk b/py/circuitpy_mpconfig.mk index c7b83dba21..90e78da0da 100644 --- a/py/circuitpy_mpconfig.mk +++ b/py/circuitpy_mpconfig.mk @@ -350,18 +350,18 @@ CFLAGS += -DCIRCUITPY_USB_CDC_DATA_ENABLED_DEFAULT=$(CIRCUITPY_USB_CDC_DATA_ENAB CIRCUITPY_USB_HID ?= 1 CFLAGS += -DCIRCUITPY_USB_HID=$(CIRCUITPY_USB_HID) -CIRCUITPY_USB_HID_ENABLED_DEFAULT = $(CIRCUITPY_USB_HID) +CIRCUITPY_USB_HID_ENABLED_DEFAULT ?= $(CIRCUITPY_USB_HID) CFLAGS += -DCIRCUITPY_USB_HID_ENABLED_DEFAULT=$(CIRCUITPY_USB_HID_ENABLED_DEFAULT) # MIDI is usually available if there are at least 8 endpoints. CIRCUITPY_USB_MIDI ?= $(USB_NUM_EP_8_OR_GREATER) CFLAGS += -DCIRCUITPY_USB_MIDI=$(CIRCUITPY_USB_MIDI) -CIRCUITPY_USB_MIDI_ENABLED_DEFAULT = $(CIRCUITPY_USB_MIDI) +CIRCUITPY_USB_MIDI_ENABLED_DEFAULT ?= $(CIRCUITPY_USB_MIDI) CFLAGS += -DCIRCUITPY_USB_MIDI_ENABLED_DEFAULT=$(CIRCUITPY_USB_MIDI_ENABLED_DEFAULT) CIRCUITPY_USB_MSC ?= 1 CFLAGS += -DCIRCUITPY_USB_MSC=$(CIRCUITPY_USB_MSC) -CIRCUITPY_USB_MSC_ENABLED_DEFAULT = $(CIRCUITPY_USB_MSC) +CIRCUITPY_USB_MSC_ENABLED_DEFAULT ?= $(CIRCUITPY_USB_MSC) CFLAGS += -DCIRCUITPY_USB_MSC_ENABLED_DEFAULT=$(CIRCUITPY_USB_MSC_ENABLED_DEFAULT) # Defaulting this to OFF initially because it has only been tested on a diff --git a/supervisor/shared/safe_mode.c b/supervisor/shared/safe_mode.c index 661fd79af8..ec85ea9d43 100644 --- a/supervisor/shared/safe_mode.c +++ b/supervisor/shared/safe_mode.c @@ -117,13 +117,17 @@ void __attribute__((noinline,)) reset_into_safe_mode(safe_mode_t reason) { -#define FILE_AN_ISSUE translate("\nPlease file an issue with the contents of your CIRCUITPY drive at \nhttps://github.com/adafruit/circuitpython/issues\n") - void print_safe_mode_message(safe_mode_t reason) { if (reason == NO_SAFE_MODE) { return; } - serial_write("\n"); + + serial_write("\r\n"); + serial_write_compressed(translate("You are in safe mode because:\n")); + + const compressed_string_t *message = NULL; + + // First check for safe mode reasons that do not necessarily reflect bugs. switch (reason) { case USER_SAFE_MODE: @@ -133,40 +137,40 @@ void print_safe_mode_message(safe_mode_t reason) { serial_write_compressed(BOARD_USER_SAFE_MODE_ACTION); serial_write_compressed(translate("To exit, please reset the board without ")); serial_write_compressed(BOARD_USER_SAFE_MODE_ACTION); - #else - break; #endif - return; + break; case MANUAL_SAFE_MODE: - serial_write_compressed(translate("CircuitPython is in safe mode because you pressed the reset button during boot. Press again to exit safe mode.\n")); - return; + message = translate("You pressed the reset button during boot. Press again to exit safe mode."); + break; case PROGRAMMATIC_SAFE_MODE: - serial_write_compressed(translate("The `microcontroller` module was used to boot into safe mode. Press reset to exit safe mode.\n")); - return; + message = translate("The `microcontroller` module was used to boot into safe mode. Press reset to exit safe mode."); + break; + case BROWNOUT: + message = translate("The microcontroller's power dipped. Make sure your power supply provides\nenough power for the whole circuit and press reset (after ejecting CIRCUITPY)."); + break; + case USB_TOO_MANY_ENDPOINTS: + message = translate("USB devices need more endpoints than are available."); + break; + case USB_TOO_MANY_INTERFACE_NAMES: + message = translate("USB devices specify too many interface names."); + break; + case WATCHDOG_RESET: + message = translate("Watchdog timer expired."); + break; default: break; } - serial_write_compressed(translate("You are in safe mode: something unanticipated happened.\n")); - switch (reason) { - case BROWNOUT: - serial_write_compressed(translate("The microcontroller's power dipped. Make sure your power supply provides\nenough power for the whole circuit and press reset (after ejecting CIRCUITPY).\n")); - return; - case HEAP_OVERWRITTEN: - serial_write_compressed(translate("The CircuitPython heap was corrupted because the stack was too small.\nPlease increase the stack size if you know how, or if not:")); - serial_write_compressed(FILE_AN_ISSUE); - return; - case NO_HEAP: - serial_write_compressed(translate("CircuitPython was unable to allocate the heap.\n")); - serial_write_compressed(FILE_AN_ISSUE); - return; - default: - break; + if (message) { + serial_write_compressed(message); + serial_write("\r\n"); + return; } + // Something worse happened. + serial_write_compressed(translate("CircuitPython core code crashed hard. Whoops!\n")); - const compressed_string_t *message = NULL; switch (reason) { case HARD_CRASH: message = translate("Crash into the HardFault_Handler."); @@ -177,6 +181,12 @@ void print_safe_mode_message(safe_mode_t reason) { case MICROPY_FATAL_ERROR: message = translate("Fatal error."); break; + case NO_HEAP: + message = translate("CircuitPython was unable to allocate the heap."); + break; + case HEAP_OVERWRITTEN: + message = translate("The CircuitPython heap was corrupted because the stack was too small.\nIncrease the stack size if you know how. If not:"); + break; case GC_ALLOC_OUTSIDE_VM: message = translate("Attempted heap allocation when VM not running."); break; @@ -193,19 +203,10 @@ void print_safe_mode_message(safe_mode_t reason) { case MEM_MANAGE: message = translate("Invalid memory access."); break; - case WATCHDOG_RESET: - message = translate("Watchdog timer expired."); - break; - case USB_TOO_MANY_ENDPOINTS: - message = translate("USB devices need more endpoints than are available."); - break; - case USB_TOO_MANY_INTERFACE_NAMES: - message = translate("USB devices specify too many interface names."); - break; default: message = translate("Unknown reason."); break; } serial_write_compressed(message); - serial_write_compressed(FILE_AN_ISSUE); + serial_write_compressed(translate("\nPlease file an issue with the contents of your CIRCUITPY drive at \nhttps://github.com/adafruit/circuitpython/issues\n")); } diff --git a/supervisor/shared/usb/usb_desc.c b/supervisor/shared/usb/usb_desc.c index f1d2ac7196..c1be34a5fb 100644 --- a/supervisor/shared/usb/usb_desc.c +++ b/supervisor/shared/usb/usb_desc.c @@ -231,7 +231,7 @@ static void usb_build_configuration_descriptor(void) { configuration_descriptor[CONFIG_NUM_INTERFACES_INDEX] = current_interface; // Did we run out of endpoints? - if (current_endpoint - 1 > USB_NUM_EP) { + if (current_endpoint > USB_NUM_EP) { reset_into_safe_mode(USB_TOO_MANY_ENDPOINTS); }