Added support for the PCTEL WSC-1450 board
This commit is contained in:
Henric Linden
parent
3aac226d53
commit
0427e2b9d1
|
|
@ -0,0 +1,51 @@
|
|||
# PCTEL WSC-1450
|
||||
|
||||
The PCTEL Wireless Sensor Core (WSC) is a versatile Industrial IoT product line
|
||||
that offers multiple radio connectivity options including cellular, LoRa,
|
||||
Bluetooth 5, NFC as well as 802.15.4 support.
|
||||
|
||||
In addition to several radios, the PCTEL WSC includes several sensors to
|
||||
monitor a variety of physical conditions. These sensors can detect gas, air
|
||||
quality, temperature, relative humidity, acceleration, angular rate of change,
|
||||
magnetic field, range, and sound. For solution optimization, the PCTEL WSC can
|
||||
be ordered with a subset of radios and sensors.
|
||||
|
||||
For more details about this board, and its varaiants, navigate to
|
||||
https://pctel.com
|
||||
|
||||
# Build instructions
|
||||
|
||||
Configure your build enviroment according to the Adafruit instructions. To
|
||||
build circuitpython for WSC-1450 do:
|
||||
|
||||
cd ports/nrf make BOARD=pctel_wsc_1450
|
||||
|
||||
This will create a number of firmware files in the `build-pctel_wsc_1450`
|
||||
directory.
|
||||
|
||||
|
||||
# Installing
|
||||
|
||||
The WSC-1450 do not feature an Adafruit-provided bootloader (supporting
|
||||
niceties like UF2 flashing). Instead, WSC-1450 uses DAPLink. DAPLink handles
|
||||
everything from debugging to programming the device, as well as the boot
|
||||
sequence.
|
||||
|
||||
1. Connect the WSC-1450 dev kit unsing a USB cable to the `DHD USB` port. This
|
||||
will power up the board and open a file browser showing the contents of the
|
||||
target. (DAPlink magic)
|
||||
2. Copy the newly built firmware to the WSC-1450 target using drag-n-drop or
|
||||
other method. The file to upload is
|
||||
`circuitpython/ports/nrf/build-pctel_wsc_1450/firmware.combined.hex`
|
||||
3. Wait for the file to upload.
|
||||
4. Install is complete. Reset the board.
|
||||
|
||||
# Running
|
||||
|
||||
Connect an additional USB cable to the `Target USB` port on the development
|
||||
board and open a terminal like `screen` on Mac or `TeraTerm` on Windows. Serial
|
||||
settings are 115200,n,8,1.
|
||||
|
||||
Don't forget to install/update the supporting python libraries.
|
||||
|
||||
Happy hacking.
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "supervisor/board.h"
|
||||
|
||||
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|
||||
|
|
@ -0,0 +1,64 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2016 Glenn Ruben Bakke
|
||||
*
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "nrfx/hal/nrf_gpio.h"
|
||||
|
||||
#define PCTELWSC1450
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "WSC-1450"
|
||||
#define MICROPY_HW_MCU_NAME "nRF52840"
|
||||
|
||||
#define MICROPY_HW_LED_STATUS (&pin_P0_05)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_P0_27)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_P0_26)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_P1_15)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_P1_13)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_P1_14)
|
||||
|
||||
#define DEFAULT_UART_BUS_RX (&pin_P0_16)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_P0_13)
|
||||
|
||||
// Flash operation mode is determined by MICROPY_QSPI_DATAn pin configuration.
|
||||
// A pin config is valid if it is defined and its value is not 0xFF.
|
||||
// Quad mode: If all DATA0 --> DATA3 are valid
|
||||
// Dual mode: If DATA0 and DATA1 are valid while either DATA2 and/or DATA3 are invalid
|
||||
// Single mode: If only DATA0 is valid
|
||||
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 20)
|
||||
#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(0, 21)
|
||||
#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(0, 22)
|
||||
#define MICROPY_QSPI_DATA3 NRF_GPIO_PIN_MAP(0, 23)
|
||||
#define MICROPY_QSPI_SCK NRF_GPIO_PIN_MAP(0, 19)
|
||||
#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(0, 17)
|
||||
|
||||
// #if SPI_FLASH_FILESYSTEM
|
||||
// #define SPI_FLASH_MOSI_PIN &pin_P0_20
|
||||
// #define SPI_FLASH_MISO_PIN &pin_P0_21
|
||||
// #define SPI_FLASH_SCK_PIN &pin_P0_19
|
||||
// #define SPI_FLASH_CS_PIN &pin_P0_17
|
||||
// #endif
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
USB_VID = 0x239A # TODO: change to PCTEL vendor id
|
||||
USB_PID = 0x80FF # TODO: change to a PCTEL product id
|
||||
USB_PRODUCT = "WSC-1450"
|
||||
USB_MANUFACTURER = "PCTEL"
|
||||
|
||||
MCU_CHIP = nrf52840
|
||||
|
||||
QSPI_FLASH_FILESYSTEM = 1
|
||||
EXTERNAL_FLASH_DEVICE_COUNT = 1
|
||||
|
||||
# External flash is Winbond W25Q32JV_IQ
|
||||
EXTERNAL_FLASH_DEVICES = "W25Q32JVxQ"
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_32KHZ_XTAL1 ), MP_ROM_PTR(&pin_P0_00) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_32KHZ_XTAL2 ), MP_ROM_PTR(&pin_P0_01) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATTERY ), MP_ROM_PTR(&pin_P0_02) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BOARD_ID ), MP_ROM_PTR(&pin_P0_03) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_INT_LIGHT_TOF ), MP_ROM_PTR(&pin_P0_04) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED_RED ), MP_ROM_PTR(&pin_P0_05) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_SCK ), MP_ROM_PTR(&pin_P0_06) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_SCLK ), MP_ROM_PTR(&pin_P0_07) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_WS ), MP_ROM_PTR(&pin_P0_08) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_NFC1 ), MP_ROM_PTR(&pin_P0_09) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_NFC2 ), MP_ROM_PTR(&pin_P0_10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_MOSI ), MP_ROM_PTR(&pin_P0_11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_MISO ), MP_ROM_PTR(&pin_P0_12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_DEBUG_TX ), MP_ROM_PTR(&pin_P0_13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_RTS ), MP_ROM_PTR(&pin_P0_14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_DCD ), MP_ROM_PTR(&pin_P0_15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_DEBUG_RX ), MP_ROM_PTR(&pin_P0_16) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_QSPI_CSN ), MP_ROM_PTR(&pin_P0_17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BT840_RESETN ), MP_ROM_PTR(&pin_P0_18) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_QSPI_CLK ), MP_ROM_PTR(&pin_P0_19) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_QSPI_IO0 ), MP_ROM_PTR(&pin_P0_20) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_QSPI_IO1 ), MP_ROM_PTR(&pin_P0_21) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_QSPI_IO2 ), MP_ROM_PTR(&pin_P0_22) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_QSPI_IO3 ), MP_ROM_PTR(&pin_P0_23) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_HW_SHUTDOWN ), MP_ROM_PTR(&pin_P0_24) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_SD ), MP_ROM_PTR(&pin_P0_25) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA ), MP_ROM_PTR(&pin_P0_26) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL ), MP_ROM_PTR(&pin_P0_27) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_POWER_ENABLE ), MP_ROM_PTR(&pin_P0_28) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_PUSH_BUTTON ), MP_ROM_PTR(&pin_P0_29) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_ON_OFF ), MP_ROM_PTR(&pin_P0_30) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SENSOR_POWER_ENABLE ), MP_ROM_PTR(&pin_P0_31) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BT840_SWO ), MP_ROM_PTR(&pin_P1_00) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_RX ), MP_ROM_PTR(&pin_P1_01) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_TX ), MP_ROM_PTR(&pin_P1_02) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_DSR ), MP_ROM_PTR(&pin_P1_03) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_DTR ), MP_ROM_PTR(&pin_P1_04) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_INT_ACCEL ), MP_ROM_PTR(&pin_P1_05) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BOARD_ID_DISABLE ), MP_ROM_PTR(&pin_P1_06) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_DIO0 ), MP_ROM_PTR(&pin_P1_07) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_CTS ), MP_ROM_PTR(&pin_P1_08) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_SSN ), MP_ROM_PTR(&pin_P1_09) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_RESETN ), MP_ROM_PTR(&pin_P1_10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BATTERY_MONITOR_ENABLE ), MP_ROM_PTR(&pin_P1_11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_DIO1 ), MP_ROM_PTR(&pin_P1_12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_DIO2 ), MP_ROM_PTR(&pin_P1_13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_DIO3 ), MP_ROM_PTR(&pin_P1_14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CELL_PWRMON ), MP_ROM_PTR(&pin_P1_15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LORA_DIO4 ), MP_ROM_PTR(&pin_P1_15) },
|
||||
};
|
||||
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||
Loading…
Reference in New Issue