diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 455f83a21b..e2455f0cd7 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -204,6 +204,7 @@ jobs: - "pybadge_airlift" - "pyboard_v11" - "pycubed" + - "pycubed_mram" - "pygamer" - "pygamer_advance" - "pyportal" diff --git a/ports/atmel-samd/boards/pycubed/mpconfigboard.h b/ports/atmel-samd/boards/pycubed/mpconfigboard.h index 49a98e8d45..8d046c75bd 100644 --- a/ports/atmel-samd/boards/pycubed/mpconfigboard.h +++ b/ports/atmel-samd/boards/pycubed/mpconfigboard.h @@ -3,6 +3,7 @@ #define MICROPY_HW_MCU_NAME "samd51j19" #define CIRCUITPY_MCU_FAMILY samd51 +#define MICROPY_HW_LED_STATUS (&pin_PA16) #define MICROPY_HW_NEOPIXEL (&pin_PA21) #define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11) @@ -16,6 +17,7 @@ #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE) +// External flash W25Q80DV #define EXTERNAL_FLASH_QSPI_DUAL #define BOARD_HAS_CRYSTAL 1 diff --git a/ports/atmel-samd/boards/pycubed_mram/board.c b/ports/atmel-samd/boards/pycubed_mram/board.c new file mode 100644 index 0000000000..31b0812094 --- /dev/null +++ b/ports/atmel-samd/boards/pycubed_mram/board.c @@ -0,0 +1,61 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + + +#include + +#include "boards/board.h" +#include "py/mpconfig.h" +#include "shared-bindings/nvm/ByteArray.h" +#include "common-hal/microcontroller/Pin.h" +#include "hal/include/hal_gpio.h" +#include "shared-bindings/pulseio/PWMOut.h" + +nvm_bytearray_obj_t bootcnt = { + .base = { + .type = &nvm_bytearray_type + }, + .len = ( uint32_t) 8192, + .start_address = (uint8_t*) (0x00080000 - 8192) + }; + + +void board_init(void) { + pulseio_pwmout_obj_t pwm; + common_hal_pulseio_pwmout_construct(&pwm, &pin_PA23, 4096, 2, false); + common_hal_pulseio_pwmout_never_reset(&pwm); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + uint8_t value_out = 0; + common_hal_nvm_bytearray_get_bytes(&bootcnt,0,1,&value_out); + ++value_out; + common_hal_nvm_bytearray_set_bytes(&bootcnt,0,&value_out,1); +} \ No newline at end of file diff --git a/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.h b/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.h new file mode 100644 index 0000000000..aca9e3c368 --- /dev/null +++ b/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.h @@ -0,0 +1,37 @@ + +#define MICROPY_HW_BOARD_NAME "PyCubedv04-MRAM" +#define MICROPY_HW_MCU_NAME "samd51j19" +#define CIRCUITPY_MCU_FAMILY samd51 + +#define MICROPY_HW_LED_STATUS (&pin_PA16) +#define MICROPY_HW_NEOPIXEL (&pin_PA21) + +#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11) +#define MICROPY_PORT_B (PORT_PA21 | PORT_PB10 | PORT_PB11) +#define MICROPY_PORT_C (0) +#define MICROPY_PORT_D (0) + +// External flash MR2xH40 MRAM +#define EXTERNAL_FLASH_QSPI_SINGLE + +#define AUTORESET_DELAY_MS 500 + +#define CIRCUITPY_INTERNAL_NVM_SIZE 8192 + +#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE) + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PB13) +#define DEFAULT_I2C_BUS_SDA (&pin_PB12) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA13) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA12) +#define DEFAULT_SPI_BUS_MISO (&pin_PA14) + +#define DEFAULT_UART_BUS_TX (&pin_PB02) +#define DEFAULT_UART_BUS_RX (&pin_PB03) + +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 + diff --git a/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.mk b/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.mk new file mode 100644 index 0000000000..ef92b4db56 --- /dev/null +++ b/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.mk @@ -0,0 +1,24 @@ +LD_FILE = boards/samd51x19-bootloader-external-flash.ld +USB_VID = 0x04D8 +USB_PID = 0xEC44 +USB_PRODUCT = "PyCubed" +USB_MANUFACTURER = "maholli" + +CHIP_VARIANT = SAMD51J19A +CHIP_FAMILY = samd51 + +QSPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = MR2xH40 +LONGINT_IMPL = MPZ + +# Not needed. +CIRCUITPY_AUDIOBUSIO = 0 +CIRCUITPY_DISPLAYIO = 0 +CIRCUITPY_GAMEPAD = 0 +CIRCUITPY_PS2IO = 0 + +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Register +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD \ No newline at end of file diff --git a/ports/atmel-samd/boards/pycubed_mram/pins.c b/ports/atmel-samd/boards/pycubed_mram/pins.c new file mode 100644 index 0000000000..4c97f58a80 --- /dev/null +++ b/ports/atmel-samd/boards/pycubed_mram/pins.c @@ -0,0 +1,55 @@ +#include "shared-bindings/board/__init__.h" +#include "boards/board.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA14) }, + { MP_ROM_QSTR(MP_QSTR_xSDCS), MP_ROM_PTR(&pin_PA27) }, + + { MP_ROM_QSTR(MP_QSTR_RELAY_A), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_BURN1), MP_ROM_PTR(&pin_PB31) }, + { MP_ROM_QSTR(MP_QSTR_BURN2), MP_ROM_PTR(&pin_PA15) }, + + { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_L1PROG), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_AIN4), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_AIN5), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_CHRG), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_PA17), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_PA18), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_PA19), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_PA20), MP_ROM_PTR(&pin_PA20) }, + { MP_ROM_QSTR(MP_QSTR_PA22), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_PB16), MP_ROM_PTR(&pin_PB16) }, + { MP_ROM_QSTR(MP_QSTR_PB17), MP_ROM_PTR(&pin_PB17) }, + { MP_ROM_QSTR(MP_QSTR_PB22), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_PB23), MP_ROM_PTR(&pin_PB23) }, + + { MP_ROM_QSTR(MP_QSTR_RF1_RST), MP_ROM_PTR(&pin_PB00) }, + { MP_ROM_QSTR(MP_QSTR_RF1_CS), MP_ROM_PTR(&pin_PB30) }, + { MP_ROM_QSTR(MP_QSTR_RF1_IO0), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_RF1_IO4), MP_ROM_PTR(&pin_PB04) }, + + { MP_ROM_QSTR(MP_QSTR_RF2_RST), MP_ROM_PTR(&pin_PB14) }, + { MP_ROM_QSTR(MP_QSTR_RF2_CS), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_RF2_IO1), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_RF2_BSY), MP_ROM_PTR(&pin_PB07) }, + + { MP_ROM_QSTR(MP_QSTR_EN_GPS), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB03) }, + + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB12) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB13) }, + + { MP_ROM_QSTR(MP_QSTR_WDT_WDI), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA21) }, + + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); \ No newline at end of file diff --git a/ports/atmel-samd/supervisor/qspi_flash.c b/ports/atmel-samd/supervisor/qspi_flash.c index eca47b1648..fc538f95f3 100644 --- a/ports/atmel-samd/supervisor/qspi_flash.c +++ b/ports/atmel-samd/supervisor/qspi_flash.c @@ -166,7 +166,10 @@ bool spi_flash_write_data(uint32_t address, uint8_t* data, uint32_t length) { bool spi_flash_read_data(uint32_t address, uint8_t* data, uint32_t length) { samd_peripherals_disable_and_clear_cache(); - #ifdef EXTERNAL_FLASH_QSPI_DUAL + #ifdef EXTERNAL_FLASH_QSPI_SINGLE + QSPI->INSTRCTRL.bit.INSTR = CMD_READ_DATA; + uint32_t mode = QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI; + #elif defined EXTERNAL_FLASH_QSPI_DUAL QSPI->INSTRCTRL.bit.INSTR = CMD_DUAL_READ; uint32_t mode = QSPI_INSTRFRAME_WIDTH_DUAL_OUTPUT; #else @@ -174,6 +177,15 @@ bool spi_flash_read_data(uint32_t address, uint8_t* data, uint32_t length) { uint32_t mode = QSPI_INSTRFRAME_WIDTH_QUAD_OUTPUT; #endif + #ifdef EXTERNAL_FLASH_QSPI_SINGLE + QSPI->INSTRFRAME.reg = mode | + QSPI_INSTRFRAME_ADDRLEN_24BITS | + QSPI_INSTRFRAME_TFRTYPE_READMEMORY | + QSPI_INSTRFRAME_INSTREN | + QSPI_INSTRFRAME_ADDREN | + QSPI_INSTRFRAME_DATAEN | + QSPI_INSTRFRAME_DUMMYLEN(0); + #else QSPI->INSTRFRAME.reg = mode | QSPI_INSTRFRAME_ADDRLEN_24BITS | QSPI_INSTRFRAME_TFRTYPE_READMEMORY | @@ -181,6 +193,7 @@ bool spi_flash_read_data(uint32_t address, uint8_t* data, uint32_t length) { QSPI_INSTRFRAME_ADDREN | QSPI_INSTRFRAME_DATAEN | QSPI_INSTRFRAME_DUMMYLEN(8); + #endif memcpy(data, ((uint8_t *) QSPI_AHB) + address, length); // TODO(tannewt): Fix DMA and enable it. diff --git a/supervisor/shared/external_flash/common_commands.h b/supervisor/shared/external_flash/common_commands.h index cc0da21759..2eaa848331 100644 --- a/supervisor/shared/external_flash/common_commands.h +++ b/supervisor/shared/external_flash/common_commands.h @@ -43,5 +43,6 @@ #define CMD_QUAD_READ 0x6b #define CMD_ENABLE_RESET 0x66 #define CMD_RESET 0x99 +#define CMD_WAKE 0xab #endif // MICROPY_INCLUDED_ATMEL_SAMD_EXTERNAL_FLASH_COMMON_COMMANDS_H diff --git a/supervisor/shared/external_flash/devices.h b/supervisor/shared/external_flash/devices.h index fd9224f561..05e9e3c95c 100644 --- a/supervisor/shared/external_flash/devices.h +++ b/supervisor/shared/external_flash/devices.h @@ -426,6 +426,23 @@ typedef struct { .single_status_byte = false, \ } +// Everspin MRAM +#define MR2xH40 {\ + .total_size = (1 << 22), /* 4 MiB */ \ + .start_up_time_us = 10000, \ + .manufacturer_id = 0xef, /*no JDEC*/ \ + .memory_type = 0x40, /*no JDEC*/ \ + .capacity = 0x14, /*no JDEC*/ \ + .max_clock_speed_mhz = 40, \ + .quad_enable_bit_mask = 0x00, \ + .has_sector_protection = false, \ + .supports_fast_read = false, \ + .supports_qspi = false, \ + .supports_qspi_writes = false, \ + .write_status_register_split = false, \ + .single_status_byte = true, \ +} + // Settings for the Macronix MX25L1606 2MiB SPI flash. // Datasheet: #define MX25L1606 {\ diff --git a/supervisor/shared/external_flash/external_flash.c b/supervisor/shared/external_flash/external_flash.c index 9d38c07d89..7f5496d3ac 100644 --- a/supervisor/shared/external_flash/external_flash.c +++ b/supervisor/shared/external_flash/external_flash.c @@ -27,7 +27,7 @@ #include #include - +#include "mpconfigboard.h" #include "supervisor/spi_flash_api.h" #include "supervisor/shared/external_flash/common_commands.h" #include "extmod/vfs.h" @@ -57,13 +57,18 @@ static supervisor_allocation* supervisor_cache = NULL; // Wait until both the write enable and write in progress bits have cleared. static bool wait_for_flash_ready(void) { - uint8_t read_status_response[1] = {0x00}; bool ok = true; // Both the write enable and write in progress bits should be low. - do { - ok = spi_flash_read_command(CMD_READ_STATUS, read_status_response, 1); - } while (ok && (read_status_response[0] & 0x3) != 0); - return ok; + #ifdef EXTERNAL_FLASH_QSPI_SINGLE + // For NVM without a ready bit in status register + return ok; + #else + uint8_t read_status_response[1] = {0x00}; + do { + ok = spi_flash_read_command(CMD_READ_STATUS, read_status_response, 1); + } while (ok && (read_status_response[0] & 0x3) != 0); + return ok; + #endif } // Turn on the write enable bit so we can program and erase the flash. @@ -91,16 +96,18 @@ static bool write_flash(uint32_t address, const uint8_t* data, uint32_t data_len } // Don't bother writing if the data is all 1s. Thats equivalent to the flash // state after an erase. - bool all_ones = true; - for (uint16_t i = 0; i < data_length; i++) { - if (data[i] != 0xff) { - all_ones = false; - break; + #ifndef EXTERNAL_FLASH_QSPI_SINGLE + bool all_ones = true; + for (uint16_t i = 0; i < data_length; i++) { + if (data[i] != 0xff) { + all_ones = false; + break; + } } - } - if (all_ones) { - return true; - } + if (all_ones) { + return true; + } + #endif for (uint32_t bytes_written = 0; bytes_written < data_length; @@ -191,41 +198,49 @@ void supervisor_flash_init(void) { spi_flash_init(); - // The response will be 0xff if the flash needs more time to start up. - uint8_t jedec_id_response[3] = {0xff, 0xff, 0xff}; - while (jedec_id_response[0] == 0xff) { - spi_flash_read_command(CMD_READ_JEDEC_ID, jedec_id_response, 3); - } - - for (uint8_t i = 0; i < EXTERNAL_FLASH_DEVICE_COUNT; i++) { - const external_flash_device* possible_device = &possible_devices[i]; - if (jedec_id_response[0] == possible_device->manufacturer_id && - jedec_id_response[1] == possible_device->memory_type && - jedec_id_response[2] == possible_device->capacity) { +#ifdef EXTERNAL_FLASH_QSPI_SINGLE + // For NVM that don't have JEDEC response + spi_flash_command(CMD_WAKE); + for (uint8_t i = 0; i < EXTERNAL_FLASH_DEVICE_COUNT; i++) { + const external_flash_device* possible_device = &possible_devices[i]; flash_device = possible_device; break; } - } +#else + // The response will be 0xff if the flash needs more time to start up. + uint8_t jedec_id_response[3] = {0xff, 0xff, 0xff}; + while (jedec_id_response[0] == 0xff) { + spi_flash_read_command(CMD_READ_JEDEC_ID, jedec_id_response, 3); + } - if (flash_device == NULL) { - return; - } - - // We don't know what state the flash is in so wait for any remaining writes and then reset. - uint8_t read_status_response[1] = {0x00}; - // The write in progress bit should be low. - do { - spi_flash_read_command(CMD_READ_STATUS, read_status_response, 1); - } while ((read_status_response[0] & 0x1) != 0); - // The suspended write/erase bit should be low. - do { - spi_flash_read_command(CMD_READ_STATUS2, read_status_response, 1); - } while ((read_status_response[0] & 0x80) != 0); - - - spi_flash_command(CMD_ENABLE_RESET); - spi_flash_command(CMD_RESET); + for (uint8_t i = 0; i < EXTERNAL_FLASH_DEVICE_COUNT; i++) { + const external_flash_device* possible_device = &possible_devices[i]; + if (jedec_id_response[0] == possible_device->manufacturer_id && + jedec_id_response[1] == possible_device->memory_type && + jedec_id_response[2] == possible_device->capacity) { + flash_device = possible_device; + break; + } + } +#endif + if (flash_device == NULL) { + return; + } + // We don't know what state the flash is in so wait for any remaining writes and then reset. + uint8_t read_status_response[1] = {0x00}; + // The write in progress bit should be low. + do { + spi_flash_read_command(CMD_READ_STATUS, read_status_response, 1); + } while ((read_status_response[0] & 0x1) != 0); +#ifndef EXTERNAL_FLASH_QSPI_SINGLE + // The suspended write/erase bit should be low. + do { + spi_flash_read_command(CMD_READ_STATUS2, read_status_response, 1); + } while ((read_status_response[0] & 0x80) != 0); + spi_flash_command(CMD_ENABLE_RESET); + spi_flash_command(CMD_RESET); +#endif // Wait 30us for the reset common_hal_mcu_delay_us(30);