djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Enable showing the console on a debug uart

This commit is contained in:
Mark Olsson 2020-05-18 14:04:55 +02:00
parent 6a5ab57c18
commit 007c92ee6a
15 changed files with 128 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
main.c
View File

@ -430,6 +430,9 @@ int __attribute__((used)) main(void) {
// displays init after filesystem, since they could share the flash SPI
board_init();
// Start the debug serial
serial_early_init();
// Reset everything and prep MicroPython to run boot.py.
reset_port();
reset_board();

3
ports/atmel-samd/common-hal/busio/UART.c
View File

@ -56,7 +56,8 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
const mcu_pin_obj_t * rts, const mcu_pin_obj_t * cts,
const mcu_pin_obj_t * rs485_dir, bool rs485_invert,
uint32_t baudrate, uint8_t bits, uart_parity_t parity, uint8_t stop,
mp_float_t timeout, uint16_t receiver_buffer_size) {
mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer,
bool sigint_enabled) {
Sercom* sercom = NULL;
uint8_t sercom_index = 255; // Unset index

3
ports/cxd56/common-hal/busio/UART.c
View File

@ -57,7 +57,8 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
const mcu_pin_obj_t * rts, const mcu_pin_obj_t * cts,
const mcu_pin_obj_t * rs485_dir, bool rs485_invert,
uint32_t baudrate, uint8_t bits, uart_parity_t parity, uint8_t stop,
mp_float_t timeout, uint16_t receiver_buffer_size) {
mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer,
bool sigint_enabled) {
struct termios tio;
if ((rts != NULL) || (cts != NULL) || (rs485_dir != NULL) || (rs485_invert)) {

3
ports/mimxrt10xx/common-hal/busio/UART.c
View File

@ -76,7 +76,8 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
const mcu_pin_obj_t * rts, const mcu_pin_obj_t * cts,
const mcu_pin_obj_t * rs485_dir, bool rs485_invert,
uint32_t baudrate, uint8_t bits, uart_parity_t parity, uint8_t stop,
mp_float_t timeout, uint16_t receiver_buffer_size) {
mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer,
bool sigint_enabled) {
// TODO: Allow none rx or tx

3
ports/nrf/common-hal/busio/UART.c
View File

@ -134,7 +134,8 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
const mcu_pin_obj_t * rts, const mcu_pin_obj_t * cts,
const mcu_pin_obj_t * rs485_dir, bool rs485_invert,
uint32_t baudrate, uint8_t bits, uart_parity_t parity, uint8_t stop,
mp_float_t timeout, uint16_t receiver_buffer_size) {
mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer,
bool sigint_enabled) {
if ((rts != NULL) || (cts != NULL) || (rs485_dir != NULL) || (rs485_invert)) {
mp_raise_ValueError(translate("RTS/CTS/RS485 Not yet supported on this device"));

3
ports/stm/boards/nucleo_f746zg/mpconfigboard.h
View File

@ -34,3 +34,6 @@
#define FLASH_PAGE_SIZE (0x4000)
#define BOARD_OSC_DIV (8)
#define DEBUG_UART_TX (&pin_PD08)
#define DEBUG_UART_RX (&pin_PD09)

5
ports/stm/boards/nucleo_f746zg/pins.c
View File

@ -58,8 +58,9 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_USB_ID), MP_ROM_PTR(&pin_PA10) },
{ MP_ROM_QSTR(MP_QSTR_USB_DM), MP_ROM_PTR(&pin_PA11) },
{ MP_ROM_QSTR(MP_QSTR_USB_DP), MP_ROM_PTR(&pin_PA12) },
{ MP_ROM_QSTR(MP_QSTR_VCP_TX), MP_ROM_PTR(&pin_PD08) },
{ MP_ROM_QSTR(MP_QSTR_VCP_RX), MP_ROM_PTR(&pin_PD09) },
// As we use these for the debug_console, we won't enable them here.
// { MP_ROM_QSTR(MP_QSTR_VCP_TX), MP_ROM_PTR(&pin_PD08) },
// { MP_ROM_QSTR(MP_QSTR_VCP_RX), MP_ROM_PTR(&pin_PD09) },
{ MP_ROM_QSTR(MP_QSTR_UART2_TX), MP_ROM_PTR(&pin_PD05) },
{ MP_ROM_QSTR(MP_QSTR_UART2_RX), MP_ROM_PTR(&pin_PD06) },
{ MP_ROM_QSTR(MP_QSTR_UART2_RTS), MP_ROM_PTR(&pin_PD04) },

44
ports/stm/common-hal/busio/UART.c
View File

@ -28,6 +28,7 @@
#include "shared-bindings/busio/UART.h"
#include "mpconfigport.h"
#include "lib/mp-readline/readline.h"
#include "lib/utils/interrupt_char.h"
#include "py/gc.h"
#include "py/mperrno.h"
@ -39,6 +40,7 @@
//arrays use 0 based numbering: UART1 is stored at index 0
STATIC bool reserved_uart[MAX_UART];
STATIC bool never_reset_uart[MAX_UART];
int errflag; //Used to restart read halts
STATIC void uart_clock_enable(uint16_t mask);
@ -61,11 +63,16 @@ STATIC USART_TypeDef * assign_uart_or_throw(busio_uart_obj_t* self, bool pin_eva
}
void uart_reset(void) {
uint16_t never_reset_mask = 0x00;
for (uint8_t i = 0; i < MAX_UART; i++) {
if (!never_reset_uart[i]) {
reserved_uart[i] = false;
MP_STATE_PORT(cpy_uart_obj_all)[i] = NULL;
} else {
never_reset_mask |= 1 << i;
}
uart_clock_disable(ALL_UARTS);
}
uart_clock_disable(ALL_UARTS & ~(never_reset_mask));
}
void common_hal_busio_uart_construct(busio_uart_obj_t *self,
@ -73,7 +80,8 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
const mcu_pin_obj_t * rts, const mcu_pin_obj_t * cts,
const mcu_pin_obj_t * rs485_dir, bool rs485_invert,
uint32_t baudrate, uint8_t bits, uart_parity_t parity, uint8_t stop,
mp_float_t timeout, uint16_t receiver_buffer_size) {
mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer,
bool sigint_enabled) {
//match pins to UART objects
USART_TypeDef * USARTx;
@ -209,9 +217,13 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
// Init buffer for rx and claim pins
if (self->rx != NULL) {
if (receiver_buffer != NULL) {
self->ringbuf = (ringbuf_t){ receiver_buffer, receiver_buffer_size };
} else {
if (!ringbuf_alloc(&self->ringbuf, receiver_buffer_size, true)) {
mp_raise_ValueError(translate("UART Buffer allocation error"));
}
}
claim_pin(rx);
}
if (self->tx != NULL) {
@ -219,6 +231,7 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
}
self->baudrate = baudrate;
self->timeout_ms = timeout * 1000;
self->sigint_enabled = sigint_enabled;
//start the interrupt series
if ((HAL_UART_GetState(&self->handle) & HAL_UART_STATE_BUSY_RX) == HAL_UART_STATE_BUSY_RX) {
@ -234,6 +247,17 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self,
errflag = HAL_OK;
}
void common_hal_busio_uart_never_reset(busio_uart_obj_t *self) {
for (size_t i = 0; i < MP_ARRAY_SIZE(mcu_uart_banks); i++) {
if (mcu_uart_banks[i] == self->handle.Instance) {
never_reset_uart[i] = true;
never_reset_pin_number(self->tx->pin->port, self->tx->pin->number);
never_reset_pin_number(self->rx->pin->port, self->rx->pin->number);
break;
}
}
}
bool common_hal_busio_uart_deinited(busio_uart_obj_t *self) {
return self->tx->pin == NULL;
}
@ -241,6 +265,13 @@ bool common_hal_busio_uart_deinited(busio_uart_obj_t *self) {
void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
if (common_hal_busio_uart_deinited(self)) return;
for (size_t i = 0; i < MP_ARRAY_SIZE(mcu_uart_banks); i++) {
if (mcu_uart_banks[i] == self->handle.Instance) {
never_reset_uart[i] = false;
break;
}
}
reset_pin_number(self->tx->pin->port,self->tx->pin->number);
reset_pin_number(self->rx->pin->port,self->rx->pin->number);
self->tx = NULL;
@ -289,7 +320,8 @@ size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data,
bool write_err = false; //write error shouldn't disable interrupts
HAL_NVIC_DisableIRQ(self->irq);
if (HAL_UART_Transmit(&self->handle, (uint8_t*)data, len, HAL_MAX_DELAY) != HAL_OK) {
HAL_StatusTypeDef ret = HAL_UART_Transmit(&self->handle, (uint8_t*)data, len, HAL_MAX_DELAY);
if (ret != HAL_OK) {
write_err = true;
}
HAL_UART_Receive_IT(&self->handle, &self->rx_char, 1);
@ -313,6 +345,12 @@ void HAL_UART_RxCpltCallback(UART_HandleTypeDef *handle)
}
ringbuf_put_n(&context->ringbuf, &context->rx_char, 1);
errflag = HAL_UART_Receive_IT(handle, &context->rx_char, 1);
if (context->sigint_enabled) {
if (context->rx_char == CHAR_CTRL_C) {
common_hal_busio_uart_clear_rx_buffer(context);
mp_keyboard_interrupt();
}
}
return;
}

2
ports/stm/common-hal/busio/UART.h
View File

@ -52,6 +52,8 @@ typedef struct {
uint32_t baudrate;
uint32_t timeout_ms;
bool sigint_enabled;
} busio_uart_obj_t;
void uart_reset(void);

2
shared-bindings/busio/UART.c
View File

@ -140,7 +140,7 @@ STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, co
common_hal_busio_uart_construct(self, tx, rx, rts, cts, rs485_dir, rs485_invert,
args[ARG_baudrate].u_int, bits, parity, stop, timeout,
args[ARG_receiver_buffer_size].u_int);
args[ARG_receiver_buffer_size].u_int, NULL, false);
return (mp_obj_t)self;
}

6
shared-bindings/busio/UART.h
View File

@ -29,6 +29,7 @@
#include "common-hal/microcontroller/Pin.h"
#include "common-hal/busio/UART.h"
#include "py/ringbuf.h"
extern const mp_obj_type_t busio_uart_type;
@ -44,7 +45,8 @@ extern void common_hal_busio_uart_construct(busio_uart_obj_t *self,
const mcu_pin_obj_t * rts, const mcu_pin_obj_t * cts,
const mcu_pin_obj_t * rs485_dir, bool rs485_invert,
uint32_t baudrate, uint8_t bits, uart_parity_t parity, uint8_t stop,
mp_float_t timeout, uint16_t receiver_buffer_size);
mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer,
bool sigint_enabled);
extern void common_hal_busio_uart_deinit(busio_uart_obj_t *self);
extern bool common_hal_busio_uart_deinited(busio_uart_obj_t *self);
@ -66,4 +68,6 @@ extern uint32_t common_hal_busio_uart_rx_characters_available(busio_uart_obj_t *
extern void common_hal_busio_uart_clear_rx_buffer(busio_uart_obj_t *self);
extern bool common_hal_busio_uart_ready_to_tx(busio_uart_obj_t *self);
extern void common_hal_busio_uart_never_reset(busio_uart_obj_t *self);
#endif // MICROPY_INCLUDED_SHARED_BINDINGS_BUSIO_UART_H

2
shared-module/board/__init__.c
View File

@ -123,7 +123,7 @@ mp_obj_t common_hal_board_create_uart(void) {
#endif
common_hal_busio_uart_construct(self, tx, rx, rts, cts, rs485_dir, rs485_invert,
9600, 8, PARITY_NONE, 1, 1.0f, 64);
9600, 8, PARITY_NONE, 1, 1.0f, 64, NULL, false);
MP_STATE_VM(shared_uart_bus) = MP_OBJ_FROM_PTR(self);
return MP_STATE_VM(shared_uart_bus);
}

1
supervisor/serial.h
View File

@ -38,6 +38,7 @@
FIL* boot_output_file;
#endif
void serial_early_init(void);
void serial_init(void);
void serial_write(const char* text);
// Only writes up to given length. Does not check for null termination at all.

52
supervisor/shared/serial.c
View File

@ -32,26 +32,73 @@
#include "shared-bindings/terminalio/Terminal.h"
#include "supervisor/serial.h"
#include "supervisor/usb.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "tusb.h"
/*
* Note: DEBUG_UART currently only works on STM32,
* enabling on another platform will cause a crash.
*/
#if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
#include "shared-bindings/busio/UART.h"
busio_uart_obj_t debug_uart;
byte buf_array[64];
#endif
void serial_early_init(void) {
#if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
debug_uart.base.type = &busio_uart_type;
const mcu_pin_obj_t* rx = MP_OBJ_TO_PTR(DEBUG_UART_RX);
const mcu_pin_obj_t* tx = MP_OBJ_TO_PTR(DEBUG_UART_TX);
common_hal_busio_uart_construct(&debug_uart, tx, rx, NULL, NULL, NULL,
false, 115200, 8, PARITY_NONE, 1, 1.0f, 64,
buf_array, true);
common_hal_busio_uart_never_reset(&debug_uart);
#endif
}
void serial_init(void) {
usb_init();
}
bool serial_connected(void) {
#if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
return true;
#else
return tud_cdc_connected();
#endif
}
char serial_read(void) {
#if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
if (tud_cdc_connected() && tud_cdc_available() > 0) {
return (char) tud_cdc_read_char();
}
int uart_errcode;
char text;
common_hal_busio_uart_read(&debug_uart, (uint8_t*) &text, 1, &uart_errcode);
return text;
#else
return (char) tud_cdc_read_char();
#endif
}
bool serial_bytes_available(void) {
#if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
return common_hal_busio_uart_rx_characters_available(&debug_uart) || (tud_cdc_available() > 0);
#else
return tud_cdc_available() > 0;
#endif
}
void serial_write_substring(const char* text, uint32_t length) {
if (length == 0) {
return;
}
#if CIRCUITPY_DISPLAYIO
int errcode;
common_hal_terminalio_terminal_write(&supervisor_terminal, (const uint8_t*) text, length, &errcode);
@ -62,6 +109,11 @@ void serial_write_substring(const char* text, uint32_t length) {
count += tud_cdc_write(text + count, length - count);
usb_background();
}
#if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX)
int uart_errcode;
common_hal_busio_uart_write(&debug_uart, (const uint8_t*) text, length, &uart_errcode);
#endif
}
void serial_write(const char* text) {

4
supervisor/stub/serial.c
View File

@ -26,6 +26,10 @@
#include "supervisor/serial.h"
void serial_early_init(void) {
}
void serial_init(void) {
}