circuitpython/ports/nrf/boards/pca10056/pins.csv

P0,P0
P1,P1
P2,P2,ADC0_IN0
P3,P3,ADC0_IN1
P4,P4,ADC0_IN2
P5,P5,ADC0_IN3
P6,P6
P7,P7
P8,P8
P9,P9
P10,P10
P11,P11
P12,P12
P13,P13
P14,P14
P15,P15
P16,P16
P17,P17
P18,P18
P19,P19
P20,P20
P21,P21
P22,P22
P23,P23
P24,P24
P25,P25
P26,P26
P27,P27
P28,P28,ADC0_IN4
P29,P29,ADC0_IN5
P30,P30,ADC0_IN6
P31,P31,ADC0_IN7
P32,P32
P33,P33
P34,P34
P35,P35
P36,P36
P37,P37
P38,P38
P39,P39
P40,P40
P41,P41
P42,P42
P43,P43
P44,P44
P45,P45
P46,P46
P47,P47
nrf: Remove port member from Pin object In order to be able to support GPIO1 port on nrf52840 the port has been removed from the Pin object. All pins on port1 will now be incrementally on top of the pin numbers for gpio0. Hence, Pin 1.00 will become P32, and Pin 1.15 will become P47. The modification is done to address the new gpio HAL interface in nrfx, which resolves the port to be configured base on a multiple of 32. The patch also affects the existing devices which does not have a second GPIO port in the way that the port indication A and B is removed from Pin generation. This means that the port which was earlier addressed as PA0 is now P0, and PA31 is P31. Also, this patch removes the gpio member which earlier pointed to the perihperal GPIO base address. This is not needed anymore, hence removed. 2018-03-30 08:20:52 -04:00			`P0,P0`
			`P1,P1`
			`P2,P2,ADC0_IN0`
			`P3,P3,ADC0_IN1`
			`P4,P4,ADC0_IN2`
			`P5,P5,ADC0_IN3`
			`P6,P6`
			`P7,P7`
			`P8,P8`
			`P9,P9`
			`P10,P10`
			`P11,P11`
			`P12,P12`
			`P13,P13`
			`P14,P14`
			`P15,P15`
			`P16,P16`
			`P17,P17`
			`P18,P18`
			`P19,P19`
			`P20,P20`
			`P21,P21`
			`P22,P22`
			`P23,P23`
			`P24,P24`
			`P25,P25`
			`P26,P26`
			`P27,P27`
			`P28,P28,ADC0_IN4`
			`P29,P29,ADC0_IN5`
			`P30,P30,ADC0_IN6`
			`P31,P31,ADC0_IN7`
			`P32,P32`
			`P33,P33`
			`P34,P34`
			`P35,P35`
			`P36,P36`
			`P37,P37`
			`P38,P38`
			`P39,P39`
			`P40,P40`
			`P41,P41`
			`P42,P42`
			`P43,P43`
			`P44,P44`
			`P45,P45`
			`P46,P46`
			`P47,P47`