circuitpython/ports/stm32/usbd_desc.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

193 lines
7.1 KiB
C
Raw Normal View History

/*
* This file is part of the MicroPython project, http://micropython.org/
*/
/**
******************************************************************************
* @file USB_Device/CDC_Standalone/Src/usbd_desc.c
* @author MCD Application Team
* @version V1.0.1
* @date 26-February-2014
* @brief This file provides the USBD descriptors and string formatting method.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
#include "usbd_core.h"
#include "usbd_desc.h"
#include "usbd_conf.h"
// need this header just for MP_HAL_UNIQUE_ID_ADDRESS
#include "py/mphal.h"
// Need this header for MICROPY_HW_USB_xxx configuration values.
#include "py/mpconfig.h"
__ALIGN_BEGIN static const uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END = {
USB_LEN_LANGID_STR_DESC,
USB_DESC_TYPE_STRING,
LOBYTE(MICROPY_HW_USB_LANGID_STRING),
HIBYTE(MICROPY_HW_USB_LANGID_STRING),
};
// set the VID, PID and device release number
void USBD_SetVIDPIDRelease(usbd_cdc_msc_hid_state_t *usbd, uint16_t vid, uint16_t pid, uint16_t device_release_num, int cdc_only) {
uint8_t *dev_desc = &usbd->usbd_device_desc[0];
dev_desc[0] = USB_LEN_DEV_DESC; // bLength
dev_desc[1] = USB_DESC_TYPE_DEVICE; // bDescriptorType
dev_desc[2] = 0x00; // bcdUSB
dev_desc[3] = 0x02; // bcdUSB
if (cdc_only) {
// Make it look like a Communications device if we're only
// using CDC. Otherwise, windows gets confused when we tell it that
// its a composite device with only a cdc serial interface.
dev_desc[4] = 0x02; // bDeviceClass
dev_desc[5] = 0x00; // bDeviceSubClass
dev_desc[6] = 0x00; // bDeviceProtocol
} else {
// For the other modes, we make this look like a composite device.
dev_desc[4] = 0xef; // bDeviceClass: Miscellaneous Device Class
dev_desc[5] = 0x02; // bDeviceSubClass: Common Class
dev_desc[6] = 0x01; // bDeviceProtocol: Interface Association Descriptor
}
dev_desc[7] = USB_MAX_EP0_SIZE; // bMaxPacketSize
dev_desc[8] = LOBYTE(vid); // idVendor
dev_desc[9] = HIBYTE(vid); // idVendor
dev_desc[10] = LOBYTE(pid); // idVendor
dev_desc[11] = HIBYTE(pid); // idVendor
dev_desc[12] = LOBYTE(device_release_num); // bcdDevice
dev_desc[13] = HIBYTE(device_release_num); // bcdDevice
dev_desc[14] = USBD_IDX_MFC_STR; // Index of manufacturer string
dev_desc[15] = USBD_IDX_PRODUCT_STR; // Index of product string
dev_desc[16] = USBD_IDX_SERIAL_STR; // Index of serial number string
dev_desc[17] = USBD_MAX_NUM_CONFIGURATION; // bNumConfigurations
}
/**
* @brief Returns the device descriptor.
* @param speed: Current device speed
* @param length: Pointer to data length variable
* @retval Pointer to descriptor buffer
*/
STATIC uint8_t *USBD_DeviceDescriptor(USBD_HandleTypeDef *pdev, uint16_t *length) {
uint8_t *dev_desc = ((usbd_cdc_msc_hid_state_t *)pdev->pClassData)->usbd_device_desc;
*length = USB_LEN_DEV_DESC;
return dev_desc;
}
/**
* @brief Returns a string descriptor
* @param idx: Index of the string descriptor to retrieve
* @param length: Pointer to data length variable
* @retval Pointer to descriptor buffer, or NULL if idx is invalid
*/
STATIC uint8_t *USBD_StrDescriptor(USBD_HandleTypeDef *pdev, uint8_t idx, uint16_t *length) {
char str_buf[16];
const char *str = NULL;
switch (idx) {
case USBD_IDX_LANGID_STR:
*length = sizeof(USBD_LangIDDesc);
return (uint8_t *)USBD_LangIDDesc; // the data should only be read from this buf
case USBD_IDX_MFC_STR:
str = MICROPY_HW_USB_MANUFACTURER_STRING;
break;
case USBD_IDX_PRODUCT_STR:
if (pdev->dev_speed == USBD_SPEED_HIGH) {
str = MICROPY_HW_USB_PRODUCT_HS_STRING;
} else {
str = MICROPY_HW_USB_PRODUCT_FS_STRING;
}
break;
case USBD_IDX_SERIAL_STR: {
// This document: http://www.usb.org/developers/docs/devclass_docs/usbmassbulk_10.pdf
// says that the serial number has to be at least 12 digits long and that
// the last 12 digits need to be unique. It also stipulates that the valid
// character set is that of upper-case hexadecimal digits.
//
// The onboard DFU bootloader produces a 12-digit serial number based on
// the 96-bit unique ID, so for consistency we go with this algorithm.
// You can see the serial number if you use: lsusb -v
//
// See: https://my.st.com/52d187b7 for the algorithm used.
uint8_t *id = (uint8_t *)MP_HAL_UNIQUE_ID_ADDRESS;
snprintf(str_buf, sizeof(str_buf),
"%02X%02X%02X%02X%02X%02X",
id[11], id[10] + id[2], id[9], id[8] + id[0], id[7], id[6]);
str = str_buf;
break;
}
case USBD_IDX_CONFIG_STR:
if (pdev->dev_speed == USBD_SPEED_HIGH) {
str = MICROPY_HW_USB_CONFIGURATION_HS_STRING;
} else {
str = MICROPY_HW_USB_CONFIGURATION_FS_STRING;
}
break;
case USBD_IDX_INTERFACE_STR:
if (pdev->dev_speed == USBD_SPEED_HIGH) {
str = MICROPY_HW_USB_INTERFACE_HS_STRING;
} else {
str = MICROPY_HW_USB_INTERFACE_FS_STRING;
}
break;
#ifdef MICROPY_HW_USB_INTERFACE_CDC0_STRING
case USBD_IDX_INTERFACE_CDC0_STR:
str = MICROPY_HW_USB_INTERFACE_CDC0_STRING;
break;
#endif
#ifdef MICROPY_HW_USB_INTERFACE_CDC1_STRING
case USBD_IDX_INTERFACE_CDC1_STR:
str = MICROPY_HW_USB_INTERFACE_CDC1_STRING;
break;
#endif
#ifdef MICROPY_HW_USB_INTERFACE_CDC2_STRING
case USBD_IDX_INTERFACE_CDC2_STR:
str = MICROPY_HW_USB_INTERFACE_CDC2_STRING;
break;
#endif
default:
// invalid string index
return NULL;
}
uint8_t *str_desc = ((usbd_cdc_msc_hid_state_t *)pdev->pClassData)->usbd_str_desc;
USBD_GetString((uint8_t *)str, str_desc, length);
return str_desc;
}
const USBD_DescriptorsTypeDef USBD_Descriptors = {
USBD_DeviceDescriptor,
USBD_StrDescriptor,
};
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/