circuitpython/stmhal/hal/f4/inc/stm32f4xx_ll_sdmmc.h

920 lines
40 KiB
C
Raw Normal View History

/**
******************************************************************************
* @file stm32f4xx_ll_sdmmc.h
* @author MCD Application Team
* @version V1.5.2
* @date 22-September-2016
* @brief Header file of SDMMC HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_LL_SDMMC_H
#define __STM32F4xx_LL_SDMMC_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
defined(STM32F412Rx) || defined(STM32F412Cx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_Driver
* @{
*/
/** @addtogroup SDMMC_LL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
* @{
*/
/**
* @brief SDMMC Configuration Structure definition
*/
typedef struct
{
uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref SDIO_Clock_Edge */
uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
enabled or disabled.
This parameter can be a value of @ref SDIO_Clock_Bypass */
uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
disabled when the bus is idle.
This parameter can be a value of @ref SDIO_Clock_Power_Save */
uint32_t BusWide; /*!< Specifies the SDIO bus width.
This parameter can be a value of @ref SDIO_Bus_Wide */
uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
}SDIO_InitTypeDef;
/**
* @brief SDIO Command Control structure
*/
typedef struct
{
uint32_t Argument; /*!< Specifies the SDIO command argument which is sent
to a card as part of a command message. If a command
contains an argument, it must be loaded into this register
before writing the command to the command register. */
uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
Max_Data = 64 */
uint32_t Response; /*!< Specifies the SDIO response type.
This parameter can be a value of @ref SDIO_Response_Type */
uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is
enabled or disabled.
This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
is enabled or disabled.
This parameter can be a value of @ref SDIO_CPSM_State */
}SDIO_CmdInitTypeDef;
/**
* @brief SDIO Data Control structure
*/
typedef struct
{
uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */
uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer.
This parameter can be a value of @ref SDIO_Data_Block_Size */
uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer
is a read or write.
This parameter can be a value of @ref SDIO_Transfer_Direction */
uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
This parameter can be a value of @ref SDIO_Transfer_Type */
uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
is enabled or disabled.
This parameter can be a value of @ref SDIO_DPSM_State */
}SDIO_DataInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
* @{
*/
/** @defgroup SDIO_Clock_Edge Clock Edge
* @{
*/
#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000U)
#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE
#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
((EDGE) == SDIO_CLOCK_EDGE_FALLING))
/**
* @}
*/
/** @defgroup SDIO_Clock_Bypass Clock Bypass
* @{
*/
#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000U)
#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS
#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
/**
* @}
*/
/** @defgroup SDIO_Clock_Power_Save Clock Power Saving
* @{
*/
#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000U)
#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV
#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
/**
* @}
*/
/** @defgroup SDIO_Bus_Wide Bus Width
* @{
*/
#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000U)
#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0
#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1
#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
((WIDE) == SDIO_BUS_WIDE_4B) || \
((WIDE) == SDIO_BUS_WIDE_8B))
/**
* @}
*/
/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control
* @{
*/
#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000U)
#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN
#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
/**
* @}
*/
/** @defgroup SDIO_Clock_Division Clock Division
* @{
*/
#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFFU)
/**
* @}
*/
/** @defgroup SDIO_Command_Index Command Index
* @{
*/
#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40U)
/**
* @}
*/
/** @defgroup SDIO_Response_Type Response Type
* @{
*/
#define SDIO_RESPONSE_NO ((uint32_t)0x00000000U)
#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0
#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP
#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \
((RESPONSE) == SDIO_RESPONSE_SHORT) || \
((RESPONSE) == SDIO_RESPONSE_LONG))
/**
* @}
*/
/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt
* @{
*/
#define SDIO_WAIT_NO ((uint32_t)0x00000000U)
#define SDIO_WAIT_IT SDIO_CMD_WAITINT
#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND
#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
((WAIT) == SDIO_WAIT_IT) || \
((WAIT) == SDIO_WAIT_PEND))
/**
* @}
*/
/** @defgroup SDIO_CPSM_State CPSM State
* @{
*/
#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000U)
#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN
#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
((CPSM) == SDIO_CPSM_ENABLE))
/**
* @}
*/
/** @defgroup SDIO_Response_Registers Response Register
* @{
*/
#define SDIO_RESP1 ((uint32_t)0x00000000U)
#define SDIO_RESP2 ((uint32_t)0x00000004U)
#define SDIO_RESP3 ((uint32_t)0x00000008U)
#define SDIO_RESP4 ((uint32_t)0x0000000CU)
#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
((RESP) == SDIO_RESP2) || \
((RESP) == SDIO_RESP3) || \
((RESP) == SDIO_RESP4))
/**
* @}
*/
/** @defgroup SDIO_Data_Length Data Lenght
* @{
*/
#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU)
/**
* @}
*/
/** @defgroup SDIO_Data_Block_Size Data Block Size
* @{
*/
#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000U)
#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0
#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1
#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030U)
#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2
#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050U)
#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060U)
#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070U)
#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3
#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090U)
#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0U)
#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0U)
#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0U)
#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0U)
#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0U)
#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
/**
* @}
*/
/** @defgroup SDIO_Transfer_Direction Transfer Direction
* @{
*/
#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000U)
#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR
#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
/**
* @}
*/
/** @defgroup SDIO_Transfer_Type Transfer Type
* @{
*/
#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000U)
#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE
#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
((MODE) == SDIO_TRANSFER_MODE_STREAM))
/**
* @}
*/
/** @defgroup SDIO_DPSM_State DPSM State
* @{
*/
#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000U)
#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN
#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
((DPSM) == SDIO_DPSM_ENABLE))
/**
* @}
*/
/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode
* @{
*/
#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000U)
#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001U)
#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
((MODE) == SDIO_READ_WAIT_MODE_DATA2))
/**
* @}
*/
/** @defgroup SDIO_Interrupt_sources Interrupt Sources
* @{
*/
#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL
#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL
#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT
#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT
#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR
#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR
#define SDIO_IT_CMDREND SDIO_STA_CMDREND
#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT
#define SDIO_IT_DATAEND SDIO_STA_DATAEND
#define SDIO_IT_STBITERR SDIO_STA_STBITERR
#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND
#define SDIO_IT_CMDACT SDIO_STA_CMDACT
#define SDIO_IT_TXACT SDIO_STA_TXACT
#define SDIO_IT_RXACT SDIO_STA_RXACT
#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE
#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF
#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF
#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF
#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE
#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE
#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL
#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL
#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT
#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND
/**
* @}
*/
/** @defgroup SDIO_Flags Flags
* @{
*/
#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL
#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL
#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT
#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT
#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR
#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR
#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND
#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT
#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND
#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR
#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND
#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT
#define SDIO_FLAG_TXACT SDIO_STA_TXACT
#define SDIO_FLAG_RXACT SDIO_STA_RXACT
#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE
#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF
#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF
#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF
#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE
#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE
#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL
#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL
#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT
#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
* @{
*/
/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region
* @{
*/
/* ------------ SDIO registers bit address in the alias region -------------- */
#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
/* --- CLKCR Register ---*/
/* Alias word address of CLKEN bit */
#define CLKCR_OFFSET (SDIO_OFFSET + 0x04U)
#define CLKEN_BITNUMBER 0x08U
#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32U) + (CLKEN_BITNUMBER * 4U))
/* --- CMD Register ---*/
/* Alias word address of SDIOSUSPEND bit */
#define CMD_OFFSET (SDIO_OFFSET + 0x0CU)
#define SDIOSUSPEND_BITNUMBER 0x0BU
#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (SDIOSUSPEND_BITNUMBER * 4U))
/* Alias word address of ENCMDCOMPL bit */
#define ENCMDCOMPL_BITNUMBER 0x0CU
#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ENCMDCOMPL_BITNUMBER * 4U))
/* Alias word address of NIEN bit */
#define NIEN_BITNUMBER 0x0DU
#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (NIEN_BITNUMBER * 4U))
/* Alias word address of ATACMD bit */
#define ATACMD_BITNUMBER 0x0EU
#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ATACMD_BITNUMBER * 4U))
/* --- DCTRL Register ---*/
/* Alias word address of DMAEN bit */
#define DCTRL_OFFSET (SDIO_OFFSET + 0x2CU)
#define DMAEN_BITNUMBER 0x03U
#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (DMAEN_BITNUMBER * 4U))
/* Alias word address of RWSTART bit */
#define RWSTART_BITNUMBER 0x08U
#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTART_BITNUMBER * 4U))
/* Alias word address of RWSTOP bit */
#define RWSTOP_BITNUMBER 0x09U
#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTOP_BITNUMBER * 4U))
/* Alias word address of RWMOD bit */
#define RWMOD_BITNUMBER 0x0AU
#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWMOD_BITNUMBER * 4U))
/* Alias word address of SDIOEN bit */
#define SDIOEN_BITNUMBER 0x0BU
#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (SDIOEN_BITNUMBER * 4U))
/**
* @}
*/
/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
* @brief SDMMC_LL registers bit address in the alias region
* @{
*/
/* ---------------------- SDIO registers bit mask --------------------------- */
/* --- CLKCR Register ---*/
/* CLKCR register clear mask */
#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\
SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\
SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
/* --- PWRCTRL Register ---*/
/* --- DCTRL Register ---*/
/* SDIO DCTRL Clear Mask */
#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\
SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE))
/* --- CMD Register ---*/
/* CMD Register clear mask */
#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\
SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND))
/* SDIO RESP Registers Address */
#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14U))
/* SDIO Initialization Frequency (400KHz max) */
#define SDIO_INIT_CLK_DIV ((uint8_t)0x76U)
/* SDIO Data Transfer Frequency (25MHz max) */
#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x00U)
/**
* @}
*/
/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
* @brief macros to handle interrupts and specific clock configurations
* @{
*/
/**
* @brief Enable the SDIO device.
* @retval None
*/
#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
/**
* @brief Disable the SDIO device.
* @retval None
*/
#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
/**
* @brief Enable the SDIO DMA transfer.
* @retval None
*/
#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
/**
* @brief Disable the SDIO DMA transfer.
* @retval None
*/
#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
/**
* @brief Enable the SDIO device interrupt.
* @param __INSTANCE__ : Pointer to SDIO register base
* @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
* This parameter can be one or a combination of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
* @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
* bus mode interrupt
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
* @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
* @retval None
*/
#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__))
/**
* @brief Disable the SDIO device interrupt.
* @param __INSTANCE__ : Pointer to SDIO register base
* @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
* This parameter can be one or a combination of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
* @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
* bus mode interrupt
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
* @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
* @retval None
*/
#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
/**
* @brief Checks whether the specified SDIO flag is set or not.
* @param __INSTANCE__ : Pointer to SDIO register base
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
* @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
* @arg SDIO_FLAG_CMDACT: Command transfer in progress
* @arg SDIO_FLAG_TXACT: Data transmit in progress
* @arg SDIO_FLAG_RXACT: Data receive in progress
* @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
* @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
* @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
* @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
* @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
* @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
* @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
* @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
* @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
* @retval The new state of SDIO_FLAG (SET or RESET).
*/
#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
/**
* @brief Clears the SDIO pending flags.
* @param __INSTANCE__ : Pointer to SDIO register base
* @param __FLAG__: specifies the flag to clear.
* This parameter can be one or a combination of the following values:
* @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
* @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
* @arg SDIO_FLAG_CTIMEOUT: Command response timeout
* @arg SDIO_FLAG_DTIMEOUT: Data timeout
* @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
* @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
* @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
* @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
* @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
* @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
* @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
* @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
* @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
* @retval None
*/
#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__))
/**
* @brief Checks whether the specified SDIO interrupt has occurred or not.
* @param __INSTANCE__ : Pointer to SDIO register base
* @param __INTERRUPT__: specifies the SDIO interrupt source to check.
* This parameter can be one of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
* @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
* bus mode interrupt
* @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
* @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
* @arg SDIO_IT_TXACT: Data transmit in progress interrupt
* @arg SDIO_IT_RXACT: Data receive in progress interrupt
* @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
* @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
* @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
* @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
* @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
* @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
* @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
* @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
* @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
* @retval The new state of SDIO_IT (SET or RESET).
*/
#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
/**
* @brief Clears the SDIO's interrupt pending bits.
* @param __INSTANCE__ : Pointer to SDIO register base
* @param __INTERRUPT__: specifies the interrupt pending bit to clear.
* This parameter can be one or a combination of the following values:
* @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
* @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
* @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
* @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
* @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
* @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
* @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
* @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
* @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
* @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
* bus mode interrupt
* @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
* @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
* @retval None
*/
#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__))
/**
* @brief Enable Start the SD I/O Read Wait operation.
* @retval None
*/
#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
/**
* @brief Disable Start the SD I/O Read Wait operations.
* @retval None
*/
#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
/**
* @brief Enable Start the SD I/O Read Wait operation.
* @retval None
*/
#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
/**
* @brief Disable Stop the SD I/O Read Wait operations.
* @retval None
*/
#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
/**
* @brief Enable the SD I/O Mode Operation.
* @retval None
*/
#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
/**
* @brief Disable the SD I/O Mode Operation.
* @retval None
*/
#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
/**
* @brief Enable the SD I/O Suspend command sending.
* @retval None
*/
#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
/**
* @brief Disable the SD I/O Suspend command sending.
* @retval None
*/
#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F412Zx) ||\
defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx)
/**
* @brief Enable the command completion signal.
* @retval None
*/
#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
/**
* @brief Disable the command completion signal.
* @retval None
*/
#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
/**
* @brief Enable the CE-ATA interrupt.
* @retval None
*/
#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0U)
/**
* @brief Disable the CE-ATA interrupt.
* @retval None
*/
#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1U)
/**
* @brief Enable send CE-ATA command (CMD61).
* @retval None
*/
#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
/**
* @brief Disable send CE-ATA command (CMD61).
* @retval None
*/
#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE ||\
STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F412Zx || STM32F412Vx || STM32F412Rx ||\
STM32F412Cx */
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup SDMMC_LL_Exported_Functions
* @{
*/
/* Initialization/de-initialization functions **********************************/
/** @addtogroup HAL_SDMMC_LL_Group1
* @{
*/
HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
/**
* @}
*/
/* I/O operation functions *****************************************************/
/** @addtogroup HAL_SDMMC_LL_Group2
* @{
*/
/* Blocking mode: Polling */
uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
/**
* @}
*/
/* Peripheral Control functions ************************************************/
/** @addtogroup HAL_SDMMC_LL_Group3
* @{
*/
HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
/* Command path state machine (CPSM) management functions */
HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
/* Data path state machine (DPSM) management functions */
HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
/* SDIO IO Cards mode management functions */
HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx ||
STM32F412Rx || STM32F412Cx */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_LL_SDMMC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/