circuitpython/ports/esp32s2/supervisor/usb.c

/*
 * This file is part of the Micro Python project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2018 hathach for Adafruit Industries
 * Copyright (c) 2019 Lucian Copeland for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "supervisor/usb.h"
#include "lib/utils/interrupt_char.h"
#include "lib/mp-readline/readline.h"

#include "components/soc/soc/esp32s2/include/soc/usb_periph.h"
#include "components/driver/include/driver/periph_ctrl.h"
#include "components/driver/include/driver/gpio.h"
#include "components/esp_rom/include/esp32s2/rom/gpio.h"
#include "components/esp_rom/include/esp_rom_gpio.h"
#include "components/hal/esp32s2/include/hal/gpio_ll.h"

#include "freertos/FreeRTOS.h"
#include "freertos/task.h"

#include "hal/usb_hal.h"

#include "tusb.h"

#ifdef CFG_TUSB_DEBUG
  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE)
#else
  #define USBD_STACK_SIZE     (3*configMINIMAL_STACK_SIZE/2)
#endif

StackType_t  usb_device_stack[USBD_STACK_SIZE];
StaticTask_t usb_device_taskdef;

TaskHandle_t xTaskToNotify = NULL;

// USB Device Driver task
// This top level thread process all usb events and invoke callbacks
void usb_device_task(void* param)
{
  (void) param;

  // RTOS forever loop
  while (1)
  {
    // tinyusb device task
    if (tusb_inited()) {
        tud_task();
        tud_cdc_write_flush();
    }
    vTaskDelay(1);
  }
}

static void configure_pins (usb_hal_context_t *usb)
{
    /* usb_periph_iopins currently configures USB_OTG as USB Device.
     * Introduce additional parameters in usb_hal_context_t when adding support
     * for USB Host.
     */
    for ( const usb_iopin_dsc_t *iopin = usb_periph_iopins; iopin->pin != -1; ++iopin ) {
        if ( (usb->use_external_phy) || (iopin->ext_phy_only == 0) ) {
            esp_rom_gpio_pad_select_gpio(iopin->pin);
            if ( iopin->is_output ) {
                esp_rom_gpio_connect_out_signal(iopin->pin, iopin->func, false, false);
            }
            else {
                esp_rom_gpio_connect_in_signal(iopin->pin, iopin->func, false);
                if ( (iopin->pin != GPIO_FUNC_IN_LOW) && (iopin->pin != GPIO_FUNC_IN_HIGH) ) {
                    gpio_ll_input_enable(&GPIO, iopin->pin);
                }
            }
            esp_rom_gpio_pad_unhold(iopin->pin);
        }
    }
    if ( !usb->use_external_phy ) {
        gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3);
        gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3);
    }
}

void init_usb_hardware(void) {
    periph_module_reset(PERIPH_USB_MODULE);
    periph_module_enable(PERIPH_USB_MODULE);
    usb_hal_context_t hal = {
        .use_external_phy = false // use built-in PHY
    };
    usb_hal_init(&hal);
    configure_pins(&hal);

    (void) xTaskCreateStatic(usb_device_task,
                             "usbd",
                             USBD_STACK_SIZE,
                             NULL,
                             5,
                             usb_device_stack,
                             &usb_device_taskdef);
}
/**
 * Callback invoked when received an "wanted" char.
 * @param itf           Interface index (for multiple cdc interfaces)
 * @param wanted_char   The wanted char (set previously)
 */
void tud_cdc_rx_wanted_cb(uint8_t itf, char wanted_char)
{
    (void) itf; // not used
    // Workaround for using lib/utils/interrupt_char.c
    // Compare mp_interrupt_char with wanted_char and ignore if not matched
    if (mp_interrupt_char == wanted_char) {
        tud_cdc_read_flush();    // flush read fifo
        mp_keyboard_interrupt();
        if (xTaskToNotify != NULL) {
          xTaskNotifyGive(xTaskToNotify);
        }
    }
}