circuitpython/stmhal/cc3k/nvmem.c

/*****************************************************************************
*
*  nvmem.c  - CC3000 Host Driver Implementation.
*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Adapted for use with the Arduino/AVR by KTOWN (Kevin Townsend) 
* & Limor Fried for Adafruit Industries
* This library works with the Adafruit CC3000 breakout 
*	----> https://www.adafruit.com/products/1469
* Adafruit invests time and resources providing this open source code,
* please support Adafruit and open-source hardware by purchasing
* products from Adafruit!
*
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions
*  are met:
*
*    Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the   
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/

//*****************************************************************************
//
//! \addtogroup nvmem_api
//! @{
//
//*****************************************************************************

#include <stdint.h>
#include <string.h>

#include "nvmem.h"
#include "hci.h"
#include "socket.h"
#include "evnt_handler.h"
#include "ccdebug.h"

//*****************************************************************************
//
// Prototypes for the structures for APIs.
//
//*****************************************************************************

#define NVMEM_READ_PARAMS_LEN 	(12)
#define NVMEM_CREATE_PARAMS_LEN 	(8)
#define NVMEM_WRITE_PARAMS_LEN  (16)

//*****************************************************************************
//
//!  nvmem_read
//!
//!  @param  ulFileId   nvmem file id:\n
//!                     NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID,
//!                     NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID,
//!                     NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//!                     NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID,
//!                     NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID,
//!                     NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID,
//!                     and user files 12-15.
//!  @param  ulLength    number of bytes to read 
//!  @param  ulOffset    ulOffset in file from where to read  
//!  @param  buff        output buffer pointer
//!
//!  @return       number of bytes read, otherwise error.
//!
//!  @brief       Reads data from the file referred by the ulFileId parameter. 
//!               Reads data from file ulOffset till length. Err if the file can't
//!               be used, is invalid, or if the read is out of bounds. 
//!	 
//*****************************************************************************

signed long 
nvmem_read(unsigned long ulFileId, unsigned long ulLength, unsigned long ulOffset, unsigned char *buff)
{
	unsigned char ucStatus = 0xFF;
	unsigned char *ptr;
	unsigned char *args;
	
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Fill in HCI packet structure
	args = UINT32_TO_STREAM(args, ulFileId);
	args = UINT32_TO_STREAM(args, ulLength);
	args = UINT32_TO_STREAM(args, ulOffset);
	
	// Initiate a HCI command
	hci_command_send(HCI_CMND_NVMEM_READ, ptr, NVMEM_READ_PARAMS_LEN);
	SimpleLinkWaitEvent(HCI_CMND_NVMEM_READ, &ucStatus);
	
	// In case there is data - read it - even if an error code is returned
   // Note: It is the user responsibility to ignore the data in case of an error code
	
	// Wait for the data in a synchronous way. Here we assume that the buffer is 
	// big enough to store also parameters of nvmem
	
	SimpleLinkWaitData(buff, 0, 0);
	
	return(ucStatus);
}

//*****************************************************************************
//
//!  nvmem_write
//!
//!  @param  ulFileId nvmem file id:\n
//!                   NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//!                   NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID,
//!                   and user files 12-15.
//!  @param  ulLength       number of bytes to write  
//!  @param  ulEntryOffset  offset in file to start write operation from 
//!  @param  buff           data to write
//!
//!  @return       on success 0, error otherwise.
//!
//!  @brief       Write data to nvmem.
//!               writes data to file referred by the ulFileId parameter. 
//!               Writes data to file ulOffset till ulLength.The file id will be 
//!               marked invalid till the write is done. The file entry doesn't
//!               need to be valid - only allocated.
//!	 
//*****************************************************************************

signed long 
nvmem_write(unsigned long ulFileId, unsigned long ulLength, unsigned long 
						ulEntryOffset, unsigned char *buff)
{
	long iRes;
	unsigned char *ptr;
	unsigned char *args;
	
	iRes = EFAIL;
	
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + SPI_HEADER_SIZE + HCI_DATA_CMD_HEADER_SIZE);
	
	// Fill in HCI packet structure
	args = UINT32_TO_STREAM(args, ulFileId);
	args = UINT32_TO_STREAM(args, 12);
	args = UINT32_TO_STREAM(args, ulLength);
	args = UINT32_TO_STREAM(args, ulEntryOffset);
	
	memcpy((ptr + SPI_HEADER_SIZE + HCI_DATA_CMD_HEADER_SIZE + 
					NVMEM_WRITE_PARAMS_LEN),buff,ulLength);
#if (DEBUG_MODE == 1)
	PRINT_F("Writing:\t");
	for (uint8_t i=0; i<ulLength; i++) {
	    PRINT_F("0x");
	    printHex(buff[i]);
	    PRINT_F(", ");
	}
	PRINT_F("\n\r");
#endif
	// Initiate a HCI command but it will come on data channel
	hci_data_command_send(HCI_CMND_NVMEM_WRITE, ptr, NVMEM_WRITE_PARAMS_LEN,
												ulLength);
	
	SimpleLinkWaitEvent(HCI_EVNT_NVMEM_WRITE, &iRes);
	
	return(iRes);
}


//*****************************************************************************
//
//!  nvmem_set_mac_address
//!
//!  @param  mac   mac address to be set
//!
//!  @return       on success 0, error otherwise.
//!
//!  @brief       Write MAC address to EEPROM. 
//!               mac address as appears over the air (OUI first)
//!	 
//*****************************************************************************

unsigned char nvmem_set_mac_address(unsigned char *mac)
{
	return  nvmem_write(NVMEM_MAC_FILEID, MAC_ADDR_LEN, 0, mac);
}

//*****************************************************************************
//
//!  nvmem_get_mac_address
//!
//!  @param[out]  mac   mac address  
//!
//!  @return       on success 0, error otherwise.
//!
//!  @brief       Read MAC address from EEPROM. 
//!               mac address as appears over the air (OUI first)
//!	 
//*****************************************************************************

unsigned char nvmem_get_mac_address(unsigned char *mac)
{
	return  nvmem_read(NVMEM_MAC_FILEID, MAC_ADDR_LEN, 0, mac);
}

//*****************************************************************************
//
//!  nvmem_write_patch
//!
//!  @param  ulFileId   nvmem file id:\n
//!                     NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID,
//!  @param  spLength   number of bytes to write 
//!  @param  spData     SP data to write
//!
//!  @return       on success 0, error otherwise.
//!
//!  @brief      program a patch to a specific file ID. 
//!              The SP data is assumed to be organized in 2-dimensional.
//!              Each line is SP_PORTION_SIZE bytes long. Actual programming is 
//!              applied in SP_PORTION_SIZE bytes portions.
//!	 
//*****************************************************************************

unsigned char nvmem_write_patch(unsigned long ulFileId, unsigned long spLength, const uint8_t *spData)
{
	unsigned char 	status = 0;
	unsigned short	offset = 0;
	unsigned char*      spDataPtr = (unsigned char*)spData;

	while ((status == 0) && (spLength >= SP_PORTION_SIZE))
	{
#if (DEBUG_MODE == 1)
	  PRINT_F("Writing: "); printDec16(offset); PRINT_F("\t");
	  for (uint8_t i=0; i<SP_PORTION_SIZE; i++) {
	    PRINT_F("0x");
	    printHex(spDataPtr[i]);
	    PRINT_F(", ");
	  }
	  PRINT_F("\n\r");
#endif
	  status = nvmem_write(ulFileId, SP_PORTION_SIZE, offset, spDataPtr);
	  offset += SP_PORTION_SIZE;
	  spLength -= SP_PORTION_SIZE;
	  spDataPtr += SP_PORTION_SIZE;
	}
	
	if (status !=0)
	{
		// NVMEM error occurred
		return status;
	}
	
	if (spLength != 0)
	{
	  // if reached here, a reminder is left
	  status = nvmem_write(ulFileId, spLength, offset, spDataPtr);
	}
	
	return status;
}

//*****************************************************************************
//
//!  nvmem_read_sp_version
//!
//!  @param[out]  patchVer    first number indicates package ID and the second 
//!                           number indicates package build number   
//!
//!  @return       on success  0, error otherwise.
//!
//!  @brief      Read patch version. read package version (WiFi FW patch, 
//!              driver-supplicant-NS patch, bootloader patch)
//!	 
//*****************************************************************************

#ifndef CC3000_TINY_DRIVER
uint8_t nvmem_read_sp_version(uint8_t* patchVer)
{
	uint8_t *ptr;
	// 1st byte is the status and the rest is the SP version
	uint8_t	retBuf[5];	
	
	ptr = tSLInformation.pucTxCommandBuffer;
  
   // Initiate a HCI command, no args are required
	hci_command_send(HCI_CMND_READ_SP_VERSION, ptr, 0);	
	SimpleLinkWaitEvent(HCI_CMND_READ_SP_VERSION, retBuf);
	
	// package ID
	*patchVer = retBuf[3];			
	// package build number
	*(patchVer+1) = retBuf[4];		
	
	return(retBuf[0]);
}
#endif

//*****************************************************************************
//
//!  nvmem_create_entry
//!
//!  @param       ulFileId    nvmem file Id:\n
//!                           * NVMEM_AES128_KEY_FILEID: 12
//!                           * NVMEM_SHARED_MEM_FILEID: 13
//!                           * and fileIDs 14 and 15
//!  @param       ulNewLen    entry ulLength  
//!
//!  @return       on success 0, error otherwise.
//!
//!  @brief      Create new file entry and allocate space on the NVMEM. 
//!              Applies only to user files.
//!              Modify the size of file.
//!              If the entry is unallocated - allocate it to size 
//!              ulNewLen (marked invalid).
//!              If it is allocated then deallocate it first.
//!              To just mark the file as invalid without resizing - 
//!              set ulNewLen=0.
//!	 
//*****************************************************************************

int8_t
nvmem_create_entry(unsigned long ulFileId, unsigned long ulNewLen)
{
	unsigned char *ptr; 
	unsigned char *args;
	int8_t retval;
	
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Fill in HCI packet structure
	args = UINT32_TO_STREAM(args, ulFileId);
	args = UINT32_TO_STREAM(args, ulNewLen);
	
	// Initiate a HCI command
	hci_command_send(HCI_CMND_NVMEM_CREATE_ENTRY,ptr, NVMEM_CREATE_PARAMS_LEN);
	
	SimpleLinkWaitEvent(HCI_CMND_NVMEM_CREATE_ENTRY, &retval);
	return(retval);
}



//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************