circuitpython/docs/library/machine.rst

:mod:`machine` --- functions related to the board
=================================================

.. module:: machine
   :synopsis: functions related to the board

The ``machine`` module contains specific functions related to the board.

Reset related functions
-----------------------

.. function:: reset()

   Resets the device in a manner similar to pushing the external RESET
   button.

.. function:: reset_cause()

   Get the reset cause. See :ref:`constants <machine_constants>` for the possible return values.

Interrupt related functions
---------------------------

.. function:: disable_irq()

   Disable interrupt requests.
   Returns the previous IRQ state: ``False``/``True`` for disabled/enabled IRQs
   respectively.  This return value can be passed to enable_irq to restore
   the IRQ to its original state.

.. function:: enable_irq(state=True)

   Enable interrupt requests.
   If ``state`` is ``True`` (the default value) then IRQs are enabled.
   If ``state`` is ``False`` then IRQs are disabled.  The most common use of
   this function is to pass it the value returned by ``disable_irq`` to
   exit a critical section.

Power related functions
-----------------------

.. function:: freq()

    .. only:: not port_wipy

        Returns CPU frequency in hertz.

    .. only:: port_wipy

        Returns a tuple of clock frequencies: ``(sysclk,)``
        These correspond to:

        - sysclk: frequency of the CPU

.. function:: idle()

   Gates the clock to the CPU, useful to reduce power consumption at any time during
   short or long periods. Peripherals continue working and execution resumes as soon
   as any interrupt is triggered (on many ports this includes system timer
   interrupt occuring at regular intervals on the order of millisecond).

.. function:: sleep()

   Stops the CPU and disables all peripherals except for WLAN. Execution is resumed from
   the point where the sleep was requested. For wake up to actually happen, wake sources
   should be configured first.

.. function:: deepsleep()

   Stops the CPU and all peripherals (including networking interfaces, if any). Execution
   is resumed from the main script, just as with a reset. The reset cause can be checked
   to know that we are coming from ``machine.DEEPSLEEP``. For wake up to actually happen,
   wake sources should be configured first, like ``Pin`` change or ``RTC`` timeout.

.. only:: port_wipy

    .. function:: wake_reason()

        Get the wake reason. See :ref:`constants <machine_constants>` for the possible return values.

Miscellaneous functions
-----------------------

.. only:: port_wipy

    .. function:: main(filename)

        Set the filename of the main script to run after boot.py is finished.  If
        this function is not called then the default file main.py will be executed.

        It only makes sense to call this function from within boot.py.

    .. function:: rng()

        Return a 24-bit software generated random number.

.. function:: unique_id()

   Returns a byte string with a unique idenifier of a board/SoC. It will vary
   from a board/SoC instance to another, if underlying hardware allows. Length
   varies by hardware (so use substring of a full value if you expect a short
   ID). In some MicroPython ports, ID corresponds to the network MAC address.

.. _machine_constants:

Constants
---------

.. data:: machine.IDLE
.. data:: machine.SLEEP
.. data:: machine.DEEPSLEEP

    irq wake values

.. data:: machine.POWER_ON
.. data:: machine.HARD_RESET
.. data:: machine.WDT_RESET
.. data:: machine.DEEPSLEEP_RESET
.. data:: machine.SOFT_RESET

    reset causes

.. data:: machine.WLAN_WAKE
.. data:: machine.PIN_WAKE
.. data:: machine.RTC_WAKE

    wake reasons

Classes
-------

.. toctree::
   :maxdepth: 1

   machine.ADC.rst
   machine.I2C.rst
   machine.Pin.rst
   machine.RTC.rst
   machine.SD.rst
   machine.SPI.rst
   machine.Timer.rst
   machine.UART.rst
   machine.WDT.rst