djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ed5e3598f1
circuitpython/ports/mimxrt/boards/MIMXRT1170_EVK/mpconfigboard.h

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

258 lines
11 KiB
C
Raw Normal View History

mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#define MICROPY_HW_BOARD_NAME "i.MX RT1170 EVK"
#define MICROPY_HW_MCU_NAME "MIMXRT1176DVMAA"
extmod/modnetwork: Add network.hostname() and network.country(). This provides a standard interface to setting the global networking config for all interfaces and interface types. For ports that already use either a static hostname (mimxrt, rp2) they will now use the configured value. The default is configured by the port (or optionally the board). For interfaces that previously supported .config(hostname), this is still supported but now implemented using the global network.hostname. Similarly, pyb.country and rp2.country are now deprecated, but the methods still exist (and forward to network.hostname). Because ESP32/ESP8266 do not use extmod/modnetwork.c they are not affected by this commit. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-01-31 22:19:45 -05:00
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-1070evk"
mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. The RT1176 has two cores, but the actual firmware supports only the CM7. There are currently no good plans on how to use the CM4. The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards, with the following extensions: - Use 64 MB RAM for the heap. - Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1) being the 1GB interface. The dual LAN port interface can eventually be adapted as well for the RT1062 MCU. This work was done in collaboration with @alphaFred.
2021-10-20 15:24:20 -04:00
#define MICROPY_EVENT_POLL_HOOK \
do { \
extern void mp_handle_pending(bool); \
mp_handle_pending(true); \
} while (0);
// MIMXRT1170_EVK has 2 user LEDs
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_04)
#define MICROPY_HW_LED2_PIN (pin_GPIO_AD_26)
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin))
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin))
#define MICROPY_HW_NUM_PIN_IRQS (6 * 32)
// Define mapping hardware UART # to logical UART #
// LPUART2 on D0/D1 -> 1
// LPUART3 on D12/D11 -> 2
// LPUART5 on D10/D13 -> 3
// LPUART11 on D15/D14 -> 4
// LPUART12 on D25/D26 -> 5
// LPUART8 on D33/D34 -> 6
// LPUART7 on D35/D36 -> 7
#define MICROPY_HW_UART_NUM (sizeof(uart_index_table) / sizeof(uart_index_table)[0])
#define MICROPY_HW_UART_INDEX { 1, 2, 3, 5, 11, 12, 8, 7 }
#define IOMUX_TABLE_UART \
{ IOMUXC_GPIO_AD_24_LPUART1_TXD }, { IOMUXC_GPIO_AD_25_LPUART1_RXD }, \
{ IOMUXC_GPIO_DISP_B2_10_LPUART2_TXD }, { IOMUXC_GPIO_DISP_B2_11_LPUART2_RXD }, \
{ IOMUXC_GPIO_AD_30_LPUART3_TXD }, { IOMUXC_GPIO_AD_31_LPUART3_RXD }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_AD_28_LPUART5_TXD }, { IOMUXC_GPIO_AD_29_LPUART5_RXD }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_AD_00_LPUART7_TXD }, { IOMUXC_GPIO_AD_01_LPUART7_RXD }, \
{ IOMUXC_GPIO_AD_02_LPUART8_TXD }, { IOMUXC_GPIO_AD_03_LPUART8_RXD }, \
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_LPSR_04_LPUART11_TXD }, { IOMUXC_GPIO_LPSR_05_LPUART11_RXD }, \
{ IOMUXC_GPIO_LPSR_10_LPUART12_TXD }, { IOMUXC_GPIO_LPSR_11_LPUART12_RXD },
// Define the mapping hardware SPI # to logical SPI #
// SCK/CS/SDO/SDI HW-SPI Logical SPI
// D13/D10/D11/D12 LPSPI1 -> 0
// D26/D28/D25/D24 LPSPI6 -> 1
// D24/ - /D14/D15 LPSPI5 -> 2
#define MICROPY_HW_SPI_INDEX { 1, 6, 5 }
#define IOMUX_TABLE_SPI \
{ IOMUXC_GPIO_AD_28_LPSPI1_SCK }, { IOMUXC_GPIO_AD_29_LPSPI1_PCS0 }, \
{ IOMUXC_GPIO_AD_30_LPSPI1_SOUT }, { IOMUXC_GPIO_AD_31_LPSPI1_SIN }, \
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_LPSR_12_LPSPI5_SCK }, { IOMUXC_GPIO_LPSR_13_LPSPI5_PCS0 }, \
{ IOMUXC_GPIO_LPSR_04_LPSPI5_SOUT }, { IOMUXC_GPIO_LPSR_05_LPSPI5_SIN }, \
{ IOMUXC_GPIO_LPSR_10_LPSPI6_SCK }, { IOMUXC_GPIO_LPSR_09_LPSPI6_PCS0 }, \
{ IOMUXC_GPIO_LPSR_11_LPSPI6_SOUT }, { IOMUXC_GPIO_LPSR_12_LPSPI6_SIN },
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
// Define the mapping hardware I2C # to logical I2C #
// SDA/SCL HW-I2C Logical I2C
// D14/D15 LPI2C5 -> 0
// D1/D0 LPI2C3 -> 1
// A4/A5 LPI2C1 -> 2
// D26/D25 LPI2C6 -> 3
// D19/D18 LPI2C2 -> 4
#define MICROPY_HW_I2C_INDEX { 5, 3, 1, 6, 2 }
#define IOMUX_TABLE_I2C \
{ IOMUXC_GPIO_AD_08_LPI2C1_SCL }, { IOMUXC_GPIO_AD_09_LPI2C1_SDA }, \
{ IOMUXC_GPIO_AD_18_LPI2C2_SCL }, { IOMUXC_GPIO_AD_19_LPI2C2_SDA }, \
{ IOMUXC_GPIO_DISP_B2_10_LPI2C3_SCL }, { IOMUXC_GPIO_DISP_B2_11_LPI2C3_SDA }, \
{ 0 }, { 0 }, \
{ IOMUXC_GPIO_LPSR_05_LPI2C5_SCL }, { IOMUXC_GPIO_LPSR_04_LPI2C5_SDA }, \
{ IOMUXC_GPIO_LPSR_11_LPI2C6_SCL }, { IOMUXC_GPIO_LPSR_10_LPI2C6_SDA },
#define MICROPY_PY_MACHINE_I2S (1)
#define MICROPY_HW_I2S_NUM (1)
#define I2S_CLOCK_MUX { 0, kCLOCK_Root_Sai1, kCLOCK_Root_Sai2, kCLOCK_Root_Sai3, kCLOCK_Root_Sai4 }
#define I2S_DMA_REQ_SRC_RX { 0, kDmaRequestMuxSai1Rx, kDmaRequestMuxSai2Rx, kDmaRequestMuxSai3Rx, kDmaRequestMuxSai4Rx }
#define I2S_DMA_REQ_SRC_TX { 0, kDmaRequestMuxSai1Tx, kDmaRequestMuxSai2Tx, kDmaRequestMuxSai3Tx, kDmaRequestMuxSai4Tx }
#define I2S_WM8960_RX_MODE (1)
#define I2S_AUDIO_PLL_CLOCK (4U)
#define DMAMUX DMAMUX0
#define I2S_GPIO(_hwid, _fn, _mode, _pin, _iomux) \
{ \
.hw_id = _hwid, \
.fn = _fn, \
.mode = _mode, \
.name = MP_QSTR_##_pin, \
.iomux = {_iomux}, \
}
#define I2S_GPIO_MAP \
{ \
I2S_GPIO(1, MCK, TX, GPIO_AD_17, IOMUXC_GPIO_AD_17_SAI1_MCLK), \
I2S_GPIO(1, SCK, RX, GPIO_AD_19, IOMUXC_GPIO_AD_19_SAI1_RX_BCLK), \
I2S_GPIO(1, WS, RX, GPIO_AD_18, IOMUXC_GPIO_AD_18_SAI1_RX_SYNC), \
I2S_GPIO(1, SD, RX, GPIO_AD_20, IOMUXC_GPIO_AD_20_SAI1_RX_DATA00), \
I2S_GPIO(1, SCK, TX, GPIO_AD_22, IOMUXC_GPIO_AD_22_SAI1_TX_BCLK), \
I2S_GPIO(1, WS, TX, GPIO_AD_23, IOMUXC_GPIO_AD_23_SAI1_TX_SYNC), \
I2S_GPIO(1, SD, TX, GPIO_AD_21, IOMUXC_GPIO_AD_21_SAI1_TX_DATA00), \
}
// USDHC1
#define USDHC_DUMMY_PIN NULL, 0
#define MICROPY_USDHC1 \
{ \
.cmd = {GPIO_SD_B1_00_USDHC1_CMD}, \
.clk = { GPIO_SD_B1_01_USDHC1_CLK }, \
.cd_b = { USDHC_DUMMY_PIN }, \
.data0 = { GPIO_SD_B1_02_USDHC1_DATA0 }, \
.data1 = { GPIO_SD_B1_03_USDHC1_DATA1 }, \
.data2 = { GPIO_SD_B1_04_USDHC1_DATA2 }, \
.data3 = { GPIO_SD_B1_05_USDHC1_DATA3 }, \
}
#define USDHC_DATA3_PULL_DOWN_ON_BOARD (1)
// Network definitions
// Transceiver Phy Parameters
#define ENET_PHY_ADDRESS (2)
#define ENET_PHY KSZ8081
#define ENET_PHY_OPS phyksz8081_ops
// 10/100 Ethernet PIN definitions
#define ENET_RESET_PIN &pin_GPIO_LPSR_12
#define ENET_INT_PIN &pin_GPIO_AD_12
#define IOMUX_TABLE_ENET \
{ IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00, 0, 0x06u }, \
{ IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01, 0, 0x06u }, \
{ IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN, 0, 0x06u }, \
{ IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00, 0, 0x02u }, \
{ IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01, 0, 0x02u }, \
{ IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN, 0, 0x06u }, \
{ IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK, 1, 0x03u }, \
{ IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER, 0, 0x06u }, \
{ IOMUXC_GPIO_AD_33_ENET_MDIO, 0, 0x06u }, \
{ IOMUXC_GPIO_AD_32_ENET_MDC, 0, 0x06u },
// A second ETH port is present.
#define ENET_DUAL_PORT (1)
// 1G Transceiver Phy Parameters
#define ENET_1_PHY_ADDRESS (1)
#define ENET_1_PHY RTL8211F
#define ENET_1_PHY_OPS phyrtl8211f_ops
// 1G Ethernet PIN definitions
// No INT pin for ENET_1G
#define ENET_1_RESET_PIN &pin_GPIO_DISP_B2_13
#define ENET_1_INT_PIN NULL
#define IOMUX_TABLE_ENET_1 \
{ IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN, 0, 0x08U }, \
{ IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK, 0, 0x08U }, \
{ IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00, 0, 0x08U }, \
{ IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01, 0, 0x08U }, \
{ IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02, 0, 0x08U }, \
{ IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03, 0, 0x08U }, \
{ IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03, 0, 0x0CU }, \
{ IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02, 0, 0x0CU }, \
{ IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01, 0, 0x0CU }, \
{ IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00, 0, 0x0CU }, \
{ IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN, 0, 0x0CU }, \
{ IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO, 0, 0x0CU }, \
{ IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO, 0, 0x06u }, \
{ IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC, 0, 0x06u },
// --- SEMC --- //
#define MIMXRT_IOMUXC_SEMC_DATA00 IOMUXC_GPIO_EMC_B1_00_SEMC_DATA00
#define MIMXRT_IOMUXC_SEMC_DATA01 IOMUXC_GPIO_EMC_B1_01_SEMC_DATA01
#define MIMXRT_IOMUXC_SEMC_DATA02 IOMUXC_GPIO_EMC_B1_02_SEMC_DATA02
#define MIMXRT_IOMUXC_SEMC_DATA03 IOMUXC_GPIO_EMC_B1_03_SEMC_DATA03
#define MIMXRT_IOMUXC_SEMC_DATA04 IOMUXC_GPIO_EMC_B1_04_SEMC_DATA04
#define MIMXRT_IOMUXC_SEMC_DATA05 IOMUXC_GPIO_EMC_B1_05_SEMC_DATA05
#define MIMXRT_IOMUXC_SEMC_DATA06 IOMUXC_GPIO_EMC_B1_06_SEMC_DATA06
#define MIMXRT_IOMUXC_SEMC_DATA07 IOMUXC_GPIO_EMC_B1_07_SEMC_DATA07
#define MIMXRT_IOMUXC_SEMC_DATA08 IOMUXC_GPIO_EMC_B1_30_SEMC_DATA08
#define MIMXRT_IOMUXC_SEMC_DATA09 IOMUXC_GPIO_EMC_B1_31_SEMC_DATA09
#define MIMXRT_IOMUXC_SEMC_DATA10 IOMUXC_GPIO_EMC_B1_32_SEMC_DATA10
#define MIMXRT_IOMUXC_SEMC_DATA11 IOMUXC_GPIO_EMC_B1_33_SEMC_DATA11
#define MIMXRT_IOMUXC_SEMC_DATA12 IOMUXC_GPIO_EMC_B1_34_SEMC_DATA12
#define MIMXRT_IOMUXC_SEMC_DATA13 IOMUXC_GPIO_EMC_B1_35_SEMC_DATA13
#define MIMXRT_IOMUXC_SEMC_DATA14 IOMUXC_GPIO_EMC_B1_36_SEMC_DATA14
#define MIMXRT_IOMUXC_SEMC_DATA15 IOMUXC_GPIO_EMC_B1_37_SEMC_DATA15
#define MIMXRT_IOMUXC_SEMC_ADDR00 IOMUXC_GPIO_EMC_B1_09_SEMC_ADDR00
#define MIMXRT_IOMUXC_SEMC_ADDR01 IOMUXC_GPIO_EMC_B1_10_SEMC_ADDR01
#define MIMXRT_IOMUXC_SEMC_ADDR02 IOMUXC_GPIO_EMC_B1_11_SEMC_ADDR02
#define MIMXRT_IOMUXC_SEMC_ADDR03 IOMUXC_GPIO_EMC_B1_12_SEMC_ADDR03
#define MIMXRT_IOMUXC_SEMC_ADDR04 IOMUXC_GPIO_EMC_B1_13_SEMC_ADDR04
#define MIMXRT_IOMUXC_SEMC_ADDR05 IOMUXC_GPIO_EMC_B1_14_SEMC_ADDR05
#define MIMXRT_IOMUXC_SEMC_ADDR06 IOMUXC_GPIO_EMC_B1_15_SEMC_ADDR06
#define MIMXRT_IOMUXC_SEMC_ADDR07 IOMUXC_GPIO_EMC_B1_16_SEMC_ADDR07
#define MIMXRT_IOMUXC_SEMC_ADDR08 IOMUXC_GPIO_EMC_B1_17_SEMC_ADDR08
#define MIMXRT_IOMUXC_SEMC_ADDR09 IOMUXC_GPIO_EMC_B1_18_SEMC_ADDR09
#define MIMXRT_IOMUXC_SEMC_ADDR10 IOMUXC_GPIO_EMC_B1_23_SEMC_ADDR10
#define MIMXRT_IOMUXC_SEMC_ADDR11 IOMUXC_GPIO_EMC_B1_19_SEMC_ADDR11
#define MIMXRT_IOMUXC_SEMC_ADDR12 IOMUXC_GPIO_EMC_B1_20_SEMC_ADDR12
#define MIMXRT_IOMUXC_SEMC_BA0 IOMUXC_GPIO_EMC_B1_21_SEMC_BA0
#define MIMXRT_IOMUXC_SEMC_BA1 IOMUXC_GPIO_EMC_B1_22_SEMC_BA1
#define MIMXRT_IOMUXC_SEMC_CAS IOMUXC_GPIO_EMC_B1_24_SEMC_CAS
#define MIMXRT_IOMUXC_SEMC_RAS IOMUXC_GPIO_EMC_B1_25_SEMC_RAS
#define MIMXRT_IOMUXC_SEMC_CLK IOMUXC_GPIO_EMC_B1_26_SEMC_CLK
#define MIMXRT_IOMUXC_SEMC_CKE IOMUXC_GPIO_EMC_B1_27_SEMC_CKE
#define MIMXRT_IOMUXC_SEMC_WE IOMUXC_GPIO_EMC_B1_28_SEMC_WE
#define MIMXRT_IOMUXC_SEMC_DM00 IOMUXC_GPIO_EMC_B1_08_SEMC_DM00
#define MIMXRT_IOMUXC_SEMC_DM01 IOMUXC_GPIO_EMC_B1_38_SEMC_DM01
#define MIMXRT_IOMUXC_SEMC_DQS IOMUXC_GPIO_EMC_B1_39_SEMC_DQS
#define MIMXRT_IOMUXC_SEMC_CS0 IOMUXC_GPIO_EMC_B1_29_SEMC_CS0
#define MIMXRT_IOMUXC_SEMC_DATA16 IOMUXC_GPIO_EMC_B2_00_SEMC_DATA16
#define MIMXRT_IOMUXC_SEMC_DATA17 IOMUXC_GPIO_EMC_B2_01_SEMC_DATA17
#define MIMXRT_IOMUXC_SEMC_DATA18 IOMUXC_GPIO_EMC_B2_02_SEMC_DATA18
#define MIMXRT_IOMUXC_SEMC_DATA19 IOMUXC_GPIO_EMC_B2_03_SEMC_DATA19
#define MIMXRT_IOMUXC_SEMC_DATA20 IOMUXC_GPIO_EMC_B2_04_SEMC_DATA20
#define MIMXRT_IOMUXC_SEMC_DATA21 IOMUXC_GPIO_EMC_B2_05_SEMC_DATA21
#define MIMXRT_IOMUXC_SEMC_DATA22 IOMUXC_GPIO_EMC_B2_06_SEMC_DATA22
#define MIMXRT_IOMUXC_SEMC_DATA23 IOMUXC_GPIO_EMC_B2_07_SEMC_DATA23
#define MIMXRT_IOMUXC_SEMC_DM02 IOMUXC_GPIO_EMC_B2_08_SEMC_DM02
#define MIMXRT_IOMUXC_SEMC_DATA24 IOMUXC_GPIO_EMC_B2_09_SEMC_DATA24
#define MIMXRT_IOMUXC_SEMC_DATA25 IOMUXC_GPIO_EMC_B2_10_SEMC_DATA25
#define MIMXRT_IOMUXC_SEMC_DATA26 IOMUXC_GPIO_EMC_B2_11_SEMC_DATA26
#define MIMXRT_IOMUXC_SEMC_DATA27 IOMUXC_GPIO_EMC_B2_12_SEMC_DATA27
#define MIMXRT_IOMUXC_SEMC_DATA28 IOMUXC_GPIO_EMC_B2_13_SEMC_DATA28
#define MIMXRT_IOMUXC_SEMC_DATA29 IOMUXC_GPIO_EMC_B2_14_SEMC_DATA29
#define MIMXRT_IOMUXC_SEMC_DATA30 IOMUXC_GPIO_EMC_B2_15_SEMC_DATA30
#define MIMXRT_IOMUXC_SEMC_DATA31 IOMUXC_GPIO_EMC_B2_16_SEMC_DATA31
#define MIMXRT_IOMUXC_SEMC_DM03 IOMUXC_GPIO_EMC_B2_17_SEMC_DM03
#define MIMXRT_IOMUXC_SEMC_DQS4 IOMUXC_GPIO_EMC_B2_18_SEMC_DQS4
#if MICROPY_PY_MACHINE_I2S
#define MICROPY_BOARD_ROOT_POINTERS \
struct _machine_i2s_obj_t *machine_i2s_obj[MICROPY_HW_I2S_NUM];
#endif
Reference in New Issue Copy Permalink