djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e9d81c2826
circuitpython/ports/atmel-samd/boards/pybadge/pins.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

76 lines
3.6 KiB
C
Raw Normal View History

Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
#include "shared-bindings/board/__init__.h"
Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786
2020-12-02 21:05:29 -05:00
#include "supervisor/board.h"
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
#include "shared-module/displayio/__init__.h"
change board dicts to include a common macro with __name__
2021-09-03 09:16:33 -04:00
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
add board.ID
2021-08-13 18:51:09 -04:00
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA05) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB08) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PB09) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA04) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA06) },
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PB01) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PB04) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PB03) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PB02) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB17) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PB16) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PB03) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PB02) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA14) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA16) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA18) },
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB14) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA15) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA19) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA20) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA21) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA22) },
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA23) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA23) },
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
// UART
{ MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB17) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB16) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
// I2C
{ MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA12) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA13) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
// SPI
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA17) },
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB22) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB23) },
// Special named pins
{ MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_PB04) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ACCELEROMETER_INTERRUPT), MP_ROM_PTR(&pin_PB14) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_PA02) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_PA27) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_LATCH), MP_ROM_PTR(&pin_PB00) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_OUT), MP_ROM_PTR(&pin_PB30) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_CLOCK), MP_ROM_PTR(&pin_PB31) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
// TFT control pins
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_LITE), MP_ROM_PTR(&pin_PA01) },
Rev D/E (beta) hardware!
2019-04-10 08:35:38 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_PB15) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_PB13) },
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RST), MP_ROM_PTR(&pin_PA00) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
{ MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_PB07) },
{ MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_PB05) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
add board.STEMMA_I2C alias to some boards
2022-02-01 19:18:46 -05:00
{ MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
Add basic Pybadge board definition Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
2019-02-25 15:09:09 -05:00
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)}
};
change board dicts to include a common macro with __name__
2021-09-03 09:16:33 -04:00
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
Reference in New Issue Copy Permalink