circuitpython/ports/atmel-samd/boards/pyportal_titano/board.c

132 lines
4.8 KiB
C
Raw Normal View History

2019-08-07 17:10:31 -04:00
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
#include "mpconfigboard.h"
#include "hal/include/hal_gpio.h"
2019-08-07 18:29:20 -04:00
#include "shared-bindings/busio/SPI.h"
#include "shared-bindings/displayio/FourWire.h"
2019-08-07 17:10:31 -04:00
#include "shared-module/displayio/__init__.h"
#include "shared-module/displayio/mipi_constants.h"
#include "tick.h"
#define DELAY 0x80
uint8_t display_init_sequence[] = {
0x01, DELAY, 100/5, // Soft reset, then delay 10 ms
0xB9, 3, 0xFF, 0x83, 0x57, // Extension command set
0xFF, DELAY, 500/5,
0xB3, 4, 0x80, 0x00, 0x06, 0x06, // 0x80 enables SDO pin (0x00 disables)
0xB6, 2, 0x01, 0x25, // -1.52V
0xB0, 1, 0x68, // Normal mode 70Hz, Idle mode 55 Hz
0xCC, 1, 0x05,
0xB1, 6,
0x00, // Not deep standby
0x15, // BT
0x1C, // VSPR
0x1C, // VSNR
0x83, // AP
0xAA, // FS
0xC0, 6,
0x50, // OPON normal
0x50, // OPON idle
0x01, // STBA
0x3C, // STBA
0x1E, // STBA
0x08, // GEN
0xB4, 7,
0x02, // NW 0x02
0x40, // RTN
0x00, // DIV
0x2A, // DUM
0x2A, // DUM
0x0D, // GDON
0x78, // GDOFF
2019-08-07 18:29:20 -04:00
0xE0, 34,
0x02, 0x0A, 0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b,
0x42, 0x3A, 0x27, 0x1B, 0x08, 0x09, 0x03, 0x02, 0x0A,
0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A,
0x27, 0x1B, 0x08, 0x09, 0x03, 0x00, 0x01,
0x3a, 1, 0x55,
0x36, 1, 0x00,
0x11, DELAY, 150/5, // Exit Sleep, then delay 150 ms
0x29, DELAY, 50/5
2019-08-07 17:10:31 -04:00
};
void board_init(void) {
2019-08-07 18:29:20 -04:00
busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
common_hal_busio_spi_construct(spi, &pin_PA13, &pin_PA12, &pin_PA14);
common_hal_busio_spi_never_reset(spi);
displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
bus->base.type = &displayio_fourwire_type;
common_hal_displayio_fourwire_construct(bus,
spi,
&pin_PB05, // TFT_DC Command or data
&pin_PB06, // TFT_CS Chip select
&pin_PA00, // TFT_RST Reset
24000000);
2019-08-07 17:10:31 -04:00
displayio_display_obj_t* display = &displays[0].display;
display->base.type = &displayio_display_type;
common_hal_displayio_display_construct(display,
bus,
480, // Width
320, // Height
2019-08-07 17:10:31 -04:00
0, // column start
0, // row start
270, // rotation
2019-08-07 17:10:31 -04:00
16, // Color depth
false, // grayscale
false, // pixels_in_byte_share_row (unused for depths > 8)
1, // bytes per cell. Only valid for depths < 8
false, // reverse_pixels_in_byte. Only valid for depths < 8
MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
0x37, // Set vertical scroll command
display_init_sequence,
sizeof(display_init_sequence),
&pin_PB31, // Backlight pin
NO_BRIGHTNESS_COMMAND,
1.0f, // brightness (ignored)
true, // auto_brightness
false, // single_byte_bounds
false, // data_as_commands
true, // auto_refresh
60); // native_frames_per_second
2019-08-07 17:10:31 -04:00
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}