djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/atmel-samd/rgb_led_status.c

169 lines
6.1 KiB
C
Raw Normal View History

atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#include "asf/common2/services/delay/delay.h"
#include "asf/sam0/drivers/port/port.h"
#include "mphalport.h"
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#include "common-hal/microcontroller/Pin.h"
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#include "shared-bindings/bitbangio/SPI.h"
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#include "shared-bindings/busio/SPI.h"
Split up nativeio. This was done to allow greatly granularity when deciding what functionality is built into each board's build. For example, this way pulseio can be omitted to allow for something else such as touchio.
2017-04-10 16:32:19 -04:00
#include "shared-bindings/digitalio/DigitalInOut.h"
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#include "shared-bindings/neopixel_write/__init__.h"
#include "shared-module/bitbangio/types.h"
#include "rgb_led_status.h"
#include "samd21_pins.h"
#ifdef MICROPY_HW_NEOPIXEL
static uint8_t status_neopixel_color[3];
Split up nativeio. This was done to allow greatly granularity when deciding what functionality is built into each board's build. For example, this way pulseio can be omitted to allow for something else such as touchio.
2017-04-10 16:32:19 -04:00
static digitalio_digitalinout_obj_t status_neopixel;
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
static uint8_t status_apa102_color[12] = {0, 0, 0, 0, 0xff, 0, 0, 0};
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#ifdef CIRCUITPY_BITBANG_APA102
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
static bitbangio_spi_obj_t status_apa102;
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#else
busio_spi_obj_t status_apa102;
#endif
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
static uint32_t current_status_color = 0;
#endif
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
void rgb_led_status_init() {
#ifdef MICROPY_HW_NEOPIXEL
Split up nativeio. This was done to allow greatly granularity when deciding what functionality is built into each board's build. For example, this way pulseio can be omitted to allow for something else such as touchio.
2017-04-10 16:32:19 -04:00
common_hal_digitalio_digitalinout_construct(&status_neopixel, MICROPY_HW_NEOPIXEL);
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
// Pretend we aren't using the pins. digitalio.DigitalInOut
// will mark them as used.
neopixel_in_use = false;
Split up nativeio. This was done to allow greatly granularity when deciding what functionality is built into each board's build. For example, this way pulseio can be omitted to allow for something else such as touchio.
2017-04-10 16:32:19 -04:00
common_hal_digitalio_digitalinout_switch_to_output(&status_neopixel, false, DRIVE_MODE_PUSH_PULL);
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#ifdef CIRCUITPY_BITBANG_APA102
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
shared_module_bitbangio_spi_construct(&status_apa102,
MICROPY_HW_APA102_SCK,
MICROPY_HW_APA102_MOSI,
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
mp_const_none);
#else
if (status_apa102.current_baudrate > 0) {
// Don't use spi_deinit because that leads to infinite
// recursion because reset_pin may call
// rgb_led_status_init.
spi_disable(&status_apa102.spi_master_instance);
}
common_hal_busio_spi_construct(&status_apa102,
MICROPY_HW_APA102_SCK,
MICROPY_HW_APA102_MOSI,
mp_const_none);
#endif
// Pretend we aren't using the pins. bitbangio.SPI will
// mark them as used.
apa102_mosi_in_use = false;
apa102_sck_in_use = false;
#ifdef CIRCUITPY_BITBANG_APA102
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
shared_module_bitbangio_spi_try_lock(&status_apa102);
shared_module_bitbangio_spi_configure(&status_apa102, 100000, 0, 1, 8);
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#else
common_hal_busio_spi_try_lock(&status_apa102);
common_hal_busio_spi_configure(&status_apa102, 100000, 0, 1, 8);
#endif
#endif
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
// Force a write of the current status color.
uint32_t rgb = current_status_color;
current_status_color = 0;
new_status_color(rgb);
#endif
}
void reset_status_led() {
#ifdef MICROPY_HW_NEOPIXEL
reset_pin(MICROPY_HW_NEOPIXEL->pin);
#endif
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
reset_pin(MICROPY_HW_APA102_MOSI->pin);
reset_pin(MICROPY_HW_APA102_SCK->pin);
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
}
void new_status_color(uint32_t rgb) {
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
if (current_status_color == rgb) {
return;
}
current_status_color = rgb;
#endif
#ifdef MICROPY_HW_NEOPIXEL
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
if (neopixel_in_use) {
return;
}
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
status_neopixel_color[0] = (rgb >> 8) & 0xff;
status_neopixel_color[1] = (rgb >> 16) & 0xff;
status_neopixel_color[2] = rgb & 0xff;
atmel-samd: Fix build by correcting internal neopixel writes.
2017-02-19 11:39:34 -05:00
common_hal_neopixel_write(&status_neopixel, status_neopixel_color, 3);
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
if (apa102_mosi_in_use || apa102_sck_in_use) {
return;
}
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
status_apa102_color[5] = rgb & 0xff;
status_apa102_color[6] = (rgb >> 8) & 0xff;
status_apa102_color[7] = (rgb >> 16) & 0xff;
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#ifdef CIRCUITPY_BITBANG_APA102
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
shared_module_bitbangio_spi_write(&status_apa102, status_apa102_color, 8);
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#else
common_hal_busio_spi_write(&status_apa102, status_apa102_color, 8);
#endif
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
}
void temp_status_color(uint32_t rgb) {
#ifdef MICROPY_HW_NEOPIXEL
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
if (neopixel_in_use) {
return;
}
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
uint8_t colors[3] = {(rgb >> 8) & 0xff, (rgb >> 16) & 0xff, rgb & 0xff};
atmel-samd: Fix build by correcting internal neopixel writes.
2017-02-19 11:39:34 -05:00
common_hal_neopixel_write(&status_neopixel, colors, 3);
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
if (apa102_mosi_in_use || apa102_sck_in_use) {
return;
}
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
uint8_t colors[12] = {0, 0, 0, 0, 0xff, rgb & 0xff, (rgb >> 8) & 0xff, (rgb >> 16) & 0xff, 0x0, 0x0, 0x0, 0x0};
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#ifdef CIRCUITPY_BITBANG_APA102
shared_module_bitbangio_spi_write(&status_apa102, colors, 12);
#else
common_hal_busio_spi_write(&status_apa102, colors, 12);
#endif
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
}
void clear_temp_status() {
#ifdef MICROPY_HW_NEOPIXEL
atmel-samd: Fix build by correcting internal neopixel writes.
2017-02-19 11:39:34 -05:00
common_hal_neopixel_write(&status_neopixel, status_neopixel_color, 3);
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
atmel-samd: Rework status LED implementation * Track status pin use by user code separately so it can take over the pins and then give them back. * Switch to hardware SPI for APA102 on Gemma and Trinket. * Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 18:24:50 -04:00
#ifdef CIRCUITPY_BITBANG_APA102
shared_module_bitbangio_spi_write(&status_apa102, status_apa102_color, 8);
#else
common_hal_busio_spi_write(&status_apa102, status_apa102_color, 8);
#endif
atmel-samd: Add APA102 support and flash more advanced status. The new sequence is as follows: * Solid blue during the boot/settings script. * Solid green during the main/code script. * After main while waiting to enter repl or reset: * Fading green once main is done successfully. * On error produce a series of flashes: * Long flash color of script. * Long flash color of error: * Green = IndentationError * Cyan = SyntaxError * White = NameError * Orange = OSError * Yellow = Other error * Line number of the exception by digit. Number of flashes represents value. * Thousands = White * Hundreds = Blue * Tens = Yellow * Ones = Cyan * Off for a period and then repeats. At any point a write to the flash storage will flicker red. Fixes #63
2016-12-09 22:27:41 -05:00
#endif
}
uint32_t color_brightness(uint32_t color, uint8_t brightness) {
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
uint32_t result = ((color & 0xff0000) * brightness / 255) & 0xff0000;
result += ((color & 0xff00) * brightness / 255) & 0xff00;
result += ((color & 0xff) * brightness / 255) & 0xff;
return result;
#else
return color;
#endif
}