circuitpython/cc3200/hal/inc/hw_stack_die_ctrl.h

765 lines
41 KiB
C
Raw Normal View History

//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_STACK_DIE_CTRL_H__
#define __HW_STACK_DIE_CTRL_H__
//*****************************************************************************
//
// The following are defines for the STACK_DIE_CTRL register offsets.
//
//*****************************************************************************
#define STACK_DIE_CTRL_O_STK_UP_RESET \
0x00000000 // Can be written only by Base
// Processor. Writing to this
// register will reset the stack
// processor reset will be
// de-asserted upon clearing this
// register.
#define STACK_DIE_CTRL_O_SR_MASTER_PRIORITY \
0x00000004 // This register defines who among
// base processor and stack
// processor have highest priority
// for Sram Access. Can be written
// only by Base Processor.
#define STACK_DIE_CTRL_O_STK_SR_ACC_CTL_BK2 \
0x00000008 // In Spinlock mode this Register
// defines who among base processor
// and stack processor have access
// to Sram Bank2 right now. In
// Handshake mode this Register
// defines who among base processor
// and stack processor have access
// to Sram Bank2 and Bank3 right
// now. Its Clear only register and
// is set by hardware. Lower bit can
// be cleared only by Base Processor
// and Upper bit Cleared only by the
// Stack processor.
#define STACK_DIE_CTRL_O_BASE_UP_ACC_REQ_BK2 \
0x0000000C // In Spinlock mode whenever Base
// processor wants the access to
// Sram Bank2 it should request for
// it by writing into this register.
// It'll get interrupt whenever it
// is granted. In Handshake mode
// this bit will be set by Stack
// processor. Its a set only bit and
// is cleared by HW when the request
// is granted.
#define STACK_DIE_CTRL_O_STK_UP_ACC_REQ_BK2 \
0x00000010 // In Spinlock mode Whenever Stack
// processor wants the access to
// Sram Bank2 it should request for
// it by writing into this register.
// It'll get interrupt whenever it
// is granted. In Handshake mode
// this bit will be set by the Base
// processor. Its a set only bit and
// is cleared by HW when the request
// is granted.
#define STACK_DIE_CTRL_O_STK_SR_ACC_CTL_BK3 \
0x00000014 // Register defines who among base
// processor and stack processor
// have access to Sram Bank3 right
// now. Its Clear only register and
// is set by hardware. Lower bit can
// be cleared only by Base Processor
// and Upper bit Cleared only by the
// Stack processor.
#define STACK_DIE_CTRL_O_BASE_UP_ACC_REQ_BK3 \
0x00000018 // In Spinlock mode whenever Base
// processor wants the access to
// Sram Bank3 it should request for
// it by writing into this register.
// It'll get interrupt whenever it
// is granted. In Handshake mode
// this bit will be set by Stack
// processor. Its a set only bit and
// is cleared by HW when the request
// is granted.
#define STACK_DIE_CTRL_O_STK_UP_ACC_REQ_BK3 \
0x0000001C // In Spinlock mode Whenever Stack
// processor wants the access to
// Sram Bank3 it should request for
// it by writing into this register.
// It'll get interrupt whenever it
// is granted. In Handshake mode
// this bit will be set by the Base
// processor. Its a set only bit and
// is cleared by HW when the request
// is granted.
#define STACK_DIE_CTRL_O_RDSM_CFG_CPU \
0x00000020 // Read State Machine timing
// configuration register. Generally
// Bit 4 and 3 will be identical.
// For stacked die always 43 are 0
// and 6:5 == 1 for 120Mhz.
#define STACK_DIE_CTRL_O_RDSM_CFG_EE \
0x00000024 // Read State Machine timing
// configuration register. Generally
// Bit 4 and 3 will be identical.
// For stacked die always 43 are 0
// and 6:5 == 1 for 120Mhz.
#define STACK_DIE_CTRL_O_BASE_UP_IRQ_LOG \
0x00000028 // Reading this register Base
// procesor will able to know the
// reason for the interrupt. This is
// clear only register - set by HW
// upon an interrupt to Base
// processor and can be cleared only
// by BASE processor.
#define STACK_DIE_CTRL_O_STK_UP_IRQ_LOG \
0x0000002C // Reading this register Stack
// procesor will able to know the
// reason for the interrupt. This is
// clear only register - set by HW
// upon an interrupt to Stack
// processor and can be cleared only
// by Stack processor.
#define STACK_DIE_CTRL_O_STK_CLK_EN \
0x00000030 // Can be written only by base
// processor. Controls the enable
// pin of the cgcs for the clocks
// going to CM3 dft ctrl block and
// Sram.
#define STACK_DIE_CTRL_O_SPIN_LOCK_MODE \
0x00000034 // Can be written only by the base
// processor. Decides the ram
// sharing mode :: handshake or
// Spinlock mode.
#define STACK_DIE_CTRL_O_BUS_FAULT_ADDR \
0x00000038 // Stores the last bus fault
// address.
#define STACK_DIE_CTRL_O_BUS_FAULT_CLR \
0x0000003C // write only registers on read
// returns 0.W Write 1 to clear the
// bust fault to store the new bus
// fault address
#define STACK_DIE_CTRL_O_RESET_CAUSE \
0x00000040 // Reset cause value captured from
// the ICR_CLKRST block.
#define STACK_DIE_CTRL_O_WDOG_TIMER_EVENT \
0x00000044 // Watchdog timer event value
// captured from the ICR_CLKRST
// block
#define STACK_DIE_CTRL_O_DMA_REQ \
0x00000048 // To send Dma Request to bottom
// die.
#define STACK_DIE_CTRL_O_SRAM_JUMP_OFFSET_ADDR \
0x0000004C // Address offset within SRAM to
// which CM3 should jump after
// reset.
#define STACK_DIE_CTRL_O_SW_REG1 \
0x00000050 // These are sw registers for
// topdie processor and bottom die
// processor to communicate. Both
// can set and read these registers.
// In case of write clash bottom
// die's processor wins and top die
// processor access is ignored.
#define STACK_DIE_CTRL_O_SW_REG2 \
0x00000054 // These are sw registers for
// topdie processor and bottom die
// processor to communicate. Both
// can set and read these registers.
// In case of write clash bottom
// die's processor wins and top die
// processor access is ignored.
#define STACK_DIE_CTRL_O_FMC_SLEEP_CTL \
0x00000058 // By posting the request Flash can
// be put into low-power mode
// (Sleep) without powering down the
// Flash. Earlier (in Garnet) this
// was fully h/w controlled and the
// control for this was coming from
// SysCtl while entering into Cortex
// Deep-sleep mode. But for our
// device the D2D i/f doesnt support
// this. The Firmware has to program
// the register in the top-die for
// entering into this mode and wait
// for an interrupt.
#define STACK_DIE_CTRL_O_MISC_CTL \
0x0000005C // Miscellanious control register.
#define STACK_DIE_CTRL_O_SW_DFT_CTL \
0x000000FC // DFT control and status bits
#define STACK_DIE_CTRL_O_PADN_CTL_0 \
0x00000100 // Mainly for For controlling the
// pads OEN pins. There are total 60
// pads and hence 60 control registe
// i.e n value varies from 0 to 59.
// Here is the mapping for the
// pad_ctl register number and the
// functionality : 0 D2DPAD_DMAREQ1
// 1 D2DPAD_DMAREQ0 2
// D2DPAD_INT2BASE 3 D2DPAD_PIOSC 4
// D2DPAD_RST_N 5 D2DPAD_POR_RST_N 6
// D2DPAD_HCLK 7 D2DPAD_JTAG_TDO 8
// D2DPAD_JTAG_TCK 9 D2DPAD_JTAG_TMS
// 10 D2DPAD_JTAG_TDI 11-27
// D2DPAD_FROMSTACK[D2D_FROMSTACK_SIZE
// -1:0] 28-56 D2DPAD_TOSTACK
// [D2D_TOSTACK_SIZE -1:0] 57-59
// D2DPAD_SPARE [D2D_SPARE_PAD_SIZE
// -1:0] 0:00
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_STK_UP_RESET register.
//
//******************************************************************************
#define STACK_DIE_CTRL_STK_UP_RESET_UP_RESET \
0x00000001 // 1 :Assert Reset 0 : Deassert the
// Reset
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_SR_MASTER_PRIORITY register.
//
//******************************************************************************
#define STACK_DIE_CTRL_SR_MASTER_PRIORITY_PRIORITY_M \
0x00000003 // 00 : Equal Priority 01 : Stack
// Processor have priority 10 : Base
// Processor have priority 11 :
// Unused
#define STACK_DIE_CTRL_SR_MASTER_PRIORITY_PRIORITY_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_STK_SR_ACC_CTL_BK2 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_STK_SR_ACC_CTL_BK2_STK_UP_ACCSS \
0x00000002 // Stack Processor should clear it
// when it is done with the sram
// bank usage. Set by HW It is set
// when Stack Processor is granted
// the access to this bank
#define STACK_DIE_CTRL_STK_SR_ACC_CTL_BK2_BASE_UP_ACCSS \
0x00000001 // Base Processor should clear it
// when it is done wth the sram
// usage. Set by HW It is set when
// Base Processor is granted the
// access to this bank
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_BASE_UP_ACC_REQ_BK2 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_BASE_UP_ACC_REQ_BK2_ACCSS_REQ \
0x00000001 // Base Processor will set when
// Sram access is needed in Spin
// Lock mode. In Handshake mode
// Stack Processor will set to
// inform Base Processor that it is
// done with the processing of data
// in SRAM and is now ready to use
// by the base processor.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_STK_UP_ACC_REQ_BK2 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_STK_UP_ACC_REQ_BK2_ACCSS_REQ \
0x00000001 // Stack Processor will set when
// Sram access is needed in Spin
// Lock mode. In Handshake mode Base
// Processor will set to inform
// Stack Processor to start
// processing the data in the Ram.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_STK_SR_ACC_CTL_BK3 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_STK_SR_ACC_CTL_BK3_STK_UP_ACCSS \
0x00000002 // Stack Processor should clear it
// when it is done with the sram
// bank usage. Set by HW It is set
// when Stack Processor is granted
// the access to this bank.
#define STACK_DIE_CTRL_STK_SR_ACC_CTL_BK3_BASE_UP_ACCSS \
0x00000001 // Base Processor should clear it
// when it is done wth the sram
// usage. Set by HW it is set when
// Base Processor is granted the
// access to this bank.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_BASE_UP_ACC_REQ_BK3 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_BASE_UP_ACC_REQ_BK3_ACCSS_REQ \
0x00000001 // Base Processor will set when
// Sram access is needed in Spin
// Lock mode. Not used in handshake
// mode.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_STK_UP_ACC_REQ_BK3 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_STK_UP_ACC_REQ_BK3_ACCSS_REQ \
0x00000001 // Stack Processor will set when
// Sram access is needed in Spin
// Lock mode.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_RDSM_CFG_CPU register.
//
//******************************************************************************
#define STACK_DIE_CTRL_RDSM_CFG_CPU_FLCLK_PULSE_WIDTH_M \
0x000000C0 // Bank Clock Hi Time 00 : HCLK
// pulse 01 : 1 cycle of HCLK 10 :
// 1.5 cycles of HCLK 11 : 2 cycles
// of HCLK
#define STACK_DIE_CTRL_RDSM_CFG_CPU_FLCLK_PULSE_WIDTH_S 6
#define STACK_DIE_CTRL_RDSM_CFG_CPU_FLCLK_SENSE \
0x00000020 // FLCLK 0 : indicates flash clock
// rise aligns on HCLK rise 1 :
// indicates flash clock rise aligns
// on HCLK fall
#define STACK_DIE_CTRL_RDSM_CFG_CPU_PIPELINE_FLDATA \
0x00000010 // 0 : Always register flash rdata
// before sending to CPU 1 : Drive
// Flash rdata directly out on MISS
// (Both ICODE / DCODE)
#define STACK_DIE_CTRL_RDSM_CFG_CPU_READ_WAIT_STATE_M \
0x0000000F // Number of wait states inserted
#define STACK_DIE_CTRL_RDSM_CFG_CPU_READ_WAIT_STATE_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_RDSM_CFG_EE register.
//
//******************************************************************************
#define STACK_DIE_CTRL_RDSM_CFG_EE_FLCLK_PULSE_WIDTH_M \
0x000000C0 // Bank Clock Hi Time 00 : HCLK
// pulse 01 : 1 cycle of HCLK 10 :
// 1.5 cycles of HCLK 11 : 2 cycles
// of HCLK
#define STACK_DIE_CTRL_RDSM_CFG_EE_FLCLK_PULSE_WIDTH_S 6
#define STACK_DIE_CTRL_RDSM_CFG_EE_FLCLK_SENSE \
0x00000020 // FLCLK 0 : indicates flash clock
// rise aligns on HCLK rise 1 :
// indicates flash clock rise aligns
// on HCLK fall
#define STACK_DIE_CTRL_RDSM_CFG_EE_PIPELINE_FLDATA \
0x00000010 // 0 : Always register flash rdata
// before sending to CPU 1 : Drive
// Flash rdata directly out on MISS
// (Both ICODE / DCODE)
#define STACK_DIE_CTRL_RDSM_CFG_EE_READ_WAIT_STATE_M \
0x0000000F // Number of wait states inserted
#define STACK_DIE_CTRL_RDSM_CFG_EE_READ_WAIT_STATE_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_BASE_UP_IRQ_LOG register.
//
//******************************************************************************
#define STACK_DIE_CTRL_BASE_UP_IRQ_LOG_SR_BK3_REL \
0x00000010 // Set when Relinquish Interrupt
// sent to Base processor for Bank3.
#define STACK_DIE_CTRL_BASE_UP_IRQ_LOG_SR_BK2_RELEASE \
0x00000008 // Set when Relinquish Interrupt
// sent to Base processor for Bank2.
#define STACK_DIE_CTRL_BASE_UP_IRQ_LOG_SR_BK3_GRANT \
0x00000004 // Set when Bank3 is granted to
// Base processor.
#define STACK_DIE_CTRL_BASE_UP_IRQ_LOG_SR_BK2_GRANT \
0x00000002 // Set when Bank2 is granted to
// BAse processor.
#define STACK_DIE_CTRL_BASE_UP_IRQ_LOG_SR_INVAL_ACCSS \
0x00000001 // Set when there Base processor do
// an Invalid access to Sram. Ex :
// Accessing the bank which is not
// granted for BAse processor.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_STK_UP_IRQ_LOG register.
//
//******************************************************************************
#define STACK_DIE_CTRL_STK_UP_IRQ_LOG_SR_BK3_REL \
0x00000008 // Set when Relinquish Interrupt
// sent to Stack processor for
// Bank3.
#define STACK_DIE_CTRL_STK_UP_IRQ_LOG_SR_BK2_REL \
0x00000004 // Set when Relinquish Interrupt
// sent to Stack processor for
// Bank2.
#define STACK_DIE_CTRL_STK_UP_IRQ_LOG_SR_BK3_GRANT \
0x00000002 // Set when Bank3 is granted to
// Stack processor.
#define STACK_DIE_CTRL_STK_UP_IRQ_LOG_SR_BK2_GRANT \
0x00000001 // Set when Bank2 is granted to
// Stack processor.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_STK_CLK_EN register.
//
//******************************************************************************
#define STACK_DIE_CTRL_STK_CLK_EN_SR_CLK \
0x00000004 // Enable the clock going to sram.
#define STACK_DIE_CTRL_STK_CLK_EN_DFT_CTRL_CLK \
0x00000002 // Enable the clock going to dft
// control block
#define STACK_DIE_CTRL_STK_CLK_EN_STK_UP_CLK \
0x00000001 // Enable the clock going to Cm3
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_SPIN_LOCK_MODE register.
//
//******************************************************************************
#define STACK_DIE_CTRL_SPIN_LOCK_MODE_MODE \
0x00000001 // 0 : Handshake Mode 1 : Spinlock
// mode.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_BUS_FAULT_ADDR register.
//
//******************************************************************************
#define STACK_DIE_CTRL_BUS_FAULT_ADDR_ADDRESS_M \
0xFFFFFFFF // Fault Address
#define STACK_DIE_CTRL_BUS_FAULT_ADDR_ADDRESS_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_BUS_FAULT_CLR register.
//
//******************************************************************************
#define STACK_DIE_CTRL_BUS_FAULT_CLR_CLEAR \
0x00000001 // When set it'll clear the bust
// fault address register to store
// the new bus fault address
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_RESET_CAUSE register.
//
//******************************************************************************
#define STACK_DIE_CTRL_RESET_CAUSE_RST_CAUSE_M \
0xFFFFFFFF
#define STACK_DIE_CTRL_RESET_CAUSE_RST_CAUSE_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_WDOG_TIMER_EVENT register.
//
//******************************************************************************
#define STACK_DIE_CTRL_WDOG_TIMER_EVENT_WDOG_TMR_EVNT_M \
0xFFFFFFFF
#define STACK_DIE_CTRL_WDOG_TIMER_EVENT_WDOG_TMR_EVNT_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_DMA_REQ register.
//
//******************************************************************************
#define STACK_DIE_CTRL_DMA_REQ_DMAREQ1 \
0x00000002 // Generate DMAREQ1 on setting this
// bit.
#define STACK_DIE_CTRL_DMA_REQ_DMAREQ0 \
0x00000001 // Generate DMAREQ0 on setting this
// bit.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_SRAM_JUMP_OFFSET_ADDR register.
//
//******************************************************************************
#define STACK_DIE_CTRL_SRAM_JUMP_OFFSET_ADDR_ADDR_M \
0xFFFFFFFF
#define STACK_DIE_CTRL_SRAM_JUMP_OFFSET_ADDR_ADDR_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_SW_REG1 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_SW_REG1_NEWBITFIELD1_M \
0xFFFFFFFF
#define STACK_DIE_CTRL_SW_REG1_NEWBITFIELD1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_SW_REG2 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_SW_REG2_NEWBITFIELD1_M \
0xFFFFFFFF
#define STACK_DIE_CTRL_SW_REG2_NEWBITFIELD1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_FMC_SLEEP_CTL register.
//
//******************************************************************************
#define STACK_DIE_CTRL_FMC_SLEEP_CTL_FMC_LPM_ACK \
0x00000002 // captures the status of of
// fmc_lpm_ack
#define STACK_DIE_CTRL_FMC_SLEEP_CTL_FMC_LPM_REQ \
0x00000001 // When set assert
// iflpe2fmc_lpm_req to FMC.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_MISC_CTL register.
//
//******************************************************************************
#define STACK_DIE_CTRL_MISC_CTL_WDOG_RESET \
0x00000080 // 1 : will reset the async wdog
// timer runing on piosc clock
#define STACK_DIE_CTRL_MISC_CTL_FW_IRQ2 \
0x00000020 // Setting this Will send to
// interttupt to CM3
#define STACK_DIE_CTRL_MISC_CTL_FW_IRQ1 \
0x00000010 // Setting this Will send to
// interttupt to CM3
#define STACK_DIE_CTRL_MISC_CTL_FW_IRQ0 \
0x00000008 // Setting this Will send to
// interttupt to CM3
#define STACK_DIE_CTRL_MISC_CTL_FLB_TEST_MUX_CTL_BK3 \
0x00000004 // While testing Flash Setting this
// bit will Control the
// CE/STR/AIN/CLKIN going to flash
// banks 12 and 3. 0 : Control
// signals coming from FMC for Bank
// 3 goes to Bank3 1 : Control
// signals coming from FMC for Bank
// 0 goes to Bank2
#define STACK_DIE_CTRL_MISC_CTL_FLB_TEST_MUX_CTL_BK2 \
0x00000002 // While testing Flash Setting this
// bit will Control the
// CE/STR/AIN/CLKIN going to flash
// banks 12 and 3. 0 : Control
// signals coming from FMC for Bank
// 2 goes to Bank2 1 : Control
// signals coming from FMC for Bank
// 0 goes to Bank2
#define STACK_DIE_CTRL_MISC_CTL_FLB_TEST_MUX_CTL_BK1 \
0x00000001 // While testing Flash Setting this
// bit will Control the
// CE/STR/AIN/CLKIN going to flash
// banks 12 and 3. 0 : Control
// signals coming from FMC for Bank
// 1 goes to Bank1 1 : Control
// signals coming from FMC for Bank
// 0 goes to Bank1
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_SW_DFT_CTL register.
//
//******************************************************************************
#define STACK_DIE_CTRL_SW_DFT_CTL_FL_CTRL_OWNS \
0x20000000 // when set to '1' all flash
// control signals switch over to
// CM3 control when '0' it is under
// the D2D interface control
#define STACK_DIE_CTRL_SW_DFT_CTL_SWIF_CPU_READ \
0x10000000 // 1 indicates in SWIF mode the
// control signals to flash are from
// FMC CPU read controls the clock
// and address. that is one can give
// address via FMC and read through
// IDMEM.
#define STACK_DIE_CTRL_SW_DFT_CTL_CPU_DONE \
0x00800000 // 'CPU Done' bit for PBIST. Write
// '1' to indicate test done.
#define STACK_DIE_CTRL_SW_DFT_CTL_CPU_FAIL \
0x00400000 // 'CPU Fail' bit for PBIST. Write
// '1' to indicate test failed.
#define STACK_DIE_CTRL_SW_DFT_CTL_FLBK4_OWNS \
0x00001000 // when set to '1' flash bank 4
// (EEPROM) is owned by the CM3for
// reads over DCODE bus. When '0'
// access control given to D2D
// interface.
#define STACK_DIE_CTRL_SW_DFT_CTL_FLBK3_OWNS \
0x00000800 // when set to '1' flash bank 3 is
// owned by the CM3for reads over
// DCODE bus. When '0' access
// control given to D2D interface.
#define STACK_DIE_CTRL_SW_DFT_CTL_FLBK2_OWNS \
0x00000400 // when set to '1' flash bank 2 is
// owned by the CM3for reads over
// DCODE bus. When '0' access
// control given to D2D interface.
#define STACK_DIE_CTRL_SW_DFT_CTL_FLBK1_OWNS \
0x00000200 // when set to '1' flash bank 1 is
// owned by the CM3for reads over
// DCODE bus. When '0' access
// control given to D2D interface.
#define STACK_DIE_CTRL_SW_DFT_CTL_FLBK0_OWNS \
0x00000100 // when set to '1' flash bank 0 is
// owned by the CM3 for reads over
// DCODE bus. When '0' access
// control given to D2D interface.
//******************************************************************************
//
// The following are defines for the bit fields in the
// STACK_DIE_CTRL_O_PADN_CTL_0 register.
//
//******************************************************************************
#define STACK_DIE_CTRL_PADN_CTL_0_SPARE_PAD_DOUT \
0x00000008 // This bit is valid for only the
// spare pads ie for n=57 to 59.
// value to drive at the output of
// the pad
#define STACK_DIE_CTRL_PADN_CTL_0_SPARE_PAD_DIN \
0x00000004 // This bit is valid for only the
// spare pads ie for n=57 to 59.
// captures the 'Y' pin of the pad
// which is the data being driven
// into the die
#define STACK_DIE_CTRL_PADN_CTL_0_OEN2X \
0x00000002 // OEN2X control when '1' enables
// the output with 1x. Total drive
// strength is decided bu oen1x
// setting + oen2x setting.
#define STACK_DIE_CTRL_PADN_CTL_0_OEN1X \
0x00000001 // OEN1X control when '1' enables
// the output with 1x . Total drive
// strength is decided bu oen1x
// setting + oen2x setting.
#endif // __HW_STACK_DIE_CTRL_H__