circuitpython/nrf5/Makefile

# Select the board to build for: if not given on the command line,
# then default to pca10040.
BOARD ?= pca10040
ifeq ($(wildcard boards/$(BOARD)/.),)
$(error Invalid BOARD specified)
endif

# If SoftDevice is selected, try to use that one.
SD ?=
SD_LOWER = $(shell echo $(SD) | tr '[:upper:]' '[:lower:]')

# TODO: Verify that it is a valid target.


ifeq ($(SD), )
	# If the build directory is not given, make it reflect the board name.
	BUILD ?= build-$(BOARD)
	include ../py/mkenv.mk
	include boards/$(BOARD)/mpconfigboard.mk
else
	# If the build directory is not given, make it reflect the board name.
	BUILD ?= build-$(BOARD)-$(SD_LOWER)
	include ../py/mkenv.mk
	include boards/$(BOARD)/mpconfigboard_$(SD_LOWER).mk

	include bluetooth/bluetooth_common.mk
endif

# qstr definitions (must come before including py.mk)
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h

FROZEN_MPY_DIR = freeze

# include py core make definitions
include ../py/py.mk


FATFS_DIR = lib/oofatfs
MPY_CROSS = ../mpy-cross/mpy-cross
MPY_TOOL = ../tools/mpy-tool.py

CROSS_COMPILE = arm-none-eabi-

MCU_VARIANT_UPPER = $(shell echo $(MCU_VARIANT) | tr '[:lower:]' '[:upper:]')

INC += -I.
INC += -I..
INC += -I$(BUILD)
INC += -I./device
INC += -I./../lib/cmsis/inc
INC += -I./device
INC += -I./device/$(MCU_VARIANT)
INC += -I./hal
INC += -I./hal/$(MCU_VARIANT)
INC += -I./modules/machine
INC += -I./modules/ubluepy
INC += -I../lib/mp-readline

NRF_DEFINES += -D$(MCU_VARIANT_UPPER)
NRF_DEFINES += -DCONFIG_GPIO_AS_PINRESET

CFLAGS_CORTEX_M = -mthumb -mabi=aapcs -fsingle-precision-constant -Wdouble-promotion

CFLAGS_MCU_m4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4 -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections

CFLAGS_MCU_m0 = $(CFLAGS_CORTEX_M) --short-enums -mtune=cortex-m0 -mcpu=cortex-m0 -mfloat-abi=soft -fno-builtin


CFLAGS += $(CFLAGS_MCU_$(MCU_SERIES)) 
CFLAGS += $(INC) -Wall -Werror -ansi -std=gnu99 -nostdlib $(COPT) $(NRF_DEFINES) $(CFLAGS_MOD)
CFLAGS += -fno-strict-aliasing
CFLAGS += -Iboards/$(BOARD)
CFLAGS += -DNRF5_HAL_H='<$(MCU_VARIANT)_hal.h>'

LDFLAGS = $(CFLAGS)
LDFLAGS += -Xlinker -Map=$(@:.elf=.map)
LDFLAGS += -mthumb -mabi=aapcs -T $(LD_FILE) -L boards/

#Debugging/Optimization
ifeq ($(DEBUG), 1)
#ASMFLAGS += -g -gtabs+
CFLAGS += -O0 -ggdb
LDFLAGS += -O0
else
CFLAGS += -Os -DNDEBUG
LDFLAGS += -Os
endif

LIBS += \

SRC_LIB = $(addprefix lib/,\
	libc/string0.c \
	mp-readline/readline.c \
	utils/pyexec.c \
	timeutils/timeutils.c \
	oofatfs/ff.c \
	oofatfs/option/unicode.c \
	netutils/netutils.c \
	)

SRC_HAL = $(addprefix hal/,\
	hal_uart.c \
	hal_uarte.c \
	hal_spi.c \
	hal_spie.c \
	hal_time.c \
	hal_rtc.c \
	hal_timer.c \
	hal_twi.c \
	hal_adc.c \
	hal_adce.c \
	hal_temp.c \
	hal_gpio.c \
	)

ifeq ($(MCU_VARIANT), nrf52)
SRC_HAL += $(addprefix hal/,\
	hal_pwm.c \
	)
endif

SRC_C += \
	main.c \
	mphalport.c \
	help.c \
	gccollect.c \
	pin_named_pins.c \
	fatfs_port.c \
	drivers/pwm.c \

DRIVERS_SRC_C += $(addprefix modules/,\
	machine/modmachine.c \
	machine/uart.c \
	machine/spi.c \
	machine/i2c.c \
	machine/adc.c \
	machine/pin.c \
	machine/timer.c \
	machine/rtc.c \
	machine/pwm.c \
	machine/led.c \
	machine/temp.c \
	uos/moduos.c \
	utime/modutime.c \
	pyb/modpyb.c \
	ubluepy/modubluepy.c \
	ubluepy/ubluepy_peripheral.c \
	ubluepy/ubluepy_service.c \
	ubluepy/ubluepy_characteristic.c \
	ubluepy/ubluepy_uuid.c \
	ubluepy/ubluepy_delegate.c \
	ubluepy/ubluepy_constants.c \
	ubluepy/ubluepy_descriptor.c \
	ubluepy/ubluepy_scanner.c \
	ubluepy/ubluepy_scan_entry.c \
	music/modmusic.c \
	music/musictunes.c \
	)

#ifeq ($(SD), )

SRC_C += \
	device/$(MCU_VARIANT)/system_$(MCU_SUB_VARIANT).c \

SRC_S = \
	device/$(MCU_VARIANT)/startup_$(MCU_VARIANT).s \

#endif

FROZEN_MPY_PY_FILES := $(shell find -L $(FROZEN_MPY_DIR) -type f -name '*.py')
FROZEN_MPY_MPY_FILES := $(addprefix $(BUILD)/,$(FROZEN_MPY_PY_FILES:.py=.mpy))

OBJ += $(PY_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o) $(SRC_S:.s=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_LIB:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_HAL:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(DRIVERS_SRC_C:.c=.o))
OBJ += $(BUILD)/pins_gen.o

$(BUILD)/$(FATFS_DIR)/ff.o: COPT += -Os
$(filter $(PY_BUILD)/../extmod/vfs_fat_%.o, $(PY_O)): COPT += -Os

.phony: all flash sd binary hex

all: binary hex

OUTPUT_FILENAME = firmware

## Create binary .bin file from the .out file
binary: $(BUILD)/$(OUTPUT_FILENAME).bin

$(BUILD)/$(OUTPUT_FILENAME).bin: $(BUILD)/$(OUTPUT_FILENAME).elf
	$(OBJCOPY) -O binary $< $@

## Create binary .hex file from the .out file
hex: $(BUILD)/$(OUTPUT_FILENAME).hex

$(BUILD)/$(OUTPUT_FILENAME).hex: $(BUILD)/$(OUTPUT_FILENAME).elf
	$(OBJCOPY) -O ihex $< $@

FLASHER ?=

ifeq ($(FLASHER),)

flash: $(BUILD)/$(OUTPUT_FILENAME).hex
	nrfjprog --program $< --sectorerase -f $(MCU_VARIANT)
	nrfjprog --reset -f $(MCU_VARIANT)

sd: $(BUILD)/$(OUTPUT_FILENAME).hex
	nrfjprog --eraseall -f $(MCU_VARIANT)
	nrfjprog --program $(SOFTDEV_HEX) -f $(MCU_VARIANT)
	nrfjprog --program $< --sectorerase -f $(MCU_VARIANT)
	nrfjprog --reset -f $(MCU_VARIANT)

else ifeq ($(FLASHER), pyocd)

flash: $(BUILD)/$(OUTPUT_FILENAME).hex
	pyocd-flashtool -t $(MCU_VARIANT) $<

sd: $(BUILD)/$(OUTPUT_FILENAME).hex
	pyocd-flashtool -t $(MCU_VARIANT) --chip_erase
	pyocd-flashtool -t $(MCU_VARIANT) $(SOFTDEV_HEX)
	pyocd-flashtool -t $(MCU_VARIANT) $<

endif

$(BUILD)/$(OUTPUT_FILENAME).elf: $(OBJ)
	$(ECHO) "LINK $@"
	$(Q)$(CC) $(LDFLAGS) -o $@ $(OBJ) $(LIBS)
	$(Q)$(SIZE) $@

# List of sources for qstr extraction
SRC_QSTR += $(SRC_C) $(SRC_MOD) $(SRC_LIB) $(DRIVERS_SRC_C)

# Append any auto-generated sources that are needed by sources listed in
# SRC_QSTR
SRC_QSTR_AUTO_DEPS +=

# Making OBJ use an order-only depenedency on the generated pins.h file
# has the side effect of making the pins.h file before we actually compile
# any of the objects. The normal dependency generation will deal with the
# case when pins.h is modified. But when it doesn't exist, we don't know
# which source files might need it.
$(OBJ): | $(HEADER_BUILD)/pins.h

# Use a pattern rule here so that make will only call make-pins.py once to make
# both pins_$(BOARD).c and pins.h
$(BUILD)/%_$(BOARD).c $(HEADER_BUILD)/%.h $(HEADER_BUILD)/%_af_const.h $(BUILD)/%_qstr.h: boards/$(BOARD)/%.csv $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
	$(ECHO) "Create $@"
	$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE) --prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) --qstr $(GEN_PINS_QSTR) --af-const $(GEN_PINS_AF_CONST) --af-py $(GEN_PINS_AF_PY) > $(GEN_PINS_SRC)

$(BUILD)/pins_gen.o: $(BUILD)/pins_gen.c
	$(call compile_c)

MAKE_PINS = boards/make-pins.py
BOARD_PINS = boards/$(BOARD)/pins.csv
AF_FILE = $(MCU_VARIANT)_af.csv
PREFIX_FILE = boards/$(MCU_VARIANT)_prefix.c
GEN_PINS_SRC = $(BUILD)/pins_gen.c
GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
GEN_PINS_AF_PY = $(BUILD)/pins_af.py

ifneq ($(FROZEN_DIR),)
# To use frozen source modules, put your .py files in a subdirectory (eg scripts/)
# and then invoke make with FROZEN_DIR=scripts (be sure to build from scratch).
CFLAGS += -DMICROPY_MODULE_FROZEN_STR
endif

ifneq ($(FROZEN_MPY_DIR),)
# To use frozen bytecode, put your .py files in a subdirectory (eg frozen/) and
# then invoke make with FROZEN_MPY_DIR=frozen (be sure to build from scratch).
CFLAGS += -DMICROPY_QSTR_EXTRA_POOL=mp_qstr_frozen_const_pool
CFLAGS += -DMICROPY_MODULE_FROZEN_MPY
endif

include ../py/mkrules.mk