circuitpython/ports/litex/mpconfigport.mk

# Internal math library is substantially smaller than toolchain one
INTERNAL_LIBM = 1

# Number of USB endpoint pairs.
USB_NUM_ENDPOINT_PAIRS = 16

# Longints can be implemented as mpz, as longlong, or not
LONGINT_IMPL = MPZ

CIRCUITPY_ANALOGIO = 0
CIRCUITPY_AUDIOBUSIO = 0
CIRCUITPY_AUDIOIO = 0
CIRCUITPY_BITBANGIO = 0
CIRCUITPY_BLEIO_HCI = 0
CIRCUITPY_BOARD = 0
CIRCUITPY_BUSDEVICE = 0
CIRCUITPY_BUSIO = 0
CIRCUITPY_COUNTIO = 0
CIRCUITPY_DISPLAYIO = 0
CIRCUITPY_FREQUENCYIO = 0
CIRCUITPY_I2CPERIPHERAL = 0
CIRCUITPY_NVM = 0
CIRCUITPY_PWMIO = 0
CIRCUITPY_PULSEIO = 0
CIRCUITPY_PWMIO = 0
CIRCUITPY_ROTARYIO = 0
CIRCUITPY_RTC = 0
CIRCUITPY_SDCARDIO = 0
# Enable USB support
CIRCUITPY_USB_HID = 1
CIRCUITPY_USB_MIDI = 1
ports: litex: add port and fomu board This adds support for Litex, along with support for the Fomu FPGA board. Signed-off-by: Sean Cross <sean@xobs.io> 2020-02-03 20:20:29 -05:00			`# Internal math library is substantially smaller than toolchain one`
			`INTERNAL_LIBM = 1`

usb descriptors all set; rework of enabling for USB devices 2021-02-04 19:23:40 -05:00			`# Number of USB endpoint pairs.`
count in/out endpoints; allow more usb modules on low-endpoint boards 2021-05-13 21:49:04 -04:00			`USB_NUM_ENDPOINT_PAIRS = 16`
usb descriptors all set; rework of enabling for USB devices 2021-02-04 19:23:40 -05:00
ports: litex: add port and fomu board This adds support for Litex, along with support for the Fomu FPGA board. Signed-off-by: Sean Cross <sean@xobs.io> 2020-02-03 20:20:29 -05:00			`# Longints can be implemented as mpz, as longlong, or not`
			`LONGINT_IMPL = MPZ`

litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`CIRCUITPY_ANALOGIO = 0`
			`CIRCUITPY_AUDIOBUSIO = 0`
			`CIRCUITPY_AUDIOIO = 0`
			`CIRCUITPY_BITBANGIO = 0`
no _bleio for litex; ESP32S2 defines BIT() already 2020-10-15 16:34:19 -04:00			`CIRCUITPY_BLEIO_HCI = 0`
litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`CIRCUITPY_BOARD = 0`
Removing from smaller builds 2020-11-11 11:24:33 -05:00			`CIRCUITPY_BUSDEVICE = 0`
litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`CIRCUITPY_BUSIO = 0`
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons. 2020-05-06 12:04:53 -04:00			`CIRCUITPY_COUNTIO = 0`
litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`CIRCUITPY_DISPLAYIO = 0`
			`CIRCUITPY_FREQUENCYIO = 0`
I2CPeripheral: Rename class and its module This is an incompatible change. 2020-06-23 09:45:15 -04:00			`CIRCUITPY_I2CPERIPHERAL = 0`
litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`CIRCUITPY_NVM = 0`
remove pwmio from litex port 2021-05-01 23:22:52 -04:00			`CIRCUITPY_PWMIO = 0`
litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`CIRCUITPY_PULSEIO = 0`
Fix broken builds 2021-05-01 13:49:18 -04:00			`CIRCUITPY_PWMIO = 0`
litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`CIRCUITPY_ROTARYIO = 0`
			`CIRCUITPY_RTC = 0`
sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons. 2020-05-06 12:04:53 -04:00			`CIRCUITPY_SDCARDIO = 0`
litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io> 2020-04-13 23:06:32 -04:00			`# Enable USB support`
ports: litex: add port and fomu board This adds support for Litex, along with support for the Fomu FPGA board. Signed-off-by: Sean Cross <sean@xobs.io> 2020-02-03 20:20:29 -05:00			`CIRCUITPY_USB_HID = 1`
			`CIRCUITPY_USB_MIDI = 1`