2023-04-11 08:29:43 -04:00
|
|
|
/*
|
|
|
|
*
|
|
|
|
* The MIT License (MIT)
|
|
|
|
*
|
|
|
|
* Copyright (c) 2023 CDarius
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
|
|
* in the Software without restriction, including without limitation the rights
|
|
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
|
|
* furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
|
|
* THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "supervisor/board.h"
|
|
|
|
#include "mpconfigboard.h"
|
|
|
|
#include "shared-bindings/busio/SPI.h"
|
|
|
|
#include "shared-bindings/busio/I2C.h"
|
|
|
|
#include "shared-bindings/displayio/FourWire.h"
|
|
|
|
#include "shared-bindings/microcontroller/Pin.h"
|
|
|
|
#include "shared-module/displayio/__init__.h"
|
|
|
|
#include "shared-module/displayio/mipi_constants.h"
|
|
|
|
#include "shared-bindings/board/__init__.h"
|
|
|
|
|
|
|
|
#include "shared-bindings/microcontroller/Pin.h"
|
|
|
|
#include "components/driver/include/driver/gpio.h"
|
|
|
|
#include "components/hal/include/hal/gpio_hal.h"
|
|
|
|
#include "common-hal/microcontroller/Pin.h"
|
|
|
|
|
2023-04-13 09:39:39 -04:00
|
|
|
#include "../../pmic/axp192/axp192.h"
|
2023-04-11 08:29:43 -04:00
|
|
|
|
|
|
|
displayio_fourwire_obj_t board_display_obj;
|
|
|
|
|
|
|
|
#define DELAY 0x80
|
|
|
|
#define PMIC_POWER_SOURCE_USB 0
|
|
|
|
#define PMIC_POWER_SOURCE_M_BUS 1
|
|
|
|
|
|
|
|
// display init sequence according to M5Gfx
|
|
|
|
uint8_t display_init_sequence[] = {
|
2023-08-14 00:47:22 -04:00
|
|
|
0x01, DELAY, 0x80, // Software reset then delay 0x80 (128ms)
|
|
|
|
0xC8, 0x03, 0xFF, 0x93, 0x42, // Turn on the external command
|
|
|
|
0xC0, 0x02, 0x12, 0x12, // Power Control 1
|
|
|
|
0xC1, 0x01, 0x03, // Power Control 2
|
|
|
|
0xC5, 0x01, 0xF2, // VCOM Control 1
|
|
|
|
0xB0, 0x01, 0xE0, // RGB Interface SYNC Mode
|
|
|
|
0xF6, 0x03, 0x01, 0x00, 0x00, // Interface control
|
|
|
|
0XE0, 0x0F, 0x00, 0x0C, 0x11, 0x04, 0x11, 0x08, 0x37, 0x89, 0x4C, 0x06, 0x0C, 0x0A, 0x2E, 0x34, 0x0F, // Positive Gamma Correction
|
|
|
|
0xE1, 0x0F, 0x00, 0x0B, 0x11, 0x05, 0x13, 0x09, 0x33, 0x67, 0x48, 0x07, 0x0E, 0x0B, 0x2E, 0x33, 0x0F, // Negative Gamma Correction
|
|
|
|
0xB6, 0x04, 0x08, 0x82, 0x1D, 0x04, // Display Function Control
|
|
|
|
0x3A, 0x01, 0x55, // COLMOD: Pixel Format Set 16 bit
|
|
|
|
0x21, 0x00, // Display inversion ON
|
|
|
|
0x36, 0x01, 0x08, // Memory Access Control: RGB order
|
|
|
|
0x11, DELAY, 0x78, // Exit Sleep then delay 0x78 (120ms)
|
|
|
|
0x29, DELAY, 0x78, // Display on then delay 0x78 (120ms)
|
2023-04-11 08:29:43 -04:00
|
|
|
};
|
|
|
|
|
2023-04-13 09:39:39 -04:00
|
|
|
static bool pmic_set_power_source(uint8_t source, busio_i2c_obj_t *i2c) {
|
2023-04-11 08:29:43 -04:00
|
|
|
int rc;
|
|
|
|
uint8_t read_buf[1];
|
|
|
|
uint8_t write_buf[2];
|
|
|
|
|
|
|
|
switch (source)
|
|
|
|
{
|
|
|
|
case PMIC_POWER_SOURCE_USB:
|
|
|
|
// Set GPIO to 3.3V (when LDO OUTPUT mode is active)
|
|
|
|
write_buf[0] = AXP192_GPIO0_LDO_VOLTAGE;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
write_buf[1] = (read_buf[0] & ~AXP192_GPIO0_LDO_VOLTAGE_MASK) | AXP192_GPIO0_LDO_VOLTAGE_3_3V;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
// Set GPIO0 to LDO_OUTPUT to set N_VBUSEN high
|
|
|
|
// When N_VBUSEN is high IPSOUT do not select VBUS as source (BUS_5V)
|
|
|
|
write_buf[0] = AXP192_GPIO0_FUNCTION;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
write_buf[1] = (read_buf[0] & ~AXP192_GPIO0_FUNCTION_MASK) | AXP192_GPIO0_FUNCTION_LDO_OUTPUT;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
#if M5STACK_CORE2_5V_OUTPUT_ENABLE_DEFAULT
|
|
|
|
// Set EXTENT output high to enable 5V power boost
|
2023-04-14 09:08:52 -04:00
|
|
|
write_buf[0] = AXP192_DCDC13_LDO23_CTRL;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
2023-04-14 09:08:52 -04:00
|
|
|
write_buf[1] = read_buf[0] | AXP192_DCDC13_LDO23_CTRL_EXTEN;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
// Enable VBUS-IPSOUT when N_VBUSEN is high
|
|
|
|
write_buf[0] = AXP192_VBUS_IPSOUT;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
write_buf[1] = read_buf[0] & ~AXP192_VBUS_IPSOUT_IGNORE_VBUSEN;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
|
|
|
|
case PMIC_POWER_SOURCE_M_BUS:
|
|
|
|
// Enable VBUS-IPSOUT regardless of f N_VBUSEN
|
|
|
|
write_buf[0] = AXP192_VBUS_IPSOUT;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
write_buf[1] = read_buf[0] | AXP192_VBUS_IPSOUT_IGNORE_VBUSEN;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Set EXTENT output low to disable 5V power boost
|
2023-04-14 09:08:52 -04:00
|
|
|
write_buf[0] = AXP192_DCDC13_LDO23_CTRL;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
2023-04-14 09:08:52 -04:00
|
|
|
write_buf[1] = read_buf[0] & ~AXP192_DCDC13_LDO23_CTRL_EXTEN;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Set GPIO0 to float and the pull down resistor set N_VBUSEN low
|
|
|
|
// When N_VBUSEN is low IPSOUT select VBUS as source (BUS_5V)
|
|
|
|
write_buf[0] = AXP192_GPIO0_FUNCTION;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
write_buf[1] = (read_buf[0] & ~AXP192_GPIO0_FUNCTION_MASK) | AXP192_GPIO0_FUNCTION_FLOATING;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-04-13 09:39:39 -04:00
|
|
|
static bool pmic_init(busio_i2c_obj_t *i2c) {
|
2023-04-11 08:29:43 -04:00
|
|
|
int rc;
|
2023-04-13 09:39:39 -04:00
|
|
|
uint8_t read_buf[1];
|
2023-04-11 08:29:43 -04:00
|
|
|
uint8_t write_buf[2];
|
|
|
|
|
2023-04-13 09:39:39 -04:00
|
|
|
if (!pmic_common_init(i2c)) {
|
2023-04-11 08:29:43 -04:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 30h
|
|
|
|
// The VBUS-IPSOUT path can be selected to be opened regardless of the status of N_VBUSEN
|
|
|
|
// VBUS VHOLD pressure limit control disabled
|
|
|
|
// VBUS current limit control enabled
|
|
|
|
write_buf[0] = AXP192_VBUS_IPSOUT;
|
|
|
|
write_buf[1] = AXP192_VBUS_IPSOUT_VBUS_LIMIT_CURRENT |
|
|
|
|
AXP192_VBUS_IPSOUT_VBUS_LIMIT_CURRENT_500mA;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 33h
|
|
|
|
// Charge function enable control bit, including internal and external channels
|
|
|
|
// Charging target voltage: 4.2V
|
|
|
|
// Charging end current: End charging when charging current is less than 10% setting
|
|
|
|
// Internal path charging current: 100mA
|
|
|
|
write_buf[0] = AXP192_CHARGING_CTRL1;
|
|
|
|
write_buf[1] = AXP192_CHARGING_CTRL1_ENABLE |
|
|
|
|
AXP192_CHARGING_CTRL1_VOLTAGE_4_20V |
|
|
|
|
AXP192_CHARGING_CTRL1_CHARGING_THRESH_10PERC |
|
|
|
|
AXP192_CHARGING_CTRL1_CURRENT_360mA;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 98h
|
|
|
|
// PWM1 frequency
|
|
|
|
write_buf[0] = AXP192_PWM1_OUTPUT_FREQUECY;
|
|
|
|
write_buf[1] = 0x00;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 99h
|
|
|
|
// PWM1 duty cycle Y1
|
|
|
|
write_buf[0] = AXP192_PWM1_DUTY_RATIO_Y1;
|
|
|
|
write_buf[1] = 0xFF;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 9Ah
|
|
|
|
// PWM1 duty cycle Y2
|
|
|
|
write_buf[0] = AXP192_PWM1_DUTY_RATIO_Y2;
|
|
|
|
write_buf[1] = 0xFF;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 93h
|
|
|
|
// Speaker off (GPIO2 output low)
|
|
|
|
write_buf[0] = AXP192_GPIO2_FUNCTION;
|
|
|
|
write_buf[1] = AXP192_GPIO2_FUNCTION_LOW_OUTPUT;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 28h
|
|
|
|
// LDO2 (SD + TFT Logic): 3.3V
|
|
|
|
// LDO3 (Vibration motore): Set to minimum voltage 1.8V
|
|
|
|
write_buf[0] = AXP192_LDO23_OUT_VOLTAGE;
|
|
|
|
write_buf[1] = AXP192_LDO23_OUT_VOLTAGE_LDO2_3_3V |
|
|
|
|
AXP192_LDO23_OUT_VOLTAGE_LDO3_1_8V;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 26h
|
|
|
|
// DCDC1 (ESP32 VDD): 3.350V
|
|
|
|
write_buf[0] = AXP192_DCDC1_OUT_VOLTAGE;
|
|
|
|
write_buf[1] = AXP192_DCDC1_OUT_VOLTAGE_3_350V;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 27h
|
|
|
|
// DCDC3 (TFT backlight): 3.0V
|
|
|
|
write_buf[0] = AXP192_DCDC3_OUT_VOLTAGE;
|
|
|
|
write_buf[1] = AXP192_DCDC3_OUT_VOLTAGE_3_0V;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 12h
|
|
|
|
// Enable:
|
|
|
|
// DCDC1 ESP32 VDD, touch screen and 3.3V on M-Bus
|
|
|
|
// DCDC3 LCD backlight
|
|
|
|
// LDO2 LCD logic and SD card
|
|
|
|
write_buf[0] = AXP192_DCDC13_LDO23_CTRL;
|
|
|
|
write_buf[1] = AXP192_DCDC13_LDO23_CTRL_LDO2 |
|
|
|
|
AXP192_DCDC13_LDO23_CTRL_DCDC3 |
|
|
|
|
AXP192_DCDC13_LDO23_CTRL_DCDC1;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Reg: 92h
|
|
|
|
// Set GPIO1 Sys green LED output as PWM
|
|
|
|
// PWM duty cycle is set to 100% therefore sys led is off
|
|
|
|
write_buf[0] = AXP192_GPIO1_FUNCTION;
|
|
|
|
write_buf[1] = AXP192_GPIO1_FUNCTION_PWM1_OUTPUT;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Select power source:
|
|
|
|
* If there is voltage on VBUS means that BUS_5V is powered from M-BUS
|
|
|
|
* and it can use VBUS as power source. If no voltage is present on VBUS
|
|
|
|
* disable VBUS and rely on ACIN (USB_5V) as power source.
|
|
|
|
*/
|
|
|
|
write_buf[0] = AXP192_INPUT_POWER_STATE;
|
2023-04-13 09:39:39 -04:00
|
|
|
rc = common_hal_busio_i2c_write_read(i2c, AXP192_I2C_ADDRESS, write_buf, 1, read_buf, sizeof(read_buf));
|
2023-04-11 08:29:43 -04:00
|
|
|
if (rc != 0) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
uint8_t powersource = (read_buf[0] & AXP192_INPUT_POWER_STATE_VBUS_AVAILABLE) ?
|
|
|
|
PMIC_POWER_SOURCE_M_BUS : PMIC_POWER_SOURCE_USB;
|
2023-04-13 09:39:39 -04:00
|
|
|
if (!pmic_set_power_source(powersource, i2c)) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!pmic_disable_all_irq(i2c)) {
|
2023-04-11 08:29:43 -04:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2023-04-13 09:39:39 -04:00
|
|
|
if (!pmic_clear_all_irq(i2c)) {
|
2023-04-11 08:29:43 -04:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2023-04-13 09:39:39 -04:00
|
|
|
if (!pmic_enable_power_key_press_irq(i2c)) {
|
2023-04-11 08:29:43 -04:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2023-04-13 09:39:39 -04:00
|
|
|
if (!pmic_enable_low_battery_irq(i2c)) {
|
2023-04-11 08:29:43 -04:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool display_init(void) {
|
|
|
|
busio_spi_obj_t *spi = common_hal_board_create_spi(0);
|
2023-04-21 16:23:01 -04:00
|
|
|
displayio_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
|
2023-04-11 08:29:43 -04:00
|
|
|
bus->base.type = &displayio_fourwire_type;
|
|
|
|
|
|
|
|
common_hal_displayio_fourwire_construct(
|
|
|
|
bus,
|
|
|
|
spi,
|
|
|
|
&pin_GPIO15, // DC
|
|
|
|
&pin_GPIO5, // CS
|
|
|
|
NULL, // RST
|
|
|
|
32000000, // baudrate
|
|
|
|
0, // polarity
|
|
|
|
0 // phase
|
|
|
|
);
|
|
|
|
|
2023-04-21 16:23:01 -04:00
|
|
|
displayio_display_obj_t *display = &allocate_display()->display;
|
2023-04-11 08:29:43 -04:00
|
|
|
display->base.type = &displayio_display_type;
|
|
|
|
|
|
|
|
common_hal_displayio_display_construct(
|
|
|
|
display,
|
|
|
|
bus,
|
|
|
|
320, // width (after rotation)
|
|
|
|
240, // height (after rotation)
|
|
|
|
0, // column start
|
|
|
|
0, // row start
|
|
|
|
0, // rotation
|
|
|
|
16, // color depth
|
|
|
|
false, // grayscale
|
|
|
|
false, // pixels in a byte share a row. Only valid for depths < 8
|
|
|
|
1, // bytes per cell. Only valid for depths < 8
|
|
|
|
false, // reverse_pixels_in_byte. Only valid for depths < 8
|
|
|
|
true, // reverse_pixels_in_word
|
|
|
|
MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
|
|
|
|
MIPI_COMMAND_SET_PAGE_ADDRESS, // set row command
|
|
|
|
MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
|
|
|
|
display_init_sequence,
|
|
|
|
sizeof(display_init_sequence),
|
|
|
|
NULL, // backlight pin
|
|
|
|
NO_BRIGHTNESS_COMMAND,
|
|
|
|
1.0f, // brightness
|
|
|
|
false, // single_byte_bounds
|
|
|
|
false, // data_as_commands
|
|
|
|
true, // auto_refresh
|
|
|
|
61, // native_frames_per_second
|
|
|
|
true, // backlight_on_high
|
|
|
|
false, // SH1107_addressing
|
|
|
|
50000 // backlight pwm frequency
|
|
|
|
);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
void board_init(void) {
|
|
|
|
busio_i2c_obj_t *internal_i2c = common_hal_board_create_i2c(0);
|
|
|
|
|
|
|
|
if (!pmic_init(internal_i2c)) {
|
|
|
|
mp_printf(&mp_plat_print, "could not initialize axp192 pmic\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!display_init()) {
|
|
|
|
mp_printf(&mp_plat_print, "could not initialize the display");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|