djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/ports/atmel-samd/boards/same54_xplained/mpconfigboard.mk

16 lines
306 B
Makefile
Raw Normal View History

atmel-samd: Add SAM E54 Xplained board Few peripherals are actually tested. However, USB, I2C and GPIO seem to work. Most pins are silkscreened with the "PX00" style, so the board module only includes the small number that are screened differently. The default SPI, I2C, and UART are the ones on the EXT2 header. This is arbitrary, but the I2C on this connector is shared with the on-board I2C devices and the PCC header, making it the most versatile.
2020-06-18 15:16:57 -04:00
USB_VID = 0x239A
USB_PID = 0x80B6
USB_PRODUCT = "SAM E54 Xplained Pro"
USB_MANUFACTURER = "Microchip"
CHIP_VARIANT = SAME54P20A
CHIP_FAMILY = same54
QSPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 2
EXTERNAL_FLASH_DEVICES = "N25Q256A"
LONGINT_IMPL = MPZ
atmel-samd: Add SDIO SD card interface
2020-06-26 11:58:54 -04:00
CIRCUITPY_SDIOIO = 1
_canio: Minimal implementation for SAM E5x MCUs Tested & working: * Send standard packets * Receive standard packets (1 FIFO, no filter) Interoperation between SAM E54 Xplained running this tree and MicroPython running on STM32F405 Feather with an external transceiver was also tested. Many other aspects of a full implementation are not yet present, such as error detection and recovery.
2020-08-20 12:08:00 -04:00
CIRCUITPY_CANIO = 1