djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c6bc9c48c9
circuitpython/ports/mimxrt10xx/boards/metro_m7_1011/pins.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

65 lines
3.0 KiB
C
Raw Normal View History

Unify iMX flash config and add Metro M7 1011 This unifies the flash config to the settings used by the Boot ROM. This makes the config unique per board which allows for changing quad enable and status bit differences per flash device. It also allows for timing differences due to the board layout. This change also tweaks linker layout to leave more ram space for the CircuitPython heap.
2020-09-28 22:21:17 -04:00
#include "shared-bindings/board/__init__.h"
Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786
2020-12-02 21:05:29 -05:00
#include "supervisor/board.h"
Unify iMX flash config and add Metro M7 1011 This unifies the flash config to the settings used by the Boot ROM. This makes the config unique per board which allows for changing quad enable and status bit differences per flash device. It also allows for timing differences due to the board layout. This change also tweaks linker layout to leave more ram space for the CircuitPython heap.
2020-09-28 22:21:17 -04:00
change board dicts to include a common macro with __name__
2021-09-03 09:16:33 -04:00
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
add board.ID
2021-08-13 18:51:09 -04:00
Unify iMX flash config and add Metro M7 1011 This unifies the flash config to the settings used by the Boot ROM. This makes the config unique per board which allows for changing quad enable and status bit differences per flash device. It also allows for timing differences due to the board layout. This change also tweaks linker layout to leave more ram space for the CircuitPython heap.
2020-09-28 22:21:17 -04:00
// Analog
{ MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO_AD_02) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO_AD_01) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO_AD_00) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO_AD_05) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO_AD_10) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO_AD_08) },
// Digital
{ MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO_09) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_09) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO_10) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_10) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO_13) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO_12) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO_SD_00) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO_SD_01) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO_SD_02) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO_11) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO_08) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO_07) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO_06) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO_05) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO_04) },
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED),MP_ROM_PTR(&pin_GPIO_03) },
Unify iMX flash config and add Metro M7 1011 This unifies the flash config to the settings used by the Boot ROM. This makes the config unique per board which allows for changing quad enable and status bit differences per flash device. It also allows for timing differences due to the board layout. This change also tweaks linker layout to leave more ram space for the CircuitPython heap.
2020-09-28 22:21:17 -04:00
{ MP_OBJ_NEW_QSTR(MP_QSTR_D13),MP_ROM_PTR(&pin_GPIO_03) },
// ESP control
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_CS), MP_ROM_PTR(&pin_GPIO_AD_14) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_GPIO_SD_05) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_GPIO_AD_11) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_GPIO_AD_07) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_GPIO_09) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_GPIO_10) },
// SPI
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO_AD_06) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO_AD_03) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO_AD_04) },
// I2C
{ MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO_01) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO_02) },
{ MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO_00) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
add board.STEMMA_I2C alias to some boards
2022-02-01 19:18:46 -05:00
{ MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
Unify iMX flash config and add Metro M7 1011 This unifies the flash config to the settings used by the Boot ROM. This makes the config unique per board which allows for changing quad enable and status bit differences per flash device. It also allows for timing differences due to the board layout. This change also tweaks linker layout to leave more ram space for the CircuitPython heap.
2020-09-28 22:21:17 -04:00
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
mimxrt10xx: implement i2sout tested on metro m7 (green prototype version) with max98357a i2s amplifier and the following test code: ```py import board import time import digitalio from audiobusio import I2SOut from audiocore import RawSample from microcontroller import pin from ulab import numpy as np n = np.array(np.sin(np.linspace(0, np.pi*2, 218, endpoint=False)) * 200, dtype=np.int16) print(n) r = RawSample(n, sample_rate=8000, channel_count=2) def main(): with digitalio.DigitalInOut(board.LED) as l: l.switch_to_output(True) value = False while True: with I2SOut(pin.GPIO_06, pin.GPIO_07, pin.GPIO_04) as i: time.sleep(.01) l.value = value = not value i.play(r, loop=True) print(i.playing) time.sleep(.5) i.stop() print("STOPPED") print(i.playing) time.sleep(.5) i.play(r, loop=True) print(i.playing) print("PLAY AGAIN") time.sleep(.5) time.sleep(1) ``` Only stereo, 16-bit, raw samples were tested; the sample rate is actually fixed at 48kHz in the core right now. There is more to do, but the basics work. # Conflicts: # ports/mimxrt10xx/Makefile # ports/mimxrt10xx/mpconfigport.mk
2023-03-22 13:14:00 -04:00
{ MP_ROM_QSTR(MP_QSTR_I2S_WSEL), MP_ROM_PTR(&pin_GPIO_06) }, // D10
{ MP_ROM_QSTR(MP_QSTR_I2S_BCLK), MP_ROM_PTR(&pin_GPIO_07) }, // D9
{ MP_ROM_QSTR(MP_QSTR_I2S_DOUT), MP_ROM_PTR(&pin_GPIO_04) }, // D12
Unify iMX flash config and add Metro M7 1011 This unifies the flash config to the settings used by the Boot ROM. This makes the config unique per board which allows for changing quad enable and status bit differences per flash device. It also allows for timing differences due to the board layout. This change also tweaks linker layout to leave more ram space for the CircuitPython heap.
2020-09-28 22:21:17 -04:00
};
change board dicts to include a common macro with __name__
2021-09-03 09:16:33 -04:00
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
Reference in New Issue Copy Permalink