circuitpython/ports/nrf/boards/espruino_banglejs2/mpconfigboard.h

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2016 Glenn Ruben Bakke
 * Copyright (c) 2018 Dan Halbert for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "nrfx/hal/nrf_gpio.h"

#define MICROPY_HW_BOARD_NAME       "Espruino Bangle.js 2"
#define MICROPY_HW_MCU_NAME         "nRF52840"

#define MICROPY_HW_LED_STATUS       (&pin_P0_19)

#if SPI_FLASH_FILESYSTEM
#define SPI_FLASH_MOSI_PIN &pin_P0_15
#define SPI_FLASH_MISO_PIN &pin_P0_13
#define SPI_FLASH_SCK_PIN &pin_P0_16
#define SPI_FLASH_CS_PIN &pin_P0_14
#endif

#define CIRCUITPY_BOOT_BUTTON (&pin_P0_17)

#define BOARD_HAS_32KHZ_XTAL (1)
Add Bangle.js 2, JDI memory displays and ACeP epd This 2-in-1 PR started with the goal of support the Bangle.js 2 smartwatch with no USB. * Adds "secure" DFU build support with a committed private key. * Adds 3-bit color support with one dummy bit for the JDI memory display * Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK. This is needed because the Bangle.js 2 uses the watchdog to reset. * Renamed port_background_task() to port_background_tick() to indicate it runs on tick, not RUN_BACKGROUND_TASK. * Marks serial connected when the display terminal is inited. This means that safe mode messages show up on the display. ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that support as well. * Adds 3-bit ACeP color support for 7-color e-paper displays. (Not watch related but similar due to color depth.) * Allows a refresh sequence instead of a single int command. The 7" ACeP display requires a data byte for refresh. * Adds optional delay after resetting the display. The ACeP displays need this. (Probably to load LUTs from flash.) * Adds a cleaning phase for ACeP displays before the real refresh. For both: * Add dither support to Palette. * Palette no longer converts colors when set. Instead, it caches converted colors at each index. * ColorConverter now caches the last converted color. It should make conversions faster for repeated colors (not dithering.) 2022-07-30 01:09:49 -04:00			`/*`
			`* This file is part of the MicroPython project, http://micropython.org/`
			`*`
			`* The MIT License (MIT)`
			`*`
			`* Copyright (c) 2016 Glenn Ruben Bakke`
			`* Copyright (c) 2018 Dan Halbert for Adafruit Industries`
			`*`
			`* Permission is hereby granted, free of charge, to any person obtaining a copy`
			`* of this software and associated documentation files (the "Software"), to deal`
			`* in the Software without restriction, including without limitation the rights`
			`* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell`
			`* copies of the Software, and to permit persons to whom the Software is`
			`* furnished to do so, subject to the following conditions:`
			`*`
			`* The above copyright notice and this permission notice shall be included in`
			`* all copies or substantial portions of the Software.`
			`*`
			`* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR`
			`* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,`
			`* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE`
			`* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER`
			`* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,`
			`* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN`
			`* THE SOFTWARE.`
			`*/`

			`#include "nrfx/hal/nrf_gpio.h"`

			`#define MICROPY_HW_BOARD_NAME "Espruino Bangle.js 2"`
			`#define MICROPY_HW_MCU_NAME "nRF52840"`

			`#define MICROPY_HW_LED_STATUS (&pin_P0_19)`

			`#if SPI_FLASH_FILESYSTEM`
			`#define SPI_FLASH_MOSI_PIN &pin_P0_15`
			`#define SPI_FLASH_MISO_PIN &pin_P0_13`
			`#define SPI_FLASH_SCK_PIN &pin_P0_16`
			`#define SPI_FLASH_CS_PIN &pin_P0_14`
			`#endif`

			`#define CIRCUITPY_BOOT_BUTTON (&pin_P0_17)`

			`#define BOARD_HAS_32KHZ_XTAL (1)`