circuitpython/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.mk

USB_VID = 0x239A
USB_PID = 0x80F4
USB_PRODUCT = "Pico"
USB_MANUFACTURER = "Raspberry Pi"

CHIP_VARIANT = RP2040
CHIP_FAMILY = rp2

INTERNAL_FLASH_FILESYSTEM = 1

CIRCUITPY__EVE = 1

BOOT2_S_UPPER = sdk/src/rp2_common/boot_stage2/boot2_w25q080.S
Add initial RP2040 support The RP2040 is new microcontroller from Raspberry Pi that features two Cortex M0s and eight PIO state machines that are good for crunching lots of data. It has 264k RAM and a built in UF2 bootloader too. Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf 2021-01-20 19:47:18 -05:00			`USB_VID = 0x239A`
			`USB_PID = 0x80F4`
			`USB_PRODUCT = "Pico"`
			`USB_MANUFACTURER = "Raspberry Pi"`

			`CHIP_VARIANT = RP2040`
			`CHIP_FAMILY = rp2`

			`INTERNAL_FLASH_FILESYSTEM = 1`
Add Gameduino 3X Dazzler support on raspberry_pi_pico Tested with hardware. Looks good. Follow on from #4054 2021-01-29 15:25:59 -05:00
			`CIRCUITPY__EVE = 1`
raspberry: switch pico back to the boot2 for W25Q16 Presumably, switching it to generic hurt performance a bit. I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S built file has the same checksum as the old bs2_default_padded_checksummed.S 2021-03-02 09:08:41 -05:00
			`BOOT2_S_UPPER = sdk/src/rp2_common/boot_stage2/boot2_w25q080.S`