circuitpython/py/gc.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1449 lines
50 KiB
C
Raw Normal View History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
* Copyright (c) 2014 Paul Sokolovsky
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <assert.h>
2013-10-21 18:45:08 -04:00
#include <stdio.h>
#include <string.h>
#include "py/gc.h"
#include "py/runtime.h"
2014-04-03 17:55:12 -04:00
#if MICROPY_DEBUG_VALGRIND
#include <valgrind/memcheck.h>
#endif
// CIRCUITPY-CHANGE
#include "supervisor/shared/safe_mode.h"
2020-07-15 20:58:38 -04:00
#if CIRCUITPY_MEMORYMONITOR
2020-07-16 22:01:43 -04:00
#include "shared-module/memorymonitor/__init__.h"
2020-07-15 20:58:38 -04:00
#endif
#if MICROPY_ENABLE_GC
#if MICROPY_DEBUG_VERBOSE // print debugging info
#define DEBUG_PRINT (1)
#define DEBUG_printf DEBUG_printf
#else // don't print debugging info
#define DEBUG_PRINT (0)
#define DEBUG_printf(...) (void)0
#endif
// CIRCUITPY-CHANGE
Introduce a long lived section of the heap. This adapts the allocation process to start from either end of the heap when searching for free space. The default behavior is identical to the existing behavior where it starts with the lowest block and looks higher. Now it can also look from the highest block and lower depending on the long_lived parameter to gc_alloc. As the heap fills, the two sections may overlap. When they overlap, a collect may be triggered in order to keep the long lived section compact. However, free space is always eligable for each type of allocation. By starting from either of the end of the heap we have ability to separate short lived objects from long lived ones. This separation reduces heap fragmentation because long lived objects are easy to densely pack. Most objects are short lived initially but may be made long lived when they are referenced by a type or module. This involves copying the memory and then letting the collect phase free the old portion. QSTR pools and chunks are always long lived because they are never freed. The reallocation, collection and free processes are largely unchanged. They simply also maintain an index to the highest free block as well as the lowest. These indices are used to speed up the allocation search until the next collect. In practice, this change may slightly slow down import statements with the benefit that memory is much less fragmented afterwards. For example, a test import into a 20k heap that leaves ~6k free previously had the largest continuous free space of ~400 bytes. After this change, the largest continuous free space is over 3400 bytes.
2018-01-23 19:22:05 -05:00
// Uncomment this if you want to use a debugger to capture state at every allocation and free.
// #define LOG_HEAP_ACTIVITY 1
// make this 1 to dump the heap each time it changes
#define EXTENSIVE_HEAP_PROFILING (0)
// make this 1 to zero out swept memory to more eagerly
// detect untraced object still in use
#define CLEAR_ON_SWEEP (0)
#define WORDS_PER_BLOCK ((MICROPY_BYTES_PER_GC_BLOCK) / MP_BYTES_PER_OBJ_WORD)
#define BYTES_PER_BLOCK (MICROPY_BYTES_PER_GC_BLOCK)
2013-10-21 18:45:08 -04:00
// ATB = allocation table byte
// 0b00 = FREE -- free block
// 0b01 = HEAD -- head of a chain of blocks
// 0b10 = TAIL -- in the tail of a chain of blocks
// 0b11 = MARK -- marked head block
#define AT_FREE (0)
#define AT_HEAD (1)
#define AT_TAIL (2)
#define AT_MARK (3)
#define BLOCKS_PER_ATB (4)
#define ATB_MASK_0 (0x03)
#define ATB_MASK_1 (0x0c)
#define ATB_MASK_2 (0x30)
#define ATB_MASK_3 (0xc0)
#define ATB_0_IS_FREE(a) (((a) & ATB_MASK_0) == 0)
#define ATB_1_IS_FREE(a) (((a) & ATB_MASK_1) == 0)
#define ATB_2_IS_FREE(a) (((a) & ATB_MASK_2) == 0)
#define ATB_3_IS_FREE(a) (((a) & ATB_MASK_3) == 0)
2013-10-21 18:45:08 -04:00
#if MICROPY_GC_SPLIT_HEAP
#define NEXT_AREA(area) ((area)->next)
#else
#define NEXT_AREA(area) (NULL)
#endif
2013-10-21 18:45:08 -04:00
#define BLOCK_SHIFT(block) (2 * ((block) & (BLOCKS_PER_ATB - 1)))
#define ATB_GET_KIND(area, block) (((area)->gc_alloc_table_start[(block) / BLOCKS_PER_ATB] >> BLOCK_SHIFT(block)) & 3)
#define ATB_ANY_TO_FREE(area, block) do { area->gc_alloc_table_start[(block) / BLOCKS_PER_ATB] &= (~(AT_MARK << BLOCK_SHIFT(block))); } while (0)
#define ATB_FREE_TO_HEAD(area, block) do { area->gc_alloc_table_start[(block) / BLOCKS_PER_ATB] |= (AT_HEAD << BLOCK_SHIFT(block)); } while (0)
#define ATB_FREE_TO_TAIL(area, block) do { area->gc_alloc_table_start[(block) / BLOCKS_PER_ATB] |= (AT_TAIL << BLOCK_SHIFT(block)); } while (0)
#define ATB_HEAD_TO_MARK(area, block) do { area->gc_alloc_table_start[(block) / BLOCKS_PER_ATB] |= (AT_MARK << BLOCK_SHIFT(block)); } while (0)
#define ATB_MARK_TO_HEAD(area, block) do { area->gc_alloc_table_start[(block) / BLOCKS_PER_ATB] &= (~(AT_TAIL << BLOCK_SHIFT(block))); } while (0)
#define BLOCK_FROM_PTR(area, ptr) (((byte *)(ptr) - area->gc_pool_start) / BYTES_PER_BLOCK)
#define PTR_FROM_BLOCK(area, block) (((block) * BYTES_PER_BLOCK + (uintptr_t)area->gc_pool_start))
2013-10-21 18:45:08 -04:00
// After the ATB, there must be a byte filled with AT_FREE so that gc_mark_tree
// cannot erroneously conclude that a block extends past the end of the GC heap
// due to bit patterns in the FTB (or first block, if finalizers are disabled)
// being interpreted as AT_TAIL.
#define ALLOC_TABLE_GAP_BYTE (1)
2013-10-21 18:45:08 -04:00
#if MICROPY_ENABLE_FINALISER
// FTB = finaliser table byte
// if set, then the corresponding block may have a finaliser
#define BLOCKS_PER_FTB (8)
#define FTB_GET(area, block) ((area->gc_finaliser_table_start[(block) / BLOCKS_PER_FTB] >> ((block) & 7)) & 1)
#define FTB_SET(area, block) do { area->gc_finaliser_table_start[(block) / BLOCKS_PER_FTB] |= (1 << ((block) & 7)); } while (0)
#define FTB_CLEAR(area, block) do { area->gc_finaliser_table_start[(block) / BLOCKS_PER_FTB] &= (~(1 << ((block) & 7))); } while (0)
#endif
#if MICROPY_PY_THREAD && !MICROPY_PY_THREAD_GIL
#define GC_ENTER() mp_thread_mutex_lock(&MP_STATE_MEM(gc_mutex), 1)
#define GC_EXIT() mp_thread_mutex_unlock(&MP_STATE_MEM(gc_mutex))
#else
#define GC_ENTER()
#define GC_EXIT()
#endif
// CIRCUITPY-CHANGE
#ifdef LOG_HEAP_ACTIVITY
volatile uint32_t change_me;
#pragma GCC push_options
#pragma GCC optimize ("O0")
void __attribute__ ((noinline)) gc_log_change(uint32_t start_block, uint32_t length) {
change_me += start_block;
change_me += length; // Break on this line.
}
#pragma GCC pop_options
#endif
// TODO waste less memory; currently requires that all entries in alloc_table have a corresponding block in pool
STATIC void gc_setup_area(mp_state_mem_area_t *area, void *start, void *end) {
// calculate parameters for GC (T=total, A=alloc table, F=finaliser table, P=pool; all in bytes):
// T = A + F + P
// F = A * BLOCKS_PER_ATB / BLOCKS_PER_FTB
// P = A * BLOCKS_PER_ATB * BYTES_PER_BLOCK
// => T = A * (1 + BLOCKS_PER_ATB / BLOCKS_PER_FTB + BLOCKS_PER_ATB * BYTES_PER_BLOCK)
size_t total_byte_len = (byte *)end - (byte *)start;
#if MICROPY_ENABLE_FINALISER
area->gc_alloc_table_byte_len = (total_byte_len - ALLOC_TABLE_GAP_BYTE)
* MP_BITS_PER_BYTE
/ (
MP_BITS_PER_BYTE
+ MP_BITS_PER_BYTE * BLOCKS_PER_ATB / BLOCKS_PER_FTB
+ MP_BITS_PER_BYTE * BLOCKS_PER_ATB * BYTES_PER_BLOCK
);
#else
area->gc_alloc_table_byte_len = (total_byte_len - ALLOC_TABLE_GAP_BYTE) / (1 + MP_BITS_PER_BYTE / 2 * BYTES_PER_BLOCK);
#endif
area->gc_alloc_table_start = (byte *)start;
2014-04-03 17:55:12 -04:00
#if MICROPY_ENABLE_FINALISER
size_t gc_finaliser_table_byte_len = (area->gc_alloc_table_byte_len * BLOCKS_PER_ATB + BLOCKS_PER_FTB - 1) / BLOCKS_PER_FTB;
area->gc_finaliser_table_start = area->gc_alloc_table_start + area->gc_alloc_table_byte_len + ALLOC_TABLE_GAP_BYTE;
#endif
2014-04-03 17:55:12 -04:00
size_t gc_pool_block_len = area->gc_alloc_table_byte_len * BLOCKS_PER_ATB;
area->gc_pool_start = (byte *)end - gc_pool_block_len * BYTES_PER_BLOCK;
area->gc_pool_end = end;
#if MICROPY_ENABLE_FINALISER
assert(area->gc_pool_start >= area->gc_finaliser_table_start + gc_finaliser_table_byte_len);
#endif
#if MICROPY_ENABLE_FINALISER
// clear ATB's and FTB's
memset(area->gc_alloc_table_start, 0, gc_finaliser_table_byte_len + area->gc_alloc_table_byte_len + ALLOC_TABLE_GAP_BYTE);
#else
// clear ATB's
memset(area->gc_alloc_table_start, 0, area->gc_alloc_table_byte_len + ALLOC_TABLE_GAP_BYTE);
#endif
2014-04-03 17:55:12 -04:00
area->gc_last_free_atb_index = 0;
area->gc_last_used_block = 0;
#if MICROPY_GC_SPLIT_HEAP
area->next = NULL;
#endif
2014-04-03 17:55:12 -04:00
DEBUG_printf("GC layout:\n");
DEBUG_printf(" alloc table at %p, length " UINT_FMT " bytes, "
UINT_FMT " blocks\n",
area->gc_alloc_table_start, area->gc_alloc_table_byte_len,
area->gc_alloc_table_byte_len * BLOCKS_PER_ATB);
#if MICROPY_ENABLE_FINALISER
DEBUG_printf(" finaliser table at %p, length " UINT_FMT " bytes, "
UINT_FMT " blocks\n", area->gc_finaliser_table_start,
gc_finaliser_table_byte_len,
gc_finaliser_table_byte_len * BLOCKS_PER_FTB);
#endif
DEBUG_printf(" pool at %p, length " UINT_FMT " bytes, "
UINT_FMT " blocks\n", area->gc_pool_start,
gc_pool_block_len * BYTES_PER_BLOCK, gc_pool_block_len);
}
void gc_init(void *start, void *end) {
// align end pointer on block boundary
end = (void *)((uintptr_t)end & (~(BYTES_PER_BLOCK - 1)));
DEBUG_printf("Initializing GC heap: %p..%p = " UINT_FMT " bytes\n", start, end, (byte *)end - (byte *)start);
gc_setup_area(&MP_STATE_MEM(area), start, end);
// set last free ATB index to start of heap
#if MICROPY_GC_SPLIT_HEAP
MP_STATE_MEM(gc_last_free_area) = &MP_STATE_MEM(area);
#endif
// unlock the GC
MP_STATE_THREAD(gc_lock_depth) = 0;
// allow auto collection
MP_STATE_MEM(gc_auto_collect_enabled) = 1;
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 17:37:30 -04:00
#if MICROPY_GC_ALLOC_THRESHOLD
// by default, maxuint for gc threshold, effectively turning gc-by-threshold off
MP_STATE_MEM(gc_alloc_threshold) = (size_t)-1;
MP_STATE_MEM(gc_alloc_amount) = 0;
#endif
#if MICROPY_PY_THREAD && !MICROPY_PY_THREAD_GIL
mp_thread_mutex_init(&MP_STATE_MEM(gc_mutex));
#endif
}
#if MICROPY_GC_SPLIT_HEAP
void gc_add(void *start, void *end) {
// Place the area struct at the start of the area.
mp_state_mem_area_t *area = (mp_state_mem_area_t *)start;
start = (void *)((uintptr_t)start + sizeof(mp_state_mem_area_t));
end = (void *)((uintptr_t)end & (~(BYTES_PER_BLOCK - 1)));
DEBUG_printf("Adding GC heap: %p..%p = " UINT_FMT " bytes\n", start, end, (byte *)end - (byte *)start);
// Init this area
gc_setup_area(area, start, end);
// Find the last registered area in the linked list
mp_state_mem_area_t *prev_area = &MP_STATE_MEM(area);
while (prev_area->next != NULL) {
prev_area = prev_area->next;
}
// Add this area to the linked list
prev_area->next = area;
}
#if MICROPY_GC_SPLIT_HEAP_AUTO
// Try to automatically add a heap area large enough to fulfill 'failed_alloc'.
STATIC bool gc_try_add_heap(size_t failed_alloc) {
// 'needed' is the size of a heap large enough to hold failed_alloc, with
// the additional metadata overheads as calculated in gc_setup_area().
//
// Rather than reproduce all of that logic here, we approximate that adding
// (13/512) is enough overhead for sufficiently large heap areas (the
// overhead converges to 3/128, but there's some fixed overhead and some
// rounding up of partial block sizes).
size_t needed = failed_alloc + MAX(2048, failed_alloc * 13 / 512);
size_t avail = gc_get_max_new_split();
DEBUG_printf("gc_try_add_heap failed_alloc " UINT_FMT ", "
"needed " UINT_FMT ", avail " UINT_FMT " bytes \n",
failed_alloc,
needed,
avail);
if (avail < needed) {
// Can't fit this allocation, or system heap has nearly run out anyway
return false;
}
// Deciding how much to grow the total heap by each time is tricky:
//
// - Grow by too small amounts, leads to heap fragmentation issues.
//
// - Grow by too large amounts, may lead to system heap running out of
// space.
//
// Currently, this implementation is:
//
// - At minimum, aim to double the total heap size each time we add a new
// heap. i.e. without any large single allocations, total size will be
// 64KB -> 128KB -> 256KB -> 512KB -> 1MB, etc
//
// - If the failed allocation is too large to fit in that size, the new
// heap is made exactly large enough for that allocation. Future growth
// will double the total heap size again.
//
// - If the new heap won't fit in the available free space, add the largest
// new heap that will fit (this may lead to failed system heap allocations
// elsewhere, but some allocation will likely fail in this circumstance!)
size_t total_heap = 0;
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area);
area != NULL;
area = NEXT_AREA(area)) {
total_heap += area->gc_pool_end - area->gc_alloc_table_start;
total_heap += ALLOC_TABLE_GAP_BYTE + sizeof(mp_state_mem_area_t);
}
DEBUG_printf("total_heap " UINT_FMT " bytes\n", total_heap);
size_t to_alloc = MIN(avail, MAX(total_heap, needed));
mp_state_mem_area_t *new_heap = MP_PLAT_ALLOC_HEAP(to_alloc);
DEBUG_printf("MP_PLAT_ALLOC_HEAP " UINT_FMT " = %p\n",
to_alloc, new_heap);
if (new_heap == NULL) {
// This should only fail:
// - In a threaded environment if another thread has
// allocated while this function ran.
// - If there is a bug in gc_get_max_new_split().
return false;
}
gc_add(new_heap, (void *)new_heap + to_alloc);
return true;
}
#endif
#endif
// CIRCUITPY-CHANGE
void gc_deinit(void) {
// Run any finalisers before we stop using the heap. This will also free
// any additional heap areas (but not the first.)
gc_sweep_all();
memset(&MP_STATE_MEM(area), 0, sizeof(MP_STATE_MEM(area)));
}
void gc_lock(void) {
// This does not need to be atomic or have the GC mutex because:
// - each thread has its own gc_lock_depth so there are no races between threads;
// - a hard interrupt will only change gc_lock_depth during its execution, and
// upon return will restore the value of gc_lock_depth.
MP_STATE_THREAD(gc_lock_depth)++;
}
void gc_unlock(void) {
// This does not need to be atomic, See comment above in gc_lock.
MP_STATE_THREAD(gc_lock_depth)--;
}
bool gc_is_locked(void) {
return MP_STATE_THREAD(gc_lock_depth) != 0;
}
2023-11-08 09:08:10 -05:00
// CIRCUITPY-CHANGE
bool gc_ptr_on_heap(void *ptr) {
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area); area != NULL; area = NEXT_AREA(area)) {
if (ptr >= (void *)area->gc_pool_start // must be above start of pool
&& ptr < (void *)area->gc_pool_end) { // must be below end of pool
return true;
}
}
return false;
}
#if MICROPY_GC_SPLIT_HEAP
// Returns the area to which this pointer belongs, or NULL if it isn't
// allocated on the GC-managed heap.
STATIC inline mp_state_mem_area_t *gc_get_ptr_area(const void *ptr) {
if (((uintptr_t)(ptr) & (BYTES_PER_BLOCK - 1)) != 0) { // must be aligned on a block
return NULL;
}
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area); area != NULL; area = NEXT_AREA(area)) {
if (ptr >= (void *)area->gc_pool_start // must be above start of pool
&& ptr < (void *)area->gc_pool_end) { // must be below end of pool
return area;
}
}
return NULL;
}
#endif
// ptr should be of type void*
#define VERIFY_PTR(ptr) ( \
((uintptr_t)(ptr) & (BYTES_PER_BLOCK - 1)) == 0 /* must be aligned on a block */ \
&& ptr >= (void *)MP_STATE_MEM(area).gc_pool_start /* must be above start of pool */ \
&& ptr < (void *)MP_STATE_MEM(area).gc_pool_end /* must be below end of pool */ \
)
#ifndef TRACE_MARK
#if DEBUG_PRINT
#define TRACE_MARK(block, ptr) DEBUG_printf("gc_mark(%p)\n", ptr)
#else
#define TRACE_MARK(block, ptr)
#endif
#endif
// Take the given block as the topmost block on the stack. Check all it's
// children: mark the unmarked child blocks and put those newly marked
// blocks on the stack. When all children have been checked, pop off the
// topmost block on the stack and repeat with that one.
// CIRCUITPY-CHANGE: We don't instrument these functions because they occur a lot during GC and
#if MICROPY_GC_SPLIT_HEAP
2023-09-20 12:19:57 -04:00
STATIC void MP_NO_INSTRUMENT PLACE_IN_ITCM(gc_mark_subtree)(mp_state_mem_area_t * area, size_t block)
#else
STATIC void MP_NO_INSTRUMENT PLACE_IN_ITCM(gc_mark_subtree)(size_t block)
#endif
{
// Start with the block passed in the argument.
size_t sp = 0;
for (;;) {
#if !MICROPY_GC_SPLIT_HEAP
mp_state_mem_area_t *area = &MP_STATE_MEM(area);
#endif
2013-10-22 10:25:25 -04:00
// work out number of consecutive blocks in the chain starting with this one
size_t n_blocks = 0;
2013-10-21 18:45:08 -04:00
do {
n_blocks += 1;
} while (ATB_GET_KIND(area, block + n_blocks) == AT_TAIL);
2013-10-21 18:45:08 -04:00
// check that the consecutive blocks didn't overflow past the end of the area
assert(area->gc_pool_start + (block + n_blocks) * BYTES_PER_BLOCK <= area->gc_pool_end);
2013-10-21 18:45:08 -04:00
// check this block's children
void **ptrs = (void **)PTR_FROM_BLOCK(area, block);
for (size_t i = n_blocks * BYTES_PER_BLOCK / sizeof(void *); i > 0; i--, ptrs++) {
MICROPY_GC_HOOK_LOOP(i);
void *ptr = *ptrs;
// If this is a heap pointer that hasn't been marked, mark it and push
// it's children to the stack.
#if MICROPY_GC_SPLIT_HEAP
mp_state_mem_area_t *ptr_area = gc_get_ptr_area(ptr);
if (!ptr_area) {
// Not a heap-allocated pointer (might even be random data).
continue;
}
#else
if (!VERIFY_PTR(ptr)) {
continue;
}
mp_state_mem_area_t *ptr_area = area;
#endif
size_t ptr_block = BLOCK_FROM_PTR(ptr_area, ptr);
if (ATB_GET_KIND(ptr_area, ptr_block) != AT_HEAD) {
// This block is already marked.
continue;
}
// An unmarked head. Mark it, and push it on gc stack.
TRACE_MARK(ptr_block, ptr);
ATB_HEAD_TO_MARK(ptr_area, ptr_block);
if (sp < MICROPY_ALLOC_GC_STACK_SIZE) {
MP_STATE_MEM(gc_block_stack)[sp] = ptr_block;
#if MICROPY_GC_SPLIT_HEAP
MP_STATE_MEM(gc_area_stack)[sp] = ptr_area;
#endif
sp += 1;
} else {
MP_STATE_MEM(gc_stack_overflow) = 1;
}
2013-10-21 18:45:08 -04:00
}
// Are there any blocks on the stack?
if (sp == 0) {
break; // No, stack is empty, we're done.
}
// pop the next block off the stack
sp -= 1;
block = MP_STATE_MEM(gc_block_stack)[sp];
#if MICROPY_GC_SPLIT_HEAP
area = MP_STATE_MEM(gc_area_stack)[sp];
#endif
2013-10-21 18:45:08 -04:00
}
}
STATIC void gc_deal_with_stack_overflow(void) {
while (MP_STATE_MEM(gc_stack_overflow)) {
MP_STATE_MEM(gc_stack_overflow) = 0;
2013-10-21 18:45:08 -04:00
// scan entire memory looking for blocks which have been marked but not their children
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area); area != NULL; area = NEXT_AREA(area)) {
for (size_t block = 0; block < area->gc_alloc_table_byte_len * BLOCKS_PER_ATB; block++) {
MICROPY_GC_HOOK_LOOP(block);
// trace (again) if mark bit set
if (ATB_GET_KIND(area, block) == AT_MARK) {
#if MICROPY_GC_SPLIT_HEAP
gc_mark_subtree(area, block);
#else
gc_mark_subtree(block);
#endif
}
2013-10-21 18:45:08 -04:00
}
}
}
}
STATIC void gc_sweep(void) {
#if MICROPY_PY_GC_COLLECT_RETVAL
MP_STATE_MEM(gc_collected) = 0;
#endif
2013-10-21 18:45:08 -04:00
// free unmarked heads and their tails
int free_tail = 0;
#if MICROPY_GC_SPLIT_HEAP_AUTO
mp_state_mem_area_t *prev_area = NULL;
#endif
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area); area != NULL; area = NEXT_AREA(area)) {
size_t end_block = area->gc_alloc_table_byte_len * BLOCKS_PER_ATB;
if (area->gc_last_used_block < end_block) {
end_block = area->gc_last_used_block + 1;
}
size_t last_used_block = 0;
for (size_t block = 0; block < end_block; block++) {
MICROPY_GC_HOOK_LOOP(block);
switch (ATB_GET_KIND(area, block)) {
case AT_HEAD:
#if MICROPY_ENABLE_FINALISER
if (FTB_GET(area, block)) {
mp_obj_base_t *obj = (mp_obj_base_t *)PTR_FROM_BLOCK(area, block);
if (obj->type != NULL) {
// if the object has a type then see if it has a __del__ method
mp_obj_t dest[2];
mp_load_method_maybe(MP_OBJ_FROM_PTR(obj), MP_QSTR___del__, dest);
if (dest[0] != MP_OBJ_NULL) {
// load_method returned a method, execute it in a protected environment
#if MICROPY_ENABLE_SCHEDULER
mp_sched_lock();
#endif
mp_call_function_1_protected(dest[0], dest[1]);
#if MICROPY_ENABLE_SCHEDULER
mp_sched_unlock();
#endif
}
}
// clear finaliser flag
FTB_CLEAR(area, block);
2014-04-03 17:55:12 -04:00
}
#endif
free_tail = 1;
DEBUG_printf("gc_sweep(%p)\n", (void *)PTR_FROM_BLOCK(area, block));
#if MICROPY_PY_GC_COLLECT_RETVAL
MP_STATE_MEM(gc_collected)++;
#endif
// fall through to free the head
MP_FALLTHROUGH
case AT_TAIL:
if (free_tail) {
ATB_ANY_TO_FREE(area, block);
#if CLEAR_ON_SWEEP
memset((void *)PTR_FROM_BLOCK(area, block), 0, BYTES_PER_BLOCK);
#endif
} else {
last_used_block = block;
}
break;
2013-10-21 18:45:08 -04:00
case AT_MARK:
ATB_MARK_TO_HEAD(area, block);
free_tail = 0;
last_used_block = block;
break;
}
}
area->gc_last_used_block = last_used_block;
#if MICROPY_GC_SPLIT_HEAP_AUTO
// Free any empty area, aside from the first one
if (last_used_block == 0 && prev_area != NULL) {
DEBUG_printf("gc_sweep free empty area %p\n", area);
NEXT_AREA(prev_area) = NEXT_AREA(area);
MP_PLAT_FREE_HEAP(area);
area = prev_area;
}
prev_area = area;
#endif
}
}
void gc_collect_start(void) {
GC_ENTER();
MP_STATE_THREAD(gc_lock_depth)++;
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 17:37:30 -04:00
#if MICROPY_GC_ALLOC_THRESHOLD
MP_STATE_MEM(gc_alloc_amount) = 0;
#endif
MP_STATE_MEM(gc_stack_overflow) = 0;
py: Introduce a Python stack for scoped allocation. This patch introduces the MICROPY_ENABLE_PYSTACK option (disabled by default) which enables a "Python stack" that allows to allocate and free memory in a scoped, or Last-In-First-Out (LIFO) way, similar to alloca(). A new memory allocation API is introduced along with this Py-stack. It includes both "local" and "nonlocal" LIFO allocation. Local allocation is intended to be equivalent to using alloca(), whereby the same function must free the memory. Nonlocal allocation is where another function may free the memory, so long as it's still LIFO. Follow-up patches will convert all uses of alloca() and VLA to the new scoped allocation API. The old behaviour (using alloca()) will still be available, but when MICROPY_ENABLE_PYSTACK is enabled then alloca() is no longer required or used. The benefits of enabling this option are (or will be once subsequent patches are made to convert alloca()/VLA): - Toolchains without alloca() can use this feature to obtain correct and efficient scoped memory allocation (compared to using the heap instead of alloca(), which is slower). - Even if alloca() is available, enabling the Py-stack gives slightly more efficient use of stack space when calling nested Python functions, due to the way that compilers implement alloca(). - Enabling the Py-stack with the stackless mode allows for even more efficient stack usage, as well as retaining high performance (because the heap is no longer used to build and destroy stackless code states). - With Py-stack and stackless enabled, Python-calling-Python is no longer recursive in the C mp_execute_bytecode function. The micropython.pystack_use() function is included to measure usage of the Python stack.
2017-11-26 07:28:40 -05:00
// Trace root pointers. This relies on the root pointers being organised
// correctly in the mp_state_ctx structure. We scan nlr_top, dict_locals,
// dict_globals, then the root pointer section of mp_state_vm.
void **ptrs = (void **)(void *)&mp_state_ctx;
size_t root_start = offsetof(mp_state_ctx_t, thread.dict_locals);
size_t root_end = offsetof(mp_state_ctx_t, vm.qstr_last_chunk);
gc_collect_root(ptrs + root_start / sizeof(void *), (root_end - root_start) / sizeof(void *));
py: Introduce a Python stack for scoped allocation. This patch introduces the MICROPY_ENABLE_PYSTACK option (disabled by default) which enables a "Python stack" that allows to allocate and free memory in a scoped, or Last-In-First-Out (LIFO) way, similar to alloca(). A new memory allocation API is introduced along with this Py-stack. It includes both "local" and "nonlocal" LIFO allocation. Local allocation is intended to be equivalent to using alloca(), whereby the same function must free the memory. Nonlocal allocation is where another function may free the memory, so long as it's still LIFO. Follow-up patches will convert all uses of alloca() and VLA to the new scoped allocation API. The old behaviour (using alloca()) will still be available, but when MICROPY_ENABLE_PYSTACK is enabled then alloca() is no longer required or used. The benefits of enabling this option are (or will be once subsequent patches are made to convert alloca()/VLA): - Toolchains without alloca() can use this feature to obtain correct and efficient scoped memory allocation (compared to using the heap instead of alloca(), which is slower). - Even if alloca() is available, enabling the Py-stack gives slightly more efficient use of stack space when calling nested Python functions, due to the way that compilers implement alloca(). - Enabling the Py-stack with the stackless mode allows for even more efficient stack usage, as well as retaining high performance (because the heap is no longer used to build and destroy stackless code states). - With Py-stack and stackless enabled, Python-calling-Python is no longer recursive in the C mp_execute_bytecode function. The micropython.pystack_use() function is included to measure usage of the Python stack.
2017-11-26 07:28:40 -05:00
#if MICROPY_ENABLE_PYSTACK
// Trace root pointers from the Python stack.
ptrs = (void **)(void *)MP_STATE_THREAD(pystack_start);
gc_collect_root(ptrs, (MP_STATE_THREAD(pystack_cur) - MP_STATE_THREAD(pystack_start)) / sizeof(void *));
#endif
2013-10-21 18:45:08 -04:00
}
// CIRCUITPY-CHANGE
void gc_collect_ptr(void *ptr) {
void *ptrs[1] = { ptr };
gc_collect_root(ptrs, 1);
}
// Address sanitizer needs to know that the access to ptrs[i] must always be
// considered OK, even if it's a load from an address that would normally be
// prohibited (due to being undefined, in a red zone, etc).
#if defined(__GNUC__) && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8))
__attribute__((no_sanitize_address))
#endif
// CIRCUITPY-CHANGE
static void *MP_NO_INSTRUMENT PLACE_IN_ITCM(gc_get_ptr)(void **ptrs, int i) {
#if MICROPY_DEBUG_VALGRIND
if (!VALGRIND_CHECK_MEM_IS_ADDRESSABLE(&ptrs[i], sizeof(*ptrs))) {
return NULL;
}
#endif
return ptrs[i];
}
void gc_collect_root(void **ptrs, size_t len) {
#if !MICROPY_GC_SPLIT_HEAP
mp_state_mem_area_t *area = &MP_STATE_MEM(area);
#endif
for (size_t i = 0; i < len; i++) {
MICROPY_GC_HOOK_LOOP(i);
void *ptr = gc_get_ptr(ptrs, i);
#if MICROPY_GC_SPLIT_HEAP
mp_state_mem_area_t *area = gc_get_ptr_area(ptr);
if (!area) {
continue;
}
#else
if (!VERIFY_PTR(ptr)) {
continue;
}
#endif
size_t block = BLOCK_FROM_PTR(area, ptr);
if (ATB_GET_KIND(area, block) == AT_HEAD) {
// An unmarked head: mark it, and mark all its children
ATB_HEAD_TO_MARK(area, block);
#if MICROPY_GC_SPLIT_HEAP
gc_mark_subtree(area, block);
#else
gc_mark_subtree(block);
#endif
}
2013-10-21 18:45:08 -04:00
}
}
void gc_collect_end(void) {
2013-10-21 18:45:08 -04:00
gc_deal_with_stack_overflow();
gc_sweep();
#if MICROPY_GC_SPLIT_HEAP
MP_STATE_MEM(gc_last_free_area) = &MP_STATE_MEM(area);
#endif
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area); area != NULL; area = NEXT_AREA(area)) {
area->gc_last_free_atb_index = 0;
}
MP_STATE_THREAD(gc_lock_depth)--;
GC_EXIT();
2013-10-22 10:25:25 -04:00
}
2013-10-21 18:45:08 -04:00
void gc_sweep_all(void) {
GC_ENTER();
MP_STATE_THREAD(gc_lock_depth)++;
MP_STATE_MEM(gc_stack_overflow) = 0;
gc_collect_end();
}
2013-10-22 10:25:25 -04:00
void gc_info(gc_info_t *info) {
GC_ENTER();
info->total = 0;
2013-10-22 10:25:25 -04:00
info->used = 0;
info->free = 0;
info->max_free = 0;
2013-10-22 10:25:25 -04:00
info->num_1block = 0;
info->num_2block = 0;
info->max_block = 0;
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area); area != NULL; area = NEXT_AREA(area)) {
bool finish = false;
info->total += area->gc_pool_end - area->gc_pool_start;
for (size_t block = 0, len = 0, len_free = 0; !finish;) {
MICROPY_GC_HOOK_LOOP(block);
size_t kind = ATB_GET_KIND(area, block);
switch (kind) {
case AT_FREE:
info->free += 1;
len_free += 1;
len = 0;
break;
case AT_HEAD:
info->used += 1;
len = 1;
break;
case AT_TAIL:
info->used += 1;
len += 1;
break;
case AT_MARK:
// shouldn't happen
break;
}
block++;
finish = (block == area->gc_alloc_table_byte_len * BLOCKS_PER_ATB);
// Get next block type if possible
if (!finish) {
kind = ATB_GET_KIND(area, block);
}
if (finish || kind == AT_FREE || kind == AT_HEAD) {
if (len == 1) {
info->num_1block += 1;
} else if (len == 2) {
info->num_2block += 1;
}
if (len > info->max_block) {
info->max_block = len;
}
if (finish || kind == AT_HEAD) {
if (len_free > info->max_free) {
info->max_free = len_free;
}
len_free = 0;
}
}
}
2013-10-21 18:45:08 -04:00
}
2013-10-22 10:25:25 -04:00
info->used *= BYTES_PER_BLOCK;
info->free *= BYTES_PER_BLOCK;
#if MICROPY_GC_SPLIT_HEAP_AUTO
info->max_new_split = gc_get_max_new_split();
#endif
GC_EXIT();
2013-10-21 18:45:08 -04:00
}
// CIRCUITPY-CHANGE
bool gc_alloc_possible(void) {
2023-09-20 12:19:57 -04:00
#if MICROPY_GC_SPLIT_HEAP
return MP_STATE_MEM(gc_last_free_area) != 0;
#else
return MP_STATE_MEM(area).gc_pool_start != 0;
#endif
}
void *gc_alloc(size_t n_bytes, unsigned int alloc_flags) {
bool has_finaliser = alloc_flags & GC_ALLOC_FLAG_HAS_FINALISER;
size_t n_blocks = ((n_bytes + BYTES_PER_BLOCK - 1) & (~(BYTES_PER_BLOCK - 1))) / BYTES_PER_BLOCK;
DEBUG_printf("gc_alloc(" UINT_FMT " bytes -> " UINT_FMT " blocks)\n", n_bytes, n_blocks);
2013-10-21 18:45:08 -04:00
// check for 0 allocation
if (n_blocks == 0) {
return NULL;
}
// check if GC is locked
if (MP_STATE_THREAD(gc_lock_depth) > 0) {
2013-10-21 18:45:08 -04:00
return NULL;
}
GC_ENTER();
mp_state_mem_area_t *area;
size_t i;
size_t end_block;
size_t start_block;
py/gc: In gc_alloc, reset n_free var right before search for free mem. Otherwise there is the possibility that n_free starts out non-zero from the previous iteration, which may have found a few (but not enough) free blocks at the end of the heap. If this is the case, and if the very first blocks that are scanned the second time around (starting at gc_last_free_atb_index) are found to give enough memory (including the blocks at the end of the heap from the previous iteration that left n_free non-zero) then memory will be allocated starting before the location that gc_last_free_atb_index points to, most likely leading to corruption. This serious bug did not manifest itself in the past because a gc_collect always resets gc_last_free_atb_index to point to the start of the GC heap, and the first block there is almost always allocated to a long-lived object (eg entries from sys.path, or mounted filesystem objects), which means that n_free would be reset at the start of the search loop. But with threading enabled with the GIL disabled it is possible to trigger the bug via the following sequence of events: 1. Thread A runs gc_alloc, fails to find enough memory, and has a non-zero n_free at the end of the search. 2. Thread A calls gc_collect and frees a bunch of blocks on the GC heap. 3. Just after gc_collect finishes in thread A, thread B takes gc_mutex and does an allocation, moving gc_last_free_atb_index to point to the interior of the heap, to a place where there is most likely a run of available blocks. 4. Thread A regains gc_mutex and does its second search for free memory, starting with a non-zero n_free. Since it's likely that the first block it searches is available it will allocate memory which overlaps with the memory before gc_last_free_atb_index.
2018-08-10 01:46:45 -04:00
size_t n_free;
int collected = !MP_STATE_MEM(gc_auto_collect_enabled);
#if MICROPY_GC_SPLIT_HEAP_AUTO
bool added = false;
#endif
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 17:37:30 -04:00
#if MICROPY_GC_ALLOC_THRESHOLD
if (!collected && MP_STATE_MEM(gc_alloc_amount) >= MP_STATE_MEM(gc_alloc_threshold)) {
GC_EXIT();
gc_collect();
collected = 1;
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 17:37:30 -04:00
GC_ENTER();
}
#endif
for (;;) {
#if MICROPY_GC_SPLIT_HEAP
area = MP_STATE_MEM(gc_last_free_area);
#else
area = &MP_STATE_MEM(area);
#endif
// CIRCUITPY-CHANGE
if (area == 0) {
reset_into_safe_mode(SAFE_MODE_GC_ALLOC_OUTSIDE_VM);
}
2013-10-21 18:45:08 -04:00
// look for a run of n_blocks available blocks
for (; area != NULL; area = NEXT_AREA(area), i = 0) {
n_free = 0;
for (i = area->gc_last_free_atb_index; i < area->gc_alloc_table_byte_len; i++) {
MICROPY_GC_HOOK_LOOP(i);
byte a = area->gc_alloc_table_start[i];
// *FORMAT-OFF*
if (ATB_0_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 0; goto found; } } else { n_free = 0; }
if (ATB_1_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 1; goto found; } } else { n_free = 0; }
if (ATB_2_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 2; goto found; } } else { n_free = 0; }
if (ATB_3_IS_FREE(a)) { if (++n_free >= n_blocks) { i = i * BLOCKS_PER_ATB + 3; goto found; } } else { n_free = 0; }
// *FORMAT-ON*
}
// No free blocks found on this heap. Mark this heap as
// filled, so we won't try to find free space here again until
// space is freed.
#if MICROPY_GC_SPLIT_HEAP
if (n_blocks == 1) {
area->gc_last_free_atb_index = (i + 1) / BLOCKS_PER_ATB; // or (size_t)-1
}
#endif
}
2013-10-21 18:45:08 -04:00
GC_EXIT();
2013-10-21 18:45:08 -04:00
// nothing found!
if (collected) {
#if MICROPY_GC_SPLIT_HEAP_AUTO
if (!added && gc_try_add_heap(n_bytes)) {
added = true;
continue;
}
#endif
#if CIRCUITPY_DEBUG
gc_dump_alloc_table(&mp_plat_print);
#endif
2013-10-21 18:45:08 -04:00
return NULL;
}
2014-02-11 11:01:38 -05:00
DEBUG_printf("gc_alloc(" UINT_FMT "): no free mem, triggering GC\n", n_bytes);
2013-10-21 18:45:08 -04:00
gc_collect();
collected = 1;
GC_ENTER();
2013-10-21 18:45:08 -04:00
}
// found, ending at block i inclusive
found:
// get starting and end blocks, both inclusive
end_block = i;
start_block = i - n_free + 1;
// Set last free ATB index to block after last block we found, for start of
// next scan. To reduce fragmentation, we only do this if we were looking
// for a single free block, which guarantees that there are no free blocks
// before this one. Also, whenever we free or shink a block we must check
// if this index needs adjusting (see gc_realloc and gc_free).
if (n_free == 1) {
#if MICROPY_GC_SPLIT_HEAP
MP_STATE_MEM(gc_last_free_area) = area;
#endif
area->gc_last_free_atb_index = (i + 1) / BLOCKS_PER_ATB;
}
// CIRCUITPY-CHANGE
#ifdef LOG_HEAP_ACTIVITY
gc_log_change(start_block, end_block - start_block + 1);
#endif
area->gc_last_used_block = MAX(area->gc_last_used_block, end_block);
2013-10-21 18:45:08 -04:00
// mark first block as used head
ATB_FREE_TO_HEAD(area, start_block);
2013-10-21 18:45:08 -04:00
// mark rest of blocks as used tail
// TODO for a run of many blocks can make this more efficient
for (size_t bl = start_block + 1; bl <= end_block; bl++) {
ATB_FREE_TO_TAIL(area, bl);
2013-10-21 18:45:08 -04:00
}
// get pointer to first block
// we must create this pointer before unlocking the GC so a collection can find it
void *ret_ptr = (void *)(area->gc_pool_start + start_block * BYTES_PER_BLOCK);
DEBUG_printf("gc_alloc(%p)\n", ret_ptr);
py/gc: Implement GC running by allocation threshold. Currently, MicroPython runs GC when it could not allocate a block of memory, which happens when heap is exhausted. However, that policy can't work well with "inifinity" heaps, e.g. backed by a virtual memory - there will be a lot of swap thrashing long before VM will be exhausted. Instead, in such cases "allocation threshold" policy is used: a GC is run after some number of allocations have been made. Details vary, for example, number or total amount of allocations can be used, threshold may be self-adjusting based on GC outcome, etc. This change implements a simple variant of such policy for MicroPython. Amount of allocated memory so far is used for threshold, to make it useful to typical finite-size, and small, heaps as used with MicroPython ports. And such GC policy is indeed useful for such types of heaps too, as it allows to better control fragmentation. For example, if a threshold is set to half size of heap, then for an application which usually makes big number of small allocations, that will (try to) keep half of heap memory in a nice defragmented state for an occasional large allocation. For an application which doesn't exhibit such behavior, there won't be any visible effects, except for GC running more frequently, which however may affect performance. To address this, the GC threshold is configurable, and by default is off so far. It's configured with gc.threshold(amount_in_bytes) call (can be queries without an argument).
2016-07-20 17:37:30 -04:00
#if MICROPY_GC_ALLOC_THRESHOLD
MP_STATE_MEM(gc_alloc_amount) += n_blocks;
#endif
GC_EXIT();
#if MICROPY_GC_CONSERVATIVE_CLEAR
// be conservative and zero out all the newly allocated blocks
memset((byte *)ret_ptr, 0, (end_block - start_block + 1) * BYTES_PER_BLOCK);
#else
// zero out the additional bytes of the newly allocated blocks
// This is needed because the blocks may have previously held pointers
// to the heap and will not be set to something else if the caller
// doesn't actually use the entire block. As such they will continue
// to point to the heap and may prevent other blocks from being reclaimed.
memset((byte *)ret_ptr + n_bytes, 0, (end_block - start_block + 1) * BYTES_PER_BLOCK - n_bytes);
#endif
#if MICROPY_ENABLE_FINALISER
if (has_finaliser) {
// clear type pointer in case it is never set
((mp_obj_base_t *)ret_ptr)->type = NULL;
// set mp_obj flag only if it has a finaliser
GC_ENTER();
FTB_SET(area, start_block);
GC_EXIT();
2014-04-05 09:49:03 -04:00
}
#else
(void)has_finaliser;
#endif
2014-04-05 09:49:03 -04:00
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table(&mp_plat_print);
2023-09-20 12:20:29 -04:00
#endif
2020-07-15 20:58:38 -04:00
#if CIRCUITPY_MEMORYMONITOR
2020-07-16 22:01:43 -04:00
memorymonitor_track_allocation(end_block - start_block + 1);
2023-09-20 12:19:57 -04:00
#endif
2020-07-15 20:58:38 -04:00
return ret_ptr;
2013-10-21 18:45:08 -04:00
}
/*
void *gc_alloc(mp_uint_t n_bytes) {
2014-04-03 17:55:12 -04:00
return _gc_alloc(n_bytes, false);
}
void *gc_alloc_with_finaliser(mp_uint_t n_bytes) {
2014-04-03 17:55:12 -04:00
return _gc_alloc(n_bytes, true);
}
*/
2014-04-03 17:55:12 -04:00
// force the freeing of a piece of memory
// TODO: freeing here does not call finaliser
void gc_free(void *ptr) {
if (MP_STATE_THREAD(gc_lock_depth) > 0) {
// Cannot free while the GC is locked. However free is an optimisation
// to reclaim the memory immediately, this means it will now be left
// until the next collection.
return;
}
GC_ENTER();
DEBUG_printf("gc_free(%p)\n", ptr);
if (ptr == NULL) {
// free(NULL) is a no-op
GC_EXIT();
return;
}
// get the GC block number corresponding to this pointer
mp_state_mem_area_t *area;
#if MICROPY_GC_SPLIT_HEAP
area = gc_get_ptr_area(ptr);
2023-10-20 16:51:04 -04:00
// assert(area);
#else
// CIRCUITPY-CHANGE: extra checking
if (MP_STATE_MEM(area).gc_pool_start == 0) {
reset_into_safe_mode(SAFE_MODE_GC_ALLOC_OUTSIDE_VM);
}
assert(VERIFY_PTR(ptr));
area = &MP_STATE_MEM(area);
#endif
size_t block = BLOCK_FROM_PTR(area, ptr);
assert(ATB_GET_KIND(area, block) == AT_HEAD);
#if MICROPY_ENABLE_FINALISER
FTB_CLEAR(area, block);
#endif
#if MICROPY_GC_SPLIT_HEAP
if (MP_STATE_MEM(gc_last_free_area) != area) {
// We freed something but it isn't the current area. Reset the
// last free area to the start for a rescan. Note that this won't
// give much of a performance hit, since areas that are completely
// filled will likely be skipped (the gc_last_free_atb_index
// points to the last block).
// The reason why this is necessary is because it is not possible
// to see which area came first (like it is possible to adjust
// gc_last_free_atb_index based on whether the freed block is
// before the last free block).
MP_STATE_MEM(gc_last_free_area) = &MP_STATE_MEM(area);
}
#endif
// set the last_free pointer to this block if it's earlier in the heap
if (block / BLOCKS_PER_ATB < area->gc_last_free_atb_index) {
area->gc_last_free_atb_index = block / BLOCKS_PER_ATB;
}
// CIRCUITPY-CHANGE
#ifdef LOG_HEAP_ACTIVITY
gc_log_change(start_block, 0);
#endif
// free head and all of its tail blocks
do {
ATB_ANY_TO_FREE(area, block);
block += 1;
} while (ATB_GET_KIND(area, block) == AT_TAIL);
GC_EXIT();
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table(&mp_plat_print);
#endif
}
size_t gc_nbytes(const void *ptr) {
GC_ENTER();
mp_state_mem_area_t *area;
#if MICROPY_GC_SPLIT_HEAP
area = gc_get_ptr_area(ptr);
#else
if (VERIFY_PTR(ptr)) {
area = &MP_STATE_MEM(area);
} else {
area = NULL;
}
#endif
if (area) {
size_t block = BLOCK_FROM_PTR(area, ptr);
if (ATB_GET_KIND(area, block) == AT_HEAD) {
2013-10-21 18:45:08 -04:00
// work out number of consecutive blocks in the chain starting with this on
size_t n_blocks = 0;
2013-10-21 18:45:08 -04:00
do {
n_blocks += 1;
} while (ATB_GET_KIND(area, block + n_blocks) == AT_TAIL);
GC_EXIT();
2013-10-21 18:45:08 -04:00
return n_blocks * BYTES_PER_BLOCK;
}
}
// invalid pointer
GC_EXIT();
2013-10-21 18:45:08 -04:00
return 0;
}
2014-03-12 15:00:23 -04:00
#if 0
// old, simple realloc that didn't expand memory in place
void *gc_realloc(void *ptr, mp_uint_t n_bytes) {
mp_uint_t n_existing = gc_nbytes(ptr);
2014-03-06 19:21:51 -05:00
if (n_bytes <= n_existing) {
return ptr;
} else {
bool has_finaliser;
if (ptr == NULL) {
has_finaliser = false;
} else {
#if MICROPY_ENABLE_FINALISER
has_finaliser = FTB_GET(BLOCK_FROM_PTR((mp_uint_t)ptr));
#else
has_finaliser = false;
#endif
}
void *ptr2 = gc_alloc(n_bytes, has_finaliser);
2014-03-06 19:21:51 -05:00
if (ptr2 == NULL) {
return ptr2;
}
memcpy(ptr2, ptr, n_existing);
gc_free(ptr);
return ptr2;
}
}
#else // Alternative gc_realloc impl
void *gc_realloc(void *ptr_in, size_t n_bytes, bool allow_move) {
// check for pure allocation
if (ptr_in == NULL) {
return gc_alloc(n_bytes, false);
}
// check for pure free
if (n_bytes == 0) {
gc_free(ptr_in);
return NULL;
}
if (MP_STATE_THREAD(gc_lock_depth) > 0) {
return NULL;
}
void *ptr = ptr_in;
GC_ENTER();
// get the GC block number corresponding to this pointer
mp_state_mem_area_t *area;
#if MICROPY_GC_SPLIT_HEAP
area = gc_get_ptr_area(ptr);
assert(area);
#else
assert(VERIFY_PTR(ptr));
area = &MP_STATE_MEM(area);
#endif
size_t block = BLOCK_FROM_PTR(area, ptr);
assert(ATB_GET_KIND(area, block) == AT_HEAD);
// compute number of new blocks that are requested
size_t new_blocks = (n_bytes + BYTES_PER_BLOCK - 1) / BYTES_PER_BLOCK;
// Get the total number of consecutive blocks that are already allocated to
// this chunk of memory, and then count the number of free blocks following
// it. Stop if we reach the end of the heap, or if we find enough extra
// free blocks to satisfy the realloc. Note that we need to compute the
// total size of the existing memory chunk so we can correctly and
// efficiently shrink it (see below for shrinking code).
size_t n_free = 0;
size_t n_blocks = 1; // counting HEAD block
size_t max_block = area->gc_alloc_table_byte_len * BLOCKS_PER_ATB;
for (size_t bl = block + n_blocks; bl < max_block; bl++) {
byte block_type = ATB_GET_KIND(area, bl);
if (block_type == AT_TAIL) {
n_blocks++;
continue;
2014-03-12 15:00:23 -04:00
}
if (block_type == AT_FREE) {
n_free++;
if (n_blocks + n_free >= new_blocks) {
// stop as soon as we find enough blocks for n_bytes
break;
}
continue;
}
break;
}
// return original ptr if it already has the requested number of blocks
if (new_blocks == n_blocks) {
GC_EXIT();
return ptr_in;
}
// check if we can shrink the allocated area
if (new_blocks < n_blocks) {
// free unneeded tail blocks
for (size_t bl = block + new_blocks, count = n_blocks - new_blocks; count > 0; bl++, count--) {
ATB_ANY_TO_FREE(area, bl);
}
#if MICROPY_GC_SPLIT_HEAP
if (MP_STATE_MEM(gc_last_free_area) != area) {
// See comment in gc_free.
MP_STATE_MEM(gc_last_free_area) = &MP_STATE_MEM(area);
}
#endif
// set the last_free pointer to end of this block if it's earlier in the heap
if ((block + new_blocks) / BLOCKS_PER_ATB < area->gc_last_free_atb_index) {
area->gc_last_free_atb_index = (block + new_blocks) / BLOCKS_PER_ATB;
}
GC_EXIT();
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table(&mp_plat_print);
#endif
// CIRCUITPY-CHANGE
#ifdef LOG_HEAP_ACTIVITY
gc_log_change(block, new_blocks);
#endif
2020-07-15 20:58:38 -04:00
#if CIRCUITPY_MEMORYMONITOR
2020-07-16 22:01:43 -04:00
memorymonitor_track_allocation(new_blocks);
2020-07-15 20:58:38 -04:00
#endif
return ptr_in;
}
// check if we can expand in place
if (new_blocks <= n_blocks + n_free) {
// mark few more blocks as used tail
size_t end_block = block + new_blocks;
for (size_t bl = block + n_blocks; bl < end_block; bl++) {
assert(ATB_GET_KIND(area, bl) == AT_FREE);
ATB_FREE_TO_TAIL(area, bl);
}
area->gc_last_used_block = MAX(area->gc_last_used_block, end_block);
GC_EXIT();
#if MICROPY_GC_CONSERVATIVE_CLEAR
// be conservative and zero out all the newly allocated blocks
memset((byte *)ptr_in + n_blocks * BYTES_PER_BLOCK, 0, (new_blocks - n_blocks) * BYTES_PER_BLOCK);
#else
// zero out the additional bytes of the newly allocated blocks (see comment above in gc_alloc)
memset((byte *)ptr_in + n_bytes, 0, new_blocks * BYTES_PER_BLOCK - n_bytes);
#endif
#if EXTENSIVE_HEAP_PROFILING
gc_dump_alloc_table(&mp_plat_print);
#endif
// CIRCUITPY-CHANGE
#ifdef LOG_HEAP_ACTIVITY
gc_log_change(block, new_blocks);
#endif
2020-07-15 20:58:38 -04:00
#if CIRCUITPY_MEMORYMONITOR
2020-07-16 22:01:43 -04:00
memorymonitor_track_allocation(new_blocks);
2020-07-15 20:58:38 -04:00
#endif
return ptr_in;
}
#if MICROPY_ENABLE_FINALISER
bool ftb_state = FTB_GET(area, block);
#else
bool ftb_state = false;
#endif
GC_EXIT();
if (!allow_move) {
// not allowed to move memory block so return failure
return NULL;
}
// can't resize inplace; try to find a new contiguous chain
void *ptr_out = gc_alloc(n_bytes, ftb_state);
// check that the alloc succeeded
if (ptr_out == NULL) {
return NULL;
2013-10-21 18:45:08 -04:00
}
DEBUG_printf("gc_realloc(%p -> %p)\n", ptr_in, ptr_out);
memcpy(ptr_out, ptr_in, n_blocks * BYTES_PER_BLOCK);
gc_free(ptr_in);
return ptr_out;
2013-10-21 18:45:08 -04:00
}
#endif // Alternative gc_realloc impl
2014-03-12 15:00:23 -04:00
void gc_dump_info(const mp_print_t *print) {
2014-02-11 11:01:38 -05:00
gc_info_t info;
gc_info(&info);
mp_printf(print, "GC: total: %u, used: %u, free: %u",
(uint)info.total, (uint)info.used, (uint)info.free);
#if MICROPY_GC_SPLIT_HEAP_AUTO
mp_printf(print, ", max new split: %u", (uint)info.max_new_split);
#endif
mp_printf(print, "\n No. of 1-blocks: %u, 2-blocks: %u, max blk sz: %u, max free sz: %u\n",
(uint)info.num_1block, (uint)info.num_2block, (uint)info.max_block, (uint)info.max_free);
2014-02-11 11:01:38 -05:00
}
void gc_dump_alloc_table(const mp_print_t *print) {
GC_ENTER();
static const size_t DUMP_BYTES_PER_LINE = 64;
for (mp_state_mem_area_t *area = &MP_STATE_MEM(area); area != NULL; area = NEXT_AREA(area)) {
#if !EXTENSIVE_HEAP_PROFILING
// When comparing heap output we don't want to print the starting
// pointer of the heap because it changes from run to run.
mp_printf(print, "GC memory layout; from %p:", area->gc_pool_start);
#endif
for (size_t bl = 0; bl < area->gc_alloc_table_byte_len * BLOCKS_PER_ATB; bl++) {
if (bl % DUMP_BYTES_PER_LINE == 0) {
// a new line of blocks
{
// check if this line contains only free blocks
size_t bl2 = bl;
while (bl2 < area->gc_alloc_table_byte_len * BLOCKS_PER_ATB && ATB_GET_KIND(area, bl2) == AT_FREE) {
bl2++;
}
if (bl2 - bl >= 2 * DUMP_BYTES_PER_LINE) {
// there are at least 2 lines containing only free blocks, so abbreviate their printing
mp_printf(print, "\n (%u lines all free)", (uint)(bl2 - bl) / DUMP_BYTES_PER_LINE);
bl = bl2 & (~(DUMP_BYTES_PER_LINE - 1));
if (bl >= area->gc_alloc_table_byte_len * BLOCKS_PER_ATB) {
// got to end of heap
break;
}
}
}
// print header for new line of blocks
// (the cast to uint32_t is for 16-bit ports)
mp_printf(print, "\n%08x: ", (uint)(bl * BYTES_PER_BLOCK));
}
int c = ' ';
switch (ATB_GET_KIND(area, bl)) {
case AT_FREE:
c = '.';
break;
/* this prints out if the object is reachable from BSS or STACK (for unix only)
case AT_HEAD: {
c = 'h';
void **ptrs = (void**)(void*)&mp_state_ctx;
mp_uint_t len = offsetof(mp_state_ctx_t, vm.stack_top) / sizeof(mp_uint_t);
for (mp_uint_t i = 0; i < len; i++) {
mp_uint_t ptr = (mp_uint_t)ptrs[i];
if (gc_get_ptr_area(ptr) && BLOCK_FROM_PTR(ptr) == bl) {
c = 'B';
break;
}
}
if (c == 'h') {
ptrs = (void**)&c;
len = ((mp_uint_t)MP_STATE_THREAD(stack_top) - (mp_uint_t)&c) / sizeof(mp_uint_t);
for (mp_uint_t i = 0; i < len; i++) {
mp_uint_t ptr = (mp_uint_t)ptrs[i];
if (gc_get_ptr_area(ptr) && BLOCK_FROM_PTR(ptr) == bl) {
c = 'S';
break;
}
}
}
break;
}
*/
/* this prints the uPy object type of the head block */
case AT_HEAD: {
// CIRCUITPY-CHANGE: compiler warning avoidance
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wcast-align"
void **ptr = (void **)(area->gc_pool_start + bl * BYTES_PER_BLOCK);
#pragma GCC diagnostic pop
if (*ptr == &mp_type_tuple) {
c = 'T';
} else if (*ptr == &mp_type_list) {
c = 'L';
} else if (*ptr == &mp_type_dict) {
c = 'D';
} else if (*ptr == &mp_type_str || *ptr == &mp_type_bytes) {
c = 'S';
}
#if MICROPY_PY_BUILTINS_BYTEARRAY
else if (*ptr == &mp_type_bytearray) {
c = 'A';
}
#endif
#if MICROPY_PY_ARRAY
else if (*ptr == &mp_type_array) {
c = 'A';
}
#endif
#if MICROPY_PY_BUILTINS_FLOAT
else if (*ptr == &mp_type_float) {
c = 'F';
}
#endif
else if (*ptr == &mp_type_fun_bc) {
c = 'B';
} else if (*ptr == &mp_type_module) {
c = 'M';
} else {
c = 'h';
#if 0
// This code prints "Q" for qstr-pool data, and "q" for qstr-str
// data. It can be useful to see how qstrs are being allocated,
// but is disabled by default because it is very slow.
for (qstr_pool_t *pool = MP_STATE_VM(last_pool); c == 'h' && pool != NULL; pool = pool->prev) {
if ((qstr_pool_t *)ptr == pool) {
c = 'Q';
break;
}
for (const byte **q = pool->qstrs, **q_top = pool->qstrs + pool->len; q < q_top; q++) {
if ((const byte *)ptr == *q) {
c = 'q';
break;
}
}
}
#endif
}
break;
}
case AT_TAIL:
c = '=';
break;
case AT_MARK:
c = 'm';
break;
}
mp_printf(print, "%c", c);
2013-10-22 10:25:25 -04:00
}
mp_print_str(print, "\n");
2013-10-22 10:25:25 -04:00
}
GC_EXIT();
2013-10-22 10:25:25 -04:00
}
#if 0
// For testing the GC functions
void gc_test(void) {
mp_uint_t len = 500;
mp_uint_t *heap = malloc(len);
gc_init(heap, heap + len / sizeof(mp_uint_t));
2013-10-21 18:45:08 -04:00
void *ptrs[100];
{
mp_uint_t **p = gc_alloc(16, false);
p[0] = gc_alloc(64, false);
p[1] = gc_alloc(1, false);
p[2] = gc_alloc(1, false);
p[3] = gc_alloc(1, false);
mp_uint_t ***p2 = gc_alloc(16, false);
2013-10-21 18:45:08 -04:00
p2[0] = p;
p2[1] = p;
ptrs[0] = p2;
}
for (int i = 0; i < 25; i += 2) {
mp_uint_t *p = gc_alloc(i, false);
2013-10-21 18:45:08 -04:00
printf("p=%p\n", p);
if (i & 3) {
// ptrs[i] = p;
}
}
printf("Before GC:\n");
gc_dump_alloc_table(&mp_plat_print);
printf("Starting GC...\n");
gc_collect_start();
gc_collect_root(ptrs, sizeof(ptrs) / sizeof(void *));
gc_collect_end();
printf("After GC:\n");
gc_dump_alloc_table(&mp_plat_print);
2013-10-21 18:45:08 -04:00
}
#endif
#endif // MICROPY_ENABLE_GC