all: Unify header guard usage.
The code conventions suggest using header guards, but do not define how
those should look like and instead point to existing files. However, not
all existing files follow the same scheme, sometimes omitting header guards
altogether, sometimes using non-standard names, making it easy to
accidentally pick a "wrong" example.
This commit ensures that all header files of the MicroPython project (that
were not simply copied from somewhere else) follow the same pattern, that
was already present in the majority of files, especially in the py folder.
The rules are as follows.
Naming convention:
* start with the words MICROPY_INCLUDED
* contain the full path to the file
* replace special characters with _
In addition, there are no empty lines before #ifndef, between #ifndef and
one empty line before #endif. #endif is followed by a comment containing
the name of the guard macro.
py/grammar.h cannot use header guards by design, since it has to be
included multiple times in a single C file. Several other files also do not
need header guards as they are only used internally and guaranteed to be
included only once:
* MICROPY_MPHALPORT_H
* mpconfigboard.h
* mpconfigport.h
* mpthreadport.h
* pin_defs_*.h
* qstrdefs*.h
2017-06-29 17:14:58 -04:00
|
|
|
#ifndef MICROPY_INCLUDED_ZEPHYR_MODMACHINE_H
|
|
|
|
|
#define MICROPY_INCLUDED_ZEPHYR_MODMACHINE_H
|
zephyr: Initial implementation of machine.Pin.
The integration with Zephyr is fairly clean but as MicroPython Hardware API
requires pin ID to be a single value, but Zephyr operates GPIO in terms of
ports and pins, not just pins, a "hierarchical" ID is required, using tuple
of (port, pin). Port is a string, effectively a device name of a GPIO port,
per Zephyr conventions these are "GPIO_0", "GPIO_1", etc.; pin is integer
number of pin with the port (supposed to be in range 0-31).
Example of pin initialization:
pin = Pin(("GPIO_1", 21), Pin.OUT)
(an LED on FRDM-K64F's Port B, Pin 21).
There is support for in/out pins and pull up/pull down but currently
there is no interrupt support.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2016-09-28 17:22:42 -04:00
|
|
|
|
|
|
|
|
#include "py/obj.h"
|
|
|
|
|
|
|
|
|
|
extern const mp_obj_type_t machine_pin_type;
|
2022-10-06 14:28:31 -04:00
|
|
|
extern const mp_obj_type_t machine_i2c_type;
|
|
|
|
|
extern const mp_obj_type_t machine_spi_type;
|
2020-11-24 09:59:04 -05:00
|
|
|
extern const mp_obj_type_t machine_uart_type;
|
zephyr: Initial implementation of machine.Pin.
The integration with Zephyr is fairly clean but as MicroPython Hardware API
requires pin ID to be a single value, but Zephyr operates GPIO in terms of
ports and pins, not just pins, a "hierarchical" ID is required, using tuple
of (port, pin). Port is a string, effectively a device name of a GPIO port,
per Zephyr conventions these are "GPIO_0", "GPIO_1", etc.; pin is integer
number of pin with the port (supposed to be in range 0-31).
Example of pin initialization:
pin = Pin(("GPIO_1", 21), Pin.OUT)
(an LED on FRDM-K64F's Port B, Pin 21).
There is support for in/out pins and pull up/pull down but currently
there is no interrupt support.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2016-09-28 17:22:42 -04:00
|
|
|
|
|
|
|
|
MP_DECLARE_CONST_FUN_OBJ_0(machine_info_obj);
|
|
|
|
|
|
|
|
|
|
typedef struct _machine_pin_obj_t {
|
|
|
|
|
mp_obj_base_t base;
|
2020-09-12 15:50:21 -04:00
|
|
|
const struct device *port;
|
zephyr: Initial implementation of machine.Pin.
The integration with Zephyr is fairly clean but as MicroPython Hardware API
requires pin ID to be a single value, but Zephyr operates GPIO in terms of
ports and pins, not just pins, a "hierarchical" ID is required, using tuple
of (port, pin). Port is a string, effectively a device name of a GPIO port,
per Zephyr conventions these are "GPIO_0", "GPIO_1", etc.; pin is integer
number of pin with the port (supposed to be in range 0-31).
Example of pin initialization:
pin = Pin(("GPIO_1", 21), Pin.OUT)
(an LED on FRDM-K64F's Port B, Pin 21).
There is support for in/out pins and pull up/pull down but currently
there is no interrupt support.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2016-09-28 17:22:42 -04:00
|
|
|
uint32_t pin;
|
2020-06-14 02:22:56 -04:00
|
|
|
struct _machine_pin_irq_obj_t *irq;
|
zephyr: Initial implementation of machine.Pin.
The integration with Zephyr is fairly clean but as MicroPython Hardware API
requires pin ID to be a single value, but Zephyr operates GPIO in terms of
ports and pins, not just pins, a "hierarchical" ID is required, using tuple
of (port, pin). Port is a string, effectively a device name of a GPIO port,
per Zephyr conventions these are "GPIO_0", "GPIO_1", etc.; pin is integer
number of pin with the port (supposed to be in range 0-31).
Example of pin initialization:
pin = Pin(("GPIO_1", 21), Pin.OUT)
(an LED on FRDM-K64F's Port B, Pin 21).
There is support for in/out pins and pull up/pull down but currently
there is no interrupt support.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
2016-09-28 17:22:42 -04:00
|
|
|
} machine_pin_obj_t;
|
|
|
|
|
|
2020-06-14 02:22:56 -04:00
|
|
|
void machine_pin_deinit(void);
|
|
|
|
|
|
all: Unify header guard usage.
The code conventions suggest using header guards, but do not define how
those should look like and instead point to existing files. However, not
all existing files follow the same scheme, sometimes omitting header guards
altogether, sometimes using non-standard names, making it easy to
accidentally pick a "wrong" example.
This commit ensures that all header files of the MicroPython project (that
were not simply copied from somewhere else) follow the same pattern, that
was already present in the majority of files, especially in the py folder.
The rules are as follows.
Naming convention:
* start with the words MICROPY_INCLUDED
* contain the full path to the file
* replace special characters with _
In addition, there are no empty lines before #ifndef, between #ifndef and
one empty line before #endif. #endif is followed by a comment containing
the name of the guard macro.
py/grammar.h cannot use header guards by design, since it has to be
included multiple times in a single C file. Several other files also do not
need header guards as they are only used internally and guaranteed to be
included only once:
* MICROPY_MPHALPORT_H
* mpconfigboard.h
* mpconfigport.h
* mpthreadport.h
* pin_defs_*.h
* qstrdefs*.h
2017-06-29 17:14:58 -04:00
|
|
|
#endif // MICROPY_INCLUDED_ZEPHYR_MODMACHINE_H
|
