djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aa0cf873bf
circuitpython/ports/mimxrt/boards/MIMXRT1060_EVK/flash_config.c

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

123 lines
5.8 KiB
C
Raw Normal View History

mimxrt/boards: Add MIMXRT1060_EVK board.
2020-05-07 04:47:48 -04:00
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1060_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = 8u * 1024u * 1024u,
.lookupTable =
{
mimxrt: Add flash storage support with VFS and littlefs filesystem. This commit adds full support for a filesystem on all boards, with a block device object mimxrt.Flash() and uos.VfsLfs2 enabled. Main changes are: - Refactoring of linker scripts to accomodate reserved area for VFS. VFS will take up most of the available flash. 1M is reserved for code. 9K is reserved for flash configuration, interrupts, etc. - Addition of _boot.py with filesystem init code, called from main.c. - Definition of the mimxrt module with a Flash class in modmimxrt.[ch]. - Implementation of a flash driver class in mimxrt_flash.c. All flashing related functions are stored in ITCM RAM. - Addition of the uos module with filesystem functions. - Implementation of uos.urandom() for the sake of completeness of the uos module. It uses sample code from CircuitPython supplied under MIT license, which uses the NXP SDK example code. Done in collaboration with Philipp Ebensberger aka @alphaFred who contributed the essential part to enable writing to flash while code is executing, among other things.
2021-05-07 09:21:09 -04:00
// 0 Read LUTs 0 -> 0
mimxrt/boards: Add MIMXRT1060_EVK board.
2020-05-07 04:47:48 -04:00
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
mimxrt: Add flash storage support with VFS and littlefs filesystem. This commit adds full support for a filesystem on all boards, with a block device object mimxrt.Flash() and uos.VfsLfs2 enabled. Main changes are: - Refactoring of linker scripts to accomodate reserved area for VFS. VFS will take up most of the available flash. 1M is reserved for code. 9K is reserved for flash configuration, interrupts, etc. - Addition of _boot.py with filesystem init code, called from main.c. - Definition of the mimxrt module with a Flash class in modmimxrt.[ch]. - Implementation of a flash driver class in mimxrt_flash.c. All flashing related functions are stored in ITCM RAM. - Addition of the uos module with filesystem functions. - Implementation of uos.urandom() for the sake of completeness of the uos module. It uses sample code from CircuitPython supplied under MIT license, which uses the NXP SDK example code. Done in collaboration with Philipp Ebensberger aka @alphaFred who contributed the essential part to enable writing to flash while code is executing, among other things.
2021-05-07 09:21:09 -04:00
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 1 Read status register -> 1
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x01),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 2 Fast read quad mode - SDR
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x6B, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x08, READ_SDR, FLEXSPI_4PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 3 Write Enable -> 3
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 4 Read extend parameters
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x81, READ_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 5 Erase Sector -> 5
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 6 Write Status Reg
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01, WRITE_SDR, FLEXSPI_1PAD, 0x04),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 7 Page Program - quad mode (-> 9)
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x32, RADDR_SDR, FLEXSPI_1PAD, 0x18),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_4PAD, 0x04, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 8 Read ID
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x90, DUMMY_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(READ_SDR, FLEXSPI_1PAD, 0x00, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 9 Page Program - single mode -> 9
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02, RADDR_SDR, FLEXSPI_1PAD, 24),
FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0, 0, 0, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 10 Enter QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 11 Erase Chip
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
// 12 Exit QPI mode
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_4PAD, 0xF5, STOP, FLEXSPI_1PAD, 0),
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
FLEXSPI_LUT_SEQ(0, 0, 0, 0, 0, 0), // Filler
mimxrt/boards: Add MIMXRT1060_EVK board.
2020-05-07 04:47:48 -04:00
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 64u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */
Reference in New Issue Copy Permalink